Rom is developed by a Chinese developer and all credit goes to him and i personally very thank full to him.
And like to many Thanks to the Developer of Echoe Roms, only his developed kernel works very fine for my M919 with MIUI ROM
I got this Rom from official MIUI website, as Galaxy S4 I9505 custom roms can be flash on S4 M919 Tmobile version but all we need to look for Kernel to boot the rom and work flawlessly, so i have flashed this rom which is generated for I9505 on my Galaxy S4 Tmobile M919 but few issues were there from which wifi was not working so spending time on net and look for kernel and flashed few but could not get working one and then finally got one which works like charm. Rom is totally in English after Selecting English language for first boot
I am using this rom from one week and almost every thing works
Calling
Bluetooth
SMS
Camera
NFC
Wifi
Wifi Direct
GPS
and i am pretty sure others must be too
I love MIUI and i was happy to get MIUI for my M919 so like to share this rom who love to have MIUI on there Android devices
Flashing Method
Flashing method is same like we use to flash every rom, only after flashing rom do not reboot, flash Kernel first and then reboot.
I am using TWRP v2.7.1.0 and others recoveries will work too
I have change my model number in my Build.prop file, because it will show I9505 and you guys can do it too, just google it, it easy
Download
ROM
http://miuirom.xiaomi.com/rom/u3472249/4.11.3/miui_i9505_shiro_4.11.3_cc4f1bcf59_4.4.zip
Kernel
https://www.androidfilehost.com/?fid=23681161096070138
Wifi didn't work when i installed this rom.
justforgot said:
Wifi didn't work when i installed this rom.
Click to expand...
Click to collapse
did u flash the kernel?
wifi working absolutely fine with me
yea. i did. When i flash the kernal it doesn't boot up. Without kernal it boots up but no wifi.
justforgot said:
yea. i did. When i flash the kernal it doesn't boot up. Without kernal it boots up but no wifi.
Click to expand...
Click to collapse
i m having 4.4.2 kitkat bootloader and no bugs facing
so what bootloader u r on?
I followed flashing instructions to tthe t and im stuck on the samsung boot logo. What should i do?
Related
Hi, i searched everywhere in the AT&T section for a MIUI rom but only found a few which were stopped and had no new updates.
However i read somewhere on the forums here that you can use some n7105 roms in a i317 Note 2 Phone.
My question is, can i use the n7105 MIUI rom which was ported just 2 days ago?
If i cant, can someone point me in the right direction on using a newer version on MIUI on my Note 2 i317?
Thank you.
EDIT: I went ahead and installed the N7105 version but the phone wouldnt get past the XIOMI logo. I restored my phone back to the latest version found in the AT&T section 3.6.28.
Does anyone know how to get the n7105 version working? it was posted on the official MIUI forums 2 days ago and its the only version i have found that is n7105.
Or has anyone been able to install a newer version of MIUI? since it looks like the AT&T version has been discontinued.
The rom is fine ...but the kernel is likely putting you into a bootloop...
You may want to add another one in during the flash process that is compatible ...
I'd test neak kernel ....although not rated as compatible it may just work ...
And of course ...flash at your own risk ...and backup everything before hand ...g
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Awesome, thanks for the reply.
Just to be sure, can i flash the kernel right after i flash the rom? or do i have to replace the boot.img inside the rom?
Edit: I tried flashing the neak kernel after the n7105 Rom but I got a black screen after the Samsung logo. I then tried other kernels (k.k.o, soa, and perseus) but they kept me in the miui logo. When I tried to change the boot.img manually into the zip I got a failed error when trying to flash the Rom.
If anyone can get a newer version of miui v5 to work on I317 note 2 please let me know how.
Thank You.
UPDATE: Anyone out there wanting to install the latest MIUI V5 into their Note 2 i317, i have found a way to do it.
For the past few days i have been on a hunt for a version that works with my phone and this is what i found.
Thanks to jing95916 who ported MIUI v5 to n7105, i went ahead and installed his latest port today a few people have problems with WIFI not turning on, but this is what i did.
After installing v 3.9.27 MIUI i let it boot, noticed wifi didnt work, but i remembered someone mentioning that it could be the kernel so i flashed SOA_4412_Kernel_06 found in the AT&T section under the MIUI 3.6.8 thread on post #1. Everything seems to be working perfectly so far, phone calls, SMS, wifi. Though there is one thing i noticed, on that when you flip screens it leaves behind a trail right on the Dock, it goes away when you switch to settings but comes back unless you have a transition effect that doesnt overlap the dock like the crossfade one. Other than that everything else seems to be working fine. I will continue to test the rom and see if i can find any other problems, but for now im very happy thnx to jing95916 port!
Arcrueid said:
Awesome, thanks for the reply.
Just to be sure, can i flash the kernel right after i flash the rom? or do i have to replace the boot.img inside the rom?
Edit: I tried flashing the neak kernel after the n7105 Rom but I got a black screen after the Samsung logo. I then tried other kernels (k.k.o, soa, and perseus) but they kept me in the miui logo. When I tried to change the boot.img manually into the zip I got a failed error when trying to flash the Rom.
If anyone can get a newer version of miui v5 to work on I317 note 2 please let me know how.
Thank You.
Click to expand...
Click to collapse
Kernel flash after the rom is fine ..
But with your boot loops ...I'm wondering if you are wiping correctly ??
And verify that your files are compatible with the device ...g
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
gregsarg said:
Kernel flash after the rom is fine ..
But with your boot loops ...I'm wondering if you are wiping correctly ??
And verify that your files are compatible with the device ...g
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
The problem i had was a different version, the one ported by jing95916 works perfectly in my i317 note 2 even though his port is for n7105. So everything is all good now, pretty happy to be using the latest MIUI rom.
Hey guys. So, I've been reading and reading and flashing and everything.
Got an S4. It was running 4.3 and I was having Wifi issues.
I had read it was a software issue and welp, I've always liked Cyanogen Mod so I installed that.
It installed the nightly build which was WAY too buggy (I use my camera a lot and it kept failing) edit: but the WiFi worked perfectly!
I got back to 4.2.2 now but now the WiFi is Totally not working now and i'm getting that message about
Kernel is not Seandroid enforcing
set warranty bit : kernel
and it takes forever to reboot.
Since I was on 4.3 do i need to flash that stock rom to get my stock kernel back?
Or can I install deoxed version??
I still need to put custom recovery too!
I know this is a lot of questions and i'm not much of a n00b.
Any help would be greatly appreciated.
Thanks in advance.
re: wifi not working
djphooka said:
Hey guys. So, I've been reading and reading and flashing and everything.
Got an S4. It was running 4.3 and I was having Wifi issues.
I had read it was a software issue and welp, I've always liked Cyanogen Mod so I installed that.
It installed the nightly build which was WAY too buggy (I use my camera a lot and it kept failing) edit: but the WiFi worked perfectly!
I got back to 4.2.2 now but now the WiFi is Totally not working now and i'm getting that message about
Kernel is not Seandroid enforcing
set warranty bit : kernel
and it takes forever to reboot.
Since I was on 4.3 do i need to flash that stock rom to get my stock kernel back?
Or can I install deoxed version??
I still need to put custom recovery too!
I know this is a lot of questions and i'm not much of a n00b.
Any help would be greatly appreciated.
Thanks in advance.
Click to expand...
Click to collapse
If you are using any Cyanogen/AOSP/AOKP/GE/KiKat roms then please ignore the following.
If you are using a M919 Tmobile Samsung S4 Jellybean Touchwiz 4.2.2 based rom then here is
the way to fix your wifi issue.
Here is the download link for Ktoonsez's custom kernel:
http://ktoonsez.jonathanjsimon.com/sgs4/TW/KT-SGS4-JB4.2-TW-TMO-12.12.2013.zip
Download it and flash it using cwm/twrp recovery and the wifi will work for you again.
Good luck!
I'm running the stock rom but it seems like somehow it didn't overwrite the Cyanogen kernel.
re: kernel
djphooka said:
I'm running the stock rom but it seems like somehow it didn't overwrite the Cyanogen kernel.
Click to expand...
Click to collapse
That means that this kernel is for you..... "IF you are really running the stock rom".
If your rom was REALLY stock, I mean if you "ODIN" flashed the stock rom using the
official Samsung M919 4.2.2 Jellybean Touchwiz firmware from http://SamMobile.com
or other sources then whatever kernel you had the stock rom would have over-written it.
If you are sure that it's not over written that means that you have NOT ODIN flashed the
official 4.2.2 M919 MDL firmware.
Good luck!
Facing wifi problem on every custom rom I installed on my LG optimus G pro..
Working perfect on stock based roms.. Anybody know whats the issue ? Using cwm 6..0.4.7 and new phillz touch recovery to install roms but facing same problem.. When phone take first boot after installation the wifi is working but after some hours or next reboot the wifi will no more working.. Found something in build.prop
ro.wifi,channels= "blank"
I put some values of channel in it but it wont work
Plz help me..
Sorry for bad english
zohaibkhan143 said:
Facing wifi problem on every custom rom I installed on my LG optimus G pro..
Working perfect on stock based roms.. Anybody know whats the issue ? Using cwm 6..0.4.7 and new phillz touch recovery to install roms but facing same problem.. When phone take first boot after installation the wifi is working but after some hours or next reboot the wifi will no more working.. Found something in build.prop
ro.wifi,channels= "blank"
I put some values of channel in it but it wont work
Plz help me..
Sorry for bad english
Click to expand...
Click to collapse
It's not unusual for that entry in the build.prop to be blank, and shouldn't cause issues. I think the default there should be '11 11', though having it blank should be fine (pretty certain).
> Working perfect on stock based rom
Which roms are you flashing that are giving you problems? Many of the e980 roms are bugged out in various ways, maybe it's just a quirk of the one(s) you flashed? I had a similar problem recently, wifi just would *not* stay enabled, would not behave. I don't remember which rom it was though; I flash too much.
You've flashed the Kitkat 20g modem, yes? If all else flails, you could always flash back to Kitkat stock and start over, that's guaranteed to tell you whether its a hardware or software problem (if it persists after that: hardward, got to be).
help
culot said:
It's not unusual for that entry in the build.prop to be blank, and shouldn't cause issues. I think the default there should be '11 11', though having it blank should be fine (pretty certain).
> Working perfect on stock based rom
Which roms are you flashing that are giving you problems? Many of the e980 roms are bugged out in various ways, maybe it's just a quirk of the one(s) you flashed? I had a similar problem recently, wifi just would *not* stay enabled, would not behave. I don't remember which rom it was though; I flash too much.
You've flashed the Kitkat 20g modem, yes? If all else flails, you could always flash back to Kitkat stock and start over, that's guaranteed to tell you whether its a hardware or software problem (if it persists after that: hardward, got to be).
Click to expand...
Click to collapse
thanks for reply
I installed cm11 cm12 blisspop v1.0 1.1 .12 1.3 all these roms got same problem that is wifi
I m on JB 4.1.2 stock e98010p a&t
there is no wifi bugs in these custon roms.. only me facing this issue in every custom rom... Can u give me the kitkat firmware link e98020g ? I m gonna flash that rom then I will root my device on KK then I will try to flash custom roms and tell you about results.. thanks
plz provide link..
sorry for bad english
zohaibkhan143 said:
thanks for reply
I installed cm11 cm12 blisspop v1.0 1.1 .12 1.3 all these roms got same problem that is wifi
I m on JB 4.1.2 stock e98010p a&t
there is no wifi bugs in these custon roms.. only me facing this issue in every custom rom... Can u give me the kitkat firmware link e98020g ? I m gonna flash that rom then I will root my device on KK then I will try to flash custom roms and tell you about results.. thanks
plz provide link..
sorry for bad english
Click to expand...
Click to collapse
Booyah: E980 20g Kitkat TOT.
Also, with Lollipop roms, I don't think any of them are totally stable or functionally 100% yet, so that's not a place to go if you want stuff to work. There's plenty of nice Kitkat roms like PAC-rom or Carbon-Rom is you want stability and want for your phone to work fully (but thats no fun! ).
help
culot said:
Booyah: E980 20g Kitkat TOT.
Also, with Lollipop roms, I don't think any of them are totally stable or functionally 100% yet, so that's not a place to go if you want stuff to work. There's plenty of nice Kitkat roms like PAC-rom or Carbon-Rom is you want stability and want for your phone to work fully (but thats no fun! ).
Click to expand...
Click to collapse
Ok bro thanks for helping me
zohaibkhan143 said:
Ok bro thanks for helping me
Click to expand...
Click to collapse
bro I installed stock Kk and root my device but I unable to install cusom recovery using freegee app.. Any other way to install custom recovery ?
culot said:
Booyah: E980 20g Kitkat TOT.
Also, with Lollipop roms, I don't think any of them are totally stable or functionally 100% yet, so that's not a place to go if you want stuff to work. There's plenty of nice Kitkat roms like PAC-rom or Carbon-Rom is you want stability and want for your phone to work fully (but thats no fun! ).
Click to expand...
Click to collapse
bro I installed stock Kk and root my device but I unable to install cusom recovery using freegee app.. Any other way to install custom recovery ?
zohaibkhan143 said:
bro I installed stock Kk and root my device but I unable to install cusom recovery using freegee app.. Any other way to install custom recovery ?
Click to expand...
Click to collapse
Yoink.
^-- Freegee never lets me in unless I flash the Sphinx GPro Recovery CWM recovery first. Once that is done, it's all good.
culot said:
Yoink.
^-- Freegee never lets me in unless I flash the Sphinx GPro Recovery CWM recovery first. Once that is done, it's all good.
Click to expand...
Click to collapse
Thanks I will try it soon..!
culot said:
Yoink.
^-- Freegee never lets me in unless I flash the Sphinx GPro Recovery CWM recovery first. Once that is done, it's all good.
Click to expand...
Click to collapse
Installed sucesfully but one problem in this cwm..external_sd mounting failed cwm ver 6.0.4.4
help plz
zohaibkhan143 said:
Installed sucesfully but one problem in this cwm..external_sd mounting failed cwm ver 6.0.4.4
help plz
Click to expand...
Click to collapse
Oh, no, you misunderstood: you don't use the CWM, you only install it and then quickly install *over* it with one of Freegee's recoveries. Never use the Sphinx CWM, as you'll get errors when you go to flash roms. You only insatll the Sphinx CWM so that Freegee will recognize your device and function, it's only a stepping stone to Freegee, not a recovery you should use on its own.
And, in light of recent developments on the TWRP 2.8 front, I'd say give that a try instead. It mounts your external SD just fine. THe only things I've flashed with it are BlissPop builds and Gapps, but all without an issue yet. Go for the one with the Play theme and enjoy its gorgeous colors.
Thanks buddy.. Freegee recognized my device and installed cwm succesfully
Sent from my LG-E980 using XDA Free mobile app
help
after kitkat update now I m installed those custom roms again but still there is a same wifi problem sick off totally !
Hello,
Is there any kit kat touchwiz ROM available which is somewhat stable? I would like to be able to use tap n pay. I have a Verizon NOte 2 with such a ROM and it works great. I am upset that it is so hard to find a ROM for the tmobile phone.
I guess Tmobile never released kitkat for this phone?
Lol .. :sly:
Use S.W.A.R.M (Stock) or Test Rom 1.2 (it has some S5 apps - does not have wifi calling) follow all instructions for installing.
Sorry SWARM isnt KitKat. Rom of Thrones is - which is the base for my Test Rom 1.2 - Good Luck.
Double0EK said:
Use S.W.A.R.M (Stock) or Test Rom 1.2 (it has some S5 apps - does not have wifi calling) follow all instructions for installing.
Sorry SWARM isnt KitKat. Rom of Thrones is - which is the base for my Test Rom 1.2 - Good Luck.
Click to expand...
Click to collapse
Thanks,
I did try test ROm and my wifi wasn't working. I now know that its because I needed to update my baseband .. Which I have now done. SO ill give one of those a try.
I also understand that we can load AT&T roms on this phone as long as we are using the T889 Radio,,, so I am looking at those roms as well
ilmar72 said:
Thanks,
I did try test ROm and my wifi wasn't working. I now know that its because I needed to update my baseband .. Which I have now done. SO ill give one of those a try.
I also understand that we can load AT&T roms on this phone as long as we are using the T889 Radio,,, so I am looking at those roms as well
Click to expand...
Click to collapse
Yes. You can also try AGNi Kernel if Wifi still isnt working. From my experience 4.3.0 is the best so far.
Double0EK said:
Yes. You can also try AGNi Kernel if Wifi still isnt working. From my experience 4.3.0 is the best so far.
Click to expand...
Click to collapse
I had to flash the wifi fix. Im not sure if flashing a kernel would have fixed my wifi problem. As I understand; the issue is that my phone has the original bootloader that it was shipped with. it doesnt have the 4.3 OTA bootloader therfore I had to install this wifi fix.
SO now I have a Tmobile T889 running an ATT touchwiz rom... I have working LTE(LTE worked with Tmobile roms too). To get the LTE to work I had t flash the latest tmobile radio. My Google wallet tap n pay works again. I am extremely happy about this setup!
Oh... and I am using AT&T go as the service... not Tmobile
ilmar72 said:
I had to flash the wifi fix. Im not sure if flashing a kernel would have fixed my wifi problem. As I understand; the issue is that my phone has the original bootloader that it was shipped with. it doesnt have the 4.3 OTA bootloader therfore I had to install this wifi fix.
SO now I have a Tmobile T889 running an ATT touchwiz rom... I have working LTE(LTE worked with Tmobile roms too). To get the LTE to work I had t flash the latest tmobile radio. My Google wallet tap n pay works again. I am extremely happy about this setup!
Oh... and I am using AT&T go as the service... not Tmobile
Click to expand...
Click to collapse
Yes flashing a kernel would have fixed the wifi. Flashing the patch wouldve probably made things worse to be honest..now the only way to revert the patch is to odin back to the original firmware...
Im on 4.1.2 Bootloader myself. Havent upgraded to anything above that..i only flash kernels and the modems. Works fine for me. Only issue is the charging while phone is off doesnt work.
Which Rom did you use?
Hi, i need some advice about this problem, bcz i searched that a lot but i cdnt find anu solution. Any Lineage based roms, like Viperos, Strelka, Ressurection Remix, Aokp rom etc (Any 7.x.x too i guess) doesnt work well on my n7100. Im flashing them and they are booting fine too, But when the screen came on, they says no sim, when i checked about device i dont see any info about modem. But imei is not erasing. Boot loader mj5, modem nd3 (i just changed it mj7 modem but still same) . When i flash stock rom or Hyper rom or any 4.x.x based rom works fine. I cdnt find any solution bcz i tried everything. Anyone can give me an idea about this ? bcz i stuck with 4.4.x roms. Thanks..
Is the phone running the latest by bootloader and modem? Some custom ROMs require a phone that is running the latest version of both.
audit13 said:
Is the phone running the latest by bootloader and modem? Some custom ROMs require a phone that is running the latest version of both.
Click to expand...
Click to collapse
Yes , found latest ones in here and flashed some time ago.
Did you update the bootloader and modem by flashing the latest stock rom or just the bootloader and modem? Not sure if this would make a difference.
audit13 said:
Did you update the bootloader and modem by flashing the latest stock rom or just the bootloader and modem? Not sure if this would make a difference.
Click to expand...
Click to collapse
I tried both way. Stock rom and 4.4.x based custom roms works fine. They were working fine with older modem and bootloader too. I tried to flash lineage based custom roms on working stock rom and custom 4.4.x too, w/o wipe. They did same thing, everything works fine just no sim silly right ?
Very strange that the sim is not detected. I don't have a note 2 to try out Lineage.
Did you post your question in the the ROM's thread in the Development Forum? Perhaps someone there could offer some more advice.
audit13 said:
Very strange that the sim is not detected. I don't have a note 2 to try out Lineage.
Did you post your question in the the ROM's thread in the Development Forum? Perhaps someone there could offer some more advice.
Click to expand...
Click to collapse
Yep its strange, i guess the real problem is those roms doesnt see what modem i have in device, bcz they are not showing that in about device. Thanks anyway, at least you tried to give some ideas
I didnt post my question in the rom's thread, let me try it.