Now before we say not another some kernel blah blah blah thread, this was my personal use kernel for the past couple of months now, but then had some guy request for it at G+ before and now with the rise of lollipop for d2 on att and verizon sections got a request from @matrixzone to share kernel so now here we are, lets begin
What is this?
so i have flashed most of the kernels from here and there for the d2 but i always got some features lacking but found it on the other, solution, compile own with all the commits i want and get rid of what i dont want , and thus Neocore for D2 was born
A FRIENDLY REMINDER
* Standard disclaimer:
* Your warranty is now void. Use at your own risk.
* In other words: It is your choice to use this kernel,
* I am not responsible for any damage or problems!
WHATS INSIDE
Compiled with Nov 4.9.3 linaro toolchain
faux sound control
interactive governor from bacon
showps mpdecision
showps thermal control
htc async fsync from faux
dynamic readahead from chadgoodman
OC up to 1.8ghz cup and 600mhz gpu (1.5ghz & 320mhz by default)
voltage control
lz4 compressed
f2fs rom support
usb fast charge by imoseyon
and some other stuff i cant recall but can be found on my github
use Kernel tweaker or trickster to modify settings (i use trickster)
how to install
*requirements*
1. must be on AOSP based rom, sorry guys no touchwiz love here Go to 2nd post for some Touchwiz Love
2. custom recovery (twrp,cwm, philz, whatever you prefer)
3. most important, always have a BACK UP
*Steps*
the usual
1. download kernel
2. boot to recovery
3. flash the zip
4. wait for it to finish then reboot
tested by me on the following roms
cm11 m12
spitit rom 1.7
liquid smooth 3.2 milestone
cm12 att
cm12 verizon
kernel has been self tested only but no major issues experienced, feedback would be awesome guys
CHANGELOGS
12-04
net: loopback: set default mtu to 64K
arm: compile with the generic rwsem
cherry-pick: ARM: 7493/1: use generic unaligned.h
cherry-pick: ARM: 7494/1: use generic termios.h
cache_pressure despite the dynamic suspend/resume
fs/dcache.c: adaptive vfs_cache_pressure on suspe
use GCC builtin prefetching
arch: arm: lib: optimize memcpy for cortex-A15
mmc/core: CRC??? disable it,,,
lib/string: use glibc version
lib/memcopy: use glibc version
FSYNC switch
interactive as default GPU gov
uses gzip compression for now
12-06
]Revert "SQUASH: GPU OC/UC" (was causing fps drops and bad rather than better fps)
init: debug: bye bye
asm-generic: rwsem: de-PPCify rwsem.h
asm-generic: rwsem: ensure sem->cnt is only acces
SQUASH: s2w/dt2w for D2 (its finally here, has a few minor issues though but it works, just make sure you activate both at the same time 1st)
12-06-#63
removed interactive gpu gov, that was the culprit for fps drops, enjoy gamers
XDA:DevDB Information
NeOcOrE hYbR!D Kernel, Kernel for the T-Mobile Samsung Galaxy S III
Contributors
thirdzcee, imoseyon, faux123, Synthetic.Nightmare, labodj, jrior1001, neobuddy89, showp1984, gideonx, franciscofranco and many more in case i forget theyre at my github commits
Source Code: https://github.com/thirdzcee/android_kernel_samsung_d2
Kernel Special Features: s2w/dt2w. OC/UC, voltage control, Faux sound, better mpdecision & thermal control, screen off max freq, touch boost & many more
Version Information
Status: Beta
Current Beta Version: 2014-04
Beta Release Date: 2014-12-02
Created 2014-12-02
Last Updated 2015-01-28
NeOcOrE Touchwiz
So i needed a bugless camera back in the holidays so had to flash back to touchwiz and thus NeOcOrE for Touchwiz ROMs was born... same instructions and Disclaimer applies
WHATS INSIDE TW version
LZ4 compressed
faux sound control
bld scheduler
power effecient workques
CPU OC
Voltage control
max screen off CPU freq of 702mhz to save power
f2fs support??? never got it to boot though, keeps changing cache back to ext4
usb fastcharge
asynchronous fsync
dynamic readahead
Links
initial release
neocore-tw-kernel-2015-01-17.zip
Latest release
neocore-tw-kernel-2015-01-29 - trinity colors added, run "trinity" command as superuser via terminal, enjoy
Reserved
mirror link
in case mediafire gives you any trouble
EXTRA STUFF
Quickboot (4.4 AOSP KitKat only for now)
Quickboot.zip
Compatible on most AOSP 4.4 Roms, if compatible you'll see Quickboot option in developer settings. Flash via recovery.
Allows device to power off and power on very quickly
(Note:requires you to press power button twice to turn back on,1st a 2 sec. press then second long press and it will vibrate then turn on )
Dude you're awesome! Thank u for this downloading now!
HaHa first reply thanks again will flash and report back asap!
Edit: I got it! Flashed n setup so far so good I was missing having a good kernel used BMS for along time on kk, this I'm loving!
Tested on 2x i535-D2LTE and 1x T999-D2LTE all CM11 Nightlies,
Perfection!
THANK YOU!
This looks very interesting. Gonna give it a go 2day. Let u know how it goes in a couple days
Thank you for honouring my request. Will test this on my build
In
Any of you guys interested in sweep2wake/doubletap2wake? had it working before in my older builds but it got derped in my latest builds causing lock ups, didn't add it back in afterwards,
Right now I can't get the phone to go to sleep. Been running this kernel since this morning
galahadUSA said:
Right now I can't get the phone to go to sleep. Been running this kernel since this morning
Click to expand...
Click to collapse
Using better battery stats to track wake lock should be helpful to identify if its an app or the kernel preventing phone from sleeping
Are you planning on adding any other governors? thanks again for the kernal.
I personally prefer lean kernel with less features. Adding more option complicates thing and take toll on battery. Battery is more important for most users
Exactly why I'm loving this kernel, simple not overstuffed.I guess it's personal opinion/preference. I've been running it since it was posted w/o any probs!
sjpritch25 said:
Are you planning on adding any other governors? thanks again for the kernal.
Click to expand...
Click to collapse
Not at this time... Interactive gov seems good enough... I will however change the GPU governor soon to be the same as CPU... It will be interactive in my next build
canodroid15 said:
Exactly why I'm loving this kernel, simple not overstuffed.I guess it's personal opinion/preference. I've been running it since it was posted w/o any probs!
Click to expand...
Click to collapse
I like it close to stock... More on upstream patches and code improvements over advanced and extra features... I did add s2w/dt2w before because my home button is getting hard to press and I want to prolong it's life as well as the power button
Wouldn't mind s2w/dt2w as my home button like, everyones on L builds is still broke. Also, correct me if I'm wrong but I believe U brought us the first OC kernel (separate from ROM) for 5.0 L builds! Either way, RESPECT! :thumbup:
canodroid15 said:
Wouldn't mind s2w/dt2w as my home button like, everyones on L builds is still broke. Also, correct me if I'm wrong but I believe U brought us the first OC kernel (separate from ROM) for 5.0 L builds! Either way, RESPECT! [emoji106]
Click to expand...
Click to collapse
Thanks... Be warned though 1.8 gets unstable sometimes, if you do want oc 1.7 is my max tested stable for nom bin CPU's, there's 3 types for our phone, slow, nom and fast, each has its own voltage specifics.. And s2w/dt2w consumes more power since it keeps touch panel powered on, so unless your on a 7k mah battery like me , your gonna have battery troubles with it... [emoji12]
Is it just one zip for KK and LP?
Edit: NVM I figured it out. One comment though, I think this is the only recently compiled kernel that gets data with my current ROM... That's awesome!
GS³: Carbonized, leanKernel'd, Philz'd
Gimme Chocolate!!
new build 12-04 up, changelogs in OP
mp3deviant721 said:
Is it just one zip for KK and LP?
Edit: NVM I figured it out. One comment though, I think this is the only recently compiled kernel that gets data with my current ROM... That's awesome!
GS³: Carbonized, leanKernel'd, Philz'd
Gimme Chocolate!!
Click to expand...
Click to collapse
Glad its working great on you... Gonna try to make improvements on this as time goes on
Related
Presenting, my HD2 NAND Android kernel!
Summary
To provide, stable, fast and up to date kernels for our HD2s running either DFT or CWM nand android
Features
- 1190, 1190 Undervolt auto scaling versions available. listed is kernel MAX speed, it will scale to anything less depending on demand and ROM installed. Default max seepd is 998 without the use of an overclocking app
- Faster IO tweak taken from hastarins kernel tree
- Latest YAFFS driver
- Always built from latest source tree
- Very responsive kernel configuration
- Battery efficient
- Supports EXT 2 / 3 / 4, depending our your chosen ROM
- RMNET / PPP both supported, depending on your chosen ROM
- Bluetooth, WiFi, LED notifications all working correctly
- Smartass (default), Interactive and all standard CPU governors supported
- CIFS supported
- MAX defualt speed is 998, use setCPU or similar to overclock if you so wish
- cLK supported
- Automatic Extended Battery Support
Choosing your kernel
1190Mhz
This should work perfectly on nearly every HD2. It offers good speed at a slight cost to battery life. It will, depending on how your chosen ROM implements it, scale anywhere between 245-1190 Mhz depending on load
1190Mhz Undervolt
Same performance as 1190Mhz above, but with lower CPU voltage settings. It will work perfectly on most phones, but not all. If you experience FCs or random reboots then chose one of the aforementioned versions. This kernel offers significant battery life improvements if it works for you.
About the source and GPL compliance
The kernel is built direct from main GIT. You can access the commit logs and sources here on gitorious
The changes and modifications as mentioned in the changelog, and my build .config are all in my separate patch file, which you can download here
Download
All the kernels are supplied on one zip package. Contained within the package are the 2 kernel zImages and the associated modules. Chefs and advanced users will know what to do with these.
Download v11 (files only) --> http://htcfanboys.com/CleanEx/Kernel/DISTRIBUTION KERNELv11.zip
Download CWM ZIPs FOR NON TYPHOON ROMS (*series A*)
http://forum.xda-developers.com/showpost.php?p=11968195&postcount=408
Download CWM ZIPs FOR TYPHOON ROMS / ROMS SHIPPED WITH TYTUNG v6 (*series B*)
these include the wpa_supplicant fix for Wifi / bootlooping
http://forum.xda-developers.com/showpost.php?p=11974837&postcount=471
(the RAM named ones are for typhoon ram build)
Flash under cwm.
Wipe Cache and Dalvik Cache.
~~~~IMPORTANT~~~~
If you are not sure you need the WiFi patch, flash the *series A* kernel. If you find your phone bootlooping / wifi crashing, flash the *series B* kernels
As a backup, the wifi patch remains attached to this post
Changelogs
v11
- Pulled new updates from GIT
- Automatic Extended Battery support
- cLK patches and support built in
- some cleanups
- config changes, more responsive (quadrant wont improve thats IO bound)
v10
- Bug fixes, WiFi should work for everyone without the patch
- Imported the i2c, gsensor, GPU decoupling driver patches to new build tree
- Removed all debugging from kernel (99.9% people dont need it)
- Some build config changes, little more responsive
v9
- Fixed WiFi driver for non GB builds
- Fixed default CPU speed @ 998 max
- Fixed crashes / bootloops / random reboots
v8
- Switch to main branch, import speed mods from previous version
- Fix WiFi for GB / non-GB builds
- config changes for better response times
v7
- Switched to tytungs branch
- Swapped tytungs GB only WiFi driver for main one from primary GIT
- Added CIFS support
- Removed 998 / 1536 speeds
- 1190 Normal is not undervolted and will work for everyone
- 1190 uv is undervolted and might not work for everyone
- Reverted to SLAB, should fix bootlooping
- Other minor config changes
v6
-First public release
Disclaimer
I am not responsible for any damage, loss of data or earnings resulting from the use of my kernels. Users who wish to use an overclock kernel do so on the understanding that running any device outside its normal operating parameters may have damaging consequences
Credits:
Cotulla, Bepe, Hastarin, Tytung, Rafpigna, Markinus and all other kernel source contributors as mentioned on the GIT Commit logs.
Fadzy, JoPlayer, Dave and Jan-Willem for their never ending support, friendship, help and good laughs.
First! This is in a kleandroid 2.55?
yes....and no
its just been recompiled, and i added pure 998mhz for people who have phones that cant take the faster speeds!
Awesome! This is the best kernel, have been using it for like three days and it gives me the best battery life and performance. I loved it. I'll pack this one into cwm zip when I get home and flash it.
Edit: how much does battery life actually improve with the uv one? Now I'm torn between the uv and oc to 1.5ghz. Battery or performance?
Sent from my HD2 running Android on NAND
Can anyone test this on sergio's coredroid 1.4 and post results? I would but dont have my computer for a couple days.
g.lewarne
Please add 998Mhz kernel to next update CleanDroid!
Derek0228 said:
Awesome! This is the best kernel, have been using it for like three days and it gives me the best battery life and performance. I loved it. I'll pack this one into cwm zip when I get home and flash it.
Edit: how much does battery life actually improve with the uv one? Now I'm torn between the uv and oc to 1.5ghz. Battery or performance?
Sent from my HD2 running Android on NAND
Click to expand...
Click to collapse
you might get maybe possible 15% more battery time out of the UV kernel. in ideal circumstances in a perfect world of course
CWM
How to use that? :-(
Any zip to use on cwr?
felipemadox said:
How to use that? :-(
Any zip to use on cwr?
Click to expand...
Click to collapse
Not yet, it is still underway.
I made some cwm zips, before going to sleep. I wasn't able to test them because it's late, but they should work. If g.lewarne wants to post them in the OP, i have no problem. Inside the zip, after you download, there are 4 more zips, one for 998, 1190, 1536(this one doesn't work for me) and 1190 UV. Just flash the one you like and enjoy!
http://www.multiupload.com/DPR3F7TW7J
http://www.mediafire.com/?sqg55hze9evgchb
If you find this useful donate me a click on my thanks button.
Thanks derek.
g.lewarne said:
Thanks derek.
Click to expand...
Click to collapse
Once tested, please update, i will test a rom on it.
raviluke said:
Once tested, please update, i will test a rom on it.
Click to expand...
Click to collapse
I can't test anything now as im off to bed . Its 2am and I did a 14 hour day. Yawn!
report
Derek0228 said:
I made some cwm zips, before going to sleep. I wasn't able to test them because it's late, but they should work. If g.lewarne wants to post them in the OP, i have no problem. Inside the zip, after you download, there are 4 more zips, one for 998, 1190, 1536 and 1190 UV. Just flash the one you like and enjoy!
Please give feedback, again I say, they should work but haven't tested them. I've made all his previous kernel versions cwm zip, and flashed them successfully.
http://www.multiupload.com/DPR3F7TW7J
http://www.mediafire.com/?sqg55hze9evgchb
Click to expand...
Click to collapse
Thank you!
1190Mhz Undervolt its working here.
1536 does not work for ne! Causes random reboot on boot. If you want to test it, do so, but i'm pretty sure it's a problem with the kernel, not with the zip, because the one g.lewarne uses on his rom had 1536 and caused random reboots too, cant be a coincidence . Also, youre welcome!
I flashed the 1190 to test, now off to flash the UV one!
Sent from my HD2 running Android on NAND
raviluke said:
Once tested, please update, i will test a rom on it.
Click to expand...
Click to collapse
It works, but not the 1536 one, or at least not for me.
Sent from my HD2 running Android on NAND
Might I just point out that in real world situations the 1190 kernels are just as fast. 1536 is really just a gimmick but some people want it so there you to. Myself, I run my own personal 1305
Sorry for spamming this thread, but I must ask, is uv dangerous? If so, what are some steps I have to follow to prevent my phone from getting fu'd? Like for example,i know that for the 1536, we shouldn't have it always o/c'd to the 1.5ghz.
Sent from my HD2 running Android on NAND
Derek0228 said:
Sorry for spamming this thread, but I must ask, is uv dangerous? If so, what are some steps I have to follow to prevent my phone from getting fu'd? Like for example,i know that for the 1536, we shouldn't have it always o/c'd to the 1.5ghz.
Sent from my HD2 running Android on NAND
Click to expand...
Click to collapse
Uv Isn't dangerous in the same way, the only problem is possible crash, cpu is safe
Derek0228 said:
I made some cwm zips, before going to sleep. I wasn't able to test them because it's late, but they should work. If g.lewarne wants to post them in the OP, i have no problem. Inside the zip, after you download, there are 4 more zips, one for 998, 1190, 1536(this one doesn't work for me) and 1190 UV. Just flash the one you like and enjoy!
http://www.multiupload.com/DPR3F7TW7J
http://www.mediafire.com/?sqg55hze9evgchb
If you find this useful donate me a click on my thanks button.
Click to expand...
Click to collapse
Installed the UV Kernel on Coredroid v1.4 TMOUS ver its getting stuck at GO GO GO
*WARNING! I Am Not Responsible For Anything That Happens To Your Device*
:: DARKSIDE.VENOM ::
..A DARKSIDE DEVELOPMENT..
** PLEASE READ ENTIRE OP THOROUGHLY BEFORE ASKING ANY QUESTIONS OR REPORTING ANY BUGS **
!!! ATTENTION !!!
SUPPORTED ROMS:
CM10 > ALPHA 3
CM9 > NIGHTLY 20120723
AOKP JB > August 12 | ALPHA
AOKP ICS > July 15 | Milestone 6
AND NEWER! UNTIL OTHERWISE NOTED...
BIG THANKS TO:
Team Chopsticks, Steve Kondik and entire CM Team, Kernel.org, Code Aurora, Faux123, romanbb, show-p1984
Based off and compiled from Samsung kernel source code.
My github found HERE
Included:
Kernel version ICS=3.0.8 || JB=3.0.40
Compiled with Linaro 4.6.2 toolchain
XZ kernel compression
ondemand default CPU governor (See 2nd Post for more info)
Default Freq = 1.35GHz/384Mhz
NOOP I/O scheduler default
SLUB Memory Management
Overclock'd CPU up to 1.83GHz
Overclock'd 3D GPU @ 320Mhz
Overclock'd 2D GPU @ 266.667Mhz
Boosted L2
Increased bus frequency
6 Stages 3D GPU scaling, variable io_fraction
3 Stages 2D GPU scaling, io_fraction 100
CRC optimization's
RWSEM optimization's+
Automatic process group scheduling
bootanimation.zip support for /system/media
DVFS
ZRAM
ZCACHE
OTG
MHL
BLN
NTFS
CIFS
UTF-8
Available CPU Governors:
conservative, performance, interactive, ondemand, powersave, userspace, badass
Optional I/O Schedulers:
deadline, cfq, noop, sio
Instructions on flashing Kernel:
1. Download and place on your SD card
2. Boot into Recovery Mode
3. Do a NAND backup if desired
4. Flash DARKSIDE.VENOM
5. After flashing is complete, Reboot..
6.Wait 5 minutes for OS to load and reboot again
7.Done!
Welcome to the DARKSIDE!
Click to expand...
Click to collapse
My Change Log:
Code:
[FONT="Trebuchet MS"]
[B]DARKSIDE.VENOM 07 CM10 [8.18.2012] [#3][/B]
[COLOR="Red"][B]### ALPHA ###[/B][/COLOR]
* Inline with more changes from TC & CM
* Add vdd control and fixup acpuclock-8x60.c
* Optimize SLUB
* Tweak deadline for better performance
[B]DARKSIDE.VENOM 06 CM9/AOKP [8.14.2012] [#2][/B]
* Global VDD control enabled
* Other minor fixups
[B]DARKSIDE.VENOM ALPHA 07 CM10/AOKP-jb [8.14.2012] [#2][/B]
[COLOR="Red"][B]### ALPHA ###[/B][/COLOR]
* Inline with more changes from TC & CM
* Implemented more patches from previous versions
[B]DARKSIDE.VENOM ALPHA 07 CM10/AOKP-jb [8.13.2012] [#1][/B]
[COLOR="Red"][B]### ALPHA ###[/B][/COLOR]
* Inline with CM and TeamChopstick's kernel source.
* Kernel bump to 3.0.40
* Implemented most previous kernel patches
* CPU/GPU OC implemented
* Badass governor
* Tooo many things to list...
[/FONT]
** PLEASE respect my work and ask before posting mirrors **
>>> DOWNLOAD <<<
PLEASE NOTE: AROMA has come and gone. It was giving to much trouble with different recoveries. Back to the "old school" method of flashing. Also... Camera on CM10 is working for me but flickers green occaionally. If it doesnt work for you, please dont ***** about it. Its a known bug and is being worked on by the best. So basically expect the same issues that you been having...
[CM9]
..DARKSIDE.VENOM 06..BUILD: [ #2 ]
[DISCONTINUED]
[8.14.2012]
md5: 3baaf02a2313ba4ead96cbb10b250854
[CM10]
..DARKSIDE.VENOM ALPHA07..BUILD: [ #3 ]
[DISCONTINUED]
[8.18.2012]
md5: 02410a138b58f4f32f793a21d89b6e36
[AOKP]
..DARKSIDE.VENOM 06..BUILD: [ #2 ]
[DISCONTINUED]
[8.14.2012]
md5: 28923c3a68aa09ff736eefeaf9b0356c
[AOKP-jb]
..DARKSIDE.VENOM ALPHA07..BUILD: [ #2 ]
[DISCONTINUED]
[8.14.2012]
md5: e1b993fa3169f9f98a47145294c08987
you underestimate the power of the DARKSIDE
Fire powahhhhh!
[READ HERE][REF][TWEAKS] Kernel Governors, Modules, I/O Schedulers, CPU Tweaks, AIO App Configs
What is badass? Thanks to @show-p1984
Well good question. With ICS I (@show-p1984) decided to rework my gb badass which never got released because it was always pushed aside. To break down what it is:
Badass removes all of this "fast peaking" to the max frequency. On a typical system the cpu won't go above 918Mhz and therefore stay cool and will use less power. To trigger a frequency increase, the system must run a bit @ 918Mhz with high load, then the frequency is bumped to 1188Mhz. If that is still not enough the governor gives you full throttle. (this transition should not take longer than 2-5 seconds, depending on the load your system is experiencing)
Badass will also take the gpu load into consideration. If the gpu is moderately busy it will bypass the above check and clock the cpu with 1188Mhz. If the gpu is crushed under load, badass will lift the restrictions to the cpu.
Please remember: Due to it's nature, this is not a benchmark governor. It is meant as a governor that gives you a smooth experience while saving battery, lots of it
maybe???????
Ok well give me a few and let me fire this bad boy up and lets see what happens....
playya said:
Ok well give me a few and let me fire this bad boy up and lets see what happens....
Click to expand...
Click to collapse
You will flash to your phone, then you will reboot, and then you say thanks
and before it get mentioned, Yes i still need to add OC/UV but no worries because CM9 nighly doesnt have and it CM9 nighly also has dvfs enabled, which doesnt allow user to manually configure frequencies.
either way battery life is def on par and it def seems nice and fast... let me know
going to test this bad boy..been waiting for this Thank you so much!
Would it matter which build of CM im on. I update to the newest nightly pretty often, so im assuming I flash a nightly then this after?
Also, anyone find any bugs?
Rekzer said:
Would it matter which build of CM im on. I update to the newest nightly pretty often, so im assuming I flash a nightly then this after?
Also, anyone find any bugs?
Click to expand...
Click to collapse
:: NOTICE ::
>>> SUPPORTED ROMS <<<
CM9 NIGHTLY > 20120715 / AOKP???
Currently I have only tested CM9 NIGHTLY 20120715. I cant confirm for AOKP, but I am assuming all things should work? maybe? Please report back to me on this...
so it says you need to be on Nightly 20120715 or newer... And I am not so sure about AOKP. I havent tested it yet on that rom
thederekjay said:
:: NOTICE ::
>>> SUPPORTED ROMS <<<
CM9 NIGHTLY > 20120715 / AOKP???
Currently I have only tested CM9 NIGHTLY 20120715. I cant confirm for AOKP, but I am assuming all things should work? maybe? Please report back to me on this...
so it says you need to be on Nightly 20120715 or newer... And I am not so sure about AOKP. I havent tested it yet on that rom
Click to expand...
Click to collapse
Oh wow, sorry for the derp. Will put it on my CM now I love CM but always missed your work, so this is heaven!
Nice bro.. thanks
Sent from my SGH-T989 using Tapatalk 2
Download now and will test with cm9 nightly 7/6/2012. Will see how it run
Sent from my SAMSUNG-SGH-T989 using xda premium
wait will this work with darkside rom v8? im just asking because its obviously touchwiz..
jsnoop said:
wait will this work with darkside rom v8? im just asking because its obviously touchwiz..
Click to expand...
Click to collapse
No. This is for cm9. Venom 03 is for touchwiz, I think.
liemadamous said:
Download now and will test with cm9 nightly 7/6/2012. Will see how it run
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
You must use nightly 07/15 or newer. I have just said that and its in the op.
jsnoop said:
wait will this work with darkside rom v8? im just asking because its obviously touchwiz..
Click to expand...
Click to collapse
I have it written everywhere that its cm9 or aokp. I don't know what else I can say to get it across... its even in the title of the thread. It the entire reason I created a separate thread
Ill try it out on AOKP..thanks!
Tested on aokp and rotation is not working correctly.
Rod3 said:
Tested on aokp and rotation is not working correctly.
Click to expand...
Click to collapse
OK thanks. It has to do with kernel configuration file. Should be an easy fix.
thederekjay said:
OK thanks. It has to do with kernel configuration file. Should be an easy fix.
Click to expand...
Click to collapse
love your work bro, but I've been on aokp lately. glad to see a aokp/cm9 kernel, gonna wait for an auto rotation fix and then flash asap!!
Hercules was here
just flashed this bad boy..using badass governor and will report back the battery life after a few days. Thank you so much!
Working nicely on 7-15 of CM. Seeing a definite speed improvement! I feel like ive upgraded phones lol.
Hey Everyone,
I'm by no means a pro at kernel building but I've put lots of effort into these kernels so I thought I'd share them with you. The Uber kernel will always be updated to the latest Kernel version and will be overclocked to 1890 MHz or 1998 GHz (2 GHz) you decide which option you are willing to do. Unlike some of the other T-mobile Galaxy S II Hercules developers out there, I actually have a Galaxy S II and plan on having it until Summer 2014. This means that EVERY KERNEL I POST HAS BEEN TESTED AND IS WORKING although it might not be perfect (few things in life ever are).
Even though I don't post anything unless it works I still don't want to be liable for user errors. In other words, if you flash one of these Kernels your warranty is void and I AM NOT RESPONSIBLE for any data loss or bricked devices etc. A Clean install is ALWAYS recommended. That does not necessarily mean you can't install these kernels on you current build it just means that you might have problems if you do. Recently apps have been getting corrupted for whatever reason whether on Stock or AOSP and in most cases they cause RRs and SODs. If you find yourself in one of those situations a clean install is the easiest fix. If you want to try and save you apps then connect to you phone while in recovery using adb. Then type adb shell. Now once you are in that shell you can run this command to fix your apps "e2fsck -yfDC0 /dev/block/mmcblk0p25" it could take anywhere from a few minutes to an hour depending on the state of your apps.
[AOSP 4.4.x UBER KERNEL LINK]
UBER 4.1 - 1.89 GHz RELEASE for AOSP 4.4 KitKat
UBER 4.1 - 2 GHz RELEASE for AOSP 4.4 KitKat
All old Kernels can be found on Dev Host via this link (be careful you read file names and descriptions carefully if you choose to take a peek around) http://d-h.st/users/Cl3Kener/
Installation Instructions
**** IMPORTANT!!! USE TWRP 2.6.1.0+ for 4.4 kernels!!! Failure to do so may result in bootloops due to changes made to TWRP to accommodate SELinux in 4.4 ROMs (Links include flashable TWRP installation zips credits to meekrawb. Just flash them in your current recovery! ) ****
1. For best results a install these kernel after a fresh ROM install (although it still should work if you don't do that)
2. Reboot into recovery (MAKE SURE YOU USE THE RIGHT ONE!!! (See red print above))
3. Flash Kernel Zip
4. Reboot and let Settle for ~10 minutes
5. Install Trickster MOD from the App Store for access to all of the options.
6. Change the settings to something other than INTERACTIVE (Especially if you run it with BFQ it will give you the worst screen lag ever). Then enable "Set at Boot" and push the check mark button at the top right hand portion of the screen or else you will lose your configurations.
7. Enjoy!!!
Error Reporting
I am always open to hearing about your errors although just telling me something went wrong without giving me details does me absolutely no good. So here are my expectations if you do want to complain about something not working:
1. Please list the ROM you are using,
2. The IO scheduler you were using
3. The CPU governor you were using
4. The CPU frequency range (192/1080 etc)
5. What you have done to attempt to fix it.
6. If you were able to simulate it again using the same settings.
7. Anything else you think is applicable to the issue
I would also hope that you would consider trying some of the following things to fix your issue before you ever report it because most of these things will fix the problem without me even having to change a thing.
1) Fix file permissions using a program that does a thorough job. I recommend using the fix file permissions in ROM manager because it is the best I’ve seen. For the record, I don’t actually use ROM manager for anything other than fixing permissions. Please consider trying this first because it tends to fix most of the FC/RR/SOD errors you might have.
2) Make a backup and install a clean version of the ROM you are running and see if you are still experiencing those same errors. You may have corrupted files if you’ve been dirty flashing.
3) If that doesn’t solve it, redownload and reflash, maybe something got corrupted but it still managed to flash. This happens sometimes and I can cause you grief.
4) For advanced users pull a logcat. I know not everyone knows how to do this but you can learn if you check out this OP or other ones like it
SPECIAL THANKS TO:
Android88 - because he is awesome and encouraged me to create this thread!
Samsung - for the source code to build these Kernel (and for making the phone)
Ayysir - for his wonderful tutorial on making a bash script to build kernels and for helping me out all of the time with everything!
Elbermu - For Bringing Thermal and Sweep2Wake to Hercules and for the help!
Bmg002 - For his extensive work fixing/rewriting my init.d scripts
Gruntparty - For completely redoing/fixing the build.prop injector I use for my AOSP Kernels
I Am The Frost - For being my first and best tester on xda. He's debugged several issues in these kernels for me
UBER Kernel Repositories can be found at https://github.com/Cl3Kener/HERC-KERNELS and are properly labeled for your convenience (see the branches)
Informational Links
Here is a fantastic guide on "Innards" of Kernels
Optimizing Linaro Keychains
Building a Bash Script to make Kernels
JOIN MY GOOGLE COMMUNITY IF YOU WANT INSTANT UPDATES ON ANY OF ANDROID STUFF I DO.
Reserved!
XDA:DevDB Information
[KERNEL][AOSP 4.4.x][2GHz/1.89 GHz] UBER 4.1 | LINARO 4.7.4, a Kernel for the T-Mobile Samsung Galaxy S II
Contributors
Cl3Kener
Kernel Special Features:
Version Information
Status: Beta
Created 2013-12-02
Last Updated 2014-01-30
Changelogs
Changelogs
Changelog UBER 4.1 Release
- ONLY FOR ANDROID 4.4.2 CM 12/16 Nightlies and beyond!!!!
- Kernel Version 3.0.101 - Linaro 4.7.4 2013.12
- USB fastcharge
- MORE TCP Options "Veno as default
- Fsync toggle - disable for better performance but beware that if your phone crashes you will lose data.
- Overclocked CPU 1890 or 2GHz/ GPU 3D = 320 2D = 266
- IO Schedulers - cfq, bfq, row, noop, deadline, sio, vr, FIFO, and zen
- CPU Governors - intellidemand, interactivex, lazy, wheatley, smartass, badass, lionheart, minmax, fantasy, savagedzen, scary, HYPER and samsung.
- Frandom Lag Reducer
- Smaller sized kernel due to xz compression.
- CPU link - elbermu
- Sweep2wake - thanks dennis rassmann (@show-p1984) for his awesome code and elbermu for modifying it to fit this device!
- Thermal - thanks once again to dennis rassmann (@show-p1984) for his awesome code and elbermu for modifying it to fit this device!
- IO Booster
- CPU Power - Vincent Guittot
- Frontswap Support
- Google "Snappy" compression/decompression
- KGSL GPU Control - carvsdriver
Additional Info
Terminal commands to enable/change a kernel features if you are don't like kernel tuning apps
Fsync
To enable - echo 1 > /sys/module/sync/parameters/fsync_enabled
To disable - echo 0 > /sys/module/sync/parameters/fsync_enabled
USB Fast Charge
To enable - echo 1 > /sys/kernel/fast_charge/force_fast_charge
To disable - echo 0 > /sys/kernel/fast_charge/force_fast_charge
Set Thermal Values
Go to /sys/kernel/msm_thermal/conf/ in a root file browser and change the values
Set MPDecision Values
Go to /sys/kernel/msm_mpdecision/conf/ in root file browser and change the values
Disable CPU Link
echo 0 > /sys/kernel/cpu_gov_sync/force_cpu_gov_sync
Recommended CPU Govs by Category
For Performance
Performance Governor - Full OC
HYPER - full oc
Lionheart - full oc
For good battery life with decent performance use
Intellidemand
Interactivex
Ondemand
Samsung
Lazy
Moderately Conservative
Badass
Conservative
Wheatley (debatable could be in the above category)
Very Conservative
Powersave
SavageZen
not sufficient info? checkout out this op
Sweet! New kernel!
Sent from my SGH-M919 using Tapatalk
Sweet! Will try this out right now :good:
Flashed beautifully thanks @CI3kener
Sent from my SAMSUNG-SGH-T989 using Tapatalk
gotta love the uber, thank you kener
Sent from my SAMSUNG-SGH-T989
Thank You !
Will this work on alpha 3??
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
JNMM said:
Will this work on alpha 3??
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Yes ?
Sent from my SAMSUNG-SGH-T989 using Tapatalk
3 New Performance Boosters
Hey Everyone,
For those of you who haven't heard I've been using "Koding" as my new kernel build server. Space is very limited with my free account but if you'd like you can click here and signup to help me get more free space. You'll also find that you can learn how to code just about anything (java, html5, php, to name a few). Many developers and adding tutorials and sharing their projects so if you are interested in that stuff make sure to sign up!
I've made two nightlies this morning which need testing. For those of you who were around for my 4.3 you might recall that somewhere along the line there was suddenly a curious SD Card Mounting/Unmounting that would happen after unlocking the phone. I had made so many commits in such a short time frame that I was unsure which one caused the error. I've gone back and added my top three performance improving commits from the questionable series to see if any of these three commits caused the error (I certainly hope they did not, I really hope it was caused by the LZ4 compression and not the performance boosters). Let me know if you see any problems as you use these nightly kernels!!! Remember these are for 4.4 ONLY!!!
Here are the links!
UBER 1.89 GHz
UBER 2 GHz
Cheers!
Cl3Kener
just to let you know i have not been getting the sd card error on the 4.4 uber
Signed up on Koding maybe you can teach me a thing of two (^o^)
Sent from my SAMSUNG-SGH-T989 using Tapatalk
Confirmed working on almites cm build
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
BETA2 For 12/16 CM Nightlies and Beyond
Hey Everyone!
Well Team Chopsticks finally got video working although from what I can tell all of the work was actually all done by our very own @bryan2894 who went and found the patches that fixed the video!!! Great work @bryan2894!!! Part of this video fix included the kernel so here is an updated kernel with the patch needed. This kernel will only have fixed video on CM 12/16 nightlies and beyond. I bet it might work with earlier but you might as well update if you are a CM user so what's the point?
Anyhow, enjoy the updates!
Cheers!
Cl3Kener
PS since I know someone will ask, This actually does work great with the 12-14 HellKat build since it also has working video because we grabbed the patches from CM before they were merged.
Sent from my SAMSUNG-SGH-T989
Question: for official CM 11 update, i am currently using recovery CWM 6.0.3.7, because CM officialssaid so or phone will run into problems. but this kernel requires TWRP, i am wondering can i update CM 11 nighlies with the given TWRP recovery?
Please advise. Thanks.
syan8182 said:
Question: for official CM 11 update, i am currently using recovery CWM 6.0.3.7, because CM officialssaid so or phone will run into problems. but this kernel requires TWRP, i am wondering can i update CM 11 nighlies with the given TWRP recovery?
Please advise. Thanks.
Click to expand...
Click to collapse
That stuff is nonsense. The latest TWRP in fact is much better for this phone and flashing this or any other ROM here IMHO. I tested both CWM and TWRP on more than one occasion and results were identical. For me TWRP is also much easier to get into when you have an issue with a new ROM booting and you need to get into recovery via the power & volume up buttons.
syan8182 said:
Question: for official CM 11 update, i am currently using recovery CWM 6.0.3.7, because CM officialssaid so or phone will run into problems. but this kernel requires TWRP, i am wondering can i update CM 11 nighlies with the given TWRP recovery?
Please advise. Thanks.
Click to expand...
Click to collapse
I've flashed CM11 (my builds) about 10 times in the last month and have been using TWRP 2.6.1.0 since Sept. without issue.
Just don't try to flash TWRP from within GooManager, either flash from recovery or use Odin (best).
Since the video recording is working now I moved to CM11 using the @Almite (Rom) and @Cl3Kener (Uber 2GHz kernel) and I can tel you this is solid Rock combination in performance and stability even those are still in Nightlies/Beta so thank you all for this amazing team work...
Is it possible to add the BLN notification (I know some don't like it but usually this the feature can be disabled)
Thanks
AOSP RIN Kernel for D851
Close to stock with some sugar added ... delicous!
Hey guys and girls,
here is my attempt to build up on the cm source for an modified AOSP kernel, hope you like it, have fun
First of, DISCLAIMER, I'm not responsible for bricked devices, dead unicorns, rainbows with missing colors, world war, nose bleed, void warranty (you know that already, don't you? your warranty is void now and it's your fault ) or any other harm happening to your device, you or people around you!
What does it serve? (Features)
AnyKernel
Kexec Hardboot patch
FauxSound support
OC to 2.7GHz and UC support
Voltage control
Intelliplug
Cpu limiter
GPU Overclocking to 675Mhz
Simple GPU Algorithm
Simple_ondemand GPU Governor fixed
fsync on/off support (on by default)
Power efficient workqueues
Dynamic management of dirty page writebacks
Dynamic Read Ahead
IO Schedulers
CFQ
DEADLINE
FIFO
FIOPS
NOOP
ROW (default)
SIO
TRIPNDROID
VR
ZEN
Governors
Adaptive
Conservative
DanceDance
Intelliminmax
Interactive (default)
Lagfree
Lionheart
OnDemand
Performance
Powersave
SmartassV2
Userspace
Wheatley
Smartmax
TCP Congestion Algorithms
BIC
Westwood+
Vegas
Veno
Yeah
HTCP
Cubic (default)
Reno
LiveSharpening
2-Way Call Recording support
exFat support
DriveDroid support
KSM
android logger sysfs toggle (disabled by default)
Many under the hood fixes
Stability
More to come
How to apply it? (Installation)
IMPORTANT: Read through all the requirements, steps and warnings before you do anything, if any requirement doesn't match or you don't know what one or more of the steps below mean or do, ask before you do any of them, if you don't know how all the steps can be done, let it be, I warned you, if you don't do and something bad happens, I'll just laugh at you!!
Requirements? Yes!
D851
Custom Recovery
AOSP based lollipop ROM (Mainly cm12 based)
How to flash the kernel?
BEWARE to be on the default kernel of the given ROM (NO custom, except at updates of this one!!) when flashing this kernel, the ramdisk is taken from the currently flashed kernel!!!
Download zip
Place on internal or external SD
Reboot to recovery
Choose install zip
Search for the downloaded zip
Confirm flashing
Wipe cache
Reboot
Have fun
Changes? (Changelog)
14.01.2015/1.6.5
FauxSound support added
Dynamic read ahead
13.01.2015/1.6
Initial AOSP release
Full list of commits can be found here
Where to get it from? (Download)
google drive | AndroidFileHost | dev host
Let me test!! (Beta Testing Community)
Google+ LG G3 Beta Testing Community
Show me the so(u)rce(ry)! (Source Code)
https://github.com/tectas/android_kernel_lge_msm8974ac/tree/rin-cm-12.0
Donators (huge thanks, you're simply great )
@Toneman07
@Helloworld294
@shaarky
@Dreamxtreme
@guyd
@mosincredible
@tobitege
@AndroidUzer
Credits
XDA for the great community
Google for their great operating system
LG for the great device
CyanogenMod for the base this is built up from
@invisiblek for his marvelous job on the bring up of the device and the many patches
@HolyAngel for some commits I used
@faux123 for his great work with intelli* and beyond
@KAsp3rd for some commits I used
@myfluxi for some commits I used
@trialsrider1 for some commits I used
@Skin1980 for his breakthroughs at our device, his support and for being such a nice guy
@Lord Boeffla for some commits I used
@GuneetAtwal for some commits I used
@DooMLoRD for some commits I used
@Fechinator for some commits I used
@savoca for AnyKernel, Livesharpening and some other stuff
@Christopher83 for his implementation of Dynamic management of dirty page writebacks and some additional stuff
If you like my work, please show your appreciation by pressing the thanks button, if you want to do more, i've nothing against a little donation, but I'm as happy when you just thank me by pressing the button
XDA:DevDB Information
Rin Kernel AOSP, Kernel for the T-Mobile LG G3
Contributors
Tectas
Source Code: https://github.com/tectas/android_kernel_lge_msm8974ac/tree/rin-cm-12.0
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: 1.6.5
Beta Release Date: 2015-01-14
Created 2015-01-14
Last Updated 2015-01-14
Reserved
Awesome thanks. Heard good things about your STK LG kernel. Downloading
razrlover said:
Awesome thanks. Heard good things about your STK LG kernel. Downloading
Click to expand...
Click to collapse
Super addition to the D851 arsenal.
Thanks
P.S: Can't seem to find it in the downloads!
arifqur said:
Super addition to the D851 arsenal.
Thanks
P.S: Can't seem to find it in the downloads!
Click to expand...
Click to collapse
Sorry, link fixed.
Tectas said:
Sorry, link fixed.
Click to expand...
Click to collapse
Thanks for the link and especially thanks for being the first Dev to include kexec hard boot patch for D851 in his kernel
Heh, I managed to screw up my MultiROM setup.
Fusion LP was a tertiary ROM. I decided to flash this kernel against it. Almost 10 minutes and it never finished flashing. TWRP was also frozen.
On restart none of the ROMs would boot. Trying to reselect Fusion in MultiROM would fail and freeze/lock TWRP. Seems the partition with Fusion got corrupted.
Got tired of pulling the battery so wound up restoring primary ROM and will start over with MultiROM.
Just one of those things probably unrelated to the kernel itself.
I should have at least backed up the secondary ROM. Oh well. ?
Small update to 1.6.5:
14.01.2015/1.6.5
FauxSound support added
Dynamic read ahead
Download within the OP, have fun
Tectas said:
Small update to 1.6.5:
14.01.2015/1.6.5
FauxSound support added
Dynamic read ahead
Download within the OP, have fun
Click to expand...
Click to collapse
Thanks
Working well so far, thanks :good:
marcdw said:
Heh, I managed to screw up my MultiROM setup.
Fusion LP was a tertiary ROM. I decided to flash this kernel against it. Almost 10 minutes and it never finished flashing. TWRP was also frozen.
On restart none of the ROMs would boot. Trying to reselect Fusion in MultiROM would fail and freeze/lock TWRP. Seems the partition with Fusion got corrupted.
Got tired of pulling the battery so wound up restoring primary ROM and will start over with MultiROM.
Just one of those things probably unrelated to the kernel itself.
I should have at least backed up the secondary ROM. Oh well. ?
Click to expand...
Click to collapse
I'm using it with Fusion as primary ROM with no problems. But flashing fusion itself takes close to ten minutes to flash, and the progress bar shows nothing until it's done. I was already on fusion, then flashed RIN and Multirom.
Never mind.
Working well with Euphoria.
Thanks for a great AOSP kernel
joshuajones said:
I'm using it with Fusion as primary ROM with no problems. But flashing fusion itself takes close to ten minutes to flash, and the progress bar shows nothing until it's done. I was already on fusion, then flashed RIN and Multirom.
Click to expand...
Click to collapse
I changed my primary SkyDragon ROM then reflashed kexec kernel and multirom. Discovered my CM11 was still there (cool) then reflashed Fusion.
Flashed RIN kernel but this time I waited. It took much longer than the ROM install.
But all is good. Fusion seems to be running great with RIN.
Thanks.
Sent from my LG-D851 using Tapatalk
Kernel is working great
I've used this Kernel on about 3 different LP ROM's (clean flash) and on each of them, the pull down menu appears and freezes after ending calls whether its being made or receiving them. If you are able to get out of the menu, the pull down no longer works. You must reboot for everything to return to normal...
Nothing says great batterylife except when it tells me 1 day 19 hours and hasnt been on a charger since 8 am
Nice kernel exelent battery and no complains for now ?
Been off charger all day with light use and its still going strong
scribbles92 said:
I've used this Kernel on about 3 different LP ROM's (clean flash) and on each of them, the pull down menu appears and freezes after ending calls whether its being made or receiving them. If you are able to get out of the menu, the pull down no longer works. You must reboot for everything to return to normal...
Click to expand...
Click to collapse
Done a few clean flashes since I started using this kernel but I'm not having this problem...
Moderators EDIT:
This thread can currently be found at it's new location
http://forum.xda-developers.com/nexus-9/development/kernel-sublime-t3145862
Thanks...MD
IntroductionMy primary goal with this kernel is to improve performance of the N9 while maintaining stability. My secondary goal with this kernel it to learn more about Linux kernel development. I am novice right now but I hope to sharpen my abilities and make original changes to improve the kernel.
DisclaimerUse at your own risk. I take no responsibility for anything that happens to your device. However, I will do my best to deliver a stable experience with this kernel.
Known Issues
You might get one random reboot after the initial install
[*]The 5.1.1 kernel from Google is know to get a warmer than previous iterations.
[*]Issue rebooting into recovery and boot-loader.
Installation From Another Kernel
Reboot into TWRP 2.8.6+
Flash stock kernel
Flash Zeta kernel
Wipe caches
Reboot system
Wait for 10 minutes after it boots (recommended)
Enjoy!
Upgrading the Kernel
Reboot into TWRP 2.8.6+
Flash Zeta kernel
Reboot system
Wait for 10 minutes after it boots (recommended)
Enjoy!
Features
Latest Google 5.1.1 source
No forced encryption
F2Fs support
Elementalx governor
IO Schedulers: Noop, Cfq, Fiops, Sio, Bfq
Inteliplug
Init.d tweaks (WIP)
Kernel same-page merging
Optimizations
Uber 5.1
O3
Graphite
Loop nest optimizations
Cortex-a57 tuning
L1 and L2 cache tuning
Downloadhttps://basketbuild.com/devs/Beta1440/Nexus9/Zeta-Kernel
Suggested Configuration Apphttps://play.google.com/store/apps/details?id=com.grarak.kerneladiutor
Sourcehttps://github.com/Beta1440/Zeta_Kernel
Google+ Communityhttps://plus.google.com/communities/112104676437852830249
Credits
Sabermod for compiler optimizations
Linaro for Linaro tool-chain
Cl3Kerner for Uber tool-chain
Flar for Elementax
Faux for Faux Kernel
Franco for Franco Kernel
USBHost for Fire-Ice
Paget96 for init.d tweaks
Free Software Foundation for making this all possible
Google for AOSP
[/INDENT]
Changelogs
2.3.0
Merge in latest Google sources
Linux 3.10.40 -> 3.10.55
Add Intelliplug support
Usb fast charging
Add Elementalx cpu governor
Add Bfq i/o scheduler
Fixed reboot panic issue
Misc optimizations
2.2.3
Merge in latest Google sources
Add support for frandom
Reserved 2
Is there wake gesture support?
It's worth expected :silly:
ins5736 said:
Is there wake gesture support?
Click to expand...
Click to collapse
When I added Flar's wake gestures to the kernel, sweep 2 wake and sweep 2 sleep worked, but I was having issues with double-tap to wake. I'll try adding it in again later.
Beta1440 said:
When I added Flar's wake gestures to the kernel, sweep 2 wake and sweep 2 sleep worked, but I was having issues with double-tap to wake. I'll try adding it in again later.
Click to expand...
Click to collapse
Thanks! I like the sweep up/down in the elementalx kernel. It's a little thing, but I like it.
subscribed
Note:
if one disables DTW
one may get suspen problems
Beta1440 said:
When I added Flar's wake gestures to the kernel, sweep 2 wake and sweep 2 sleep worked, but I was having issues with double-tap to wake. I'll try adding it in again later.
Click to expand...
Click to collapse
I have issues on Elemental using the double tap gesture, so it isn't anything you did, it's the gestures themselves.
App for Kernel
app recommended for managing this kernel ???
So what is the consensus???
Sadly, I've yet to get this to boot. Probably doing something wrong lol. Oh well
gravin said:
app recommended for managing this kernel ???
Click to expand...
Click to collapse
https://play.google.com/store/apps/details?id=com.grarak.kerneladiutor
ChristianJay said:
So what is the consensus???
Click to expand...
Click to collapse
It might be a little too early to get a consensus. There are still lots of things I would like to add and change.
the 5.1 toolchain + fixes in the kernel causes undefined instruction #0 when the device sleeps or something. Even when you power off the device in the menu it will restart instead. Tested this kernel and my own compiled kernel.
cLeAv0 said:
the 5.1 toolchain + fixes in the kernel causes undefined instruction #0 when the device sleeps or something. Even when you power off the device in the menu it will restart instead. Tested this kernel and my own compiled kernel.
Click to expand...
Click to collapse
Are you referring to this commit?
https://github.com/Beta1440/Zeta_Kernel/commit/b3c0ea1161cc7ab522fc43931f5aa317ece035ac
I wasn't quite sure about how to solve this issue. Do you have a recommended solution?
Not sure what broke my auto brightness but it's gone. Anyone else?edit:Nm it suddenly returned.
Tested on Temasek Rom NOT work!!!
Question, this Kernel work only stock rom???
gravin said:
Tested on Temasek Rom NOT work!!!
Question, this Kernel work only stock rom???
Click to expand...
Click to collapse
Right now it's for AOSP based ROMs however I could make a CM version if the demand is there.
Beta1440 said:
Right not it's for AOSP based ROMs however I could make a CM version if the demand is there.
Click to expand...
Click to collapse
If it's not too difficult, it would be awesome to have a CM version as well.