Related
LU6200 official mobile phones LU620160_00 official ROM version, this official release
Attention. USB 4.0 debugging state must not connect the usb to adjust is known:
1, Language: Korean, English;
2, and we look dragon has been the ICS 4.0.4;
3, text messaging is no problem
4, not ROOT
Preparation:
ROM: http://csmg.lgmobile.com:9002/swdata/WEBSW/LGLU6200/ALGTBK/LU620160_00/LU620160_00.kdz
Tool:
a; Download and install LG Update: http://csmg.lgmobile.com:9002/client/app/B2CAppSetup.exe,
b; download Flastool: http://dl.dropbox.com/u/43909377/FlashTool.1.0.54.zip then extract (eg d: \ FlashTool):
c; Driver .... you do not have http://115.com/file/aq1qbb3n
d, WindowsEnablerv1.1.zip: http://dl.dropbox.com/u/43909377/WindowsEnablerv1.1.zip
Photos:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Guide image:
2, the FLASH FW:
Cable into the PC and phone theft: USB Debugging and select Unknow soure slightly.
Unzip and run Windows Enabler.exe WindowsEnablerv1.1.zip, Click on the icon in the taskbar to switch On (see figure below)
Run File d: \ FlashTool \ UpTestEX.exe
This step is the "Start Upgrade" you do not choose. you start by choose " Normal Web update test" : D
This step may choose another Language replaced by Chinese:
Start running:
If errors occur, then you put the machine on the DOWNLOAD MODE (remove the battery, theft cable, press the "volume" with "Power Button" few seconds)
wait until this is done : D
If you have error, you can post in this topic
thank!
My phone stuck on U+ Lte logo after update :s
innocentrose said:
My phone stuck on U+ Lte logo after update :s
Click to expand...
Click to collapse
You only need a hard Reset , shut down your phone , hold volum down and power , make a hard reset and you good to go
thumbs up...
its working now, loving ICS, but hate the 80 character limit in sms, is there a workaround for that ???
You can use gosms to get around the limit!but you also need to set the correct SMS center number.
Ahhhh..... with GOSms the limit increases to 147 characters... above 147 characters the sms sending fails...
Sent from my LG-P930 using XDA
try handsent/handcent? sms. it should be able to do 160
aymen_ben_ammar said:
You only need a hard Reset , shut down your phone , hold volum down and power , make a hard reset and you good to go
Click to expand...
Click to collapse
I did that but I am stuck with the little green robot and the blue line below forever now...
---------- Post added at 05:51 PM ---------- Previous post was at 05:17 PM ----------
nvm, just rebooted again and it loaded
edge808 said:
try handsent/handcent? sms. it should be able to do 160
Click to expand...
Click to collapse
wow....
handcent can send an sms of as many characters i want, even more than 160
it automatically adjusts them into splitted msgs i think
---------- Post added at 04:09 PM ---------- Previous post was at 04:06 PM ----------
so now i am on official ICS with everything working except root...
i upgraded from a rooted P930 rom on LU6200 to ICS 4.0.4 and tried the root method stated in the P930 rom guide but it didnt work, tried unlockroot as well but it also didnt work. just waiting for something new to come up...
innocentrose said:
wow....
handcent can send an sms of as many characters i want, even more than 160
it automatically adjusts them into splitted msgs i think
---------- Post added at 04:09 PM ---------- Previous post was at 04:06 PM ----------
so now i am on official ICS with everything working except root...
i upgraded from a rooted P930 rom on LU6200 to ICS 4.0.4 and tried the root method stated in the P930 rom guide but it didnt work, tried unlockroot as well but it also didnt work. just waiting for something new to come up...
Click to expand...
Click to collapse
me too. root and cwm please..........
I just found out that i cant receive or send any SMS. I use GO SMS, but i also cant find a stock SMS app on my phone.
Any help?
Cromson said:
I just found out that i cant receive or send any SMS. I use GO SMS, but i also cant find a stock SMS app on my phone.
Any help?
Click to expand...
Click to collapse
Well, I think you already know this, but it's probably because of incorrect APN settings.
No, APN settings are working. I did accidently delete message.apk... NoBloat did not make any backup's, only empty folders. But i think got it back now. Thanks...
Please send good link for firmware !!! original is dead..
TNX
Cris
domnulv said:
Please send good link for firmware !!! original is dead..
TNX
Cris
Click to expand...
Click to collapse
Here you can download the engineer version of ICS, works perfectly with ROOT & CWM. After flashing this you can flash any latest ICS and root it.
LU620042_00.kdz_cromson_115.com
Can't hook back to the network after lost signal
I flashed the official ICS successfully and installed the latest firmware update to it too, but every time I lose signal (elevator, tunnel, etc.), the phone can't hook back up to the network, so I stay out of reach until I notice it and turn the 3G/4G toggle in the notificaiton bar on/off once, then it hooks back up to the network. Any ideas?
croc2 said:
I flashed the official ICS successfully and installed the latest firmware update to it too, but every time I lose signal (elevator, tunnel, etc.), the phone can't hook back up to the network, so I stay out of reach until I notice it and turn the 3G/4G toggle in the notificaiton bar on/off once, then it hooks back up to the network. Any ideas?
Click to expand...
Click to collapse
Which firmware version did you flash and which provider are you on?
Did you try use 2G Network only (just for testing)?
Cromson said:
Which firmware version did you flash and which provider are you on?
Did you try use 2G Network only (just for testing)?
Click to expand...
Click to collapse
thanks, bro, I typed 5457 # * 6200 # in the keypad, and the phone was set on the "Global + LTE" option by dedault, so I changed it to Auto GSM/WCDMA, since my provider doesn't yet have an LTE network up and running, and now all is well It seems that it has just been searching for an LTE network first, and when it couldn't find it, just hung and stayed out of service...
Cromson said:
Here you can download the engineer version of ICS, works perfectly with ROOT & CWM. After flashing this you can flash any latest ICS and root it.
LU620042_00.kdz_cromson_115.com
Click to expand...
Click to collapse
can mirror this link please? can't seem to download it..
Hello,
How to download this file http://csmg.lgmobile.com:9002/swdata/WEBSW/LGLU6200/ALGTBK/LU620160_00/LU620160_00.kdz do you have a mirror link? I was not able to download this because i got this error message
Forbidden
Your client is not allowed to access the requested object.
My Phone LG Optimus LTE HD LU6200 is using this firmware but its network locked and i want to bring it back to orignal but i can download this file. Would anyone help me to get this file?
EDIT: If you're missing iZat (read below to see if you already have it) I may have found a way to install it at http://forum.xda-developers.com/showpost.php?p=54558037&postcount=11, requires root though!
So I heard on reddit about this Qualcomm iZat, which is meant to improve the GPS location your phone gets, seems some people have it and some people don't.. I'm one of the people who don't
It sounds like all the chipsets have it though, just some phones don't have it enabled. My D855 doesn't have it, but on reddit it seems some people with the Sprint model have it and some others with the same model don't.
You can check if you have it by going to Settings -> Location -> Mode and underneath the standard options there'll be an Enhanced Location section where you can enable iZat.
If anyone here has it and wants to help us who don't out, uploading your /system/build.prop would be appreciated (it looks like theres some iZat settings in there)
If you could also check your apps to see if theres a Qualcomm iZat app installed that'd be swell
Nope, i don't have it i think?
Got a D855 (16GB) but no extra option whatsoever
Not seeing it in either of the locations you mentioned. (AT&T D850 here.)
harveydwijs2 said:
Nope, i don't have it i think?
Got a D855 (16GB) but no extra option whatsoever
Click to expand...
Click to collapse
geekaren said:
Not seeing it in either of the locations you mentioned. (AT&T D850 here.)
Click to expand...
Click to collapse
Well that's strange, I wonder why they're only enabling it on certain phones
For reference I found out about it from http://www.reddit.com/r/LGG3/comments/2c3k3s/lg_g3_and_geocaching_how_is_the_gps/cjbm9q0
Sounds like at least 3 people there have it, one on Sprint, one on Verizon and I don't know about the other one. Hopefully someone on XDA has it too and could maybe help us figure out how to get it ourselves.
AT&T G3 here, no iZat that I have found, even looking around rooted.
I'm on Sprint and I have it, I would upload the build.prop for you guys but I believe I need root and Sprint doesn't have root yet.
Sent from my LGLS990 using XDA Premium 4 mobile app
D855 european 3/32GB here, and I don't have it (I'm still on firmware 10a) but GPS works great, is very quick and accurate, no problem.
how to tell if you have one?
i see this line in my build.prop
ro.qc.sdk.izat.premium_enabled=0
ro.qc.sdk.izat.service_mask=0x0
Click to expand...
Click to collapse
deadh0b0 said:
I'm on Sprint and I have it, I would upload the build.prop for you guys but I believe I need root and Sprint doesn't have root yet.
Sent from my LGLS990 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ah well hopefully a root will show up soon, although maybe it's inside your KDZ too, could you maybe go to http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=*********** and change the stars to your IMEI, and copy the sw_url path here so we could take a look into it?
cnn888 said:
how to tell if you have one?
i see this line in my build.prop
Click to expand...
Click to collapse
I have the same lines in my build.prop, I think it means that iZat is disabled, but I'm not 100% sure, if you check the reddit post at http://www.reddit.com/r/LGG3/comments/2c3k3s/lg_g3_and_geocaching_how_is_the_gps/cjbm9q0 it says where you can find the setting for it.
Ah well hopefully a root will show up soon, although maybe it's inside your KDZ too, could you maybe go to http://csmg.lgmobile.com:9002/csmg/b...sn=*********** and change the stars to your IMEI, and copy the sw_url path here so we could take a look into it?
Click to expand...
Click to collapse
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=352596060206415 there it is, not sure if that is what you need, but that is my IMEI in the link.
deadh0b0 said:
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=************** there it is, not sure if that is what you need, but that is my IMEI in the link.
Click to expand...
Click to collapse
Hmm well that's strange, normally it gives a link to the KDZ there, at least it does for me...
Luckily there's another way to check, I used your IMEI at http://csmg.lgmobile.com:9002/csmg/b2c/client/cs_auth_model_check.jsp?esn=************** and it gives a link to http://dl02.gdms.lge.com:5006/dn/downloader.dev?fileKey=PS47109201/LS990ZV4_04.51101.zip, that files not found but googling the name brings up some uploads from other people, time to start digging, thanks for your help :good:
Edit: Looks like we might have already cracked it
Doing searches inside the system.img in that zip for the string "IZat" I found an apk which wasn't on my phone, namely /system/app/xtra_t_app.apk, decompiling this apk showed it as being "com.qualcomm.location.XT". Seeing nothing else related to iZat that my phone didn't already have I took the plunge and installed it, and when I went to Location -> Mode I was greeted with a nice "com.qualcomm.location.XT has had to close" error. Darn! At least the enhanced location section was there, but it had no text under it, just an off/on button.
Determined, I looked into what was happening using adb logcat and it seemed like it was looking for an xt_native library which my phone was missing. I found that at /system/vendor/lib/libxt_native.so in the Sprint image and copied it to my phone, went back to settings and to my surprise the iZat option showed up!
Enabling it brought up some standard privacy policy b/s, and after saying OK to that it seems like it's enabled! Not sure how to check if its working exactly, but seeing as it looked like just this apk and lib file was missing I think it's working
A download for the apk and .so file is at https://mega.co.nz/#!DoQzgSjA!k8OeUr6W6pfhszd-kddVtzXNd7d1voWQsqN-A0D_0J8
To install it you'll need root (although there might be a way to package the .so inside the apk and skip needing it, this is my first time messing with Android since 2010 or so though so I'm a bit rusty with stuff like that)
First mount your system as r/w, running this works for me:
Code:
mount -o rw,remount -t ext4 /dev/block/platform/msm_sdcc.1/by-name/system /system
Copy the libxt_native.so to your /system/vendor/lib/ folder
Run chmod 644 libxt_native.so to set the permissions properly
Install the apk
Restart, go to the location settings and enjoy
The permissions for the apk are pretty crazy and mention some in-call purchasing things, this isn't my doing though. In case you want to verify it you can download the LS990ZV4_04.51101.zip, extract the tot using LGBinExtractor (might need a small mod to support Sprint tots), open the system.img with Ext2explore and compare the hash of the apk I uploaded with the /app/xtra_t_app.apk inside it.
Major thanks to deadh0b0 for helping us find where it was!
Anyway, enjoy
Edit: also, obligatory disclaimer that I'm not responsible for anything that happens by doing this! This is literally just-found-out-about-5-minutes-ago work, so I haven't exactly tested it long, my (3UK D855) phone seems to be working fine though, so hopefully all should be good!
Edit2: I think there might be some more to this, not getting any XT debug messages in logcat besides the settings changes, hmm..
I don't even know how it works but I have it
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my LGLS990 using Tapatalk
Any way to get it working on other versions than the Sprint G3?
Sent from my LG-D851 using Tapatalk
Out chipsets support it, at least my Snapdragon 801 supports it.
But I don't got the option...
http://www.qualcomm.com/snapdragon/processors/801
Sent from my LG-D852 using Tapatalk
D8855 V20i and iZat
Dear All,
Please note that LG D855 with V20i bumped image does not have by default the xtra_t_app.apk applied. However it has the related .so library. If xtra_t_app.apk is installed, the Enhanced Location Menu appears and it allows to turn it on/off.
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=354153062849400
This is my D855 and i dont have that option and i'm on 5.0 (20h). Can i install xtra_t_app.apk without the libxt_native.so in to my phone? thanks
saigon66 said:
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=354153062849400
This is my D855 and i dont have that option and i'm on 5.0 (20h). Can i install xtra_t_app.apk without the libxt_native.so in to my phone? thanks
Click to expand...
Click to collapse
Check your:- /system/vender/lib/folder for the:- libxt_native.so file, if there go ahead, if not see Post #11......
This screen was taken after i installed the apk file. Did i miss something?
saigon66 said:
This screen was taken after i installed the apk file. Did i miss something?
Click to expand...
Click to collapse
My sister's got same blank menu with on/off slider...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The latest MIUI is 4.11.17
This one is on: 4.11.17. This thread will always be one update behind so always remember to use the OTA updates!
How to Install: (Updated 10/31)
Flash back to the original stock ROM.
Root and install FreeGee for Recovery.
Install CWM recovery from FreeGee.
Download Philz Advanced Recovery
Download MIUI rom.
Download Modem.
Flash Philz Touch Recovery (PTR) and reboot back to Recovery.
Do full ROM wipe in PTR.
Flash MIUI ROM then Modem
Reboot.
Set up phone and update using OTA.
Enjoy.
Latest 4.10.31 Features since the last MIUI update in General thread.
Added NFC support.
Added LG display settings.
Added LG USB settings.
Added quick link to Service Menu.
Added casting support.
Added LG charging LED
General bug fixes.
GPS location fix in US. (Instant)
[Q] Are you a developer? Will you be able to provide support?
No I'm not, and I'll try my best!
Mainly, you'll have to depend on the support from our community much like I will be! And you have to understand that it will be a learning process for both us and we can only depend on one another for any support! So if you run into any problems, feel free to post! And if you have a solution, make sure to try and help another user out! :good:
LTE is working
anonymous007 said:
As of the 4.10.31 and up you can now easily enable LTE and make it stick by going to General Settings > Mobile Networks > Preferred Network > FDD-LTE
Click to expand...
Click to collapse
Download Links:
Weekly MIUI Download 10/31:
https://yadi.sk/d/ywRXsX_CcUQoe
(The reason I am not using the official link is because of the download speeds. It took over night to download it once. And that's not including the ~30 failed downloads. I will still leave a link to the original at the very bottom.) If you would like to add a mirror as well just let me know and I'll add it here!
Philz Touch Recovery:
http://forum.xda-developers.com/showthread.php?t=2552611
Madmack's Modem E980
http://downloads.codefi.re/madmack/GPRO/CM10_1/modem/E980-MODEM-BM9615A-CWM.zip
----------------------------------------------------------------------------------------
Official MIUI page:
http://en.miui.com/download-122.html
Special thanks to:
Literally everyone at this point. So if you exist, thank yourself.
just a question, supports Spanish language? and thanks
javi1609 said:
just a question, supports Spanish language? and thanks
Click to expand...
Click to collapse
It does not currently support Spanish. It only supports Chinese and English at this time. Sorry!
Nice, someone finally mirrored as the Chinese servers are to slow lol, but some corrections though the ROM does has LTE
Go to general settings > additional > service menu > switch the CDMA to USIM phone should force reboot > following this go back to the service menu and change the Network Mode to Global + LTE That's it.
Also there is another version that puts out updates every Friday here Download Link: http://www.miui.com/download-262.html
Original Source: http://bbs.sonyue.com/thread-96332-1-1.html if anyone can also mirror that one I'd appreciate it as I've had no luck getting it to download lol.
anonymous007 said:
Nice, someone finally mirrored as the Chinese servers are to slow lol, but some corrections though the ROM does has LTE
Go to general settings > additional > service menu > switch the CDMA to USIM phone should force reboot > following this go back to the service menu and change the Network Mode to Global + LTE That's it.
Also there is another version that puts out updates every Friday here Download Link: http://www.miui.com/download-262.html
Original Source: http://bbs.sonyue.com/thread-96332-1-1.html if anyone can also mirror that one I'd appreciate it as I've had no luck getting it to download lol.
Click to expand...
Click to collapse
I believe in order to change it to LTE, we would need the Modem to be working. Because the current one tends to freeze MIUI when changing to LTE.
But after some research it looks like you have to flash both the modem and madmacks kernel for it to work. I haven't tested it myself though but I've seen some reports of people doing that back in the General thread. And I'll try and mirror that weekly one and just label this one 'stable' for more options.
Weekly is now up. I've tested it and there should be an update this friday as well via OTA. I'll keep the OP updated a week behind so users can just use the OTA to get to the latest.
This MIUI is pure Daily Driver material. Battery life is great, good performance/features, and GPS location lock is practically stock speed (like ~5 seconds on 3G). They really worked hard on this one :good::good:
Going to test the deep sleep tonight and report back tomorrow.
Update: After flashing the modem, I got a 5% battery drain after 9 hours with Wi-Fi on. So no different from any CM ROM you'll see around here.
Wow, this is one slick getup. The way they've seperated and designed the notication area really pleases me. I'm surprised that design hasn't been ganked by other roms. Mating this with a Cyanogenmod would result in some wicked magic, for sure. CM's awful notication area always maddens me.
This makes me so hype! I'm one of those (seemingly) rare people that really likes miui and have been hoping something with any kind of support would come to the G Pro. Can't wait to flash this tomorrow. Thanks for bringing us this rom.
Question: Do I have to use PTR, or would TWRP work?
RaiderDuck said:
Question: Do I have to use PTR, or would TWRP work?
Click to expand...
Click to collapse
I just checked the official form post and it looks like it's PTR or TWRP.
Tried installing it yesterday and no bueno. It wouldn't recognize the modem, no matter what I did.
RaiderDuck said:
Tried installing it yesterday and no bueno. It wouldn't recognize the modem, no matter what I did.
Click to expand...
Click to collapse
Which model do you have, which modem did you use, and what recovery did you use. Thanks
GreatCaesar said:
Which model do you have, which modem did you use, and what recovery did you use. Thanks
Click to expand...
Click to collapse
I have an E980, I flashed the modem given in the OP, and I used TWRP.
RaiderDuck said:
I have an E980, I flashed the modem given in the OP, and I used TWRP.
Click to expand...
Click to collapse
So you were able to flash the modem and there wasn't any signal? Or did the recovery not recognize it?
GreatCaesar said:
So you were able to flash the modem and there wasn't any signal? Or did the recovery not recognize it?
Click to expand...
Click to collapse
The modem seemed to flash normally, but after I rebooted, it didn't pick up any network. "Mobile networks" was grayed out in Settings. I tried changing the CDMA settings but it FCed every time I did so and the settings remained unchanged.
RaiderDuck said:
The modem seemed to flash normally, but after I rebooted, it didn't pick up any network. "Mobile networks" was grayed out in Settings. I tried changing the CDMA settings but it FCed every time I did so and the settings remained unchanged.
Click to expand...
Click to collapse
Which carrier are you using?
And CDMA settings will FC regardless, it's one of the reasons LTE doesn't work at the moment.
Try going to Settings > Mobile networks > Network carriers and try setting that manually along with the APN.
GreatCaesar said:
Which carrier are you using?
And CDMA settings will FC regardless, it's one of the reasons LTE doesn't work at the moment.
Try going to Settings > Mobile networks > Network carriers and try setting that manually along with the APN.
Click to expand...
Click to collapse
I'm using AT&T. I'm not thrilled with Commotio (which I flashed yesterday after MIUI bombed) , so I'll try to reflash MIUI in a few minutes.
RaiderDuck said:
I'm using AT&T. I'm not thrilled with Commotio (which I flashed yesterday after MIUI bombed) , so I'll try to reflash MIUI in a few minutes.
Click to expand...
Click to collapse
You should try and use PTR just in case. Weird that it happened in the first place.
GreatCaesar said:
You should try and use PTR just in case. Weird that it happened in the first place.
Click to expand...
Click to collapse
Can I flash other ROMs using PTR? And can I flash PTR using TWRP?
RaiderDuck said:
I'm using AT&T. I'm not thrilled with Commotio (which I flashed yesterday after MIUI bombed) , so I'll try to reflash MIUI in a few minutes.
Click to expand...
Click to collapse
I'm back on CM11 but when I was using the MIUI 4.10.27 build I had LTE working, you don't need to flash a modem or anything just install normally in aroma and when you get in to the Service Menu select Mobile Networks then click the option Global+LTE and and hit the back button and the icon should change to 4G. Just ignore the changing the CDMA Subscription to USIM step as it doesn't seem to work or effect the E980 so leave it at NV.
I'm making this thread for those like me, desperate for Pie on our beloved LG V30 (V30+ in this case). Personally I wanted to see if updating to Pie would fix that very annoying GCam issue I've been having (selfie green tint). Spoiler alert: it did not fix anything. Oh well. If you want to try Pie beta on your V30+ for some other reason, here's my guide.
Five things to note before we get started:
1. I wouldn't try this on devices other than H930DS. You've been warned.
2. You cannot go back to previous Oreo firmware if you do this.
3. You must lock your bootloader before you attempt this upgrade (if you unlocked it)
4. Must be on THIS firmware otherwise the operation will not work.
5. In Android Pie Beta for the V30, there are some languages missing in the settings. English is there though.
Now that that's out of the way, let's do this.
Step 1: downloads
Download Pie beta OTA for the H930DS
The file is 1.8 GB.
Download these necessary files (LGUP & drivers) here
Step 2: Preparation
Once you downloaded the zip (thanks to @PilyTam by the way), extract the files to a location of your choice.
Then, install LGMobileDriver_WHQL_Ver_4.2.0.exe, LGUP_Common_DLL_Ver_1_0_28_5.msi , and LGUP_Store_Frame_Ver_1_14_3.msi
The only file that you haven't touched yet is another zip - LGUP V30DLL_PATCHED.zip . Extract the files to where LGUP is installed. By default it will be in C:\Program Files\LG Electronics\LGUP . Replace the files when prompted.
Step 3: Proceeding with the update
Make sure your device has "USB Debugging" enabled in the settings. You can find this option in developer settings.
To enable developer settings:
Go to settings > general > about phone > software info
Now tap "build number" until you see the "you are a developer" message.
Connect your V30 to your PC.
Launch LGUP.
Choose FOTA Upgrade
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
In file path, click on the three dots and find the OTA update - H930DS-V22j-HKG-to-H930DS-V29g-HKG.up
And finally, click Start.
It will appear to be stuck at 4% for some time with the message saying "Flash package" (at least that's what happened to me), but don't panic, just let it do its thing. When the LGUP program says the operation has succeeded, you still have to wait for your V30 to actually apply the update. It will say "FOTA EASY UPDATE" in big blue letters on your screen. And it will take some time to apply the update.
Thanks for reading and good luck everyone. I hope my guide was clear enough. If you need any help I'll do my best to assist you.
Here are some screenshots.
We can't go back to Oreo? This is useless then. And does the sim work?
trouble. said:
We can't go back to Oreo? This is useless then. And does the sim work?
Click to expand...
Click to collapse
Lol useless? Thanks. And yes sim works. Proof here https://imgur.com/a/nAq8cZ5
I didn't have my SIM card inside earlier but now I put it in and it works.
jericho246 said:
Lol useless? Thanks. And yes sim works. Proof here https://imgur.com/a/nAq8cZ5
I didn't have my SIM card inside earlier but now I put it in and it works.
Click to expand...
Click to collapse
If i flash pie beta on my h930, Then will i be able to roll back?
trouble. said:
If i flash pie beta on my h930, Then will i be able to roll back?
Click to expand...
Click to collapse
Don't know, but probably not.
trouble. said:
If i flash pie beta on my h930, Then will i be able to roll back?
Click to expand...
Click to collapse
No!
Sent from my LG-H932 using XDA Labs
Thanks for the guide and other information here. It's very clear and easy to understand
want H932 9.0
trouble. said:
If i flash pie beta on my h930, Then will i be able to roll back?
Click to expand...
Click to collapse
you can follow this to roll back andoid 8 stock, I tried, it work for me androidsage[.]com/2019/06/17/download-and-install-lg-g7-android-9-pie-via-kdz-firmware/
and h933 file for someone need drive.google[.]com/file/d/1ObKD8GxyOkNomKOgrw4FMrkNaj94Trir/view?usp=sharing
Hello, I did the whole process, the blue letters came out, it was restarted and an error came out, I have the h930ds, firmware 22j but the open eu, it was as it was.
Can someone tell me does the beta has any issues and does this neta enable DTS x on v30+ i have indian h930ds was thinking i should install
RM_Wreckers said:
Can someone tell me does the beta has any issues and does this neta enable DTS x on v30+ i have indian h930ds was thinking i should install
Click to expand...
Click to collapse
Dts x not there
RM_Wreckers said:
Can someone tell me does the beta has any issues and does this neta enable DTS x on v30+ i have indian h930ds was thinking i should install
Click to expand...
Click to collapse
You can already have DTS 3D Surround stereo with bootloader unlock and root on Oreo. No need to wait.
Somebody tried this with a Frankenstein V30 yet?
How to dump file android pie h930.
Lgup not work
29i Update
---------- Post added at 08:23 AM ---------- Previous post was at 08:20 AM ----------
bilong9 said:
How to dump file android pie h930.
Lgup not work
Click to expand...
Click to collapse
i can dump and i was able to create stock zip V300 and H933
---------- Post added at 08:24 AM ---------- Previous post was at 08:23 AM ----------
FULL
PjLyTam said:
29i Update
---------- Post added at 08:23 AM ---------- Previous post was at 08:20 AM ----------
i can dump and i was able to create stock zip V300 and H933
---------- Post added at 08:24 AM ---------- Previous post was at 08:23 AM ----------
FULL
Click to expand...
Click to collapse
You can share it for everyone ?
I can't download rom file.
jericho246 said:
3. You must lock your bootloader before you attempt this upgrade (if you unlocked it)
[/hide]
Click to expand...
Click to collapse
it is really necessary?
Aptahar said:
it is really necessary?
Click to expand...
Click to collapse
Yes
Deprecated - please see my other guide for a better method: Enabling VoLTE/VoWiFi v2
Preface
Thanks to some help from this amazing community I have found the steps required to enable VoLTE and/or VoWiFi. For me both work, but others have reported differently - but the most likely outcome is that you will only have VoLTE working; you may have to do some experimentation to get both.
Prerequsities
* You must have root. There are several threads on how to do that, so look those up if you need help.
Downloads
* QPST
* Qualcomm USB drivers
* AsusVoLTE app
* MBNs (optional)
Step 1
First of all you will need to install both QPST and the Qualcomm USB drivers from the links above. It's important that you install exactly those ones, or it may not work. Once you've done that, launch PDC.exe in the bin folder of the QPST install (usually C:\Program Files\Qualcomm\QPST\bin\PDC.exe).
Step 2
Download and install the AsusVoLTE app from above and launch it. The app is very simple, and only has two buttons - press Enable PDC and you should hear/see a new device installing. Once that's done, you should see a new device under the Device dropdown in Advanced PDC Tool called something like Qualcomm ... 9091. Select it and you should see some things pop up in the box below - starting with HW_DEFAULT and SW_DEFAULT and probably also ROW_v1. If you only see those you will need to load external ones from the MBNs zip above. Simply press the Load button and select the mbn you want. Keep in mind that you will only be able to load MBNs from the zip above, ones from another device will *not* work.
Step 3
Now comes the tricky part; we have to find a profile that actually works on your carrier. For me the VivoVoWiFi_v5 profile enables both VoLTE and VoWiFi, but this may or may not work for you. Most of them at the very least enabled VoLTE for me.
To actually activate a profile you have to right-click on it, select SetSelectedConfig and Sub0, then repeat it but press Sub1 instead. After you've done that Sub0 and Sub1 for that profile should have changed to Pending, so simply highlight it again and press the Activate button at the bottom of the screen. This should change Sub0 and Sub1 to say Active and it should also be moved to the top of the list just below HW_DEFAULT and SW_DEFAULT.
To check if it works you have to either reboot, or you can do the far simpler thing and press Reset Connection in the AsusVoLTE app. This will disable the mobile connection for a few seconds but once it's back on you should hopefully see either VoLTE or VoWiFi in the status bar. If not, you will have to try another profile! It can be quite time consuming finding one that works for you, but if you get VoLTE on at least one of them there's a chance one of them will also enable VoWiFi.
Recommended profiles
Below I will compile a list of carriers and the profile that works best for them.
Carrier - Profile - Function
AT&T - VivoVoWiFi_v5 - VoLTE
H3G SE - VivoVoWiFi_v5 - VoLTE & VoWiFi
Hot Mobile Israel - NLVFVoWiFi_v1 - VoLTE & VoWiFi
Orange Romania - VivoVoWiFi_v5 - VoLTE
Source code:
AsusVoLTE - Github
Let me know if this works for you, or if you have any questions.
Regards
Waiting for someone in the US to confirm this works before pulling the trigger on this phone
Hi I'm from Mumbai, India...for me VoLTE working perfectly. I just want to enable VoWIFI... But my device is not rooted yet.
Let's wait for sometime to see if VoWIFI is working without rooting or not as presently not even a single custom ROM available for ROG 2 so i don't have any reasons to root device.
Still a huge thanks for your all efforts and help what you did for our beast ROG 2...
Sent from my ASUS_I001DE using Tapatalk
sircrisp said:
Waiting for someone in the US to confirm this works before pulling the trigger on this phone
Click to expand...
Click to collapse
None of the signed MBNs included with the phone work for T-Mobile, unfortunately. We can't load unsigned ones from other devices.
I believe this has worked on AT&T!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
xbamaris1` said:
I believe this has worked on AT&T!
Click to expand...
Click to collapse
Which one did you use? It would help others if you can let them know.
dennis96411 said:
Which one did you use? It would help others if you can let them know.
Click to expand...
Click to collapse
I used the same one he mentioned. The VivoVoWiFi_v5 profile. Thats the first one I tried and it worked right away. Tested a call to another cell I have that I know has VoLTE and it sounds so much better on ROG Phone 2 now, so I can confirm this is working on AT&T 100%
EDIT: To also add, this is the ROG Phone 2 128 GB Tencent Edition as well.
dennis96411 said:
Which one did you use? It would help others if you can let them know.
Click to expand...
Click to collapse
Indeed. I will aim to compile a list in the first post with the recommended profile for each carrier - so it would help if you all could let me know what carrier you are on and what profile you're using!
Someone else with T-Mobile US should try it just to confirm that it doesn't work.
---------- Post added at 02:00 PM ---------- Previous post was at 01:58 PM ----------
xbamaris1` said:
I used the same one he mentioned. The VivoVoWiFi_v5 profile. Thats the first one I tried and it worked right away. Tested a call to another cell I have that I know has VoLTE and it sounds so much better on ROG Phone 2 now, so I can confirm this is working on AT&T 100%
Click to expand...
Click to collapse
It might be worthwhile to try other profiles to see if you can get VoWiFi as well.
dennis96411 said:
Someone else with T-Mobile US should try it just to confirm that it doesn't work.
---------- Post added at 02:00 PM ---------- Previous post was at 01:58 PM ----------
It might be worthwhile to try other profiles to see if you can get VoWiFi as well.
Click to expand...
Click to collapse
Ill try a few other profiles to see if I can get VoWIFI. Im just thrilled that VoLTE works! HUGE THANKS!
Any ones in particular I should try first?
HomerSp said:
Indeed. I will aim to compile a list in the first post with the recommended profile for each carrier - so it would help if you all could let me know what carrier you are on and what profile you're using!
Click to expand...
Click to collapse
I believe your findings would work with the ZenFone 6. You should head over to their forum and let them have a go. It might even work with the original ROG Phone.
First of all, @HomerSp please create a donation option, I would appreciate the chance to buy you a beer for all the hard work you've done.
Carrier - Hot Mobile Israel, profile - KDDIVOWIFI_V4, function - volte and vowifi, UT doesn't work.
What is UT? Now I can't go into the carrier settings inside the dialer it gives me an error message so I can't cancel call waiting and hide my number for outgoing calls, no big deal for me I will try more profiles tomorrow.
dennis96411 said:
Someone else with T-Mobile US should try it just to confirm that it doesn't work.
---------- Post added at 02:00 PM ---------- Previous post was at 01:58 PM ----------
It might be worthwhile to try other profiles to see if you can get VoWiFi as well.
Click to expand...
Click to collapse
Tried a few other profiles, mostly ones with "VoWIFI" in their name. A lot of these worked for AT&T for VOLTE. Only a few gave me the Video Calling in IMS. The closet I could get was "testSIMViWifi_v4" profile gave me everything BUT VoWifi.
Made sure VoWIFI was enabled in the settings as well. Any ideas?
xbamaris1` said:
Tried a few other profiles, mostly ones with "VoWIFI" in their name. A lot of these worked for AT&T for VOLTE. Only a few gave me the Video Calling in IMS. The closet I could get was "testSIMViWifi_v4" profile gave me everything BUT VoWifi.
Made sure VoWIFI was enabled in the settings as well. Any ideas?
Click to expand...
Click to collapse
I can only guess that none of the profiles have VoWiFi configs for AT&T. It's better than nothing I suppose.
I have tmo and project FI. Will test and report
Hi all tried to do this but stuck in step 2 when i select enable PDC on the App nothing happens i have PDC.exe open and have installed the required files but nothing shows up under devices
Dumb Question: Any way to root this thing without downloading someone's hacked boot image?
TawkinTrash said:
Dumb Question: Any way to root this thing without downloading someone's hacked boot image?
Click to expand...
Click to collapse
Flash the Magisk zip file after you flash a full firmware zip.
I'm not sure if my next question belongs in this thread. But since my ROG Phone 2 is currently rooted with an unlocked bootloader. Is there a way to retain this without having to flash the RAW FW and relock the bootloader?
Is there a reason I cant re-flash the stock boot.img and then use fastboot to relock the bootloader?
As a test, I reflashed the latest RAW firmware and relocked the bootloader. And as I expected VOLTE was not enabled again. However, after re-rooting and using PDC, I saw that the profile I used to enable VOLTE was still Active. Would all I need to do is reflash the RAW FW then use ADB to enable the settings in the menu?
any way to open serial without root?