Develop Bugs

6/18 BLINDmokee (ROM/PORT) 2.3.7 base {all GSM}

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Finally!!
A port of the popular Mokee OS
with BLINDSMOKE additions!!
WARNING!!! IF YOU ARE COMING FROM AN MTD PARTITIONS ROM, (te4m cm9)
A FULL RE-PARTITION & RESTOCK MAY BE NEEDED TO MAKE THIS
OR ANY OTHER TAB ROM FUNCTION PROPERLY
All your data will be erased, & also your internal SDcard, during a restock​
This is a port of MokeeOS, with blindsmoke additions.
The base rom used was my future BOCA MSI release
Tester score was 9/10!!
"You definitely must release this"
* Use any BOCA kernel!!!!
* P1000 BOCA RC1 kernel included
* automatically record phone calls
* choose to install and run apps on your EXTERNAL SD CARD!!
* English, Spanish & Chinese support
* snappy and beautiful
* GAPPS included
* diz DSP player!!
* many many options and toggles
BUGS
*built in cpu options dont work yet (future release?)
*You must download superuser from the market
*Please be patient with any other found bug,
and report them clearly, by using the contact button in my signarure.
logcats and pictures help alot, as I do not have a SGT7
to see what you are describing.
INSTALL DIRECTIONS * PICTURES
YOUtube video (on a different device)
Mokee gets weekly updates,
But I plan to release only one version of this,
BUT....
Unless you like this OS, and wish further development and support...
VOTE for it HERE
GRAB THE ROM HERE​
If you like my work, please
consider donating so that I might
get my sgt7 fixed and continue
developing​

UPDATES:
6/18
V3 uploaded
http://goo.im/devs/dizgustipated/Roms/BLINDmokee/BLINDmooke_V3.zip
Fixed built in superuser
Removed gapps
Removed adw pro replaced with vtl (with jojimi permision)
Added dolbly, xloud and brava engine
6/13
V2 located temporarily here:
http://forum.xda-developers.com/showpost.php?p=27210697&postcount=14
6/XX....
V3 has Dolby and brava engine, plus super user fix and a few others.
To be announced........
SPECIAL THANKS TO:
MokeeOS
blindndumb
all my testers
(without which, there would be no development or rom releases)
Install Directions
1) Download
2) Place on SD card
3) Boot into CWR
4) Clear user data, dalvic cache & cache
5) Install BLINDmokee
6) Install BOCA kernel of your choice
7) Reboot
8) Boot back into recovery
9) Fix permissions &
10) profit

It looks like v2 Zip file is corrupted
About v1:
* I love the menus, he new layout, the overall appearance
* The ROM is snappy but definitely slower than MSI
* I have an issue with the drop down menu. It works well with ADW @ 240 dpi (ie the original settings)
When I move to 180dpi it still works
When I install my applications, it just get screwed up and never drops down to the bottom and get stuck there with no reaction
Think it comes from bad interaction with Launcher Pro... Will try uninstalling but it could be any of my other apps....
Anyway I think I am just going to revert back to MSI... Spent already too much time experimenting
Since you are into porting other OS, what about this OS called "ICS" ? Ehehe
*** Edit: uninstalled Launcher Pro but my Status Bar is still screwed... Must be another of my apps but can't try one by one...
I guess MSI will remain my main ROM (It's anyway faster)
*** Edit 2: maybe I was unfair about the speed. The CPU wasn't overclocked (Fr some reason) and the governor was not my governor of choice. Nevertheless the issue with the status bar is upsetting me. I just have no idea what is causing this Definitely one of my apps given the fact it happens after restoring my apps through Titanium Backup

Alcibiade said:
It looks like v2 Zip file is corrupted
Click to expand...
Click to collapse
yes, it is
testing: system/app/Auro.apk
error: invalid compressed data to inflate
file #17: bad zipfile offset (local header sig): 6248096
(attempting to re-compensate)
testing: system/app/BladeParts.apk OK
Cinq

Now I am really f#cked...
I cant boot anymore and my tab in CWR refused to go to the end of installaion of any ROM I have on my SD Card
When I switch off the battery charging icon just show grew but doesn't go up to the step where it shows the battery charging. Will try flashing from download mode maybe but now I am really worried. Might have to go through reformating partition but then I'll loose everything I saved on internal SD
Sh#t... Never happened to me before
The error I get is:
assert failed : getprop("ro.product.device") == "galaxytab" etc, etc... (Lots of text
And then E: Error in /emmc/goomanger/BLINDMokee_v1.zip
(status 7)
Installation aborted
Tried from my external SD with other ROMS and get exactly the same message
No...
Anybody has a clue on how to make an Odin package from one of the CWMR zip files? I gess Ill try that first
If not working I might have to go through a repartitioning but does anybody know if I have any chance to accces first to my internal SG to backup all my stuff (from CWMR)... Really worried to loose a lot of data now...
Edit: When i plug the tab it doesn't stay in charging mode, but instead boots into recovery. That's really weird and I am quite worried it is actually not charging... In which case this means I don't have much time before fixing the tab. After that no battery and probbaly no way to charge it... It is not techniclly bricked since I can access CW Recovery and download mode, but I ma quite worried

Is this the awaited update to msi or shall we expect another?

Alcibiade said:
Now I am really f#cked...
I cant boot anymore and my tab in CWR refused to go to the end of installaion of any ROM I have on my SD Card
When I switch off the battery charging icon just show grew but doesn't go up to the step where it shows the battery charging. Will try flashing from download mode maybe but now I am really worried. Might have to go through reformating partition but then I'll loose everything I saved on internal SD
Sh#t... Never happened to me before
The error I get is:
assert failed : getprop("ro.product.device") == "galaxytab" etc, etc... (Lots of text
And then E: Error in /emmc/goomanger/BLINDMokee_v1.zip
(status 7)
Installation aborted
Tried from my external SD with other ROMS and get exactly the same message
No...
Anybody has a clue on how to make an Odin package from one of the CWMR zip files? I gess Ill try that first
If not working I might have to go through a repartitioning but does anybody know if I have any chance to accces first to my internal SG to backup all my stuff (from CWMR)... Really worried to loose a lot of data now...
Edit: When i plug the tab it doesn't stay in charging mode, but instead boots into recovery. That's really weird and I am quite worried it is actually not charging... In which case this means I don't have much time before fixing the tab. After that no battery and probbaly no way to charge it... It is not techniclly bricked since I can access CW Recovery and download mode, but I ma quite worried
Click to expand...
Click to collapse
Kindly contact me, i will walk you through it.
Re uploading v2

antonio91282 said:
Is this the awaited update to msi or shall we expect another?
Click to expand...
Click to collapse
BOCA MSI is a different OS

dizgustipated said:
Kindly contact me, i will walk you through it.
Re uploading v2
Click to expand...
Click to collapse
Thanks a lot... Save me !!

uncorrupted v2 zip.

dizgustipated said:
BOCA MSI is a different OS
Click to expand...
Click to collapse
I downloaded it and installed it. Very nice rom. Beautiful and smooth with lots of goodies. However, I unistalled it after 10 minutes. I downloaded, wiped, wiped, and wiped. Installed, booted, rebooted to recovery fixed permissions "enjoyed ". Camera forced closed every time. Wiped repeated the whole process with an extra wiping. Still no camera. I went to the market and downloaded a camera app but that didn't help.
Nice rom if you can do without the camera.
I can't. I actually use my tab as my only device. Its got to do it all with stability.

antonio91282 said:
I downloaded it and installed it. Very nice rom. Beautiful and smooth with lots of goodies. However, I unistalled it after 10 minutes. I downloaded, wiped, wiped, and wiped. Installed, booted, rebooted to recovery fixed permissions "enjoyed ". Camera forced closed every time. Wiped repeated the whole process with an extra wiping. Still no camera. I went to the market and downloaded a camera app but that didn't help.
Nice rom if you can do without the camera.
I can't. I actually use my tab as my only device. Its got to do it all with stability.
Click to expand...
Click to collapse
testers report fully working camera.
v1 or v2?
device? p1000?
after fully booted, try a kernel from here: http://goo.im/devs/dizgustipated/Kernels

dizgustipated said:
testers report fully working camera.
v1 or v2?
device? p1000?
after fully booted, try a kernel from here: http://goo.im/devs/dizgustipated/Kernels
Click to expand...
Click to collapse
I used the goo manager app that shipped with v2.0.8 rc2. It only gave me one file to download. I just checked... it was v1. I didn't do any adjustments to my kernel, is it necessary to do that,?

antonio91282 said:
I used the goo manager app that shipped with v2.0.8 rc2. It only gave me one file to download. I just checked... it was v1. I didn't do any adjustments to my kernel, is it necessary to do that,?
Click to expand...
Click to collapse
here is uncorrupted v2 zip.
camera seems to work (a tester sent me a video and picture
(tester also adds, "its a neat camera app. love the options)
after fully booted, try a kernel from here: http://goo.im/devs/dizgustipated/Kernels
the landscape kernel is tons better

Diz in testing the BlindMooke I have found it to be fast reliable and everything is working well for me. Currently I am on V2.
Camera works perfectly and I like the app. Nice to have the 2d barcode button there ready to go.
** Note - Update the kernal, I suggest BOCA landscape, no issues with camera after this.
3g works fine and is fast, getting good HSPA speeds. Crossing the harbour bridge in Sydney on my Gs2 using droptus often drops the connection for a short time, using the tab I get a good signal so can't fault it.
After fixiing permissions wifi is fast and connects immediately.
The controls are brilliant, nicely laid out and easy to understand.
I am using SBP 3d launcher, the extra ram from the ROM and kernal allows it to run very well.
In the settings, notification options they menu is all in chineese which so far is the only fault I can find.
I love this rom due to the great layout, good graphics and great functions. To install I followed your intructions.
1. baclup with titanium.
2. factory reset
3. wipe cache
4. wipe dalvik cache
5. Install ROM
6. Install your kernal. Boca Landscape is a good one to use.
7. fix permissions.
8. reboot. wait install super user.
9. reboot and use it.
I have had issues in the past with the camera app FCing, I did a restock at that point to ensure there were no files left over causing me problems. I have not had a problem since and that includes with testing Joy as well as Mooke and blind mooke.
Key here is this ROM is for those who want a good easy to use nice ROM. It does not yet allow you to set your govener, it isn't built for being a rocket but it is nice with many features that are just brilliant.
if you want control, long battery life and high speed go MSI.
If you like another well known look and feel then Diz has something for you as well. For me this is my ROM.

First Diz, I'd like to thank you a million times for your patience nd helping me step by step to get out of the corner where I was stuck. Even though your ROMs were not faulty at all you help me to get my Tab back to normal and fully functioning without any data lost
As far as BlindMOOKE is concerned, I share the opinion below. t looks really nice and is extremely comfortable. It is probably your nicest looking ROM. But for speed lovers MSI is the one
I disagree on one point though: you can have the control of the governor, the overclcking and the undervolting as lo as you ave the right kernel (I use Voltage Control or CPU Master and they both work well with the lndscape knel for instance)
boxhead72 said:
The controls are brilliant, nicely laid out and easy to understand.
I am using SBP 3d launcher, the extra ram from the ROM and kernal allows it to run very well.
In the settings, notification options they menu is all in chineese which so far is the only fault I can find.
I love this rom due to the great layout, good graphics and great functions. To install I followed your intructions.
Key here is this ROM is for those who want a good easy to use nice ROM. It does not yet allow you to set your govener, it isn't built for being a rocket but it is nice with many features that are just brilliant.
if you want control, long battery life and high speed go MSI.
If you like another well known look and feel then Diz has something for you as well. For me this is my ROM.
Click to expand...
Click to collapse

Alcibiade said:
First Diz, I'd like to thank you a million times for your patience nd helping me step by step to get out of the corner where I was stuck. Even though your ROMs were not faulty at all you help me to get my Tab back to normal and fully functioning without any data lost
As far as BlindMOOKE is concerned, I share the opinion below. t looks really nice and is extremely comfortable. It is probably your nicest looking ROM. But for speed lovers MSI is the one
I disagree on one point though: you can have the control of the governor, the overclcking and the undervolting as lo as you ave the right kernel (I use Voltage Control or CPU Master and they both work well with the lndscape knel for instance)
Click to expand...
Click to collapse
Thanks, yes you are right with apps to control the CPU etc but just now the selection of govener isn't available in the ROM.
I am not a power user so this one works for me, I did find issues with autobrightness and the Quick Pic app after taking a photo was crashing. Did an update on that in the market and all is fine with camera and photos.

boxhead72 said:
Thanks, yes you are right with apps to control the CPU etc but just now the selection of govener isn't available in the ROM.
I am not a power user so this one works for me, I did find issues with autobrightness and the Quick Pic app after taking a photo was crashing. Did an update on that in the market and all is fine with camera and photos.
Click to expand...
Click to collapse
If you wanta large choice of governor you ca flash another kernel from Diz
I would advise the Landscape kernel where you have a large choice
They are available on Goo manager

I need testers (i now have 8 roms and need a wider tester base)
please contact me @ [email protected], (gmail or gtalk)
thank you
You must know logcat and how to use heimdall
diz

i've been using this rom for a few days now, and my goodness diz! i love this more than i love msi!
i'll post a long review once i get spare time :-D

Zopo ZP900H - Caesar A9600 - Mlais MX36 - Thread

Hello everyone,
Here a dedicated thread for the fresh Zopo ZP900H - ZP910 - Caesar A9600 (OEM version) and also Mlais MX36 ! (lot of threads on chinese forums...)
Firstly the specifications of the beast,
Band
2G: GSM 850/900/1800/1900MHz
3G: WCDMA 850/2100MHz
Sim Card Dual SIM Card
Shell Material Plastic
Android 4.1.2
CPU : MTK6589, Cortex A7 quad core, 1.2GHz;
GPU : PowerVR SGX 544MP
ROM :4GB
RAM : 1GB
Display Size : 5.3 Inch
Type : IPS screen, capacitive touch screen
Resolution : 960 x 540 pixels
Screen Color : 16000K Colors
Card Extend : Support TF card up to 32GB extended
Dual Cameras, front camera 5.0MP, up to 2560 x 1920
pixels resolution; back camera 8.0MP with flashlight and auto focus,
up to 3264 x 2448 pixels resolution
Language
English, Arabic, Bahasa Indonesia, Bahasa Melayu, Deutsch, Espanol,
French, Italiano, Nederlands, Portuguese, Vietnamese, Turkish, Russian,
Bengali, Persian, Hindi, India Urdu, Thai, Simplified/Traditional Chinese
GPS Yes, built in
WIFI Yes, 802.11 b/g/n
Bluetooth 2.0
Dimensions
148 x 78 x 10mm/5.69 x 3.0 x 0.38 inch
Net Weight(Including battery) 203g
Standby Time about 2~3 days 2300mAh Battery​
-------------------------------------------------------------------------------------/
Chinese official ROM ->
http://zopomobile.com/xiazai.php
Chinese official forum ->
http://bbs.zopomobile.com/forum.php
Chinese official ROM/Tools/Files repository ->
http://pan.baidu.com/share/home?uk=4214607308&third=15
English unofficial forum ->
http://forum.zopomobileshop.com
TWRP ->
https://docs.google.com/file/d/0B2B8oQbsb3G_UnVJaUpXU3lQR2c/edit?pli=1
MTK official Google drivers ->
http://developer.android.com/tools/extras/oem-usb.html#Drivers
http://online.mediatek.com/Public Documents/MTK_Android_USB_Driver.zip
-------------------------------------------------------------------------------------/
Caesar 9600 received ! It's the OEM version of Zopo zp900H (zp910) so I installed directly the official ROM from Zopo.
It works like a charm, here the screeshot about the phone :
i50[dot]tinypic.com/nwypno[dot]png
I upgraded the full ROM via SP Flash Tool.
-------------------------------------------------------------------------------------/
Cheers

Received mine a week. The phone goes pretty good. The only problem is the microphone is not working. An external microphone works, so probably it's a hardware fault. I will contact tomorrow seller support team. Too bad

Received mine a week. The phone goes pretty good. The only problem battery sometimes is heated .
More information about sensors in image.
And rom 4.1.2 custom ->www[dot]needrom[dot]com/mobile/zopo-zp900h-2/
original 4.1.1-> www[dot]needrom[dot]com/mobile/zopo-zp900h/

ocanen said:
Received mine a week. The phone goes pretty good. The only problem battery sometimes is heated .
More information about sensors in image.
And rom 4.1.2 custom ->www[dot]needrom[dot]com/mobile/zopo-zp900h-2/
original 4.1.1-> www[dot]needrom[dot]com/mobile/zopo-zp900h/
Click to expand...
Click to collapse
Mine is pretty good too,
The pros :
- large screen
- very good perfs
- complete package with flip cover, two batteries, screen protection, headset
- CWM and ROM from Zopo work
The cons :
- the speaker are a little weak, you need to increase the volume in engineer mode
- the camera, like many smartphone, is too dark. You need to adjust the exposition or take pictures in perfect conditions
- GPS tweak is needed too, but it's the same on any MTK device
So in a word, at this point, it satisifed me.
I'll contact Zopo to obtain the source code of their ROMS, we need it ! A custom kernel should be a good point.

Hello,
i have my Caesar A9600 from 2 weeks.
Great phone, but i have a problem : the Wifi Mac address change each time i activate Wifi on the phone.
And i use the mac address filter on my Internet Box
p0neyto, do you have the same problem with the ZP910 official rom ?
Thanks.

Ieup_Fr said:
Hello,
i have my Caesar A9600 from 2 weeks.
Great phone, but i have a problem : the Wifi Mac address change each time i activate Wifi on the phone.
And i use the mac address filter on my Internet Box
p0neyto, do you have the same problem with the ZP910 official rom ?
Thanks.
Click to expand...
Click to collapse
Nope, I tested the WiFi card even on Caesar stock ROM (repacked ROM from Zopo) and on Zopo zp900H official ROM.
Under the both version I have the same MAC address...
Maybe the upgrade to the latest version (Android 4.1.2) resolve your problem ... take it on the Zoppo Baidu page (link on the first post).
--------------------------------------------------------/
You can try to read the method to resolve that issue on the Zopo ZP810/ZP800H also known as Hero 7500+.
www[dot]4shared[dot]com/zip/1jIlbJH8/ZP810_wifi_MAC_address.html
Are you sure that you have a ZP900H/ZP910/9600 ?

Ieup_Fr said:
Hello,
i have my Caesar A9600 from 2 weeks.
Great phone, but i have a problem : the Wifi Mac address change each time i activate Wifi on the phone.
And i use the mac address filter on my Internet Box
p0neyto, do you have the same problem with the ZP910 official rom ?
Thanks.
Click to expand...
Click to collapse
:S I not have a problem (I have this mobile) and it is rare, have not you any aplication what change the mac address of the Wifi or aplication of the network ?

Yes, it's a Caesar A9600.
No app installed that can change Mac Address.
I will try to install the latest version from Chinese site.
Is this a mult-language version, and without chinese apps ?
And because i'm a real newbie, where can i find a method to flash an official rom for this phone, with all the steps i have to do ?
PS : i have read that the ZP810 have the same problem on Zopomobileshop forum.

Ieup_Fr said:
Hello,
i have my Caesar A9600 from 2 weeks.
Great phone, but i have a problem : the Wifi Mac address change each time i activate Wifi on the phone.
And i use the mac address filter on my Internet Box
p0neyto, do you have the same problem with the ZP910 official rom ?
Thanks.
Click to expand...
Click to collapse
This isn't a bug, it's standard with the recent zopo and zopo oem releases...
This fix should work with a9600... it works with 950h and 800h
http://chinaphonearena.com/forum/showthread.php?tid=102

Android 4.2.1 for Zopo ZP900H/ZP910, Caesar A9600, Mlais MX36 + TWRP + Root
Jaynes from Zopo technical group released an 4.2.1 ROM:
http://bbs.zopomobile.com/forum.php?mod=viewthread&tid=47239
It comes with the 2.5 GB data mod, HDR Cam and CWM. You can use CWM or flash TWRP - you will need it for rooting.
You will need installed ADM- and VCOM-Drivers, see Gizbeat Combo. Be sure to use version v3.1308.0.125 of SP FlashTool.
No Root: Just flash ROM with SP FlashTool v3.1308.0.125
Root:
- flash ROM with SP FlashTool v3.1
- flash TWRP
- in TWRP go to => ADVANCED => Fix Permission
After restart => Update the SUPERSU and enjoy
OR
- download SuperSU, put in on the SD and install in TWRP
Sources
I uploaded the ROM to another server, because the chinese server is really slow.
Original-DL:
http://pan.baidu.com/share/link?shareid=368366&uk=1361975871
Alternative-DL:
http://www45.zippyshare.com/v/42097964/file.html
http://www45.zippyshare.com/v/72213511/file.html
SP FlashTool v3.1308.0.125:
http://www24.zippyshare.com/v/93583899/file.html
or original complete-DL with ADB- und VCOM- drivers:
http://kuai.xunlei.com/d/jw6hAm.fE2NaUQQA8a5
TRWP:
http://www.teamw.in/project/twrp2
https://docs.google.com/file/d/0B2B8oQbsb3G_UnVJaUpXU3lQR2c/edit => flash with SP FlashTool
SuperSU:
http://forum.xda-developers.com/showthread.php?t=1538053
http://download.chainfire.eu/315/SuperSU/UPDATE-SuperSU-v1.25.zip

That's a really good news :good:, I'll compare the 4.1.2 and 4.2.1 version too.
On the Jaynes's baidu I saw that a LeWa OS version exists too,
pan[dot]baidu[dot]com/share/home?uk=1361975871

tommes-d said:
Jaynes from Zopo technical group released an 4.2.1 ROM:
http://bbs.zopomobile.com/forum.php?mod=viewthread&tid=47239
It comes with the 2.5 GB data mod, HDR Cam and CWM. You can use CWM or flash TWRP - you will need it for rooting.
You will need installed ADM- and VCOM-Drivers, see Gizbeat Combo. Be sure to use version v3.1308.0.125 of SP FlashTool.
No Root: Just flash ROM with SP FlashTool v3.1308.0.125
Root:
- flash ROM with SP FlashTool v3.1
- flash TWRP
- in TWRP go to => ADVANCED => Fix Permission
After restart => Update the SUPERSU and enjoy
OR
- download SuperSU, put in on the SD and install in TWRP
Sources
I uploaded the ROM to another server, because the chinese server is really slow.
Original-DL:
http://pan.baidu.com/share/link?shareid=368366&uk=1361975871
Alternative-DL:
http://www45.zippyshare.com/v/42097964/file.html
http://www45.zippyshare.com/v/72213511/file.html
SP FlashTool v3.1308.0.125:
http://www24.zippyshare.com/v/93583899/file.html
or original complete-DL with ADB- und VCOM- drivers:
http://kuai.xunlei.com/d/jw6hAm.fE2NaUQQA8a5
TRWP:
http://www.teamw.in/project/twrp2
https://docs.google.com/file/d/0B2B8oQbsb3G_UnVJaUpXU3lQR2c/edit => flash with SP FlashTool
SuperSU:
http://forum.xda-developers.com/showthread.php?t=1538053
http://download.chainfire.eu/315/SuperSU/UPDATE-SuperSU-v1.25.zip
Click to expand...
Click to collapse
Hello.
How I extract two files of zippyshare? I cant do with winrar and winzip.
Thanks.

navarro27 said:
Hello.
How I extract two files of zippyshare? I cant do with winrar and winzip.
Click to expand...
Click to collapse
Just downloaded the two files for testing because your complain and extracted them with WinRar 4.01 and TotalCMD 7.56a with no problem. Please try redownloading again.

Caesar A9600 MT6589
Hi I purchased this mobile the Caesar A9600 MT6589 from a Chinese site (mcbub - the worst site I came across in my entire existence) and they are stating that the phone cannot be rooted.
I am a bit afraid to put the original firmware or ROM from z0p0 as I don't wish to brick the phone. is there anything I can check to see if the original ROM fits my mobile?
Cheers

Ivan_076 said:
I am a bit afraid to put the original firmware or ROM from z0p0
Click to expand...
Click to collapse
I have read in several forums, that the Zopo ZP900H/ZP910 and die Caesar A9600 are identical. An that Caesar is the cheaper OEM brand of Zopo. My Caesar A9600 runs with zero problems with the Zopo Firmware.
Install CWM or TWRP, make a backup of the stock firmware and feel free testing.

how do you flash to a new firmware? is it by using SPtools or by CWM?
Is there step by step of flashing?
Solved: SP_Flash_Tool Thanks

I received the ZP900H last week. It came with firmware 130226 (4.1.2). I actually downloaded the firmware from the manufacturer website and rooted it before I get the phone. I found this firmware quite sluggish.
Then I know about the Jaynes ROM. The Jaynes 130319 (4.1.2) ROM definitely feels faster and smoother than the 0226. It is rooted and has CWM. I only have one complaint - web browser scrolling (stock and Dolphin) is quite slow. It seems to resist my finger moving the screen, and there is no scroll inertia. Pinch zoom is fast and smooth, much better than the previous FW.
I also tried out Jaynes 4.2.1 firmware but I don't like it - feel like I am back to the sluggish 0226 FW. Btw the Jaynes 4.2.1 firmware does NOT have root (no superuser / supersu app or su binaries) - I have to unpack system.img and add su binaries myself.
Overall the performance is good for the price of the phone - full HD videos (web browser Flash video or downloaded videos on MX player) have no trouble at all. It does NOT feel any faster than my Galaxy Note N7000 with the dual core Exynos 4210 and Mali 400. I don't have a quad core GN2 to compare. One minor thing is that the Developer options are incomplete (in fact you can only access three items - stay awake, USB debugging, allow mock location). I prefer access to all the tweaks.
Battery life with the 4.1.2 FW is OK - wifi access to the internet playing youtube or vimeo flash videos last about 4-4.5 hours.

MT6589 twrp
MT6589 Partition(6M) is too small, Able to remove the root?

Has someone tested the GPS during navigation?
Is the accurency enough strong to use in a car as a real GPS?
Thanks.

Tested GPS on a 60 kilometers route in a small city without high buildings, country roads and highway. GPS application was iGO Primo. GPS-fix was fast, but I added modded gps.conf for my country before. There was no loss of GPS connection on my trip - I am satisfied and would recommend this this phone for car navigation.

POMP C6S 5.5" NFC/Octa-Core 1.7GHz MTK6592 2GB RAM/32GB ROM DualSIM / 1920x1080 FHD

POMP C6S 5.5" NFC/Octa-Core 1.7GHz MTK6592 2GB RAM/32GB ROM DualSIM / 1920x1080 FHD
Topic is about the new POMP C6S 5.5" NFC/Octa-Core 1.7GHz MTK6592 2GB RAM/32GB ROM DualSIM / 1920x1080 FHD.
Let us collect all hacking & development info here about this device, and help each other.
First impressions
This is a really HIGH QUALITY phone from China.
What I like about it? I like the simple square design, and the screen is big and clear, when off the screen is 100% black (not grey). Also the phone is pretty thin. Another great plus is the high build quality and that it has REAL features like NFC, OTG, MHL/HDMI, WIFI DIRECT/Miracast and 2GB RAM/32GB ROM!
Pros: The phone is very fast! 28800 in AnTuTu says it all. High build quality and very good materials. The screen is also of a very high quality, and the fact that the whole screen is totally black when off is something I really like. The batterylife is very good, it seems to be a true 3000 mah battery in this device. The phone has a dedicated hardware button for the camera. The SIMtray is a dualsimtray for 2 micro SIM cards. The reception/signal is strong in this device, so far I had no problems when talking with people. The sound/backspeaker and headphone quality is also very good and loud. The phone support real OTA, OTG, MHL, Miracast, Airgestures in both ways and NFC which is real nice features.
Cons: The UI is not everyones taste - but you can just install another launcher! No notification LED as far I can see.
The lockscreen is pretty standard. The backcover can not be removed, also the builtin memory can't be extended, but it comes with total 32GB ROM. The price for this phone is a bit high, but on the other hand, you get a phone with high quality! For some people this phone may be too big, it has a 5.5 inch screen.
Benchmarks
AnTuTu score is: 28822
http://peecee.dk/uploads/052014/Screenshot_2014-05-17-19-05-42_big_thumb.png
http://peecee.dk/uploads/052014/Screenshot_2014-05-17-19-05-57_big_thumb.png
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Highlights
- 5.5 inch IPS Screen, 1920*1080 pixel display
- MTK6592 1.7GHz Octa core
- 2 GB RAM + 32 GB ROM
- Dual Sim, Dual Standby
- Support 3G & H Plus network
- GSM 850/900/1800/1900 & WCDMA 850/2100 MHz
- 13MP SONY back camera + 8MP front camera
- Airgestures, GPS, Bluetooth 4.0
- Dimensions (W×D×H): 151 x 77.5 x 7.7mm
- 3000 mAh battery
- OTG, MHL/HDMI, WIFI DIRECT/Miracast
- NFC built-in that works exactly like on original brands!
Issues:
No notification LED
You can use app NoLED instead from the PlayStore and get small notifications on the screen.
ROOT:
Use http://www.shuame.com/en/root/
or you can also try with vROOT
Camera Test Samples:
http://peecee.dk/uploads/052014/IMG_20140517_140444.jpg
http://peecee.dk/uploads/052014/IMG_20140517_135629.jpg
http://peecee.dk/uploads/052014/IMG_20140517_140202.jpg
http://peecee.dk/uploads/052014/IMG_20140516_010532.jpg
Original picture: http://peecee.dk/uploads/052014/S1280018.JPG
Original picture: http://peecee.dk/uploads/052014/S1280008.JPG
Original picture: http://peecee.dk/uploads/052014/S1280007.JPG

Hi my friend, i have a question for you, whats the way for watching WIFI DIRECT/Miracast in tv? any program or procedure, please explain, thank you in advance

petertrol said:
Hi my friend, i have a question for you, whats the way for watching WIFI DIRECT/Miracast in tv? any program or procedure, please explain, thank you in advance
Click to expand...
Click to collapse
Hey, you can see how it work here in my video https://www.youtube.com/watch?v=ws8_aZ2Gsg4
it is basically the same for the Pomp C6S (and all other MTK6592) as for the phone I use in that video.
You just need a TV with miracast builtin, or an external miracast dongle connected to it. Then on the phone you go in the settings and connect it. You don't need any extra software etc.
The POMP also support cable, MHL to HDMI, so you can connect via cable also to a TV.

Thank you i will try

By the way, here you have updated version v2.03 multilanguage for this phone ive already uploaded in case you dont have installed (i dont think so normally it comes with v2.00) http://www.needrom.com/mobile/pomp-c6s-2/ and tell me how it works with your phone, it seems to be bit better

petertrol said:
By the way, here you have updated version v2.03 multilanguage for this phone ive already uploaded in case you dont have installed (i dont think so normally it comes with v2.00) http://www.needrom.com/mobile/pomp-c6s-2/ and tell me how it works with your phone, it seems to be bit better
Click to expand...
Click to collapse
Hi thanks, I have 2.02 it seems. So 2.03 have how many languages? Do I just put C6Spomp_92_cn_fhd_en_fomat_v2.03_kashua.zip on the sdcard in the root? and then choose update from locale file in the settings? or just with Spflashtool?
How did you root your C6S?
Any other changes in 2.03? And do I have to clear any caches or factory reset afterwards? Where did you get 2.03 from? (sorry for all the questions )

s7yler said:
Hi thanks, I have 2.02 it seems. So 2.03 have how many languages? Do I just put C6Spomp_92_cn_fhd_en_fomat_v2.03_kashua.zip on the sdcard in the root? and then choose update from locale file in the settings? or just with Spflashtool?
How did you root your C6S?
Any other changes in 2.03? And do I have to clear any caches or factory reset afterwards? Where did you get 2.03 from? (sorry for all the questions )
Click to expand...
Click to collapse
its always recommended when install rom wipe date, cache and dalvik cache, but do as you like, i did all that...i installed it from recovery no spflashtool needed (install update from zipcard) i didnt use local update and dont know changelog but if its an upgrade i think something will improve, i hope
For rooting use: vroot http://www.mgyun.com/en/getvroot easiest way
i got if from manufacturer
Cheers

petertrol said:
its always recommended when install rom wipe date, cache and dalvik cache, but do as you like, i did all that...i installed it from recovery no spflashtool needed (install update from zipcard) i didnt use local update and dont know changelog but if its an upgrade i think something will improve, i hope
For rooting use: vroot http://www.mgyun.com/en/getvroot easiest way
i got if from manufacturer
Cheers
Click to expand...
Click to collapse
Great thank you. Did you also try to install CWM via MTKdroidtools on it?

s7yler said:
Great thank you. Did you also try to install CWM via MTKdroidtools on it?
Click to expand...
Click to collapse
Yes, i have my automade CWM via mtkdroidtools as you said, i expect to have kitkat in this phone very soon

petertrol said:
Yes, i have my automade CWM via mtkdroidtools as you said, i expect to have kitkat in this phone very soon
Click to expand...
Click to collapse
mm, when I try to root with vroot, the tools reboots the phone, but then the phone stops at some screen saying that it want to restore the phone. But when I accept or deny it, it seems nothing more happens with vRoot, and it times out and fail? any suggestions?
Or how was the process when you did it with vRoot?

s7yler said:
mm, when I try to root with vroot, the tools reboots the phone, but then the phone stops at some screen saying that it want to restore the phone. But when I accept or deny it, it seems nothing more happens with vRoot, and it times out and fail? any suggestions?
Or how was the process when you did it with vRoot?
Click to expand...
Click to collapse
¿?Nothing of this happens to me, just only plug phone and run vroot, connect device, install or update program downloading some archives, at the end of this proccess vroot teel you model and if its possible root, you just push root and it does the rest, the phone will reboot 1 or 2 times and finally youll see rooted on program and the phone will have installed vroot program (like su) and other chinese one like google play, try again and be patient if you dont have powerful pc it takes a bit longer

petertrol said:
its always recommended when install rom wipe date, cache and dalvik cache, but do as you like, i did all that...i installed it from recovery no spflashtool needed (install update from zipcard) i didnt use local update and dont know changelog but if its an upgrade i think something will improve, i hope
For rooting use: vroot http://www.mgyun.com/en/getvroot easiest way
i got if from manufacturer
Cheers
Click to expand...
Click to collapse
thank you so much,i was looking for this for a long time.

watalee said:
thank you so much,i was looking for this for a long time.
Click to expand...
Click to collapse
Welcome
If somebody know any new rom update or something that improve performance of phone please post it here. Thank you

Hello my friend, do you recommend this phone?
I think Coolicool.com is a very good shop to buy

emilitoo997 said:
Hello my friend, do you recommend this phone?
I think Coolicool.com is a very good shop to buy
Click to expand...
Click to collapse
I agree, and yes the phone is really nice and in a good quality. 100% recommended.

s7yler said:
I agree, and yes the phone is really nice and in a good quality. 100% recommended.
Click to expand...
Click to collapse
do you know how to flash MIUI ROM to POMP C6S?

watalee said:
do you know how to flash MIUI ROM to POMP C6S?
Click to expand...
Click to collapse
Sorry no, I only know the MIUI launcher, check here https://www.youtube.com/watch?v=a8xBTiEdCuE

petertrol said:
¿?Nothing of this happens to me, just only plug phone and run vroot, connect device, install or update program downloading some archives, at the end of this proccess vroot teel you model and if its possible root, you just push root and it does the rest, the phone will reboot 1 or 2 times and finally youll see rooted on program and the phone will have installed vroot program (like su) and other chinese one like google play, try again and be patient if you dont have powerful pc it takes a bit longer
Click to expand...
Click to collapse
Ok I used http://www.shuame.com/en/root/ instead now, and with that it worked right away, don't know why I was unable to root it with vROOT but nevermind, and thx for your help.
Did you try any of the custom roms on needrom? http://www.needrom.com/?s=POMP+C6S&sa=search&scat=0
I see there are 3 custom ROMs now for the C6S.

s7yler said:
Ok I used http://www.shuame.com/en/root/ instead now, and with that it worked right away, don't know why I was unable to root it with vROOT but nevermind, and thx for your help.
Did you try any of the custom roms on needrom? http://www.needrom.com/?s=POMP+C6S&sa=search&scat=0
I see there are 3 custom ROMs now for the C6S.
Click to expand...
Click to collapse
i try the MIUI rom,very good, smooth but some applications can not install
Sent from my POMP C6S using Tapatalk

Has anyone a Multilanguage ROM?
I´m looking for a backup of etotalk rom, has anyone the possibility to upload a copy of this rom?
Thanks! :good:

Elephone P2000 NFC/MTK6592 1.7Ghz Fingerprint ID 5.5" HD IPS Android 4.4.2

ELEPHONE P2000 MTK6592 1.7GHZ Octa Core 5.5 inch HD IPS Display Android 4.4.3 3G Smartphone
UNBOXING VIDEO, AND FIRST HANDS ON
(As a bonus I also unbox the Elephone W1 Elegante Smartwatch)
FULL VIDEO TEST
Elephone P2000 vs. Sesonn C1000 (Star C1000) / Quick Comparison
More info in the video description on Youtube!
Highlights
♦ 5.5 inch Screen, 1280*720 pixel display
♦ MT6592 1.7GHz Octa core
♦ Support 3G network: GSM 850/900/1800/1900 & WCDMA 850/2100 MHz
♦ 2GB RAM + 16GB ROM
♦ 13MP back camera + 8MP front camera
♦ F/2.2
♦ The latest Android 4.4.2 System
♦ NFC + Fingerprint ID
♦ Notification LED
♦ Dual SIM / SDCard slot,
Bugs/Cons:
In stocklauncher with stock firmware you can not add widgets. But you can install another launcher, then it will work fine.
This is soon going to be fixed in a future update according to the manufacture.
No backlight in the touchbuttons.
Device will get a little hot around the camera area on the back, when running 3D games.
Camera could be better, but it is generally ok for the price!
New Firmware with fixed Widgets & Off Screen Gestures
http://bbs.elephone.hk/forum.php?mod=viewthread&tid=287&extra=page=1#.U91MXP8cRdg
MIUI Beta (thanks to N2k1)
https://www.dropbox.com/s/0dxp1xq3zxj9zkf/Eleohone-P2000_Miui_4.7.18_fullota.zip
Fingerprint ID/scanner:
It works okay, but mostly just a gimmick!
ROOT
Can be done with vRoot 1.7.8 (from official site)
Or find pre-rooted firmware on needrom.com (remember to update vROOT to latest version after the flash).
GPS
GPS is good, it locks in between 40-55 seconds.
MIUI Launcher that can be used on the phone
https://www.dropbox.com/s/7nlb3qm78p513t2/MyUI_Launcher.apk
http://www.mediafire.com/download/71ry8z0beu3b854/MyUI_Launcher.apk
Codes: Informations *#*#116#*#*
Camera foto samples:
http://peecee.dk/uploads/072014/IMG_20140722_232645.jpg
http://peecee.dk/uploads/072014/IMG_20140722_201518.jpg
http://peecee.dk/uploads/072014/IMG_20100101_094035.jpg
http://peecee.dk/uploads/072014/IMG_20100101_094021.jpg
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Original http://peecee.dk/uploads/072014/DSC04825.JPG
Original http://peecee.dk/uploads/072014/DSC04831.JPG
Original http://peecee.dk/uploads/072014/DSC04829.JPG

Hi,
Great start of new topic/model, and nice links to possible fixes.
I just received my Elephone P2000 and after a few days I am still in doubt about it.
It is a lot of phone for little money, but looking at the specs I had my expectations set a bit higher.
Okay, maybe I am a bit prejudiced as I use this phone to replace my iPhone 5s
I ran into the same issue with adding Widgets, so I am glad there is a fix. Thanks for that !
The main problem I am still facing (and on bbs.elephone.hk I read that I am not the only one) is the Wifi connection. It keeps dropping at random. This makes the phone utterly useless for me since push mail, whatsapp, newsflash, etc are simply unreliable
I think the 720p screen is not as bad as some reviewers state. Even for a big 5.5" screen it is quite okay. Still in doubt if 5.5" is the right size for me
The camera however is a real disappointment, 13MP but grainy and unfocused.
Battery runs out quite fast. Even without WiFi, Bluetooth and GPS I managed to run out within 4 hours of fiddling around.
Although memory seems plenty, I ran out of memory quite rapidly when installing software, and found that adding a microSD card and using APP2SD solved my problem.
It took me a while to figure out how to place the 2 SIM cards (1 regular and one micro) and the microSD memory card, but once I managed to fit them this really works fantastic.
I hope Elephone will come up with more software updates since this could really be a nice phone for a nice price, and 5.5" is really in the demand at the moment.
Keep up the good work with adding updates and user experiences! Thanks !

Thanks for your feedback! I agree that the phone can not be compared to a iPhone 5. But also remember the huge price difference!
You also cant compare a Porsche with an Audi, both fine cars, but they are not the same class and cost different.
Regarding the WiFi, it is strange, because I have not experienced any problems with the WiFi on mine. It always works stable. But I agree that the camera could have been much better, its not super good. Just ok for fun pictures I would say.
Battery in standby mode is good for me, several days, but when I use it, only max 1 day. But try to disable GPS and Googles location service, it uses a lot of extra battery! And if it doesn't help, turn the brightness of the screen 10% down.

excuse me guys...it's vroot secure for unlock the elephone? i read about a malware in vroot process....

phoenix530 said:
excuse me guys...it's vroot secure for unlock the elephone? i read about a malware in vroot process....
Click to expand...
Click to collapse
Hi,
I used VRoot 1.73 from vrootdownload.org and mgyun.com/en/GetVRoot since this was supposed to be in English. The newer 1.7.8 seems to be available only in Chinese, and my Chinese is quite limited
Installation is quite easy (start the setup on your Windows machine/virtual-machine and do not choose all the extra software and browser add-ons, start the VRoot program, hook up the phone to your system, press ROOT...and wait..phone reboots and windows software states 'rooted'). After installation I found 2 Icons with chinese text on the phone, 1 containing (chinese) advertisements and links to other software from the developer mgyun, and one supposedly something to do with the rooting/super-user proces (also most text and choices in chinese). The rooting proces is quite simple...and appears successful (apps requiring root access do start).
However, chinese pop-ups keep coming up when a proces requires root/superuser access and I have no clue what choices to make.
This made me decide to 'unroot' and remove the software. The chinese advertisement link remains on the phone, but this can easily be uninstalled.
---------- Post added at 09:48 AM ---------- Previous post was at 09:33 AM ----------
s7yler said:
Thanks for your feedback! I agree that the phone can not be compared to a iPhone 5. But also remember the huge price difference!
You also cant compare a Porsche with an Audi, both fine cars, but they are not the same class and cost different.
Regarding the WiFi, it is strange, because I have not experienced any problems with the WiFi on mine. It always works stable. But I agree that the camera could have been much better, its not super good. Just ok for fun pictures I would say.
Battery in standby mode is good for me, several days, but when I use it, only max 1 day. But try to disable GPS and Googles location service, it uses a lot of extra battery! And if it doesn't help, turn the brightness of the screen 10% down.
Click to expand...
Click to collapse
I completely agree that this phone is in another league and cannot be compared to iPhone. The price is incredible for this phone, plus the huge 5,5" inch screen (bigger screens seem to be the current 'fashion'), dual sim, and the fantastic specs made me buy it. Without looking at the specs (octacore, memory, fingerprint, ips, etc) I would have been amazed...simply because of its price and neat design.
I have seemed to narrow the WiFi problem down to problems with DHCP. When I assign a fixed address the phone disconnects (according to wifi fixer) and reconnects, but when using dhcp things appear to go wrong. At home of course I can assign a fixed address, but at work and public places this is no option. There seem to be multiple users on the elephone forum that experience similar wifi problems, so I hope there will be a fix.
Interesting to see if there will be a stable and supported version of MIUI rom for the P2000, did you try the beta ?
Thanks!

phoenix530 said:
excuse me guys...it's vroot secure for unlock the elephone? i read about a malware in vroot process....
Click to expand...
Click to collapse
Just flash this ROM with Spflashtool from needrom http://www.needrom.com/mobile/elephone-p2000-3/
After that you will have ROOT, not with vROOT but with normal SuperSU (not in Chinese). Also this ROM fixes the widgets and gives you wake gestures, so you can for example draw a C when the screen is off and it starts the Camera, or you just double tap to wake the screen.
I did not try the MIUI beta, because some features still don't work.

tnx
i prefer make root in a clean rom. can i use framaroot? i don't see elephone in compatibility list...any one have used frama root?

phoenix530 said:
i prefer make root in a clean rom. can i use framaroot? i don't see elephone in compatibility list...any one have used frama root?
Click to expand...
Click to collapse
That ROM is clean, it is from Elephone and also the only ROM that fixes the widgets. Framaroot cant root this phone. If you want to root your old ROM manually you can only do it with the "read back method" and MTK droidtools plus Sp flash tool.
Read back root tutorial here by ITXtutor (but it is more complicated)
http://www.china-devices.com/Thread-100-Working-ROOT-CWM-Readback-your-ROM-with-SP-Flash-Tools

ok
mhmm...ok i think that i try needrom's rom xD hahaahahaha
so..i read this in rom description:
I do NOT recommend to flash the "Preloader" so please untick that part in SP Flash Tools before you flash!
(You can flash it anyway without the Preloader, then it will just keep your original on the phone).
ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.
Click to expand...
Click to collapse
any info about this? i have elephone p2000 with old rom. can i flash full rom with preloader or not?

phoenix530 said:
mhmm...ok i think that i try needrom's rom xD hahaahahaha
so..i read this in rom description:
any info about this? i have elephone p2000 with old rom. can i flash full rom with preloader or not?
Click to expand...
Click to collapse
Just untick the Preloader in Spflash tool after you loaded the scatter file and before you then flash, so you flash everything but the Preloader. Its safer to keep the original Preloader intact on the phone.

s7yler said:
Just untick the Preloader in Spflash tool after you loaded the scatter file and before you then flash, so you flash everything but the Preloader. Its safer to keep the original Preloader intact on the phone.
Click to expand...
Click to collapse
it's first time that i don't flash preloader...in my old zopo 910 i always flash preloader. new rom with old preloader create any compatibility problem or not?

phoenix530 said:
it's first time that i don't flash preloader...in my old zopo 910 i always flash preloader. new rom with old preloader create any compatibility problem or not?
Click to expand...
Click to collapse
No, there is no problem that you don't flash the Preloader. The Preloader is the same, both ROMs are 4.4.2 Kitkat, only change is that the new ROM has fixed widgets and some extra features. Even IF there should be a problem, you could always flash the preloader afterwards again. But it is recommended never to flash the Preloader, better just leave the original on the phone. But if you want you can also just try to flash it, should be okay. But its not necessary.
On older devices, flashing the Preloader could brick them (in the told days) therefore it is not recommended. And you don't need to flash the Preloader when you flash new ROM, so why run the risk?

s7yler said:
No, there is no problem that you don't flash the Preloader. The Preloader is the same, both ROMs are 4.4.2 Kitkat, only change is that the new ROM has fixed widgets and some extra features. Even IF there should be a problem, you could always flash the preloader afterwards again. But it is recommended never to flash the Preloader, better just leave the original on the phone. But if you want you can also just try to flash it, should be okay. But its not necessary.
On older devices, flashing the Preloader could brick them (in the told days) therefore it is not recommended. And you don't need to flash the Preloader when you flash new ROM, so why run the risk?
Click to expand...
Click to collapse
ok man i don't flash never preloader. tanks for the info so...many people tell me that last elephone rom have low speed problem and bad camera software..it's true? is there any method for resolve these problems? is there any custom rom in program?

phoenix530 said:
ok man i don't flash never preloader. tanks for the info so...many people tell me that last elephone rom have low speed problem and bad camera software..it's true? is there any method for resolve these problems? is there any custom rom in program?
Click to expand...
Click to collapse
No the ROM don't change your camera or speed. Its the same as you current ROM, just with some fixes. If your not satisfied with the ROM then just flash the old ROM back again. The stock normal ROM can also be found on needrom.com

s7yler said:
No the ROM don't change your camera or speed. Its the same as you current ROM, just with some fixes. If your not satisfied with the ROM then just flash the old ROM back again. The stock normal ROM can also be found on needrom.com
Click to expand...
Click to collapse
ok tanks i flash your rooted rom now and i hope in a future custom roms! i hope in a working miui or cyanogen...

s7yler said:
but with normal SuperSU (not in Chinese).
Click to expand...
Click to collapse
SuperSU can give problems with this ROM and some applications that can be resolved by replacing SuperSU by Superuser from ClockworkMod.
I had problems with Titanium Backup and those were solved by the change above.

Which USB drivers P2000 and Win 8.1 64bit?
Can anyone tell me which usb drivers to use for Elephone P2000 in Win 8.1 64bit.
Droid Tools en SP Flashtool do not see my phone.
Thanks in advance.
Update:
I used a windows 7 PC with pdanet mtk drivers and was successfull in flashing my phone!!!

Android or MIUI
Hi,
I followed your instructions and was able to flash the P2000. Thanks for the instructions and the link to the ROM
When starting I noticed that the icons look quite different from the default Android icons, they look much more like the MIUI icons. Is the ROM from your first post really a factory ROM provided by Elephone ??
The new ROM btw still has many of the original problems (WiFi and memory plus power management) but at least the widgets can be added and SuperUser works, so I am quite happy with it.
Thanks
s7yler said:
No, there is no problem that you don't flash the Preloader. The Preloader is the same, both ROMs are 4.4.2 Kitkat, only change is that the new ROM has fixed widgets and some extra features. Even IF there should be a problem, you could always flash the preloader afterwards again. But it is recommended never to flash the Preloader, better just leave the original on the phone. But if you want you can also just try to flash it, should be okay. But its not necessary.
On older devices, flashing the Preloader could brick them (in the told days) therefore it is not recommended. And you don't need to flash the Preloader when you flash new ROM, so why run the risk?
Click to expand...
Click to collapse

OTG
Anyone used OTG yet?
I cant get the phone to recognize a usb-stick......
I anyone has OTG working please share your experience.
Greetz
Rik Lijkendijk

RikLIjkendijk said:
Anyone used OTG yet?
I cant get the phone to recognize a usb-stick......
I anyone has OTG working please share your experience.
Greetz
Rik Lijkendijk
Click to expand...
Click to collapse
The OTG works in mine, you can see it here in my video https://www.youtube.com/watch?v=kZdbQgL4p70&t=7m54s at time 7:40
Try to format in fat or fat32 maybe? or try another stick? also what firmware are you using?

[ROM] [AROMA] [ULTIMATE Note 7 Hybrid] [N930PVPU1APGC] [v1.1] [updated 5/12/2017

Ultimate Note7 Hybrid aka UN7​The next generation ROM for the Sprint Galaxy Note 4!​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
About ROM​Warning: This ROM is ONLY for the Sprint SM-N910P!!! DO NOT FLASH THIS ROM ON ANY OTHER MODEL!!! If you do then please don't ask for help in this thread. You are on your own! Know what you are doing before flashing and modifying your phone!!! Yes this is an amazing rom BUT it is for the Sprint network model SM-N910P ONLY!!! Please resist the urge to flash this rom on any other model. This is your fair warning.
Initial Release: v1.0
This is a "stock" build with no custom mods other than unlocked native hotspot
Fully deodexed framework and system apps
I built the entire rom and made underhood adjustments as needed. There is way too much work to list here!!!
Root by @Chainfire
Busybox
Init.d support
100% Sprint Note 7 framework and system apps.
100% Sprint Note 4 system files for hardware & feature dependecies.
This rom is guaranteed to bring new life into your Note 4 and make you love it again!
Software version: N930PVPU1APGC
Kernel: Official Samsung N910PVPS4DPJ1 modified to support Samsung UX software
Features​This is a mostly stock rom running the stock Samsung kernel. Although there are no major problems in the rom, I do plan to continue making fine adjustments in order to make this rom as perfect as I can. However, it is a port and many things have been done precisely for the smoothest and most trouble-free operation. Expect minimal issues. Currently this rom is amazing. In the future it will be even more amazing. The ROM includes all working features of the Sprint Note 7 software version N930PVPU1APGC excluding items listed below.
(other than iris and fingerprint scanner and fm radio)
All stock Samsung and Google apps as well as the main Sprint apps like Visual Voicemail and Sprint Zone
Native Hotspot unlocked
Disabled High Volume Warning
5-way Reboot mod for convenience
Removed Itson
Removed/Disabled Knox and related apk's & libs/modules
Removed Sprint bloat installer and Sprint ID
Removed WhatsAppDownloader
Removed Facebook and facebook feature apps (can be downloaded from Google Play)
Removed Samsung Pay and Payment Framework (they are useless on rooted roms since they don't work if you have a rooted system or have tripped knox flag)
There are a few csc tweaks as well as build.prop tweaks. The usual. Nothing far from stock.
Added the following apps:
Peel Smart Remote ( Why not? The Note 4 has a IR blaster unlike the note 7 )
GifMaker app (is an add-on feature for the stock Samsung photo gallery and can be found in the stock gallery's menu)
Samsung fonts package (can be accessed from fonts settings. There's a lot so it takes a few seconds to load them all. When you open fonts settings be patient, they will load)
S7 Edge Nougat TW Launcher
Chinese Smart Manager because it's prettier!
Added Features:
None at this time
Known issues:
This is the list of known minor issues upon initial release.
Always On Display aka "AOD", Edge Lighting and Night Clock are obviously not gonna work properly.
(I have it turned off by default. You can enable it and play with it as well as try different "AOD "fixes" that may be available)
Fingerprint Scanner not working (Workaround added)
No Iris Scanner (I removed instances of Irus scanner in setting because obviously the N4 has no Iris scanner module)
FM radio is broken (I plan to fix this in the future as time permits. (I simply did not make this a priority )
WiFi calling is impossible to fix. (The IMS versions of N4 and N7 are very different. No way to fix this with the N7 dialer)
Update PRL and Profile is not working yet. I plan to fix this when I have more time. Fixed by @jc.m !!!
Launcher swiping left and right has a glitch where it sticks if you press to swipe between home screens
(use short "flicks" instead and there's no issue swiping left & right) Fixed! Flashable zip fix is in post #2
Lockscreen pin/password entry causes reboot.. Fixed by @carlosggb !!!
There are probably a few more minor things that i'm forgetting so I will work on a more precise bug list as I get to them.
***Please report any issues or bugs if you find something. Also PM me so your report doesn't get overlooked in the thread***
Changelog​***v1.0 Initial release (rom features listed above)***​***v1.1 Aroma Update***​REBOOT UNLOCK ISSUE FIXED!!!! @carlosggb
PRL UPDATE FIXED!!!! (Thanks @jc.m!!!!)
3minit Battery and Clock Added!!!
Default DPI changed to 560 (from 640)
MTP Dialog removed
Call Recording (With auto call recording to all numbers or specific numbers!)
AOD Tweaks added (Including custom brightness)
Added Fingerprint workaround (Instructions Detailed on Post #5)
Gestures and TWSwipe added to Stock Launcher
Launcher flicker fixed (Thanks @tx_dbs_tx!!!!)
Added Viper4Android
UHQ Modded Camera
DolbyAtmos added
Camera Flash mod under 15%
Added Extra Toggles!! (Thanks @ianmb!!!)
All apps multiwindow and multi-instance
USB Plug/Unplug disable wake up
Installing app older versions over newer allowed
A Couple of bootanimations included
Fixed Gallery bug (Thanks @ianmb!!!)
Fixed Calendar bug (Thanks @ianmb!!!)
Fixed Keyboard bug (Thanks @ianmb!!!)
Added Updated PhotoStudio (Thanks @ianmb!!!)
Added RomControl
Home button Wake via romcontrol
Inmersive Mode via RC
Permanent Notifications Removable (Toggle in RC)
IME Notifications Removable (Toggle in RC)
Custom Screen Off Timeout added to RC
Added DBeditor, Adaway and Texdroider DPI Changer apps
More Csc tweaks
And a few things more i don't remember​
Flashing instructions:​Before you flash this rom you absolutely MUST be running the latest N910PVPS4DPJ1 firmware for the Sprint Note 4. Specifically the bootloader and modem. Your phone needs to be fully activated prior to flashing any custom rom to ensure a trouble-free transition to this rom. Before you flash this rom, while on a stock Sprint N4 rom, go to Settings/System updates and update PRL then update Profile. Reboot your phone and then go to Settings/Activate this device and launch it to properly activate your phone on the Sprint network. Once this completes, make sure data, calls messaging/mms and gps works as it should. Once everything is activated and working, then proceed with the flashing instructions below. If you ignore this requirement please expect issues and don't ask for help until you do these initial steps.
If you are running software older than PJ1 then you can either take the ota updates in order on your phone via OTA updates, or use odin to flash the software in order of release until you are fully updated. OTA updates on your phone are installed differently than odin packages therefore you may only have to take one or two updates to become current. The OTA updates run scripts to patch your current rom unlike odin tar packages that completely write the entire partition replacing everything clean. I will not go into great detail about that here. I have covered this many times in my other threads so if you aren't sure then do some searching here in the Note 4 forums. If you already updated your software past the PJ1 version then you can try to flash the rom BUT you could possibly have hardware issues with wifi, etc. So if you want to play it safe, revert to the official PJ1 firmware which can be done by odin flashing the stock N910PVPS4DPJ1 software on your PC or a custom firmware only package that can be packaged for this purpose. Just ask if you need help finding it there's a couple of people here that can help with that. My advice is to run this rom with the PJ1 firmware for the best results since the kernel, modules and hardware specific software is based on version PJ1.
***Before you flash this rom, please make sure your battery has at least 30% charge***​
OK... Lets begin!
1. Download the rom
2. Check the MD5!!! Use a MD5 checksum tool on your pc or phone (Google is your friend)
3. Copy the downloaded rom to your phone's internal storage or micro-sd card
Note: It has become apparent to me that if you are coming from another custom rom, especially another port rom, that you MUST also wipe your internal storage. Left over data from other roms DO cause major problems! So if you want the best trouble-free experience with this rom, I highly recommend that you backup anything you need from you internal storage and wipe it in recovery. You should do this before placing this rom on your internal storage or else put the rom zip on your micro-sd card.
4. Backup anything you need to backup from your internal storage and copy it to your pc or sd-card (DO NOT RESTORE BACKED UP APPS! INSTALL THEM FRESH FOR THE BEST TROUBLE-FREE EXPERIENCE!)
5. Reboot to TWRP custom recovery. Press "Wipe". Do the "Factory Reset" several times then go into "Advanced Wipe" options and wipe Dalvic-Cache, System, Data, and Cache several times.
6. Go to recovery home screen and select "Install" and select the rom zip that you have already copied to your phone in step 3 above. Install the rom and the script will prompt you to reboot system when it is finished flashing.
7. The initial boot process will take around 12 minutes. Please be patient. It WILL boot.
8. Once the phone has booted and you will see "Installing Applications". The phone will reboot once during this process then continue installing upon reboot.
9. Once you reach the setup wizard ...
10.Reboot to Recovery and Flash Modset, pick your options in the Aroma!!
11.Once you are back to the Wizard Proceed as usual and setup your phone. At the very last step when allowing the weather location access the phone will reboot one more time. Upon reboot you will be at the home screen.
12.If you picked Magisk as your root method, go to the Download folder and install MagiskManager apk or you wont have root access!
13.That's it! You're done! You are now going to smile as you experience the best ROM for the Sprint Galaxy N4 to date.
Note: Immediately upon reaching the home screen you may notice some lagginess. This is due to Google and Samsung accounts syncing all of their respective account features at once. I highly recommend that you first go to cloud/sync settings and set these account options right away to conserve battery and data usage Uncheck the things you don't want or need.
Enjoy the official Note 7 port ROM for the Sprint Samsung Galaxy Note 4! Please feel free to post rom feedback and support questions.
Credits​Without the following people NONE of this would be possible. Period.​@Chainfire for root and SuperSU. Thank you!​@iBotPeaches for the continued development and support of apktool. Thank you!​@JesusFreke for smali/baksmali tools! Thank you!​
ROM Development​tx_dbs_tx​
Modset Development​carlosggb​
Hybrid ROM Testing & Troubleshooting Team​The following XDA members contributed to the success of this ROM​(in alphabetical order... more people will be added)​@Cflynt​@freeza​@ianmb​@ipodhacked86​@jc.m​@Jhill110​@kenjesse​@LMMT​@Qubanaso​@SaintZ93​@samep​@wantedman76​@Zaileion​
Follow me on my google hangouts for current and up to date discussions on current and future rom projects! We have fun and talk about anything! Just PM me your gmail address and I can add you to my Hangouts. Don't forget to introduce yourself with your XDA username so other people will know who you are. See you there!
Donate​(Click the paragraph below or the orange "donate" button below my avatar from any of my posts)​I want to kindly ask that each person who downloads this rom to please consider making a donation for all of my time and hard work! I spent months on this and many long nights getting thing working right for everyone here to enjoy. It was grueling at times. It's not the amount that counts, it's the fact that you took the time to donate that means the most to me. It is truly appreciated and it shows me that people do appreciate what I do for the community. Without this kind of gesture developers like myself are not inclined to continue devoting this kind of work in the future. Depending on the downloads-to-donations ratio for this rom, I will take this into consideration when deciding on any future projects. Thank you to everyone for your continued support!​P(lease enter your XDA username in the "Notes" section of you PayPal transaction)​
Top Supporters​@radjay​@Hec1N1​
DOWNLOAD​( MD5 checksums are provided below. They are the same regardless of link used )​Ultimate Note7 Hybrid SM-N930P v1.0​MD5: F44AB6C8CB762CD912FDA26610233293​
UN7 Modset v1.1​MD5: 65ABD93452608DD53B91EE18F8A34AD9​
Alternate links​Ultimate Note7 Hybrid SM-N930P v1.0​UN7 Modset vv1.1​
XDA:DevDB Information
ULTIMATE Note 7 Hybrid [N930PVPU1APGC], ROM for the Sprint Samsung Galaxy Note 4
Contributors
tx_dbs_tx, carlosggb
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: N910PVPS4DPJ1_N910PSPT4DPJ1_N910PVPS4DPJ1_HOME
Based On: AP_N930PVPU1APGC_CL8706608_QB10377011_REV00_user_low_ship_MULTI_CERT_meta
Version Information
Status: Stable
Current Stable Version: 1.1
Stable Release Date: 2017-05-12
Created 2017-01-14
Last Updated 2017-08-25

Holy cow it's TX... Sup man? I have moved on to an unlocked Note 9 (Snapdragon) that I'm using on a tracfone related service. For which I got a t-mobile tracfone sim for easier compatibility with wifi calling. Which now works by the way. Saving $$ on a phone bill has actually freed up $ for other cool things/projects like doing some TV repair. Haven't felt any need to root actually. I use it for work big time now & don't want to complicate things. Moved away from Sprint which was the only issue with this ROM but you had a solution for that too.
Sprint gone now (on its way out)
Sent from my SM-N960U1 using Tapatalk

Fixes and Additional Files
SMS/MMS​During testing a few people had issues with sms/mms not sending after a reboot. The guys figured out a fix for this problem so I created a flashable fix which will be copied to your sd card upon flashing the rom. If you definitely have a problem sending sms/mms and it becomes a constant thing then you need to flash this fix. It's a simple edit in one xml file in csc. Simply flash AlternateSmsMmsSendingFix_UN7_Hybrid_by.txdbstx.zip
and reboot. That should fix the sms/mms sending problem.
==========================================================================
Root & SuperSU after a factory reset​The original SuperSU root package will also be copied to your sd card during the rom flash. You will need this if you do a factory reset because you will lose root. Simply flash SR1-SuperSU-v2.78-SR1-20160915123031.zip in recovery AFTER you have done a factory reset AND rebooted your phone at least once.
==========================================================================
Samsung Gallery​If your photo thumbnails disappear in Samsung Gallery then wipe the data and cache for Gallery in "Applications" section of Settings. This should fix the problem. :good:
==========================================================================
The Notorious TouchWiz Launcher Swipe Glitch​Flash this UN7-TW-Launcher-Fix-by-tx_dbs_tx.zip and the bug will be gone. You can use any compatible TW launcher without worrying about the launcher swipe glitch. Remember, this fix took me a while to figure out. It should work on other N7 port roms that have the same issue. But please do NOT reupload or post other links to my fixes in other rom threads. Instead, direct people here to this post and make sure people understand that there is a real fix for this problem and I am the one who took the time to fix it 100%. Thank you and enjoy!

Kernels
​I highly recommend that you NOT flash kernels from other N4 variants. They likely have different configs for those models. It's not worth it. If you didn't listen to this advice and flashed a different kernel and need to flash the original kernel, check out the recovery flashable kernels here.
==================================================​Original Ultimate Note7 PJ1 Kernel​This is the original PJ1 kernel that is specifically modified for this UN7 Hybrid ROM. (Includes original root package)​UN7_Hybrid_SM-N930P-PJ1-KernelOnlyPlusRoot.zip​==================================================​BeastMode r61 PJ1 Kernel exclusively for Ultimate Note7 Hybrid ROM​This is a custom tweaked Samsung PJ1 kernel that is specifically modified for this rom by none other than @freeza.​BeastMode-Kernel-r61-MM-N910P-PJ1-RAGE-UN7-Hybrid-ROM​
==================================================​BeastMode r61 PJ1 Kernel "ZEROLEMON" exclusively for Ultimate Note7 Hybrid ROM​This is the exact same kernel as above except it supports ZEROLEMON and other extended capacity batteries.​BeastMode-Kernel-r61-MM-N910P-PJ1-RAGE-ZL-UN7-Hybrid-ROM​
For kernel source & details on BeastMode Kernel vist freeza's THREAD​

Rules for this thread
I want to keep this thread 100% positive with zero negativity. So I ask that everybody here please treat others with respect and don't post rude or insulting comments towards other people. Nobody here is perfect and I know for a fact that everybody has something to offer so never underestimate the other girl/guy. I have learned that the best people are those who have not been given the chance to shine. Trust me. Thanks for keeping the thread awesome!!! :highfive:
My fellow dev friends will help out as much as they can. So if you ask a question and I haven't replied, most likely someone here will see your post and try to lend you a hand. So just know that the guys who are part of my private dev group are patrolling these forums and they have my permission to offer advice etc in my absence. They are familiar with the rom and it's progression from the beginning so you can trust their input. Thank you. And don't forget to rate this thread at the very top!

STEPS TO SETUP FINGERPRINT (LONG BUT VERY DETAILED TO PREVENT ISSUES )
1. ALL FILES NEEDED ARE PUSHED TO YOUR PHONE DOWNLOAD FOLDER WITH THE INSTALLATION OF THE MODSET
RESPECT THE SEQUENCE, DON'T CHANGE ORDER AND DON'T SKIP STEPS!!!
2. install and Open Applock ( apk is in internal storage/Download)
3. open AppLock / set master pin
4. go to settings tab then password settings
5. Select lock type (make sure password(pin) is set by default or change to one of the other options)
6. go to settings / Enable Service - Tick / App Lock - Tick (but it should be ticked by default)
7. go to Home Screen Lock / Switch on Home Screen Lock
8. Setup Authorization email (required)
9. Select AppLock as Launcher (then app lock will ask you what launcher you wish to use, you can change this later if you install a different launcher)
10. App lock will close / reopen app lock and enter pin
11. Apply Lock Convenience Feature - Tick
12. exit AppLock by pressing home button
13. go to phone settings / accessibility / scroll down to services and switch on AppLock / enter pin
MAKE SURE TO GIVE ACCESSIBILITY ACCESS TO THE APP BY GOING TO THE SYSTEM SETTINGS ->ACCESSIBILITY, SCROLL TO SERVICES AND SWITCH ON APPLOCK BEFORE DOING STEP 14!!!!!
14. reboot into recovery / flash N4settings.zip (internal storage/Download) and reboot
***It is CRITICAL that you follow these next steps VERY SPECIFICALLY and DO NOTHING ELSE***
15. go to UN7 RomControl / Misc and Launcher Tab / Select Fingerprint Management
16. Select Fingerprint manager to register fingerprints / click ok
17. swipe down on home button repeatedly until it says complete (should be 10 times)
18. Setup Backup Password
19. Do NOT Enable Fingerprint Lock (select cancel)
20. Add 2nd and 3rd fingerprint (you can use this to add additional fingers)
21. Reboot into recovery / flash N7settings.zip (internal storage/Download) then reboot
22. Open App Lock / Enter Pin
23. Select settings tab then password settings / Use fingerprint - Tick
24. Go into phone system settings / Lock Screen and Security / Select Screen Lock type NONE
25. Open UN7 RomColtrol and open Mod Centeral / Select AddBlocker and enable
26. Reboot
27. Profit!!

Thank you! Can't wait to try this out. Downloading now and have to update bootloader. Will report back later on.

Enjoy this guys...long time in the making!

Yeah guys, you're in for a treat. This one's a game changer.
Sent from my SM-N920P using Tapatalk

Just out of curiosity as I wait for everything to download, does this have themes working?

OMG, It's here! :victory:
I was feeling depressed today, and then i saw this!
Downloading now, can't wait to flash.
:highfive: Thank you @tx_dbs_tx and team, for all your hard work and time involved to bring us this awesome rom!
I'm sure it'll be great! :good:

fredgar75 said:
Just out of curiosity as I wait for everything to download, does this have themes working?
Click to expand...
Click to collapse
This is the real deal. Themes absolutely work!

aaron74 said:
OMG, It's here! :victory:
I was feeling depressed today, and then i saw this!
Downloading now, can't wait to flash.
:highfive: Thank you @tx_dbs_tx and team, for all your hard work and time involved to bring us this awesome rom!
I'm sure it'll be great! :good:
Click to expand...
Click to collapse
And Thank you Ohio for making America Great again! Enjoy!

tx_dbs_tx said:
And Thank you Ohio for making America Great again! Enjoy!
Click to expand...
Click to collapse
For Sure!!! plus also Donation Sent! :good:

ok currently i am at the restoring screen restoring a bunch of apps. i'm asssuming that means they get installed fresh and not as restored from a backup. When you said dont restore from backup you were refering to titanium backup or similair?

He has done it again....good work
Im still runnin Hybrid 3.0 im looking forward to this.

Thank you very much...I have been waiting for this.
I am now on PK1... Anyone tried it on PK1?
If I want to downgrade to PJ1 via odin my device won't brick?

anees02 said:
Thank you very much...I have been waiting for this.
I am now on PK1... Anyone tried it on PK1?
If I want to downgrade to PJ1 via odin my device won't brick?
Click to expand...
Click to collapse
just odin bl/fw is the easiest/fastest way rather than odin the entire stock rom.
i odin'd from PG1 to PK1 and vice versa

KLPFL said:
just odin bl/fw is the easiest/fastest way rather than odin the entire stock rom.
i odin'd from PG1 to PK1 and vice versa
Click to expand...
Click to collapse
Then I will delete all files from the PJ1 tar file except aboot file only and flash?

anees02 said:
Then I will delete all files from the PJ1 tar file except aboot file only and flash?
Click to expand...
Click to collapse
if you know how... you would need to have two tar file.. one for baseband and one firmware.
---------- Post added at 04:16 PM ---------- Previous post was at 04:12 PM ----------
give me a second.. i'll upload the PJ1 bl/fw for you...
---------- Post added at 04:20 PM ---------- Previous post was at 04:16 PM ----------
here is the BL/FW i created:
uncheck auto reboot under Option on Odin app...
load the firmware or baseband doesn't matter which one is first... pull battery after you odin one of them, then reboot in download mode volume down + home + power keys at the same time. odin the other file, pull out battery then reboot into recovery then flash your rom... of course your rom has to be in External SDcard and make sure you follow Ops installation instructions.
https://www.dropbox.com/s/juzvlftjbeltrfr/N910P-PJ1-baseband.tar?dl=0
https://www.dropbox.com/s/pf62zcb422nnqfn/N910P-PJ1-firmware.tar?dl=0
Updated download link.. go here.
https://forum.xda-developers.com/no...-baseband-file-to-flash-t3573701/post71463151

I finally got this up and running. Thank you thank you thank you! It is running great so far. Gonna give it a couple of days to settle and will report back if I find anything. And yes, themes are working great.