Q&A for PhilZ Touch 6.59.0-CWM 6.0.5.1 Xperia T3[D5103]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for PhilZ Touch 6.59.0-CWM 6.0.5.1 Xperia T3[D5103]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Thank you so much for this release!
The only problem is that the "ro.product.device" is set to "D5102" .
Can you fix it?
BluePixel33 said:
Thank you so much for this release!
The only problem is that the "ro.product.device" is set to "D5102" .
Can you fix it?
Click to expand...
Click to collapse
yes I will fix it later.
BluePixel33 said:
Thank you so much for this release!
The only problem is that the "ro.product.device" is set to "D5102" .
Can you fix it?
Click to expand...
Click to collapse
@BluePixel33
you can download the fixed version from the post.
Xenon1978 said:
@BluePixel33
you can download the fixed version from the post.
Click to expand...
Click to collapse
Thanks a lot Man!
Hallo, I have installed PhilZ Touch 6.59.0-CWM 6.0.5.1 Xperia T3[D5103]... very good job...
I flash with custom recovery the FXP-cm-12-20150302-UNOFFICIAL-seagull.zip.. all good!!
but now i want to install the gapp with the CR and the xperia does not go into custom recovery mode... it's possible?????
tks
headS.
Hallo, I have installed PhilZ Touch 6.59.0-CWM 6.0.5.1 Xperia T3[D5103]... very good job...
I flash with custom recovery the FXP-cm-12-20150302-UNOFFICIAL-seagull.zip.. all good!!
but now i want to install the gapp with the CR and the xperia does not go into custom recovery mode... it's possible?????
tks
headS.
heaspeakerprod said:
Hallo, I have installed PhilZ Touch 6.59.0-CWM 6.0.5.1 Xperia T3[D5103]... very good job...
I flash with custom recovery the FXP-cm-12-20150302-UNOFFICIAL-seagull.zip.. all good!!
but now i want to install the gapp with the CR and the xperia does not go into custom recovery mode... it's possible?????
tks
headS.
Click to expand...
Click to collapse
when you flashed cm12 recovery is gone. there's no recovery in cm12
Xenon1978 said:
when you flashed cm12 recovery is gone. there's no recovery in cm12
Click to expand...
Click to collapse
ok tks!!!
but with which rom remains the recovery ?AOSP? or no rom?
tks...
heaspeakerprod said:
ok tks!!!
but with which rom remains the recovery ?AOSP? or no rom?
tks...
Click to expand...
Click to collapse
you have to wait for sometime.as of now there's no rom's
Can I do the same with T3 D5106???
Hi, I tink that we can do the same with D5106 model, I whan to try this, but the link for zip file does´n work × Invalid response from the server: 403
can you help me, i have unlock bootloader, android 4.4.4
tanks!!!
Service
thank for this.But Can you upload from mediafire?
hello and great job Xenon1978 , where is the folder for device D5103¿? In the download link (PhilzRecovery ) is all device but i can't see my xperia T3.
I like this device but i need have CWM, is a same drug! xD
sorry for my english and regardez
---------- Post added at 01:28 PM ---------- Previous post was at 01:11 PM ----------
ok, i'm the last writer hahaha. Now maked the process , the answer is the kernel, sorry Xenon and very thanks for yours work
stuck on logo
After flashing, the phone is stuck on logo.
I've got the latest kernel.
if you flash the lollipop build you stay with the same recovery....
Its not working
I tried everything you as you have written but it just says "boot_d5103.img" could not be loaded and also my pc says the img is corrupt ...
thanks a lot bro.........
thanks a lot bro.........
this is working very nice today 20/09/2015 it is working on sony xperia t3 d5102
again thank you so much
QA Bot said:
Q&A for PhilZ Touch 6.59.0-CWM 6.0.5.1 Xperia T3[D5103]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for PhilZ Touch 6.59.0-CWM 6.0.5.1 Xperia T3[D5103]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Click to expand...
Click to collapse
Related
[Q&A] [TOOL/UTILITY][TWRP][2.8][RECOVERY] TWRP 2.8.1.1 TeamWin Recovery Project 10/2
Q&A for [TOOL/UTILITY][TWRP][2.8][RECOVERY] TWRP 2.8.1.1 TeamWin Recovery Project 10/24
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [TOOL/UTILITY][TWRP][2.8][RECOVERY] TWRP 2.8.1.1 TeamWin Recovery Project 10/24. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Flashing TWRP
I just flash TWRP using the newest oden, correct?
Chazachbrown said:
I just flash TWRP using the newest oden, correct?
Click to expand...
Click to collapse
They all should work afaik.
best.
thanks for this info.
I had the same thing happen to me. could you please post the link to the odin flashable file?
thanks!
So I'm currently running TWRP 2.8.6.0,if I want to update to the newest TWRP do I simply download the .Zip and flash? As long as I'm running TWRP I don't have to use Odin.. Correct??
---------------
Admin Note: this thread has a dedicated questions and answers section which you can access here -->.
schlepprock said:
So I'm currently running TWRP 2.8.6.0,if I want to update to the newest TWRP do I simply download the .Zip and flash? As long as I'm running TWRP I don't have to use Odin.. Correct??
---------------
Admin Note: this thread has a dedicated questions and answers section which you can access here -->.
Click to expand...
Click to collapse
Yup
U can use twrp app in the play store its faster
erkkiboy83 said:
Is it possible to downgrade to previous kernel and system like going from android M to Android L using a backup of the L system?
Click to expand...
Click to collapse
Cause im looking to downgrade my honor 6 from android M to L since there's way too many battery issues with android M yet. It's not terrible but it's bad to go from two days of battery to charge both mid day and just before bedtime.
Q&A for [ROM][4.4.4][BUILT FROM SOURCE]Team UB ROM [22/12/14] [FINAL] [anzu]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][4.4.4][BUILT FROM SOURCE]Team UB ROM [22/12/14] [FINAL] [anzu]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Hello, do I have to install a kernel for this or I'll just keep mine? Sorry I'm kinda new in here
akoposiRAM said:
Hello, do I have to install a kernel for this or I'll just keep mine? Sorry I'm kinda new in here
Click to expand...
Click to collapse
Yeah u must flash provided kernel in the zip using PC
Using cmd write:
fastboot flash boot boot.img
Cheers
help
plz help
I did all the steps (wipe and format)
and install the zip file and gapps
click rebooting and the screen stuck to the LX logo and no more
i waited for 1 hour and still stucking !!!
Again i did all the steps but every time it stuck to that logo..... no more
N.B. my previous rom was using the LX kernel and in this rom .... should i install the kernel my self or just it will be automatically installed with the zip file of the rom ???
Q&A for [recovery] [qualcomm] [sm-n7502] [beta] cwm/philz recovery [14012015]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [recovery] [qualcomm] [sm-n7502] [beta] cwm/philz recovery [14012015]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Why does it say for kitkat version while n7502 doesn't have kitkat update ??
Can anyone confirm that it works .. thanks for the effort BTW
M7mouz said:
Why does it say for kitkat version while n7502 doesn't have kitkat update ??
Can anyone confirm that it works .. thanks for the effort BTW
Click to expand...
Click to collapse
that maybe a typo .. whats the current android version ??
rutvikrvr said:
that maybe a typo .. whats the current android version ??
Click to expand...
Click to collapse
JB 4.3
M7mouz said:
JB 4.3
Click to expand...
Click to collapse
the android version was a typo .. it is for jb 4.3
yes it will work for sure if you follow the instructions in the 1st post
Stable Recovery
Hi RVR
First of all I should have reply my heartfull Appreciatations for your efforts to make
A custom recovery for our forsaken glorious cell!
On the other hand I wanted to ask for more support for our phones, if it's possible for u
And it would be very kind of you!
To make a full-fledged recovery thats completely satble!
The freaking hell sized BEST REGARDS!!
I think I had sent this msg in a wrong theard too.
So accept my apologies!!
Sent from SM-N7502
Q&A for [Recovery][Script] TWRP and CWM recoveries for ANY custom ROM
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Recovery][Script] TWRP and CWM recoveries for ANY custom ROM. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Vlad2013_4pda said:
I tested CWM script on last fxp build CM12 ROM, it works
Click to expand...
Click to collapse
How you do that? can you explain a little please? i got cm12 and i can't install cwm.
Shudowamz said:
How you do that? can you explain a little please? i got cm12 and i can't install cwm.
Click to expand...
Click to collapse
I flashed CWM recovery just to check it works or not, and I advise to flash TWRP recovery, I use TWRP
Shudowamz said:
How you do that? can you explain a little please? i got cm12 and i can't install cwm.
Click to expand...
Click to collapse
This is basically a one time flash. One you flash it stays.
EDIT: I apologize wrong thread.
*blink*
will these recoveries work in cm12.1 roms (5.1.1) too???
FOTA kernel, recovery script with TWRP have some bugs at GUI (screen shifting) on my Xperia M with AOKP 4.4. Any solutions from this problem ?
Q&A for CWM Recovery for N7502
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for CWM Recovery for N7502. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Mersad_Maral said:
Hi every body.
Finally there is a test recovery for N7502.
Click to expand...
Click to collapse
This RECOVERY does not work.
Is there for 7502 working recovery?
VitaminVA said:
This RECOVERY does not work.
Is there for 7502 working recovery?
Click to expand...
Click to collapse
hI
the cwm work completely for N7502
But the philz is not working completely.
Mersad_Maral said:
hI
the cwm work completely for N7502
Click to expand...
Click to collapse
the CWM does not work
BACKUP does not make!
- can't mount /system
- can't mount backup path
- can't open /cache/recovery/last_install
thanks
Regards mersad