Hello, I have bricked my S8500. I can go to the download menu. The problem is that I can't install properly USB drivers , or maybe it is USB cable that is wrong, the USB cable is from nokia and model is : CA101. Even when the phone was working ok computer couldn't see my wave , and I don't know why... So the problem is that when I go to the Download menu my computer detects all the drivers and everything is alright... And when I hit download I get this.
Download Start Ch[0]
BootLoader 1703.9KB OK[0.7s]
Dbl 281.5KB OK[0.8s]
Wait reset !!
Serial port detect error!
And after Wait reset my computer just didn't recognize my phone anymore, and that's why it has been bricked at the begining. Could anyone please help me? I tried different USB drivers, different PC. Nothing helps :{{{ Please guys, help me.
Maybe it is because my USB cable isn't from original wave, or no?
Nipit said:
Hello, I have bricked my S8500. I can go to the download menu. The problem is that I can't install properly USB drivers , or maybe it is USB cable that is wrong, the USB cable is from nokia and model is : CA101. Even when the phone was working ok computer couldn't see my wave , and I don't know why... So the problem is that when I go to the Download menu my computer detects all the drivers and everything is alright... And when I hit download I get this.
Download Start Ch[0]
BootLoader 1703.9KB OK[0.7s]
Dbl 281.5KB OK[0.8s]
Wait reset !!
Serial port detect error!
And after Wait reset my computer just didn't recognize my phone anymore, and that's why it has been bricked at the begining. Could anyone please help me? I tried different USB drivers, different PC. Nothing helps :{{{ Please guys, help me.
Maybe it is because my USB cable isn't from original wave, or no?
Click to expand...
Click to collapse
I too use Nokia table to flash my samsung wave. If your phone was able to connect to Kies prior to flashing there should be no issues.
When you flash for 1st time you always get that error. Pls try once again and you shd not face any issues.
Datta
No, I wasn't able to connect to kies. I got a USB cable from original xperia x10, still same issue... Can someone tell me what to do? I downloaded a lot of drivers, but maybe there is some special driver? :/
The problem usually goes away for me when flashing from a freshly booted pc, so try restarting one of your computers for flashing and try again.
Have done that too... Any advice? :/
Hello!
First kill all Kies Processes (in the Task Manager)
Second launch Multiloader and try to flash
When it says Serial Error, just do Port Search again, and it should work
That's what I did when I had my Serial Port error ^^
Hope I helped you
Download Start Ch[0]
BootLoader 1703.9KB OK[0.7s]
Dbl 281.5KB OK[0.8s]
Wait reset !!
Serial port detect error!
---------------------------------------------
Just after this message, without quit Multiloader:
Phone on DOWNLOAD MODE try this:
Uncheck Boot, unplug USB Cable from Phone and Plug it again, You will see Download actived in Multiloader, Just clic on DOWNLOAD. And your Flashing will be continued....
----------------------------------------------
Sory For my english.
Still the same **** :{{{ Anymore advices guys?
Darkminus said:
Hello!
First kill all Kies Processes (in the Task Manager)
Second launch Multiloader and try to flash
When it says Serial Error, just do Port Search again, and it should work
That's what I did when I had my Serial Port error ^^
Hope I helped you
Click to expand...
Click to collapse
You didn't understand me very well. The problem is that when I hit download my computer suddenly loses USB connection and shows my phone as unknown device, that is the problem why I bricked my phone. Do anyone knows how to make my pc see my samsung wave?
Nipit said:
Download Start Ch[0]
BootLoader 1703.9KB OK[0.7s]
Dbl 281.5KB OK[0.8s]
Wait reset !!
Serial port detect error!
Click to expand...
Click to collapse
Same thing happened to me. After this, you shouldn't disconnect you wave, but to wait, and click search port again. If there is no port again, tru with different multiloader (mine was v5.65), and there is again same problem, try with another computer with preinstalled USB drivers.
The good thing is that your phone still enters boot mode. If it wasn't the case, then it would be a total brick.
Best regards
Nipit said:
You didn't understand me very well. The problem is that when I hit download my computer suddenly loses USB connection and shows my phone as unknown device, that is the problem why I bricked my phone. Do anyone knows how to make my pc see my samsung wave?
Click to expand...
Click to collapse
No, you didn't understand this flashing process. Most important thing here is to avoid interrupting of connection between computer and phone, even in serial port error. You need to search port again, or to change things that I mentioned above.
You hit download, then bootloader is loaded. It is absolutely normal in this algorithym to reset phone (wait reset). Then our error appears in port error. That is the time when you should click port search again, and when it finds it again (it will) click download button. Thats how it was in my case already 4 times.. Hope I helped.
Best regards
I have told that I reinstalled a lot of drivers and tried different PC's, nothing helps. I tried about 3 or 4 versions of multiloader still same result :/ I don't know what to do anymore... Please any advices? Maybe someone had the same issue?
I don't really know what happened. We switched our cables with my friend again, and I tried to flash with Nokia cable. And everything went okay for the 1 time. No errors, no nothing, no Unknown USB device problem. This is really strange. Thank you for you help friends :}
datta.ca said:
I too use Nokia table to flash my samsung wave. If your phone was able to connect to Kies prior to flashing there should be no issues.
When you flash for 1st time you always get that error. Pls try once again and you shd not face any issues.
Datta
Click to expand...
Click to collapse
i have bricked my s5330 please help
no download mode or even recoverymode please help
I got the same problem too. Windows detects it as Unknown device.
Anyway to fix it? :crying:
[email protected] said:
I got the same problem too. Windows detects it as Unknown device.
Anyway to fix it? :crying:
Click to expand...
Click to collapse
Try to install driver manually from windows driver menu
Just installed "S8500-Driver-V5_02_0_0" now it's working since I wanted to flashback my friend's Wave from Bada2 to v1
Hi everyone , this is second time happening , first I forgot my pin , now my brother tried to unlock the phone ,I had screen lock with pattern , and he failed 5 times , now it says to give the gmail and password , I am doing that , and doing it right, because I can login in computer @ gmail but cannot in device , at forgot pattern option , it says incorrect email or password, even tho im doing it right. How is that possible, maybe because its not connected in internet , wifi or internet-through-pc . Can't recovery with volumedown button because volume buttons dont work.
P.S : USB Debugging is enabled on phone.
I have tried earlier when I forgot my pin , with ADB method but seems that ADB cannot recognize my device or I dont know what .
Any solution as soon as possible please Why it says incorrect email/password when Im doing it right ...
Windows version??
If you're using W8 try another pc running W7 or xp in order to use adb commands (install drivers first)
Shutdown the phone
Plug it (it will be recognized)
Then open cmd and write: adb reboot recovery
Maybe it don't works at first, try several times
Once in recovery, full wipe and flash a Rom
Enviado desde mi Nexus 4
pascuals said:
Windows version??
If you're using W8 try another pc running W7 or xp in order to use adb commands (install drivers first)
Shutdown the phone
Plug it (it will be recognized)
Then open cmd and write: adb reboot recovery
Maybe it don't works at first, try several times
Once in recovery, full wipe and flash a Rom
Enviado desde mi Nexus 4
Click to expand...
Click to collapse
Problem solved with factory reset thanks , but I dont still know why Windows doesnt recognize my phone , I want to install a CUSTOM ROM and windows doesnt recognize, im a noob at developement and cant install a custom rom
Hello guys!
Today i make a big mistake. I want to install CM 14 to my LG g3 . At first i can't go into TWRP . After 1 hour a somehow managed to boot in twrp but after formating the old os the phone is not responsing at all.
Things that i try:
I try to install a bootloader with ADB but the my pc cant recognise the device.
Things that the phone does:
There is no boot screen all it does is led and blue LED is blinking.
If i connect to the pc it recognise it as "Android " but i cant do nothing with it.
Please help me. Thank you
Did you try to connect in download mode and flash stock firmware with the official toolkit? I don't remember it's name though
Balino said:
Did you try to connect in download mode and flash stock firmware with the official toolkit? I don't remember it's name though
Click to expand...
Click to collapse
Yes of course but the pc diden't recognise the phone and it say its " not cot connected"
You need to install device drivers and ADB drivers before trying. Use USB 2.0 ports too, it's acting wired with 3.0 ones
Last time i flashed ThE stock ROM via mi flash tool i lost energy on my pc so prosess ended un error. My phone was in fastboot but i rebooted and never turns on again. I cant get fastboot mide anymore. Adb not recognice it but i can see it on PC in device mánager as "gualcomm HS-USB diagnostics 900E (COM3)
Any help?
MaxxTwo said:
Last time i flashed ThE stock ROM via mi flash tool i lost energy on my pc so prosess ended un error. My phone was in fastboot but i rebooted and never turns on again. I cant get fastboot mide anymore. Adb not recognice it but i can see it on PC in device mánager as "gualcomm HS-USB diagnostics 900E (COM3)
Any help?[/QUOTE
Just go to fastboot mode and type: "fastboot oem edl"
If you can´t enter fastboot, you have to open your phone and connect both testpoints
it's all on xda questions and anwsers mi A2 lite
Click to expand...
Click to collapse
Nxkealen said:
MaxxTwo said:
Last time i flashed ThE stock ROM via mi flash tool i lost energy on my pc so prosess ended un error. My phone was in fastboot but i rebooted and never turns on again. I cant get fastboot mide anymore. Adb not recognice it but i can see it on PC in device mánager as "gualcomm HS-USB diagnostics 900E (COM3)
Any help?[/QUOTE
Just go to fastboot mode and type: "fastboot oem edl"
If you can´t enter fastboot, you have to open your phone and connect both testpoints
it's all on xda questions and anwsers mi A2 lite
Click to expand...
Click to collapse
Thanks! But its in indi, can not undetstand nothing XD
Click to expand...
Click to collapse
https://redirect.viglink.com/?key=e...ter-t3862648/amp/&ref=https://www.google.com/
1- install mi flash tool and Qualcomm driver on your Pc
2- open the phone (just remove the battery connector )
3-plug a USB cable in the device
4- short the jtag pins(you can find their location in this page www mobilerdx com/2018/09/xiaomi-redmi-6-pro-test-point-boot-into-edl-9008-mode.html
7-plug the USB cable in the Pc while shortening the pins
If you do these steps mi flash tool should reconize your device and you will be able to flash it
Thanks man! My phone is working properly again. Let me tell my story in this.
Never opened a device before this. So I decided to take it to the official service. Unfortunately they told me that the mother board was damaged and the cost to REPLACE it is the same as buy a new phone!
So I been forced to try fix it by my self.
A couple of latex gloves XD and don't ask how I did to short the points but it works...
Now I'm using my Daisy again and waiting for official Android Q !!!
When i try to enter fastboot i am not getting the logo but just the word "fastboot". My poco f3 works perfectly but will not enter the fastboot mode with the logo. When i connect to the pc it is not recognised in this mode. I would be grateful if anyone can advise how to get it back to normal.
pipin18 said:
When i try to enter fastboot i am not getting the logo but just the word "fastboot". My poco f3 works perfectly but will not enter the fastboot mode with the logo. When i connect to the pc it is not recognised in this mode. I would be grateful if anyone can advise how to get it back to normal.
Click to expand...
Click to collapse
New fastboot logo is the orange FASTBOOT word. So it is already normal. If it's not recognized it may be a problem with drivers, usb cable, debug authorization/permissions.
pipin18 said:
When i try to enter fastboot i am not getting the logo but just the word "fastboot". My poco f3 works perfectly but will not enter the fastboot mode with the logo. When i connect to the pc it is not recognised in this mode. I would be grateful if anyone can advise how to get it back to normal.
Click to expand...
Click to collapse
Hi,
I have had my F3 for 13 months and Fastboot and windows can still be temperamental, my PC has 10+ usb sockets.
As bozinsky73 Suggested installing the correct drivers and maybe a different USB-C lead might help, you could try running MiFlash and then select the drivers tab and then Install, as some XDA users have had success with this.
I have tried 3 different (Aliexpress) Silicone coated leads and these cause my PC to flag up "unknown device" when in FASTBOOT, i also have 2 leads that look like the most cheapest ones out there and these work OK, even thou some times i still have to switch to another USB socket on my PC.
I run 3 different versions of windows on 3 different partitions that run, Win 7, Win 10 and Win 11 and i am still faced with the same issue regardless of the windows version.
I hope you sort it.
Thanks for the replies and solved it with a new cable. I was using the cable that came with the phone but obviously must have damage somewhere. Thanks anyway.