Related
Hi fellow forum members!
I recently found great ROMS at Kevin's web storage. I tried them all and they work amazingly well except for one thing. When I make a call for a first time after a clean boot everything is fine. But when I make another call I can not hear anything nor the person I'm calling. After a reboot I have one shot again. Each time I want to call I need to reboot my phone. It only happens on CM 11 based GPROJ ROMS. Anyone encoutered this issue before? Any suggesting? Solutions?
Thanks, Zunex
nuraH6 said:
Quote:
Originally Posted by ShorelineDroid
Can anyone confirm the new nightly still has the call issue?
Alright, so after chatting with a CM maintainer we've been able to narrow it down to an upstream CM issue along with the phone not going into deep sleep. So, point is, no matter how many of our commits I revert it still won't fix the problem until CM fixes it on their end. I'm told it shouldn't take too long and will keep an eye on CM gerrit to see when an update is pushed into their code to fix these issues. So its not just PAC it's an LGOG gproj that sync'd to CM after 10/4.
Until the issue is resolved you can use the nightly 10/4 as it doesn't have the dialer or deep sleep issues and I will update when I hear more.
Click to expand...
Click to collapse
Same problem here on PAC-man ROM
I am facing the same issue with 10/13 nightly build. Its so frustrating to miss out so many important calls due to this call issue. They pulled back their 10/16 and 10/17 nightly build citing some major issue with the builds. Expecting a build asap with fixed call issue.
I had same problem. I was going back to CM snapshot-M11. This doesn't have call problem.
Is it fixed yet? Any news on this?
Updated today to cm-11-20141025-NIGHTLY-e975 but the calls bug is still there...
So, what should we do to solve this?
Fotonic said:
Updated today to cm-11-20141025-NIGHTLY-e975 but the calls bug is still there...
So, what should we do to solve this?
Click to expand...
Click to collapse
Thanks for the heads up. I don't know. I really don't wanna go back to stock because of dsp manager but this bug forces me to. Hope it gets fixed soon.
Reading This I found the solution to audio-caf problem. The solution is replace in system/lib/hw the library audio.primary.msm8960.so for a working one, I used the library from official M11 and now everything is OK. Attached is the library I used.
I installed the stock rom after this issus. I think the stock rom has a good battery life.
cabe2001 said:
Reading This I found the solution to audio-caf problem. The solution is replace in system/lib/hw the library audio.primary.msm8960.so for a working one, I used the library from official M11 and now everything is OK. Attached is the library I used.
Click to expand...
Click to collapse
Confirmed working!
Thanks cabe2001.
Does anyone have the skills to create a flashable zip that overwrites audio.primary.msm8960.so with a working version?
Is it as simple as deleting everything from a standard CM zip?
HI all! I just saw a test build from COMMOTIO for the E980! And it is LOLLIPOP! B74 is out now in their latest nightly experimental. Anyone who wants to test it just go to their download links!
I can't test it properly as I have F240. So anyone with E980 can test it!
Well I tried it. Smooth and good looking, though more stock than custom. Of course since I use F240, I have no sound and external SD is not being read.
MitoTakatori said:
Well I tried it. Smooth and good looking, though more stock than custom. Of course since I use F240, I have no sound and external SD is not being read.
Click to expand...
Click to collapse
How long did the rom take to boot up for you?
Nextjp87 said:
How long did the rom take to boot up for you?
Click to expand...
Click to collapse
Hmm. Around 5 - 6 minutes. It takes long but it's worth it.
If anyone can build/port a Lollipop kernel for F240, then it would be freaking awesome. Even the stock L ROM is gorgeous.
Links for those who are intrested:
Commotio Nightly Roms (Vanir based)
http://www.emccann.net/dho/3-Vanir-mirror/4-nighties/
5.0 GApps
http://www.emccann.net/dho/5-Gapps/
Downloading using my data can't wait.
BooYah Baby. It's installed on my E980.
Wipe data/factory reset
Install ROM
Then gapps
If phone will not Boot flash the fix from Optimus G3 ROM.
Main issue is no home button unlock
I'll try it now
Downloading, and I'll try it now
Madly waiting for F240 kernel for CM12.
still like stock,
very smoot user interface,
first boot take 2 minutes,
sdcard working, but when access google camera its force close.
Mine is e986 indonesia version
question
imansyaefulloh said:
still like stock,
very smoot user interface,
first boot take 2 minutes,
sdcard working, but when access google camera its force close.
Mine is e986 indonesia version
Click to expand...
Click to collapse
Is video playback and screen recording working?
HeatKevin said:
Is video playback and screen recording working?
Click to expand...
Click to collapse
Video playback not working,
I do not know where to access a screen recording, where is the screen recording menu?
Bugs I see so far:
Camera
Root
Crinos512 said:
Bugs I see so far:
Camera
Root
Click to expand...
Click to collapse
Flash SuperSu 2.30 Beta ( http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133 ) to fix Root....
:good:
Since it's just an experimental, expect BUGS and here and there not working. Anyone here that visits Chinese and Vietnamese forums may find updates for the F240?
So if im reading this right i can flash this on at&t e980 with twrp recovery? Just making sure.
beergenius said:
So if im reading this right i can flash this on at&t e980 with twrp recovery? Just making sure.
Click to expand...
Click to collapse
I use Philz Touch and it works well. It's for E980.
I know it is still early days, but anyone who has run this rom for 1 day , 'feels' any improvement in battery life? Project volta was touted as a big part of the lollipop update
Since the e980 has a CM12 device tree up there on Github, doesn't that mean anyone can compile the kernel to use with any CM build with it now? (The only CM I've built was Pac-man a few weeks back, so I'm fresh fish in this.) I know if I were going to go CM again I'd love to tweak some Lollipop with Pacman (love that one).
I just installed using cwm....camera not working, sound settings doesn't open so far....
Sent from my Optimus G Pro using XDA Free mobile app
thought this should help all of us F240 out there, at last, someone made a CM12 kernel for f240, got this from chinese F240 forum, according to the author its a custom job combining the official E980 CM12 ramdisk and cantata kernel, includes call Volume fix patch from wangsai008
recommend a clean wipe, install a cm12 rom and any 5.0 gapps (i used minimal ones), then apply this patch at last
i've installed on TWRP 2.8.1.0 with official E98x CM12, had no issues personally, sound, gps, youtube, deep sleep works fine, didnt test BT, your mileage may vary.
should work for all F240 variants, test and see
EDIT:updated 08/02/2015 to match current official CM12, should fix compatibility issues on newer nightlies , test and see(like deep sleep)
is Batery good ?
stapler85 said:
thought this should help all of us F240 out there, at last, someone made a CM12 kernel for f240, got this from chinese F240 forum, according to the author its a custom job combining the official E980 CM12 ramdisk and cantata kernel, includes call Volume fix patch from wangsai008
recommend a clean wipe, install a cm12 rom and any 5.0 gapps (i used minimal ones), then apply this patch at last
i've installed on TWRP 2.8.1.0 with official E98x CM12, had no issues personally, sound, gps, youtube, deep sleep works fine, didnt test BT, your mileage may vary.
should work for all F240 variants, test and see
Click to expand...
Click to collapse
Be wary friend, you lack sources and mod may remove your thread for that.
On another note, where can I get my hands on the official F240 ramdisk? I have been looking to support F240 devices with my kernel but have been unsuccessful thus far.
Snepsts said:
Be wary friend, you lack sources and mod may remove your thread for that.
On another note, where can I get my hands on the official F240 ramdisk? I have been looking to support F240 devices with my kernel but have been unsuccessful thus far.
Click to expand...
Click to collapse
...I successful with my kernel f240 ....blisspop & nightligh very good.
Snepsts said:
Be wary friend, you lack sources and mod may remove your thread for that.
On another note, where can I get my hands on the official F240 ramdisk? I have been looking to support F240 devices with my kernel but have been unsuccessful thus far.
Click to expand...
Click to collapse
yes i know but due to the sources in chinese and the download requires password it didnt seem easy to link to, i thought alot of people must be after it so i decided to share separately instead
as for official f240 ramdisk, not sure if 5.0 is even out, but mostly custom jobs like in Blisspop for f240 or the one i uploaded
stapler85 said:
yes i know but due to the sources in chinese and the download requires password it didnt seem easy to link to, i thought alot of people must be after it so i decided to share separately instead
as for official f240 ramdisk, not sure if 5.0 is even out, but mostly custom jobs like in Blisspop for f240 or the one i uploaded
Click to expand...
Click to collapse
I doubt the ramdisk has changed too heavily... It is still the same device
But okay, I'll dig around some more. Thank you!
---------- Post added at 06:42 AM ---------- Previous post was at 06:40 AM ----------
raknguyen said:
...I successful with my kernel f240 ....blisspop & nightligh very good.
Click to expand...
Click to collapse
You made a kernel for f240? Perhaps you can help me! How did you do it? Ramdisk changes? I already have a defconfig for f240.
report
First of all, thank you for your great work.
It's been working great with f240 so far until cm12 nightly 20150202.
But it is broken since 20150203, systemUI keep terminates.
update kernel please
theres 2 new roms by wangsai008 which updates f240 kernel on latest cm12 rom and newest Mokee version for f240
its not straight forward download and is in chinese, keep eyes peeled ill make a new thread soon.
updated kernel uploaded
stapler85 said:
thought this should help all of us F240 out there, at last, someone made a CM12 kernel for f240, got this from chinese F240 forum, according to the author its a custom job combining the official E980 CM12 ramdisk and cantata kernel, includes call Volume fix patch from wangsai008
recommend a clean wipe, install a cm12 rom and any 5.0 gapps (i used minimal ones), then apply this patch at last
i've installed on TWRP 2.8.1.0 with official E98x CM12, had no issues personally, sound, gps, youtube, deep sleep works fine, didnt test BT, your mileage may vary.
should work for all F240 variants, test and see
EDIT:updated 08/02/2015 to match current official CM12, should fix compatibility issues on newer nightlies , test and see(like deep sleep)
Click to expand...
Click to collapse
does this update fixes unclear voice issues/sometimes voice breakdown issues while in a call?also will this fix fast battery driain prblm for my f240l(blisspop 1.9v)?
The new Kernel 2.8 works very well.
regards[
QUOTE=stapler85;58095164]thought this should help all of us F240 out there, at last, someone made a CM12 kernel for f240, got this from chinese F240 forum, according to the author its a custom job combining the official E980 CM12 ramdisk and cantata kernel, includes call Volume fix patch from wangsai008
recommend a clean wipe, install a cm12 rom and any 5.0 gapps (i used minimal ones), then apply this patch at last
i've installed on TWRP 2.8.1.0 with official E98x CM12, had no issues personally, sound, gps, youtube, deep sleep works fine, didnt test BT, your mileage may vary.
should work for all F240 variants, test and see
EDIT:updated 08/02/2015 to match current official CM12, should fix compatibility issues on newer nightlies , test and see(like deep sleep)[/QUOTE]
krishna13 said:
does this update fixes unclear voice issues/sometimes voice breakdown issues while in a call?also will this fix fast battery driain prblm for my f240l(blisspop 1.9v)?
Click to expand...
Click to collapse
yes it has fix for the voice issues
stapler85 said:
yes it has fix for the voice issues
Click to expand...
Click to collapse
Still i have some issues
1.while im in call,proximity sensor(not sure what its called)not working and its gng to my contacts or battery saver option or some other app
2.no fast charge,its slow charging at the same time its draining fast too
3.sometimes i found its laggy.i mean when i want to switch between apps,while selecting the app switcher(on screen buttons)i need to touch 2 times.
4.screen flickering prblm.sometimes my screen fills with only one colour like orange or black.so i need to do a restart everytime.
can u fix these or atleast some of these
krishna13 said:
Still i have some issues
1.while im in call,proximity sensor(not sure what its called)not working and its gng to my contacts or battery saver option or some other app
2.no fast charge,its slow charging at the same time its draining fast too
3.sometimes i found its laggy.i mean when i want to switch between apps,while selecting the app switcher(on screen buttons)i need to touch 2 times.
4.screen flickering prblm.sometimes my screen fills with only one colour like orange or black.so i need to do a restart everytime.
can u fix these or atleast some of these
Click to expand...
Click to collapse
you have not either done a clean wipe to install rom and kernel
by that i mean wipe system, data dalvik cache etc then clean install CM12 rom, gapps then finally kernel, if you done that it shouldnt happen, if you are using f240
stapler85 said:
you have not either done a clean wipe to install rom and kernel
by that i mean wipe system, data dalvik cache etc then clean install CM12 rom, gapps then finally kernel, if you done that it shouldnt happen, if you are using f240
Click to expand...
Click to collapse
no.i did the same as above.moreover i did wipe system<cache <dalvik cache.installed blisspop rom and gapps.again i did wipe both caches and installed cm12 rom.still im facing call voice issues and proximity sensor issues.please suggest me other kernel for my f240l or a recently updated kernel of urs.thanku..
krishna13 said:
no.i did the same as above.moreover i did wipe system<cache <dalvik cache.installed blisspop rom and gapps.again i did wipe both caches and installed cm12 rom.still im facing call voice issues and proximity sensor issues.please suggest me other kernel for my f240l or a recently updated kernel of urs.thanku..
Click to expand...
Click to collapse
im confused, can you do fresh install from wipe and install cm12 ONLY, over write with blisspop then cm12 thats just asking for nightmare
i cant guarantee blisspop but the kernel was made partly from official CM12 rom(e980), even though blisspop is cm12 sourced, i still recommend backing up your blisspop rom, test with official cm12 from clean state, do not dirty install between different roms.
stapler85 said:
im confused, can you do fresh install from wipe and install cm12 ONLY, over write with blisspop then cm12 thats just asking for nightmare
i cant guarantee blisspop but the kernel was made partly from official CM12 rom(e980), even though blisspop is cm12 sourced, i still recommend backing up your blisspop rom, test with official cm12 from clean state, do not dirty install between different roms.
Click to expand...
Click to collapse
can u pls provide cm12 rom for my f240l.is that stable? also pls mention the steps for performing a clean install from blisspop 1.9.
@stapler85, mate any updates for this kernel?
MitoTakatori said:
@stapler85, mate any updates for this kernel?
Click to expand...
Click to collapse
A new rom has been released by wangsai for f240l.This rom has very good battery life & is very stable.It has double tap to wake,fast charge.Hope someone extract the kernal
http://www.yirom.com/handset/roms/710
LineageOS 14.1 has been started.
https://download.lineageos.org/d2tmo
I'm running latest nightly with no problems so far.
Sent from my SGH-T999 using XDA-Developers Legacy app
Awesome to see this. I'm waiting on a few things to wrap up but will updating my t999 ASAP.
Questions, which exact gapps did you use ? Does lineage have their own forums ?
toro143 said:
Awesome to see this. I'm waiting on a few things to wrap up but will updating my t999 ASAP.
Questions, which exact gapps did you use ? Does lineage have their own forums ?
Click to expand...
Click to collapse
For Gapps: http://opengapps.org/
Lineage OS community: http://lineageos.org/community/
So far I'm loving it! Tried to dirty flash from CM but got an error.
So clean install and so far so good, must play with it some more and feels familiar
Thanks!
Camera crashes when going to movie mode. Open camera works fine.
Today weekly it's not installed. It gives an error code 7...
This problem was on cm roms before i ran linageos on my t999, usb tethering this service doesnt work when i turn on the wifi but when i restart my device and active it emediatly it works ,is there any solution ???
hi guys, i install this rom in my t999, and now i have a very rare problem ... i can't call, and no show signal ... (look the image), the problem become rare because i can recieve calls (says call from emergency service) and SMS ... i'm looking for this problem in google .. and nothing...
https://drive.google.com/open?id=0BxMZVpOD7gCdeWVEbHJjRlZ4UW8
https://drive.google.com/open?id=0BxMZVpOD7gCdd3FINWdEUUNnSDQ
what modem and nightly?
No sound at all
I recently experienced a problem after using CM 13 for quite a while on my S3 T-999. The phone doesn`t make any sound at all. Neither the speaker nor the microphone. I flashed LineageOS a few days ago but the problem still persists. I also tried Mokee rom but it also couldn`t get rid of this issue. I finally flashed stock rom and the sound is back. I can make calls and use youtube, the audio is just fine on stock rom.
The only problem is jellybean is too slow and battery consuming for my aging S3. Guy do you have any idea how can I make the sound work on this rom ? Any help would be appreciated.
What are the best custom Kernels to go with this ROM ???
is there any news about supporting d2 verisons or say goodbye to this device
hasan.sy said:
is there any news about supporting d2 verisons or say goodbye to this device
Click to expand...
Click to collapse
Support is discontinued.
hudson: Pull d2
* I don't have time to maintain these anymore
Click to expand...
Click to collapse
This device is still Rock solid and it's a shame we don't have support on this device anymore. I understand the developer though and I thank him for all his effort up until now. I hope someone else could continue his work on this great phone
pcaseiro said:
I hope someone else could continue his work on this great phone
Click to expand...
Click to collapse
Mokee rom updated every day. Carbon rom supporting too.
Hey, guys. Autocorrect for me isn't working even though it's on. When I type text in the virtual keyboard, it doesn't correct misspelled words. Any way to fix this?
Hello everybody!
This thread will be dedicated to Android N developement. Since now the ROMs are not ported (we have a device tree to compile from source) we can get any Android N ROM working but with the same bugs.
From now on i will be working on fixing the bugs of the device tree/vendor tree and any help with it would be apreciated.
I will share my device tree so that people can help with it:
Device tree: https://github.com/end222/lineage_device_omega
Vendor tree:https://github.com/end222/lineage_vendor_omega
Want to help?
In the device tree in github I have opened some issues where I try to put as much relevant information as I can about the state of each bug and the errors I am getting. Please give it a look to see if someone can help
Bugs:
Working:
It boots up
Speaker sometimes
Network
Wifi
Bluetooth
FM Radio
Chargin while being off
Flashlight
Rear camera without focus
Mobile data
Sound
Not working:
Calls
Camera focus and front camera
Headphones
IR
Fingerprint sensor
It shows corrupted SD at boot but SD works good
Download links:
LineageOS: https://www.androidfilehost.com/?fid=817550096634793903
Old ones (To be updated):
AICP: https://www.androidfilehost.com/?fid=745425885120743786
Resurrection Remix: https://www.androidfilehost.com/?fid=817550096634781602
Dirty Unicorns: https://www.androidfilehost.com/?fid=817550096634782672
If you want to give a try to another AOSP like ROM just tell me and I can make a build
If you try the ROM and find any bug please tell me and I will add it to the bugs section in order to work on it and also to give other a clearer information about the ROM.
Do you like my work?
Offer me a beer here:
https://www.paypal.me/OrdunaLagarma
You forgot to add fingerprint sensor.
kristi6.9 said:
You forgot to add fingerprint sensor.
Click to expand...
Click to collapse
That's right
I recommend you to atach the sources below the rom and use devdb not just a regular thread
kristi6.9 said:
I recommend you to atach the sources below the rom and use devdb not just a regular thread
Click to expand...
Click to collapse
In the end I didn't use the device tree I had done. CM sources were giving me warnings about framework, something related to non-existent images for the resolution of the Redmi Pro (CM had already closed when I downloaded them).
Then I took the ROM compiled by andrianom for the RN4 and resized the system dat by hand. Then I modifyed the kernel to get it working on the RM Pro.
So in the end this is a port from the RN4, it is not compiled from source. However I will try to compile Lineage from source as it is almost the same and the device tree I had made should work with some modifications
OK
end222 said:
In the end I didn't use the device tree I had done. CM sources were giving me warnings about framework, something related to non-existent images for the resolution of the Redmi Pro (CM had already closed when I downloaded them).
Then I took the ROM compiled by andrianom for the RN4 and resized the system dat by hand. Then I modifyed the kernel to get it working on the RM Pro.
So in the end this is a port from the RN4, it is not compiled from source. However I will try to compile Lineage from source as it is almost the same and the device tree I had made should work with some modifications
Click to expand...
Click to collapse
If someone could fix fingerprint sensor and headphones, I'm sold
misterright1 said:
If someone could fix fingerprint sensor and headphones, I'm sold
Click to expand...
Click to collapse
I know there are many bugs but at least headphones are working
end222 said:
I know there are many bugs but at least headphones are working
Click to expand...
Click to collapse
HHahahah thats an advantage according to other roms.?????
when can you make this rom stable bro?not eta just asking
pou_gh2 said:
when can you make this rom stable bro?not eta just asking
Click to expand...
Click to collapse
I won't answer that question [emoji14]
I am still really new in the world of developing ROMs as Redmi Pro is the first device that I have used for developing. Then if I knew how to solve all the bugs maybe I could tell you more or less how long it could take.
However, the only thing I know is that I have to modify the vendor tree by mixing it with the vendor tree of other devices. So I cannot tell how long it can take and if I will be able to do it
pou_gh2 said:
when can you make this rom stable bro?not eta just asking
Click to expand...
Click to collapse
don't be a prick dude
Recommended resources
Hi end222 , I just got this phone. Love the specs / screen / performance. The only thing i hate is the OS. I had been using Nougat on a flashed Samsung S4. Just cant bear the older version of Android now, especially the notifications.
I am not new to the world of development but haven't developed ROMs before. Are there any recommended resources you have where I can learn the basics and add on to the work you have done so far. I would love to to be able to create version which can be used daily.
turbochild said:
Hi end222 , I just got this phone. Love the specs / screen / performance. The only thing i hate is the OS. I had been using Nougat on a flashed Samsung S4. Just cant bear the older version of Android now, especially the notifications.
I am not new to the world of development but haven't developed ROMs before. Are there any recommended resources you have where I can learn the basics and add on to the work you have done so far. I would love to to be able to create version which can be used daily.
Click to expand...
Click to collapse
I would really love to see more people working for this phone.
What I recommend you is to read some of the MTK porting guides that can be found on the internet, for example, on xda.
The most important thing you have to learn from those guides is how to port the boot.img.
Do not try to port the whooe ROM using those methods because I tried and they result in most of cases in bootloop. So to port to Redmi Pro you have to:
- From RN4 just by porting the boot.img (and resizing the system image in Nougat) is enough to get it booting.
- From Apollo Lite you will have to copy also hwcomposer from the stock ROM, located in lib/hw and lib64/hw. Also do not forget to port also the boot.img
If you find any problem or have any doubt do not hesitate to send me a message and I will do my best to help
Enviado desde mi Redmi Pro mediante Tapatalk
Thanks end222 for your work keep it up man
Sent from my Redmi Pro using Tapatalk
Lately, I have been always checking all the threads created expecting for any stable update to flash redmi pro but it seems everyone gave up from porting... Is there anyway to port an existing nougat ROM from other xiaomi model and getting stable ? At least the phone and the headset part... I am tired of MIUI ROM specially the weekly version...
Besides that I would to thank to all the people that had helped with this project without them I probably had sold my redmi pro already >.>
rijrg4 said:
Lately, I have been always checking all the threads created expecting for any stable update to flash redmi pro but it seems everyone gave up from porting... Is there anyway to port an existing nougat ROM from other xiaomi model and getting stable ? At least the phone and the headset part... I am tired of MIUI ROM specially the weekly version...
Besides that I would to thank to all the people that had helped with this project without them I probably had sold my redmi pro already >.>
Click to expand...
Click to collapse
The closest phone to the RM Pro is the Redmi Note 4 and this is the best I have been able to do by porting from that device. The main problem is that the phone isn't working in the RN4 either.
Whenever I have more free time I will keep trying things. It should be possible to get at least a good working non MIUI ROM based on Android 6. However it would be much harder to get Android 7 stable
I want to try this ROM, can i downgrade to 6.0 based miui rom safely after I try this ROM? ini
doripto. said:
I want to try this ROM, can i downgrade to 6.0 based miui rom safely after I try this ROM? ini
Click to expand...
Click to collapse
Yes, you should be able to flash MIUI with TWRP after using this ROM. I would also recommend you to do a backup of MIUI before flashing it and then you can come back to MIUI without losing any apps
I tried this rom last night and its great to experience CM again, btw when im insert my sd card it says that my sd card is corrupted but its not corrupted and working fine when I tried it with my sisters MiMax...