Related
Is there a way to tweak the behaviour of the auto-brightness backlight? At the moment it correctly goes up to full brightness in sunlight, but it doesn't go as dim as I would like under artificial light. At home, after dark, under electric light, I can manually turn the screen brightness down to the minimum level, and it's still bright enough - the auto setting is much brighter than that(although clearly much dimmer than it is in sunlight, so it is doing something).
Can this be tweaked? Failing that, is there an easier way to control the brightness manually - something I can keep running all the time, and which doesn't require the stylus to change the setting?
Try GLight
http://www.ageye.de/index.php?s=glight/about
JustBored said:
Try GLight
http://www.ageye.de/index.php?s=glight/about
Click to expand...
Click to collapse
Thanks, I'll give that a try.
I find Lumos to be more stable and reliable
http://forum.xda-developers.com/showthread.php?t=450318
Ok I havn't tried either of them before but I just installed G-Light.
After a bit of config. it's ok. You need to give each backlight number a wider setting.
Otherwise it'll just flip back and forward in brightness.
So far G-Light is proving rather dissapointing. The phone's built-in "Auto" setting works well, apart from the fact that the brightness doesn't go low enough in dim light - in particular, it manages to choose a good level and then stick to it. G-Light, by contrast, keeps changing the brightness up and down all the time.
I think the notion of having absolute brightness bands may be the wrong way to go. You really want a set-up where the threshold values are in different places depending on whether the light is getting brighter or dimmer. So, as the light fades, you cross a threshold and dim the screen - but when the light goes slightly back up over that threshold, you don't brighten the screen again until it gets significantly higher than that. That way, regardless of the light level, the screen brightness will be steady unless the ambient light level is changing a lot. If you use single threshold values then whenever the ambient light happens to be very close to a threshold value you will always get the brightness going constantly up and down.
Edit: some of the things Lumos does (like averaging across multiple readings) sound hopeful, though. I'll give that a try.
Shasarak said:
So far G-Light is proving rather dissapointing. The phone's built-in "Auto" setting works well, apart from the fact that the brightness doesn't go low enough in dim light - in particular, it manages to choose a good level and then stick to it. G-Light, by contrast, keeps changing the brightness up and down all the time.
I think the notion of having absolute brightness bands may be the wrong way to go. You really want a set-up where the threshold values are in different places depending on whether the light is getting brighter or dimmer. So, as the light fades, you cross a threshold and dim the screen - but when the light goes slightly back up over that threshold, you don't brighten the screen again until it gets significantly higher than that. That way, regardless of the light level, the screen brightness will be steady unless the ambient light level is changing a lot. If you use single threshold values then whenever the ambient light happens to be very close to a threshold value you will always get the brightness going constantly up and down.
Edit: some of the things Lumos does (like averaging across multiple readings) sound hopeful, though. I'll give that a try.
Click to expand...
Click to collapse
Let me know how Lumos is.
Yes as I said earlier you need to widen those settings.
For now I have 5 set to 0-81
6 set to 82-200
8 set to 201-600
10 set to 601-1000
All the rest are disabled by setting the values to -1 to -1
HeavyComponent said:
Let me know how Lumos is.
Click to expand...
Click to collapse
Lumos is also proving dissapointing. It's partly the fault of the hardware - the sensor seems to read 0 even in surprisingly bright light, so the app has no way of telling whether you're at a light level where backlight 1 is appropriate or a light level where backlight 3 is appropriate - both read 0 on the sensor. (This is probably why the default auto option doesn't go below 3 in the first place).
As for Lumos, the author needs to realise that perception of brightness is actually based on an exponential curve. That means that all of the values between level 1 and level 5 are somewhere between 0 and 80 sensor reading. The graph interface is useless for editing custom values with that level of precision - it's trying to squeeze over 2000 values into less than 800 pixels of screen space, and the pixels are tiny! I think you can edit the values directly in the settings.txt file, but that's fiddly - there should be spinboxes, really (as with G-Light).
In any case, you don't want to be editing the values directly! What you want to be doing is taking the phone out of your pocket, looking at it, and thinking "hmm, the screen is too bright at the moment" then adjusting the brightness to whatever level is comfortable for the current ambient light level. The programme should then interpolate the curve that you want, and progressively refine it each time you decide it isn't quite right and tweak the brightness.
I haven't tried to Lumos program yet, but I've been using Glight for a few days. At first I had some issues with it but then I realized that you have to turn the auto light adjustment off in settings first. If not, they'll both be fighting against one another.
Also, you have to set your thresholds pretty carefully as has been already stated. Mine is set to go bright only in bright outside and lowest in a dark room with no light at all.
1 0 to 5
3 10 to 799
8 800 to 2500
I've got mine set low for better battery life and the screen is always readable to me no matter what anyway.
Also, if you're using a the snap on rubber protector (I got a T-Mobile one) it will interfere with the light sensor. I just got one and the lighting is all over the place now. Time to order a full body screen protector.
GLight doesn't seem to work for me. keeps crashing, and the settings don't seem to save at all.
I don't want a sliding scale that Lumos has since i don't think the light sensor is all that accurate (sometimes thinks it's too bright and sometimes thinks its too dark). would rather just have a few settings (pitch black setting, super bright setting, and in the middle) as shawndh suggested.
i have the verizon tp2 - not sure if this might be causing some of the glight probs.
You don't want to give your significant other yet another reason to yell at you while you're reading XDA in bed. Rate this thread to express what you think of the Honor 8's display minimum dimness. A higher rating indicates that the display can get extremely dim, ideal for reading in very dark environments.
Then, drop a comment if you have anything to add!
I think the auto brightness makes the screen to dark if the environment is dark. Small letters are hard to read and there is not enough contrast to use the screen comfortably.
Auto brightness is quite poor to be honest. I know it's meant to be improved in a future update though
Update B130 fixed the minimum brightness when set to auto brightness. In a dark environment my phone no longer sets the brightness to an absolute minimum . Haven't tested outside yet, the weather is pretty sh*tty lately.
can get to low brightness to save battery life
Does well, but sometimes the auto brightness dosent work well
sometimes i have to disable/enable auto option from notification menu to correct the auto brightness
Auto brightess may be improved
I dont know if it is a bug but the minimum brightness is on auto when the brightness goes really down.. As much as I have read on auto everybody say that it has a bug to turn down to much indoors.. but I think that it is programmed to work this way to protect the eyes.. but still.. is it to much going down with the brightness?? -Yes, but I think it is ment that way..to protect the eyes and not that it is a bug
Minimum brightness is still too much for me in the dark. So I use a screen filter.
on minimum brightness, no problem in dark room or during night. can use on 10-30% brightness for most of the time and no issues seen
having no problem
Minimum brightness is just the right amount.
You don't want to give your significant other yet another reason to yell at you while you're reading XDA in bed. Rate this thread to express what you think of the OnePlus 3T's display minimum dimness. A higher rating indicates that the display can get extremely dim, ideal for reading in very dark environments.
Then, drop a comment if you have anything to add!
i feel that they need to dim it more, it's still annoying
One thing I noticed is that the phone offers EXTREME fine tune-ing of the lower brightness end.....when I adjust the adaptive brightness, if I click and drag the setting towards the bottom end, there is tons of adjustability available to the user to find exactly how much brightness you want. Having said that, the lowest settings appears quite dim to me (but not 'dangerously' dim)
The lowest setting for me seems to be extremely bright still, for night usage at least. Every other phone I've used has been able to get far more dim.
Anyone know of any way to lower it further actually?
Chipaton said:
The lowest setting for me seems to be extremely bright still, for night usage at least. Every other phone I've used has been able to get far more dim.
Anyone know of any way to lower it further actually?
Click to expand...
Click to collapse
root it and with the help of xposed (or without) you can edit the parameters to make it even dimmer.
vikingsail said:
root it and with the help of xposed (or without) you can edit the parameters to make it even dimmer.
Click to expand...
Click to collapse
What do I edit? I'm rooted with Xposed.
Chipaton said:
What do I edit? I'm rooted with Xposed.
Click to expand...
Click to collapse
check this out.
http://forum.xda-developers.com/showthread.php?t=2367412
This phone is love
OnePlus 3T is just an amazing phone, I loved it
Got the device for a few weeks and there are already burn ins on the left side
If you don't want the hassle of rooting and running xposed you could just install an app from play store, I use lower brightness by Nu-Kob, nothing fancy but it does the job
I'm using rr with magisk (if any of that even matters when it comes to brightness). When the lights are off and I have the brightness all the way up I can barely look at it. But when I turn the brightness all the way down with the lights off it is perfect and I can see everything very clearly and my girlfriend or has an s6 and she is always jealous that when she turns her brightness down it's still blinding. So I think it's great.
Try Velis Auto Brightness https://play.google.com/store/apps/details?id=com.velis.auto.brightness&hl=en
no ads and it works great, tons of parameter to adjust as well.
At night, the brightness is way too much. Observing the display, f.e. playing PoGo in a park at night, you almost get night blind. If you switch automatic brightness off, there is one more step down, but this one is way too dark and without any contrast. Compared to my previous device, it's really bad. I hope, it gets fixed, if possible by the hardware at all.
I also think that the minimum brightness is not dim enough.
I rectify this using an app called Twilight - no root required - which allows to dim + apply red filter
It's usually okay for me, however I use Dimly if I need to go even lower.
With adaptive brightness on my screen frequently (every 20 seconds or so) changes brightness slightly even when the ambient light isn't changing. It's very annoying when reading and most noticeable with light backgrounds.
Is this a common issue or does it sound like I have a defective sensor?
dmacarth said:
With adaptive brightness on my screen frequently (every 20 seconds or so) changes brightness slightly even when the ambient light isn't changing. It's very annoying when reading and most noticeable with light backgrounds.
Is this a common issue or does it sound like I have a defective sensor?
Click to expand...
Click to collapse
Same here.
So annoying I had to turn adaptive off.
Seems to be when I move, probably changing sensor and it's too sensitive. My head mush change/reflect light on sensor
Anyway it's so distracting that I can't use adaptive brightness, except when pitch dark I can set to 0% adaptive to have lowest light output
Sent from my Pixel 2 XL using Tapatalk
Yep, reminds me of a disco strobe light!
No issues here. I actually think the brightness swing is much better than the OG Pixel XL. I can just leave the setting at 50%. On the OG XL I'd have to turn the brightness down in the living room with lighting from 1 lamp and a tv because it'd be burning my retinas.
I installed Lux Dash and disabled "adaptive brightness" and let Lux handle it. You can go into the profile editor for Lux and setup different presets for different levels of light, you can also adjust the min and max allowed brightness and even setup how you want it to adjust brightness (fade, only set on unlock, dynamic, etc)
It has really made this screen amazing and even helps with battery because most the day my screen doesn't go above 15-20%
AndrasLOHF said:
No issues here. I actually think the brightness swing is much better than the OG Pixel XL. I can just leave the setting at 50%. On the OG XL I'd have to turn the brightness down in the living room with lighting from 1 lamp and a tv because it'd be burning my retinas.
Click to expand...
Click to collapse
I've been fine here with the Adaptive Brightness too. Doesn't change too often at all for me.
Sent from my Pixel 2 XL using Tapatalk
I installed Lux also and that did the trick. I assume the sensor is fine since Lux uses it with no problem. It's odd that some of us are having problems and others aren't but it doesn't seem to be a sensor issue.
Having this same issue any solution?
Mzzyhmd said:
Having this same issue any solution?
Click to expand...
Click to collapse
I'm curious but how exactly is it reacting for you? Are you just sitting in bed with the lights on and it's still adjusting up and down the brightness? Cause that's what I'm doing right now and it hasn't fluctuated at all. If I put it on the bedside table it'll brighten up and when I pick it up it dims but that's it.
Sent from my Pixel 2 XL using Tapatalk
Yeah that's too much fluctuations don't you think I mean on my iPhone x or any other iPhone that I have have used so far I never could tell that the adaptive brightness was on but this device does it in an obvious way and way too frequently that im not sure anymore if this is what it's supposed to do I chatted with a Google agent and they forced quit ambient service thing from system apps and I think that still didn't resolve the issue. I will pop up in a vz store tomorrow and check out if their display devices are doing the same
Mzzyhmd said:
Yeah that's too much fluctuations don't you think I mean on my iPhone x or any other iPhone that I have have used so far I never could tell that the adaptive brightness was on but this device does it in an obvious way and way too frequently that im not sure anymore if this is what it's supposed to do I chatted with a Google agent and they forced quit ambient service thing from system apps and I think that still didn't resolve the issue. I will pop up in a vz store tomorrow and check out if their display devices are doing the same
Click to expand...
Click to collapse
I'm curious to hear what the tell you. Lux has helped me a lot bit I still notice it. To be fair I think I only notice in a dim or dark room with the TV on but this is the first phone I've used where it's noticeable to me. I'm also wondering if this is how it's supposed to work or if there's something wrong with my phone.
Mzzyhmd said:
Yeah that's too much fluctuations don't you think I mean on my iPhone x or any other iPhone that I have have used so far I never could tell that the adaptive brightness was on but this device does it in an obvious way and way too frequently that im not sure anymore if this is what it's supposed to do I chatted with a Google agent and they forced quit ambient service thing from system apps and I think that still didn't resolve the issue. I will pop up in a vz store tomorrow and check out if their display devices are doing the same
Click to expand...
Click to collapse
What I described was too much? Sounds appropriate to me. If there's extra light on the phone, I want it to get brighter. If that light goes away, I want it to get dimmer. Now if it was happening with no light changing then I would be annoyed. I keep it at 29% with Adaptive Brightness on and it's not too dark in outside light and not too bright in pitch dark.
Sent from my Pixel 2 XL using Tapatalk
I'm having the same issue. I'm on my second Pixel 2 XL so I don't think it's a sensor problem. I only notice it in lower lighting but it's really annoying when it happens. Haven't seen this issue on any other phone. Im trying out Lux now and set it to only adjust when waking up. There were similar issues when Lux was set to Dynamic.
Ever since Google thought they knew better than everyone else and got rid of auto brightness for adaptive brightness, it's been trash for me. I CONSTANTLY have to raise it in dark rooms and lower it in bright rooms. AKA, I might as well turn it off because I'm manually adjusting it every time anyway.
All in all, it's terrible.
Hobox10 said:
Ever since Google thought they knew better than everyone else and got rid of auto brightness for adaptive brightness, it's been trash for me. I CONSTANTLY have to raise it in dark rooms and lower it in bright rooms. AKA, I might as well turn it off because I'm manually adjusting it every time anyway.
All in all, it's terrible.
Click to expand...
Click to collapse
You know Adaptive Brightness is a mix of manual and auto brightness right? I remember auto brightness actually having the issues you're describing because there was no way to adjust it if it was set. If you have Adaptive Brightness on high enough, it should be bright enough in dark and bright situations. I believe people's issues are that it adjusts too often or the opposite, it's too dark in light rooms and too bright in dark rooms.
EeZeEpEe said:
You know Adaptive Brightness is a mix of manual and auto brightness right? I remember auto brightness actually having the issues you're describing because there was no way to adjust it if it was set. If you have Adaptive Brightness on high enough, it should be bright enough in dark and bright situations. I believe people's issues are that it adjusts too often or the opposite, it's too dark in light rooms and too bright in dark rooms.
Click to expand...
Click to collapse
Yeah I know it's supposed to be a mix somewhat. It's supposed to match the setting you set to whatever the surrounding brightness is relative to your brightness setting.
That's exactly WHY it's trash in my opinion though. It's a flawed methodology. I don't want it matching my setting relative to anything. I want it low in the dark and bright in bright rooms or the sun to be legible and not more. It tries to do some meet-you-in-the-middle garbage and it just doesn't work well.
Hobox10 said:
Yeah I know it's supposed to be a mix somewhat. It's supposed to match the setting you set to whatever the surrounding brightness is relative to your brightness setting.
That's exactly WHY it's trash in my opinion though. It's a flawed methodology. I don't want it matching my setting relative to anything. I want it low in the dark and bright in bright rooms or the sun. It tries to do some meet-you-in-the-middle garbage and it just doesn't work well.
Click to expand...
Click to collapse
I found the threshold for the lowest brightness in pitch dark with Adaptive Brightness on to be 29%. That should be dark enough in dark rooms and outdoors it's readable to me. What percentages have you been trying?
Mines doing the same thing. Did anyone work out whether it was hardware?
I used a sensor app to see what light was reporting, and it was stable. I can only assume it's a bug.
For those who aren't sure - if the screen is on, and not moving, without any changes to ambient or direct light, every 20 or so seconds the screen will dim to a warmer colour, and then 20 seconds later will brighten to a whiter colour.
superbestfriends said:
Mines doing the same thing. Did anyone work out whether it was hardware?
I used a sensor app to see what light was reporting, and it was stable. I can only assume it's a bug.
For those who aren't sure - if the screen is on, and not moving, without any changes to ambient or direct light, every 20 or so seconds the screen will dim to a warmer colour, and then 20 seconds later will brighten to a whiter colour.
Click to expand...
Click to collapse
Yeah I had a feeling that's what people might be experiencing.
To add on to this thread, this is also occuring on my gen 1 Pixel.
Ever since I upgraded to 8.1 the adaptive display will brighten/darken while the phone is sitting still in a constantly lit room.
I also appear to have lost much of the granularity in the brightness selecting bar. The first 25% or so is as dim as it goes, and only after that does it begin to alter the brightness. Previously it would begin around 10% on the bar.
Additionally, the logic behind adaptive brightness seems to have gotten worse. I previously left my brightness setting always in the same place, and no matter where I was it was either dim enough (at night) or bright enough (during the day).
Real unhappy with this update.
Hi everyone. I haven't seen the related kinds of thread so I decided to post it. My device model is G3223.
tl;dr: It's too bright at minimum brightness during nighttime.
So during daytime the screen looks perfectly fine, no problem reading under the sunlight. But when night comes the problem arises because the phone can't go dimer, which means that the phone is still quite bright compare to my other devices when I am trying to read in bed even though the brightness is set at minimum.
Does anyone also facing this issue? Or if it's device model related?
I have the G3221 and I have the same issues. But I found 2 solutions to the problem. (well kind of) if you disable automatic brightness ? setting it will be way too bright. After enabling the auto brightness you can lower it even further. But if it still feels too bright, you can change the white balance settings to 255 which will lower the brightness even further without actually affecting anything. I hope it helps a little. ?
decron04 said:
I have the G3221 and I have the same issues. But I found 2 solutions to the problem. (well kind of) if you disable automatic brightness ? setting it will be way too bright. After enabling the auto brightness you can lower it even further. But if it still feels too bright, you can change the white balance settings to 255 which will lower the brightness even further without actually affecting anything. I hope it helps a little. ?
Click to expand...
Click to collapse
Problem solved. Thanks a lot. I don't know why Sony doesn't allow us to change the brightness to the real minimum point without using automatic brightness.
For white balance I set my phone to a warm colour. For (255,255,255) [r,g,b] the screen looks too cold though, and it can also lower the brightness. I am currently using (255,147,0) so it's at least better than the original setting (0,0,0)
Speaking of warm tones, sony also hides the blue light filter in the actions section which is almost invisible and many people don't even go there. You cannot enable it otherwise. They need work on their stuff.
You can use the Twilight app to use the phone at night without stressing your eyes. It works for me when I'm reading things. ?
And of course you can use this to lower the intensity of the screen's light if not the overall brightness.
Hope this helps.
xperia.sp.lbl.rr said:
You can use the Twilight app to use the phone at night without stressing your eyes. It works for me when I'm reading things.
And of course you can use this to lower the intensity of the screen's light if not the overall brightness.
Hope this helps.
Click to expand...
Click to collapse
Thanks for your advice. As far as I know, apps such as twilight only draw an overlay on the screen, which means it actually doesn't affect the brightness in any ways. It just seems to be darker.
In contrast, decron04's solution can actually decrease the brightness. Don't know why Sony doesn't allow users to minimize brightness without using auto brightness.