Hello guys me again with new kernel
Presenting New Advanced RockZ1L Kernel
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note: this is only for Z1 Compact
Features of the Kernel
Check with Change log each kernel there are lots of new work and features
Updated the ramdisk to .242
Updated Kernel sources to .242
updated Twrp Recovery ( new build)
Updated Philz recovery ( new built )
GCC 4.9.3 Linaro toolchain with Cortex-A15 buit
Sound control
Added Atheros wifi
Finally a fully working Wifi ( fixed ) not by stock modules
Fixed Memory leaks and battery optimized
Support exFAT sdcard
added and enabled Intelli-KSM ( patch from Doomlord and lot more )
Two-way stereo call recording
Zram Driver support
Force Fast charging support
LZMA compression
New RockZ1k Logo
Support sound control driver
init.d scripts supported
IO schedulers ( Which are required and works good)
CPU Governors ( Which are required and works good)
CPU VDD control
Thermel temperturing control
Added Kcal color control
RGB Multipliers (Polynomial Color Correction)
Display Color Inversion (Inverse Gamma Correction) [patch by savoca]
Comes with an app to control color
Added HBM ( High Brightnesss mode ) [HBM is able to be simulated by applying higher current drain to back light LED]
And many more not remebered
For more just go with my github
How to Install Click here
Download & credits Click here
XDA:DevDB Information
[5.0-5.1][Kernel Z1C][.368 source][V 4.0] RockZ1L Kernel [04/10/2015], Kernel for the Sony Xperia Z1 Compact
Contributors
venkat kamesh
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: V_4.0
Stable Release Date: 2015-10-04
Created 2015-05-06
Last Updated 2015-10-04
Downloads & credits
Download link for latest kernel Click here 04/10/2015
Old lolly kernel
RockZ1L Kernel 13/08/2015 Click here
RockZ1L Kernel 29/06/2015 Click here
RockZ1L Kernel 31/05/2015 Click here
RockZ1L Kernel 21/05/2015 Click here
RockZ1L Kernel 14/05/2015 Click here
RockZ1L Kernel 06/05/2015 Click here
Old Downloads Dont try these for lollipop these are only for kitkat (just for reference)
RockZ1k Kernel 27/03/2015 Click here
RockZ1k Kernel 26/03/2015 Click here
RockZ1k Kernel 25/03/2015 Click here
RockZ1k Kernel 22/03/2015 New Click here
RockZ1k Kernel 08/03/2015 kernel Click here
Click to expand...
Click to collapse
Credits
@faux123
@DooMLoRD
@[NUT]
@MohammadAG
@hlavicka82
and other devs may be i missed thanks to them
sony For Sources
Thanks. Will give this a shot now
Hi,
Got it working
It just bootloops for me. Installed on the Z1C with your latest ROM.
I can install this kernel with stock Sony rom unlocked bootloader?
What's the difference between RockZ1L Kernel and RockZ1l_v1.2 Deodex/most advanced?
RockZ1L kernel is a kernel -_- and RockZ1L 1.2 is a rom -.-
Wysłane z mojej Z1 compact przy użyciu Tapatalk
tested on z1c, pretty fast and stable
how is the battery life ? It's better than stock ?
crimson12 said:
It just bootloops for me. Installed on the Z1C with your latest ROM.
Click to expand...
Click to collapse
I got the same result!
All you need to Un install stock recoveries
If not it bootloops
If you flash the zip it does all it need mate
So every thing works
deleted
D5503 UB Dstriker ROM KK.157
venkat kamesh said:
All you need to Un install stock recoveries
If not it bootloops
If you flash the zip it does all it need mate
So every thing works
Click to expand...
Click to collapse
How i un install the stock recoveries? Because I follow your instructions wipe everything flash the zip and my phone don't even turn on it only vibrate and turn the red led on. Sorry for the bad English i hope that you can understand me
leodelpreda said:
How i un install the stock recoveries? Because I follow your instructions wipe everything flash the zip and my phone don't even turn on it only vibrate and turn the red led on. Sorry for the bad English i hope that you can understand me
Click to expand...
Click to collapse
Yes I took time for first boot mate. It works
The zip itself clear the recovery installed data
Great kernel, KCAL works perfectly. But for anyone else whose CPU isn't going into Deep Sleep, make sure double-tap to wake is disabled in the "Pimp My Z1" app. If that doesn't work, I disabled it in NamelessROM's "Device Control", which worked for me.
F2FS? Any chance? Since you are currently working on this kernel.
RockZ1L kernel update & changelog
Verbato said:
F2FS? Any chance? Since you are currently working on this kernel.
Click to expand...
Click to collapse
hm i will check with it in next update
Kernel update
Implemented Kexec z1/z1c
2.4Ghz Oc
Implement and enable Quickwakeup driver
Use min pwr level as default to reduce battey consumption
make sync on suspend optional-Power
sched-Disable fair gentle sleepers
random.c-Increase entropy_avail wakeup thresholds
Updated Recoveries
Disabled Ric from Ramdisk
add support to LZ4-compression
optimizations for SSD-only Machines
Fix and Updated intelli_plug
Updated mdss_mdp_ kcal.c
The Aroma contains
multi kernel with no DT2W
normal kernel no multi and no DT2W ( test version, i know it wont. but trial is not a bad thing )
normal kernel with DT2W and no multi
Download link Click here
venkat kamesh said:
hm i will check with it in next update
Click to expand...
Click to collapse
Yeah, I've been keeping an eye on your commits. You've been really busy the last few days! Woh!
The kernel works really well for me (I built it using latest linaro A15). So thank you for all that work!
Adding F2FS would make your perfect kernel even more brilliant though!
can I use it with cm12. 1 or only with stock rom?
Thanks
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am NOT resposible for any damage done to your device, your neighbor, or any other things you like/hate.
Introduction:
About:
This Kernel is a port from the Z2/Z3/Z3C M5 Kernel based on the official CM12 kernel. It should work with any Rom using the stock CM kernel too (Like Carbon and Liquid). I'm mainly using PAC 5.1, and it's working sweet so far!
Installation Instruction:
THIS DOES ONLY WORK ON UNLOCKED BOOTLOADER!
When you're on CM/a CM based Rom:
Flash the zip file in recovery
When coming from Stock:
Flash the boot.img included in the zip file using fastboot. Flash a CM based Rom then and flash the Kernel zip file again as the Rom overrides the Kernel.
Download:
M5 Kernel (Release Versions)
https://dl.myself5.de
M5 Kernel (Test Versions)
https://testing.myself5.de
Thanks/Credits:
Myself5 for making this kernel in the first place!
DooMLoRD (and therefore all guys he thanked listed below) - for a lot of Commits
FreeXperia Team (especially Jerpelea) - for too many things!
Kali- - to help get the correct dtbTool parameters for a bootable kernel
Faux123 - for lots of patches, you rock dude!
koush & all CyanogenMod maintainers - for too many things!
Dees_Troy & TeamWin - for their excellent work on TWRP Touch Recovery
Phil3759 - for his excellent work on PhilZ Touch Recovery
myfluxi - for a lot of great patches
flar2 - for a lot of great patches
dbolivar- toolchain fixes
FranciscoFranco - for Cortex-A15 optimizations, bunch of other things!
CarbonRom Team - for too many things!
vishal-android-freak - for too many things!
phaseburn - for being a good friend and helping me with almost everything !
sreinst1 - for too many things!
infected_ - for help with SM!
pec0ra - for fast_hotplug
AndroPlus - for too many things!
sparksco - for the SaberMod Toolchain
YoshiShaPow and Frap129 - for SaberNaro Toolchain
Team AOSPAL - for the Kernel Optimizations
If I forgot you, please tell me.
To donate to Myself5:
XDA:DevDB Information
M5 Kernel, Kernel for the Sony Xperia Z1 Compact
Contributors
oshmoun, Myself5
Kernel Special Features:
Version Information
Status: Alpha
Created 2015-07-10
Last Updated 2016-07-01
Changelog
Latest Version: V11.2
Changelog:
Version 1:
Initial Z2 Release
Introduce Optimized Buildflags in order to build with SaberMod 4.9
Add Intelliplug
Add Fastcharge
Add new CPU Govs: wheatley, Smartassv2 LionHeart, Lagfree, Intelliactive
Add new I/O Sheduler BFQ, fiops, SIO
Add Faux123 Sound Control
GPU OC to 657MHz, Idle on 27MHz and add 100MHz Step
Version 1.2
Fix D2W
Add fast_hotplug CPU Hoplug
Version 2:
Implement kexec-hardboot -> this allows the usage of MultiROM
CPU OC over 2.9 GHz -> We now can OC up to 3.03GHz
Version 3:
Add CPU Govs Intellidemand, smartassH3 and adaptive
Add IO Sheds VR, ZEN, SIO-Plus and tripndroid
Add Custom Logo
Fix simple ondemand GPU Gov and add conservative
Version 4:
Add 268MHz CPU Step -> CPU can now idle on lower CPU freq and save battery
Add Alucard Hotplug and CPU Gov
Add ElementalX Gov
Revert OC Ability to 3GHz -> 3GHz was just not stable
Add KCAL support
Add F2FS Support
Initial Z3 Bringup
Version 5:
Add Bricked Hotplug
Add new CPU Govs Alucard, HYPER, OndemandPlus, Nightmare, Darkness, PegasusQ, Smartmax
Remove F2FS Support again -> Seems not to be very stable
Version 5.1:
Revert Custom Bootsplash -> together with the new Display Drivers it made the device not to boot anymore
Version 6:
Fix for Z3* Touch in MultiROM -> updated Clearpad Touch Driver
Initial Z3 Compact bringup
Version 7:
Add slim and zzmoove CPU Gov
Initial Z1 Compact bringup by @oshmoun
Enable F2FS Again
Update Alucard, Darkness and Nightmare Govs
Update BFQ I/O Shed
Update Alucard Hotplug
Rebase IntelliPlug to faux123's latest Version
Version 8:
Fixed F2FS, thanks to @Hazou
Finally implement Intelli_Termal V2, thanks to @someone755 and @oshmoun
Updated alcurd, nightmare, darkness
Version 9:
Initial Z1 bringup by @oshmoun and @Langes
Kernel Zip is now based off AnyKernel2 by @osm0sis, this allows the installation on every Rom using CM Kernel, even if it has a different Ramdisk than CM, like Mokee and Slim
Version 10:
Initial Bringup for Sony Xperia Tab Z2 (LTE and Wifi) thanks to @rcstar6696
Fix Kernel install issues with AnyKernel2
Display Kernel Version in Settings (Change Localversion from M5-Kernel to M5-Kernel-*VERSION*
Add Adreno_idler
Update zzmoove to Version 1 Beta 8
Fix a bunch of Display issues (like Black lines) on Z1C
Add mac80211 injection patch and HID patch for keyboard support
Version 10.2:
Fix Soft Reboots on rhine devices
Add Oneshot Sync
Tweak kgsl
Fix loading of LZMA Compressed Recoverys
Version 11:
Probably the last 3.4 M5 Kernel release, we will start working on M5 Kernel based on the Sony 3.10 AOSP Kernel soon.
Merge CM Upstream (Includes merge of Sony 23.4.A.1.200/23.4.A.4.6)
Fix static noise on high-end headphones
Various zRAM fixes and improvements
Merge of Linux Kernel upstream to get the kernel base to 3.4.111 (latest 3.4 Kernel available)
@tomascus rules.
Version 11.1:
Fix sound again by reverting the previous sound fixes
Version 11.2:
Recompile Kernel because thanks to the Server failure we lost some of the V11.1 builds.
All Versions since V4:
Support for LZMA compressed Recoveries like MultiROM TWRP (http://review.cyanogenmod.org/#/c/89057/)
[Only for V*-Permissive] SELinux Permissive for use with Xposed Framework (http://review.cyanogenmod.org/#/c/78551/)
All Version included the newest CM Upstream Changes from the Day they got compiled. Version which are not mentioned explicitly did only include a CM Upstream update.
For a detailed Changelog, check the Github Commit history:
Lollipop
https://github.com/Myself5/android_kernel_sony_msm8974/commits
fixes
is the fix against black lines included ?
and maybe a fix for crappy notification sounds on cm12.1 with .ogg files ?
best regards
TECCC said:
is the fix against black lines included ?
and maybe a fix for crappy notification sounds on cm12.1 with .ogg files ?
best regards
Click to expand...
Click to collapse
Black line fix is included, notification sounds are not related to the kernel.
Sent from my Xperia Z3 using Tapatalk
Myself5 said:
Black line fix is included, notification sounds are not related to the kernel.
Sent from my Xperia Z3 using Tapatalk
Click to expand...
Click to collapse
thank you very much
Update:
Download links added, you'll find the kernel under amami folder.
Have fun!
a QUICK GUIDE for available governors in M5 kernel, based on this excellent resource.
Overclock is not working!
mohamed mahmaz said:
Overclock is not working!
Click to expand...
Click to collapse
Oh yes that is known, and it will come in later versions
Minor, major version? Is this 3.4 based or 3.10 based?
cm based 3.4
Sent from my Xperia Z1 Compact using Tapatalk
munjeni said:
Minor, major version? Is this 3.4 based or 3.10 based?
Click to expand...
Click to collapse
It's still 3.4 based, but as soon as Camera is working on 3.10 Kernel I'm going to work on a 3.10 based M5 Kernel as I'll use it for Carbon and OmniROM builds for my devices too.
Sent from my Xperia Z3 using Tapatalk
Myself5 said:
It's still 3.4 based, but as soon as Camera is working on 3.10 Kernel I'm going to work on a 3.10 based M5 Kernel as I'll use it for Carbon and OmniROM builds for my devices too.
Sent from my Xperia Z3 using Tapatalk
Click to expand...
Click to collapse
You need to ask jerpelea to give you link to the commit on git when everything worked! Last time when I used his kernel everything is worked, only which was lag was some videos but camera if I am not wrong worked well!
Does the kernel work with slim based roms? I have tried V7 and V7.9 with Tesla and unfortunately both are bootlooping.
Kernel works great. If I want to try F2FS support for the amami it doesn't work.
From my experience it is missing the f2fs mount strings in the fstab.qcom file in the ramdisk. Any chance u can add the mounting lines in the fstab file so I don't have to manually apply them?
Hazou said:
Kernel works great. If I want to try F2FS support for the amami it doesn't work.
From my experience it is missing the f2fs mount strings in the fstab.qcom file in the ramdisk. Any chance u can add the mounting lines in the fstab file so I don't have to manually apply them?
Click to expand...
Click to collapse
If you're sure that this is the problem, gladly
Just to be safe though, would you send me how fstab.qcom should look like? That way I won't make any unfortunate mistakes
Wow finally a kernel for CM12.
Thanks a lot!
EAP wifi fix maybe? Or is that not kernel related?
kristof93 said:
EAP wifi fix maybe? Or is that not kernel related?
Click to expand...
Click to collapse
no it is most probably kernel related (not sure though)
However, no fix has been found as of yet, at least I haven't stumbled upon one
Bootloop with the Validus ROM
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am NOT resposible for any damage done to your device, your neighbor, or any other things you like/hate.
Introduction:
About:
This Kernel is a port from the Z2/Z3/Z3C M5 Kernel based on the official CM12 kernel. It should work with any Rom using the stock CM kernel too (Like Carbon and Liquid).
Installation Instruction:
THIS DOES ONLY WORK ON UNLOCKED BOOTLOADER!
When you're on CM/a CM based Rom:
Flash the zip file in recovery (not CM recovery)
When coming from Stock:
Flash the boot.img included in the zip file using fastboot. Flash a CM based Rom then and flash the Kernel zip file again as the Rom overrides the Kernel.
Download:
M5 Kernel (Release Versions)
https://dl.myself5.de
M5 Kernel (Test Versions)
https://testing.myself5.de
Thanks/Credits:
Myself5 for making this kernel in the first place!
DooMLoRD (and therefore all guys he thanked listed below) - for a lot of Commits
FreeXperia Team (especially Jerpelea) - for too many things!
Kali- - to help get the correct dtbTool parameters for a bootable kernel
Faux123 - for lots of patches, you rock dude!
koush & all CyanogenMod maintainers - for too many things!
Dees_Troy & TeamWin - for their excellent work on TWRP Touch Recovery
Phil3759 - for his excellent work on PhilZ Touch Recovery
myfluxi - for a lot of great patches
flar2 - for a lot of great patches
dbolivar- toolchain fixes
FranciscoFranco - for Cortex-A15 optimizations, bunch of other things!
CarbonRom Team - for too many things!
vishal-android-freak - for too many things!
phaseburn - for being a good friend and helping me with almost everything !
sreinst1 - for too many things!
infected_ - for help with SM!
pec0ra - for fast_hotplug
AndroPlus - for too many things!
sparksco - for the SaberMod Toolchain
YoshiShaPow and Frap129 - for SaberNaro Toolchain
Team AOSPAL - for the Kernel Optimizations
If I forgot you, please tell me.
To donate to Myself5:
XDA:DevDB Information
M5 Kernel, Kernel for the Sony Xperia Z1
Contributors
oshmoun, Myself5, tomascus
Source Code: https://github.com/Myself5/android_kernel_sony_msm8974
Kernel Special Features:
Version Information
Status: Testing
Created 2015-07-24
Last Updated 2016-07-01
Changelog
Latest Version: V11.2
Changelog:
Version 1:
Initial Z2 Release
Introduce Optimized Buildflags in order to build with SaberMod 4.9
Add Intelliplug
Add Fastcharge
Add new CPU Govs: wheatley, Smartassv2 LionHeart, Lagfree, Intelliactive
Add new I/O Sheduler BFQ, fiops, SIO
Add Faux123 Sound Control
GPU OC to 657MHz, Idle on 27MHz and add 100MHz Step
Version 1.2
Fix D2W
Add fast_hotplug CPU Hoplug
Version 2:
Implement kexec-hardboot -> this allows the usage of MultiROM
CPU OC over 2.9 GHz -> We now can OC up to 3.03GHz
Version 3:
Add CPU Govs Intellidemand, smartassH3 and adaptive
Add IO Sheds VR, ZEN, SIO-Plus and tripndroid
Add Custom Logo
Fix simple ondemand GPU Gov and add conservative
Version 4:
Add 268MHz CPU Step -> CPU can now idle on lower CPU freq and save battery
Add Alucard Hotplug and CPU Gov
Add ElementalX Gov
Revert OC Ability to 3GHz -> 3GHz was just not stable
Add KCAL support
Add F2FS Support
Initial Z3 Bringup
Version 5:
Add Bricked Hotplug
Add new CPU Govs Alucard, HYPER, OndemandPlus, Nightmare, Darkness, PegasusQ, Smartmax
Remove F2FS Support again -> Seems not to be very stable
Version 5.1:
Revert Custom Bootsplash -> together with the new Display Drivers it made the device not to boot anymore
Version 6:
Fix for Z3* Touch in MultiROM -> updated Clearpad Touch Driver
Initial Z3 Compact bringup
Version 7:
Add slim and zzmoove CPU Gov
Initial Z1 Compact bringup by @oshmoun
Enable F2FS Again
Update Alucard, Darkness and Nightmare Govs
Update BFQ I/O Shed
Update Alucard Hotplug
Rebase IntelliPlug to faux123's latest Version
Version 8:
Fixed F2FS, thanks to @Hazou
Finally implement Intelli_Termal V2, thanks to @someone755 and @oshmoun
Updated alcurd, nightmare, darkness
Version 9:
Initial Z1 bringup by @oshmoun and @Langes
Kernel Zip is now based off AnyKernel2 by @osm0sis, this allows the installation on every Rom using CM Kernel, even if it has a different Ramdisk than CM, like Mokee and Slim
Version 10:
Initial Bringup for Sony Xperia Tab Z2 (LTE and Wifi) thanks to @rcstar6696
Fix Kernel install issues with AnyKernel2
Display Kernel Version in Settings (Change Localversion from M5-Kernel to M5-Kernel-*VERSION*
Add Adreno_idler
Update zzmoove to Version 1 Beta 8
Fix a bunch of Display issues (like Black lines) on Z1C
Add mac80211 injection patch and HID patch for keyboard support
Version 10.2:
Fix Soft Reboots on rhine devices
Add Oneshot Sync
Tweak kgsl
Fix loading of LZMA Compressed Recoverys
Version 11:
Probably the last 3.4 M5 Kernel release, we will start working on M5 Kernel based on the Sony 3.10 AOSP Kernel soon.
Merge CM Upstream (Includes merge of Sony 23.4.A.1.200/23.4.A.4.6)
Fix static noise on high-end headphones
Various zRAM fixes and improvements
Merge of Linux Kernel upstream to get the kernel base to 3.4.111 (latest 3.4 Kernel available)
@tomascus rules.
Version 11.1:
Fix sound again by reverting the previous sound fixes
Version 11.2:
Recompile Kernel because thanks to the Server failure we lost some of the V11.1 builds.
All Versions since V4:
Support for LZMA compressed Recoveries like MultiROM TWRP (http://review.cyanogenmod.org/#/c/89057/)
[Only for V*-Permissive] SELinux Permissive for use with Xposed Framework (http://review.cyanogenmod.org/#/c/78551/)
All Version included the newest CM Upstream Changes from the Day they got compiled. Version which are not mentioned explicitly did only include a CM Upstream update.
For a detailed Changelog, check the Github Commit history:
Lollipop
https://github.com/Myself5/android_kernel_sony_msm8974/commits
removed
Flashing time!
I will try. my friend.
Ich werde ihn testen. Mein Freund.
This kernel V9 is not working on MOKEE ROM it shows only the Sony logo and then reboots
It is the latest version of MOKEE
Thanks for your work
Sent from my Xperia Z1 using XDA Premium HD app
Tested, works flawlessy on CM 12.1 Honami
Sent by XDA Fax
yoyoyed said:
This kernel V9 is not working on MOKEE ROM it shows only the Sony logo and then reboots
It is the latest version of MOKEE
Thanks for your work
Sent from my Xperia Z1 using XDA Premium HD app
Click to expand...
Click to collapse
Kernel works fine. Any booting problems happen only if your rom uses a non traditional ramdisk. Anyway, generic ramdisks should never be used. Short of recompiling the kernel, the procedure is to unpack m5 and replace it's ramdisk.cpio with that from your rom.
Please don't ask how to do it, as this well documented om XDA. Hint: use archi kitchen...
optimumpro said:
Kernel works fine. Any booting problems happen only if your rom uses a non traditional ramdisk. Anyway, generic ramdisks should never be used. Short of recompiling the kernel, the procedure is to unpack m5 and replace it's ramdisk.cpio with that from your rom.
Please don't ask how to do it, as this well documented om XDA. Hint: use archi kitchen...
Click to expand...
Click to collapse
Not wanting to complain, but since V9 I use AnyKernel2, it does NOT contain a generic ramdisk because of exactly that reason. AnyKernel2 is designed to unpack the current boot.img, replace the zImage and dt.img, and apply 2 patches to the ramdisk (for lzma compressed recoverys and F2FS) and then repack the boot.img followed by flashing it. Not certainly sure why this does not work on Mokee Rom for you, we tested it especially on Mokee (as mokee has differently named libraries) and it worked fine.
Sent from my Xperia Z3 using Tapatalk
Myself5 said:
Not wanting to complain, but since V9 I use AnyKernel2, it does NOT contain a generic ramdisk because of exactly that reason. AnyKernel2 is designed to unpack the current boot.img, replace the zImage and dt.img, and apply 2 patches to the ramdisk (for lzma compressed recoverys and F2FS) and then repack the boot.img followed by flashing it. Not certainly sure why this does not work on Mokee Rom for you, we tested it especially on Mokee (as mokee has differently named libraries) and it worked fine.
Sent from my Xperia Z3 using Tapatalk
Click to expand...
Click to collapse
That's good to know, but I was just replying to someone who had problems. I have none of those, as I build kernels in a specific rom environment. So, no need for packing/repacking.
By the way: Great job...
Myself5 said:
Not wanting to complain, but since V9 I use AnyKernel2, it does NOT contain a generic ramdisk because of exactly that reason. AnyKernel2 is designed to unpack the current boot.img, replace the zImage and dt.img, and apply 2 patches to the ramdisk (for lzma compressed recoverys and F2FS) and then repack the boot.img followed by flashing it. Not certainly sure why this does not work on Mokee Rom for you, we tested it especially on Mokee (as mokee has differently named libraries) and it worked fine.
Sent from my Xperia Z3 using Tapatalk
Click to expand...
Click to collapse
Thanks
I think the problem is the cyanogenmod recovery. I flash it wich that recovery and get stuck and reboot all the time.
Now i flashed it wich Philz recovery and it is working.
Thank you
I flashed it by TWRP
Sent by XDA Fax
Thx , i've been waiting for this too long ..
btw is D2W working ?
iiD4x said:
Thx , i've been waiting for this too long ..
btw is D2W working ?
Click to expand...
Click to collapse
Doesn't work for me, can't activate it so it's probably not implemented yet
Sent from my Xperia Z1 running Tesla ROM
noahvt said:
Doesn't work for me, can't activate it so it's probably not implemented yet
Sent from my Xperia Z1 running Tesla ROM
Click to expand...
Click to collapse
hmm , i just found it on the changelog so i asked about it ..
wondering if its working on Z2/Z3 using the same kernel ..
noahvt said:
Doesn't work for me, can't activate it so it's probably not implemented yet
Sent from my Xperia Z1 running Tesla ROM
Click to expand...
Click to collapse
Same here, couldn't find an option to enable it... But everything else works damn fine love the hyper governor...
What apps do you guys use to make the changes. Just for interest sake. I use faux
screen freeze
Still happens screen freeze? For me only not cm12 is ok becouse tuchscreen unresponsiv sometimes.
LSD DREAMER said:
What apps do you guys use to make the changes. Just for interest sake. I use faux
Click to expand...
Click to collapse
Kernel Adiutor is the best in my opinion :laugh:
Better of this? http://forum.xda-developers.com/xpe...nel-cm12-1-based-modified-little-bit-t3110111
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My custom Kernel for Oxygen roms
If you are looking for my CyanogenMod Kernel here you go: LINK
Download: DOWNLOAD
Use integrated KernelAdiutor to configure this kernel
Features right now:
Integrated modified KernelAdiutor
added governors: ZZMoove, ElementalX, Impulse, Darkness, Barry_Allen, Smartmax, Bioshock, Blu-Active, Intelliactive, Hyper, Lionheart, Pegasusq
Overclocked Little and Big cores
shutting down big cores on low battery deactivated (can be configured in KernelAdiutor)
added KCAL (so you can configure your screen)
FauxSound (tuning loudspeaker currently not working)
add TCP Algorithms and set westwood as default
add FIOPS IO scheduler
added charge control
Core Control
added Boeffla Config Helper
added Sweep2Wake
IntelliPlug and Thunderplug Hotplug driver
Optimized Thunderplug as default
Optimized Thermal Control
Charge Control
Fsync on/off
Kexec Hardboot patch for Multirom
Frandom
Adreno Idler
Backlight Dimmer
State and LCD Notfier
Quick Wakup
various kernel flag optimizations
Credits:
Grarak
Lord Boeffla
Mahdi
Ak
faux123
CyanogenMod
XDA:DevDB Information
Benschhold Custom Kernel for Oxygen, Kernel for the OnePlus 2
Contributors
benschhold
Source Code: https://github.com/benschhold/android_kernel_oneplus_msm8994_custom/tree/oxy
Kernel Special Features:
Version Information
Status: Beta
Created 2016-04-06
Last Updated 2016-06-08
reserved
Crazy bensch, thank you very much
Will test it, when im home
Which Oxy rom??? OOS 2 or OOS 3??
benschhold said:
reserved
Click to expand...
Click to collapse
Hi man and thanks for your work.
Just a question: This is for oos3 right?
Thanks,
TS
Tierri said:
Hi man and thanks for your work.
Just a question: This is for oos3 right?
Thanks,
TS
Click to expand...
Click to collapse
Oxygen Android 5.1
Will you make it for OOS 3 when they release kernel sources?
NisseCool said:
Will you make it for OOS 3 when they release kernel sources?
Click to expand...
Click to collapse
yes should be no proplem
Awesome , Keep going :good::highfive:
Please for OOS 3.0
Kexec hardboot patch..
Does the kexec hardboot patch work?? It didn't work for me on CM 13 builds of kernel..
Lelikus said:
Please for OOS 3.0
Click to expand...
Click to collapse
I think he nees the source of OOS 3.0 to build his kenel.. OP don't provider source for this beta
Any special flashing instructions for Boeffla kernel users, or just flash this over Boeffla kernel and wipe dalvik/cache?
Thanks for your great support to Oxygen Os too.
Sent from my ONE A2003 using XDA-Developers mobile app
Kernel Update 0.2
Kernel Update 0.2
Changelog:
I had to remove MSM_Performance cause it made too much troubles cause userspace sends max core commands to it and that ends in laggy cam or other low perfoming apps.
sanjeetkumar495 said:
Any special flashing instructions for Boeffla kernel users, or just flash this over Boeffla kernel and wipe dalvik/cache?
Thanks for your great support to Oxygen Os too.
Sent from my ONE A2003 using XDA-Developers mobile app
Click to expand...
Click to collapse
Flash stock kernel first, then mine, you can download it now at download page
benschhold said:
Flash stock kernel first, then mine, you can download it now at download page
Click to expand...
Click to collapse
Thank you. [emoji4]
Sent from my ONE A2003 using XDA-Developers mobile app
Camera ?
Camera not working after flashing this kernel. I am running an older version of Oxygen Os ( 2.1.2 ) which could be the issue ?
alienrobot said:
Camera not working after flashing this kernel. I am running an older version of Oxygen Os ( 2.1.2 ) which could be the issue ?
Click to expand...
Click to collapse
this is confirmed: Android 5.1.1 , oxygen 2.1.1
Awesome kernel! works like a charm on oxy 2.2.1, faster than stock (for me at least)!
alienrobot said:
Camera not working after flashing this kernel. I am running an older version of Oxygen Os ( 2.1.2 ) which could be the issue ?
Click to expand...
Click to collapse
after upgrading to Ox 2.2.1 camera issue is solved with this kernel.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Patched to Kernel Mainline 3.18.48
Fast Charge Support
Encryption Support
F2FS support
CIFS support
NTFS Support
FIOPS and SIO Schedulers
Supports Stock and CM based ROM's
And Much Much More to come...
Downloads
DarkSense P9000 Kernel 2.0.0
DarkSense P9000 Kernel 2.1.0
Mirror 1
MD5 - ABD03E4AC1A0B0701D46B4ABD08F3F17
SHA-1 - AFE359F94D83BDCE4F6D453D5353651FC251192E
Older:
DarkSense P9000 Kernel 1.2.2
DarkSense P9000 Kernel 1.2.2
Mirror 1
MD5 - D0F6C231A953D7CD237BB8F6E7B7BBFD
SHA-1 - EE216CAB62C36C6C752BEE8028F6F69A1707A63A
XDA:DevDB Information
[KERNEL] DarkSense P9000 Kernel, Kernel for the Elephone P9000
Contributors
Jonny
Source Code: https://github.com/JonnyXDA/android_kernel_elephone_p9000/tree/dev
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 2.1.0
Stable Release Date: 2017-03-03
Created 2016-09-07
Last Updated 2017-03-09
Bugs
Most important (First priority to fix)
None?
Less important
None?
Changelog
DarkSense P9000 Kernel 2.0.0
Fixed issue with the kernel not booting
DarkSense P9000 Kernel 2.0.0
Patched to Mainline 3.18.48
Added initial commits to enable boot on Android N (Note: more work needs to be done on this)
Full Changelog Available Here >>> GitHub
DarkSense P9000 Kernel 1.2.0
Patched to Mainline 3.18.42
Enabed PE
New faster Crypto module from Upstream Google
O3 Optimisation
Add FIOPS and SIO I/O Schedulers
Set SIO Scheduler as Default
Add FSync and make it toggleable
Possible fix for LED notification blinking
Full Changelog Available Here >>> GitHub
DarkSense P9000 Kernel 1.1.0
Patched to Mainline 3.18.41
Improved Fast Charging
CFQ Improvements
Full Changelog Available Here >>> GitHub
DarkSense P9000 Kernel 1.0.0
Initial Release of DarkSense Kernel for Elephone P9000
Reserved
Thax for releasing this! NTFS Support wow! Nice! Justs flashed it on RR Stable 1, still optimising apps guess as i did a wipe cash. Will test and report back. Guess some things from stock will not work in RR as there is the "switch" in the UI missing i guess. But i am really currious.
furchtlos76 said:
Thax for releasiong this! NTFS Support wow! Nice! Justs flashed it on RR Stable 1, still optimising apps guess as i did a wipe cash. Will test and report back. Guess some things from stock will not work in RR as there is the "switch" in the UI missing i guess. But i am really currious.
Click to expand...
Click to collapse
FYI no need to wipe cache when flashing a kernel, same thing with dalvik-cache
Flashd It over aerom V5 just for FCharge, i'll tell later!
Seams not to work with RR somehow, after "optimizing Apps" there was standing Starting Apps... but nothing happens even after 5 Minutes. Reboot, now only RR Logo Animation starting over and over since like 10 minutes.. any idea?
furchtlos76 said:
Seams not to work with RR somehow, after "optimizing Apps" there was standing Starting Apps... but nothing happens even after 5 Minutes. Reboot, now only RR Logo Animation starting over and over since like 10 minutes.. any idea?
Click to expand...
Click to collapse
Odd, I'll look into it later today.
Great work! Do I have to flash Bootloader, lk, etc.. like for latest CM13 or can I just flash over my installed DarkSense 4.1.0 ROM?
hoehm72 said:
Great work! Do I have to flash Bootloader, lk, etc.. like for latest CM13 or can I just flash over my installed DarkSense 4.1.0 ROM?
Click to expand...
Click to collapse
If you have not already done so then yes, this will also mean updating to the latest available TWRP, otherwise you will get bootloops etc.
Ok worked now, maybe was because i gut magisk systemless root, xposed and so on. Well works now, but as i thought smartcase not working maybe as there is no switch in RR? Tryed wsith kernel auditor but there seams nothing like that to tun on/off. Guess need to have go back on one of the stock based roms
@Jonny something different about FP EINT wakelock? In cyanogen seems to be fixed. Many thankss
Well one good thing, proximity sensor seems to work a little better than with the other kernel.
furchtlos76 said:
Ok worked now, maybe was because i gut magisk systemless root, xposed and so on. Well works now, but as i thought smartcase not working maybe as there is no switch in RR? Tryed wsith kernel auditor but there seams nothing like that to tun on/off. Guess need to have go back on one of the stock based roms
Click to expand...
Click to collapse
Root and Xposed (the version before magisk) work fine with this kernel, I have not tested out magisk because it makes too big a mess of my other systemless mods, and when working on my ROM I don't want to switch to magisk then Rovo brings out a completely different official systemless xposed
Jonny said:
Root and Xposed (the version before magisk) work fine with this kernel, I have not tested out magisk because it makes too big a mess of my other systemless mods, and when working on my ROM I don't want to switch to magisk then Rovo brings out a completely different official systemless xposed
Click to expand...
Click to collapse
Well latest xposed, with latest magisk and phh superuser worked fine and works fine with your kernel, nothing negative. just flashed it again. Guess the wipe cache did something wrong. Not everything works again as before just with your kernel. So just have to find out how to enable the magnetic sensor and i am happy. Used greenify and amplify for some tweeks and getting great battery time in standby RR and round 5 hhours screen on time on RR, as poweruser for me its ok, better than my g4 before.
Is it possible to flash your Kernel with CM13 ?
I tried to but I got an error message (footer problem) in the early phase of the flash.
jutaieb said:
Is it possible to flash your Kernel with CM13 ?
I tried to but I got an error message (footer problem) in the early phase of the flash.
Click to expand...
Click to collapse
Flash with TWRP.
Maybe a bug: My camera app (the one that is with RR) closes after every shot, picture is saved but closes than. Seams only in HDR mode, so pro a "old bug" - read bout it several times. Same with the othr kernel.
furchtlos76 said:
Maybe a bug: My camera app (the one that is with RR) closes after every shot, picture is saved but closes than. Seams only in HDR mode, so pro a "old bug" - read bout it several times. Same with the othr kernel.
Click to expand...
Click to collapse
That's a ROM issue then, not a kernel issue if it happens on stock kernel as well.
DarkSense P9000 Kernel 1.1.0
Patched to Mainline 3.18.41
Full Changelog Available Here >>> GitHub
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
* I am not responsible for bricked devices, dead SD cards, or you getting
* fired because the alarm app failed. Please do some research if you have any
* concerns about features included in this KERNEL before flashing it. YOU are
* choosing to make these modifications.
I would like to share with you my personal kernel build. It's based on official OnePlus kernel sources combined with some additional features and commits from different great developers out there.
Features:
No root required
Systemless installation, no custom kernel scripts
Passes SafetyNet
#########################################
OxygenOS build based on official OnePlus kernel source
Custom ROM build based LineageOS kernel source
Compiled with AOSP clang v12.0.5, LLVM tools and LLD linker
Battery_idle mode support [Advanced charging controller needed]
CPU input_boost - [enabled by default]
FSync toggle - [enabled by default]
GPU: adrenoboost [low / mid / high]
KCAL color control
K-Lapse support
Led control [OP6 only]
Minimum backlight control and high brightness option
Scheduler improvements to improve jitter and UX
Sound control and Microfone gain
TCP: advanced TCP algorithms - [Westwood as default]
USB Fast Charge - [disabled by default]
Vibration control
Wakelock blocker
WiFi module picked from CAF's source
WireGuard support
ZRAM improvements [2 GB, zstd compression]
Removed a lot of debugging stuff and log spam
Download:
Latest version: mcd r19FKM Updater config: OxygenOS / custom ROMs
Support:
Leave a like or a comment - this keeps me motivated
PayPal donations are another appreciated way:
Thank you very much!
Telegram contact:
Kernel group: t.me/mcd_kernel
Kernel update channel: t.me/mcd_kernel_builds
Sources:
AnyKernel3: https://github.com/mcdachpappe/AnyKernel3
Toolchain: https://github.com/mcdachpappe/mcd-clang
Credits:
Thanks to these great guys and their programming skills and their sources: acuicultor, arter97, eng.stk, flar2, joshuous, kdrag0n, kerneltoast, kristofpetho, LordBoeffla, nathanchance, osm0sis, RenderBroken, tanish2k09, zx2c4
Huge thanks to @rippledrums for designing our logo!
XDA:DevDB Information
[KERNEL][OOS/CUSTOM] mcd-kernel, Kernel for the OnePlus 6
Contributors
mcdachpappe
Source Code: https://github.com/mcdachpappe/android_kernel_oneplus_sdm845
Kernel Special Features:
Version Information
Status: Stable
Created 2019-05-19
Last Updated 2022-11-26
Installation:
Do not switch between other custom kernels without installing a stock boot.img or reflashing your ROM !
Flash kernel .zip via any kernel manager app or custom recovery
Update:
Flash your desired mcd-kernel version on top of your existing mcd-kernel
Known issues:
OxygenOS:
OOS 11.*: Network speed indicators are not working on any custom kernel
Custom ROMs:
Gestures might not work on some custom ROMs as this kernel uses LineageOS gesture handling
Troubleshooting:
Try one or more of these steps prior flashing this kernel if you run into issues:
Delete your kernel-manager-app data
Dirty flash your current ROM / Flash stock boot.img
If you are still facing any issues, join our telegram group and report your issues via #bugreport.
Kernel history:
! First CAF based kernel build above this point !
build 16-12-2020
build 14-11-2020
build 30-10-2020
build 18-10-2020
build 02-10-2020
build 15-09-2020
build 23-08-2020
build 02-08-2020
build 14-07-2020
! Seperate Kernel for OOS and Custom ROMs below this point!
build 03-07-2020
build 24-06-2020
build 04-06-2020
build 25-05-2020
build 10-05-2020
build 04-05-2020
build 30-04-2020
build 19-04-2020
build 13-04-2020
Awesome! :victory:
Sent from my OnePlus 6T using XDA Labs
Great to see a mix of these three kernels!
GamingDevilsCC said:
Great to see a mix of these three kernels!
Click to expand...
Click to collapse
Wow i remember u from A1 forum,great to see u here!
kernel update: r2
Changelog:
merge stable Linux v4.9.177
add blu_schedutil cpu governor
remove LED control for OP6T
compiler optimizations
misc stuff
Download:
mcd-kernel-op6-r2.zip
Changelog: at pastebin.com or androidfilehost.com
Notes:
Feedback is highly appreciated
You may delete the data of your kernel-tweak app to see/apply the new default values
mcdachpappe said:
Changelog:
merge stable Linux v4.9.177
add blu_schedutil cpu governor
remove LED control for OP6T
compiler optimizations
misc stuff
Download:
mcd-kernel-op6-r2.zip
Changelog: at pastebin.com or androidfilehost.com
Notes:
Feedback is highly appreciated
Telegram-Group:t.me/mcdkernelop6
Telegram-Channel:t.me/mcdkernelchannel
Small note:
I do not like to say this, but since I spent a lot of time on this project, I would be happy if you would consider to do a little donation: paypal.me/mcdachpappe
Click to expand...
Click to collapse
Thanks... Never seen so much battery life and performance in one place... Great kernel... Using 3days... And still solid and smooth
Does this kernel support arter97's f2fs File Based Encryption?
Khaveesh said:
Does this kernel support arter97's f2fs File Based Encryption?
Click to expand...
Click to collapse
Yes... Using it with f2fs... And yes flash f2fs format zip in arters topic then before booting up flash f2fs fstab... Worked fine... Btw this kernel is stable(VERY STABLE FAST AND BATTERY FRIENDLY).... and with f2fs it even can fly...
James Blode said:
Thanks... Never seen so much battery life and performance in one place... Great kernel... Using 3days... And still solid and smooth
Click to expand...
Click to collapse
have you tried the HolyDragon kernel?
(or BluSpark or SmurfKernel?)
how does it compare?
One small bug, the link speed for wifi is always 0.
The wifi works fine though
metaxda said:
have you tried the HolyDragon kernel?
(or BluSpark or SmurfKernel?)
how does it compare?
Click to expand...
Click to collapse
Tried... Not much of different... But this is fast smooth and very battery friendly... Exactly for battery this is a monster... All kernels are good... Tried even arter97, radioactiv, smurf, ex... Etc... Now staying with this
If I'm on oos 9.0.5 with xXx and Renovation rom with stock kernel all I have to do is flash this kernel zip right? No need to flash the boot image?
James Blode said:
Thanks... Never seen so much battery life and performance in one place... Great kernel... Using 3days... And still solid and smooth
Click to expand...
Click to collapse
Which rom are you using?stable or beta?
kakkooran said:
Which rom are you using?stable or beta?
Click to expand...
Click to collapse
Stable
kakkooran said:
Which rom are you using?stable or beta?
Click to expand...
Click to collapse
Stable... 9.0.5... is it working on betas? Cause I always use Stable...
---------- Post added at 06:56 PM ---------- Previous post was at 06:55 PM ----------
akiwiz said:
If I'm on oos 9.0.5 with xXx and Renovation rom with stock kernel all I have to do is flash this kernel zip right? No need to flash the boot image?
Click to expand...
Click to collapse
Yes... BUT FLASH MAGISK AND THEN KERNEL... THAT IS CRITICAL TO FLASH MAGISK BEFORE KERNEL... AND ALWAYS
Smooth as a shark:good:
James Blode said:
Stable... 9.0.5... is it working on betas? Cause I always use Stable...
---------- Post added at 06:56 PM ---------- Previous post was at 06:55 PM ----------
Yes... BUT FLASH MAGISK AND THEN KERNEL... THAT IS CRITICAL TO FLASH MAGISK BEFORE KERNEL... AND ALWAYS
Click to expand...
Click to collapse
I tried this on Beta 18 but it led into brick my phone
kakkooran said:
I tried this on Beta 18 but it led into brick my phone
Click to expand...
Click to collapse
Oh... Maybe this is exactly for stable oos? Idk... What version of magisk did you flashed?and what kind of error did you get? Bootloop or maybe Qualcomm crashdump? Or it is rebooting to recovery?
Kernel is pretty smooth but on the balanced profile the big core is at least 25%-30% on the top frequency just when browsing net or chatting WhatsApp. Normally smurf and holydragon doesn't act like this on balanced profile