What is this:
This is Stuxnet a custom kernel for Android, this kernel focuses on simplicity and stabiilty. All features on this kernel are based on long hours of testing and all are thoroughly tested to give end users the best experience for their device.
Stuxnet is mostly stock with optimizations and features that are often used by users that are not affecting performance on their device. Future development of this kernel will focus on Performance and Stability.
So enough with the intro and start testing this on your device.
Features:
Based on Xiaomi kernel source
Fully Optimized Kernel
Sound Control
FSYNC Control
Voltage Control
MSM Hotplug
Thermal Enhancements
USB Fast Charge
Check Github and/or Gitlab for full changelog
How To's:
Install in recovery
No need to wipe (unless you want to wipe your a$$)
Reboot
Kiss yo' mama
***** Slap an iPhone user.. Smile!
Enjoy
Credits:
Google
CyanogenMod
Linux
SimpleAOSP
and all custom kernel devs
Download:
CM
MIUI
Kernel has two builds Stable and Nightlies
WARNING!
This kernel is only compatible on CM based ROMs.
~End
Donations:
@morpheus620 - $15
@gary138.138 - $15
@Riichard63 - $20
Thanks man!
Will test it soon! Sorry for the Noob question but can you tell me if it can be used for building cm11. I am a noob in android development.
I'm using this at the moment on XenonHD. So far everything is working. And that smoothness....its off the charts! xD Btw Dev @Gnome, can you add Lionheart and Sio on the next release?
And LCD KCAL please.
Gnome said:
One More!
Click to expand...
Click to collapse
Thanks
Sent from my MI 3W using XDA Free mobile app
I just flashed this kernel on the XeonHD 4.25 build.
Hoping that they are good partners.
This is just a preview, I'll be adding some stuff from my previous kernels soon... just checkout my git for changelogs and also check the download page for new releases.
Gnome said:
This is just a preview, I'll be adding some stuff from my previous kernels soon... just checkout my git for changelogs and also check the download page for new releases.
Click to expand...
Click to collapse
Ooohh yeaahh! E. A. G. E. R. L. Y waiting. XD
Working on Bitti09's CM12.1 confirmed
No new governors yet! Waiting!
On Revolution Remix rom, i got camera fixed, and after using the GPS fix app, it fix the gps fery fast.. so, so far everything working!
Thanks a lot, @Gnome!
Jhayzt said:
And LCD KCAL please.
Click to expand...
Click to collapse
+1
I used KCAL controls on StellAR and the difference was AMAZING! (alas StellAR doesn't gel with XenonHD for me)
SharksT said:
On Revolution Remix rom, i got camera fixed, and after using the GPS fix app, it fix the gps fery fast.. so, so far everything working!
Click to expand...
Click to collapse
*Resurrection
UPDATE: @Gnome I flashed the kernel, everything seems to be working fine (WiFi, Sound mods etc).
But call bug v1 seems to be present (touchscreen active during call)...can't comment about call bug v2 (screen-off death) yet, but I hope it's not here, cuz I plan to use this kernel as my driver...
The Dork Knight Rises said:
UPDATE: @Gnome I flashed the kernel, everything seems to be working fine (WiFi, Sound mods etc).
But call bug v1 seems to be present (touchscreen active during call)...can't comment about call bug v2 (screen-off death) yet, but I hope it's not here, cuz I plan to use this kernel as my driver...
Click to expand...
Click to collapse
Sorry, can you make difference in V1 call bug and V2.
I missed something obviously
P.s. OP thanks for 1st OPEN ANDROID development thread wort mention
Gonna try after Worker's day
sudy_freak said:
Sorry, can you make difference in V1 call bug and V2.
I missed something obviously
P.s. OP thanks for 1st OPEN ANDROID development thread wort mention
Gonna try after Worker's day
Click to expand...
Click to collapse
Yeah, call bug v1 is something most ppl who recently joined the Mi3 forums won't have faced.
It is one of the major bugs (aside from deep sleep reboot) that was there in the original Lollipop ROMs for cancro. It was fixed a long time ago (by audahadi and Bitti I believe, as Ivan's ROMs had the bug for a long time afterwards too).
The bug was that the touchscreen would remain active when you're in a call and the proximity sensor turns the screen off. It would cause the notification/quicksettings panel to be pulled down or brightness to be changed due to contact with ear or cheeks. Other more complex things could also happen like when I once turned on Airplane mode while talking and got disconnected :laugh:
And call bug v2 is a new bug that seems to affect ROMs (except I believe Ivan's AOSP and SOKP which switched to Ivans kernel I think) since 5.1...
While calling (or sometimes VERY RARELY while doing something else) the phone kind of hangs, the screen goes dark and it goes into a screen of death mode. Nothing can be done, your only option is to press and hold Power button for a very long time (approx 12-15 secs; much longer than a normal hard reset ~8secs) to hard reboot your phone.
Hope you got it. :good:
PS. Yes, try this kernel. You won't be disappointed.
Added some under the hood stuff on 3rd build, also check if fast charge works, since it works fine on my end.
Gnome said:
Added some under the hood stuff on 3rd build, also check if fast charge works, since it works fine on my end.
Click to expand...
Click to collapse
Thanks Dev @Gnome! I'm trying it at the moment.
Wow, using alpha 3 working great even on temasek 10.6 by moonlight, just waiting another hotplug, IO Scheduler, CPU & GPU Governors, btw can you make a little downclock and overclock cpu freq tables? Thx for great kernel....
Gnome said:
Added some under the hood stuff on 3rd build, also check if fast charge works, since it works fine on my end.
Click to expand...
Click to collapse
Fast charge!
Very useful!
I'll try this asap.:laugh:
@Gnome , Buddy thanks for your work gonna try it soon
just a query
there are two build dated 30-4-15
Alpha 3 and Alpha Z
whats the difference which one to flash
ZenR2 said:
@Gnome , Buddy thanks for your work gonna try it soon
just a query
there are two build dated 30-4-15
Alpha 3 and Alpha Z
whats the difference which one to flash
Click to expand...
Click to collapse
dont mind the Lettered version, just flash the numbers.
Gnome said:
dont mind the Lettered version, just flash the numbers.
Click to expand...
Click to collapse
buddy flashed the alpha 3 build , but now wifi is not working on latest Xenon Hd rom
Related
I'm back again.
It's the Andromadus htc7x30-3.0 (andromadus_4.4 branch) source compiled by me with tweaks. At the moment I'll consider it alpha, updates will be sporadic and not necessarily better than whatever came before it.
GPL Stuff
Source
Toolchain: @Christopher83 's Cortex A8 Optimized Cross Compiler Toolchain
Branch: andromadus_4.4
Kernel Version: 3.0.x
defconfig: vision_andromadus_defconfig
And the Rest...
Instructions: Click the link below, flash in recovery (no need to wipe anything), reboot
UPDATE 22/03/14: Click "Downloads" above for latest download
Changelog
Credits: Andromadus team, and a ****ton of people who have supported open source allowing me to take stuff for this kernel, and testers (you know who you are)
XDA:DevDB Information
AlterNdromadus 3.0.x, Kernel for the HTC Desire Z
Contributors
HTCDreamOn
Kernel Special Features:
Version Information
Status: No Longer Updated
Created 2014-11-29
Last Updated 2014-11-29
RESERVED
RESERVED
Justin case
Justin case
Told ya I'd wait for it. Downloaded and about to install. Thanx
Hi, just a quick report from V17 I had yesterday :
Not good at all for me :
- always a little latency before acting. Really noticealble on wake up.
- Same wifi bug as in stock one (scratch after airplane mode)
- long black screen during synchros this morning
- multiple android.process.media alerts. I had to reboot twice.
- with all that I can't say if it save battery as all the reboot consumes a lot...
I went back on stock ROM which is really more responsive for me.
Will try V18 but tonight. I need my phone at work today!
Are logcats required or unusefull for you?
RE: [KERNEL][DEV][ALPHA] AlterNdromadus 3.0.x KitKat CM11 | AOSB [24/02/14]
Kéno40 said:
Hi, just a quick report from V17 I had yesterday :
Not good at all for me :
- always a little latency before acting. Really noticealble on wake up.
- Same wifi bug as in stock one (scratch after airplane mode)
- long black screen during synchros this morning
- multiple android.process.media alerts. I had to reboot twice.
- with all that I can't say if it save battery as all the reboot consumes a lot...
I went back on stock ROM which is really more responsive for me.
Will try V18 but tonight. I need my phone at work today!
Are logcats required or unusefull for you?
Click to expand...
Click to collapse
A lot of those problems will be because I mucked about with memory allocation, but that should be fixed on Alpha 18. Logcats are more useful than nothing, last kmsg is good too, both is perfect. I expect the WiFi thing will be a ROM problem, and as to the latency I'm not sure. I tried to implement a GPU on input thing, maybe it doesn't work too well. You don't have ART enabled do you? Regarding the media crashes, are these random or happen at a particular moment, e.g. playing music, games, videos?
Thanks alot
PS as these are alpha I wouldn't suggest anyone else using these during work
evrything seems to be a okay this way. the wifi from airplane mode is from the rom, noticed it before installing ur kernal. no lag here. battery seems to be holding up well. idk if its the kernal or because i have radio turned off but together they seem to be doing great. THANK YOU. only time i got lag was when i went from dyninteractive to powersave, but since evrything is going well just went back to dyn
Awww great to see you again my friend
Will test it tonight. Only for flinny's alpha3 or also AOSB 1.2.9 / 1.3.0?
Cheers
Blade
RE: [KERNEL][DEV][ALPHA] AlterNdromadus 3.0.x KitKat CM11 | AOSB [24/02/14]
BIade said:
Awww great to see you again my friend
Will test it tonight. Only for flinny's alpha3 or also AOSB 1.2.9 / 1.3.0?
Cheers
Blade
Click to expand...
Click to collapse
Yeah this is only for KitKat ROMs, so the ones you mentioned; it won't boot on Jelly Bean.
To everyone: if I were to compile a ROM, what would you think of a revival of cn.fyodor's AOSP 4.2.2 with added features? Or any other suggestions?
HTCDreamOn said:
You don't have ART enabled do you? Regarding the media crashes, are these random or happen at a particular moment, e.g. playing music, games, videos?
Click to expand...
Click to collapse
NO ART for me
Just Seeder
media crashs are random. Sometime related to nothing but it seems to happen when working and screen goes off
I had to wipe things and reboot twice to fix it
Will report if it comes back
V18 far betteer. But I still notice this latency with black screen which is longer during synchro
HTCDreamOn said:
Yeah this is only for KitKat ROMs, so the ones you mentioned; it won't boot on Jelly Bean.
To everyone: if I were to compile a ROM, what would you think of a revival of cn.fyodor's AOSP 4.2.2 with added features? Or any other suggestions?
Click to expand...
Click to collapse
personally I would like to see if we can get a newer kernel working, like a 3.4 release.
RE: [KERNEL][DEV][ALPHA] AlterNdromadus 3.0.x KitKat CM11 | AOSB [24/02/14]
bradley_e_smith said:
personally I would like to see if we can get a newer kernel working, like a 3.4 release.
Click to expand...
Click to collapse
Are you reading my mind ? I've already been thinking about porting 3.4 (with help) for a while. It would be hard though, so in the meantime any ROM suggestions?
@Kéno40 I'm not sure what this latency problem is, I'll compile a version without the GPU input handler implemented when I have time and see if that makes a difference. Other than that I really can't figure out why you're having a problem, it's fine for me at least. What do you mean by synchro?
HTCDreamOn said:
Are you reading my mind ? I've already been thinking about porting 3.4 (with help) for a while. It would be hard though, so in the meantime any ROM suggestions?
@Kéno40 I'm not sure what this latency problem is, I'll compile a version without the GPU input handler implemented when I have time and see if that makes a difference. Other than that I really can't figure out why you're having a problem, it's fine for me at least. What do you mean by synchro?
Click to expand...
Click to collapse
I would be interested. I have compiled the lastest flinny merged with the lastest cyanogen frameworks. It boots but the camera doesn't work. So I have been looking further, but still playing around. I need to increase my virtual linux box diskspace, so I am working on reconfiguring it b/c of lack of diskspace.
I would love to see AOSP KK rom for our device. Just plain and simple.....(thats just my opinion, dont know about others)
Thanks...
Sent from my HTC Vision using xda app-developers app
And how about BT call audio? Is it working correctly with your Kernel? It is the only think I am missing wiht all the KitKat ROMs and it is definetely Kernel drivers fault... to be honest... the only roms that had it working since GB were those of 4.2.2...
And for me it would make a big help for my phone usage, cause I spend lot of the time in the car...
HTCDreamOn said:
@Kéno40 I'm not sure what this latency problem is, I'll compile a version without the GPU input handler implemented when I have time and see if that makes a difference. Other than that I really can't figure out why you're having a problem, it's fine for me at least. What do you mean by synchro?
Click to expand...
Click to collapse
In fact I don't use the lockscreen so when I tackpad wkae it, I arrive to the homescreen. But- I notice with it a little latency / black screen for less than half a second, but noticeable.
I cut Synchro during night because of the wifi problem. On the morning I put it back. It goes to slleep (the phone, not me ! ). If I wake up, I have a 1-2 seconds black screen.
RE: [KERNEL][DEV][ALPHA] AlterNdromadus 3.0.x KitKat CM11 | AOSB [26/02/14]
bradley_e_smith said:
I would be interested. I have compiled the lastest flinny merged with the lastest cyanogen frameworks. It boots but the camera doesn't work. So I have been looking further, but still playing around. I need to increase my virtual linux box diskspace, so I am working on reconfiguring it b/c of lack of diskspace.
Click to expand...
Click to collapse
I'm gonna try Paranoid Android, CM10.2 (Android 4.3) base unless anyone has objections to 4.3, it was stable and working as far as I remember. I don't know if 4.2.2 can be used for PA anymore.
arunal_123 said:
I would love to see AOSP KK rom for our device. Just plain and simple.....(thats just my opinion, dont know about others)
Thanks...
Sent from my HTC Vision using xda app-developers app
Click to expand...
Click to collapse
I would love pure AOSP too but unfortunately I don't have the expertise to get it working, I'm gonna try something simpler.
Kéno40 said:
In fact I don't use the lockscreen so when I tackpad wkae it, I arrive to the homescreen. But- I notice with it a little latency / black screen for less than half a second, but noticeable.
I cut Synchro during night because of the wifi problem. On the morning I put it back. It goes to slleep (the phone, not me ! ). If I wake up, I have a 1-2 seconds black screen.
Click to expand...
Click to collapse
Which ROM are you using? I think these might be issues with Flinny's alpha 1/2.
a.s.j said:
And how about BT call audio? Is it working correctly with your Kernel? It is the only think I am missing wiht all the KitKat ROMs and it is definetely Kernel drivers fault... to be honest... the only roms that had it working since GB were those of 4.2.2...
And for me it would make a big help for my phone usage, cause I spend lot of the time in the car...
Click to expand...
Click to collapse
If it doesn't work with the default kernel then it won't work with this.
TO EVERYONE: UPDATE 26/02/14: Latest Download It has 369MB of memory available to user
HTCDreamOn said:
Which ROM are you using? I think these might be issues with Flinny's alpha 1/2.
Click to expand...
Click to collapse
Alpha 3 since weeks and with it, I don't have this latency.
I reflashed Am=lpha 3 over and problem's gone!
Kéno40 said:
Alpha 3 since weeks and with it, I don't have this latency.
I reflashed Am=lpha 3 over and problem's gone!
Click to expand...
Click to collapse
That's very weird, no-one else is having that problem. What kernel settings are you using?
To everyone: UPDATE (again): https://drive.google.com/uc?export=download&id=0B6rld7atb8yHYXBDdUxMX2NacU0
Also, would people want Paranoid Android based on 4.2.2 or 4.3?
HTCDreamOn said:
That's very weird, no-one else is having that problem. What kernel settings are you using?
Click to expand...
Click to collapse
It was on V18.
Tried V19, better. Less latency but tonight I had a black screen on the 1st incoming call I had and I missed it.
Went bak on Alpha3...
WildKernel
for T-Mobile Samsung Galaxy S II
Go check out Tame! It goes great with this and it handles OTA updates for this kernel.
This is a Linux based (3.0.101) Kernel which is maintained by me kept inline with the Cyangenmod Kernel so this is compatible with ALL the latest KitKat Roms (unless otherwise stated in the ROM).
Please report anything good and bad so that I know what to keep and what not to keep for the next release. This also helps me push out fixes faster when presented with lots of information (such as logs etc.).
Please see changelogs for an in-depth look at features. Also take a look at the screenshots for a sneak peek.
Feeling like a critic? Leave a review!
Link broken? Try one of the mirrors, Still a no go? Goto my signature and click the file backups link, then navigate to what you were looking for.
v013: AFH
TRU Mirrors: #1 / #2
All Releases: AFH | TRU Mirrors
[#WildKernel-Celox-CL]
[/HIDE]
Thanks:
TeamChopsticks & CyanogenMod
TeamSXL
Cl3Kener
Team Hydra
TeamDS
faux123
Sultanxda
Tamcore
cretin45
showp1984
RomanBB
and any others I may have missed
Info on Governors/Schedulers
You may find my source hosted @ Github
There is NO need to clear caches, kernel installer handles everything. Just flash and reboot.
My recommended Governor/Scheduler setups:
Battery w/ Good Performance at 96-1350mhz:
Intellidemand/SIO (personal choice)
Lazy/SIO
Badass/SIO
Ondemand/SIO
Wheatley/SIO
'lil more Performance at 96-1512mhz:
Smartass/SIO
Hyper/Deadline
Samsung/Deadlne
lulzactive/Deadline
Savagedzed/Deadline
Best Performance (worst battery): 384-???mhz
Gaming/Deadline
Performance/Deadline
Did you read the announcement? (page header)
XDA:DevDB Information
WildKernel for the T-Mobile Galaxy S II (hercules), Kernel for the T-Mobile Samsung Galaxy S II
Contributors
Emmanuel U
Source Code: https://github.com/EmmanuelU/wild_kernel_samsung_msm8660/tree/android-msm-hercules-3.0
Kernel Special Features: Too many features to list, just install it.... now.
Version Information
Status: Stable
Current Stable Version: 013
Stable Release Date: 2015-01-29
Created 2014-05-28
Last Updated 2015-02-01
Wow I'm glad I was up late tonight! Downloaded this installed... Working cam 100% plus we can overclock again! Ole herc still running strong!! Thanks for this!!!
Thanks bro for doing this. I will flash and report
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
---------- Post added at 08:36 AM ---------- Previous post was at 08:31 AM ----------
Emmanuel, do you recommend CPU tuner or trickster or just stock performance to tweak settings?
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
Just flashed it on Carbon 5/21. Initial thoughts are that it seems to get to the boot animation quicker than Uber. But initial reboot is long... I thought my phone was stuck in a bootloop... Also does not kill vibration after subsequent reboots after the initial reboot after flashing the kernel. It's just as quick as Uber and seems to work with Kernel Tweaker. This kernel also won't crash the phone playing 1080p in portrait... Love the fact that this kernel has sleep2wake as well. Will report back after using it for the day...
Any chance of a 2ghz version? And does this work with PAC outta the box?
Edit: Forgot to say thanks for giving us another kernel for the good ol' Herc. So, thanks.
Sent from my SPH-D710 using Tapatalk 2
Not sure if its kernel related but after rebooting my phone because of play store issues. After rebooting, I lost all of my widgets that I placed on 4 screens.
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
Emmanuel U said:
WildKernel
for T-Mobile Samsung Galaxy S II
This is a Linux based (3.0.101) Kernel which is maintained by me kept inline with the Cyangenmod Kernel so this is compatible with ALL the latest KitKat Roms.
Please report anything good and bad so that I know what to keep and what not to keep for the next release. This also helps me push out fixes faster when presented with lots of information (such as logs etc.).
Please wipe cache and dalvik cache to avoid any possible issues.
Please see changelogs for an in-depth look at features. Also take a look at the screenshots for a sneak peek.
Download Latest WildKernel for Android 4.4+
Mirror (HTTP) / (FTP)
View all public kernel releases (Mirror)
Changelog:
Code:
[B]May 27, 2014 - ver001[/B]
1. Initial Release (based off Diablo 3.1 & Merged with all latest CM vidc changes to fix camera/camcorder issues)
2. [B]Voltage Table Overhaul: All clocks have noticeably reduced voltages to improve battery life without compromising performance.[/B]
3. [B]Add More GPU Scaling steps to create a new 'low power' idle and more intermediate steps until an OC[/B]
4. Various FS, IRQ, MM, Mutex patches
5. Enable All tweaks for Badass (including low-bat powersave, allow bypass etc.)
6. [B]New 'Ultra low' CPU Idle steps (96-153mhz) - Low power idling[/B]
7. Mpdecision allowed to scale down to 96mhz
8. BadAss and SIO set as default gov/sched
9. Update all Ondemand based governors to upstream (Google)
10. Update LZO (faux123)
Thanks:
TeamChopsticks & CyanogenMod
TeamSXL
Cl3Kener
Team Hydra
TeamDS
faux123
Sultan
Tamcore
cretin45
showp1984
RomanBB
and any others I may have missed
Info on Governors/Schedulers
You may find my source hosted @ Github
XDA:DevDB Information
WildKernel for the T-Mobile Galaxy S II (hercules), Kernel for the T-Mobile Samsung Galaxy S II
Contributors
Emmanuel U
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: 001
Beta Release Date: 2014-05-27
Created 2014-05-28
Last Updated 2014-05-27
Click to expand...
Click to collapse
I haven't tested this yet, but it is on my "to test" list. I'm going to download it on my lunch break and flash it sometime on the weekend. Had a quick question though: what is the recommended date of the ROM one should use with this Kernel? The ROM I'm running was last updated back in March so I am unsure if any new CM features were implemented or removed from the kernel since that time and I would rather not be stuck in a boot-loop or nothing. The kernel I'm currently sporting is "3.0.101-DIABLO-3.3". You say yours is based off of Diablo 3.1, so I THINK it should play nice with this ROM, but I'm nervous I'll soft-brick my phone.
Is there a reason you didn't use Diablo 3.3 as the base?
Also, your OP states there are screenshots, but none are included? I don't need them (kernels don't really need screenshots, eh?), but just thought I'd point it out.
Thanks for being one of the ones keeping the t989 alive.
EDIT: I'm dumb... just saw the screenshot tab at the top. 18 hours on battery is pretty good. I get about 10 with how I have things set right now, so getting an extra 8 would be awesome.
bmg002 said:
I haven't tested this yet, but it is on my "to test" list. I'm going to download it on my lunch break and flash it sometime on the weekend. Had a quick question though: what is the recommended date of the ROM one should use with this Kernel? The ROM I'm running was last updated back in March so I am unsure if any new CM features were implemented or removed from the kernel since that time and I would rather not be stuck in a boot-loop or nothing. The kernel I'm currently sporting is "3.0.101-DIABLO-3.3". You say yours is based off of Diablo 3.1, so I THINK it should play nice with this ROM, but I'm nervous I'll soft-brick my phone.
Is there a reason you didn't use Diablo 3.3 as the base?
Also, your OP states there are screenshots, but none are included? I don't need them (kernels don't really need screenshots, eh?), but just thought I'd point it out.
Thanks for being one of the ones keeping the t989 alive.
EDIT: I'm dumb... just saw the screenshot tab at the top. 18 hours on battery is pretty good. I get about 10 with how I have things set right now, so getting an extra 8 would be awesome.
Click to expand...
Click to collapse
It'll work fine with older KitKat builds.. And I don't think you'll have compatibility problems with using it with a ROM that came with a newer version of Diablo. I was at one point using older builds of Cl3kener's kernels on newer builds...
Sent from my Carbonized GS²
suaverc118 said:
Thanks bro for doing this. I will flash and report
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
---------- Post added at 08:36 AM ---------- Previous post was at 08:31 AM ----------
Emmanuel, do you recommend CPU tuner or trickster or just stock performance to tweak settings?
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I will always recommend the stock performance app as it's apart of the system so you know for a fact it won't be holding any child proccesses which may effect battery etc.
mp3deviant721 said:
Just flashed it on Carbon 5/21. Initial thoughts are that it seems to get to the boot animation quicker than Uber. But initial reboot is long... I thought my phone was stuck in a bootloop... Also does not kill vibration after subsequent reboots after the initial reboot after flashing the kernel. It's just as quick as Uber and seems to work with Kernel Tweaker. This kernel also won't crash the phone playing 1080p in portrait... Love the fact that this kernel has sleep2wake as well. Will report back after using it for the day...
Any chance of a 2ghz version? And does this work with PAC outta the box?
Edit: Forgot to say thanks for giving us another kernel for the good ol' Herc. So, thanks.
Sent from my SPH-D710 using Tapatalk 2
Click to expand...
Click to collapse
Yes it should work out of the box with ALL KITKAT roms. As for Jellybean and before I'm not 100% sure as they may and most likely use different ramdisks. Also I doubt you will see me push out a 2ghz version as I don't really like to OC, but when I do I like to stay in the OC 300-400mhz stage. Once getting above that you risk damaging your hardware overtime which can stunt it's life.
suaverc118 said:
Not sure if its kernel related but after rebooting my phone because of play store issues. After rebooting, I lost all of my widgets that I placed on 4 screens.
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
How many times did this issue occur to you? Did it happen right after kernel installation? Because it's sounding more like a rom related issue.
After about 12hrs into it, video recording added a nonstop buzzing sound in all video res. Reboot fixed the issue. See catlog. I am currently on AlpineRom.
Emmanuel U said:
Yes it should work out of the box with ALL KITKAT roms. As for Jellybean and before I'm not 100% sure as they may and most likely use different ramdisks. Also I doubt you will see me push out a 2ghz version as I don't really like to OC, but when I do I like to stay in the 300-400mhz stage. Once getting above that you risk damaging your hardware overtime which can stunt it's life.
Click to expand...
Click to collapse
I meant all older builds of KitKat ROMs. My bad. I didn't claify. I'll edit my post. And I thought I'd ask about 2ghz, it was nice when I had it...
Sent from my Carbonized GS²
woot
a wild kernal appears
Is Hyper supposed to stay a higher frequency on Core 0 when you are playing music or running an app and not doing anything else and with the screen on? I'm currently set at 1836/192 and the frequency settles more at 756 on Core 0. If I set minimum to 384 then it seems to settle more on 384. I couldn't find much info on how Hyper works so I'm just wondering if this is normal.
Sent from my Carbonized GS²
Something went very wrong....
About an hour after installing this kernel last night I picked my phone up off the table and noticed it was in a boot loop.
I went into recovery and wiped the cache and it eventually booted to the CM-11 Welcome screen asking me my language preference.
I rebooted back to recovery to restore from my backup and (long story short), I couldn't because the partition table on my external sd card has been destroyed. I don't know what would have done that I wasn't actually using the phone at the time.
Sorry I don't have logs, but if anyone knows how to recover an sd card with no partition table i'd love to hear about it. I tried gpart/gparted with no success. I assume the partition was some kind of FAT but I don't know for sure.
Last night
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
sfleury said:
About an hour after installing this kernel last night I picked my phone up off the table and noticed it was in a boot loop.
I went into recovery and wiped the cache and it eventually booted to the CM-11 Welcome screen asking me my language preference.
I rebooted back to recovery to restore from my backup and (long story short), I couldn't because the partition table on my external sd card has been destroyed. I don't know what would have done that I wasn't actually using the phone at the time.
Sorry I don't have logs, but if anyone knows how to recover an sd card with no partition table i'd love to hear about it. I tried gpart/gparted with no success. I assume the partition was some kind of FAT but I don't know for sure.
Click to expand...
Click to collapse
That happened to me a short while back using A different ROM and kernel. For me, my sd card died and I sent it back under warranty.
Sucks cause you lose all the data and no way to recover but if you can warranty it,I would.
Sent from my SM-T310 using XDA Free mobile app
bmg002 said:
That happened to me a short while back using A different ROM and kernel. For me, my sd card died and I sent it back under warranty.
Sucks cause you lose all the data and no way to recover but if you can warranty it,I would.
Sent from my SM-T310 using XDA Free mobile app
Click to expand...
Click to collapse
Ya I suspect the card has failed based on how it is behaving in my computer. I will look into warranty but I'm not very good at keeping the paperwork for such things.
sfleury said:
Ya I suspect the card has failed based on how it is behaving in my computer. I will look into warranty but I'm not very good at keeping the paperwork for such things.
Click to expand...
Click to collapse
I'm not either, but if you know where you bought it from (online sources are usually the best as you will have an email receipt) AND you have an account with them, they MAY be nice and pull your receipt up for you. Sandisks warranty info though states that you need to have your original receipt AND the original packaging. When mine died they were happy enough with a photocopy of the receipt being emailed to them and they didn't need the original packaging.
It sucks when it does die because you lose your data and you don't know if it was due to the new stuff you were trying or simply a fluke. I've been meaning to try my new stuff again on my card (moving /data to external storage), but I'm nervous that that is what killed it. It gave me a nice performance boost (surprisingly), but I only got about 2 months before things died for me
Now I back up my SD cards roughly once every 2 months just in case one dies on me again. Well, unless I make no changes OR I only add stuff I can re-download easily.
Boot loop for me, using the latest Pac Man nightly...
ricthot said:
Boot loop for me, using the latest Pac Man nightly...
Click to expand...
Click to collapse
Same here dude.. Cannot change governor or phone will freeze and then go bezerk...boot loops etc. Will not work on alpine or carbon for me
Nice, new kernel. Something to play with this weekend.
Sent from my SAMSUNG-SGH-T989 using XDA Free mobile app
ZMoD is an AOSP-based Android 5.1 ROM focused to bring the most popular features to a clean, AOSP-based ROM.
A bit of history: when 5.1 released, I was impressed by the memory management fixes it brought us - it's a lot better than 5.0 was. Since I use my phone heavily, mostly for texting with multiple apps, it was clear that I couldn't go back to 5.0 anymore - however, there were no feature-filled 5.1 ROMs yet, so an idea popped into my mind: why not create one? This is how the first version of ZMoD born.
Features
- RRO theming support
- screenshots: quick delete action
- configurable wakeup on charger connect
- configurable volume button wake
- advanced reboot
- show application's package name in the "App info" screen
- statusbar clock and date customizations
- option to hide USB debugging icon
- clock and time clickable in statusbar
- battery icon customizations
- alarm clock: increasing volume option
- alarm clock: flip and shake actions
- materialized gallery, calendar, browser and sms (not fully done yet) app
- material default wallpaper
- swipe in AOSP keyboard
Todo
- battery and notification light customizations
Instructions
First time flashing ZMoD to your maguro (or coming from another ROM)?
Unlock & install a recovery
Wipe data & cache partitions
Flash ZMoD.
Optional: Install the Google Apps addon package.
Updating from a previous build?
Just install the latest ROM zip. If you had Google Apps installed, you need to re-flash it as well.
Downloads
Latest build: see the downloads section.
Google Apps: Bugs[/SIZE]
- thin purple line(s) on the edge of some recorded videos
XDA:DevDB Information
ZMoD, ROM for the Samsung Galaxy Nexus
Contributors
[URL="http://forum.xda-developers.com/member.php?u=2633638"]Ziyan, MWisBest, freshgiammi, Everyone else who helped me: AOSP, Hashcode, ...
Source Code: https://github.com/ZMoD-R
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.0.x
Based On: AOSP
Version Information
Status: Beta
Created 2015-03-21
Last Updated 2016-02-12
Wow thanks a lot @Ziyan
Nice! Thank you very much, this is just what I have been waiting for...a 5.1 ROM with volume rocker wake support!
Kudos! @ziyan
wow! thanks a lot for making GNEX alive @Ziyan, i'll flash it right away. long live Gnex!:fingers-crossed:
Thanks ... in donwload... tomorrow I try to duty with your kernel ... but it will be a bomb, then I think I will change it to prove my kernel, I think I'll change rom to do the tests to my kernel
where can i download this? sorry im sort of new! disregard my ignorance. i guess the downloads tab is there for a reason lol
XperiaZ1Canada said:
where can i download this? sorry im sort of new
Click to expand...
Click to collapse
Up there's an instruction written by @Ziyan
Bugs?
Bugs
- offmode charging broken
- green bars on the edge of the recorded videos
Thanks alot Ziyan for keeping this phone alive and running. :good:
Just to clarify... Ziyan are those the only bugs you have come across? Are there any other bugs that we should be aware of such as graphical glitches or wifi/data issues bluetooth perhaps? Would this be considered a daily driver? Sorry about all the questions, but I really want to jump to a 5.0 rom 4.4.4 just isn't cutting it anymore. I have all kinds of ram issues all the times, forcing me to reboot my phone on a daily basis. I think this would be the perfect opportunity for me to transition to a lolipop rom, but I would like to know if this rom is stable enough for daily use.
Merio90 said:
Bugs
- offmode charging broken
- green bars on the edge of the recorded videos
Thanks alot Ziyan for keeping this phone alive and running. :good:
Just to clarify... Ziyan are those the only bugs you have come across? Are there any other bugs that we should be aware of such as graphical glitches or wifi/data issues bluetooth perhaps? Would this be considered a daily driver? Sorry about all the questions, but I really want to jump to a 5.0 rom 4.4.4 just isn't cutting it anymore. I have all kinds of ram issues all the times, forcing me to reboot my phone on a daily basis. I think this would be the perfect opportunity for me to transition to a lolipop rom, but I would like to know if this rom is stable enough for daily use.
Click to expand...
Click to collapse
done flashing. so far so good here. bugs presented above is present. but im gonna try use this rom for more days, (as same as othe LP 5.1) but as i remember from my past flsh from other roms., the more you installed apps the more it getting slow and bugs. well so far here i just installed those social media apps and its running good to me, but i couldn't say its that stable but lets just help @Ziyan and give some reports. well im not that fun on CM roms but ill give this a shot coz its the only rom who is willing to support our legacy phone and make it alive again.
This is awesome! Thanks a lot @Ziyan. I've been using your CM11 builds for a long time. But who needs CM when we have you? CM11 is way too laggy for a while - which is by no means your fault! - and all the stories about 5.1 will definitely make me part of your test group. So I'll stop writing now and start downloading.
Akosijasper said:
done flashing. so far so good here. bugs presented above is present. but im gonna try use this rom for more days, (as same as othe LP 5.1) but as i remember from my past flsh from other roms., the more you installed apps the more it getting slow and bugs. well so far here i just installed those social media apps and its running good to me, but i couldn't say its that stable but lets just help @Ziyan and give some reports. well im not that fun on CM roms but ill give this a shot coz its the only rom who is willing to support our legacy phone and make it alive again.
Click to expand...
Click to collapse
Thanks for the prompt reply. Well I think I am gonna go ahead and flash it myself. I too will report any bugs if I come across any. Hopefully it is stable enough to be a daily driver.
Merio90 said:
Thanks for the prompt reply. Well I think I am gonna go ahead and flash it myself. I too will report any bugs if I come across any. Hopefully it is stable enough to be a daily driver.
Click to expand...
Click to collapse
:good: same here so lets help @Ziyan for this :highfive:
I'm just waiting for the camera bug to be fixed which causes the camera to stop working and requires a reboot to fix it. If that's fixed, I'll be really happy to come back to LP.
i tried front cam video recording ...... sad to say i have to reboot my phone for me to use it again.. hmm.. the main bug of Gnex LP's are the camera if this will be fixed then for sure it could be stable to us Gnex users. is ther a chanve that someone can make a mod for camera and flash it to be more compatible? i mean what if the cam is not LP based. is it that possible? ( sorry for the question im not a developer)
This has been undoubtedly the best ROM I've ever flashed onto my phone. Camera bug or not, the smoothness with which it runs is almost making me doubt this is even the same phone. I am floored. Great job Ziyan and the OMAP team!
Anyone tried bsmitty karnel with this rom..?
#17
how to get root access ?
This ROM is very nice so far. It's still downloading and installing my apps which obviously takes more time since LP.
The ROM feels quite snappy, at least a bit more than recent CM11 builds. I am missing a few features such as privacy guard and quick switch between apps by pressing and holding the recent apps button. Swipe isn't working with the AOSP keyboard.
I haven't tried the camera yet. But so far so good. Really good.
I've been using this ROM for a couple of days. Really awesome ! Great work @Ziyan !
@Ziyan mwisbest fixed the offline charging, maybe you can pick the commits? http://forum.xda-developers.com/showpost.php?p=59405904&postcount=2882
A few years ago, I have been building Mackay ROM, based on CyanogenMod for a number of devices. Due to being busy at work, I have stopped with that. I recently picked it up with again with a Mackay ROM based on LineageOS.
It is actually LineageOS, with a few extras that I always miss:
-SU build into the ROM
-No hash sign when using SU
-Network traffic speed option for statusbar
-OMS Substratum theming
-OmniClock in stead of Lineage Desk Clock
The bootanimation is made by my brother. It is the family coat of arms of the Scottish Mackay clan to which my family is linked.
I try to build this ROM on a weekly basis, but it mainly depends on when interesting features are available/merged
Download:
AndroidFileHost
Installation:
-Make sure you have recent TWRP installed (3.2.1-1)
-Make sure you have recent hardware blobs from MIUI (minimum 8.1.4)
-gapps can only be flashed on clean installs
-clean install (factory reset) if coming from another ROM, dirty flash if updating
I am open to suggestions for additions, but I prefer a clean ROM, just some basic extras over stock LineageOS has always been my approach for Mackay ROMs.
Credits:
This ROM would never have been possible without the hard work of bgcngm to make LineageOS for our mi5 and the other LineageOS developers.
Source:
ROM: https://github.com/LineageOS
Kernel: https://github.com/kasperhettinga/android_kernel_xiaomi_msm8996
XDA:DevDB Information
Mackay ROM, ROM for the Xiaomi Mi 5
Contributors
kasper_h
ROM OS Version: 8.x Oreo
Based On: LineageOS
Version Information
Status: Beta
Created 2017-04-26
Last Updated 2018-04-02
Reserved
Hi, has your Mi5 experience random mobile signal drop? LTE signal drop?
Has this issue been resolved in this ROM? Thank you!
lenra06 said:
Hi, has your Mi5 experience random mobile signal drop? LTE signal drop?
Has this issue been resolved in this ROM? Thank you!
Click to expand...
Click to collapse
I don't use LTE, so I can't say for sure. In general, because this ROM follows LineageOS, it will have to deal with the same problems as well.
kasper_h said:
I don't use LTE, so I can't say for sure. In general, because this ROM follows LineageOS, it will have to deal with the same problems as well.
Click to expand...
Click to collapse
Thanks! Following up, any mobile or data signal drops encountered?
lenra06 said:
Thanks! Following up, any mobile or data signal drops encountered?
Click to expand...
Click to collapse
I use it myself in dual-SIM mode and never encounter any signal loss.
hi and thanks for this first of all. I'm surely going to try it, even just for seeing the bootanimation..i love all that matters Scotland.. your country and national anthem, rugby, braveheart etc
personally i don't use LOS for a very few and not so intrusive things i think. first of all date in status bar, like in most all other los roms. could you add it? don't think it would be too intrusive, but it is a real deal breaker for me
other thing i look for is multiple actions for HW buttons (like in RR.. show volume panel, show quick settings panel etc and not only the los standard ones) but that's secondary as i can also use a hw button remapper app for that
ah, and dt2s everywhere in lock screen would be great also!
bye will report after trying your rom!
@kasper_h wow! that is THE surprise. For the young ones in the community, Mackey kernel/rom was the goto option for our Galaxy S(1) ! Glad to have you in this part of the forum. Are you planning on getting involved with the Mi5 kernel business as well?
tested the rom quicky. enabled root in Dev settings for apps but couldn't get root access for mixplorer?
@kasper_h perhaps adding QC3 fix from this commit?
ngoralph said:
@kasper_h perhaps adding QC3 fix from this commit?
Click to expand...
Click to collapse
Thanks, I'll do a build today with that commit to see if it fixes erratic charging behaviour!
georgekav33 said:
@kasper_h wow! that is THE surprise. For the young ones in the community, Mackey kernel/rom was the goto option for our Galaxy S(1) ! Glad to have you in this part of the forum. Are you planning on getting involved with the Mi5 kernel business as well?
Click to expand...
Click to collapse
I still have my S1 lying around, but stopped developing for it long time ago.
At the moment, I first want a robust ROM being build, then I'll look into the kernel as well. On S1, performance depended a lot on the kernel, I haven't seen such spectacular results on mi5 yet.
FcukBloat said:
hi and thanks for this first of all. I'm surely going to try it, even just for seeing the bootanimation..i love all that matters Scotland.. your country and national anthem, rugby, braveheart etc
personally i don't use LOS for a very few and not so intrusive things i think. first of all date in status bar, like in most all other los roms. could you add it? don't think it would be too intrusive, but it is a real deal breaker for me
other thing i look for is multiple actions for HW buttons (like in RR.. show volume panel, show quick settings panel etc and not only the los standard ones) but that's secondary as i can also use a hw button remapper app for that
ah, and dt2s everywhere in lock screen would be great also!
bye will report after trying your rom!
Click to expand...
Click to collapse
Date in statusbar is something I may look into. I actually use the calendar status pro widget, which also gives day of month in the status bar. May other apps can do the same as far as I know.
Remapping HW buttons is not something I'm interested in
kasper_h said:
I still have my S1 lying around, but stopped developing for it long time ago.
At the moment, I first want a robust ROM being build, then I'll look into the kernel as well. On S1, performance depended a lot on the kernel, I haven't seen such spectacular results on mi5 yet.
Click to expand...
Click to collapse
That's true, kernels are more mature now, performance-wise we may not win much (save it for the 32GB Mi5 with mild OC to 2.15Ghz). However, I think that due to Xiaomi's not 'fully' functional sources, there is space for improving the functionality aka charging speed, sound quality, maybe EAS or interactive governor tuning etc. Your expertise on kernel modding would be valuable to this community as well!! thanks
kasper_h said:
Date in statusbar is something I may look into. I actually use the calendar status pro widget, which also gives day of month in the status bar. May other apps can do the same as far as I know.
Remapping HW buttons is not something I'm interested in
Click to expand...
Click to collapse
thanks for the answer! yes I'm using an app right now to visualize the date in status bar in jdc's aosp, but i don't like so much having to use an app just for that
kasper_h said:
Thanks, I'll do a build today with that commit to see if it fixes erratic charging behaviour!
Click to expand...
Click to collapse
OK, so here is a build with the QC3 patch and today's Lineage codebase. Also includes upstream OMS substratum patches:
https://www.androidfilehost.com/?fid=457095661767156880
Seems to work fine for me, will monitor charging speed in coming days.
it seems meanwhile miui released updated kernel sources with working QC code...! :victory:
FcukBloat said:
it seems meanwhile miui released updated kernel sources with working QC code...! :victory:
Click to expand...
Click to collapse
But the version now in the making for LOS still seems to suffer from problems. The latest build I posted few days ago does work with QC.
What a great surprise to see you around here! Another one who was following your work on the i9000. Great times and marvelous phone :') Hope to see more from you for the mi5, for sure trying out this, although RR is my comfort zone since november when i got the phone, hard to beat that loyalty on a phone of mine
Thank you for kasper_h for the old, present and future work!
kasper_h said:
But the version now in the making for LOS still seems to suffer from problems. The latest build I posted few days ago does work with QC.
Click to expand...
Click to collapse
thanks but I can't use this rom for the reasons i poster earlier, so I'm sticking with RR for now. i am trying the boot.img from your rom in RR though, let's see if it fixes QC in RR too for sure it did boot and everything seems to work, so already better than i thought!
Kang Kernel
About
First with my story, ~4-5 years ago in the GB/ICS/JB/KK era I used to work on AOKP, a ROM for Android devices offering a lot of features. As time went on, we all got a bit burnt out from the project, and stopped actively working on it (though if this sounds interesting, the ROM is still kicking with new developers). I worked on a few projects for a bunch of devices (HP Touchpad, HTC One X, LG G2, LG Optimus G, Nexus 4). After taking a few years off and working for an Android OEM, I got the development itch again and snagged a Pixel 2 XL, and wanted to run a kernel I built.
This is a kernel I built for my own personal use, and it will probably evolve greatly as time passes (right now it is not incredibly different from stock). My personal priorities are always battery life and responsiveness under heavy load conditions. I am a big fan of doing a quantitative analysis on various performance-related aspects of the system.
Features
Updated to Linux v4.4.127
Safetynet passing
kcal color control
Undervolted CPU steps
MAC address randomization
CFQ upstreamed to latest
CRC disabled
fsync disabled (user controllable)
Wireguard support
Support and Installation
This should be compatible with any AOSP/Stock 8.1-based ROM, though I have only tested this on the Stock 8.1 April security update.
To install this, flash the ZIP in TWRP.
I usually wipe my Dalvik/ART cache after I flash as well, so give this a go if you're experiencing excessive battery drain/other issues.
Download
Download here
Check the Downloads section of this post
Donations
I am not accepting donations for this, and I don't ever plan on accepting donations. If you would like to donate, please instead throw a couple bucks at the people listed in the "Additional Contributors" section, or donate it to a charity of your choice. I don't need money and I am simply releasing a kernel that I have built for my own personal use.
Thanks
nathanchance and the android-linux-stable project for providing a great updated base, and AnyKernel setup + being a great reference
flar2 for kcal color control
sultanxda for his Safetynet patches
franciscofranco/faux123/frap129/freak07 for other random patches
the original #teamkang for introducing me to Android development
Source
Source code
Uses kang_defconfig and the default AOSP gcc toolchain
XDA:DevDB Information
Kang Kernel, Kernel for the Google Pixel 2 XL
Contributors
rohan32, nathanchance, flar2, frap129, franciscofranco, faux123, sultanxda, freak07
Source Code: https://github.com/mathur/wahoo
Kernel Special Features: Linux v4.4.127, kcal control, Safetynet passing, Undervolted, MAC Address randomization, CFQ upstreamed, fsync/crc disabled, wireguard support
Version Information
Status: Testing
Current Beta Version: 2018.04.08
Beta Release Date: 2018-04-08
Created 2018-04-08
Last Updated 2018-04-08
Almost feel obligated to flash this. ?
akellar said:
Almost feel obligated to flash this. ?
Click to expand...
Click to collapse
Hahaha good to see you here buddy, been a long time
OMG I remember you from htc one x I think. This is amazing. Thank you good sir and welcome back.
Welcome @rohan32 :highfive:
Going stock on my replacement device tomorrow so I'll be giving this a whirl. Appreciate you sharing it and working on it. Sure do miss me some AOKP though
Nice to see you here! Kudos
How do I go from Flash kernel to this? I am on Android P stock.
trizzv said:
How do I go from Flash kernel to this? I am on Android P stock.
Click to expand...
Click to collapse
Assuming this works on P, I just flashed in twrp over flash kernel and it worked fine.
rohan32 said:
Hahaha good to see you here buddy, been a long time
Click to expand...
Click to collapse
Does this work on Android P?
Is there any reason you disabled fsync? I thought that can be potentially dangerous?
Yeah I m using it on P @trizzvt
dukat0s said:
Yeah I m using it on P @trizzvt
Click to expand...
Click to collapse
Thanks! Did you just flash over another kernel?
Also does wiping dalvik/art wipe memory?
trizzv said:
Does this work on Android P?
Click to expand...
Click to collapse
trizzv said:
Thanks! Did you just flash over another kernel?
Also does wiping dalvik/art wipe memory?
Click to expand...
Click to collapse
This might work on P, but I haven't tested it on P at all, and it doesn't include the latest updates from the P branch from Google, so there might be some compatibility issues (or might not, totally depends on the scope of the changes Google pushed with P that isnt present in the April security update branch, and I haven't gotten the chance to peek at those changes just yet ).
Wiping dalvik/ART caches does not affect memory, it basically just clears the cache that your phone builds over time launching these apps. Totally not strictly necessary though.
mykenyc said:
Is there any reason you disabled fsync? I thought that can be potentially dangerous?
Click to expand...
Click to collapse
Indeed, fsync flushes the file buffers contents to disk immediately, but incurs a small performance hit. With fsync disabled, the buffers are still flushed to disk, but just not as frequently, so there is a potential for data loss in some rare conditions, but most likely not. I definitely get someone's concern about disabling it though which is why you can toggle it via a kernel manager app .
Flashed this on my backup p2xl yesterday and the battery life has been great. I think I might move it over to my daily driver and give it a full run. Thanks!
@rohan32 - didn't you Dev for a some Nexus devices as well? I remember the name.
Great kernel. Really impressed with performance and battery life
Sent from my Pixel 2 XL using Tapatalk
piyush7243 said:
Great kernel. Really impressed with performance and battery life
Click to expand...
Click to collapse
This kernal is very good for battery life and smooth performance. Thanks to Mr Rohan for such nice kernal.
Nice so far. I just flashed over Flash. I was happy with Flash so I am sure this will be just as good. Kernel feels smooth, battery feels like it is improving, even slightly better intimacy at home which makes the wife happy. What a kernel!
Thank you @rohan32
@rohan32 i just flashed your kernel and fast charging doesn't work for me
I reported the same issue in flash kernel thread and @nathanchance figured the issue and was related to pixel having two different battery cells or like that and he fixed that.
Can you please update it?
Cheers ?
Sent from my Google Pixel 2 XL using XDA Labs
Thanks for the nice kernel. Love especially the mac randomation! Only thing missing is dtw. Would be great if you can add this gesture maybe in mai release.