Hello Guys...
This is my first work on Symphony W90. It's TWRP 2.5.0.0 For Symphony W90.
Disclaimer:
Installing Custom Recovery For your Phone Voids warranty. I am not be Responsible For any
Damage or in any matter
Requirements:
Root and MOBILE UNCLE TOOLS APP
Instructions:
1.Download Mobileuncle Tools from attachment and install
2.Download the twrp2.5.0.0.zip extract it and Put it in root of your SDCARD
3.Open Mobile uncle tools and select Recovery Update
4.Flash my recovery.img file
5.Done
6. To boot into recovery, power off the phone then hold VOLUME UP+POWER Button until the TeamWin logo is showed
Credits:
Bruno Martins & Yuweng
TeamWin for their amazing Recovery
Good news, I have also ported cwm for the device. Follow the instructions,
Instructions:
1.Download Mobileuncle Tools from 1st posts attachment and install
2.Download the cwm5.5.0.4.zip from this attachment extract it and Put it in root of your SDCARD
3.Open Mobile uncle tools and select Recovery Update
4.Flash the recovery.img file
5.Done
6.To boot into recovery, Power off the phone then hold VOLUME UP+POWER Button until the recovery comes up
Creadits:
Koushik Dutta for his ClockworkMod recovery:
This post is Intentionally left blank
any jb rom available
i am using w90 for almost 8 months and now want a JB rom for it, can you please provide one and give the instruction to flash it,
zamilhn said:
Good news, I have also ported cwm for the device. Follow the instructions,
Instructions:
1.Download Mobileuncle Tools from 1st posts attachment and install
2.Download the cwm5.5.0.4.zip from this attachment extract it and Put it in root of your SDCARD
3.Open Mobile uncle tools and select Recovery Update
4.Flash the recovery.img file
5.Done
6.To boot into recovery, Power off the phone then hold VOLUME UP+POWER Button until the recovery comes up
Creadits:
Koushik Dutta for his ClockworkMod recovery:
Click to expand...
Click to collapse
shamim0318 said:
i am using w90 for almost 8 months and now want a JB rom for it, can you please provide one and give the instruction to flash it,
Click to expand...
Click to collapse
I have one problem with your installation steps. My W90 has no volume buttons, so how to get into recovery mode?
i found this http://forum.xda-developers.com/showthread.php?t=2281574 and want to install it just no idea how to flash a mod
jdjawad said:
i found this http://forum.xda-developers.com/showthread.php?t=2281574 and want to install it just no idea how to flash a mod
Click to expand...
Click to collapse
To flash the mod (Based of the instructions included in the thread):
1. Download the file
2. Transfer the downloaded file to your sd card
3. Reboot into recovery mode
4. Flash the mod in recovery mode (Either CWMR or TWRP)
5. Reboot
After following that procedure the mod should now be installed. Let me know if you still have questions .
1. Experia Rom by Jarey (2.3.5/2.3.6)
2. Gingerblaze v1.2 by Sir Bazte (2.3.5)
3. Bravia_Experia (2.3.5 / 2.3.6)
NOTE:
-- your device should have CWM RECOVERY installed and already ROOTED
-- to be able to flash/install the roms below SUCESSFULLY and to avoid BOOTLOOPS, your CWM RECOVERY should be ver. 5.0.2.8..
-- if your CMW recovery's not yet 5.0.2.8, download cwm recovery of mark then flash it..
>> https://www.dropbox.com/s/dfvth3ep9o8bu1u/CMW_recovery_by_mark.zip
how to flash CWM recovery:
1.place the zip file(CMW_recovery_by_mark.zip) to sd card
2.shutdown your device and go to recovery mode (press vol up+ power)
3.select "install zip from sdcard" then select "chose zip from sdcard"
4.locate the CMW_recovery_by_mark.zip then after selecting it press the menu key.
5.wait until installing process done "!"
6.turn off or shutdown for the next steps on flashing/installing ROM on your device
************** 1 ******************
EXPERIA ROM BY JAREY
xperia rom
>>>2.3.5 ----->> https://www.dropbox.com/s/6dz7b4vlwjmcbip/XPERIA_rom_JAREY_for_235.zip
>>> 2.3.6 ------>>>> http://www.mediafire.com/download/50kaxa914ci1yxz/2013-07-13.13.46.07.rar
how to:
1.AFTER DOWNLOADING EXTRACT THE FILES
note: it should look like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2.ON YOUR SDCARD FIND THE FOLDER NAMED CLOCKWORKMOD (THEN YOU WILL SEE THERE BACKUP FOLDER)
3.PUT THE EXTRACTED FILES ON THE BACKUP FOLDER
4.SHUT DOWN UR DEVICE AND PUT IT ON CWM RECOVERY MODE ( press vol up+ power together)
5.WIPE ALL DATA/FACTORY RESET AND WIPE CACHE PARTITION
6.GO TO BACK UP AND RESTORE
7.CHOOSE RESTORE THEN CLICK YES
8.WAIT FOR IT TILL IT SAY RESTORATION COMPLETE
9. REBOOT YOUR DEVICE
thanks to the creator of rom SHINJAREY
and SERGEY for porting the rom
one more thing in order to use the WIFI on thisROM you need to put some commands using TERMINAL EMULATOR
>>> https://www.dropbox.com/s/34y7d372k5oavpy/Terminal Emulator_1.0.52.apk
su
busybox mount /system -oremount,rw
chown 1002.1002 /system/etc/dbus.conf
chown 1014.2000 /system/etc/dhcpcd/dhcpcd-run-hooks
busybox mount /system -oremount,ro
************** 2 *****************
GINGERBLAZE V1.2 by SIR BAZTE (2.3.5)
https://www.dropbox.com/s/101vpno0wkfk94e/GingerBlaze 1.2.zip?m
>>> superuser zip
https://www.dropbox.com/s/7cvriixu7ylp4ya/Superuser-3.1.2_-efghi-signed.zip
how to flash:
- Download the rom transfer it to the root of your SD Card
- Reboot the phone in Recovery Mode (power + volume up)
-Perform a Nandroid Backup of your current Rom (Optional but highly recommended)
- wipe ALL
* wipe data/factory reset
*wipe cache partition
*wipe Dalvik-cache
- Flash zip from sdcard
- choose zip from sdcard
- After flashing this ROM,flash SuperUser
- Install zip from sdcard
- Choose zip from sdcard.
- locate superuser zip
- Then choose YES
-wait till its done then reboot..
credit to sir BAZTE
dont forget to say THANKS
*****************************************************************
BRAVIA_EXPERIA
REQUIREMENTS
*Device should have CWM recovery Installed(ver.5.0.2.8) and Rooted
>>> if not yet rooted and no cwm recovery follow this link >>>> http://forum.xda-developers.com/show....php?t=2433162
*ROM
2.3.5 >>> https://disk.yandex.com/public/?hash...Q%3D&locale=en
2.3.6 >>> www.mediafire.com/download/teb8w0l6fd6pvkt/Bravia_Xperia.2.3.6.zip
HOW TO:
1. After downloading the zip rom, put it on your SDCARD
2. turn off your device and put it into recovery mode ( volup + power)
3. Wipe Data/factory reset
4. Wipe Cache Partition
5. Install zip from Sdcard
6. choose zip from sdcard
7. Locate the rom(zip file)
8. Confirm install
9. wait till installation COMPLETE
10.. Done
MORE CUSTOM ROMS
for 2.3.5
http://forum.xda-developers.com/showthread.php?p=48511583#post48511583
for 2.3.6
http://forum.xda-developers.com/showthread.php?p=49016464#post49016464
thanks to the developer en porter..
SHINJAREY
MARK RANUDA
BANJO
MANUEL CABALLERO
BAZTE
SERGEY
BHAVIK
DONT FORGET press THANKS METER ^_^..
Thnx for the ROMs :good: .....
But i have a problem rooting my phone OT-918(without any thing) when i flash the recovery.img this error pops up
"Eboot error 16008
android partition size changed..... etc"
and the flashing progres doesnt start
i have rooted before with the same pc and the same drivers installed but after boot fail i reinstall stock rom with alcatel upgrade tool and after that cant root it cuz of the error 16008.... can any one help me plz ......thnx in advance
Bassem.Outlandish said:
Thnx for the ROMs :good: .....
But i have a problem rooting my phone OT-918(without any thing) when i flash the recovery.img this error pops up
"Eboot error 16008
android partition size changed..... etc"
and the flashing progres doesnt start
i have rooted before with the same pc and the same drivers installed but after boot fail i reinstall stock rom with alcatel upgrade tool and after that cant root it cuz of the error 16008.... can any one help me plz ......thnx in advance
Click to expand...
Click to collapse
i think u used the wrong scatter.. if you are 2.3.6,, u also used 2.3.6 scatter
about the tweaks
zatanika said:
1. Experia Rom by Jarey (2.3.5/2.3.6)
2. Gingerblaze v1.2 by Sir Bazte (2.3.5)
3. Bravia_Experia (2.3.5 / 2.3.6)
NOTE:
-- your device should have CWM RECOVERY installed and already ROOTED
-- to be able to flash/install the roms below SUCESSFULLY and to avoid BOOTLOOPS, your CWM RECOVERY should be ver. 5.0.2.8..
-- if your CMW recovery's not yet 5.0.2.8, download cwm recovery of mark then flash it..
>> https://www.dropbox.com/s/dfvth3ep9o8bu1u/CMW_recovery_by_mark.zip
how to flash CWM recovery:
1.place the zip file(CMW_recovery_by_mark.zip) to sd card
2.shutdown your device and go to recovery mode (press vol up+ power)
3.select "install zip from sdcard" then select "chose zip from sdcard"
4.locate the CMW_recovery_by_mark.zip then after selecting it press the menu key.
5.wait until installing process done "!"
6.turn off or shutdown for the next steps on flashing/installing ROM on your device
************** 1 ******************
EXPERIA ROM BY JAREY
xperia rom
>>>2.3.5 ----->> https://www.dropbox.com/s/6dz7b4vlwjmcbip/XPERIA_rom_JAREY_for_235.zip
>>> 2.3.6 ------>>>> http://www.mediafire.com/download/50kaxa914ci1yxz/2013-07-13.13.46.07.rar
how to:
1.AFTER DOWNLOADING EXTRACT THE FILES
note: it should look like this
2.ON YOUR SDCARD FIND THE FOLDER NAMED CLOCKWORKMOD (THEN YOU WILL SEE THERE BACKUP FOLDER)
3.PUT THE EXTRACTED FILES ON THE BACKUP FOLDER
4.SHUT DOWN UR DEVICE AND PUT IT ON CWM RECOVERY MODE ( press vol up+ power together)
5.WIPE ALL DATA/FACTORY RESET AND WIPE CACHE PARTITION
6.GO TO BACK UP AND RESTORE
7.CHOOSE RESTORE THEN CLICK YES
8.WAIT FOR IT TILL IT SAY RESTORATION COMPLETE
9. REBOOT YOUR DEVICE
thanks to the creator of rom SHINJAREY
and SERGEY for porting the rom
one more thing in order to use the WIFI on thisROM you need to put some commands using TERMINAL EMULATOR
>>> https://www.dropbox.com/s/34y7d372k5oavpy/Terminal Emulator_1.0.52.apk
su
busybox mount /system -oremount,rw
chown 1002.1002 /system/etc/dbus.conf
chown 1014.2000 /system/etc/dhcpcd/dhcpcd-run-hooks
busybox mount /system -oremount,ro
************** 2 *****************
GINGERBLAZE V1.2 by SIR BAZTE (2.3.5)
https://www.dropbox.com/s/101vpno0wkfk94e/GingerBlaze 1.2.zip?m
>>> superuser zip
https://www.dropbox.com/s/7cvriixu7ylp4ya/Superuser-3.1.2_-efghi-signed.zip
how to flash:
- Download the rom transfer it to the root of your SD Card
- Reboot the phone in Recovery Mode (power + volume up)
-Perform a Nandroid Backup of your current Rom (Optional but highly recommended)
- wipe ALL
* wipe data/factory reset
*wipe cache partition
*wipe Dalvik-cache
- Flash zip from sdcard
- choose zip from sdcard
- After flashing this ROM,flash SuperUser
- Install zip from sdcard
- Choose zip from sdcard.
- locate superuser zip
- Then choose YES
-wait till its done then reboot..
credit to sir BAZTE
dont forget to say THANKS
*****************************************************************
BRAVIA_EXPERIA
REQUIREMENTS
*Device should have CWM recovery Installed(ver.5.0.2.8) and Rooted
>>> if not yet rooted and no cwm recovery follow this link >>>> http://forum.xda-developers.com/show....php?t=2433162
*ROM
2.3.5 >>> https://disk.yandex.com/public/?hash...Q%3D&locale=en
2.3.6 >>> www.mediafire.com/download/teb8w0l6fd6pvkt/Bravia_Xperia.2.3.6.zip
HOW TO:
1. After downloading the zip rom, put it on your SDCARD
2. turn off your device and put it into recovery mode ( volup + power)
3. Wipe Data/factory reset
4. Wipe Cache Partition
5. Install zip from Sdcard
6. choose zip from sdcard
7. Locate the rom(zip file)
8. Confirm install
9. wait till installation COMPLETE
10.. Done
thanks again to SERGEY( who ported the rom to 2.3.5)
and SHINJAREY for the ROM
DONT FORGET press THANKS METER ^_^..
Click to expand...
Click to collapse
how about the tweaks?
---------- Post added at 12:53 PM ---------- Previous post was at 12:48 PM ----------
how can i flash the tweaks in bravia_xperia? is there's a tutorial?
[/COLOR]how can i flash the tweaks in bravia_xperia? is there's a tutorial?[/QUOTE]
what tweaks u were reffering sir?
Does this Roms work for both 918D and 918N?
harrycaine said:
Does this Roms work for both 918D and 918N?
Click to expand...
Click to collapse
sir it says 2.3.5 and 2.3.6.. so it means yes..
Thanks you
wos82c said:
Thanks you
Click to expand...
Click to collapse
welcome... ^_^
how bout me in my custom recovery no install.zip menu? i had only update.zip so how can i install cwm in my alcatel 918n please help me
zatanika said:
sir it says 2.3.5 and 2.3.6.. so it means yes..
Click to expand...
Click to collapse
918D & 918N have more differences than the android version, i.e. base band
Zip verification failed
WHEN TRYING TO FLASH "CMW_recovery_by_mark"
IT SAYS
E :WRONG DIGEST
META-INF/COM/GOOGLE/ANDROID/UPDATER-SCRIPT
E:VERIFICATION FAILED
ZIP VERIFICATION FAILED
ZIP ISN'T SIGNED CORRECTLY
INSTALLATION ABORTED
HOW TO PROCEED ?
im having bootloops with bravia experia rom, i have followed the steps in order. tihs is not my firts time to install custom rom with this phone. can somebody help me thanx
Android
Android
efhra052187 said:
how bout me in my custom recovery no install.zip menu? i had only update.zip so how can i install cwm in my alcatel 918n please help me
Click to expand...
Click to collapse
go to this thread sir before flashing rom
http://forum.xda-developers.com/showthread.php?t=2433162
ambroochizafer said:
WHEN TRYING TO FLASH "CMW_recovery_by_mark"
IT SAYS
E :WRONG DIGEST
META-INF/COM/GOOGLE/ANDROID/UPDATER-SCRIPT
E:VERIFICATION FAILED
ZIP VERIFICATION FAILED
ZIP ISN'T SIGNED CORRECTLY
INSTALLATION ABORTED
HOW TO PROCEED ?
Click to expand...
Click to collapse
dowload again sir mark cwm i updated it,, reflashed it again.. ^_^
jheb0y said:
im having bootloops with bravia experia rom, i have followed the steps in order. tihs is not my firts time to install custom rom with this phone. can somebody help me thanx
Click to expand...
Click to collapse
sir are you sure the rom you used is same as your device version? ( 2.3.6 custom roms for 2.3.6 device)
is your cwm recovery version is 5.0.2.8
make sure that you meet the requirements above then try to reflash again the rom.. ^_^
Custom Roms for 2.3.5 ONLY
FOR 2.3.5 ONLY
REQUIREMENTS:
your device should have
--> UPDATED cwm recovery installed / ver 5.0.2.8 (mark ranudas recovery or sergey recovery )
--> rooted device
failed to accomplished requirements above might bricked your device
MARK RANUDA
* ICS 2.3.5v1
http://www.mediafire.com/download/kst140gyoglh2nn/ICS2.3.5v1.zip
requirements:
1.Rooted
2.Custom Recovery Installed
3.SD card Partitioned ( Fat32 & Ext2 )
how to:
1.Copy ICS2.3.5v1.zip to sd card
2.Reboot to Custom recovery
3.Wipe data,dalvik cache and sd ext
4.Then Flash it.
5.wait fo the installation complete ..REBOOT.. done
Flashable Background
--}BG1 -- http://www.mediafire.com/download/g23tke21zerjvqp/BG1.zip
--}BG2 -- http://www.mediafire.com/download/mr8o9dl5mxzd9gf/BG2.zip
--}BG3 -- http://www.mediafire.com/download/ih2lnfgmhbegbh8/BG3.zip
how to:
go to cwm recovery
install zip from sdcard
choose the bg you wanted
flash it
wait till complete...done
FC Issue
MTK CPU control license verification removal
-use lucky patcher
-run it then click CPU control
-Open menu of patches
-Remove license verification
-Auto modesnext
put checks on Auto mode andt other patches(Extreme mode)
Click Aplly..done
* ICS 2.3.5v2
http://www.symbianize.com/showthread.php?t=889483
how to:
1.after downloading place the Copy of ICS2.3.5v2.zip to sd card
2.Reboot to Custom recovery
3.Wipe data,dalvik cache and sd ext
4.Flash it..
5.wait fo the installation complete ..REBOOT.. done
LINK TO ENABLE INT2EXT:
http://www.mediafire.com/download/0608ou5xb6unexy/Enable-INT2EXT+.zip
* JD_V3_odex_rom
http://www.mediafire.com/download/ctot5bnh8nayjta/Jellydroid_V3_odex_rom_by_mark-2.3.5.zip
how to:
1. Download & Place Jellydroid_v3_odex_by_mark.zip rom in your SD Card
2. TURN OFF ur DEVICE & Go to Recovery Mode.
3.Install Zip From SD > choose "Jellydroid_v3_odex_by_mark.zip" & Yes.
4. Wait for the installation process finished...DONE
SHINJAREY
* BRAVIA_EXPERIA V4
http://www.mediafire.com/download/rmvdka0vmbvuamr/Bravia_Xperia..v4-2.3.5-signed.zip
how to:
1.DownLoad bravia xperia v4 en put it on your SDcard
2.TURN OF YOUR DEVICE GO TO CWM RECOVERY (press together vol up+power)
3.WIPE DATA FACTORY RESET
4.WIPE ALL CACHE PARTITION
5.GO TO ADVANCE & WIPE DALVIK CACHE/BATTERY STATS
6.INSTALL ZIP SD CARD
7.CHOOSE.ZIP
8.CHOOSE BRAVIA_XPERIA BY-JAREY.ZIP
9.OK (installation)
10 wait for installation complete.. REBOOT...done
* GINGERBEAN V2
http://www.mediafire.com/download/6djqobsxphlwbf1/GingerbeanV2+by-jarey-2.3.5-signed.zip
how to:
1.DL gingerbean
2.PUT IT IN YOUR ROOT OF SD CARD...
3.GO TO CWM RECOVERY
4.WIPE DATA FACTORY RESET..
5.WIPE ALL CACHE PARTITION AND DALVIK CACHE/BATTERY STATS
6.INSTALL ZIP SD CARD
7.CHOOSE.ZIP
8.CHOOSE GINGERBEAN BY-JAREY.ZIP
9.OK (installation)
10 wait for installation complete....11.REBOOT....done
*ZHYDROIDv1
http://www.symbianize.com/showthread.php?t=854024
how to:
1.Alcatel OT 918M/N/D 2.3.5
2.Must be Rooted
3.Custom Recovery installed
4.Download the zip put it on your sd card
5.Already have an SD ext or Double Partition Fat32/Ext2
6.Do a full wipe,dalvic cache,data,sd ext
7.Then flash it..^^
8.after installation complete.. REBOOT
ported roms by SIR BAZTE
https://www.facebook.com/groups/237333346380882/permalink/466966280084253
or
*Lenovo Fujian
http://www.mediafire.com/download.php?m3phbyo7317bock
note: to change chinese language to default english here how..
Before you flash the zip file edit the build prop inside Look for the line(see below)
ro.product.locale.language=zh
change "zh" to "en"
save and apply the changes
put it back inside the zip file
flash it
*Lenovo P70
http://www.mediafire.com/?ljphuxa2n5hbuzx
*Micromax A75
http://www.mediafire.com/download.php?12dwlyh4o2irci5 HOW TO:
how to flash lenovo fujijan / lenovo p7o / micromax a75
*Wipe data/factory reset
*Wipe dalvik cache
*Install zip from sd
*Choose zip
*Locate the zip file ,flash it
*wait till installation complete...Reboot
BANJO
YONIP CYANOGEN MOD
https://www.facebook.com/notes/alca...alcatel-918n-235-by-banjo0917/475287262585488
YONIP ROM
https://www.facebook.com/groups/237333346380882/permalink/468154073298807
HOW TO INSTALL:
1. Install YONIP Alcatel 918N CM-ROM via recovery;
2. Reboot to System and let system initialized;
3. Reboot to Recovery;
4. Install Market Download FIX;
5. Reboot...ENJOY
SERGEY MELNIKOV
*2.3.6 over 2.3.5
http://yadi.sk/d/p2vnN_4X10x21
*2.3.6 over 2.3.5 tiny
http://yadi.sk/d/cB5bW0wl12BKR
how to:
put it on ur sdcard
then flash it
wait till intallationcomplete...
REBOOT
ANDREAD 3.2 (2.3.5)
https://www.facebook.com/notes/alcatel-ot-918n-users/andread-32-for-alcatel-918n-235/396630220451193
or
http://www.4shared.com/zip/8hLXUjQb/Andread_32_i2e.html
howto install:
1) microsd must be partition before installation (first partition primary FAT32, second partition primary EXT2)
2) I suggest to do a cleaning install. after installation of this rom you must install all into your device.
DO NOT USE BACKUP
3) wait until phone is on than reboot again phone
LEWA 2.3.5
http://turbobit.net/1wtsokyk0tuq.html
how to:
1. Download ROM & extract it using WinRar in PC.
2. copy that folder to your Memory Crad in below Location.
Memory Card > clockworkmod > backup > ***Copy Here***
3. Reboot your Phone in Clockworkmod Recovery.
4. Wipe Data... Wipe Cache ... Wipe Dalvik Cache.
5. Go to Backup & Restore > Restore.
6. Select "LeWa_ROM_2.3.6_Bhavik_Barai" & Restore It.
7. Reboot your Device & Enjoy
>>> md5 MISMATCH????????????
go to root explorer "clockworkmod/backup/file"
look for nandroid.md5
longpress then "open in text editor"
erase it content then save it..
go to cwm recovery then restore it..
reboot
or
.......If the above steps failed, do the procedure below
go to root explorer "clockworkmod/backup/file"
look for nandroid.md5
longpress then "open in text editor"
deleted the file and create a new file with the same name
save it then restore tru cwm recovery
reboot
credits to all DEVELOPER and PORTER
Alcatel 4030X
it work with Alcatel onetouch spop 4030x??:fingers-crossed:
Dominik940 said:
it work with Alcatel onetouch spop 4030x??:fingers-crossed:
Click to expand...
Click to collapse
no sir .. for alcatel 918 only
Unofficial TWRP Upstream for herolte
- TWRP 3.3.0-0
- Built on top of latest kernel source and upstreamed to 3.18.138
- Support for Samsung ROMs and can mount data after using them
- Code was cleaned up a lot and it should be more stable.
Credits to Ivan Meler for kernel and device sources and exynos-linux-stable for the upstreaming of linux kernel for our devices.
Instructions:
How to install TWRP recovery.img
1. Boot into an existing TWRP build
2. Download recovery image.
3. Copy TWRP image to your device
3. Click the 'Install' button
4. Click the 'Install Image' button
5. Navigate to where you downloaded the image and click on it
6. Select 'Recovery' partition option from the list, and swipe to confirm flash
7. Reboot back into recovery and you'll be in the updated recovery.
--
How to install Odin recovery.tar
1. Download Odin3 v3.13.1
2. Download Odin flashable
4. Restart your device in to Download mode (by holding Vol- & Home & Power)
5. Connect your device to your computer
6. Click 'AP' and select the .tar image you downloaded
7. Click the 'Start' button to flash the recovery
8. Reboot into recovery (by holding Vol+ & Home & Power) after successful flash.
Downloads:
16-04-19
————-
TWRP recovery.img
Odin recovery.tar
Sources: https://gitlab.com/developerlukeroms/twrp-hero
Riiii
I Will Sacrifice For Those I Love [emoji3436]
Rec
It's a quick guide for flashing custom ROMs, especially for Android 10
Files to download
Recovery img
https://androidfilehost.com/?fid=4349826312261779448
Recovery zip
https://sourceforge.net/projects/shrp/files/laurel_sprout/
Flashing guide
If you're coming from stock android 9, flash android 10 in both slot a & b,
1. For flashing android 10, follow this guide
https://forum.xda-developers.com/mi-a3/how-to/guide-how-to-flash-stock-recovery-rom-t4078773
Note : If you're already on android 10, skip step 1
2. Flash recovery IMG
fastboot flash boot SHRP_v2.2_laurel_sprout.img
3. reboot to recovery by pressing power & volume up key for 5-10sec
4. Wipe data/factory reset in SHRP recovery
5. flash ROM zip and SHRP recovery zip
6. reboot recovery
7. flash gapps zip
8. reboot system
9. Enjoy
If you have any doubt, read the steps twice
Credits
SHRP team for recovery
Note:
SHRP img is dump img, so that I uploaded in afh
I'm not mirroring official SHRP img
Hit thanks ? it encourage me to create more like this
Reserved
Rajendran Rasa said:
Reserved
Click to expand...
Click to collapse
I am new to this recovery thing so can you explain 2 step a little bit more.
And after this is my mi a3 is rooted??
In case you ask "i am doing this to install miui 12 on mia3