Related
Hello Yu Yureka fans!!!
This for the Yu Yureka fans who want to root the phone but don't want to miss OTA update by flashing custom recovery
In this thread i will tell you how to ROOT your Yu Yureka without flashing custom recovery.
This method will not flash custom recovery over stock recovery, this will just boot the custom recovery once just to flash the superuser.zip. so you will be back to stock recovery after flashing superuser.zip.
So lets get started...
Your Bootloader should be UNLOCKED
Files you need:
1. adb and fastboot drivers
2. A CWM recovery link (don't worry we wont flash it, it is just needed to install superuser.zip)
3. Superuser.zip link (save this in your sd card or internal memory)
Note: Keep recovery.img file in the same folder where adb and Fastboot drivers are placed and always open command window from that folder.
Connect your phone to pc via data cable
Steps:
1. Open command window (cntl+shift+right click)
2. Type
Code:
adb devices
if your device is connected you will get it in connected devices
3. Type
Code:
adb reboot-bootloader
4. Type
Code:
fastboot -i 0x1ebf boot recovery-yu.img
now your device will boot into recovery mode
5. Select install zip from sd and navigate where you have downloaded the superuser.zip and select install.
6. Done!!! Your device is rooted and you are still in stock recovery :good: you wont miss the OTA
To check if you are in stock recovery just reboot into recovery :good:
Hit thanks if this helped :good:
This isn't yours, You copied it from YuPlayGodForums, from DoomLord's post...
N'ayam Amarsh'e said:
This isn't yours, You copied it from YuPlayGodForums, from DoomLord's post...
Click to expand...
Click to collapse
First i am not a user of yuplaygod forums,
Second its not copied
Third you have no right to point at someone without any valid reason
Lastly stop spamming my post (read xda forum rules first you visit it here --> http://forum.xda-developers.com/announcement.php?f=3861)
@aashking
You can't boot the recovery image on locked bootloader; we have covered this fact already.
http://forum.xda-developers.com/showpost.php?p=58628082&postcount=12
Titokhan said:
@aashking
You can't boot the recovery image on locked bootloader; we have covered this fact already.
http://forum.xda-developers.com/showpost.php?p=58628082&postcount=12
Click to expand...
Click to collapse
@Titokhan yeah dude thanks for reminding i will update the OP :good:
Unable to get the 3rd command working. It keeps waiting for the device and the device reboots in normal mode. What am I doing wrong?
jitendragarg said:
Unable to get the 3rd command working. It keeps waiting for the device and the device reboots in normal mode. What am I doing wrong?
Click to expand...
Click to collapse
Reinstall ADB Drivers
adbdriver.com
N'ayam Amarsh'e said:
Reinstall ADB Drivers
adbdriver.com
Click to expand...
Click to collapse
Thanks, will check. Although I downloaded the drivers just today, so not sure, how it is not up to date. Anyway, will check it once I am home in 3 hours.
tried resintalling the drivers. didn't help. command prompt still keeps on waiting for device forever, while phone is in fastboot mode.
Edit:
If I cancel the third command, and check the list again, phone is not listed. Somehow, after rebooting into bootloader, phone stops the adb connection.
i am on twrp recovery can i flash this recovery on that and update the new ota?
please help
[RECOVERIES & ROOT] Yureka custom recoveries & Root without Changing Stock Recovery
Note : This tutorial is for YU Yureka based on CM11 (KK 4.4.4) 32bit architecture
and
do it on your own risk, I will not be responsible if you brick your phone
Here is the detailed guide and collection of stock and all custom recoveries for YU Yureka and detailed guide to Root YU Yureka without changing Stock Recovery
Requirements
1. YU Yureka (obviously) with USB Data cable
2. PC / Laptop (Having Windows installed at least Windows 7 or above)
3. Drivers (Windows Automatically detect and install the required drivers)
4. ADB & Fastboot binary package that can be downloaded from XDA 15 seconds ADB Installer v1.4.2']http://forum.xda-developers.com/showthread.php?t=2588979
5. Custom Recovery (Anyone in which you are interested CWM, PhiZ, TWRP)
6. Latest SuperSU.zip file to root your phone
Warning: This process may delete all data stored in internal storage so better backup all the files stored in internal storage.
Step One
Enable USB Debugging on your device you can just follow these steps:
Go to Settings> About phone and keep taping on build number at least 7 times or till it appears "You are a developer now",
Now again go to settings>developer option (only after the previous step it will be enabled)> check/select USB debugging.
Step Two
Unlock your bootloader to flash custom recovery and root.
Here is the process
1. Download the adb & fastboot binary package and install it.
2. Put your phone into FASTBOOT mode by following anyone from below methods :
Method 1 (easiest)
-------------------
a. Power down phone
b. Plug USB cable to your PC
c. Press and hold Vol Up button and plug other end of USB to your device, soon you will see the fastboot screen.
(or without plugging USB Cable, Press and Hold Power and Vol Up buttons simultaneously, until you see the screen
"FASTBOOT MODE"
Method 2
---------
a. While your phone is Power On, plug USB Data Cable with PC and Phone (USB Debuging must be Enable)
b. Open Command Prompt on your PC (with Administartor rights) and type the following command
adb -s 0x1ebf devices
You will get results something like that :
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
3a289c2 device
*Note : If you get "authorization message" then look on your mobile screen and authorize your PC and run the command again.
c. Now note down the device no. (for e.g. in above "3a289c2") and type the following command
adb -s 3a289c2 reboot bootloader
[*Note replace the device id with your id (here 3a289c2), that you got in last command]
Now your phone must be booted into fastboot mode. A screen with "Fastboot Mode" should be appear on your phone.
3. Device drivers will get installed by windows (please wait for the driver installation to complete)
4. After driver installation is done go to the folder where you have extracted the package
5. Now open elevated DOS command prompt (terminal) on your PC and go into the same folder where you saved the recovery file
(*Note : to start command prompt directly from desired folder, while holding the Shift Key Right Click on folder and select start "open command window here")
6. Type the following command to check if the device was detected in fastboot mode
fastboot -i 0x1ebf devices
you should get output like : 2a25d00 fastboot
if you don't get similar output it means that the drivers weren't correctly installed or the device wasn't connected properly
7. If the output is similar to above then run the following command:
fastboot -i 0x1ebf oem unlock
you should get output something like :
.....
OKAY [ 0.003s]
finished. total time: 0.004s
8. Now your bootloader is now unlocked.
*Note : if you want to re-lock your bootloader again (for warranty on any other reason), again boot into fastboot mode and this time type the following command and enter
fastboot -i 0x1ebf oem lock
Step Three
Boot your phone into recovery (temporarily or permanently) and root your phone
1. Download SuperSU.zip and put it on root of your internal or external SD card
2. To load custom recovery (CWM / TWRP / PhiZ) temporarily, now type this command in terminal :
fastboot -i 0x1ebf boot CWM_6.0.5.1_recovery-yu.img
*Note 1 : if you want to flash the custom recovery permanently then us the following command
fastboot -i 0x1ebf flash CWM_6.0.5.1_recovery-yu.img
*Note 2 : if your download custom recovery is named differently (here CWM_6.0.5.1_recovery-yu.img) then while writing the above commands you need to put the name of the recovery same as as your saved file name (anyone CWM / Phiz / TWRP)
3. Done ! You loaded custom recovery temporarily, if command used with "boot" hence to root your phone, proceed to next section (step 5).
or
If you flashed recovery permanently, using command with "flash" then boot your phone into recovery. To do so, you have Two options
i) type the following command and press enter : adb -s 3a289c2 reboot recovery
or
ii) power off your phone, after then press and hold "Vol up+ Vol down + Power" buttons simultaneously to boot into custom recovery.
Now to root your phone proceed with next section (step 5).
Root your phone
5. To gain root access, flash SuperSu.zip that is stored on your internal or external SD card (in step 1)
6. Choose reboot phone and enjoy rooted phone with stock or custom recovery !
Special Note 1
I didn't tested, but came to know that root doesn't effect OTA update on Yureka.
You can get OTA updates with root but after the OTA update is flashed you will loose root access. To keep it or to avoid this please go to System Settings -> Developer Options -> UNTICK -"Update CM Recovery" (update recovery while installing system updates)
Even though if someone want to go back to Stock recovery, then download the official stock recovery (link no. 6 above) and flash it using command in fastboot mode (second command in step 2 under head "STEP THREE")
Downloads
1. 15 seconds ADB Installer v1.4.2 http://forum.xda-developers.com/showthread.php?t=2588979
2. Super SU latest v2.46 http://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip
3. CWM 6.0.5.1 https://s.basketbuild.com/devs/vishal_android_freak/yu/yureka
OR http://d-h.st/ElAe
4. PhilZTouch 6.59 based on CWM v6.0.5.1 http://www.androiddevs.net/downloads/
OR http://d-h.st/UqWK
5. TWRP 2.8.5.0 http://techerrata.com/browse/twrp2/tomato
OR https://www.androidfilehost.com/?fid=95916177934528156
OR http://d-h.st/5wDD
6. YU Yureka Official Stock Recovery http://d-h.st/tQ1k
Special Note 2
Without the vendor id, phone will not get detected in fastboot mode.
Like if you want to check fastboot type this :
fastboot -i 0x1ebf devices
therefore, always add "i -0x1ebf" after fastboot and then write your command
aabidhashmi said:
Here is is collection of all custom recoveries for YU Yureka and detailed guide to Root YU Yureka without changing Stock Recovery
Requirements
1. YU Yureka (obviously) with USB Data cable
2. PC / Laptop (Having Windows installed at least Windows 7 or above)
3. Drivers (Windows Automatically detect and install the required drivers)
4. ADB & Fastboot binary package that can be downloaded from XDA 15 seconds ADB Installer v1.4.2']http://forum.xda-developers.com/showthread.php?t=2588979
5. Custom Recovery (Anyone in which you are interested CWM, PhiZ, TWRP)
6. Latest SuperSU.zip file to root your phone
Warning: This process may delete all data stored in internal storage so better backup all the files stored in internal storage.
Step One
Enable USB Debugging on your device you can just follow these steps:
Go to Settings> About phone and keep taping on build number at least 7 times or till it appears "You are a developer now",
Now again go to settings>developer option (only after the previous step it will be enabled)> check/select USB debugging.
Step Two
Unlock your bootloader to flash custom recovery and root.
Here is the process
1. Download the adb & fastboot binary package and install it.
2. Power down phone
3. Plug USB cable to your PC
4. Press and hold Vol Up button and plug other end of USB to your device, soon you will see the fastboot screen.
(or without plugging USB Cable, Press and Hold Power and Vol Up buttons simultaneously, until you see the screen
"FASTBOOT MODE"
5. Device drivers will get installed by windows (please wait for the driver installation to complete)
6. After driver installation is done go to the folder where you have extracted the package
7. Now open elevated DOS command prompt (terminal) on your PC and go into the same folder where you saved the recovery file
* to start command prompt directly from desired folder, while holding the Shift Key Right Click on folder and select start "open command window here"
8. Type the following command to check if the device was detected in fastboot mode
fastboot -i 0x1ebf devices
you should get output like : 2a25d00 fastboot
if you don't get similar output it means that the drivers weren't correctly installed or the device wasn't connected properly
9. If the output is similar to above then run the following command:
fastboot -i 0x1ebf oem unlock
you should get output something like :
.....
OKAY [ 0.003s]
finished. total time: 0.004s
10. Now your bootloader is now unlocked.
Step Three
Root your phone without changing your stock recovery
1. Download SuperSU.zip and put it on root of your internal or external SD card
2. To load custom recovery (CWM / TWRP / PhiZ) temporarily, now type this command in terminal :
fastboot -i 0x1ebf boot recovery CWM_6.0.5.1_recovery-yu.img
*Note : if your download custom recovery is named differently (here CWM_6.0.5.1_recovery-yu.img) then while writing the above command you need to put the name of the recovery same as as your saved file name (anyone CWM / Phiz / TWRP)
Done ! You flashed custom recovery temporarily.
3. Now press and hold "Vol up+ Vol down + Power" buttons simultaneously to boot into custom recovery.
4. To gain root access flash SuperSu.zip that is stored on your internal or external SD card (in step 1)
5. Choose reboot phone and enjoy rooted phone without changing stock recovery !
Downloads
1. 15 seconds ADB Installer v1.4.2 http://forum.xda-developers.com/showthread.php?t=2588979
2. Super SU latest v2.46 http://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip
3. CWM 6.0.5.1 https://s.basketbuild.com/devs/vishal_android_freak/yu/yureka
OR http://d-h.st/ElAe
4. PhilZTouch 6.59 based on CWM v6.0.5.1 http://www.androiddevs.net/downloads/
OR http://d-h.st/UqWK
5. TWRP 2.8.5.0 http://techerrata.com/browse/twrp2/tomato
OR https://www.androidfilehost.com/?fid=95916177934528156
OR http://d-h.st/5wDD
Special Note
Without the vendor id, phone will not get detected in fastboot mode.
Like if you want to check fastboot type this :
fastboot -i 0x1ebf devices
therefore, always add "i -0x1ebf" after fastboot and then write your command
Click to expand...
Click to collapse
Few errors noted:
1. You can't say flashing recovery when you are booting it.
2. In step 3 point 3 is not valid because when your command is to boot it will automatically boot into recovery you need not use combination keys.
3. Last point vender id is wrong !!!
Few suggestions:
1. It feels like you have not tested this by yourself
2. There is already a guide for "rooting without flashing recovery". Search before posting.
Regards
aashking
aashking said:
Few errors noted:
1. You can't say flashing recovery when you are booting it.
2. In step 3 point 3 is not valid because when your command is to boot it will automatically boot into recovery you need not use combination keys.
3. Last point vender id is wrong !!!
Few suggestions:
1. It feels like you have not tested this by yourself
2. There is already a guide for "rooting without flashing recovery". Search before posting.
Regards
aashking
Click to expand...
Click to collapse
Dear aaskking
Thanks to inform. Here is the corrections
1 & 2 - Tutorial updated with "boot" and "flash" commands separately.
3 + Vendor ID is correct nothing wrong in it.
4 - I already tested all those procedures and commands. I never post anything without testing.
5 - Yes, I also seen that available guide, but that is not so much detailed and also required files links are not provided.
Anyway, thanks for your suggestions.
aabidhashmi said:
Dear aaskking
Thanks to inform. Here is the corrections
1 & 2 - Tutorial updated with "boot" and "flash" commands separately.
3 + Vendor ID is correct nothing wrong in it.
4 - I already tested all those procedures and commands. I never post anything without testing.
5 - Yes, I also seen that available guide, but that is not so much detailed and also required files links are not provided.
Anyway, thanks for your suggestions.
Click to expand...
Click to collapse
EDIT : You can get OTA updates with root..
After the update is flashed you will loose root access ..
To keep it or to avoid this please write the following step
STEP) In Developer Option UNTICK -"Update CM Recovery".
That's it.. Cheers mate wonderful thread.. @aabidhashmi @aashking
arjunsingh1000 said:
EDIT : You can get OTA updates with root..
After the update is flashed you will loose root access ..
To keep it or to avoid this please write the following step
STEP) In Developer Option UNTICK -"Update CM Recovery".
That's it.. Cheers mate wonderful thread.. @aabidhashmi @aashking
Click to expand...
Click to collapse
Thanks Arjun Singh @arjunsingh1000 for suggestion and appreciation
Post updated ...
aabidhashmi said:
Thanks Arjun Singh @arjunsingh1000 for suggestion and appreciation
Post updated ...
Click to expand...
Click to collapse
Great mate cheers just checked and tried that ota updates are available and work.. On stock recovery... Locked bootloader and with root..
Achieved this by downgrading to the very first cm11 firmware and got then rooted it and locked the bootloader then I just booted it and got the incremental update .. Downloaded and flashed .. Works perfectly.. Root not lost due to the untick in dev options..
Thanks again Arjun Singh, for confirming OTA updates are working.
I am already on Stock ROM & recovery {rooted} and tried the same procedure {locked the bootloader}, but no updates for me.
Is updates are really there, or something wrong with me ?
Sent from my AO5510 using Tapatalk
I am simply unable to get the device listed in command prompt after fastboot mode is enabled. my phone has option to boot into fastboot mode in power options. i tried that option, i tried using command to boot into fastboot. But somehow, when phone is in fastboot mode, it does not get detected by fastboot application (even though windows installs drivers successfully).
I have tried 3 different laptops. All had same problem. No idea how to solve this.
aabidhashmi said:
Thanks again Arjun Singh, for confirming OTA updates are working.
I am already on Stock ROM & recovery {rooted} and tried the same procedure {locked the bootloader}, but no updates for me.
Is updates are really there, or something wrong with me ?
Sent from my AO5510 using Tapatalk
Click to expand...
Click to collapse
Well I guess you are on the latest build XN0PHQ I guess? Another beta update was made but not rolled out it is um XNPH08P I know its a little late but just in case you don't know..
---------- Post added at 05:30 PM ---------- Previous post was at 05:28 PM ----------
jitendragarg said:
I am simply unable to get the device listed in command prompt after fastboot mode is enabled. my phone has option to boot into fastboot mode in power options. i tried that option, i tried using command to boot into fastboot. But somehow, when phone is in fastboot mode, it does not get detected by fastboot application (even though windows installs drivers successfully).
I have tried 3 different laptops. All had same problem. No idea how to solve this.
Click to expand...
Click to collapse
Ahahahaah... I know just the way... Do not reboot via adb ...
Switch off your phone remove your battery and put it back in do not turn it on.. But connect your USB cable and at the same time hold the power up or maybe down button .. Voila your in fastboot which will get detected .. Don't forget to use the vendor id.
arjunsingh1000 said:
Ahahahaah... I know just the way... Do not reboot via adb ...
Switch off your phone remove your battery and put it back in do not turn it on.. But connect your USB cable and at the same time hold the power up or maybe down button .. Voila your in fastboot which will get detected .. Don't forget to use the vendor id.
Click to expand...
Click to collapse
I tried this method but phone does not get detected in fastboot mode at all. I have drivers installed for all different modes I connect my phone as. No luck at all.
Also, weird thing is, I have an option to directly go to fastboot mode from the power menu.
Jitendra Garg
Your driver's are not installed
As there is no special drivers setup, so connect your PC with Internet then plug your phone and let Windows install drivers automatically.
Sent from my AO5510 using Tapatalk
You could have been frustrated with all the features that’s supposed to be in your New Huawei Watch is nowhere to be found. Like Wi-Fi, Bluetooth and Language Selection are all hidden in the China Stable Rom of the Huawei Watch.
I have talked to the CSR of Huawei in China, they honestly told me that the Wi-Fi certificate for the watch is not yet certified that’s why they cannot unleash it yet but it is embedded inside the watch should future updates allows the Wi-Fi to be used. Regarding the language selection, local China release is locked to Simplified Chinese, whether you like it or not.
If you happen to buy from China or received a gift with a China local release Huawei Watch, here is the guide on how to flash with an English Rom which I have already tested mine on.
Here is the complete guide:
Step 1: Put the Watch to Fastboot Mode
1) Hold down the power button
2) The screen will go black for about 2 seconds and then boot into the Huawei logo. Keep holding down the power button.
3) Wait for the first vibration, release the power button and then immediately give the power button one short press.
Note: If you feel the second vibration, you waited too long to do the release and press. Start over again with Step 1.
Another alternative for Step 1:
1.) Install ADB SETUP V1.3
https://drive.google.com/file/d/0B_1zjuazXSqbQ0p6NWtvRk9OMzA/edit
2.) Enable ADB and connect to computer
How to Enable ADB:
- Go to About
- Click 5 times on Build Number to access Developer Mode
- Go to Developer Options
- Enable ADB Debugging
3.) Go into command prompt mode
4.) Reboot watch into Fastboot mode using this code:
adb reboot-bootloader
Step 2: Unlock the Bootloader
1.) On command prompt mode, type this command: Fastboot Oem Unlock
2.) accept the prompt on the watch.
Note: If successful, command prompt will say your bootloader is already unlocked.
Step 3: Flashing
Download first the three files before proceeding:
Boot Img: https://mega.nz/#!rgRQHRrb!lgQCvqH-qkuqitPRRXfCad29MdmJ6ynaUHJDr0hjeLM
Recovery Img: https://mega.nz/#!ahgjxA4R!y8Hb0CBVBRwUr0tA3HeFrrqh0ALAiMyqJu0pLsBsAD8
System Img: https://mega.nz/#!2pYVBDpA!wQJT8LDcffk7uxEmrsqna6MKWIODD-FqBO_k4Poml7g
After downloading the three files, lets proceed:
1.) While on Fastboot mode, type this on the command prompt one at a time:
Code:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
2.) and then go to recovery and do a wipe data / factory reset.
Congrats! Your done!
Further Reading if you are stuck on flashing System.img
There are some reason beyond my explanation why the system.img cannot be flashed to the watch, here is the workaround:
1.) First of all download the TWRP and fastboot boot it:
TWRP download: http://forum.xda-developers.com/attachment.php?attachmentid=3505656&d=1444766757
Code:
fastboot boot TWRP2.8.7.0-Sturgeon.img
2.) Now your watch is in TWRP and you can no longer use ADB commands, go to your watch and select Advanced, then select ADB Side Load
3.) Going back to command prompt, push the system.img in the sdcard so:
Code:
adb push system.img /sdcard/
4.) Now flash it:
Code:
adb shell dd if=/sdcard/system.img of=/dev/block/platform/msm_sdcc.1/by-name/system
5.) Reboot.
Now you may encounter bootloop after flashing which I did, go back to Step 1 Fastboot mode and select Reboot Recovery, then wipe data and then clear cache, then you are good to go!
This is the most complete guide I can come up with based on my own explorations. Hope this helps.
Where can i find the drivers for this watch.
When i plug this watch into my computer Windows doesn't detect the drivers. I've tried looking on the HuaWei website but there are no downloadable drivers. Any help?
coolcaty said:
Where can i find the drivers for this watch.
When i plug this watch into my computer Windows doesn't detect the drivers. I've tried looking on the HuaWei website but there are no downloadable drivers. Any help?
Click to expand...
Click to collapse
Look here : https://m.reddit.com/r/hwatch/comments/3n9ckp/how_to_get_adb_access_over_usb/
"Fastboot Oem Unlock" should be "fastboot oem unlock" otherwise it won't work. Also make sure to have ADB 1.0.32 at least for watches!
hello!
i do all step and complete flash with twrp mode . but when reboot and will go to reboot recovery the watch restart and restart!
sry for weak english!
j.spectator said:
hello!
i do all step and complete flash with twrp mode . but when reboot and will go to reboot recovery the watch restart and restart!
sry for weak english!
Click to expand...
Click to collapse
5.) Reboot.
Now you may encounter bootloop after flashing which I did, go back to Step 1 Fastboot mode and select Reboot Recovery, then wipe data and then clear cache, then you are good to go!
Hi, first of all thanks for this awesome guide.
This is the first thing I am looking for after bought a Chinese watch from China.
Manage to go through ONLY I tried key in "fastboot oem unlock' all in small letters.
Then follow the guide instruction to goto recovery to wipe data after successfully go through the other flashing steps smoothly.
This is where I got stuck in infinite looping in Android lying and screen flashing every few seconds. I got panicked after trying multiple times failed to recover from this symptoms for a while.
Until finally manage to pull back to fastboot menu by keep press holding onto the power button. The steps of holding till first vibration then do a quick short press doesnt work.
I am glad that now I am back to normal with the English screen.
Next I will proceed to flash the TWRP and 1.4 update.
Hopefully everything goes smoothly.
Thank you for the guide once again and wish everyone success in updating and Enjoy!
Update: (9:29am)
Did a system update. Before was something like LBC49A, after system update it becomes LBC43B. I suppose this is 1.4 update as the name is the same.
Hence decided not to flash the TWRP recovery for the time being if it can continue auto system update.
Update (9/3/2016):
Sorry, nvr read through all the posts. Was thinking that (LBC43B) was the latest update.
So proceed to flash TWRP recovery then try to update to MEC23L (latest update) but failed to run "adb sideload update.zip"
Every time once enter into Recovery mode, the connection dropped. Then tried to do OTA update by factory reset as suggested but failed (confirmed my location can OTA as one use from same location didi it.)
This morning went back to PC flash back the original Stock Recovery from here.
Restart the watch and goto System Update, receive message "Charge the watch to update to MEC23L"
My thot - OTA only allow with Stock Recovery?
Update done but still cannot sms. ??
Btw, for LBC43B, many functions cannot work properly like sms, call and no sound at all. Thx n Enjoy.
P.S. Using Minimal ADB and Fastboot, PDAnet driver(for watch USB driver), running on Win7, connect via watch USB charge docking station.
help me please
No OS installed! Are you sure you wish to reboot?
This is my problem, I can´t install it-
I send you a private message Richboy234, can you help me please?
richboy324 said:
You could have been frustrated with all the features that’s supposed to be in your New Huawei Watch is nowhere to be found. Like Wi-Fi, Bluetooth and Language Selection are all hidden in the China Stable Rom of the Huawei Watch.
I have talked to the CSR of Huawei in China, they honestly told me that the Wi-Fi certificate for the watch is not yet certified that’s why they cannot unleash it yet but it is embedded inside the watch should future updates allows the Wi-Fi to be used. Regarding the language selection, local China release is locked to Simplified Chinese, whether you like it or not.
If you happen to buy from China or received a gift with a China local release Huawei Watch, here is the guide on how to flash with an English Rom which I have already tested mine on.
Here is the complete guide:
Step 1: Put the Watch to Fastboot Mode
1) Hold down the power button
2) The screen will go black for about 2 seconds and then boot into the Huawei logo. Keep holding down the power button.
3) Wait for the first vibration, release the power button and then immediately give the power button one short press.
Note: If you feel the second vibration, you waited too long to do the release and press. Start over again with Step 1.
Another alternative for Step 1:
1.) Install ADB SETUP V1.3
https://drive.google.com/file/d/0B_1zjuazXSqbQ0p6NWtvRk9OMzA/edit
2.) Enable ADB and connect to computer
How to Enable ADB:
- Go to About
- Click 5 times on Build Number to access Developer Mode
- Go to Developer Options
- Enable ADB Debugging
3.) Go into command prompt mode
4.) Reboot watch into Fastboot mode using this code:
adb reboot-bootloader
Step 2: Unlock the Bootloader
1.) On command prompt mode, type this command: Fastboot Oem Unlock
2.) accept the prompt on the watch.
Note: If successful, command prompt will say your bootloader is already unlocked.
Step 3: Flashing
Download first the three files before proceeding:
Boot Img: https://mega.nz/#!rgRQHRrb!lgQCvqH-qkuqitPRRXfCad29MdmJ6ynaUHJDr0hjeLM
Recovery Img: https://mega.nz/#!ahgjxA4R!y8Hb0CBVBRwUr0tA3HeFrrqh0ALAiMyqJu0pLsBsAD8
System Img: https://mega.nz/#!2pYVBDpA!wQJT8LDcffk7uxEmrsqna6MKWIODD-FqBO_k4Poml7g
After downloading the three files, lets proceed:
1.) While on Fastboot mode, type this on the command prompt one at a time:
Code:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
2.) and then go to recovery and do a wipe data / factory reset.
Congrats! Your done!
Further Reading if you are stuck on flashing System.img
There are some reason beyond my explanation why the system.img cannot be flashed to the watch, here is the workaround:
1.) First of all download the TWRP and fastboot boot it:
TWRP download: http://forum.xda-developers.com/attachment.php?attachmentid=3505656&d=1444766757
Code:
fastboot boot TWRP2.8.7.0-Sturgeon.img
2.) Now your watch is in TWRP and you can no longer use ADB commands, go to your watch and select Advanced, then select ADB Side Load
3.) Going back to command prompt, push the system.img in the sdcard so:
Code:
adb push system.img /sdcard/
4.) Now flash it:
Code:
adb shell dd if=/sdcard/system.img of=/dev/block/platform/msm_sdcc.1/by-name/system
5.) Reboot.
Now you may encounter bootloop after flashing which I did, go back to Step 1 Fastboot mode and select Reboot Recovery, then wipe data and then clear cache, then you are good to go!
This is the most complete guide I can come up with based on my own explorations. Hope this helps.
Click to expand...
Click to collapse
Hi, I have a problem, when I do this :
"select Advanced, then select ADB Side Load" after 4 or 5 minutes processing it saids "failed"
and then I can do this step "adb push system.img /sdcard/"
but not this "adb shell dd if=/sdcard/system.img of=/dev/block/platform/msm_sdcc.1/by-name/system"
Any idea please, thank you.
jbctiong said:
Hi, first of all thanks for this awesome guide.
This is the first thing I am looking for after bought a Chinese watch from China.
Manage to go through ONLY I tried key in "fastboot oem unlock' all in small letters.
Then follow the guide instruction to goto recovery to wipe data after successfully go through the other flashing steps smoothly.
This is where I got stuck in infinite looping in Android lying and screen flashing every few seconds. I got panicked after trying multiple times failed to recover from this symptoms for a while.
Until finally manage to pull back to fastboot menu by keep press holding onto the power button. The steps of holding till first vibration then do a quick short press doesnt work.
I am glad that now I am back to normal with the English screen.
Next I will proceed to flash the TWRP and 1.4 update.
Hopefully everything goes smoothly.
Thank you for the guide once again and wish everyone success in updating and Enjoy!
Update: (9:29am)
Did a system update. Before was something like LBC49A, after system update it becomes LBC43B. I suppose this is 1.4 update as the name is the same.
Hence decided not to flash the TWRP recovery for the time being if it can continue auto system update.
Update (9/3/2016):
Sorry, nvr read through all the posts. Was thinking that (LBC43B) was the latest update.
So proceed to flash TWRP recovery then try to update to MEC23L (latest update) but failed to run "adb sideload update.zip"
Every time once enter into Recovery mode, the connection dropped. Then tried to do OTA update by factory reset as suggested but failed (confirmed my location can OTA as one use from same location didi it.)
This morning went back to PC flash back the original Stock Recovery from here.
Restart the watch and goto System Update, receive message "Charge the watch to update to MEC23L"
My thot - OTA only allow with Stock Recovery?
Update done but still cannot sms. ??
Btw, for LBC43B, many functions cannot work properly like sms, call and no sound at all. Thx n Enjoy.
P.S. Using Minimal ADB and Fastboot, PDAnet driver(for watch USB driver), running on Win7, connect via watch USB charge docking station.
Click to expand...
Click to collapse
Hi there
All i know is you can flash the stock rom then update via OTA
mine is running marshmallow already now MEC23L
This is the safer way coz i never tried to flash in the MEC23L
Cheers!
alesramosfj said:
Hi, I have a problem, when I do this :
"select Advanced, then select ADB Side Load" after 4 or 5 minutes processing it saids "failed"
and then I can do this step "adb push system.img /sdcard/"
but not this "adb shell dd if=/sdcard/system.img of=/dev/block/platform/msm_sdcc.1/by-name/system"
Any idea please, thank you.
Click to expand...
Click to collapse
I did not encounter this error
did you try the first method before doing the TWRP?
A Problem
Hi. I have a problem. I complete step3. I code command: fastboot oem reboot-recovery . Its Failed. I seclected recovery on watch. But when selecting this plan is faulty. Only flashing screen icon Android. I tried again, but still the same. Can you help me?
h**ps://drive.google.com/file/d/0B0F7_Vdg_eg3Nms3M2oyVmZ1RjA/view?usp=sharing
begioxx said:
Hi. I have a problem. I complete step3. I code command: fastboot oem reboot-recovery . Its Failed. I seclected recovery on watch. But when selecting this plan is faulty. Only flashing screen icon Android. I tried again, but still the same. Can you help me?
Click to expand...
Click to collapse
hi there
i think you need to do a further reading on the one after step three
there are chances that you will get stuck in flashing the system image file
there is a workaround.
try it again
hope it helps.
richboy324 said:
I did not encounter this error
did you try the first method before doing the TWRP?
Click to expand...
Click to collapse
Hello,
I'm also encountering this error. I did try the first method, and I'm getting stuck on activating ADB Side Load. Any tips?
Hi, there's a problem and i can't mount partition /data and /cache
plz help
Thanks a lot man you are a gem
I in hurry formatted system from twrp and was without OS. very detailed tutorial for beginners with adb. I am back with watch booting fine now
Just a note. I tried doing this while in China without vpn access for my phone. This made it so I couldn't sync up or pair because it kept trying to access google which was blocked. Once I got back to Canada I was able to do everything and update to newest OTA. If you leave it on chinese rom you can use in china and pair with the Android Wear China version app.
alesramosfj said:
No OS installed! Are you sure you wish to reboot?
This is my problem, I can´t install it-
I send you a private message Richboy234, can you help me please?
Click to expand...
Click to collapse
Hey, did he ever get back to you? I've got the same thing going on right now.
alesramosfj said:
No OS installed! Are you sure you wish to reboot?
This is my problem, I can´t install it-
I send you a private message Richboy234, can you help me please?
Click to expand...
Click to collapse
http://forum.xda-developers.com/hua...ock-huawei-watch-t3219596/page11#post66771952
Not sure if he got back to you. I had the same problem, and it involved the system.img that I downloaded from the link above. It wasn't complete for some reason. On this thread attached, it has a zip that has it all. My watch works fine now. I want to thank the OP here for showing me the steps to take. You all ROCK!
Hi all,
While trying to install custom mod i accidentally deleted my original rom as well as the custom rom from my phone. I can access twrp fast boot but while trying to install zip file its missing from phone. Any way to install any custom rom at this point?
Update : Restarted my phone ( well powered off coz of low battery) . When i charged and switched it on , twrp is not there . Instead when i go to recovery mode , the original one plus recovery mode is appearing.
gamer361 said:
Hi all,
While trying to install custom mod i accidentally deleted my original rom as well as the custom rom from my phone. I can access twrp fast boot but while trying to install zip file its missing from phone. Any way to install any custom rom at this point?
Click to expand...
Click to collapse
Sideloading is the easiest option.
Boot into TWRP, find ADB Sideload mode (I think it's under "Advanced", not sure), connect phone to PC via USB cable and flash ROM directly from PC with "adb sideload rom-name" command.
This is a very short version, if you need me to explain anything in depth just say it
Sent from my OnePlus 3 using Tapatalk
Explorer23 said:
Sideloading is the easiest option.
Boot into TWRP, find ADB Sideload mode (I think it's under "Advanced", not sure), connect phone to PC via USB cable and flash ROM directly from PC with "adb sideload rom-name" command.
This is a very short version, if you need me to explain anything in depth just say it
Sent from my OnePlus 3 using Tapatalk
Click to expand...
Click to collapse
if possible please tell me step by step.
gamer361 said:
if possible please tell me step by step.
Click to expand...
Click to collapse
Sorry for late reply.
So, first things first, make sure you have working adb/fastboot on your PC (you can get it >>HERE<< if you need it; select Y for all options).
- download latest TWRP recovery >>HERE<<
- download a ROM of your choice
- in case you go for a custom ROM you'll probably also need latest firmware (CLICK), Gapps (CLICK) and possibly Magisk (CLICK)
- open command prompt in folder where you've put all downloaded files - hold Shift and right click in that folder > open command window here.
- boot phone into fastboot mode and connect it to PC
- type fastboot devices in cmd to see if the phone is properly recognized (should say something like "device #serial-number" IIRC)
- flash TWRP by typing fastboot flash recovery recovery-name.img
- reboot device into recovery mode. Fastboot generally doesn't support rebooting into recovery, but our phone makes it easy with that 5 second timeout on boot. Type fastboot reboot and as soon as it displays that warning screen press a volume button and then scroll to recovery with volumpe up/down.
You should be booted into TWRP now. Let's continue to flashing a ROM.
Assuming you're going for a custom ROM, start with firmware:
- select "Advanced" in TWRP
- select "ADB Sideload"
- swipe to start sideload
- type adb devices in cmd - it should recognize that the device is in sideload mode
- type adb sideload firmware.zip and wait for it to finish
- go back to main TWRP screen and repeat the steps to get into sideload mode
- type adb sideload rom-filename.zip
- repeat to flash Gapps and Magisk
If you chose to flash stock ROM rather than custom then you can skip firmware and Gapps and flash just the ROM (and possibly magisk, that's up to you).
Done! Now you can boot into system.
This is a basic guide to flash a rom via recovery in Mi A3 as title says.
Is created to help all those that want but can't.
Please read before act, and if you don't understand....well read again.
Mi A3 is a device with treble support, and while is not difficult to flash a rom,is a little bit tricky process.
So here are the detailed steps to do achieve that.
First things first, you've got to have your bootloader unlocked. Follow below steps to do that:
-Enable developer options by going to settings/about phone and clicking 5 times on build number.
Inside developer options:
-Find and enable OEM unlocking.
-Find and enable USB debugging.
In adb tools type:
-
Code:
adb devices
reboot to bootloader.
-
Code:
adb reboot bootloader
Unlock bootloader(you will lose all your data).
Code:
fastboot flashing unlock
When the device reboot, boot once again in fastboot by powering off then power on while pressing vol down button.
Type command to full unlock bootloader.
Code:
fastboot flashing unlock_critical
Proceed to recovery flash
Notice that you've got to have all files ready, either inside external sd or in your pc. All files are at the end of this thread as links or attachments.
Also i'm suggesting OrangeFox recovery for now because is the most stable.
-First you following the orangefox recovery installation guide:
- Download the OrangeFox zip file from here or the link at the end and copy it to your device (internal or external storage)
- Extract the recovery.img from the zip and store it, on the folder where you have adb and fastboot files, on your PC
- Open a cmd line and execute these commands (being on that folder, of course):
-
Code:
adb devices
(to make sure your device is detected)
-
Code:
adb reboot bootloader
(to reboot into fastboot mode)
-
Code:
fastboot getvar current-slot
(to check what's your current active slot)
-
Code:
fastboot set_active b
(if your active slot was a, if it was b then change it to a)
-
Code:
fastboot erase boot
-
Code:
fastboot flash boot recovery.img [b](OR WHATEVER NAME YOUR RECOVERY HAVE)[/b]
-
Code:
fastboot reboot
(NOTE : Before hitting "Enter", long press Vol + on your device until you see the Android One logo.
-->> By doing this your device will be forced to boot into Recovery and not into System <<--
- Install the OrangeFox zip (always install the latest build available and always keep a copy of recovery zip file in your external sd)
- Change slot to the one that was active on the beginning of these steps and reboot to Recovery (just to make sure that the slot, in fact, was changed)
After orangefox recovery is installed, you are ready to flash your rom.
You can move your rom files inside your external or internal memory(prefer external to avoid deleting them accidentally).
To do that you can either do it before the whole procedure, or after the recovery installation since you have mtp and adb available.
Copy them drag them or push them via adb(i'm not going to extend the adb push command here)
Now the flashing steps:
-Go to partition manager inside orangefox recovery and select data/format data(red button) and press format.Type YES.
-Go back and find the rom file inside your target directory(internal or external).
-Select the rom file and flash it.
-DO NOT REBOOT.
-Go back where you have the orangefox zip file, select it and flash it.
-Leave the device as is because after the installation it will reboot itself to recovery once again.
-Once the recovery starts again go to the target folder that you have the remaining files.
-Flash magiskV20.zip (if you want your device to be rooted).
-Flash Gapps if there are any or skip this step if your ROM provider have them included.
-Flash patchnofde10 zip to avoid data encryption(if you don't do that the rom will NOT boot).
-Reboot to system and enjoy.
All files are available to the links below.
Patchnofde file is attached to this post.
I'm not responsible if you cause a nuclear war or your cat or dog stop talking to you.
Credtits to:
Orangefox recovery team https://orangefox.tech/
Orangefox recovery dev for Mi A3 https://forum.xda-developers.com/mi-a3/development/official-orangefox-recovery-mi-a3-t3986177
Topjohnwu for the Magisk and Magisk manger https://******************/
XDA Forum because they exist
All devs that put some hard work for you to have a custom recovery and a custom rom and all they hear is questions about ho to do things.
Respect them and read before post a questions.
:angel::angel::angel:
Thanks for the detailed guide, always good to have it :good: :good:
my device is encrypted and if I boot a recovery it shows the data encrypted. How to remove encryption ?
drozo8o8 said:
my device is encrypted and if I boot a recovery it shows the data encrypted. How to remove encryption ?
Click to expand...
Click to collapse
Read it first then do it.
Patchnofde is for the encryption.
sotmax said:
Read it first then do it.
Patchnofde is for the encryption.
Click to expand...
Click to collapse
nvm I think I got it
Can anybody please help? I just bought this phone and followed this guide to the letter. The phone just boots back into recovery, whatever ROM I flash.
Is there support for Android backup and restore
Please tell steps for the same also
As it is not working for me
Mobile is Booting to recovery again after restoring backup
ReekyMarko said:
Can anybody please help? I just bought this phone and followed this guide to the letter. The phone just boots back into recovery, whatever ROM I flash.
Click to expand...
Click to collapse
Okay I got it to boot to Havoc OS but my wifi and gsm calls stopped working. Also videos were flashing during playback. I guess I was doing something wrong during the whole flashing process and the device ended up without the correct firmware.
I have reverted back to stock using one of the fastboot ROM flashing scripts and everything is fine, though I would like to go Android 10 without GAPPS if possible.
Thank you very much for the guide. Do you recommend any backup with orange box? If I want to revert to stock rom, do I need to know something?
How could I update the ROM?
darkjm93 said:
Thank you very much for the guide. Do you recommend any backup with orange box? If I want to revert to stock rom, do I need to know something?
Click to expand...
Click to collapse
You can go back to stock by flashing stock image with mi flashtool
ReekyMarko said:
Can anybody please help? I just bought this phone and followed this guide to the letter. The phone just boots back into recovery, whatever ROM I flash.
Click to expand...
Click to collapse
That's because you didn't follow it to the letter.
You have to flash Patchnofde to boot to rom.
vishwadeepmanu said:
Is there support for Android backup and restore
Please tell steps for the same also
As it is not working for me
Mobile is Booting to recovery again after restoring backup
Click to expand...
Click to collapse
Same as above.
If you don't flash patch for the encryption, you ll end up to recovery again. Also I recommend to read carefully the steps with the recovery flashing. You have to be sure that the slot is what it was at the beginning.
A out the Android backup, yes. You can take and restore backups freely.
Hello,
@sotmax
Thank you for your guide.
@ANyOne i have unlocked the bootloader, but after that, when i'm in fastboot mode, i'm not being detected by the adb devices command. Any idea why ?
mkpanic said:
Hello,
@sotmax
Thank you for your guide.
@ANyOne i have unlocked the bootloader, but after that, when i'm in fastboot mode, i'm not being detected by the adb devices command. Any idea why ?
Click to expand...
Click to collapse
Because ADB and fastboot are different modes and using different commands. In fastboot use "fastboot devices".
_mysiak_ said:
Because ADB and fastboot are different modes and using different commands. In fastboot use "fastboot devices".
Click to expand...
Click to collapse
Thank your for the answer.
If I only want to root the stock installing Orange, this guide works?
fastboot set_active command is not working...only fastboot options are displayed..Any solution?
sibikallikkat said:
fastboot set_active command is not working...only fastboot options are displayed..Any solution?
Click to expand...
Click to collapse
fastboot --set-active=a
fastboot --set-active=b
hi, i followed the guide to flash los17 with BiTGApps.
I also flashed the nofde patch. The phones boots normaly but i have no access to internal storage. All the folders have random numbers and letters. Any ideas?