Original CM12S for Yureka" Thanks to CAESAR" - YU Yureka General

Hi Guys
Here's the official link of CM12S OTA package for Yu Yureka.
Guide:
Step 1: Download the official CM12s ROM for Yu Yureka "cm-12.0-YNG1TAS0W0-tomato-signed.zip" from one of the links above
Step 2: Copy the downloaded file onto the device memory – suggest you to copy it into the root folder
Step 3 : Flashing the OTA using Stock Cyanogen recovery
(To go into recovery: Press Volume up + Volume down + Power button, three buttons at the same time)
(To move up and down in recovery use volume buttons and power button to select)
1. Turn off your device
2. Reboot into stock recovery
3. Select Apply Update
4. Select Choose from internal storage
5. Select the file "cm-12.0-YNG1TAS0W0-tomato-signed.zip". The ROM will be flashed and you should be seeing the Android Bot
6. Once installation is over, go to main page and ‘wipe cache partition‘.
7. Then select Reboot system now
http://builds.cyngn.com/cyanogen-os/tomato/12.0-YNG1TAS0W0-tomato/56deeca328/cm-12.0-YNG1TAS0W0-tomato-signed.zip
I'm not the owner of the link..Original Credit goes to Caesar

thanks a lot.. I ll be making a video on this.. :good:
here it is ..

mythreya said:
Hi Guys
Here's the official link of CM12S OTA package for Yu Yureka.
http://builds.cyngn.com/cyanogen-os/tomato/12.0-YNG1TAS0W0-tomato/56deeca328/cm-12.0-YNG1TAS0W0-tomato-signed.zip
I'm not the owner of the link..Original Credit goes to Caesar
Click to expand...
Click to collapse
I know it's original, but last I heard CM12S was still in the soak test procedure. There may still be unresolved bugs.
Also, is this a 32-bit build or a 64-bit build?

id74em8 said:
I know it's original, but last I heard CM12S was still in the soak test procedure. There may still be unresolved bugs.
Also, is this a 32-bit build or a 64-bit build?
Click to expand...
Click to collapse
Its a 64bit build

mythreya said:
Its a 64bit build
Click to expand...
Click to collapse
Did you find any unresolved issues?
Like small WiFi/Bluetooth/RIL bugs of some sort?
Or is it perfectly safe to be flashed?
I can't take risks, since I won't be able to downgrade my device after flashing it.

id74em8 said:
Did you find any unresolved issues?
Like small WiFi/Bluetooth/RIL bugs of some sort?
Or is it perfectly safe to be flashed?
I can't take risks, since I won't be able to downgrade my device after flashing it.
Click to expand...
Click to collapse
it is perfectly safe to flash it... but after flashing, it lags a little.... and battery drains a lot.. and also heat issue... i would suggest u to wait for OTA update on your phone.

suhasrocz said:
it is perfectly safe to flash it... but after flashing, it lags a little.... and battery drains a lot.. and also heat issue... i would suggest u to wait for OTA update on your phone.
Click to expand...
Click to collapse
Will do so. Thanks

bro its doesn't matter's at all
suhasrocz said:
it is perfectly safe to flash it... but after flashing, it lags a little.... and battery drains a lot.. and also heat issue... i would suggest u to wait for OTA update on your phone.
Click to expand...
Click to collapse
You Can Flash This,because its same update that you will get on phone,
heating issue is normal,(thsi issue is also on kitkat because of proccessor).
And about battery once you fash the Rom ,
Calibrate your battery.:good:

id74em8 said:
Did you find any unresolved issues?
Like small WiFi/Bluetooth/RIL bugs of some sort?
Or is it perfectly safe to be flashed?
I can't take risks, since I won't be able to downgrade my device after flashing it.
Click to expand...
Click to collapse
It is same as OTA update..I installed the same in my mob & 2 of my friends mob..working superb with out any lags..Lags will be there for 15 to 20 min untill the ROM settle but once it is settled..It will be a delicious Lollipop :highfive:

mythreya said:
It is same as OTA update..I installed the same in my mob & 2 of my friends mob..working superb with out any lags..Lags will be there for 15 to 20 min untill the ROM settle but once it is settled..It will be a delicious Lollipop :highfive:
Click to expand...
Click to collapse
So I'm downloading the OTA zip.
Then I'll flash it through CWM. Right?

id74em8 said:
So I'm downloading the OTA zip.
Then I'll flash it through CWM. Right?
Click to expand...
Click to collapse
Nope U can't flash through CWM recovery...to install the CM12S u need to be on Stock Recovery

mythreya said:
Nope U can't flash through CWM recovery...to install the CM12S u need to be on Stock Recovery
Click to expand...
Click to collapse
Oh poop. I'm screwed. Now what do I do

Is stock recovery necessary?

sal_rc said:
Is stock recovery necessary?
Click to expand...
Click to collapse
Stock Recovery & Stock Rom is compulsory for CM12S

id74em8 said:
Oh poop. I'm screwed. Now what do I do
Click to expand...
Click to collapse
Just revert to Stock Recovery & Stock ROM..Download Stock Recovery & ROM from Below link & install it
Stock Reovery : http://d-h.st/FSH
Stock ROM : http://forums.yuplaygod.com/threads/official-factory-images-and-flashing-tools-kitkat-32-bit-only.2178/

Related

[Tool as a flashable zip] Get updates even after rooting in Redmi 1s MiUI

Get updates even after rooting on MiUI stock
Only works with stock Mi Recovery!
What does it do? :-
If you didn't understand this before, now you can get OTA updates even after rooting!
Click to expand...
Click to collapse
Why did I make this when new updates can be flashed just with ROM file? :-
Some people aren't that professional, in fact I made this for my friend for whom I rooted the phone and he had no idea how to flash it, recoveries scare him . Also the downloader app in MiUI sucks!
Click to expand...
Click to collapse
Installation instructions :-
Download the file in the attachments below and transfer it to the root of your phone's internal storage and rename it to update.zip
Go into the updater app, press the menu button and sleect "Reboot into recovery" and then press OK.
Use your phone's volume keys to navigate and then select English
Select flash update.zip to system and after it completes then reboot into system
Tada! You will now get OTA even when you're rooted!
Click to expand...
Click to collapse
Download it here or from the attachments :- ota get that.zip (rename this one to update.zip)
Thank me if this helped you!
I don't understand, what is the file doing
adipabeta said:
I don't understand, what is the file doing
Click to expand...
Click to collapse
it is a flashable zip which enables u to get updates even after rooting , it's like a manager :laugh:
royal_rocker said:
Get updates even after rooting on MiUI stock
Download it here or from the attachments :- ota get that.zip (rename tyhis one to update.zip)
Thank me if this helped you!
Click to expand...
Click to collapse
Signature verification failed :/
Good one. Thanks..
Tried it via twrp. Failed.
blazesachdeva said:
Signature verification failed :/
Click to expand...
Click to collapse
should work , try stock recovery or cwm
royal_rocker said:
should work , try stock recovery or cwm
Click to expand...
Click to collapse
Tried using mi stock recovery.. But no success..
blazesachdeva said:
Tried using mi stock recovery.. But no success..
Click to expand...
Click to collapse
It works for us on stock recovery... Try CWM. We are looking into this bro need ur co-operation! This is because one of our main devs is from Andhra Pradesh and if you watch the news then because of it we cant get the download link!
You want users to download a zip that contains an alternative build.prop, that is likely to cause the phone into a soft-brick, and which has 'only' an OTAUpdater.apk from an unknown origin; I'm afraid no. Noobs may fall for this. This (replacing with a custom build.prop) IS a potential risk and would NOT recommend users to do that (even if this zip was correctly packed/flashed). Reporting thread.
If you are the developer explain how your stuff work (the mechanism) and if you are not you have not right to put that in the developer section!!
thewisenerd said:
You want users to download a zip that contains an alternative build.prop, that is likely to cause the phone into a soft-brick, and which has 'only' an OTAUpdater.apk from an unknown origin; I'm afraid no. Noobs may fall for this. This (replacing with a custom build.prop) IS a potential risk and would NOT recommend users to do that (even if this zip was correctly packed/flashed). Reporting thread.
Click to expand...
Click to collapse
This actually aint my work, its of a friend of mine who has no time for xda and all, I was gonna remove it anyway cause I think he is stealing other ppls work without telling me, thanks for confirming my fear bro!
Thread closed per OP's request.

TWRP and New Oxygen OS update

i am assuming now that i have installed twrp, i cannot install the new Oxygen OS update, is that correct and i will have to wait for a twrpable update or stock recovery is available to flash? thank u
wondering the same
Bradl79 said:
i am assuming now that i have installed twrp, i cannot install the new Oxygen OS update, is that correct and i will have to wait for a twrpable update or stock recovery is available to flash? thank u
Click to expand...
Click to collapse
gkillerx said:
wondering the same
Click to expand...
Click to collapse
Flash the full zip 3.1.2 available here:
https://www.androidfilehost.com/?fid=24591020540821926
Flash SuperSu after this to maintain root
Funk Wizard said:
Flash the full zip 3.1.2 available here:
https://www.androidfilehost.com/?fid=24591020540821926
Flash SuperSu after this to maintain root
Click to expand...
Click to collapse
The question is, can we use ATO with TWRP installed?
Only custom roms have OTA available with TWRP installed.
gkillerx said:
The question is, can we use ATO with TWRP installed?
Click to expand...
Click to collapse
Oxygen Os fails to install the OTA when detected root ot any changes to system patrition, thus you have to wait for the full zip and dirty flash over the existing. Fairly simple.
I can still do a nandroid backup and restore stock OxygenOS, correct?
Funk Wizard said:
Flash the full zip 3.1.2 available here:
https://www.androidfilehost.com/?fid=24591020540821926
Flash SuperSu after this to maintain root
Click to expand...
Click to collapse
Thank u! Can I do a clean install with the zip or is it update only, also if I go to cm13 can I just clean flash that zip to go back to stock or do I have to get the firmware somewhere
Bradl79 said:
Thank u! Can I do a clean install with the zip or is it update only, also if I go to cm13 can I just clean flash that zip to go back to stock or do I have to get the firmware somewhere
Click to expand...
Click to collapse
You can clean flash. It is a full zip. I have restricted access to it now as I don't see anyone getting the OTA. So, it might be a mistake build. Lol.
Sent from my OnePlus2 using XDA Labs
yeah i can't get it now anymore either, is there anyway someone can post a mirror link
Bradl79 said:
yeah i can't get it now anymore either, is there anyway someone can post a mirror link
Click to expand...
Click to collapse
OxygenOS 3.1.2 http://downloadmirror.co/android/2zUL/OnePlus3Oxygen_16_OTA_008_all_1606122244_e0cfc5ffc8bf411a.zip.
gee2012 said:
OnePlus3Oxygen_16_OTA_008_all_1606122244_e0cfc5ffc8bf411a.zip https://drive.google.com/file/d/0B6Ufgy16r712WjNHUXBQdC1pNjA/view?usp=sharing or from here http://downloadmirror.co/android/2zUL/OnePlus3Oxygen_16_OTA_008_all_1606122244_e0cfc5ffc8bf411a.zip.
Click to expand...
Click to collapse
Hey @gee2012,
I'm on PA's 6.0.1 build right now, looking for a stock OOS ROM, newer the better. Can I flash this zip through TWRP? Just need to get back to stock somehow.
Thankyou.
chr0 said:
Hey @gee2012,
I'm on PA's 6.0.1 build right now, looking for a stock OOS ROM, newer the better. Can I flash this zip through TWRP? Just need to get back to stock somehow.
Thankyou.
Click to expand...
Click to collapse
No, you need to flash the stock recovery.img in fastboot first and then you can flash the zip in recovery/flash from local.
gee2012 said:
No, you need to flash the stock recovery.img in fastboot first and then you can flash the zip in recovery/flash from local.
Click to expand...
Click to collapse
Much appreciated. Could you also link me to the stock recovery?
chr0 said:
Much appreciated. Could you also link me to the stock recovery?
Click to expand...
Click to collapse
I`am looking for it myself atm, so i can`t help you with that i`am afraid
I (call me moron) am bricked (TWRP is installed) and looking for stock recovery also. Could someone post it, please? Otherwise I'm unable to flash a stock ROM. (TWRP does flash it, but after that it says "No OS installed".)
At least I have to wait for my new SIM cards for a few days anyway, so... never mind...
hasenbein1966 said:
I (call me moron) am bricked (TWRP is installed) and looking for stock recovery also. Could someone post it, please? Otherwise I'm unable to flash a stock ROM. (TWRP does flash it, but after that it says "No OS installed".)
At least I have to wait for my new SIM cards for a few days anyway, so... never mind...
Click to expand...
Click to collapse
Nandroid ?
Funk Wizard said:
Nandroid ?
Click to expand...
Click to collapse
Obviously that's why you can call me a moron - obviously I didn't do a Nandroid
hasenbein1966 said:
Obviously that's why you can call me a moron - obviously I didn't do a Nandroid
Click to expand...
Click to collapse
At least you have a problem that can be solved I posted a request for the stock recovery.img so maybe will upload it.
lol i guess everyone got excited and just installed TWRP off the bat, now that i have learned to pull .img files, its too late for me since i installed twrp instead of booting up, there has to be someone who had done it, i wonder why no is providing it, its a simple task.

Don't own this device so a few questions.

Okay, so, one of my friends has a OnePlus 3 and it disappointed in the battery life after the Nougat update, he wants to roll back to Marshmallow.
So,
1. Is rolling back to Marshmallow possible after a Nougat update? Are there any risks for flashing Marshmallow on Nougat's bootloader?
2. Can someone tell me what is the latest stable (don't want betas) Oxygen OS based off Marshmallow.
[email protected] said:
Okay, so, one of my friends has a OnePlus 3 and it disappointed in the battery life after the Nougat update, he wants to roll back to Marshmallow.
So,
1. Is rolling back to Marshmallow possible after a Nougat update? Are there any risks for flashing Marshmallow on Nougat's bootloader?
2. Can someone tell me what is the latest stable (don't want betas) Oxygen OS based off Marshmallow.
Click to expand...
Click to collapse
1. Yes, its fairly easy to roll back. Minimal risks If done corectly
2. I believe the latest mm build is 3.2.8 (not sure though)
XDRdaniel said:
1. Yes, its fairly easy to roll back. Minimal risks If done corectly
2. I believe the latest mm build is 3.2.8 (not sure though)
Click to expand...
Click to collapse
1. Any idea if there is any special procedure or just download and flash?
2. Thank you, I will check it out.
[email protected] said:
1. Any idea if there is any special procedure or just download and flash?
2. Thank you, I will check it out.
Click to expand...
Click to collapse
I'm not sure If we're allowed to post external links but, you can go to Google and search for "downgrade op3".
This is best marshmallow in my opinion of course
http://nevax.one/files/OnePlus3/FreedomOS/FreedomOS-op3-nevax-1.7-signed.zip
XDRdaniel said:
I'm not sure If we're allowed to post external links but, you can go to Google and search for "downgrade op3".
Click to expand...
Click to collapse
I did, but I wanted an opinion from XDA first. This website is a much more reliable source.
fanbogo said:
This is best marshmallow in my opinion of course
http://nevax.one/files/OnePlus3/FreedomOS/FreedomOS-op3-nevax-1.7-signed.zip
Click to expand...
Click to collapse
Sorry, I forgot to mention, I wanted stock ROM only.
Thanks though.
[email protected] said:
I did, but I wanted an opinion from XDA first. This website is a much more reliable source.
Sorry, I forgot to mention, I wanted stock ROM only.
Thanks though.
Click to expand...
Click to collapse
Remember that op3/3t N have f2fs file system which is unsupported on 3.2.8 (MM). You'll either have to use an old version of custom kernel (I think only bluspark supported f2fs at that time) or convert to ext4 in twrp. Other than that there should be no issue with flashing 3.2.8 over N
[email protected] said:
I did, but I wanted an opinion from XDA first. This website is a much more reliable source.
Sorry, I forgot to mention, I wanted stock ROM only.
Thanks though.
Click to expand...
Click to collapse
Stock? You will receive update to nogout on stock, are you going to cancel it? Where is point to do this everything
Flash freedom you are going to love it
ungeeked said:
Remember that op3/3t N have f2fs file system which is unsupported on 3.2.8 (MM). You'll either have to use an old version of custom kernel (I think only bluspark supported f2fs at that time) or convert to ext4 in twrp. Other than that there should be no issue with flashing 3.2.8 over N
Click to expand...
Click to collapse
This doesn't apply to stock ROM right?
fanbogo said:
Stock? You will receive update to nogout on stock, are you going to cancel it? Where is point to do this everything
Flash freedom you are going to love it
Click to expand...
Click to collapse
Yes.
My friend who's downgrading is completely unhappy with the Nougat battery life. Basically his screen on time got slashed down by one hour.
Yeah I know that's why I gave you link to marshmallow. I'm using it. Nogout need more time
[email protected] said:
Okay, so, one of my friends has a OnePlus 3 and it disappointed in the battery life after the Nougat update, he wants to roll back to Marshmallow.
So,
1. Is rolling back to Marshmallow possible after a Nougat update? Are there any risks for flashing Marshmallow on Nougat's bootloader?
2. Can someone tell me what is the latest stable (don't want betas) Oxygen OS based off Marshmallow.
Click to expand...
Click to collapse
Yes it's easy
Even I downgraded back to marshmallow
I can't find the video link
But I remember the steps so if u want to try tell me
Manav__25 said:
Yes it's easy
Even I downgraded back to marshmallow
I can't find the video link
But I remember the steps so if u want to try tell me
Click to expand...
Click to collapse
Just unlock boooader and flash it right?
[email protected] said:
Just unlock boooader and flash it right?
Click to expand...
Click to collapse
No
[email protected] said:
Just unlock boooader and flash it right?
Click to expand...
Click to collapse
First download the oxygen os 3.2.8 from oneplus downloads ( download on a laptop or pc)
Then completely factory reset Ur phone
Then transfer the downloaded file to the root of internal storage
Then go to settings< system update and click the settings logo on the top right corner(see the below pic) and select local and select the file
IT WORKED FOR ME
Manav__25 said:
First download the oxygen os 3.2.8 from oneplus downloads ( download on a laptop or pc)
Then completely factory reset Ur phone
Then transfer the downloaded file to the root of internal storage
Then go to settings< system update and click the settings logo on the top right corner(see the below pic) and select local and select the file
Click to expand...
Click to collapse
Really? Is it that simple? i followed a tut that had about 10-15 steps in order to make it work. You rock mate
XDRdaniel said:
Really? Is it that simple? i followed a tut that had about 10-15 steps in order to make it work. You rock mate
Click to expand...
Click to collapse
Thanks man!
If u have any problem or doubt PM me
And remember first boot after downgrade will take time
Manav__25 said:
First download the oxygen os 3.2.8 from oneplus downloads ( download on a laptop or pc)
Then completely factory reset Ur phone
Then transfer the downloaded file to the root of internal storage
Then go to settings< system update and click the settings logo on the top right corner(see the below pic) and select local and select the file
IT WORKED FOR ME
Click to expand...
Click to collapse
Well, I was planning on doing it via fastboot.
[email protected] said:
Well, I was planning on doing it via fastboot.
Click to expand...
Click to collapse
Oh okay
I don't know the fast boot method =)
[email protected] said:
This doesn't apply to stock ROM right?
Click to expand...
Click to collapse
Wrong. This applies to stock and so the change of file system is necessary.
tnsmani said:
Wrong. This applies to stock and so the change of file system is necessary.
Click to expand...
Click to collapse
Oh, I see.
Thank you for that. You probably saved me from a brick.

Can anyone prove me marshmallow latest update stock firmware ? MOB31E ?

Can anyone provide me stock firmware. my mobile got stuck on boot animation please help me ?
vivek1310yadav said:
Can anyone provide me stock firmware. my mobile got stuck on boot animation please help me ?
Click to expand...
Click to collapse
Well there's no MM based SPFT file, so all you have to do is either flash stock kk/LP using SPFT or if you've twrp installed, boot into TWRP again and wipe everything except SD, flash the MOB31E full stock Rom zip. Link : MOB31E OTA's and flashable zips thread
sachin n said:
Well there's no MM based SPFT file, so all you have to do is either flash stock kk/LP using SPFT or if you've twrp installed, boot into TWRP again and wipe everything except SD, flash the MOB31E full stock Rom zip. Link : MOB31E OTA's and flashable zips thread
Click to expand...
Click to collapse
Hello, please help
The device is canvas a1 and it is fully updated till the last update via OTAs only. I performed factory reset on it. It is now stuck on setup wizard. Not able to skip from there.
I wanted to flash it again.
So, can you please tell if it is OK to flash KK or LP flash files?
(I am asking this because, its BL might have got upgraded in OTA updates and it could be dangerous to downgrade to lower versions by flashing.)
pra27 said:
Hello, please help
The device is canvas a1 and it is fully updated till the last update via OTAs only. I performed factory reset on it. It is now stuck on setup wizard. Not able to skip from there.
I wanted to flash it again.
So, can you please tell if it is OK to flash KK or LP flash files?
(I am asking this because, its BL might have got upgraded in OTA updates and it could be dangerous to downgrade to lower versions by flashing.)
Click to expand...
Click to collapse
Do you've twrp recovery installed at the moment?
sachin n said:
Do you've twrp recovery installed at the moment?
Click to expand...
Click to collapse
No it is not even unlocked yet.
pra27 said:
No it is not even unlocked yet.
Click to expand...
Click to collapse
Remove your battery and insert it again, put the device into bootloader mode and unlock it, then you can fastboot the twrp and good to go.
Sent from my Redmi Note 4 using Tapatalk
sachin n said:
Remove your battery and insert it again, put the device into bootloader mode and unlock it, then you can fastboot the twrp and good to go.
Sent from my Redmi Note 4 using Tapatalk
Click to expand...
Click to collapse
You mean after this I can file LP flash files?
No downgrading bootloader issues right?
pra27 said:
You mean after this I can file LP flash files?
No downgrading bootloader issues right?
Click to expand...
Click to collapse
Nothing to worry. Once you get twrp, just clean flash stock lollipop Rom. Don't use SPFT, you gonna brick your phone if something goes wrong wrong. I'll link you LP (flashable via twrp) Rom, tell me when you done.
sachin n said:
Nothing to worry. Once you get twrp, just clean flash stock lollipop Rom. Don't use SPFT, you gonna brick your phone if something goes wrong wrong. I'll link you LP (flashable via twrp) Rom, tell me when you done.
Click to expand...
Click to collapse
Thanks a lot for your help.
Should i flash this twrp ? (from official site)
https://dl.twrp.me/sprout/
pra27 said:
Thanks a lot for your help.
Should i flash this twrp ? (from official site)
https://dl.twrp.me/sprout/
Click to expand...
Click to collapse
Nah, use this : https://www.androidfilehost.com/?fid=24562946973632081
Stable enough!!!!
sachin n said:
Nah, use this : https://www.androidfilehost.com/?fid=24562946973632081
Stable enough!!!!
Click to expand...
Click to collapse
thanks.. bdw that official twrp whose link i gave is also for sprout4 right?
Please give the stock rom link you were talking about earlier.
pra27 said:
thanks.. bdw that official twrp whose link i gave is also for sprout4 right?
Please give the stock rom link you were talking about earlier.
Click to expand...
Click to collapse
Yes it was also sprout4, in fact for both sprout 4 and sprout 8.
This : https://drive.google.com/uc?id=0B9_eDTtTcnv1LTF2UFhaSjhhZWM&export=download
Boot to TWRP
Wipe everything except SD card
Flash this rom
Reboot
sachin n said:
Yes it was also sprout4, in fact for both sprout 4 and sprout 8.
This : https://drive.google.com/uc?id=0B9_eDTtTcnv1LTF2UFhaSjhhZWM&export=download
Boot to TWRP
Wipe everything except SD card
Flash this rom
Reboot
Click to expand...
Click to collapse
i found this and right now flashing marshmallow from this thread. https://forum.xda-developers.com/ca...-stock-debloated-prerooted-untouched-t3403499
can you please share the thread from which you shared the file? also if there any marshmallow zip available, please give its link.
pra27 said:
i found this and right now flashing marshmallow from this thread. https://forum.xda-developers.com/ca...-stock-debloated-prerooted-untouched-t3403499
can you please share the thread from which you shared the file? also if there any marshmallow zip available, please give its link.
Click to expand...
Click to collapse
Wait..
Edit : https://forum.xda-developers.com/crossdevice-dev/android-one-general/rom-t3120737
Sent from my mido using XDA Labs
sachin n said:
Wait..
Edit : https://forum.xda-developers.com/crossdevice-dev/android-one-general/rom-t3120737
Sent from my mido using XDA Labs
Click to expand...
Click to collapse
Thanks bro, you have been helpful in bringing my phone back to life.
One last thing though, what should i do incase some OTA arrives.. is there any way to block it?
pra27 said:
Thanks bro, you have been helpful in bringing my phone back to life.
One last thing though, what should i do incase some OTA arrives.. is there any way to block it?
Click to expand...
Click to collapse
Disable Gplay services notifications. Or Just download and flash MOB31E stock Rom. Zip
Sent from my mido using XDA Labs
Hi there
I have the same problem and my phone is stuck at the boot screen.
My phone does not allow me to enable USB debugging and I am really stuck with being able to install TWRP and flash the stock ROM.
I'm incredibly confused and am unsure what I am doing. Attached is a screenshot of the CMD box.
Help and simple instructions would be appreciated.
Thanks in advance.

RAW WW 1910.44 download

RAW WW 1910.44 download
Link download: https://mega.nz/#!EwoXiSyK!KNprkA40oUHce-jl7WeHp9g-BohEVL--99_0klhm1go
Thanks to Vietnam ROG II telegram!
Root & boot stock WW19010.44
Link download: https://mega.nz/#!owR2BQJD!2ALZBYAYoSubuqUOZOQyg6R6YzFOub8Eus9bib9g00s
anyone got the CN version ? ty
How to update from 10.35 and stay rooted without losing data ?
If I use cmd "flashall-AFT" will it update my rom or i will b wiping my data too ?
Kindly point me in the ri8 direction.
zohaibshafijutt said:
How to update from 10.35 and stay rooted without losing data ?
If I use cmd "flashall-AFT" will it update my rom or i will b wiping my data too ?
Kindly point me in the ri8 direction.
Click to expand...
Click to collapse
Download the RAW, running flashall_AFT.cmd won't delete your data, phone will restart once done. takes about 5 mins. let phone reboot and finish updating in os then turn device off, boot back to fastboot and flash rootWW191044.img from post 2. Done, all up to date with latest rom, data intact and root back
(i did it myslef just moments ago, so it definitely works fine
reg66 said:
Download the RAW, running flashall_AFT.cmd won't delete your data, phone will restart once done. takes about 5 mins. let phone reboot and finish updating in os then turn device off, boot back to fastboot and flash rootWW191044.img from post 2. Done, all up to date with latest rom, data intact and root back
(i did it myslef just moments ago, so it definitely works fine
Click to expand...
Click to collapse
Thank you
reg66 said:
Download the RAW, running flashall_AFT.cmd won't delete your data, phone will restart once done. takes about 5 mins. let phone reboot and finish updating in os then turn device off, boot back to fastboot and flash rootWW191044.img from post 2. Done, all up to date with latest rom, data intact and root back
(i did it myslef just moments ago, so it definitely works fine
Click to expand...
Click to collapse
ota update works after flashing this?
arxxx said:
ota update works after flashing this?
Click to expand...
Click to collapse
Same as before, manual updates either ota or raw, i'm guessing...
reg66 said:
Same as before, manual updates either ota or raw, i'm guessing...
Click to expand...
Click to collapse
do you try manual update? with adb sideload or....?
con_sau_may_tinh said:
do you try manual update? with adb sideload or....?
Click to expand...
Click to collapse
the other guy was asking if i/we can get ota's after this update, but i don't know, this is the current latest... i used fastboot/adb to flash raw...
reg66 said:
the other guy was asking if i/we can get ota's after this update, but i don't know, this is the current latest... i used fastboot/adb to flash raw...
Click to expand...
Click to collapse
hi reg
if i want flash raw rom in page one n root..can i use this same method with this link?
i flash from ww1908.12 to ww1910.35 with this method.
my devices now in ww1910.35 witch lock bootloader n unroot.
https://forum.xda-developers.com/ro...check-change-fingerprint-cn-to-t4002279/page2
wilsen1985 said:
hi reg
if i want flash raw rom in page one n root..can i use this same method with this link?
i flash from ww1908.12 to ww1910.35 with this method.
my devices now in ww1910.35 witch lock bootloader n unroot.
https://forum.xda-developers.com/ro...check-change-fingerprint-cn-to-t4002279/page2
Click to expand...
Click to collapse
yes you can just straight away download the ww1910.44 raw, extract it, run flashall_AFT.cmd then wait (around 5-10 minutes) with cmd window open and later your phone will restart by itself and upgraded to ww1910.44 version
v3ll said:
yes you can just straight away download the ww1910.44 raw, extract it, run flashall_AFT.cmd then wait (around 5-10 minutes) with cmd window open and later your phone will restart by itself and upgraded to ww1910.44 version
Click to expand...
Click to collapse
my all data is lose?i dont want my all data lose.
this method no need unlock bootloder?
wilsen1985 said:
my all data is lose?i dont want my all data lose.
this method no need unlock bootloder?
Click to expand...
Click to collapse
no the data is not lose, just like OTA update. no need to unlock bootloader.
v3ll said:
no the data is not lose, just like OTA update. no need to unlock bootloader.
Click to expand...
Click to collapse
oh nice info bro thx
Thank you so much
Not sure what happened. Updated this via flash but this rom seems to freeze my phone every now and then.
lavenderyew said:
Not sure what happened. Updated this via flash but this rom seems to freeze my phone every now and then.
Click to expand...
Click to collapse
A few others have reported this on telegram, not sure how to fix it, seems to only affect a few... Perhaps try flashing again?
lavenderyew said:
Not sure what happened. Updated this via flash but this rom seems to freeze my phone every now and then.
Click to expand...
Click to collapse
Someone on telegram group reported that disabling 'Always-on panel' and 'Lift to check phone' under display settings seems to have fixed it for them... might wanna try that
Edit : no it wasn't, it was disabling pocket mode in Settings
Thanks for all the sharing.
But looking at the problems of .44 , is it advisable to perform the update?

Categories

Resources