Related
I ordered those from eBay for around $15, they just arrived today. Tried to apply body protector first. Body protector is made out of 5 pieces and no matter how hard you would try to fit them, it's impossible to get them to stick nicely and not move. Started with the battery cover piece that's the largest and easiest to apply, it turned out to be just a little too big and when I put battery cover back on the of the phone, sides of the protector unglued and let the air under them which created bubbles. Tried side protector next, but that thing is impossible to fit. Gave up on the whole body protector and though to just apply screen protector and keep my gel case for now.
Screen protector is of the most horrible quality I've ever seen in my life! It's so grainy, it looks like my screen has a resolution of about 100x40 after application. More than that I'm not sure if it's because I used soaped water (as per instructions) or for some other reason, but parts of the screen-protector actually turned grey (against black background), some other parts are a bit clearer, but still, grain kills the whole thing. Ripped it off and will be waiting for some better screen-protectors to show up on the market.
Don't waist your money on those.
Great I just ordered one a few days ago.
olieebur said:
Great I just ordered one a few days ago.
Click to expand...
Click to collapse
same here...
I almost ordered one but then I got the zagg screen only with 20% off. When I receive it I let you guys know.
Sent from my SAMSUNG-SGH-I897 using XDA App
LGSilva said:
I almost ordered one but then I got the zagg screen only with 20% off. When I receive it I let you guys know.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Same here
My Zagg should be here tomorrow
I ordered a similar protector from clearfreak (they were the only ones selling a protector for the captivate when I ordered about 10 days ago), and it came in the other day. While the material itself seemed about on par with the zagg protectors (I've used Zagg before), the screen protector was a bit too big, so theres a bubble going across the top where the protector wraps around the top of the phone.
I see that zagg has protectors now, so I guess I'll get one of those. They seem to have changed up their offerings a bit, they offer full body "maximum coverage" and "easy install"; can anyone tell me how difficult the maximum coverage protector is to apply? I've done a zagg full body install on my zune hd, so I understand that these things are a bit tricky to get on just right, but I want to know if the full body is significantly harder than the easy install one with a bit less coverage.
How is the touch screen after you put on the screen protector? I have had a few that really seemed to mess with the touch screen. It seemed like it took twice as much pressure for it to react.
Is that the case with the captivate as well?
Pmac25 said:
How is the touch screen after you put on the screen protector? I have had a few that really seemed to mess with the touch screen. It seemed like it took twice as much pressure for it to react.
Is that the case with the captivate as well?
Click to expand...
Click to collapse
Capacitive touchscreens aren't pressure sensitive, so protector or not, how hard you press shouldn't make a difference. That being said, I have a Zagg invisibleshield on my zune hd, and it hasn't affected the touch sensitivity at all.
I've used BodyGuardz and Zagg before. The one piece of advice I have is, instead of using the soaped water they give you, use isopropyl (rubbing) alcohol. It lets you slide the cover to the correct position very easily and will just evaporate out from under the cover, leaving no bubbles. I had a super clean install on my HTC Pure that way. To be safe I'd also remove the battery and make sure the phone has plenty of time to dry before you turn it on again. Also, if you enter ZAGG's weekly iPad giveaway thingy they have been giving out 40 and 50% off coupon codes.
I just got the AT&T screen protectors (pack of 3 for $10). I actiually got it for 5 (50% off through FAN account) and they are of good quality, clear and fit perfectly. There's even a cutout for the earpiece speaker and light and proximity sensors.
The two AT&T stores I went to did not have them but the AT&T smaller stores in the malls did.
I got the full body Invisible Gadget Guard, and mine looks fine. I didn't use soapy water, just plain old water, and everything fits perfectly, except for when I was dipping it in the bowl of water it snagged on the side of the bowl and when I made the mistake of trying to pull it off, it stretched, but I just cut it to fit and it's hardly noticeable.
Although, I won't lie. I did order the Zagg front screen protector for the fact that I know it works. I did the infamous "key test" on this cheap one, and it performed surprisingly well..
But it's not completely a rip-off if done right, especially for the $5 I paid.
milkman1026 said:
I got the full body Invisible Gadget Guard, and mine looks fine. I didn't use soapy water, just plain old water, and everything fits perfectly, except for when I was dipping it in the bowl of water it snagged on the side of the bowl and when I made the mistake of trying to pull it off, it stretched, but I just cut it to fit and it's hardly noticeable.
Although, I won't lie. I did order the Zagg front screen protector for the fact that I know it works. I did the infamous "key test" on this cheap one, and it performed surprisingly well..
But it's not completely a rip-off if done right, especially for the $5 I paid.
Click to expand...
Click to collapse
you paid 5 bucks?
Let us know when you all get your Zagg Invisible Shield protectors in. I am trying to decide between Zagg and BodyGuardz. I haven't used either but I love the device entire too much to cover with a case.
With a 45 day money back guarantee, surely it cannot be that bad for the $24.
I bought the Invisible Gadget Guard off Ebay as well for $13.97 with a free car charger. I used just water to get it on. At first, it felt and looked awful but given 2 days, everything smoothed out and I was able to get all bubbles off. It's actually pretty nice now. I had to snip a little of the sides because I stretched it a little too long, but that's not a big deal.
I have a Zagg on my Zune HD, and initially I felt like it was a bit rubbery, but I left it on to see what happened, and after a week or so, it didn't feel rubbery anymore to me. You have to be really careful with the installation, make sure you dont get any dust/debris under the protector, but after that you can throw it in your pocket without any worries.
I got a phantomskinz for my captivate, since it ended up being similar in price to the Zagg but comes with 2 instead of one, and I'll post back here with impressions once it comes in.
dappy15 said:
I bought the Invisible Gadget Guard off Ebay as well for $13.97 with a free car charger. I used just water to get it on. At first, it felt and looked awful but given 2 days, everything smoothed out and I was able to get all bubbles off. It's actually pretty nice now. I had to snip a little of the sides because I stretched it a little too long, but that's not a big deal.
Click to expand...
Click to collapse
do you have any pic?
accinfo said:
do you have any pic?
Click to expand...
Click to collapse
I'll try to get a pic up tonight.
I bought it and it was total crap. Waste of money!
Well I just finished installing this, and TBH it wasn't that bad... I've done many type of film installations on cars and stuff and it was very similar to doing it on the phone. I took my time with it and I am actually very satisfied with the result. It gives the phone a very needed grippy feel. Some pieces weren't the most perfect size to fit but it covered most of the area pretty well. I will got some pictures up later tonight. You really have to take your time with this installation or get a professional to do it, other wise you will end up like some people on here not very satisfied at all.
dappy15 said:
I'll try to get a pic up tonight.
Click to expand...
Click to collapse
I've had it on for a week now and I've grown to like it quite a bit. Still considering getting a case since it won't protect it from drops.
Hello All,
I know that I want a PET or other glass-like screen protector. Generally speaking, I never used screen protectors because they never really held up all that well and on top of that they never had the feel or look of the real thing. Now I have a scratch on my screen that is not normally visible, but I know its there.
I have run into a debacle because I know that while I am good at putting on screen protectors, I am no expert and the PET ones are harder to get perfect than the rubbery ones (which I now despise). So, recently I have seen that there are some PET/Silicone/ Electrostaic Hybrid screen protetctors and then there are still the PET with Adhesive.
Does anyone have experience with the electrostatic type and how good are they at staying on and bubbles?
I have no idea what is PET, or the different types. However, if you are talking about the one I got:
http://www.handhelditems.com/crystal-clear-screen-protector-p-135710.html
my experience is that this has great clarity, can get bubbles during applications, and they rarely come off by itself. On the many devices I've used this type of protector on, only one came off. It started in one corner, and over the course of a month with gradual lint build up the screen protector eventually got ruined. I could've washed it and reapplied for that month, but I had a spare so I was lazy. You can reapply the protectors as needed to get the application right. The bubbles that occur aren't the same as the rubbery kind. Air bubbles can easily be pushed out after application. The problem is dust that prevent the protector from adhering to screen, causing a little bubble. If the dust is really small, the bubble goes away over a day. Or, like me, you can live with it. You try getting something the size of an iPad dust free.
Bought Electrostatic - LOVE THESE!
Ok, as a preface I have owned and used screen protectors before.
I had an iPhone before the EVO and used the Griffin Ultraclear hard Protetctors ad the PowerSupportUSA products of every variety on my previous iPod products (iPod Mini 1G, 4G, Nano 1G, 5G, Shuffle 1G, Touch, iPhone) not to mention an invisible shield one or two. I gave up on the films towards the end of my Touch ownership. They always felt horrible and I could never get one absolutely perfect (didn't help that they usually were not perfectly cut).
For the Evo, I tried the InvisibleShield the first day because I remembered just how well the InvisibileShield had held up on my 5G. Well I think that they have changed the formula, or rather that 3M has since then because the smooth feel and smooth look of the original are most definitely gone. The new variety is rubbery (even after days of use) and is not cut well enough to be a perfect fit (it never covered edge to edge). So i skipped it. Well it seems that with this large of a glass screen, you are much more liable to getting scratches (versus using and unprotetcted iPhone/Touch screen) and I got a few ultra hairline ones that are barely if ever visible to the naked eye and just knowing that they are there bothered me. So I needed to think of getting a screen protector.
Seeing as how air moves and its nearly impossible to get a screen protectors on without any bit of dust, I decided on getting the electrostatic variety so that I could rinse if it came off or needed to be reapplied.
I bought These: Electrostatic Screen Protector - Clear Hard
- Hard variety (PET)
- Very Clear
- Silicone Layer (helps the scratches and dents heal themselves and give sturdiness to the PET)
- Electrostatic layer (holds the screen protector onto the phone)
Six pack delivered for $4? I could do much worse.
Well as it turns out, they are PERFECTLY cut and cover every inch of screen and no more. It went on smooth as butter and I got no bubbles or dust or fingerprints or anything (used a credit card to smooth it down). These were by far the easiest I have had. Not only that, but the electrostatic holds on just as strong as the sticky variety and will not get the gunk on the sides sticking to it! I have taken my TPU case on and off a bunch and had no lift whatsoever. As a bonus, THEY SHOW FINGERPRINTS MUCH LESS THAN THE GLASS SCREEN DOES!
So at $0.65 each, they are killer and having a few backups is nice as well as giving one to a friend.
Cheers!
Thanks for that post. I'm expecting my EVOs (I ordered 2) in within the next week. I've been trying hard to find cases and screen protectors without much luck, but I'm going to go ahead and order those screen protectors you mentioned since you recommend them.
Yep i ordered the same ones and love them. i have loved these from the start. they are quite easy to put on and stay on well.
Scotch tape is your friend in getting screen protectors on without a bit of dust
Childofthehorn said:
Hello All,
I know that I want a PET or other glass-like screen protector. Generally speaking, I never used screen protectors because they never really held up all that well and on top of that they never had the feel or look of the real thing. Now I have a scratch on my screen that is not normally visible, but I know its there.
I have run into a debacle because I know that while I am good at putting on screen protectors, I am no expert and the PET ones are harder to get perfect than the rubbery ones (which I now despise). So, recently I have seen that there are some PET/Silicone/ Electrostaic Hybrid screen protetctors and then there are still the PET with Adhesive.
Does anyone have experience with the electrostatic type and how good are they at staying on and bubbles?
Click to expand...
Click to collapse
I have a steinheil ultra crystal protector on my EVO, and its static. As long as you make sure there is no debris under it, it will stay on for a long time with no lifting. I have shown my phone to quite a few people, and not one of them can tell I have a screen protector on it. Even when I point it out to them, they still cant see it. It's very thin and I applied it perfectly so their a no bubbles. Took me about 30 minutes to get it perfect. If you use a piece of scotch tape to pick up debris under it, that works pretty good. This biggest thing is to make sure your edges are perfectly clean. Even the slightest bit of debris under one of the edges of the screen protector, and it wont be long before it starts peeling. I'm very satisfied with my steinheil. Going on 5 weeks now and it looks flawless. Id take a picture but you wouldnt be able to see it anyways. I thought it was a scam spending $13 on a screen protector! I used to order them from china for 50 cents. well, never doing that again! I've only ever used 1 adhesive type screen protector, and it was terrible. the clarity was awful.
OneStepAhead said:
I have a steinheil ultra crystal protector on my EVO, and its static. As long as you make sure there is no debris under it, it will stay on for a long time with no lifting. I have shown my phone to quite a few people, and not one of them can tell I have a screen protector on it. Even when I point it out to them, they still cant see it. It's very thin and I applied it perfectly so their a no bubbles. Took me about 30 minutes to get it perfect. If you use a piece of scotch tape to pick up debris under it, that works pretty good. This biggest thing is to make sure your edges are perfectly clean. Even the slightest bit of debris under one of the edges of the screen protector, and it wont be long before it starts peeling. I'm very satisfied with my steinheil. Going on 5 weeks now and it looks flawless. Id take a picture but you wouldnt be able to see it anyways. I thought it was a scam spending $13 on a screen protector! I used to order them from china for 50 cents. well, never doing that again! I've only ever used 1 adhesive type screen protector, and it was terrible. the clarity was awful.
Click to expand...
Click to collapse
Have not seen these yet. where did you get yours and do you know if they offer an anti-glare
xlrdxrevengex said:
Have not seen these yet. where did you get yours and do you know if they offer an anti-glare
Click to expand...
Click to collapse
Their anti-fingerprint screen protector is also anti-glare per the product description on their website.
http://www.sgpstore.com/product_info.php/cPath/23_33/products_id/1463
remedy22 said:
Their anti-fingerprint screen protector is also anti-glare per the product description on their website.
http://www.sgpstore.com/product_info.php/cPath/23_33/products_id/1463
Click to expand...
Click to collapse
thanks for the link. Can anyone find this brand cheaper
xlrdxrevengex said:
thanks for the link. Can anyone find this brand cheaper
Click to expand...
Click to collapse
I don't think so.
But these are $13 well spent. Believe me.
~fb
I have the device for some time now, I clean the screen when it dirty, and when not used, it either docked in it's dock for charge, or stored in my SENA leather pouch, is there still any need for a screen protector? I do baby my devices, I have some old SE K800, that now my mom use, and except some very little scratches, on the screen (it actually made of glass with some nice layer of anti reflect :good, it looks like new, I don't put my devices in pockets of my jeans or so, as I always go around with a backpack with all my stuff, be the smartphone in separate pocket.
I read some thread around the net, from what I understood, there a couple types of screen protectors:
dry or wet installation, and glare or anti glare, some has oleophobic layer, there even a glass protector to protect the glass to protect the glas LOL.
I do like how anti glare once, look indoors, and outdoors, but as for the quality of the display quality, it not worth it, you have an HD resolution display, even though it's a PenTile type, it still on paper has HD resolution, anti glare just make it look so bad, I don't know how the more pricey ones, work with it, but if I compare it to my 24" IPS DELL computer display, it's difference of day and night (and in negative form, DELL is much better), so yes I do hate the glare, it much easier to read from matte display, but it the manufacturer thought it need to be glare, and there no option to choose matte or glare (like you have in let say, laptops), I don't know how you guys like anti glare screen protectors.
Then there the standard screen protector we all know, the problem is, they just don't feel like the sleek cool glass, it harder to swipe, and play games with them, I know it's not Gorilla glass, but I just hate to buy a device for resale value, I like all about it, and I don't have the money to replace device every then and now, also I don't run after the newest and best devices at all, when I understood I need a NEXUS, then all I buy is NEXUS, just for the NEXUS experience, and thats basicly all I care about, not that much about the specs, as I don't have so much of a choice, because it's NEXUS.
Also, I just hate dry installation screen protectors, and the one, that we have for the device, not cover all the screen, because it curved, so I maybe consider, a wet installation protector, but then again, they from what I seed, has a weird orange peel feel, and they not feel like the glass, at all, so I just don't know, do I need or don't ? I just like to feel the device, like it is, actually I use the SENA pouch, because I use the dock to charge the device, and don't want to wear the USB port, and that the best and only choice, that feel and looks nice, and protect the device very well, also the screen. as it inside made of soft velvet material, and also, I just can't use any other type of case, as I need it be easily removed from the device, when I need a charge, if I did..the case would wear and tear very fast, and get scratched, and what not.
Thoughts?
I ran a screen protector on my old Galaxy SII and it was fine. However I tried to install a screen protector on my GNEX and because of the curved glass it just wouldnt install good enough for me. So I don't have one. I have owned the phone for almost a year now and no major scratches. I don't use a case either, a few minor dings from small drops but nothing to bad. This phone is pretty tough, at least for me.
I don't want to be paranoid it'll scratch, the thing is, that again, when it not in use, the screen get scratch protection, when in the SENA case, but I want to preserve it for at least some years, or till Google stop update it. in conclusion: anti-glare is good for direct light source, but damage the image quality; wet apply is easy to install, but feels like orange peel LOL, and looks like orange peel; so my only option is normal screen protector then, but which?
There are chapo eBay like 10 for 5$ or so, are they any good? just don't feel like wasting my money for accessory, that I may not like, and another problem, it's problematic to resell, it's not a case or bluetooth speaker..
Maybe some manufacturers has some money back program, if the customer not satisfied with they product? What is the best screen protector out there that:
1. don't cover the edges of the display
2. has oleophobic layer, just like the GNEX screen has?
3. reduce some glare, but not matte type
*If there a wet install protector, that actually feel good, and not rubbery, I also welcome it.
I have used them in the past, but the screen is so much better without them. I take the minor scratches (those you only see under a certain angle/lighting) with it. I have the phone most of the time in the pocket of my jeans. I do remove any dirt/sand from my pocket one a day.
And the oleophobic layer is good for a month ore so, it wears of quickly.
I have a Spigen SGP screen protector since I bought my GNex ad i?m totally satisfied about it.
---------- Post added at 04:26 PM ---------- Previous post was at 04:21 PM ----------
Edit.
Have just started using a extreme guard wet apply protector, but some people don't like it. It's fine with me honestly, grabbed one since it was like 5 bucks for 2 including international shipping. The oleophobic coating on the gnex wears out fast, feels good at first, then it's kind of rough when it wears out a little, one of the motivating factor I got a screen protector as well.
Beamed from my Maguro
if possible, use various films..
You may find the film you like whether it is needed or not.
Generally with a screen protector you feel more confident and convenient
i offer Buff ones.so perfect...
Had an anti-glare.....didn't like it.
My cat likes to gnaw on my phone so the screen protector now has a few scratches, unlike the screen.
Best ones I've ever used were from Bodyguardz. I had to smash my phone screen in a rock to get out of a jam and it didn't even hurt the phone. They also don't change the look of the screen at all like anti glare ones will. Only thing better would likely be the tempered glass variety.
past_pluto said:
Best ones I've ever used were from Bodyguardz. I had to smash my phone screen in a rock to get out of a jam and it didn't even hurt the phone. They also don't change the look of the screen at all like anti glare ones will. Only thing better would likely be the tempered glass variety.
Click to expand...
Click to collapse
What kind of a jam would you need to smash your phone screen to get out of???
iamsteveu2 said:
What kind of a jam would you need to smash your phone screen to get out of???
Click to expand...
Click to collapse
Taking pics too close to flood waters full of rocks and was swept into them. Had my phone in hand whole time. Even soaked the phone but worked next day after it dried. And no marks on the screen at all
Yes
Sent from my Nexus 7 using XDA Premium 4 mobile app
1 year and a half with my GNexus without screen protector, no scratches yet but I think I got luck, dropped 2 times but always on the back side
I buy this one at January of this year and for sure its best screen protector i find, The pack have 3 but i only use one and dont need to replace yet.
No marks, no texture, very good deal in my opinion.
Search on Ebay for "New 3x CLEAR Screen Protector Guard Cover Film Samsung Google Galaxy Nexus i9250" the vendor name is "rockymobile"
I
Same here.. Never used a screen protector and never had a need for one.. Even with my keys in the same pocket I've never scratched my screen.
Sent from my Galaxy Nexus using xda app-developers app
my solution is using a "smaller" size protector which is not cutting according the glass size. It avoids to fit the curved face so the protector signally smaller then the screen glass. I found this type of the protector on the shop and still using it happily. It is petty match with the soft case because the soft case will covered the curved face that protector doesn't. And you don't worry the soft case will tilt the protector up.
I vote no.
Had 1 on 6 months ago since it was included/installed when I purchased, along with a rubber case.
But after testing out another GN without it, it just felt so much smoother, so took it off, but keep the case, which helps keep a grip from slips/drops
I use protector from 1 year ago and I dont have problems using touch and everything is smooth.
Sent from my Galaxy Nexus using Tapatalk
I just thought I should share a valuable lesson: DON'T BUY CHEAP SCREEN PROTECTORS!
I have been fine in the past with cheap screen protectors from eBay. They got the job done, and they were only a dollar or two. And you got six of them.
Anticipating the arrival of my N5, I bought a Spigen Neo-Hybrid case (Which is excellent), and some cheap screen protectors for $2. (12 to be exact)
http://www.ebay.com/itm/231089059032?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
I bought a bunch because that gives ample headroom if you mess up a few times.
I try to install the first one, and it ends up with bubbles near the cutouts for the speaker and camera. Okay, I'll just try another one.
I've gone through six of them, and they all have the same bubble problem near the cutouts.
I ended up buying higher-end screen protectors: http://www.amazon.com/gp/product/B00EV97UD6/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
I'll be sure to report on those when they arrive.
But the lesson is to be cautious with cheap screen protectors.
The xtremeguard screen protectors are really good, and they can be found for under $2.
mprasolov said:
I just thought I should share a valuable lesson: DON'T BUY CHEAP SCREEN PROTECTORS!
I have been fine in the past with cheap screen protectors from eBay. They got the job done, and they were only a dollar or two. And you got six of them.
Anticipating the arrival of my N5, I bought a Spigen Neo-Hybrid case (Which is excellent), and some cheap screen protectors for $2. (12 to be exact)
http://www.ebay.com/itm/231089059032?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
I bought a bunch because that gives ample headroom if you mess up a few times.
I try to install the first one, and it ends up with bubbles near the cutouts for the speaker and camera. Okay, I'll just try another one.
I've gone through six of them, and they all have the same bubble problem near the cutouts.
I ended up buying higher-end screen protectors: http://www.amazon.com/gp/product/B00EV97UD6/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
I'll be sure to report on those when they arrive.
But the lesson is to be cautious with cheap screen protectors.
Click to expand...
Click to collapse
I've got some of the iSmooth protectors and they are quite good...once I properly installed them. Dry apply are a little tricky but there are enough tutorials and videos to help. I also have the Neo Hybrid and I'm quite happy with it.
BigOkie said:
I've got some of the iSmooth protectors and they are quite good...once I properly installed them. Dry apply are a little tricky but there are enough tutorials and videos to help. I also have the Neo Hybrid and I'm quite happy with it.
Click to expand...
Click to collapse
I guess I lucked out with my choice of screen protector!
Not necessarily. I bought these SAMAR crystal clear screen protectors, managed to apply one without getting any dust or air bubbles. It has all the cutouts, the fit is good, and it is quite smooth when swiping, very happy with it so far. To top it all off it is dirt cheap and you get 6 protectors all with cleaning cloths! I've read others on here who have been happy with this brand too. Would definitely recommend.
use a drop of water when u install. it'll help take out bubbles.
also you can reapply these, just rinse in soap water then water, then shake off excess and apply. squeegee out the water - should be next to nothing.
ktamondo said:
The xtremeguard screen protectors are really good, and they can be found for under $2.
Click to expand...
Click to collapse
True. And even with that. I got one first and tested before I got backups.
I use an IQshield screen protector and it's nothing short of pure awesome. No bubbles at all, and it's so smooth and dried hard. It feels like glass.
You get what you pay for. I bought the spiegen Crystal for 10 bucks and they went on perfect and looked perfect and felt pretty good to you cant even tell its on unless you look at the earpiece closely. But there's always better! I just recently bought a Nillkin Glass screen protector with 9h hardness and olephobic with rounded edges and its gonna be getting here in a week or so and that should be way better than a cheap or high quality screen protector!
This sounds silly, but whenever I install a cheap screen protector, I do two things: first, i make sure the side that's going to be applied to the screen is FACE DOWN. Never face it up, under any circumstances. if I do, its before removing from packaging. I even remove the adhesive that protects the protector itself, with the screen protector face down. this doesn't give a chance for dust to sit on the bottom of the screen when facing up. Yes im sure any dust flying around will still find a way to stick, but this reduces the chances. Plus, you make sure you are applying in a clean environment anyway. I usually vaccum the house (or area at least) prior to applying, and give the dust time to settle afterwards.
second, and heres the silly part: I make sure the screen is completely wiped, and blow on the screen itself with DRY LIPS as im applying the screen protector face down. This blows off any dust that may settle between the time you apply the screen, and make sure lips are dry as to not blow moisture onto the screen.
There really isn't any fool proof method for applying screen protectors without dust, but without some sort of clean box with a built in HEPA filtration system, this seems to work well for me 80-90% of the time, versus just applying like normal.
unvaluablespace said:
This sounds silly, but whenever I install a cheap screen protector, I do two things: first, i make sure the side that's going to be applied to the screen is FACE DOWN. Never face it up, under any circumstances. if I do, its before removing from packaging. I even remove the adhesive that protects the protector itself, with the screen protector face down. this doesn't give a chance for dust to sit on the bottom of the screen when facing up. Yes im sure any dust flying around will still find a way to stick, but this reduces the chances. Plus, you make sure you are applying in a clean environment anyway. I usually vaccum the house (or area at least) prior to applying, and give the dust time to settle afterwards.
.
Click to expand...
Click to collapse
You can skip all the surgical-precision vacuuming if you do the application in the bathroom. Turn on the shower, hot as it'll go. Leave it run for 5-10 minutes til the bathroom is steamy. That knocks all the dust out of the air.
Then you can apply your screen protector in peace.
Caelrie said:
You can skip all the surgical-precision vacuuming if you do the application in the bathroom. Turn on the shower, hot as it'll go. Leave it run for 5-10 minutes til the bathroom is steamy. That knocks all the dust out of the air.
Then you can apply your screen protector in peace.
Click to expand...
Click to collapse
but wouldn't that cause moisture in the air? I could see that getting in between the screen during application. I bought a ton of screen protectors like OP though, so I'll have to give this idea a shot lol
The moisture will get out over time. Its just like having windows tinted
Sent from my Nexus 5 using Tapatalk
unvaluablespace said:
but wouldn't that cause moisture in the air? I could see that getting in between the screen during application. I bought a ton of screen protectors like OP though, so I'll have to give this idea a shot lol
Click to expand...
Click to collapse
It doesn't matter. Even dry-applied screen protectors go on better this way, and any moisture completely dries out quickly anyway.
Spend a few hundred dollars on a phone and then buy the cheapest cases and screen protectors you can? Doesn't make sense.
I'll pay the extra $8 for a Spigen screen protector and a quality case that match the quality of my Nexus.
Sent from my Nexus 5 using Tapatalk
Spigen could've tried a bit harder and made all the cutouts. Even the temporary screen protector that comes with the phone has those. I think most screen protectors will be similar at the $1+ range but you can't expect much from ones that cost $0.25.
xtremeguards didn't have bubbles for me. Buying 6 of the same screen protectors and then saying all of them have problems doesn't make sense.
I'm assuming the OP means the bubbles are from the edge of the cutouts not sticking down which is a common issue with cheap screen protectors.
the cutouts are not made well so the screen protector itself is warped at the cutouts for the speakers etc so its not flat and does not stick down creating bubbles there.
Just install in steamy bathroom. The steam prevents dust from floating in the air.
Sent from my Nexus 7 using XDA Premium HD app
I got this Nillkin one: http://dx.com/p/277084. I only had one. Applied by using the "hinge" method. Went perfectly. Cutouts are perfect and bubbles are removed very easy (easier than other screen protectors I've had).
I used a little wet cloth to make my screen wet and to remove dust. At first it feels very rubbery, but after using it for a day or even less, it feels just like the glass!
Hello Folks,
I know there are loads of screen protector threads out there but none of them are recent for the MotoX.
I have had an XtremeGuard Protector on my X for a few months, but the gummyness, orange peel and lack of screen sensitivity is killing me.
What are some good current options that are $15 or under ?
Thanks,
Pete
I'm currently using the SUPCASE Screen protector that came with my case: has everything I need to get it on once and only once(even comes with a lint remover film). Looks and feel great. I don't know what you mean by 'gummyness though, the only screen protector I would describe that has a gummy-like feel(especially when I pinch with my fingernail is the Skinomi brands.
pasta1234 said:
Hello Folks,
I know there are loads of screen protector threads out there but none of them are recent for the MotoX.
I have had an XtremeGuard Protector on my X for a few months, but the gummyness, orange peel and lack of screen sensitivity is killing me.
What are some good current options that are $15 or under ?
Thanks,
Pete
Click to expand...
Click to collapse
I am using this: http://www.amazon.com/gp/product/B00EVWX5VO/ref=oh_details_o01_s01_i01?ie=UTF8&psc=1
and like it. If you get it - start applying from the bottom of the phone (near USB connector) because the cutout for microphone is small and more precision is required there than on top.
Thank you for the suggestions folks
What about the glass ones i hear people talking about, what are there advantages ?
Pete
JoeSchmoe007 said:
I am using this: http://www.amazon.com/gp/product/B00EVWX5VO/ref=oh_details_o01_s01_i01?ie=UTF8&psc=1
and like it. If you get it - start applying from the bottom of the phone (near USB connector) because the cutout for microphone is small and more precision is required there than on top.
Click to expand...
Click to collapse
I'll second these. I had the ArmorSuit and it was terrible. These are cheap, durable and don't negatively affect the screen.I've been using one for over 2 months and it still looks fine.
The screen protectors from Motorola are very good.
pasta1234 said:
Thank you for the suggestions folks
What about the glass ones i hear people talking about, what are there advantages ?
Pete
Click to expand...
Click to collapse
I bought a couple of the Mimeusa.com glass screen protectors, one for my wife and another for myself. Installed mine first, its a little different installing such a stiff protector, luckily i was able to lift it back up easily a couple times to adjust the positioning.
The wifes I installed a couple hours after, and it felt like it gave me more problems. didn't want to get positioned right, but eventually I got it lined up well.
The next day it fell off in her car while she was driving and got covered in dirt and dust on the adhesive side.
Mine is still on, after 2 weeks of use;
The texture is awesome! i hate most screen protectors, but this is glass and feels so good to the touch. you hardly notice its there.
It hasn't taken and scratches, and it does feel like fingerprints are less noticeable than on the bare screen.
I don't have a case of my X yet, ordered a bumper from amazon, but its not here yet.
I feel that the protector gathers small fibers easily at the edge. there are a couple of very small fibers that have worked there way just under the edge of the glass. They are hardly noticeable, especially when the screen is on.
I have not seen any new accumulation since the first few days, so maybe its more prone to catching the fibers in the hours / day after installation. I would advise avoiding pockets for 24 hours after installing this product if you can.
I will probably use this screen protector until it chips/breaks/gets too scratched up, and then go naked screen for the rest of the phones life.
If you are intending to spend $15 for a screen protector, might as well get a tempered glass one. I'm using this one: http://www.amazon.com/i-Blason-Motorola-Ultra-Thin-Tempered-Protector/dp/B00E0CUP18/
If you installed it correctly the first time, it should stay stuck and without any bubbles.
pasta1234 said:
Thank you for the suggestions folks
What about the glass ones i hear people talking about, what are there advantages ?
Pete
Click to expand...
Click to collapse
Do you Google?
eksasol said:
If you are intending to spend $15 for a screen protector, might as well get a tempered glass one. I'm using this one: http://www.amazon.com/i-Blason-Motorola-Ultra-Thin-Tempered-Protector/dp/B00E0CUP18/
If you installed it correctly the first time, it should stay stuck and without any bubbles.
Click to expand...
Click to collapse
That's very expansible for me i think...
I appreciate everyone help...
For those who have the glass protectors, do u feel they are worth the extra money compared to a good clear protector like the halo ? Do they cause interference with cases ?
What do u mean expansible sumonmolla ?
Pete
pasta1234 said:
Hello Folks,
I know there are loads of screen protector threads out there but none of them are recent for the MotoX.
I have had an XtremeGuard Protector on my X for a few months, but the gummyness, orange peel and lack of screen sensitivity is killing me.
What are some good current options that are $15 or under ?
Thanks,
Pete
Click to expand...
Click to collapse
I would just like to throw out my support for Liquid Armor. I use it on all of my touchscreen devices, and have never had a scratch on a screen since, and it feels just like glass, without anything on it. The best part is that the one bottle can be used for several screens. Though if you don't use it in a couple months, the stuff will harden in the nozzle of the bottle, making it more difficult to use.
Edit: figured Id throw in a link. http://www.amazon.com/Dynaflo-LIQUID-ARMOR-Universal-Microfiber-DYN-LA100SP/dp/B007EZ3EM0
Wingdom said:
I would just like to throw out my support for Liquid Armor. I use it on all of my touchscreen devices, and have never had a scratch on a screen since, and it feels just like glass, without anything on it. The best part is that the one bottle can be used for several screens. Though if you don't use it in a couple months, the stuff will harden in the nozzle of the bottle, making it more difficult to use.
Edit: figured Id throw in a link. http://www.amazon.com/Dynaflo-LIQUID-ARMOR-Universal-Microfiber-DYN-LA100SP/dp/B007EZ3EM0
Click to expand...
Click to collapse
+1 on this stuff. Been using it on my last 5 phones in the family. Especially great since the wife and I usually are yearly on replacement devices
Sent from my XT1053 using Tapatalk
Disclaimer: I posted this in a couple other threads, but I wanted to try and post it where I know we've been discussing tempered glass screen protectors.
Here's some pictures of the redesigned i-Blason protector. As you can see, there is now a cutout for the proximity sensor. The corners also fit the Moto X perfectly (their old design fit perfectly too). Very happy I finally have a protector that FITS and where the proximity sensor won't be blocked! I liked the i-Blason until I had started having proximity sensor issues because I had dropped it several times, and it never once cracked, unlike the MIME, which cracked the very first time I dropped it.
pasta1234 said:
I appreciate everyone help...
For those who have the glass protectors, do u feel they are worth the extra money compared to a good clear protector like the halo ? Do they cause interference with cases ?
What do u mean expansible sumonmolla ?
Pete
Click to expand...
Click to collapse
i have tempered glass on my moto X ( mimeusa.com/product/moto-x-ghost-glass-screen-protector/ ) since january.
it was very easy to install and the feel is wonderful. my only complaint is that when you drop your phone, it can crack. better a crack on the protector than a scratch on the device, right? my phone has been pretty suicidal lately, what w/ jumping off tables, so it has accumulated many cracks on the protector. i am replacing it (with same ghost glass) and also buying a bumper case ... that may make a difference in the life span of the protector.
this is my first glass protector and yes i like it. on previous devices i used zagg screen protectors and was VERY HAPPY with them, but when i ordered their protector for the moto X, i found that they must have screwed up on the device specs, as the film didn't even cover the entire viewing screen. UNACCEPTABLE! i will not go back to their products.
I had the MIMEUSA and was very happy with the feel of the MIMEUSA, but it didn't fit properly. The corners were too squared and extended over the screen. The edges were also suppose to be beveled to prevent chipping but mine seemed like they were beveled out, leaving a lip on the glass. This all led to the edges chipping and eventually a larger break.
I ordered the i-Blason to try it and am very happy. The fit is perfect, its quite a bit thinner than the MIMEUSA, and it feels just as slick and smooth as the MIMEUSA and the glass screen. I would recommend the i-Blason over the MIMEUSA. And the i-Blason is only $17 on Amazon making it about the same price as the high quality plastic protectors.
James4.0 said:
The screen protectors from Motorola are very good.
Click to expand...
Click to collapse
+1. The Power Support protectors are very good. Their 15% off right now as well, till March 21st.