windowns 7 not detecting my devices in flash mode but detecting in uknows devices, the LED change to green on my phone but not thing happen i don't know what happen cuz i never see face with this before any one can help me pls :crying:
P/s: flashboot mode detected, pc can conecting my XMS, PCC detected but don't know what my devices name, its just show that Xperia :crying::crying:
apacher said:
windowns 7 not detecting my devices in flash mode but detecting in uknows devices, the LED change to green on my phone but not thing happen i don't know what happen cuz i never see face with this before any one can help me pls :crying:
P/s: flashboot mode detected, pc can conecting my XMS, PCC detected but don't know what my devices name, its just show that Xperia :crying::crying:
Click to expand...
Click to collapse
Installed drivers from C:/flashtool/drivers ?
If not, install them, restart.
Related
I was using XZXperience 2 on my Sony Xperia S, and then sony companion detected that i had firmware 6.1.A.1.45 and 6.1.A.55 was available, so just to give it a try, I installed that update, but that is a failed update, it says unfortunately music player stopped working, or unfortunately xperia keyboard stopped working etc. The main problem is that my system does not recognize my XS anymore, it says USB Device Not Recognized, so I cant connect it to Flashtool or PC Companion for repair. The Sad part is that I cant even connect it in Flash Mode, I tried a hard reset by using power button and volume up buttons, but no use. I should mention that once it recognized my phone when i turned off my laptop and removed its battery too, after restarting both phone and laptop, flashtool detected that phone was connected with USB Debugging OFF, though it was on, but as a try, I unchecked USB Debugging and then checked it again, and it worked. Now my Xperia S was connected in USB debugging mode, I tried to install busybox, rooted it, and tried to install CWM recovery,flashtool said that busy box was installed and phone was rooted, but it could not install recovery and I used another tool to install recovery,which had a bat file and it installs recovery automatically. But it didnt. After restarting my phone, the same issue appeared again, My PC does not recognize my Xperia S, tried previous procedure several times, but no use. Cant even repair it as my set cant go in flash mode. What can I do? have I bricked my Xperia S? I`m in Pakistan and there is no official Sony Mobile franchise as they dont launch their flagships in Pakistan. Please help me, considering I`m used to with rooting,flashing etc. How can I connect my phone in flash mode? Thank you.
C:/flashtool/driver
Open usb_driver.exe
Choose all the drivers you need (Xperia S drivers, flashmode driver & fastboot mode driver)
Your laptop should be able to detect your phone now.
I think i'm not the only one who wants to root the T3. There are many guides which are very complicated for people who are no software developers...
http://forum.xda-developers.com/xperia-t3/general/root-firmware-18-1-1-21-t2889847
If this is too complicated then probably you shouldnt even consider rooting - procedure cant be any easier. There isnt also any other way to root T3 ATM.
And yes, this works also with .25 (4.4.4 KK). And for different ver. of T3 (5102 for example) use software for your model as base.
Ditarius said:
http://forum.xda-developers.com/xperia-t3/general/root-firmware-18-1-1-21-t2889847
If this is too complicated then probably you shouldnt even consider rooting - procedure cant be any easier. There isnt also any other way to root T3 ATM.
And yes, this works also with .25 (4.4.4 KK). And for different ver. of T3 (5102 for example) use software for your model as base.
Click to expand...
Click to collapse
I think I know what to do. Can i use the sony Emma thing as the flash tool?
what to do now
I've installed adb drivers fastboot drivers and successfully flashed the .14 kernel then switched on the phone and trying to root using Xperia rootkit is not detecting my device and stuck like this(as shown in the screen shot) what to so and PC companion is also not detecting my t3 (but while am on .32kernel it works fine)
I've flashed the .32kernel (cause am on 4.4.4) again and repeated everything but same problem,, redownloaded the kernels but same problem,,
Why rootkit is not detecting my phone ??? Plz help
need help
While m on .14 kernel rootkit or PC companion were not able to detecting my phone. On switched off state(.14kernel) flash tool displayes that the USB debugging is off and the phone is connected in mtp mode..
But before flashing .14 kernel(while am on .32kernel) I turned on USB debugging and set the USB connection mode to MSC mode (otherwise flashtool wouldn't flash kernel)... So why am facing this problem???...
After flashing .14 kernel I switched on the phone and wait at least 10 minutes then (the screen shots only Sony logo and goes black) after ten minutes when I connect the phone to the PC and lunch rootkit its not detecting showing waiting for device PC companion is also not detecting:crying:...... What to do now
avayrocks said:
While m on .14 kernel rootkit or PC companion were not able to detecting my phone. On switched off state(.14kernel) flash tool displayes that the USB debugging is off and the phone is connected in mtp mode..
But before flashing .14 kernel(while am on .32kernel) I turned on USB debugging and set the USB connection mode to MSC mode (otherwise flashtool wouldn't flash kernel)... So why am facing this problem...
After flashing .14 kernel I switched on the phone and wait at least 10 minutes then (the screen shots only Sony logo and goes black) after ten minutes when I connect the phone to the PC and lunch rootkit its not detecting showing waiting for device PC companion is also not detecting:crying:...... What to do now
Click to expand...
Click to collapse
Hi. Before you flash .14 you need to enable usb debugging in your phone, connect it to your pc via usb cable and check the "allow always..." checkbox in your phone:
P.D. If the popup is not showing when you plug your phone, then open a terminal (cmd in windows), launch adb devices command and you should see the popup in your device. If does not, unplug the phone, stop adb, plug the phone again and try launching adb command.
did it
pepinliria said:
Hi. Before you flash .14 you need to enable usb debugging in your phone, connect it to your pc via usb cable and check the "allow always..." checkbox in your phone:
P.D. If the popup is not showing when you plug your phone, then open a terminal (cmd in windows), launch adb devices command and you should see the popup in your device. If does not, unplug the phone, stop adb, plug the phone again and try launching adb command.
Click to expand...
Click to collapse
Rooted bro thnkx for help
Hi guys, I bricked my xperia s by flashing wrong kernel few months ago. I tried to follow this guide http://forum.xda-developers.com/showthread.php?t=1849170
But my phone is not getting detected by PC. I am using Windows 7. I had install fasboot, flashmode and xperia s drivers from flashtool folder but no luck connecting the phone to pc.
The red LED appears while charging. after somtime it goes off and sony logo appears. but still pc doesnt recognise my phone.
do i need to install adb drivers as well??
and if anyone can send a link to right drivers for xperia s, it will be helpfull. thanks
Hello...
i've got a bricked phone from a friend of mine because he's out of options to put it back to fully function.
he told me that he had flashed the phone while it was in 9008 usbbulk whith a recovery thats not suitable for this
phone. now the only thing the phone is doing is turn backlight on when connect to pc ... it will not be recognized. all drivers are installed .... windows runs on test mode with no verfication for drivers or else ... is it possible to rescue the phone or is it good white brick ?
Phone Data:
LG K10 (420N)
16 GB
TheRazcall said:
Hello...
i've got a bricked phone from a friend of mine because he's out of options to put it back to fully function.
he told me that he had flashed the phone while it was in 9008 usbbulk whith a recovery thats not suitable for this
phone. now the only thing the phone is doing is turn backlight on when connect to pc ... it will not be recognized. all drivers are installed .... windows runs on test mode with no verfication for drivers or else ... is it possible to rescue the phone or is it good white brick ?
Phone Data:
LG K10 (420N)
16 GB
Click to expand...
Click to collapse
Do you see anything in device manager?
No... device manager shows nothing and there is no satisfaing "da ding" noise after plug in the USB to my PC...
Hello guys!
Today i make a big mistake. I want to install CM 14 to my LG g3 . At first i can't go into TWRP . After 1 hour a somehow managed to boot in twrp but after formating the old os the phone is not responsing at all.
Things that i try:
I try to install a bootloader with ADB but the my pc cant recognise the device.
Things that the phone does:
There is no boot screen all it does is led and blue LED is blinking.
If i connect to the pc it recognise it as "Android " but i cant do nothing with it.
Please help me. Thank you
Did you try to connect in download mode and flash stock firmware with the official toolkit? I don't remember it's name though
Balino said:
Did you try to connect in download mode and flash stock firmware with the official toolkit? I don't remember it's name though
Click to expand...
Click to collapse
Yes of course but the pc diden't recognise the phone and it say its " not cot connected"
You need to install device drivers and ADB drivers before trying. Use USB 2.0 ports too, it's acting wired with 3.0 ones