Develop Bugs

Fastboot-unbrick your device with 'no display'

How to USE FASTBOOT commands in case your Device got Soft-Bricked with NO DISPLAY
Click to expand...
Click to collapse
Let's describe Softbrik:-Anything caused to your phone except damage to Hardware of your phone which put your Device into a state where it is not booting up and kept showing White, Gray, Blue or Black Screen or Either It gets stuck at Company logo Screen. This may occur if something goes wrong during Rooting, flashing Recovery or ROMs or during Updating in Recovery Mode or either being caught by some wrong software or VIRUS !!!
Preface to the Guide:
Fastboot is a command line tool used to directly flash the filesystem in Android devices from a host computer via USB. It allows flashing of unsigned partition images and also can erase partitions. Its a part of Android Developement Kit (Android SDK).
Use of FASTBOOT is disabled in production devices since USB support has been disabled in the bootloader. You must have an Engineering SPL, or an SPL that is S-OFF or Unlocked bootloader to use 'fastboot'.
After installing the Android SDK or ADB Standalone you can use 'fastboot' in addition to the more common ADB.
One can use the attached .android folder if u want to skip downloading Android SDK. (Refer Attachment)
Verify SPL S-OFF or Bootloader Unlocked:
Not required for Micromax !! But certain Production Devices like Sony HTC LG etc may need bootloader to be unlocked before carrying out this process. My simple advice to people is.. "If you enjoy experiments on your device, you must be ROOTED and to ROOT you device you may need to have unlock bootloader"
Preparations:
(1) Download attached .android.zip, Extract and place .androidfolder on C:/ drive of your PC. So the path of this folder will look likeC:/.android
(Never remove this ".android" folder from C:/ coz you will require it whenever u want to experiment with you Droid using ADB or FASTBOOT methods. I assure... You can do a lot more with it; if you really explore how to use various commands !!!)
.android folder is containing adb.exe, fastboot.exe and related drivers adb_usb.ini, android_winusb.ini AdbWinApi.dll and AdbWinUsbApi.dll and other files; all together not more than 800KB
(2) Connect Device in 'USB debugging ON' mode.
Ensure Drivers for your Device are already installed on the host computer
Note: I recommend you should always keep USB Debugging opetion 'ON' as it only can help you, in case, your device get SoftBricked and you cant see anything on Device Screen. Remember that with USB debugging 'OFF' your Device can't communicate with your Host Computer.
(3) Host Computer Ability to Launch Command Prompt:
On Windows-XP or earlier, to start ADB (Android Debug Bridge) You need to locate your folder containing adb.exe where as Windows-7/Vista/Other-Latest-OS can directly launch command prompt from the Folder itself by Shift+Right Click on Mouse and Selecting "Open Command Prompt from here".
Hence 'Locating 'adb' folder-steps' are for XP users only, However higher OS users can skip it and can directly start giving 'adb' commands after opening cmd from .android folder.
(4) So now, Open Command Prompt (in Windows XP), it will return like this:
Code:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\USERNAME>
(As our adb.exe is in C:/.android.... we will type: Cd C:\.android)
C:\Documents and Settings\USERNAME>Cd C:\.android (Hit Enter)
C:\.android>
Let's give command to detect attached device by writing: 'adb device'. On hitting enter it will list all devices attached to your PC.
Code:
C:\.android>adb devices
List of devices attached
XXXXXXXX-XXXX device
Now u can do a lot while your Device is attached in 'adb mode' e.g.:
Code:
1. Rebooting into Bootloader (FASTBOOT)
2. Installing apps on as /system/app or /data/app
3. Copying Files to/from your SDCARD
4. Pulling Files or Apps already installed on your /system or /data partition
To Understand adb commands and how they work please read:
http://developer.android.com/tools/help/adb.html#commandsummary
Let's come back to ISSUE: "We have a SOFTBRICKED devices !!!"
(1) Booting into FASTBOOT mode:
Let's come back to'fastboot' as we need to flash new ROM or to apply update.zip in a Softbricked deviceNote: Let your device remain connected to PC and don't disconnect untill You finish you job-successfully and get your Device again in working Factory Condition.
""fastboot reboot-bootloader" This command is used to reboot your device into bootloader i.e into fastboot mode) and In this Mode your device will stuck into boot logo only and u cant operate it. ;D Well we are not concerned as we already have a bricked device with no screen display !!!. Lets go ahead...on cmd follow:
Code:
C:\.android>adb reboot-bootloader
C:\.android>fastboot devices
XXXXXXXXXXXX fastboot
(2) Unlocking-ReLocking Bootloader:
(Skip if u working with pre-unlocked devices)
C:\.android>fastboot oem unlock
...
SUCCESSFUL
finished. total time: 118.063s
Click to expand...
Click to collapse
(Accept/Decline warning on your devices screen. Select YES to Unlock)
(Once ROM is flashed) To relock Bootloader use command: fastboot oem lock:
Code:
C:\.android>fastboot oem unlock
...
SUCCESSFULL
finished. total time: 118.063s
(Accept/Decline warning on your devices screen. Select YES to ReLock)]
(Skip if u working with pre-unlocked devices)
(3)Get 'Recovery.img' and 'Update.zip' for your Device:
Lets Wipe the Data and then proceed to Flash new ROM/Update.zip
IMPORTANT: Copy the stock recovery.img and your devices' Update.zip[ in .android folder(You can get it even by searching it in this forum or by Googling for it..) So I assume that you have it....in your .android
Abbreviations:
recovery.img = Stock Recovery of your Device
Update.zip = Update Package/Stock ROM of your Device
Let's start wiping and updating process with following commands:
(4)Wiping Old Data and Flashing new Update.zip:
Code:
C:\.android>fastboot -w
SUCCESSFUL
C:\.android>fastboot update Update.zip
(Here Replace Update with Full Name of your any Update.zip that you copied to .android folder)
Your phone will update and automatically reboot into the Factory State. Cheers !!!
Note: Its important to spell the file name correctly that u want to flash/update. No space between name are allowed. This process will only be successful if your device is still carrying recovery partition 'intact'.
.....If above wiping/updating FAILS....
If you still in "No Display State", extract update.zip to .android folder (U can use 7zip).
You will find following main .img files, each incorporate specific partition on any android device. In our case we can extract following:
boot.img -The main kernel and initrd
recovery.img -A 'backup' kernel, initrd, and OS 4 sysm recovery/maintanance
sytem.img -The main OS
userdata.img -User data and settings
splash.img -Has Boot image. can be splash1 as well.
cache.img -Temp storage
...there can be similar partition names depends on your device type.... but basically these 6 partitions constitute a ROM. Copy all of (6) files to .android folder. (Henceforth, we can use this recovery.img as stock recovery for your device.)
"As your device is bricked/corrupted, we need to erase all old Partitions and flash (rewrite) new partitions that we have extracted from Update zip and placed in .android."
(1) Lets erase all partitions first (one by one)using: fastboot erase <partition>
Code:
C:\.android>fastboot erase system
Successful
C:\.android>fastboot erase recovery
Successful
C:\.android>fastboot erase boot
Successful
C:\.android>fastboot erase userdata
Successful
C:\.android>fastboot erase splash
Successful
C:\.android>fastboot erase cache
Successful
(2) Continuing with Flashing new partionsusing the Images copied in .android:
Command: fastboot flash <partition> <partition_name.img>
Code:
C:\.android>fastboot flash boot boot.img
Successful
C:\.android>fastboot flash recovery recovery.img
Successful
C:\.android>fastboot flash system system.img :(here people gen. get stuck
Successful
C:\.android>fastboot flash userdata userdata.img
Successful
C:\.android>fastboot flash splash splash.img
Successful
C:\.android>fastboot reboot
If all successful, Your phone will update and automatically reboot into the Factory State. Cheers !!!
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
..If you are Unable to flash 'system.img' successfully...
Reason: Your device is not allowing to format and rewrite 'system' partition manually. If your device is Rooted then probably such failure will never occur.
Let's overcome this Issue as well...Try Following...
First, Understand current State of Device...
We Wiped out old partitions and Flashed new partitions except :-\ system :-\ So No System on your Device at present.
What we will do now..
We will now wipe all partitions again
We will then flash only recovery.img saved in .android folder
We will use update.zip saved in .android folder to Flash it using SD Card.
We will copy update.zip on SD Card (using adb). If you can do it manually using a card reader skip step-II in below process.
Step-I: Wiping 'partitions' and Flashing 'recovery.img':Let's wipe all partitions again:
Code:
C:\.android>fastboot -w
C:\.android>fastboot reboot-bootloader
C:\.android>fastboot flash recovery recovery.img
C:\.android>reboot
Step-II: Copy update.zip on SDCARD
Code:
C:\.android>adb push update.zip /data/sdcard
Step-III: As you can't manage to see what is happening on screen(No Display) hence Don't do mistakes here, read carefully and follow exactly:
1.Reboot Device into Recovery Mode:
On cmd type:
Code:
C:\.android>adb reboot recovery
2.Now Press 'Volume(-)' button ONCE. (Once means 'once only'-if you did mistake here repeat the Step-III)
3.Press 'Power' Button TWICEand Leave you Device for some 10 Minutes time.
If phone don't get alive in 10 Minutes Repeat Step-III again.
You may not able to see but Your phone will update and automatically reboot into the Factory State. Cheers !!!
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Explaining Last Step:
We used simple logic in last procedure/ Its nothing but updating using Recovery Mode. Always remember Custom Recovery of Micromax A56/57 has following options: (May be diferent for other devics)
As the default curser in recovery UI remains on Option-1 and we needed to choose Option-2.
Hence to select "Apply update for sdcard" we pressed 'Vol(-)'ONCE and then to Confirm and execute that option Tapped 'POWER' button TWICE.
Hope this Guide helped you or ...will Help you to help others !!! ​

One quick question...
What if my device detected in fastboot but not in adb devices?
How to enter recovery or solve my softbricked issue?

RmatriX1218 said:
One quick question...
What if my device detected in fastboot but not in adb devices?
How to enter recovery or solve my softbricked issue?
Click to expand...
Click to collapse
bro if your volume + key is not working so how can u say that your device is soft bricked...
i think you should repair your volume keys and than try to move to recovery...
& one more thing without installing all drivers/thing u will not be able to access fastboot mode.....

Hey!!
Please please help me!!
I have MICROMAX a54 ninja 3.5.my mobile stuck in bootloop and soft bricked!!
When I turn on my devices it stuck in logo ninja 3.5.
I also try to go in recovery mode by pressing volume up+home key+lock key!
But it doesn't enter in recovery mod!!
Now what am I do??
Please please help me.
Thank you in advance..

I think for going in recovery:-
1. Press and hold power button.
2. While holding power key, press and hold both volume keys, (vol+ & vol-)
3. When mmx logo comes it will display a message vol(+) for recovery and vol(-) for fast boot then again press vol(+) for once,
And now your in recovery

I lost my recovery.
And I can't go into recovery mod!!
Please help me
Sent from my YU5010 using XDA Free mobile app

What do u mean by, lost your recovery???

I am not able to go to recovery!!
When I m try to gobto recovery mod it doesn't happen only logo ninja 3.5 is there
Sent from my YU5010 using XDA Free mobile app

Ok ok just try flashing your official rom
---------- Post added at 10:35 AM ---------- Previous post was at 10:17 AM ----------
Aakash mehta said:
I am not able to go to recovery!!
When I m try to gobto recovery mod it doesn't happen only logo ninja 3.5 is there
Sent from my YU5010 using XDA Free mobile app
Click to expand...
Click to collapse
Just download your official rom, Your device driver for pc, and install the rom to your device using "sp flash tool"

Please give me steps and link of above method!!!
Thank you for help me
Sent from my YU5010 using XDA Free mobile app

Aakash mehta said:
Please give me steps and link of above method!!!
Thank you for help me
Sent from my YU5010 using XDA Free mobile app
Click to expand...
Click to collapse
1.First download your stock recovery for your mmx a54 from here http://d-h.st/D7G
2. Now download sp flash tool from here https://drive.google.com/file/d/0B9S_ERLSMngHVE9Qc25ObGU1UU0/edit?pli=1 install it to your pc.
3. Download drivers for a54 from here singledrivers.blogspot.in/2013/12/micromax-ninja-a54-usb-driver-for.html?m=1 install the driver to your pc.
4. Download your phone stock rom from here http://d-h.st/fg2 place it in your external sd card(mmc) of your device.
5. Download scatter file from here www.mediafire.com/view/rvz1c5tiifx7yck/MT6575_Android_scatter.txt
6. Now run sp flash tool in your pc, browse to the scatter file.txt, turn off your phone remove the battery and connect it through usb to your pc. (Connect the device without battery)
7. Now select the recovery tab in sp flash tool browse to the recovery.img file (Which we hv downloaded before). Now select the option download in sp flash tool it will Start flashing your stock recovery to the device, A green tick marked will be comes as the flashing complete, now remove your device from pc.
8. Now goto recovery by vol key combination.
9. Now select apply update from sd card and select the stock rom.zip file
10. When flashing done then, Wipe Cache Partition and factory data reset of your device.
Now just select reboot device now it will take around 10min to boot for the first time so wait. Hope this helps you

Thank you for giving me whole information!!
Sent from my YU5010 using XDA Free mobile app

Aakash mehta said:
Thank you for giving me whole information!!
Sent from my YU5010 using XDA Free mobile app
Click to expand...
Click to collapse
Don't say thanks my Buddy just press thanks button.

Hello
I tried sp tool flasher!!
I followed all steps which were given by you!!
BT although not any change in my mobile..
When I tick recovery and then browse recovery.img file and click download button but nothing had happened..
It didn't detect my mobile and didn't go for procedure!!
So now what am I do???
You helped me very much!!
Bu please further help me...
Sent from my YU5010 using XDA Free mobile app

Hv u installed driver properly, just trust me try different usb ports

Yeah i installed drivers properly!!!
Sent from my YU5010 using XDA Free mobile app

So your device is not recognizing by sp flash tool r8

I think so
Sent from my YU5010 using XDA Free mobile app

micromax a210
I have a problem with fastboot stuck on system erasing on adb fastboot mood also userdata and cache only flash recovery and boot img sp flash not working with this phone I do other mtk android with sp tool successfully what I do

What if the device is recongised in adb as : (device name) recovery, but can't actually boot into recovery (twrp) and thus when entering the command : adb reboot fastboot it can never actually boot into fastboot ?
Are there any adb commands that can do the trick or is it game over ?

Total Nub's guide to rooting Qmobile Q Infinity & Micromax Canvas Inifinity

After failing some 1-click rooting methods, for the first time I tried to do it the hard way.
That turned out to be a pretty easy way thanks to some handy links to drivers and other files I found.
Infinity thanks to the thread I found platform-tools from and the website called "getdroidtips" for the Custom TWRP for the HS2.
NOTE: THIS GUIDE WILL WIPE YOUR DEVICE SO BE PREPARED
Standard warning: FOLLOW THIS GUIDE AT YOUR OWN RISK. REMEMBER, AS PER MY NAME I AM A TOTAL NUB. I DO NOT TAKE RESPONSIBILITY FOR YOUR PHONE MALFUNCTIONING, BRICKING, BLOWING UP OR DROWNING IN COOKING OIL (rip my Elephone S7)
Pastebin code for missing links: F2RGqM1A
1) Preparation
Download the latest Flashable.Zip from [ ]
Place SuperSu.zip in your sd card or internal storage
Enable Developer Options by going to Settings -> "About Phone" -> Click "Software Version" 7-8 times
Go to developer Options in Settings
Enable OEM Unlocking
Enable USB Debugging
Shutdown your phone by holding the power button
Boot into fastboot by holding the Volume Up key + Power Button
Press Volume Down key to get into fastboot
2) On your Windows PC:
Download the file from [ ] and extract the platform-tools folder (I extract to "D:\Downloads" in this example)
Download the Custom TWRP from [ ] and place it inside the platform-tools folder
Connect your device to your computer
press Win+R, type cmd and press enter
2.1) (not always needed)
If your device won't connect or the steps below don't work, try updating drivers:
Connect your phone while it's in fastboot
open start menu, search and open Device Manager
check inside Portable Devices or Android Devices for your phone's name
or look for Android Bootloader Interface
if it's not there, it might be named something else, with an icon that has a yellow triangle inside it.
Right click it, Update Driver
> Browse my computer for driver software
> Let me pick from a list of available drivers on my computer
> select Android Bootloader Interface
to check if you are connected, type "fastboot devices" in cmd and you'll see a device code
3) Unlocking Bootloader
In cmd, enter the following commands:
Code:
D:
cd D:\Downloads\platform-tools
fastboot oem unlock-go
THIS STEP WILL WIPE YOUR DEVICE DATA
wait for restart
4) Booting into TWRP
Go to device Settings again and ensure OEM Unlocking and USB Debugging are still Enabled. Reboot into fastboot.
In cmd:
Code:
fastboot boot twrp-3.1.1-0-20171128-UNOFFICIAL-HS2.img
(In case above cmd line doesn't work, type "fastboot boot twrp" and press Tab)
5) Backing up your rom and data (Optional but recommended)
Inside TWRP, Click Backup, tick everything, select desired directory and swipe to backup.
Reboot and follow step 5 again if needed
6) Installing SuperSU with root privileges
Inside TWRP, Click Install and select SuperSU.zip
Swipe to install and reboot
Enjoy

Please port miui 9 or lineage os 15 for micromax canvas infinity hs2

NubbyMcNubNub said:
After failing some 1-click rooting methods, for the first time I tried to do it the hard way.
That turned out to be a pretty easy way thanks to some handy links to drivers and other files I found.
Infinity thanks to the thread I found platform-tools from and the website called "getdroidtips" for the Custom TWRP for the HS2.
NOTE: THIS GUIDE WILL WIPE YOUR DEVICE SO BE PREPARED
Standard warning: FOLLOW THIS GUIDE AT YOUR OWN RISK. REMEMBER, AS PER MY NAME I AM A TOTAL NUB. I DO NOT TAKE RESPONSIBILITY FOR YOUR PHONE MALFUNCTIONING, BRICKING, BLOWING UP OR DROWNING IN COOKING OIL (rip my Elephone S7)
Pastebin code for missing links: F2RGqM1A
1) Preparation
Download the latest Flashable.Zip from [ ]
Place SuperSu.zip in your sd card or internal storage
Enable Developer Options by going to Settings -> "About Phone" -> Click "Software Version" 7-8 times
Go to developer Options in Settings
Enable OEM Unlocking
Enable USB Debugging
Shutdown your phone by holding the power button
Boot into fastboot by holding the Volume Up key + Power Button
Press Volume Down key to get into fastboot
2) On your Windows PC:
Download the file from [ ] and extract the platform-tools folder (I extract to "D:\Downloads" in this example)
Download the Custom TWRP from [ ] and place it inside the platform-tools folder
Connect your device to your computer
press Win+R, type cmd and press enter
2.1) (not always needed)
If your device won't connect or the steps below don't work, try updating drivers:
Connect your phone while it's in fastboot
open start menu, search and open Device Manager
check inside Portable Devices or Android Devices for your phone's name
or look for Android Bootloader Interface
if it's not there, it might be named something else, with an icon that has a yellow triangle inside it.
Right click it, Update Driver
> Browse my computer for driver software
> Let me pick from a list of available drivers on my computer
> select Android Bootloader Interface
to check if you are connected, type "fastboot devices" in cmd and you'll see a device code
3) Unlocking Bootloader
In cmd, enter the following commands:
THIS STEP WILL WIPE YOUR DEVICE DATA
wait for restart
4) Booting into TWRP
Go to device Settings again and ensure OEM Unlocking and USB Debugging are still Enabled. Reboot into fastboot.
In cmd:
(In case above cmd line doesn't work, type "fastboot boot twrp" and press Tab)
5) Backing up your rom and data (Optional but recommended)
Inside TWRP, Click Backup, tick everything, select desired directory and swipe to backup.
Reboot and follow step 5 again if needed
6) Installing SuperSU with root privileges
Inside TWRP, Click Install and select SuperSU.zip
Swipe to install and reboot
Enjoy
Click to expand...
Click to collapse
Hi please help me, after flashing recovery my phone is on bootloop now, what do i do

Hem97 said:
Please port miui 9 or lineage os 15 for micromax canvas infinity hs2
Click to expand...
Click to collapse
I wish I could.
Sudhangshu said:
Hi please help me, after flashing recovery my phone is on bootloop now, what do i do
Click to expand...
Click to collapse
Did you try "flashboot boot twrp..." like in my guide or "flashboot flash twrp..."?
And which twrp image did you use?
In any case, if you can still get to the fastboot screen, try booting with the twrp image in Step 4 above (download links in the pastebin link)

NubbyMcNubNub said:
I wish I could.
Did you try "flashboot boot twrp..." like in my guide or "flashboot flash twrp..."?
And which twrp image did you use?
In any case, if you can still get to the fastboot screen, try booting with the twrp image in Step 4 above (download links in the pastebin link)
Click to expand...
Click to collapse
Hi, "flashboot boot twrp" wasnt working at all, so i tried "flashboot flash twrp" and all i have is a bootloop. So after flashing recoveru i booted my phone to fastboot and run the command, " flashboot boot recovery recovery.img" where recovery is the custom recovery image and it booted into recovery. Then there is one more step to do that allowed me to finally boot into my os. Its working fine and i still have twrp installed on my phone
---------- Post added at 06:53 PM ---------- Previous post was at 06:49 PM ----------
NubbyMcNubNub said:
I wish I could.
Did you try "flashboot boot twrp..." like in my guide or "flashboot flash twrp..."?
And which twrp image did you use?
In any case, if you can still get to the fastboot screen, try booting with the twrp image in Step 4 above (download links in the pastebin link)
Click to expand...
Click to collapse
Btw i dont find any pastebin links, im sorry im just a noob too..... Lol

Want custom rom for Qmobile Qinfinity
I want a custom rom for Qmobile Qinfinity.
Because its own rom lags and does not have full features. Please give the rom like lineage os,RR,Or Stock
Please Help?:good:

hi bro,recently i just buy a new phone which is micromax canvas infinity.i have rooted my phone successfully,but there are no custom roms available for this phone.can you develop any custom rom for this phone?that will be very helpful...

Custom recovery TWRP for Infocus bingo 21 m430

Working TWRP custom recovery for infocus m430 bingo 21.
To do this, you would require:
data cable if not rooted phone
stock marshmallow running infocus m430 bingo 21
if not rooted, you need adb and fastboot installed on your computer-> google this if never heard of.
download attachments of this post(twrp_recoveryimg)
Problems:
Before you do this, you need to know the temporary problems you would encounter and their solutions
TWRP is in other language but you can use this link to bring it back to english, 1 time thing
http://www.teamandroid.com/2017/04/30/change-twrp-recovery-language-english/
if the above link does not work out, there are lot of youtube videos to enable english in twrp. google out.
once mobile boots into recovery, it will not come back to normal. There is a bit being set by infocus on some partition to reboot to recovery always. Until i find it, you would have to use following the process below to come back to normal boot.
Steps to come back to normal boot
1. in recovery, select option advanced
2. select adb sideload option
3. swipe to start sideload(this will start adb in recovery mode)
4. cancel
5. in your computer type
Code:
adb reboot bootloader
6. After mobile shows fastboot mode: in top of the screen with infocus logo type the below command
Code:
fastboot continue
7. This should boot your device back to normal android boot.
8. You have to do this every time you boot to recovery.
Now follow the below procedures to get a custom recovery on your mobile.
Procedure 1 : (does not require root)
unlock developer options -> google this if you never knew this until now.
unlock oem. Do this by going to developer options -> oem unlocking(enable).
unzip the recovery image attachment
enter fastboot by typing following command.
Code:
adb reboot bootloader.
flash twrp_recovery.img in the attachement. Do this by using following commands.(place your twrp_recovery.img in the current directory of terminal / cmd)
Code:
fastboot erase recovery
fastboot flash recovery twrp_recovery.img
Procedure 2 : (requires root) I have not tried this but it would work. Try it on your own risk.
Download the attachments
send them to your mobile sdcard
install mobile uncle tools or similar app from play store which would flash recovery images
select install recovery and point to the twrp_recovery.img in your sdcard.
Message me in case of questions or reply this thread.

Sir,where to type the code 'adb reboot bootloader' and other codes?

Want your contact number, for the purpose of custom recovery.
I tried that steps many times on my phone via pc. So help me for the custom recovery. I want your contact number to do this process correctly without worrying any problem occurs on my phone.

You should be able to find youtube video on how to install adb and fastboot online. After that, you should type those commands in command prompt in windows computer if you have or in terminal if you have linux or mac.
[email protected] said:
Sir,where to type the code 'adb reboot bootloader' and other codes?
Click to expand...
Click to collapse

Gimme your whatsapp or telegram number, i should be able to reach you out.
iyyappan001 said:
I tried that steps many times on my phone via pc. So help me for the custom recovery. I want your contact number to do this process correctly without worrying any problem occurs on my phone.
Click to expand...
Click to collapse

Problem while using adb fastboot method in In focus M425
What about infocus M425 phone ????

Accidentally removed OS in OP3.

Hi all,
While trying to install custom mod i accidentally deleted my original rom as well as the custom rom from my phone. I can access twrp fast boot but while trying to install zip file its missing from phone. Any way to install any custom rom at this point?
Update : Restarted my phone ( well powered off coz of low battery) . When i charged and switched it on , twrp is not there . Instead when i go to recovery mode , the original one plus recovery mode is appearing.

gamer361 said:
Hi all,
While trying to install custom mod i accidentally deleted my original rom as well as the custom rom from my phone. I can access twrp fast boot but while trying to install zip file its missing from phone. Any way to install any custom rom at this point?
Click to expand...
Click to collapse
Sideloading is the easiest option.
Boot into TWRP, find ADB Sideload mode (I think it's under "Advanced", not sure), connect phone to PC via USB cable and flash ROM directly from PC with "adb sideload rom-name" command.
This is a very short version, if you need me to explain anything in depth just say it
Sent from my OnePlus 3 using Tapatalk

Explorer23 said:
Sideloading is the easiest option.
Boot into TWRP, find ADB Sideload mode (I think it's under "Advanced", not sure), connect phone to PC via USB cable and flash ROM directly from PC with "adb sideload rom-name" command.
This is a very short version, if you need me to explain anything in depth just say it
Sent from my OnePlus 3 using Tapatalk
Click to expand...
Click to collapse
if possible please tell me step by step.

gamer361 said:
if possible please tell me step by step.
Click to expand...
Click to collapse
Sorry for late reply.
So, first things first, make sure you have working adb/fastboot on your PC (you can get it >>HERE<< if you need it; select Y for all options).
- download latest TWRP recovery >>HERE<<
- download a ROM of your choice
- in case you go for a custom ROM you'll probably also need latest firmware (CLICK), Gapps (CLICK) and possibly Magisk (CLICK)
- open command prompt in folder where you've put all downloaded files - hold Shift and right click in that folder > open command window here.
- boot phone into fastboot mode and connect it to PC
- type fastboot devices in cmd to see if the phone is properly recognized (should say something like "device #serial-number" IIRC)
- flash TWRP by typing fastboot flash recovery recovery-name.img
- reboot device into recovery mode. Fastboot generally doesn't support rebooting into recovery, but our phone makes it easy with that 5 second timeout on boot. Type fastboot reboot and as soon as it displays that warning screen press a volume button and then scroll to recovery with volumpe up/down.
You should be booted into TWRP now. Let's continue to flashing a ROM.
Assuming you're going for a custom ROM, start with firmware:
- select "Advanced" in TWRP
- select "ADB Sideload"
- swipe to start sideload
- type adb devices in cmd - it should recognize that the device is in sideload mode
- type adb sideload firmware.zip and wait for it to finish
- go back to main TWRP screen and repeat the steps to get into sideload mode
- type adb sideload rom-filename.zip
- repeat to flash Gapps and Magisk
If you chose to flash stock ROM rather than custom then you can skip firmware and Gapps and flash just the ROM (and possibly magisk, that's up to you).
Done! Now you can boot into system.

Oppo A83 [CPH1729] TWRP RECOVERY

⚠Warning: This is not official TWRP, use it at your own risk!!!
Data will be erased. Back up if neccessary
This device is kind of weird so to flash twrp you need these things:
1. Prepare materials​
Install driver so as to have access to preloader (Just install automatically and no need to do anything in device manager)
This software to access to preloader -> fastboot (fastboot is somehow not available via adb methods) Enter fastboot
This tool for flashing
2. Unlock bootloader (need testpoint, python, git (optional) - you can search on google)​
Use this tool - go to this section. Follow guides to unlock bootloader (remember to use testpoint not hardware buttons)
3. Enter fastboot mode​
Use latest MTK META Ultility tool
Select Reboot Fastboot Mode in BRom section
Hold volume down button. While holding connect it to your computer
*Now your phone is in fastboot mode​4. Flash​
Open platform-tools folder in Downloads folder
Shift + Right click then "open command window here"
Input these commands into cmd
fastboot flash boot drag twrp file to cmd
fastboot flash recovery drag twrp file to cmd.
fastboot reboot. Swipe to allow modification in twrp (to make sure that stockboot wont replace twrp). After that reboot to recovery to make it installed on your device permanently.
Now your recovery is ready to flash file you can push stock image file to your root folder using adb command: "adb push. Drag the stock image file. /" (Because Decryption right now doesnt work on my device yet)
Enjoy
*Sounds crazy but it is required to make sure twrp is installed correctly​*If successful, when you power on, you will get a red section on top of your device. If you want to recover to stock recovery, flash the recovery.img below.​*Also, if you want to make your own twrp, you can try recovery.img below.​
Also thanks SebaUbuntu and Mofadal El-Tayeb (مُفَضَّل) for awesome apps
​
​​
​

Here is the PBRB version for this device

Hey I'm stuck in the third step.can you please help me?

Sorry for late reply. What problems do you have?

Is this the stock boot image you provided?

SAMIUL ISLAM 0 said:
Is this the stock boot image you provided?
Click to expand...
Click to collapse
Yes it is. I took it from OTA update

Hey friends
I want to upgrade my oppo a 83 fone to a costum rom to upgrade my androide to android 8 or higher

mahmoud2503 said:
Hey friends
I want to upgrade my oppo a 83 fone to a costum rom to upgrade my androide to android 8 or higher
Click to expand...
Click to collapse
Unfortunately, I have no custom roms available for this phone (