[Q&A] [TOOL/UTILITY][TWRP][ 2.8][RECOVERY] TWRP 2.8.3.x TeamWin Recovery Project 12/
Q&A for [TOOL/UTILITY][TWRP][ 2.8][RECOVERY] TWRP 2.8.3.x TeamWin Recovery Project 12/23
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [TOOL/UTILITY][TWRP][ 2.8][RECOVERY] TWRP 2.8.3.x TeamWin Recovery Project 12/23. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
help reboot in recovery
Sorry, I flashed yesterday the last release of CyanogenMod 12 lollipop 5.0.2 and now the last twrp 2.8.3.0. I lost the recovery option in reboot menu. There is an option in android another method for have that option??
Thanks
unable to install TWRP on Samsung Galaxy Note 2 N7100
Hello,
I want to install TWRP 2.8.3.x in my Samsung Galaxy Note 2 N7100. I downloaded the relevant .tar files for ODIN, my phone in download mode was detected in ODIN, loaded the file in AP (ODIN) and started the flashing. But my recovery mode is still the same old stock ones and says NO COMMAND. Where could I have gone wrong?
Kindly rep soon.
nandish.gr said:
Hello,
I want to install TWRP 2.8.3.x in my Samsung Galaxy Note 2 N7100. I downloaded the relevant .tar files for ODIN, my phone in download mode was detected in ODIN, loaded the file in AP (ODIN) and started the flashing. But my recovery mode is still the same old stock ones and says NO COMMAND. Where could I have gone wrong?
Kindly rep soon.
Click to expand...
Click to collapse
Have you tried using the zip update method in TWRP itself?
TWRP
Sorry no. I did not try.
Can you give me a small hint how do I do it?
Also, should my phone be factory reset while I perform all these?
nandish.gr said:
Sorry no. I did not try.
Can you give me a small hint how do I do it?
Also, should my phone be factory reset while I perform all these?
Click to expand...
Click to collapse
Install it like any rom. You do not need to factory reset.
TWRP
bigbiff said:
Install it like any rom. You do not need to factory reset.
Click to expand...
Click to collapse
OK. So it is like copy the TWRP .zip file to external sd card, power off the phone, vol up+power button+home button. Then choose "apply update from external storage"
Attached images are showing while flashing
Please help
nandish.gr said:
OK. So it is like copy the TWRP .zip file to external sd card, power off the phone, vol up+power button+home button. Then choose "apply update from external storage"
Attached images are showing while flashing
Please help
Click to expand...
Click to collapse
Try re-downloading. The zip is corrupted. If you can't open it in 7zip you know there is an issue.
Hi,
Before installing TWRP i understand that I first need to unlock the bootloader.
But there is no download link for N7100XXUEMK9 firmware in the respective thread.
Attached is the screenshot of my phone's stock firmware. Can I go ahead and flash the MJ5BLpatch.tar.md5 using ODIN?
then the respective wifi patch and then the TWRP?
Then flash the rom DN4 tim through TWRP?
Please guide me through this. I've been tryin stuffs for a while.
Thank again.
Hello?
TWRP 2.8.4.0 for Note 2 (GT-N7100)
Maybe I am missing something however I was unable to find a zip file for TWRP 2.8.4.0 (Samsung Galaxy Note 2 - GT-N7100) Am I missing something, here is the visited (YOU ARE HERE:HOME » PROJECT » TWRP2 » SAMSUNG GALAXY NOTE 2 N7100)
boscofernandes said:
Maybe I am missing something however I was unable to find a zip file for TWRP 2.8.4.0 (Samsung Galaxy Note 2 - GT-N7100) Am I missing something, here is the visited (YOU ARE HERE:HOME » PROJECT » TWRP2 » SAMSUNG GALAXY NOTE 2 N7100)
Click to expand...
Click to collapse
n7100 == t03g http://techerrata.com/browse/twrp2/t03g
download stuck at 99%
Is the latest version 2.8.6.0 available for N7100?
mobile network problem
I've already install twrp with odin On my note 2.but i have problem...mobile does not recognize the sim card...please help me
vahidma71 said:
I've already install twrp with odin On my note 2.but i have problem...mobile does not recognize the sim card...please help me
Click to expand...
Click to collapse
Which variant do you have? Can you try restoring modem partition?
bigbiff said:
Which variant do you have? Can you try restoring modem partition?
Click to expand...
Click to collapse
I've already get a modem for it bu it's not specialy for my region....fortunately it's working
But i don't know that the right way or not...
tnx for your helping at all
My device is GT-N7105T, I have 2.8.5.0 installed, now when create a backup, should i just have BOOT, SYSTEM and DATA checked? what about EFS, RECOVERY and MODEM?
tempodata said:
My device is GT-N7105T, I have 2.8.5.0 installed, now when create a backup, should i just have BOOT, SYSTEM and DATA checked? what about EFS, RECOVERY and MODEM?
Click to expand...
Click to collapse
First backup, all partitions
Subsequent backup, boot, system and data
I have an old TWRP recovery on my Note II, how can I update it to the latest TWRP recovery? Thanks
Related
Hey
I been looking in the forums, but I havent be able to finde if there is a root for kitkat.
Do anyone know if that is one and if so, can you plz link to the thread
Thaning you in advance
Yes: http://autoroot.chainfire.eu
Although I have a p600 and his method worked fine for JB and KK.
Don't use the P6700/601 cf-autoroot on your P605. It will brick it...
The old cf-autoroot is for JB and doesn't work on KK...
Go to the Original developement thread and look at the TWRP 2.7.0.1 thread. It will supply answers and links...
ultramag69 said:
Don't use the P6700/601 cf-autoroot on your P605. It will brick it...
The old cf-autoroot is for JB and doesn't work on KK...
Go to the Original developement thread and look at the TWRP 2.7.0.1 thread. It will supply answers and links...
Click to expand...
Click to collapse
Hi,
TWRP 2.7.0.1 not work to P605XXUCNE2 !!!
What recovery works?
@+
Pyrana
Root p605kitkat 4.4.2
Hi All, hope I'm posting this is the right forum .Im quite a beginner in Android terms so please be patient with me ...
I have a Galaxy Note 10.1 2014 sm-p605 and use it while travelling , i dont have a computer with me most of the time so i rely on the tablet for most of what i do , yesterday i have updated to android 4.4.2 kitkat , whitout knowing i would loose full access to my 32 Gb SD card...well that made me quite furious as most people...so i decided try rooting it , after backing up all my files i used CF Auto Root ( CF-Auto-Root-lt03lte-lt03ltexx-smp605.zip , well that didnt quite work as i was getting
the boot loopwith the message RECOVERY IS NOT SEANDROID ENFORCING, after much reading i was able to recover the tablet to boot back , no rooting was done but im pretty sure i triggered knox and voided the warranty ....anyway i still want to try getting full access to my SD card, either by rooting it or any other way ,if there is a valid file explorer app without root i am keen to know, or if anyone can show me the way to root this device I will really appreciate.Device Details:
AP605ZSUCNE3
CP: P605ZSUCNE1
csc605OZSUCNE3
KitKat 4.4.2
With all do respect TWRP 2.7.0.1 does work on 4.4.2
I have it working myself.
Now To gain root on 4.4.2, install Autoroot - Chainfire for the SM P905
Then search the forums for a P605 recovery (Its somewhere here)
Youll get full root with original stock recovery. Then flash TWRP 2.7.0.1 and then youll be fine.
Remember the current TWRP version on the main post isnt the correct version...Further into the thread there is the correct version.
Need any help. as per always im on Facebook and Am happy to teamviewer in
fkofilee said:
With all do respect TWRP 2.7.0.1 does work on 4.4.2
I have it working myself.
Now To gain root on 4.4.2, install Autoroot - Chainfire for the SM P905
Then search the forums for a P605 recovery (Its somewhere here)
Youll get full root with original stock recovery. Then flash TWRP 2.7.0.1 and then youll be fine.
Remember the current TWRP version on the main post isnt the correct version...Further into the thread there is the correct version.
Need any help. as per always im on Facebook and Am happy to teamviewer in
Click to expand...
Click to collapse
No need to flash auto root for P905 just flash supersu from recovery TWRP 2.7.0.1 WORKS on 4.4.2!!!!
alex_72gr said:
No need to flash auto root for P905 just flash supersu from recovery TWRP 2.7.0.1 WORKS on 4.4.2!!!!
Click to expand...
Click to collapse
Hi,
Test TWRP 2.7.0.1 and no found !! to Kitkat
Big problem screen fully striped and very difficult to restore! And autoroot is a disaster!
Alan-B said:
Hi,
Test TWRP 2.7.0.1 and no found !! to Kitkat
Big problem screen fully striped and very difficult to restore! And autoroot is a disaster!
Click to expand...
Click to collapse
Mate, you were told cf-autoroot DOESN'T work and will screw things up... Why did you flash over something not working right?
You needed to find the stock recovery first, then flash 2.7.0.1 (not 2.7.0.0) to get TWRP installed. You then flash latest supersu using TWRP. This will root your device and give you a custom recovery..
The only thing is TWRP can't make a backup to the External sd card if you have it formatted exFAT...
Best advice, flash stock rom (kitkat only) again using PC ODIN, try again...
ultramag69 said:
Mate, you were told cf-autoroot DOESN'T work and will screw things up... Why did you flash over something not working right?
You needed to find the stock recovery first, then flash 2.7.0.1 (not 2.7.0.0) to get TWRP installed. You then flash latest supersu using TWRP. This will root your device and give you a custom recovery..
The only thing is TWRP can't make a backup to the External sd card if you have it formatted exFAT...
Click to expand...
Click to collapse
Yep, autoroot for P605 hasnt been updated yet to 4.4.2
Yes you can flash twrp and then SU , I came from the full firmware reflash... I t was the only way to put root on at the time.
Alan-B said:
Hi,
Test TWRP 2.7.0.1 and no found !! to Kitkat
Big problem screen fully striped and very difficult to restore! And autoroot is a disaster!
Click to expand...
Click to collapse
You can follow those links to get what you need.
http://forum.xda-developers.com/showpost.php?p=53236030&postcount=19
alex_72gr said:
You can follow those links to get what you need.
http://forum.xda-developers.com/showpost.php?p=53236030&postcount=19
Click to expand...
Click to collapse
Hi,
Having installed TWRP 2.7.0.1 on P605XXUCNE2 everything planted me! over the boot rom recovery mode and more !!!!
I spent two hours to get to switch back download.J 'thought my Note2 LTE 2014 was dead!
Sorry for the translation, I'm French
Alan-B said:
Hi,
Test TWRP 2.7.0.1 and no found !! to Kitkat
Big problem screen fully striped and very difficult to restore! And autoroot is a disaster!
Click to expand...
Click to collapse
0. If you screwed something up, flashed a wrong recovery, flash the stock rom again. If you are stuck in a boot loop, there is plenty of thread about how to boot into odin mode from there.
1. Download attached TWRP 2.7.0.1, it works with P605. I have it myself.
2. Start the tablet, download SuperSU-v1.99r4.zip, place on SD Card.
3. Reboot into Odin mode, (VolDown+Home), flash TWRP. If your recovery is being restored, don't tick Auto Reboot in Odin and turn off manually after flashing, then boot into TWRP.
4. Boot into TWRP, reset to factory settings. You will be asked if you want Root at some point. I think it's when you reboot, I don't remember.
5. When booted into Android, see if SuperSU downloader app is there. If no - boot TWRP and look around, because you missed something.
If yes, reboot into TWRP again and flash UPDATE-SuperSU-v1.99r4.zip.
Congrats, you are now rooted.
xda_user_p600 said:
0. If you screwed something up, flashed a wrong recovery, flash the stock rom again. If you are stuck in a boot loop, there is plenty of thread about how to boot into odin mode from there.
1. Download attached TWRP 2.7.0.1, it works with P605. I have it myself.
2. Start the tablet, download SuperSU-v1.99r4.zip, place on SD Card.
3. Reboot into Odin mode, (VolDown+Home), flash TWRP. If your recovery is being restored, don't tick Auto Reboot in Odin and turn off manually after flashing, then boot into TWRP.
4. Boot into TWRP, reset to factory settings. You will be asked if you want Root at some point. I think it's when you reboot, I don't remember.
5. When booted into Android, see if SuperSU downloader app is there. If no - boot TWRP and look around, because you missed something.
If yes, reboot into TWRP again and flash UPDATE-SuperSU-v1.99r4.zip.
Congrats, you are now rooted.
Click to expand...
Click to collapse
Re hello,
he problem is that just after the flash TWRP nothing boot! or recovery (zebra screen) and reboot loop and very difficult to switch back to download due to the reboot loop!
Just TWRP 2.7.0.0 works with Version 4.3 Note: The 2.7.0.1 works with 4.3 rom or not ? just to test !
Thank you for the helps
Alan-B said:
Re hello,
he problem is that just after the flash TWRP nothing boot! or recovery (zebra screen) and reboot loop and very difficult to switch back to download due to the reboot loop!
Just TWRP 2.7.0.0 works with Version 4.3 Note: The 2.7.0.1 works with 4.3 rom or not ? just to test !
Thank you for the helps
Click to expand...
Click to collapse
Attached version works with 4.4.2 Nordic.
After you flashed wrong recovery and have "zebra screen", Make sure you flashed stock firmware after that. Don't try flashing anything else before you flash stock.
xda_user_p600 said:
Attached version works with 4.4.2 Nordic.
After you flashed wrong recovery and have "zebra screen", Make sure you flashed stock firmware after that. Don't try flashing anything else before you flash stock.
Click to expand...
Click to collapse
re...
I just tested a flash TWRP from your link, but it boot and stuck on the TAB 10.1 lte logo
Mate, flash Kitkat rom 1st then flash TWRP... Doing anything else is gonna get you in trouble...
2.7.0.1 TWRP has Kitkat recovery, not Jellybean so you will have issues if you flash on a Jellybean rom...
ultramag69 said:
Mate, flash Kitkat rom 1st then flash TWRP... Doing anything else is gonna get you in trouble...
2.7.0.1 TWRP has Kitkat recovery, not Jellybean so you will have issues if you flash on a Jellybean rom...
Click to expand...
Click to collapse
Re hello, and always attempts to boot and TWRP stuck on 10.1 NOTE and the red and blue lines jaune.testé logo with flash P605XXUCNE2_P605OXACNE2_P605XXUCNE2_HOME.tarre, boot in download mod and flash TWRP without reboot, then reboot manual recovery (stuck) Same with auto reboot and there is nothing not to have the display of recovery!
I understand you. Are you sure you're not missing anything? It might help to flash stock NEE again. In my case I ticked "Update boot loader", do you mind trying that?
Remember, TWRP is VolUp+Home. It should display colored text in the right upper corner on 2014 logo when booting, if it's entering recovery mode.
Hi,
Solved it is Ok....
Thanks
[Q&A] [TOOL/UTILITY][TWRP][ 2.8][RECOVERY] TWRP 2.8.1.0 TeamWin Recovery Project 10/
Q&A for [TOOL/UTILITY][TWRP][ 2.8][RECOVERY] TWRP 2.8.1.0 TeamWin Recovery Project 10/23
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [TOOL/UTILITY][TWRP][ 2.8][RECOVERY] TWRP 2.8.1.0 TeamWin Recovery Project 10/23. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
TWRP v2.8.0.0 for P605
Hi! - I also have the "TWRP v2.8.0.0 (external-) backup files not found on SD card"-problem! ... Only internal backup works (to: data\media\0\TWRP)! - If backing up to either external_sd (extSdCard) or USB storage, TWRP first seems to do the job (works, and works ...), but after reboot, no files are stored under: storage\extSdCard\TWRP or under data\media\0\TWRP, or on an attached USB stick/card-reader! ... Only backup to "internal storage" works (correctly?) - and everybody needs root-access for to move the backup to an external medium, especially, if the small 16GB internal memory is full!
I now have bought a Galaxy Note 4, the last week, have rooted it and have installed TWRP v2.8.1.0 on it. - There everything works perfectly! ... Why not on Note 10.1 2014? ... I still wait for the v2.8.1.0 update of TWRP for the P605 device. Will it change that issue?
cstratz said:
Hi! - I also have the "TWRP v2.8.0.0 (external-) backup files not found on SD card"-problem! ... Only internal backup works (to: data\media\0\TWRP)! - If backing up to either external_sd (extSdCard) or USB storage, TWRP first seems to do the job (works, and works ...), but after reboot, no files are stored under: storage\extSdCard\TWRP or under data\media\0\TWRP, or on an attached USB stick/card-reader! ... Only backup to "internal storage" works (correctly?) - and everybody needs root-access for to move the backup to an external medium, especially, if the small 16GB internal memory is full!
I now have bought a Galaxy Note 4, the last week, have rooted it and have installed TWRP v2.8.1.0 on it. - There everything works perfectly! ... Why not on Note 10.1 2014? ... I still wait for the v2.8.1.0 update of TWRP for the P605 device. Will it change that issue?
Click to expand...
Click to collapse
Do you have lt03wifiue?
No, I don't have the Wifi only version. The P605 is with LTE and Qualcom. - Are you sure, that I also can use the v2.8.1.0 of TWRP for the P600 (Wifi only tablet)?
Gesendet von meinem SM-N910F
cstratz said:
No, I don't have the Wifi only version. The P605 is with LTE and Qualcom. - Are you sure, that I also can use the v2.8.1.0 of TWRP for the P600 (Wifi only tablet)?
Gesendet von meinem SM-N910F
Click to expand...
Click to collapse
Please try one of the following depending on your bootloader:
http://techerrata.com/bigbiff/openrecovery-twrp-2.8.1.1-lt03ltexx-4.3.zip
http://techerrata.com/bigbiff/openrecovery-twrp-2.8.1.1-lt03ltexx-4.4.zip
Hi!... v2.8.1.1 /4.4 works perfectly! Thank you very much for your support!... Many people are using either the P600 or the P605 - and I believe, that the official support (also regarding tools to root them, or CyanogenMod) for these tablets is unfortunately a bit slow in contrast to Samsung phones... But somehow, with a bit luck, everything is to find somewhere... I like you!... Carsten
Gesendet von meinem SM-P605
Hello all I have rooted my note10.1 NI1 and I cannot flash any recoveries without boot looping has anyone tested this on on 10.1 WiFi. Version
Could someone please tell me where I can find themes for 2.8.x ?
Thank you!
Hi,
TWRP manager crashes when I try to install TWRP. I select the device as lt03wifiue and select openrecovery-twrp-2.8.1.0-lt03wifiue.img. Then, when I hit install recovery, it downloads and then asks me to verify the partition as /dev/block/mmcblk0p10. When I click yes, it starts and then crashes. I tried multiple twrp versions, but they all crash.
EDIT: I ended up doing it through odin.
maelopam said:
Hi,
TWRP manager crashes when I try to install TWRP. I select the device as lt03wifiue and select openrecovery-twrp-2.8.1.0-lt03wifiue.img. Then, when I hit install recovery, it downloads and then asks me to verify the partition as /dev/block/mmcblk0p10. When I click yes, it starts and then crashes. I tried multiple twrp versions, but they all crash.
EDIT: I ended up doing it through odin.
Click to expand...
Click to collapse
Sorry, it's been doing that for a while. We don't maintain the app, and you should report it to the developer.
I want to download 2.8.5 for p601 but on the twrp website, the latest version is 2.8.0 How can i get 2.8.5?
Can someone give me a link to Download TWRP For Galaxy note 10.1 P601 ?
Except This one which is Corrupt !
techerrata . c o m
S1avash said:
Can someone give me a link to Download TWRP For Galaxy note 10.1 P601 ?
Except This one which is Corrupt !
techerrata . c o m
Click to expand...
Click to collapse
http://dl.twrp.me/lt03wifiue/
I'm trying to install the xposed zip that's been released for the Samsung devices but due to the unsigned zip I need something other than stock recovery. I've been able to sign the zip but when I try to install I receive a bad header (or very similar) message. Obviously I'd like to try and keep the device as close to stock regarding kernal and recovery as possible, but to gain other features the custom recovery is the way to go.
I've decided on using TWRP but can't find a compatible build.
Where would I ask to see if a build for this version can be had and what would I need to provide to facilitate the build. I own a Samsung SM-P607T (lt03ltetmo), Galaxy Note 10.1 (2014 version).
It appears that I've been able to get a good backup of the stock kernal and recovery including what appears to be a valid backup of all the blocks for the device.
I've used Chainfires adb insecure to try and install the zip file, but that turns USB debugging off and I haven't found a work around or fix for that yet.
Thanks for your help.
mlutzow said:
I'm trying to install the xposed zip that's been released for the Samsung devices but due to the unsigned zip I need something other than stock recovery. I've been able to sign the zip but when I try to install I receive a bad header (or very similar) message. Obviously I'd like to try and keep the device as close to stock regarding kernal and recovery as possible, but to gain other features the custom recovery is the way to go.
I've decided on using TWRP but can't find a compatible build.
Where would I ask to see if a build for this version can be had and what would I need to provide to facilitate the build. I own a Samsung SM-P607T (lt03ltetmo), Galaxy Note 10.1 (2014 version).
It appears that I've been able to get a good backup of the stock kernal and recovery including what appears to be a valid backup of all the blocks for the device.
I've used Chainfires adb insecure to try and install the zip file, but that turns USB debugging off and I haven't found a work around or fix for that yet.
Thanks for your help.
Click to expand...
Click to collapse
Have you tried lt03lte version of TWRP yet?
bigbiff said:
Have you tried lt03lte version of TWRP yet?
Click to expand...
Click to collapse
bigbiff, no I haven't, probably being overly cautious on my part.
Would you mind if we took this offline and I ask some questions that I think you can answer for me, rellated.to trying to keep as close to stock as possible while using certain toolsets to enhance the tablet experience.
I think I'll try that version later today, when I have some time...I hadn't noticed it when I was searching for a compatible version.
bigbiff said:
Have you tried lt03lte version of TWRP yet?
Click to expand...
Click to collapse
I need to correct myself, I did see that update. I'm on 5.1.1 and the latest version I've seen is 4.6 and I don't know what I'll break, if anything, or if I currently have the knowledge to roll back to functioning stock recovery if needed. Granted I have backups of the kernal and recovery (from two different sources), first 100 meg blocks...all the device blocks and partitions. It's been about 8 years since I was able to setiously pursue testing and many things have changed on me.
mlutzow said:
bigbiff, no I haven't, probably being overly cautious on my part.
Would you mind if we took this offline and I ask some questions that I think you can answer for me, rellated.to trying to keep as close to stock as possible while using certain toolsets to enhance the tablet experience.
I think I'll try that version later today, when I have some time...I hadn't noticed it when I was searching for a compatible version.
Click to expand...
Click to collapse
mlutzow said:
I need to correct myself, I did see that update. I'm on 5.1.1 and the latest version I've seen is 4.6 and I don't know what I'll break, if anything, or if I currently have the knowledge to roll back to functioning stock recovery if needed. Granted I have backups of the kernal and recovery (from two different sources), first 100 meg blocks...all the device blocks and partitions. It's been about 8 years since I was able to setiously pursue testing and many things have changed on me.
Click to expand...
Click to collapse
Please ask questions here for others benefit.
I am not sure what you are referring to with version 4.6. All you usually need is your stock odin firmware tar to return to stock using Odin.
bigbiff said:
Please ask questions here for others benefit.
I am not sure what you are referring to with version 4.6. All you usually need is your stock odin firmware tar to return to stock using Odin.
Click to expand...
Click to collapse
First, bigbiff I really appreciate your patience with me and taking the time to answer my questions and help me through this process.
I thought the 4.6 was the Android version the recovery was built for and I'm on 5.1.1 and thought I would run into issues considering what I'm reading about this 5.1.1 and the changes that have been incorporated.
My goal in this is to get xposed installed, functioning, and upgradeable if and when the opportunities present themselves, while remaining as close to stock as possible and not tripping that switch (whatever it's named) which for me is still 0x0 although the device status reads custom (fairly easily resolved with a full wipe and factory install is my understanding) .
Currently I'm rooted with Chainfires cf-auto-root for lt03ltetmo. Evrything still works, S-Pen, wireless, etc., etc., etc.
Clearly I need to install a custom recovery. In my reading I came across this thread: http://forum.xda-developers.com/gal...root-tmobile-sm-p607t-5-1-1-firmware-t3215541 and a modded kernal from this thread: http://forum.xda-developers.com/galaxy-note-10-2014/general/root-root-stock-kernel-t3240218. With my current root status and SuperSu installation I'm thinking I need to clean up and uninstall SuperSU and then proceed with the above recommendations.
That is unless just installing the TWRP you mentioned will get me to a stable position.
I'm just looking for the best method to use to get the xposed installed that leaves me with the fewest or no issues as far as using the tablet.
Any recommendations are greatly appreciated.
Hello, I have a Galaxy Note 10.1 2014 Edition. SM-P600. Running Stock 5.1.1 and Rooted.
I am looking for correct TWRP .tar file to flash with ODIN. Thanks.
[Q&A] [TOOL/UTILITY][TWRP][ 2.8][RECOVERY] TWRP 2.8.1.0 TeamWin Recovery Project 10/
Q&A for [TOOL/UTILITY][TWRP][ 2.8][RECOVERY] TWRP 2.8.1.0 TeamWin Recovery Project 10/23
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [TOOL/UTILITY][TWRP][ 2.8][RECOVERY] TWRP 2.8.1.0 TeamWin Recovery Project 10/23. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
@ bigbiff
Any positive news about TWRP for Note 3 Neo Duos (N 7502) ?
Have any chance to make it for us ?
Thank You very much in advance !
@ bigbiff
Will we have TWRP for N 7502 ?
cegevara said:
@ bigbiff
Will we have TWRP for N 7502 ?
Click to expand...
Click to collapse
I have not had a chance yet.
Help failed now im ****t
Please i need somones help..
i flashed a twrp recovery.img file throu Flaisfy.And when it rebooted i go stuck at boot loop and when i try go in to
recovery mode it doesnt work, nothing happends.
But i can still go to dowload mode. So what should i do i dont care about root anymore i ll do whatever it takes to be aable to start my phone again.
my phone is Note 3 neo(sm-n7505)
EndritPrince said:
Please i need somones help..
i flashed a twrp recovery.img file throu Flaisfy.And when it rebooted i go stuck at boot loop and when i try go in to
recovery mode it doesnt work, nothing happends.
But i can still go to dowload mode. So what should i do i dont care about root anymore i ll do whatever it takes to be aable to start my phone again.
my phone is Note 3 neo(sm-n7505)
Click to expand...
Click to collapse
Use odin to flash the tarfile in download mode.
Well, I have a problem with flashing : 3 I flashed the Recovery and such yet it just stops on the logo of "Samsung Galaxy Note 3 Neo" And it doesn't do anything farther than that, I also renamed the file in System which prevents booting into it as I have read somewhere else, Yet, When I flash back the stock recovery it works perfectly. : 3 Can anyone help?
I have the same problem!
I flashed the recovery "openrecovery-twrp-2.8.0.0-hlltexx.img.tar" with ODIN (tried V3.07, V3.09 and V3.10). But the phone stucks at the samsung logo when I try to boot into recovery. Booting the ROM (4.4.2) is still possible but I can't boot into the recovery.
How to flash TWRP on a SM-N7505??
full2000 said:
I have the same problem!
I flashed the recovery "openrecovery-twrp-2.8.0.0-hlltexx.img.tar" with ODIN (tried V3.07, V3.09 and V3.10). But the phone stucks at the samsung logo when I try to boot into recovery. Booting the ROM (4.4.2) is still possible but I can't boot into the recovery.
How to flash TWRP on a SM-N7505??
Click to expand...
Click to collapse
There are 2 different bootloaders for this device. Make sure you flash the latest version of TWRP as well 2.8.4.0. You either need 4.3 or 4.4 bootloader version depending on what you have installed. If one doesn't work try the other one.
my indian version note 3 neo sm-n750 twrp not working
after flashing it in recovery mode i get an error while flashing that
FOOTER IS WRONG
SIGNATURE VERIFICATION FAILED
guy please help me out its urgent
thnx in advance
harshals1 said:
after flashing it in recovery mode i get an error while flashing that
FOOTER IS WRONG
SIGNATURE VERIFICATION FAILED
guy please help me out its urgent
thnx in advance
Click to expand...
Click to collapse
Sounds like a bad download for Odin.
I have downloaded it from twrp site and its zip file i have downloaded so please help me how to fix it
harshals1 said:
I have downloaded it from twrp site and its zip file i have downloaded so please help me how to fix it
Click to expand...
Click to collapse
Check the md5sum of the file to what the site says on the download page.
bigbiff said:
Check the md5sum of the file to what the site says on the download page.
Click to expand...
Click to collapse
im not able to see twrp of my phone note 3 neo sm-n750
i think i downloaded wrong model twrp
please you share me a link of twrp of my phone
as im new to this developer site so i dont know how to exactly use it
thnx in advance
yes
yes , just download the 4.4.2 version of the recovery!
My odin gets stuck on recovery.img
Hey am new here
And I've tried rooting my phone-[debug is on]
hope someone can provide a way to apply this recovery and resolve my error!
Help With TWRP for Note 3 Neo N7506V
I need to install a custom ROM since the phone came from China and cant run any google app whatsover and non of the versions released of
TRWM seems to work. Help please!!!!!!
Twrp restore problem
Hello, I used twrp to backup my rom+user data!
after format, it doesnt show up in 'restore' on my other Note3neo.
whats that?
cusp07 said:
Hello, I used twrp to backup my rom+user data!
after format, it doesnt show up in 'restore' on my other Note3neo.
whats that?
Click to expand...
Click to collapse
If you formatted internal storage, the backup is gone. How did you do the format?
reply
bigbiff said:
If you formatted internal storage, the backup is gone. How did you do the format?
Click to expand...
Click to collapse
Hello, I had transferred the backup to extSD and copied to other phone.
Anyways i managed to solve the problem by putting the backup at approp. place in new phone!
thnx for feedback!
Asking as a curious user,can you share what changes will have to be made for twrp for Lollipop
---------- Post added at 03:09 PM ---------- Previous post was at 02:59 PM ----------
Sir, I have to use ' system.ext4.win' from backup and rename it to system.ext4.tar and then extract it, for making a flashable zip of mine .
But i found two such files in my backup, namely
'system.ext4.win000' --1.5gb
and 'system.ext4.win001'. --245mb
Which shall i use?
Much appreciate your response @bigbiff
Q&A for [RECOVERY][nozomi] TWRP 2.8.5.0 touch recovery [2015-02-12]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY][nozomi] TWRP 2.8.5.0 touch recovery [2015-02-12]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
locked bootloader
m1st3r1 said:
for cwm, there is cwm (and twrp also) for locked bootloader, but it cant flash any kernel (due to locked bootloader). in summary you stuck with stock kernel (that can only be flashed with flashtool or similar tools (if any ) with locked bootloader.
Click to expand...
Click to collapse
Sorry, I'm a bit beginner...
Does this mean that
1. if I use the procedure on page http://teamw.in/project/twrp2/144 in section Download - Stock Kernel:
2. then I can install any ROMs? For example this one? http://forum.xda-developers.com/xperia-s/s-development/rom-naosprom-xperia-s-t2958516
?
Mickey8881 said:
Sorry, I'm a bit beginner...
Does this mean that
1. if I use the procedure on page http://teamw.in/project/twrp2/144 in section Download - Stock Kernel:
2. then I can install any ROMs? For example this one? http://forum.xda-developers.com/xperia-s/s-development/rom-naosprom-xperia-s-t2958516
?
Click to expand...
Click to collapse
Flashing TWRP would require unlocked bootloader. First unlock Your bootloader, then follow the procedure from here.
From Your other post, it turns out You cannot unlock bootloader, so You can flash only sock based ROM's which work on Stock kernel.
Why is there no version 2.8.6.0 for Xperia S?
Hello guys,
I'm just download and install TWRP manager from google play and i'm trying to install the recovery. I'm choosing device name as LT26i but no recovery file is detected.
If i choose device name as "nozomi" i can find everything but my original device name is LT26i.
What to do? Are you suggest to try with nozomi and install the recovery?
Captainlag said:
Hello guys,
I'm just download and install TWRP manager from google play and i'm trying to install the recovery. I'm choosing device name as LT26i but no recovery file is detected.
If i choose device name as "nozomi" i can find everything but my original device name is LT26i.
What to do? Are you suggest to try with nozomi and install the recovery?
Click to expand...
Click to collapse
Nozomi is the code name for LT26i/LT26ii, so You can use it with no problems.
Unable to recovery
I can't flash any recovery file !!!
While I'm trying to install it returns this:
Something is wrong
------------------------
Flashing recovery was
unsuccessful.Either you already
have this recovery installed or
another error has occured.Would
you like to attempt rebooting to
recovery now?
NO YES
Captainlag said:
I can't flash any recovery file !!!
While I'm trying to install it returns this:
Something is wrong
------------------------
Flashing recovery was
unsuccessful.Either you already
have this recovery installed or
another error has occured.Would
you like to attempt rebooting to
recovery now?
NO YES
Click to expand...
Click to collapse
Which method are You following? Try the method from here.
Thank you for your help Mirhawk, but it doesn't work
Captainlag said:
Thank you for your help Mirhawk, but it doesn't work
Click to expand...
Click to collapse
What error are You getting?
Mirhawk said:
What error are You getting?
Click to expand...
Click to collapse
There is no error but I'm trying to reboot in recovery mode and it's immpossible
Captainlag said:
There is no error but I'm trying to reboot in recovery mode and it's immpossible
Click to expand...
Click to collapse
Hope You are pressing volume up button 2-3 times when Sony appears while booting the phone. Also, what ROM are You on?
Mirhawk said:
Hope You are pressing volume up button 2-3 times when Sony appears while booting the phone. Also, what ROM are You on?
Click to expand...
Click to collapse
Of course I'm pressing volume up button 2-3 times ....
My phone is on 6.2.B.1.96 stock with unlocked bootloader
Captainlag said:
Of course I'm pressing volume up button 2-3 times ....
My phone is on 6.2.B.1.96 stock with unlocked bootloader
Click to expand...
Click to collapse
I just wanted to clarify the first point since I have come across some people who didn't follow correct procedure. Glad You are doing it properly.
Ah yes, that is the problem. This method doesn't work on stock firmwares. Use the method from here to get recovery.
Mirhawk said:
I just wanted to clarify the first point since I have come across some people who didn't follow correct procedure. Glad You are doing it properly.
Ah yes, that is the problem. This method doesn't work on stock firmwares. Use the method from here to get recovery.
Click to expand...
Click to collapse
I suppose that i have to follow "method 2", right?
And what to do with the .zip file?
Captainlag said:
I suppose that i have to follow "method 2", right?
And what to do with the .zip file?
Click to expand...
Click to collapse
Method 1. You need recovery for method 2. If You have unlocked bootloader, You can simply flash the DoomKernel too. You can find it here. Use the blue "Download Now" button, and the file has .elf extension. You can flash it via flashtool, it consists of CWM and TWRP and works with stock ROM.
@Mirhawk: Many many thanks !!! :victory:
Finally , I have recovery with Doomkernel.
Thanks a lot and keep moding
I think I messed up my S
Hi
Trying to root my S and install nAOSProm I followed the instructions in the main thread. I successfully unlocked the bootloader and got the device rooted (SuperSU installed and updated in play store), but when attempting to use the TWRP manager to install TWRP I just got an error message that it wasn't successful. I then did this as I read earlier in this thread: fastboot flash boot 2.8.4.1.img. When I started the phone, it immediately boots into the TWRP but I can't get anywhere from there. Impossible to continue to the OS. When I connect it to the computer I just get an exclamation point in the device manager and I can't seem to find the correct drivers (I've installed the FlashTool Xperia Driver Pack). The phone worked perfectly in windows in both normal mode and fastboot previously. Since the phone doesn't have an external memory card, and since I can't transfer any files to it from Windows, I'm stuck in TWRP.
Is it bricked or can I get out of here?
nielsen81 said:
Hi
Trying to root my S and install nAOSProm I followed the instructions in the main thread. I successfully unlocked the bootloader and got the device rooted (SuperSU installed and updated in play store), but when attempting to use the TWRP manager to install TWRP I just got an error message that it wasn't successful. I then did this as I read earlier in this thread: fastboot flash boot 2.8.4.1.img. When I started the phone, it immediately boots into the TWRP but I can't get anywhere from there. Impossible to continue to the OS. When I connect it to the computer I just get an exclamation point in the device manager and I can't seem to find the correct drivers (I've installed the FlashTool Xperia Driver Pack). The phone worked perfectly in windows in both normal mode and fastboot previously. Since the phone doesn't have an external memory card, and since I can't transfer any files to it from Windows, I'm stuck in TWRP.
Is it bricked or can I get out of here?
Click to expand...
Click to collapse
Flash stock firmware ftf using flash mode in flashtool and then follow the instructions from here.
Or else:
Boot Your phone into recovery. Connect it to PC. Right click on the device in Device Manager, select update drivers, "browse my computer", then "let me pick from list" then select the driver similar to "Sony a0109 ADB drivers" (number may vary). Then You will be able connect to phone via adb. Then use following command to push the ROM and gapps to the phone internal memory:
Code:
adb push ROM.zip /sdcard/
adb push gapps.zip /sdcard/
This will copy the the ROM and gapps to phone which You can flash via recovery easily then.
worked perfectly! thanks for your time and help, much appreciated!
Q&A for [N5120][LTE] UNOFFICIAL CYANOGENMOD-5.1.1
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [N5120][LTE] UNOFFICIAL CYANOGENMOD-5.1.1. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
rgib said:
Uploaded New Build.
I need testers, thanks.
Click to expand...
Click to collapse
Ok, will make a try. I am now on cm-11-20141008-SNAPSHOT-M11
with CWM-based Recovery v6.0.4.7
Its my working device so I need to make shure ability to go back
to the state where it is now, including data, system etc.
So if you can tell me in short steps what to save with recovery and how
to reach there again I will help you testing with my device which is
truly LTE 5120 Europe Version.
baerenbisch said:
Ok, will make a try. I am now on cm-11-20141008-SNAPSHOT-M11
with CWM-based Recovery v6.0.4.7
Its my working device so I need to make shure ability to go back
to the state where it is now, including data, system etc.
So if you can tell me in short steps what to save with recovery and how
to reach there again I will help you testing with my device which is
truly LTE 5120 Europe Version.
Click to expand...
Click to collapse
* you should flash my updated TWRP recovery using Odin
* make a full backup
* then install rom-gapps-supersu
* if you have problem : reboot to recovery and restore your previous backup
rgib said:
* you should flash my updated TWRP recovery using Odin
Click to expand...
Click to collapse
There
http://teamw.in/devices/samsunggalaxynote80.html
is no version for N-5120...
Can I use my existing "CWM-based Recovery v6.0.4.7" instead?
baerenbisch said:
There
http://teamw.in/devices/samsunggalaxynote80.html
is no version for N-5120...
Can I use my existing "CWM-based Recovery v6.0.4.7" instead?
Click to expand...
Click to collapse
Yes
Hi there.
I have this device and willing to participate in the test of CM12 builds.
I own the n5120 and am interested in helping. But I need a little help first...
I have root but the version is too low. I need a recovery archive that will work with Android 4.4 and above. "CWM-based Recovery v6.0.4.7" sure would help me!
Can someone assist?
I've done full wipe: /system, /data, /cache, /data/media (internal memory). Then I've installed ROM zip (nothing else, no gapps or supersu). Archive was installed too fast IMO, faster than just copying zip file from sdcard to internal memory. Installation script reported status code '0.200000'. After reboot I've got 'infinite' boot animation (waited for 10 minutes, animation didn't stop and nothing else happened). Device became moderately warm.
Understood. It's not easy to work on a device I don't even own.
Gonna work on next release.
Thanks
Installation aborted
Tried to install via CWM-based Recovery v6.0.4.7.
Result :
Finding update package...
Opening update package...
E:Can't open /external_sd/.../cm-12.1....zip
(bad)
Installation aborted.
Do you have checksum for the zip-file?
lg,
baerenbisch
rgib said:
Understood. It's not easy to work on a device I don't even own.
Gonna work on next release.
Thanks
Click to expand...
Click to collapse
Big thanks to you that you are trying to do it, because I had no hope that my n5120 will get update.
I had infinite boot animation problem on Galaxy Note 2 (n7100). Somehow I've managed to start adb daemon during boot process, so I've got shell and logcat and solved the problem. Unfortunately, this was long ago and I cannot reproduce same thing on n5120. Maybe, if you guide me, I could start adb again during boot and get some logs for you?
---
---
rgib said:
New Build 13-May-2015
Click to expand...
Click to collapse
Still infinite boot.
---
rgib said:
After a full wipe ?
How long did you wait? It takes 10 minutes for the first boot.
Click to expand...
Click to collapse
Yes, full wipe. I waited 20 minutes or so.
---
hangs
Tested with TEST3 and hangs when booting using as the CWM recovery
Clean flashed test3 zip on my n5120, bootloop. tried SferaDev's rom, also the same.
Full wipe (/system, /cache, /data, /data/media/0, /tombstones). TEST#3 still stuck in boot animation. Waited for 20-25 minutes.
TEST #03 - Bootloop after fullwipe.
5120 user