Huhu,
i have issue with my usb connection.
If i connect it to the laptop it say Unknow Device (error code 43). Then it only charge.
I looking up the internet for 2 days now.
Someone said Unknow device is always a driver problem.
Found some driver called samsung/sgs2 driver. But that wasnt working.
Debugging modus also not help me.
Maybe someone have an other idea?
Try this
1. Turn off phone while still plugged in to your computer
2. Press Volume Button Up and then Power button to turn it on in bootloader/or recoverymode
3. You should hear a typical usb connecting sound. (if not you can unplug and plug the usb until you hear it)
4. Unplug it to hear the usb disconnecting sound.
4. Restart your phone and then allow it to turn on as usual, allow it to load everything before.. doing #5
5. Try plugging it in and test.
i tested it but not get a sound.
bootloader say waiting for usb ;/
Uninstall any previous drivers you installed and install these. http://forum.xda-developers.com/showthread.php?t=961956
They worked for me.
These are the drivers i already tried.
But they not work for me ;/
If you're laptop is Windows:
-install Samsung Kies....after that, plug your Glide, there should be a prompt "Installing device drivers" and/or "Searching Windows update..." Wait for that to be done and you should be able to connect.
Same thing with MAC,
I tried that befor but not work ;(
Does i have a chance to flash the phone without usb?
can i install CWM withouth odin?
huhu1312 said:
I tried that befor but not work ;(
Does i have a chance to flash the phone without usb?
can i install CWM withouth odin?
Click to expand...
Click to collapse
There might be a cwm flashable via rom manager soon if we get some testers with stock recovery to join #utkanos on freenode irc.
and someone know how to root without usb?
is there a functionally apk?
huhu1312 said:
and someone know how to root without usb?
is there a functionally apk?
Click to expand...
Click to collapse
So far, only way is through Odin on windows PC
because CPrisic
huhu1312 said:
Huhu,
i have issue with my usb connection.
If i connect it to the laptop it say Unknow Device (error code 43). Then it only charge.
I looking up the internet for 2 days now.
Someone said Unknow device is always a driver problem.
Found some driver called samsung/sgs2 driver. But that wasnt working.
Debugging modus also not help me.
Maybe someone have an other idea?
Click to expand...
Click to collapse
I have the same situation with my glide. But the problem was miserable. Once i've changed USB cable, everything became OK for me (other phones work good with old cable).
Try this. Maybe it could help
Hello everybody,
I received my OP3 yesterday and I'm quite happy with my phone, but I'm having an worrying problem with the USB connection. Indeed, I cannot seem to get the USB connection working in MTP mode. In fact, I cannot get anything else working than charging mode.
Things I already tried :
- Enabling USB debugging
- 3 different cables (OP2, OP3, no brand)
- Manually choosing MTP mode in developper options
- 2 different computers
Maybe the most worrying thing is that the Windows device manager doesn't see any device when I connect the phone, not even a device with an error...
I'm really starting to think this is a hardware problem
Please, HELP ! :crying:
Isayaa said:
Hello everybody,
I received my OP3 yesterday and I'm quite happy with my phone, but I'm having an worrying problem with the USB connection. Indeed, I cannot seem to get the USB connection working in MTP mode. In fact, I cannot get anything else working than charging mode.
Things I already tried :
- Enabling USB debugging
- 3 different cables (OP2, OP3, no brand)
- Manually choosing MTP mode in developper options
- 2 different computers
Maybe the most worrying thing is that the Windows device manager doesn't see any device when I connect the phone, not even a device with an error...
I'm really starting to think this is a hardware problem
Please, HELP ! :crying:
Click to expand...
Click to collapse
I had the same issue with my MXP and still have it with my OP. Just can't seem to get my pc to recognize them as storage devices.
A workaround I have found is to boot into twrp, then their recognized immediately and can be used as an external storage device.
I also got 'charging only' mode when I first connected OP3 to my laptop but after changing the settings at developer options I could do the file transfers and all.
I hope some of your privacy setting isn't messing up with it because AFAIK it shouldn't be a hardware problem.
I have the same issue.
---------- Post added at 05:22 AM ---------- Previous post was at 05:15 AM ----------
bruciebabie1963 said:
I have the same issue.
Click to expand...
Click to collapse
I turned off usb debugging and now my computer recognizes my device.
numbere said:
I had the same issue with my MXP and still have it with my OP. Just can't seem to get my pc to recognize them as storage devices.
A workaround I have found is to boot into twrp, then their recognized immediately and can be used as an external storage device.
Click to expand...
Click to collapse
Thing is I cannot unlock bootloader and install TWRP because the USB connection is needed for that
Beside, this is a 2 days old phone, I'm expecting it to work flawlessly...
Isayaa said:
Hello everybody,
I received my OP3 yesterday and I'm quite happy with my phone, but I'm having an worrying problem with the USB connection. Indeed, I cannot seem to get the USB connection working in MTP mode. In fact, I cannot get anything else working than charging mode.
Things I already tried :
- Enabling USB debugging
- 3 different cables (OP2, OP3, no brand)
- Manually choosing MTP mode in developper options
- 2 different computers
Maybe the most worrying thing is that the Windows device manager doesn't see any device when I connect the phone, not even a device with an error...
I'm really starting to think this is a hardware problem
Please, HELP ! :crying:
Click to expand...
Click to collapse
When you connect the phone, Marshmallow by default connects in charging mode.
- Swipe down and you will see USB for charging "Touch for more options"
- Select 'File Transfers'
Transfer files.
white43 said:
When you connect the phone, Marshmallow by default connects in charging mode.
- Swipe down and you will see USB for charging "Touch for more options"
- Select 'File Transfers'
Transfer files.
Click to expand...
Click to collapse
I don't get the pop-up, the phone really does not detect that it's connected to a computer.
Isayaa said:
I don't get the pop-up, the phone really does not detect that it's connected to a computer.
Click to expand...
Click to collapse
That sounds like a hardware problem.
I don't have developer USB debugging mode on or anything.
I have this issue with my op3. Just got it in the post today. My windows 10 pc bleeps when pugged in but does not load a drive. In device manager it shows up as the d drive but not in file explorer. Annoying!
My windows 7 (company laptop) recognised my phone first time and installed the drivers no problem. I had problems with my USB flash drive earlier today until I discovered the hidden enable OTG toggle.
Sent from my ONEPLUS A3003 using Tapatalk
Isayaa said:
Hello everybody,
I received my OP3 yesterday and I'm quite happy with my phone, but I'm having an worrying problem with the USB connection. Indeed, I cannot seem to get the USB connection working in MTP mode. In fact, I cannot get anything else working than charging mode.
Things I already tried :
- Enabling USB debugging
- 3 different cables (OP2, OP3, no brand)
- Manually choosing MTP mode in developper options
- 2 different computers
Maybe the most worrying thing is that the Windows device manager doesn't see any device when I connect the phone, not even a device with an error...
I'm really starting to think this is a hardware problem
Please, HELP ! :crying:
Click to expand...
Click to collapse
I had the same problem.
What I did to fix it was the following steps:
- Disable USB debugging in developer options
- Choose PTP mode in developer options
- Choose MTP mode in developer options
- And Done, my PC now recognize the phone in MTP mode
what i do to fix this
- disable OEM unlocking
- disable developer options
- plug USB (wait for drivers install)
- enable developer options
- enable USB debuging
Gah, having similar problems!
Have tried all the workarounds suggested here, but whenever I plug it in on MTP mode it just shows me the OnePlus Drivers CD Drive.
I have installed the drivers (multiple times) but Windows 10 just won't see the phone when I plug it on MTP mode, just shows me the Drivers CD Drive every single time.
It's recognised as PTP no problems, but no luck on MTP!
Any ideas?
(Unlocked, not yet rooted, on stock firmware)
op3
Hi, i have the same problem, has anyone found any solution for this? It's starting to get pretty irritating... :/
Are you sure youre choosing file transfer mode from the notification area where by default its selected as charging only.
Try this
Hi Guys,
Try halfway inserting the USB cable into your PC, I was having the same frustrating problem and noticed that did the trick for me.
Still trying to figure out why the connectors are not responding when the USB cable is fully inserted, I admit that this is my first device using USB Type-C.
strange
The problem is not getting any better, i simply cannot get windows to even recognise my phone in device manager. Tried it in adb and fastboot, also tried a hard reset but no solution.. I requested a repair from oneplus because i think it cannot be anything else than a hardware problem.
guys i found solution on op3 forum... it worked 4 me with win 10 enterprise... download and install update from here... https://support.microsoft.com/en-us/kb/3099229
This worked fo me: (i'm using Win10)
Device manager, and find "MTP device" then driver update, find on computer, and select MTP USB Composit Device. It works with enabled Debugging, OEM unlock is on too. :good:
white43 said:
When you connect the phone, Marshmallow by default connects in charging mode.
- Swipe down and you will see USB for charging "Touch for more options"
- Select 'File Transfers'
Transfer files.
Click to expand...
Click to collapse
Solved my problem
i just have issue with my Redmi note 5 with last pie rom i just need to install drivers for win 10
and everytime i connect usb to mobile using my laptop nothing appear on mobile i get this message the usb device not recognized
how can i solve this problem please
the second issue the charging time i just charge my mobile with stok charge with around 6 hours after the new update
Try this;
1. Connect the phone with the PC.
2. Go to developer settings.
3. Switch off and on the Usb debugging.
It shall be connected now.
Reply me back if that worked for you.
Greetings first
S.A
I flashed PA10 on My Mi a2 lite and worked greet but i entered to recovery rom to check something and when i restart to system i did press on Install TWRP if isnt installed ... i got bootloop when he booted to system
i connected the phone to Mi flash but when i connect him to pc FastBoot showing " usb can't recognize "
Same when i Enter EDL MODE ( pin Test ) " usb can't recognize "
The Problem not from Cable i tryd 6 cable same problem
Help me please and sorry for prolongation & English
M3Do0 said:
Greetings first
S.A
I flashed PA10 on My Mi a2 lite and worked greet but i entered to recovery rom to check something and when i restart to system i did press on Install TWRP if isnt installed ... i got bootloop when he booted to system
i connected the phone to Mi flash but when i connect him to pc FastBoot showing " usb can't recognize "
Same when i Enter EDL MODE ( pin Test ) " usb can't recognize "
The Problem not from Cable i tryd 6 cable same problem
Help me please and sorry for prolongation & English
Click to expand...
Click to collapse
reinstall the drivers ,provided with MiFlash ,if the problem presists ,change the usb to another on your pc
nikoman1987 said:
reinstall the drivers ,provided with MiFlash ,if the problem presists ,change the usb to another on your pc
Click to expand...
Click to collapse
Still Dont work 3 computer and 1 PC Cafe same problem
the last usb device you connected to this computer malfunctioned and windows does not recognize it
Help please i got this MSG from / Fast boot / EDL
M3Do0 said:
Still Dont work 3 computer and 1 PC Cafe same problem
the last usb device you connected to this computer malfunctioned and windows does not recognize it
Help please i got this MSG from / Fast boot / EDL
Click to expand...
Click to collapse
sorry ,never faced that kind of issue ,try installing different drivers ,because if the device malfunctioning ,then driver issue or hardware...
Hello
Hope someone can help I cannot find a definitive answer hopefully in layman's terms for this problem.
Redmi Note 8 Pro Bergonia 6gb ram 128gb storage Miui 12 Global
Tried CFW 2020 Anti-Brick Corvus ....., Afterwards Phone booted then went completely dead apart from power light when connected to usb
Came accross SP Flash Tool this did help, phone now boots, all seems ok apart from when in fastboot when connecting usb to PC/laptop (tried several cables with a PC and laptop using USB 2.0 all worked prior to trying CFW) all with same result phone stays in fasboot for approx 20 seconds then reboots. Don't know if this is relevant, if I put the phone into fastboot and do not connect to usb, fastboot remains on. Is there anyway I can install twrp and root, or am I stuffed?
Thanks
Smokes
Smokes68 said:
Hello
Hope someone can help I cannot find a definitive answer hopefully in layman's terms for this problem.
Redmi Note 8 Pro Bergonia 6gb ram 128gb storage Miui 12 Global
Tried CFW 2020 Anti-Brick Corvus ....., Afterwards Phone booted then went completely dead apart from power light when connected to usb
Came accross SP Flash Tool this did help, phone now boots, all seems ok apart from when in fastboot when connecting usb to PC/laptop (tried several cables with a PC and laptop using USB 2.0 all worked prior to trying CFW) all with same result phone stays in fasboot for approx 20 seconds then reboots. Don't know if this is relevant, if I put the phone into fastboot and do not connect to usb, fastboot remains on. Is there anyway I can install twrp and root, or am I stuffed?
Thanks
Smokes
Click to expand...
Click to collapse
1/Try flash with Miflashtool
2/Try unbrick hardbrick method. You can find on many: Youtube, Telegram, Github, XDA,... Keep phone in EDL mode by bypass and flash by Sp flash tool.
Thank you SP flash tool and a newer driver fixed it.
Use USB 2.0 ports. (use usb 2.0 hubs if you dont have usb 2.0 ports)
Install drivers properly (it should say Android Bootloader Interface in Device Manager)