There is no root specifically for V 11.10.1.43 Android 4.4.2, Not even RootZenfone works for V43, but finally after searching for about three months I found a way to have a root for this tablet.
I have to remind you that I am no mod or programmer, I just read hundreds of comments and posts from others so all the credits goes to them that unfortunately I can't name them all.
Of course the main credit goes to @Shakalaka for making and providing RootZenfone.
Disclaimer:
* Warranty is void.
* I don’t guarantee that this will work.
* It maybe cause bad effects to your tablet.
* You are responsible for any damages or other issues that may arise directly or indirectly because of this.
* Very important: All your data and programs will be lost!
(If you like make a backup)
Steps:
1. Download Firmware 11.10.1.41 From Asus website.
Here’s the address: ASUS
This is important: Do not download other versions like 38 or 43, just 41, only 41!
Remember to download only your specific device firmware. Like WW only for WW or CN only for CN.
How to know that? Settings->About-> Software information.
So if you are WW, you have to download Version WW_V11.10.1.41 that is around one Gb.
2. The file you downloaded is a zip file. There is another zip file inside it with the same name. Extract it. So you have a zip file that there is folders and files inside it.
3. Rename this zip file (UL-K019-WW-11.10.1.41-user.zip) to MOFD_SDUPDATE.zip. Use exact naming with upper case and that under line(_).
4. Place MOFD_SDUPDATE.zip in to root of your micro sd card, no folders just in the root of micro sd.
5. Turn off your tablet, push and keep the power and volume + at the same time and after you see ASUS logo release them both. Now you are in “Droid boot”.
6. With Vol+ or Vol- navigate to “Recovery” then click Power to select. Your device will automatically update (actually downgrade) to V 11.10.1.41 that you can Root.
7. Go to Settings--> Security--> enable “Unknown sources”.
8. Download RootZenfone 1.4.6.8r form here or sakalaka's own website here and install it. Disable and forget WiFi and go to Airplane Mode. Open RootZenfone and click to root. After 10 seconds reboot your device.
9. Very important: After rooting make sure RootZenfone is in “survival mode activated” if not click to activate.
The whole concept is this:
TO ENABLE THE ROOT TO REMAIN AFTER UPDATE!
So make sure it’s on survival mode or all you did would be useless.
10. If You did all right, now you have a V41 Rooted tablet. Turn on WiFi an check for Update. There will be an Update for V43 that is around 28 Megs. Update.
Only update OTA
DO NOT update offline to V43!
11. If tablet didn’t find the update just do a factory reset then update will be there.
12. Voila, Rooted FE375CG 11.10.1.43
Works
It's works for me, thanks a lot :good:
I am now on 4.4.2 on my K019 and it's root.
Do think there is a way to install Lollipop ont it and stay root ?
garnner1 said:
It's works for me, thanks a lot :good:
I am now on 4.4.2 on my K019 and it's root.
Do think there is a way to install Lollipop on it and stay root ?
Click to expand...
Click to collapse
Happy that my post was helpful.
Well, about Lollipop I'm sure that the Root won't remain after upgrade because it's totally different from KitKat.
Finding Root for Lollipop is another matter, that I think is very probable. Of course still we have to wait a little more for Lollipop itself.
Good Luck
It works
Thanks for the root method.
It works perfectly for me. I've updated the firmware 11.10.1.43 and the root is always there.
Titanium Bakup is up and perfectly running.
jipijyp said:
Thanks for the root method.
It works perfectly for me. I've updated the firmware 11.10.1.43 and the root is always there.
Titanium Bakup is up and perfectly running.
Click to expand...
Click to collapse
:good:
cadusir said:
:good:
Click to expand...
Click to collapse
hi guys...
can u help me?
i have asus fonepad 8 ef380cg
i want root & install costume rom
who can helpme?
Root FE380CG
server231 said:
hi guys...
can u help me?
i have asus fonepad 8 ef380cg
i want root & install costume rom
who can helpme?
Click to expand...
Click to collapse
I think it's FE380CG and not ef380cg.
On this thread maybe: http://forum.xda-developers.com/showthread.php?t=2697931
or this one : http://forum.xda-developers.com/showthread.php?t=2250124
Great work.
I would love to have rooted K019/Fonepad7 on lollipop. Any news?
zardoz77 said:
Great work.
I would love to have rooted K019/Fonepad7 on lollipop. Any news?
Click to expand...
Click to collapse
Unfortunately not yet, but there is a strong rumor that we will get lollipop sooner or later.
none
What is root micro sd card? Plss help
Lollipop for K019 / FE375CG is out now. Someone already any ideas howto root that mother?
zardoz77 said:
Lollipop for K019 / FE375CG is out now. Someone already any ideas howto root that mother?
Click to expand...
Click to collapse
That was a very good news!
Not yet but i will look for it. Actually "maybe" it's going to be easier to root Lollipop on this device.
Is there any TWRP or CWM custom recovery available for this tab? i really need it.. can anyone provide me that?
Lollipop
is there anyway to root V12.14.3.12 lollipop? really need this!
still can not root with FE375CG (K019) after upgrade to Lollipop 5.0, anyone help?
Thanks
hi. first sorry my bad eng.
2- i root may tab and updated to (11.10.1.43). tab model is FE375CG K019 BUT XMODGAMES NOT WORK AND ERORR "Oops mod dosen't work now please try the 4 steps" I try everything but no chance plz help i want play clash of clan with Xmodgames.
hi. First sorry my bad eng.
2- i root may tab and updated to (11.10.1.43). Tab model is fe375cg k019 but xmodgames not work and erorr "oops mod dosen't work now please try the 4 steps" i try everything but no chance plz help i want play clash of clan with xmodgames.a
Click to expand...
Click to collapse
heeelllppppppp!!
kolng said:
hi. first sorry my bad eng.
2- i root may tab and updated to (11.10.1.43). tab model is FE375CG K019 BUT XMODGAMES NOT WORK AND ERORR "Oops mod dosen't work now please try the 4 steps" I try everything but no chance plz help i want play clash of clan with Xmodgames.
Click to expand...
Click to collapse
Hi,
Xmodgames does not support Bluestacks(or other Android emulators)/ASUS zenfone 5(or other intel-based processors)/X86/Samsung enforcing devices with Android Lollipop at present(Samsung enforcing solution please refer to NO.18). We are working on that now. Please be patient.
Source: XModGames Website FAQ
cadusir said:
There is no root specifically for V 11.10.1.43 Android 4.4.2, Not even RootZenfone works for V43, but finally after searching for about three months I found a way to have a root for this tablet.
I have to remind you that I am no mod or programmer, I just read hundreds of comments and posts from others so all the credits goes to them that unfortunately I can't name them all.
Of course the main credit goes to @Shakalaka for making and providing RootZenfone.
Disclaimer:
* Warranty is void.
* I don’t guarantee that this will work.
* It maybe cause bad effects to your tablet.
* You are responsible for any damages or other issues that may arise directly or indirectly because of this.
* Very important: All your data and programs will be lost!
(If you like make a backup)
Steps:
1. Download Firmware 11.10.1.41 From Asus website.
Here’s the address: ASUS
This is important: Do not download other versions like 38 or 43, just 41, only 41!
Remember to download only your specific device firmware. Like WW only for WW or CN only for CN.
How to know that? Settings->About-> Software information.
So if you are WW, you have to download Version WW_V11.10.1.41 that is around one Gb.
2. The file you downloaded is a zip file. There is another zip file inside it with the same name. Extract it. So you have a zip file that there is folders and files inside it.
3. Rename this zip file (UL-K019-WW-11.10.1.41-user.zip) to MOFD_SDUPDATE.zip. Use exact naming with upper case and that under line(_).
4. Place MOFD_SDUPDATE.zip in to root of your micro sd card, no folders just in the root of micro sd.
5. Turn off your tablet, push and keep the power and volume + at the same time and after you see ASUS logo release them both. Now you are in “Droid boot”.
6. With Vol+ or Vol- navigate to “Recovery” then click Power to select. Your device will automatically update (actually downgrade) to V 11.10.1.41 that you can Root.
7. Go to Settings--> Security--> enable “Unknown sources”.
8. Download RootZenfone 1.4.6.8r form here or sakalaka's own website here and install it. Disable and forget WiFi and go to Airplane Mode. Open RootZenfone and click to root. After 10 seconds reboot your device.
9. Very important: After rooting make sure RootZenfone is in “survival mode activated” if not click to activate.
The whole concept is this:
TO ENABLE THE ROOT TO REMAIN AFTER UPDATE!
So make sure it’s on survival mode or all you did would be useless.
10. If You did all right, now you have a V41 Rooted tablet. Turn on WiFi an check for Update. There will be an Update for V43 that is around 28 Megs. Update.
Only update OTA
DO NOT update offline to V43!
11. If tablet didn’t find the update just do a factory reset then update will be there.
12. Voila, Rooted FE375CG 11.10.1.43
Click to expand...
Click to collapse
Hallo Cadusir!
Trank You for your very Helpfull Tuturial to Root Fonepad7!
I have do a Mistake! I have rooted my fonepad with your tuturial with Firmware .41! But then the fould, i have make the System to that what i want, - i have ereased and moved many apps, and all fine! But when i try first time OTA-Update, the Update was found(How You say, it was around 28Megabytes), and as i try to install, it failed! Update-Routine starts, find Update-Package and beginn install, but than Update Abort!? Since that, Fonepad dont find anymore the OTA-Update when i try! I think, i had making first the root on .41, second Update to .43, and THEN Delete/Move apps and make the System i want!
My Question: You have writen in the tuturial, dont make offline-update! Can You say why! Is only the root gone after offline-update, or dont go offline-update at all!? And Perhabs You have a Solution!
Many Thanks to You!
rose
Related
Hi everyone!
moving forward from my beloved HTC Desire Z that worked so well since few month ago, now i got an awesome LG G3 - D855 with stock Lollipop 5.0 [BUILD: LRX21R.A1421650137]
So, it takes just 2 weeks to make me say "This is f***ing annoying, damn! I need my device to be rooted!" and make me look for some root method for this phone.
Now, i saw different ways to do that, and i'm trying to figure out which one is the best compromise between complexity/time that it takes/safety, and which one can be used with the different versions of android.
Here it is what i found:
1 - LG One-Click Root
2 - LG Root Script
3 - PurpleDrake
4 - StumpRoot or StumpRoot on XDA
5 - TowelRoot
6 - Bump
Well, I'm not a newbye on rooting devices ( as I said, i come from an HTC with HBoot and so on.. ), but i'm more confident if i can understand what a script does instead of simply doing a procedure blindfolded..
Can someone quickly tell me some infos, or give me some directions please?
As always, thanks in advance
http://forum.xda-developers.com/lg-g3/development/tool-dp-root-tool-to-root-lg-devices-t3075007 Go with this one. Then flashify some recoveryand flash on!
Thanks (again) ymcc, i will look into this!
Well, i'm close to root my phone finally.. I just have a question about the version of twrp i should use: I got "twrp-2.8.7.0_d855-bumped.zip", but i don't know if the root method that ymcc told me "bumps" my phone.. can someone please help me whit this?
Just to recap, i need to:
1 - get all the files/apps/software i need
2 - enable usb debugging and run "V2+DP+ROOT"
3 - Install some SuperSU app ( any advice is welcome )
4 - Install and run flashify to flash "twrp-2.8.7.0_d855-bumped.zip"
Is this ok, or i should go for something else with AutoRec or so?
I also see there's a way to install twrp with the playstore app, is it working too?
I feel sorry and newbye with all this, but i'm confused by so many tools and methods posted almost everywhere.. one says just for kitkat, one says all os versions, one says just bumped phones, one says to do not use this but use that.. damn i'm screwed!
skui said:
Well, i'm close to root my phone finally.. I just have a question about the version of twrp i should use: I got "twrp-2.8.7.0_d855-bumped.zip", but i don't know if the root method that ymcc told me "bumps" my phone.. can someone please help me whit this?
Just to recap, i need to:
1 - get all the files/apps/software i need
2 - enable usb debugging and run "V2+DP+ROOT"
3 - Install some SuperSU app ( any advice is welcome )
4 - Install and run flashify to flash "twrp-2.8.7.0_d855-bumped.zip"
Is this ok, or i should go for something else with AutoRec or so?
I also see there's a way to install twrp with the playstore app, is it working too?
I feel sorry and newbye with all this, but i'm confused by so many tools and methods posted almost everywhere.. one says just for kitkat, one says all os versions, one says just bumped phones, one says to do not use this but use that.. damn i'm screwed!
Click to expand...
Click to collapse
That's fine. Get DP Root Tool. Connect your device with enabled USB debugging to computer with installed LG drivers. Click to root.
Get SuperSU app by Chainfire. You can get it on Google Play.
Flash the mentioned TWRP and you are done.
For the TWRP from the Play Store, that's only the app that manages the recovery(for scheduling tasks if you wish...). It's not needed. You need to flash the recovery you mentioned with flashify or manually with adb if you prefer.
many many tnx
I'm coming from the Samsung ACE 2 community and I will also get my LG tomorrow. At the moment I'm a little bit confused because this device section is so big, there are so many root versions, kernels, roms etc..... compared to the ACE2 section.
Of course I will install a custom rom on my phone. (BlissPop at the beginning)
So is it ok, if I'm doing this in this order?
1)rooting with "DP Root Lg"
2)install SuperSU from Play Store
3)install Flashify from PlayStore
4)flash the recovery image
5)reboot to recovery
6)backup efs
7)wipe, install new rom, gapps etc....
But I just saw this: . Is this relevant for me?
Greetings Samuel
S.AMU said:
I'm coming from the Samsung ACE 2 community and I will also get my LG tomorrow. At the moment I'm a little bit confused because this device section is so big, there are so many root versions, kernels, roms etc..... compared to the ACE2 section.
Of course I will install a custom rom on my phone. (BlissPop at the beginning)
So is it ok, if I'm doing this in this order?
1)rooting with "DP Root Lg"
2)install SuperSU from Play Store
3)install Flashify from PlayStore
4)flash the recovery image
5)reboot to recovery
6)backup efs
7)wipe, install new rom, gapps etc....
But I just saw this: . Is this relevant for me?
Greetings Samuel
Click to expand...
Click to collapse
The steps you metioned will work. About the DP Root I'm not sure if it will auto flash SuperSU app but it doesn't really matter, you will check that after you run it.
As for the bump, it's the way of signing the image(boot, recovery) so the LG bootloader is able to boot it without tripping the security errors. The recovery image you will flash (twrp-2.8.7.0_d855-bumped.zip, mentioned by the guy above) is as it says bumped.
NatusVincere said:
The steps you metioned will work. About the DP Root I'm not sure if it will auto flash SuperSU app but it doesn't really matter, you will check that after you run it.
As for the bump, it's the way of signing the image(boot, recovery) so the LG bootloader is able to boot it without tripping the security errors. The recovery image you will flash (twrp-2.8.7.0_d855-bumped.zip, mentioned by the guy above) is as it says bumped.
Click to expand...
Click to collapse
Ok, thank you. :good:
So I'm ready to go tomorrow
S.AMU said:
I'm coming from the Samsung ACE 2 community and I will also get my LG tomorrow. At the moment I'm a little bit confused because this device section is so big, there are so many root versions, kernels, roms etc..... compared to the ACE2 section.
Of course I will install a custom rom on my phone. (BlissPop at the beginning)
So is it ok, if I'm doing this in this order?
1)rooting with "DP Root Lg"
2)install SuperSU from Play Store
3)install Flashify from PlayStore
4)flash the recovery image
5)reboot to recovery
6)backup efs
7)wipe, install new rom, gapps etc....
But I just saw this: . Is this relevant for me?
Greetings Samuel
Click to expand...
Click to collapse
For the next person reading this thread:
Instaling TWRP with flashify didn't worked. It gave me an red and blue blinking LED when I wanted to enter recovery. Instead I used this, because they say its for firmware version 20h and I had this version.
i want to downgrade 6.0 to 5.0 for xposed and something.
please help me.
ze550ml
you can follow steps on this link, it works for me
MOD Edit:
This has the potential to brick your device. Use at you're own discretion.
http://www.asus.com/zentalk/forum.php?mod=viewthread&tid=79480&highlight=downgrade
on ze551ml I just followed the unbricking guides (xFSTK, AFT)
luthfanos said:
you can follow steps on this link, it works for me http://www.asus.com/zentalk/forum.php?mod=viewthread&tid=79480&highlight=downgrade
Click to expand...
Click to collapse
dont know why. but i tried this and dont work. when reboot to bootloader. my phone have blank screen.
VinzNguyen said:
dont know why. but i tried this and dont work. when reboot to bootloader. my phone have blank screen.
Click to expand...
Click to collapse
did you flash the dnx and the ifwi also the droidboot for ze550ml?
This title is misleading. It's not a "how-to" thread. And it doesn't even belong to the general section, but rather in the questions section.
Sent from my Sony E6553 using XDA Labs
luthfanos said:
did you flash the dnx and the ifwi also the droidboot for ze550ml?
Click to expand...
Click to collapse
yesss
VinzNguyen said:
dont know why. but i tried this and dont work. when reboot to bootloader. my phone have blank screen.
Click to expand...
Click to collapse
Unlock with ZF2_one_click_unlock_by_sorg_v2
Just adb sideload rom.zip dont work to downgrade to .184 firmware?
VinzNguyen said:
dont know why. but i tried this and dont work. when reboot to bootloader. my phone have blank screen.
Click to expand...
Click to collapse
same issue for me too, after restarting to bootloader, stuck at black screen. dont know what to do
This MAY brick your phone. DO NOT USE you can unbrick with this guide http://forum.xda-developers.com/zenfone2/general/guide-brick-soft-hard-bricked-zenfone-2-t3284256
OP be careful of what you do to your device. I would research it more before jumping into anything, because you do have a potential to brick the device.
Thanks
Wolf
Why return to 5.0 só fast...is more easy wait for oficial ota of 6.0.1 and do adb sideload!
I want to downgrade as well, I've found several guides, but I'm afraid I'll brick my phone.
I saw in one place that sideloading the stock 5.0 firmware from the asus website could work... would this be a valid solution? Would it be as simple as sideload with adb the stock 5.0 firmware, if I'm in the 6.0 already?
zch_fernando said:
I want to downgrade as well, I've found several guides, but I'm afraid I'll brick my phone.
I saw in one place that sideloading the stock 5.0 firmware from the asus website could work... would this be a valid solution? Would it be as simple as sideload with adb the stock 5.0 firmware, if I'm in the 6.0 already?
Click to expand...
Click to collapse
BlackForward said:
Hi, I do not speak English very well, but I'll try.
First go to the website of Asus, and download the firmware .. 184 or this link (http://dlcdnet.asus.com/pub/ASUS/Ze...user.zip?_ga=1.147549438.850793534.1463019251) and put the external SD Card!!!
NOTE: If your bootloader is similar to the image (with the blue letters ..), you just need to step 3 of this my turorial
ht*tp://www*androidheadlines*com/wp-content/uploads/2015/05/asus-zenfone-2-google-howto-1.jpg (remove "*" again^^)
1. Go to this page (https://www.techmesto.com/root-zenfone-2/) and follow the steps of the second method..
1.1 Download Z00A_WW_2.20.40.184 version (https://mega.co.nz/#F!k4MHiAgL!dVuOKeH3eokcwPSNI79ffw)
1.2 Download and extract FlashTools (http://forum.xda-developers.com/attachment.php?attachmentid=3301263&d=1431011927)
1.3 Extract Z00A_WW_2.20.40.184_system_w_root.zip (for step 1.1) and put the "system.img" in the folder of FlashTools together with "boot.img", "droidboot.img" and "recovery.img"
2. Now follow the steps of the second method (https://www.techmesto.com/root-zenfone-2/), from step 7 to 11;
3. Also I was stuck in the bootloader after this procedure... BUT, you need to download this file (the first method): http://www.mediafire.com/download/v6m7n9j0gqins9b/CWM_Zenfone_2_Intel.zip;
3.1 And follow the steps from 1 to 9 (the first method): https://www.techmesto.com/root-zenfone-2/... EXCEPT: The steps include the root (you do not need the root ..)
3.2 When you are already in CWM recovery, only install the firmware 184 (of start.. of Asus) which is in the external SD Card ... and end ^^.
3.3 I recommend wipe data / factory after starting the device first time...
I have helped
Click to expand...
Click to collapse
Try this one ^ It did worked for me, just make sure you read the tutorial carefully so you won't mess up your phone.
Flynhx said:
Try this one ^ It did worked for me, just make sure you read the tutorial carefully so you won't mess up your phone.
Click to expand...
Click to collapse
Thank you!!! This worked!
I got into boot loop, but I did factory reset, and everything is good as new!
The only weird thing... the Mail app (Asus email) is missing. I found somewhere the apk file, and I did a sideload of it, and it works. But if I check on the computer the Google Play store, it says that the app is incompatible with my device...
zch_fernando said:
Thank you!!! This worked!
I got into boot loop, but I did factory reset, and everything is good as new!
The only weird thing... the Mail app (Asus email) is missing. I found somewhere the apk file, and I did a sideload of it, and it works. But if I check on the computer the Google Play store, it says that the app is incompatible with my device...
Click to expand...
Click to collapse
Glad that it worked for you too!
Bootloop is normal as seen on the tutorial.
I think that's normal since Asus will replace their default mail app to Gmail once MM final is release. same goes for my phone, Asus Mail doesn't come preinstalled.
Sent from my ASUS_Z00AD using XDA-Developers mobile app
Flynhx said:
Try this one ^ It did worked for me, just make sure you read the tutorial carefully so you won't mess up your phone.
Click to expand...
Click to collapse
Wasted two hours trying to figure how to combine the .bin files into system.img file and still didn't find it.
They were not combined automatically upon extracting them. Used Winrar and 7-zip.
I'm on beta. I only wanted to move to CyanogenMod.
Someone please show me the way.
Hi everyone. I am new and I agree that I am complete noob in this field. I have never did any update to my stock vibe p1 ROM because it runs very smoothly and I never encountered a single issue like other users had. Now I want to just Root it but I don't want any upgrades( in terms of version update). I know that this question may have been answered earlier but all the listed method is so confusing. Can anyone please just put the step by step instruction on how to root my vibe p1 and please share the link of the necessary files in this thread. I am sorry for wasting your time but I need to root it to gain access to my network settings. Thanks in advance. :angel:
VIPNEXXT said:
Hi everyone. I am new and I agree that I am complete noob in this field. I have never did any update to my stock vibe p1 ROM because it runs very smoothly and I never encountered a single issue like other users had. Now I want to just Root it but I don't want any upgrades( in terms of version update). I know that this question may have been answered earlier but all the listed method is so confusing. Can anyone please just put the step by step instruction on how to root my vibe p1 and please share the link of the necessary files in this thread. I am sorry for wasting your time but I need to root it to gain access to my network settings. Thanks in advance. :angel:
Click to expand...
Click to collapse
Try Kingo Root.
All you need is an laptop or pc, or you could try Kingo Root apk file.
Look on uncle Google for this app.
Good luck.
Send from my Lenovo P1 Vibe Pro with 3 Gb of RAM and 32 Gb of Internal Storage.
stympy said:
Try Kingo Root.
All you need is an laptop or pc, or you could try Kingo Root apk file.
Look on uncle Google for this app.
Good luck.
Send from my Lenovo P1 Vibe Pro with 3 Gb of RAM and 32 Gb of Internal Storage.
Click to expand...
Click to collapse
Genie root, kingoroot , vroot and many other I tried and all of them failed. Thanks for reply grandma.
VIPNEXXT said:
Genie root, kingoroot , vroot and many other I tried and all of them failed. Thanks for reply grandma.
Click to expand...
Click to collapse
You could tell this important information in your o.p. so we can skip this step.
Now... write here what your system is, like what is written in: Settings/About phone/Device information/Build number.
What you have to do is to read some articles from here: http://forum.xda-developers.com/vibe-p1/development/qpst-flashing-vibeui-3-1-s272-rom-t3386650
I think, if you dont know what to do, go to someone who knows and can help you.
Good Luck.
stympy said:
Try Kingo Root.
All you need is an laptop or pc, or you could try Kingo Root apk file.
Look on uncle Google for this app.
Good luck.
Send from my Lenovo P1 Vibe Pro with 3 Gb of RAM and 32 Gb of Internal Storage.
Click to expand...
Click to collapse
stympy said:
You could tell this important information in your o.p. so we can skip this step.
Now... write here what your system is, like what is written in: Settings/About phone/Device information/Build number.
What you have to do is to read some articles from here: http://forum.xda-developers.com/vibe-p1/development/qpst-flashing-vibeui-3-1-s272-rom-t3386650
I think, if you dont know what to do, go to someone who knows and can help you.
Good Luck.
Click to expand...
Click to collapse
Thanks for reply. That is the exact thing I meant when i called myself noob. My build is p1a_42_s137_151028_ROW. I did mentioned I got confused though I know this is not a new topic. I think the process (in the link) is for upgrades and what I want is just root because I never got a 100% satisfied user after any upgrades let it be via ota(starting with 30mb patch) or custom Row. My handset works perfectly fine. No lag no heating , no battery draining, etc. I want to root because I want to tweak network settings which is not possible with non rooted mode as SQL is not accessable. Sorry i was not able to provide whole info but I truly don't use blogs or social sites so I lack the idea.
VIPNEXXT said:
Thanks for reply. That is the exact thing I meant when i called myself noob. My build is p1a_42_s137_151028_ROW. I did mentioned I got confused though I know this is not a new topic. I think the process (in the link) is for upgrades and what I want is just root because I never got a 100% satisfied user after any upgrades let it be via ota(starting with 30mb patch) or custom Row. My handset works perfectly fine. No lag no heating , no battery draining, etc. I want to root because I want to tweak network settings which is not possible with non rooted mode as SQL is not accessable. Sorry i was not able to provide whole info but I truly don't use blogs or social sites so I lack the idea.
Click to expand...
Click to collapse
Tell me one thing!
When you tried to root your phone with kingo root tool, did you activated USB Debugging option from developer section ?
If not, activate this option from developer option and try again.
To activate this option you must go to : Settings/About phone/Device information/Build number and press fast many times on it till developer tab is activated.
Go to Settings/Developer options and activate the option from there.
Write here what is going on.
stympy said:
Tell me one thing!
When you tried to root your phone with kingo root tool, did you activated USB Debugging option from developer section ?
If not, activate this option from developer option and try again.
To activate this option you must go to : Settings/About phone/Device information/Build number and press fast many times on it till developer tab is activated.
Go to Settings/Developer options and activate the option from there.
Write here what is going on.
Click to expand...
Click to collapse
Yes sir I did that via USB connect option. Did anyone had success with kingoroot? But they did not mention vibe p1 in their support list. Thanks for quick reply.
VIPNEXXT said:
Yes sir I did that via USB connect option. Did anyone had success with kingoroot? But they did not mention vibe p1 in their support list. Thanks for quick reply.
Click to expand...
Click to collapse
you are right the root for this device is not avialable by kingoroot.they r actually working on it , may be in future we will get it.
There is a bootloader lock on the phone. Applications is useless. The bootloader must first be unlocked, or root application must be installed on the rom. The best solution for you is to unlock the bootloader lock and install twrp. Please see the following page:
https://forum.xda-developers.com/vibe-p1/development/qpst-flashing-vibeui-3-1-s272-rom-t3386650
Fatih Firinci said:
There is a bootloader lock on the phone. Applications is useless. The bootloader must first be unlocked, or root application must be installed on the rom. The best solution for you is to unlock the bootloader lock and install twrp. Please see the following page:
https://forum.xda-developers.com/vibe-p1/development/qpst-flashing-vibeui-3-1-s272-rom-t3386650
Click to expand...
Click to collapse
That entire process is for unlocking the bootloader? Let's say I have done that but how can I get rooted without updating my raw row?
VIPNEXXT said:
That entire process is for unlocking the bootloader? Let's say I have done that but how can I get rooted without updating my raw row?
Click to expand...
Click to collapse
Well I can only say that with my rom 288 the process was If you have already unlocked bootloader is using QFIL and selecting rawprogram_twrp.xml put supersu zip on your sd card boot into twrp recovery and install supersu zip.
VIPNEXXT said:
That entire process is for unlocking the bootloader? Let's say I have done that but how can I get rooted without updating my raw row?
Click to expand...
Click to collapse
It probably works with the qfil file of your same rom. You need to add and flash bootloader files into the same rom(data can be deleted). ROM version is not important for the bootloader file. If the process is successful, you can install twrp and supersu.zip
S137 qfil rom:
https://drive.google.com/file/d/0B0xPm0R2ARggMHBTb3F5ZG1BRUE/view
This tutorial guides to successfully root Huawei Honor 6X. If your want to root your device successfully please read all steps and if you are rooting any device for the first time please read all note and go through each and every step slowly. After following this guide your device will be rooted and ready for any other advanced usage.
Note:
Rooting will void the warranty of your smartphone.
Please follow each and every step carefully to safely root your smartphone without bricking.
We will not be responsible if you brick your smartphone.
Take a backup of your stored files and possible full ROM before rooting.
Make sure you read all steps carefully before doing anything to your smartphone.
Rooting is not illegal but some illegal activities could be engaged after rooting your device.
If you brick your device please mention the issue in comment box we will help you as soon as possible.
Make sure your device is same as mentioned in the article’s title.
Please make sure your device bootloader successfully unlocked to unlock please follow this guide: Click here
Download
Recovery Files
SuperSU
Steps to flash TWRP
Make sure you have installed all the drivers of the Honor 6X.
Open and extract all files from the zip and open the .exe file.
The UI is in Chinese but you can read the recovery option.
Select recovery and Flash the recovery.
Wait untill the process in complete.
Reboot your device.
The process is complete you haver installed the custom recovery TWRP in your Honor 6X.
Root your smartphone
Place the SuperSU in your smartphone internal memory.
Reboot your smartphone in recovery mode. to reboot your smartphone in recovery mode first power off your smartphone then long press volume up + power button simultaneously until the Huawei logo appears
Flash the SuperSU.
Congratulation you have successfully rooted your Honor 6X.
The Guide for Root Huawei Honor 6X is complete.
Risks:
Your device could be hacked and will be more exploited for hacking.
You can screw up the device. (Don’t experiment with your device).
Please read the disclaimer in you want to in any case.
Try the tutorial at your own risk.
If you find any issue mention it in the comment box below.
This Guide Honor 6X Unlock Bootloader is 100% working
It's possible to debloat the stock rom after unlock bootloader, install twrp and root ??? no problem after debloat ???
Renaf2 said:
It's possible to debloat the stock rom after unlock bootloader, install twrp and root ??? no problem after debloat ???
Click to expand...
Click to collapse
You have to root the smartphone first
Suman117 said:
You have to root the smartphone first
Click to expand...
Click to collapse
It's ok here i have receive my honor 6x yesterday and my honor honor 6x bootloader ulocked , twrp installed and rooted ok no problem here
Debloat in the first time google apps (playgames, books, hangouts, etc...)
Renaf2 said:
It's ok here i have receive my honor 6x yesterday and my honor honor 6x bootloader ulocked , twrp installed and rooted ok no problem here
Debloat in the first time google apps (playgames, books, hangouts, etc...)
Click to expand...
Click to collapse
Buy a good case for that phone the screen is not scach resistance and can easily get a crack
Suman117 said:
Buy a good case for that phone the screen is not scach resistance and can easily get a crack
Click to expand...
Click to collapse
Thank you for this info
I have received my honor 6x with screen protector directly put on my phone when i open my new device box
This manufacturer is the same quality than meizu phones but little better of course
Renaf2 said:
Thank you for this info
I have received my honor 6x with screen protector directly put on my phone when i open my new device box
This manufacturer is the same quality than meizu phones but little better of course
Click to expand...
Click to collapse
Great
Instead of using the twrp tool provided. Is it safe to flash official TWRP image directly in bootloader mode?
marco_wack said:
I am running Android 7.0 with EMUI 5.0 on my 6X, but logically this recovery doesnt work cause its for MM. So i tried this https://forum.xda-developers.com/hu...ecovery-twrp-3-0-2-android-nougat-03-t3511937 recovery from P9 Lite forums, and it boots but i cant mount storage there. Would it be possible for u to update this TWRP to Nougat for us? If u need any files from the Nougat build reach me out or if you want to know how i installed it
Click to expand...
Click to collapse
How do you have ennui 5 on your 6x??
marco_wack said:
There is this website which lists all of the huawei updates. i downloaded the newest for our device there and installed the update.app (though i struggled a bit). but now i have a rooted emui 5.0 android 7.0 with system r/w and my only problem is that the recovery cant mount storage
Click to expand...
Click to collapse
can you send me screenshots of your emui 5??
marco_wack said:
There you go. Looks just like the same as emui 5.0 on any other Huawei device
Click to expand...
Click to collapse
is it true that is has now an app drawer?? can I have a screen shot of your home screen and the link also ?
marco_wack said:
Yes it has one , I'll add an image. As for link, which link do you mean? If you mean the one to install the update its quite tricky and took me a whole day to get it working and i think it's still a test build with some bugs (for example I can't get magazine unlock to work)
Click to expand...
Click to collapse
yep the installation link, well I can do that, does it have major bugs like dual sim working or other big bugs?
goodygoods said:
yep the installation link, well I can do that, does it have major bugs like dual sim working or other big bugs?
Click to expand...
Click to collapse
Link fot BLN-L21C432 is here:
HTML:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1277/g104/v75157/f1/full/update.zip
I can't test dual-sim, but i don't see any major bug, but some Huawei apps such Updater and File Manager are missing...the real problem is that we cannot already downgrade to Marshmallow due to the lack of rollback packages...downgrading in dload fails (i tested it yesterday)
Frytz said:
Link fot BLN-L21C432 is here: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1277/g104/v75157/f1/full/update.zip
I can't test dual-sim, but i don't see any major bug, but some Huawei apps such Updater and File Manager are missing...the real problem is that we cannot already downgrade to Marshmallow due to the lack of rollback packages...downgrading in dload fails (i tested it yesterday)
Click to expand...
Click to collapse
so you mean dual sim not working?? but if I reflash stock rom using dload will it work or not?
goodygoods said:
so you mean dual sim not working?? but if I reflash stock rom using dload will it work or not?
Click to expand...
Click to collapse
i mean i've only one sim + microsd. Reflashing stock will NOT work until Honor release a rollback package...so i don't reccomend to flash.
Frytz said:
i mean i've only one sim + microsd. Reflashing stock will NOT work until Honor release a rollback package...so i don't reccomend to flash.
Click to expand...
Click to collapse
oh I see,did you receive any updates or something?
marco_wack said:
The only bugs i can see so far are:
magazine unlock not working, cant get it to work no matter what
sometimes the background of the notification shade is black instead of showing a darkened background of whats behind
everything else is fine, though i dont know about dual sim
Click to expand...
Click to collapse
damn still risky eh, but have you ever received an update ever since? if they give updates then I'll try this rom
marco_wack said:
I checked with HiSuite on PC but it said its the latest version. It says its a developer version doe. And since it's a pre build i guess there is not OTA Update or atleast i couldnt find one so no i didnt receive one
Click to expand...
Click to collapse
ok thank you very much for the info mate, gotta decide if I'd go with this or not ??
I installed 7.0 from the provided link and everything works perfectly. This phone is now super smooth, very quick and sips battery... huge difference! Feels better than my Moto Z.
Sent from my XT1650 using Tapatalk
marco_wack said:
Do you have the same bug like me? Magazine unlock not working and when you open the notification shade on homescreen and change brightness then the background of the shade will be black everywhere?
Click to expand...
Click to collapse
I do not have the shade problem you describe, but magazine unlock is not working for me either - not really a feature I'm interested in personally.
Sent from my XT1650 using Tapatalk
You Need From firmware.center / firmware / Motorola / Moto%20E4 / Stock / XT1766 /
SPERRY_SPRINT_NCQ26.69-48_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip Which Is Not For The XT1766 if You Flash This You Will Loose The Baseband And SoftBrick The Phone .
And From firmware.center / firmware / Motorola / Moto%20E4 / Stock / XT1766 /
XT1766_SPERRY_SPRINT_7.1.1_NCQ26.69-56_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip This One Have The Ratio And Modem And FsG images Of Your Phone Thats Why We Need It .
Lets Begin , if You Have This Phone You Had Noticed That After Upgrade To The Last Version The Ability To Add Apn And Modify Them And The Hotspot Wont Work Any More This Is Because The Locked Everything Up For No Reason Well Money Is the Reason , We need to Extract XT1766_SPERRY_SPRINT_7.1.1_NCQ26.69-56_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip in a folder and SPERRY_SPRINT_NCQ26.69-48_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
in other folder , you must know your way to flash servicefile.xml on linux or windows no details here and bootloader unlocked , well that is easy , now we have to put the files : the 2 OEM files , the 4 System Files , boot.img ,
{{{ bootloader "NO NEED" This Work Before Just Because v48 and v56 have the same bootloader version }}} , recovey.img from SPERRY_SPRINT_NCQ26.69-48_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip inside the folder that have the XT1766_SPERRY_SPRINT_7.1.1_NCQ26.69-56_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip firmware and replace those files , optional for rooting you can replace recovery.img with the Squid2 TWRP recovery.img file and The boot.img Patched Fixed F2FS kernel which is based in the stock firmware kernel sources that we are going to flash here and then flash supersu inside twrp , Well Thats It after Flashing This Downgrade Custom stock you will have back the ability to ADD apn's Again And Use The Hotspot included in the Stock Firmware , Cheers , Thanks To All The People Involved in the development for Perry Moto E4 Thanks Everybody i hope this help somebody with the XT1766. :laugh:
EDIT HELLO
Things Have Changed Dont Try To Downgrade Bootloader or The Phone Will Get Hard Bricked , Why well bootloader versions on new firmwares have been upgraded please check all the information on the Bootloader/Fastboot
MODE Of The Phone Which Version You Have , Now For Example If You Are On Version NCQS26.69-64-5 you will need SPERRY_SPRINT_NCQS26.69-64-5_cid50_XT1766-SS_7.1.1_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml full package then extract and now you will need SPERRY_SPRINT_NCQ26.69-48_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml extract it too , Now Just Move The 2 Oems Images And 4 System Images And Boot Image To SPERRY_SPRINT_NCQS26.69-64-5_cid50_XT1766-SS_7.1.1_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml Folder Next Look for RSD_Lite_Motorola_XML_To_Batch_Script on Google Download it And Watch The Video Of Rootjunky on how to use it. Very Simple Wish All Of You Luck And im Not Responsible Of Any Damage Of Your Phone Use This Guide On Your Own Terms.
ozmage said:
You Need From firmware.center / firmware / Motorola / Moto%20E4 / Stock / XT1766 /
SPERRY_SPRINT_NCQ26.69-48_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip Which Is Not For The XT1766 if You Flash This You Will Loose The Baseband And SoftBrick The Phone .
And From firmware.center / firmware / Motorola / Moto%20E4 / Stock / XT1766 /
XT1766_SPERRY_SPRINT_7.1.1_NCQ26.69-56_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip This One Have The Ratio And Modem And FsG images Of Your Phone Thats Why We Need It .
Lets Begin , if You Have This Phone You Had Noticed That After Upgrade To The Last Version The Ability To Add Apn And Modify Them And The Hotspot Wont Work Any More This Is Because The Locked Everything Up For No Reason Well Money Is the Reason , We need to Extract XT1766_SPERRY_SPRINT_7.1.1_NCQ26.69-56_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip in a folder and SPERRY_SPRINT_NCQ26.69-48_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
in other folder , you must know your way to flash servicefile.xml on linux or windows no details here and bootloader unlocked , well that is easy , now we have to put the files : the 2 OEM files , the 4 System Files , boot.img , bootloader , recovey.img from SPERRY_SPRINT_NCQ26.69-48_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip inside the folder that have the XT1766_SPERRY_SPRINT_7.1.1_NCQ26.69-56_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip firmware and replace those files , optional for rooting you can replace recovery.img with the Squid2 TWRP recovery.img file and The boot.img Patched Fixed F2FS kernel which is based in the stock firmware kernel sources that we are going to flash here and then flash supersu inside twrp , Well Thats It after Flashing This Downgrade Custom stock you will have back the ability to ADD apn's Again And Use The Hotspot included in the Stock Firmware , Cheers , Thanks To All The People Involved in the development for Perry Moto E4 Thanks Everybody i hope this help somebody with the XT1766. :laugh:
Click to expand...
Click to collapse
I flashed the Sprint firmware and had data working on my XT1766 after it got it's carrier update, the Sprint firmware does not soft brick the phone as I flashed it and can confirm it doesn't soft brick it, so you are incorrect in saying that.
I'm not sure if I did something wrong but after trying this, my phone kept saying, "phone stopped working". I had backed up my phone so I restored it. Any ideas on what might have happened?
dlinderaz said:
I'm not sure if I did something wrong but after trying this, my phone kept saying, "phone stopped working". I had backed up my phone so I restored it. Any ideas on what might have happened?
Click to expand...
Click to collapse
Yeah, don't try to restore system apps. Phone app has some quirks, it's in oem. There are oem hide xml files and so on. Why try to restore phone?
madbat99 said:
Yeah, don't try to restore system apps. Phone app has some quirks, it's in oem. There are oem hide xml files and so on. Why try to restore phone?
Click to expand...
Click to collapse
I restored the entire thing after flashed the indicated files causing the error message.
dlinderaz said:
I restored the entire thing after flashed the indicated files causing the error message.
Click to expand...
Click to collapse
Oh, I never tried this method. I used rsd lite to flash the firmware (the one op says will brick you, it didn't by the way). After flashing new firmware I restored only data, nothing system or boot related, and have had no issues.
madbat99 said:
Oh, I never tried this method. I used rsd lite to flash the firmware (the one op says will brick you, it didn't by the way). After flashing new firmware I restored only data, nothing system or boot related, and have had no issues.
Click to expand...
Click to collapse
Thank you so much for the info. I'll give that a try tomorrow. I appreciate your time and help.
dlinderaz said:
Thank you so much for the info. I'll give that a try tomorrow. I appreciate your time and help.
Click to expand...
Click to collapse
Keep in mind I have the virgin mobile version (sprint xt1766). Don't know which one you have. Some have had trouble with rsdlite on Windows 10, it worked fine for me though.
I used rsdlite from here
The newest one, 6.2.4 I think
Apn Xt1766
I just want to add apn and want to use hot spot again
As the phone is updated on latest build ..
I don't want the root access..
What's should I try then from previous build , can anyone
Guide me easy steps plz.
Xt1766 how to get working apn
Will anyone confirm
danishamini.saifi said:
Will anyone confirm
Click to expand...
Click to collapse
The steps are there. Just don't use the root part if you don't want root. Once you switch the files, flash the service file.xml with rsdlite.
madbat99 said:
The steps are there. Just don't use the root part if you don't want root. Once you switch the files, flash the service file.xml with rsdlite.
Click to expand...
Click to collapse
Thanks, ill try and share the result.
I've tested it.. It worked for me but there is an issue
With this method occurred as well..
While Turing on the phone " BAD KEY" msg pops up on
Black display for 4-5 seconds and then mobile shows Motorola logo...
Now what is suppose to be done to get rid off BAD KEY msg.
danishamini.saifi said:
I've tested it.. It worked for me but there is an issue
With this method occurred as well..
While Turing on the phone " BAD KEY" msg pops up on
Black display for 4-5 seconds and then mobile shows Motorola logo...
Now what is suppose to be done to get rid off BAD KEY msg.
Click to expand...
Click to collapse
That's normal if you unlock the bootloader. Flash the no verity opt encrypt, or magisk, and it will change from bad key to n/a. But there will always be a message if you unlock the bootloader.
I know you said you don't need root, so that bad key message is there to stay.
madbat99 said:
That's normal if you unlock the bootloader. Flash the no verity opt encrypt, or magisk, and it will change from bad key to n/a. But there will always be a message if you unlock the bootloader.
I know you said you don't need root, so that bad key message is there to stay.
Click to expand...
Click to collapse
oh... i got it, thanks...
just one thing more please, if i go towards rooting the phone as well, will this be removed or N/A or something will be there?
danishamini.saifi said:
oh... i got it, thanks...
just one thing more please, if i go towards rooting the phone as well, will this be removed or N/A or something will be there?
Click to expand...
Click to collapse
N/A will be there. But you can flash a new boot logo to kinda hide it. Instead of a black screen, any logo you want, maybe with a white strip at the top to hide it. I'll get you a link.
Here are some good ones. https://forum.xda-developers.com/mo...om-boot-logos-converted-t3759320/post75787882
And here is the guide to make your own
https://forum.xda-developers.com/moto-e4/how-to/replace-n-boot-image-t3687212/post74118155
@madbat99
Everything you shared was perfect I made my own logo to hide bad key apn working ..
Now I want to have thebroot access in my phone XT1766..
TWRP IS ALREADY ISTALLED ON THE PHONE AS I AM FLASHING LOGOS..
WHAT SHOULD I INSTALLED TO GET ROOT ACCESS ..
SUPER USER ETC.. PLZ SHARE WITH ME..
and the main reason to have the root access is, I want to block or disable OTA update ..
Plz confirm, how will it be possible ..as I downgraded to get working APN But phone updated again now.
I want the phone to be stopped from being updated..
Plz help me out fixing this..
Thanks
danishamini.saifi said:
@madbat99
Everything you shared was perfect I made my own logo to hide bad key apn working ..
Now I want to have thebroot access in my phone XT1766..
TWRP IS ALREADY ISTALLED ON THE PHONE AS I AM FLASHING LOGOS..
WHAT SHOULD I INSTALLED TO GET ROOT ACCESS ..
SUPER USER ETC.. PLZ SHARE WITH ME..
and the main reason to have the root access is, I want to block or disable OTA update ..
Plz confirm, how will it be possible ..as I downgraded to get working APN But phone updated again now.
I want the phone to be stopped from being updated..
Plz help me out fixing this..
Thanks
Click to expand...
Click to collapse
Just don't accept the update. You can root by flashing magisk. You will still receive update notification. You'll need to disable the moto update app. I forget which one exactly. But your phone shouldn't be able to do ota updates once you are rooted with twrp installed. The update will fail.
here is the root thread.
madbat99 said:
Just don't accept the update. You can root by flashing magisk. You will still receive update notification. You'll need to disable the moto update app. I forget which one exactly. But your phone shouldn't be able to do ota updates once you are rooted with twrp installed. The update will fail.
here is the root thread.
Click to expand...
Click to collapse
Thank you. I wish I had known this. I had to flash the stock recovery, etc for the updates to work. A little bit of an unnecessary hastle.
dlinderaz said:
Thank you. I wish I had known this. I had to flash the stock recovery, etc for the updates to work. A little bit of an unnecessary hastle.
Click to expand...
Click to collapse
Ota updates will likely always fail if you have twrp, or have modified the system in any way. The ota performs many checks (assert props) to see if the system is clean. If any asserts fail, the ota will fail. Even restoring the stock recovery doesn't guarantee the ota will work.