-----ROOT AND INSTALL CUSTOM RECOVERY ON MICROMAX A75 WITHOUT PC-----===========================
Procedure:
1.Download the following package:::::link:Root_&_recovery_for_MMX_A75 - Download - 4shared
2.Extract the package and place the three files in the package to theroot of your sdcard with Rootexplorer.
3.Download the root explorer from here and install it.:::::link:Root Explorer v2.20 - Download - 4shared
4.Now reboot in to recovery mode.5.select update zip from sdcard and select the superuser.zip.(it willget flashed and then select reboot).Now your mobile is rooted.You can see superuser app in menu.
6.Now install mu73.apk and open it.
7.After opening it superuser asks you to allow the app.Press Allow....Next Tap on the "flash recovery from sdcard"......and next tap on the recovery.img file.(It'll automatically reboots in new custom recovery).8.That's it you have installed custom recovery.===========================
Disclaimer:
This method had WORKED for ME.
Am not responsible if your mobile is BRICKED.
DO AT YOUR OWN RISK.IF YOU DON'T WANT TO TRY THIS METHOD, THEN YOU CAN USE ANOTHER METHODS PRESENT IN THE FORUM.
Thank you,
Regards
Shrikant......
shrikant716 said:
-----ROOT AND INSTALL CUSTOM RECOVERY ON MICROMAX A75 WITHOUT PC-----===========================
Procedure:
1.Download the following package:::::link:Root_&_recovery_for_MMX_A75 - Download - 4shared
2.Extract the package and place the three files in the package to theroot of your sdcard with Rootexplorer.
3.Download the root explorer from here and install it.:::::link:Root Explorer v2.20 - Download - 4shared
4.Now reboot in to recovery mode.5.select update zip from sdcard and select the superuser.zip.(it willget flashed and then select reboot).Now your mobile is rooted.You can see superuser app in menu.
6.Now install mu73.apk and open it.
7.After opening it superuser asks you to allow the app.Press Allow....Next Tap on the "flash recovery from sdcard"......and next tap on the recovery.img file.(It'll automatically reboots in new custom recovery).8.That's it you have installed custom recovery.===========================
Disclaimer:
This method had WORKED for ME.
Am not responsible if your mobile is BRICKED.
DO AT YOUR OWN RISK.IF YOU DON'T WANT TO TRY THIS METHOD, THEN YOU CAN USE ANOTHER METHODS PRESENT IN THE FORUM.
Thank you,
Regards
Shrikant......
Click to expand...
Click to collapse
Are the packages signed????
UPDATED INSTRUCTIONS 23/3/2014
Thought I would share this for anyone that's looking for a complete and full root of this phone, this is not my work I was given these instructions for full root of Sony Xperia M Phone by member xzn credits go to him and others mentioned within method here is the method as follows
- FULL ROOT XPERIA M -
material
- Download Framaroot 1.5.3(http://www.2shared.com/file/x5aus8Wd/comalephzainframaroot_153.html?)
- Busybox Pro v9.7.3 (http://www.2shared.com/file/gPQlU2-Q/BusyBox_Pro_9_7_3.html?)
- Busybox Free (https://play.google.com/store/apps/details?id=stericson.busybox)
- Tool By Anto Kus (download here http://www.2shared.com/file/e9sDTGJk/rootfixer.html?)
- some snacks and soda
steps
1. Install framaroot 1.5.3 ,open , then select install supersu, then select gandalf, if its failed, try, try n try until success notification appear and ask to reebot,your phone will reboot, after your phone on again , look for supersu app in menu , if supersu not appear in menu try,try n try again until supersu appears
2. Install BusyBox Pro v9.7.3 , if busybox ask for backup, select yes, then busyboz will loading, after 100%, MAKE SURE BUSYBOX IS INSTALLED IN SYSTEM/XBIN select install, select normal install, after success,reboot your XM
up here, Your phone was half rooted (what is half rooted? its mean that your phone can not edit system file, if you try to edit your system file your XM will sudden reboot) (THIS STEP IS SO YOU CAN CREATE A BACKUP OF YOUR SYSTEM SETTINGS BEFORE BUSYBOX IS INSTALLED BUT IF YOUR NOT BOTHERED ABOUT A BACKUP THEN YOU CAN SKIP INSTALLING THIS BUSYBOX VERSION AND DOWNLOAD THE BUSYBOX FREE AND USE THAT ONE TO INSTALL THE LATEST VERSION STRAIGHT AWAY)
3. eat your snack and drink your soda, stay relax 
4. Extact Tool by Anto Kus to your pc (you will get superuser.bat and supersu.bat), then connect your XM (connect by msc and you must have install pcc on your pc), then run supersu.bat when prompted grant root access on phone
your xm will reboot
Once phone reboots wait for pc to detect phone again then finish supersu.bat then unplug device, MAKE SURE TO RERUN THE. bat FILE AGAIN AFTER FIRST REBOOT TO DOUBLE CHECK THAT THE REBOOT FIX HAS BEEN INSTALLED CORRECTLY, BEFORE RUNNING THE SCRIPT AGAIN AFTER PHONE HAS BEEN DETECTED BY THE PC UNPLUG THE PHONE THEN RERUN THE .bat FILE.
5. DOWNLOAD THE LATEST BUSYBOX FREE FROM PLAY MARKET AND LET SMART INSTALL FINISH LOADING, ONCE LOADED SELECT LATEST BUSYBOX VERSION (CURRENTLY AT V1.22.1-stericson) AND MAKE SURE ITS INSTALLED IN SYSTEM/XBIN. ONCE INSTALLED REBOOT PHONE THEN YOUR DONE
Credit to
- Xzn
- Anto Kus
- Hendrico Andre and Muhammad Arif
from Sony Xperia M Indonesia :highfive:
EXTRA
1: BUSYBOX MUST BE INSTALLED TO SYSTEM/XBIN TO WORK IF NOT AND SYSTEM/BIN IS SELECTED THE PHONE WILL REBOOT AND BUSYBOX WILL NOT BE INSTALLED
2: ALL DRIVERS MUST BE INSTALLED ADB ETC...
3: USB DEBUGGING AND MSC MUST BE SELECTED AND TURNED ON
HOW TO UNROOT LONG VERSION:
*only if you used busybox pro*
1. go into busybox and click on restore, let it do its job. A confirmation popup will appear
2. Go into supersu>settings and scroll down to unroot, click it and let it finish
3. Reboot device (NOTE IF YOU'VE RESTORED VIA BUSYBOX THEN SYSTEM WILL BE VERY LAGGY)
4. Go into settings and carry out a factory reset to clear the device fully.
HOW TO UNROOT SHORT VERSION:
1. Refresh stock firmware via flashtool and select wipe cache and wipe data
2. Let device boot up, can take upto 5+ minutes to boot up.
Sent from My Sony Xperia M C1905
Indeed anyone tried binary4u?
Thanks for this detailed guide..
I have problem ( or better - my brother ) after succesfull root, run rootfixer, but thats not fix anything... phone still rebooting if i want change some in /system ...please help
icoolguy1995 said:
Indeed anyone tried binary4u?
Click to expand...
Click to collapse
Did you install busybox I have tried and tested this method several times and never had any problems follow instructions closely
Sent from my C2005 using xda premium
Ignore the quote as xda app giving me.issues and not selecting the correct post to quote
Sent from my C2005 using xda premium
yes, installed... (and backed up, and wait for 100% loading, then install - normal)
i folowed closely, and still have problem.
Installed busybox to system/xbin?
Sent from my C2005 using xda premium
dont know... but when i now open busybox pro, its pointing to system/bin ...So you think i have to change destination to xbin and install it again ?
Install busybox to system/xbin
You'll get a confirmation screen saying busybox has been installed successfully then reboot your phone once booted up rerun root fix for the superuser app you installed then once phone has booted up again try then
Sent from my C2005 using xda app-developers app
Any luck did that work?
Sent from my C2005 using xda app-developers app
Many THANKS !!! It working now !!!
mmm273 said:
Many THANKS !!! It working now !!!
Click to expand...
Click to collapse
Not a problem I'll try and update that section of the guide
My xda app is playing up everytime I click on original post it FC. I'll try on my laptop
Sent from my C2005 using xda app-developers app
Hello
I have installed supersu, and BusyB to xbin and after running supersu.bat (xm is connected in msc mode and pcc is installed correctly) i have that message like on scrrenshot and nothing happens
new version
delete:
Im using framaroot 1.6.0 (even 1.6.1 is out there) and its hals rooting my device (like in the guide)
After all operations i cant edit system files :crying:
Do i have to turn on USB Debugging ? Its not mentioned in the guide but i find it in this thread
http://forum.xda-developers.com/showthread.php?t=2450265
Im asking because i cant check it since 7 pm
i cannot access the server to the tool by anto kus
can anyone provide mirror for that link
thanks
Found it usb debugging needs to be enabled for root fix so enable it
I'll upload the tool when I get in from work I have it on my laptop
Sent from my C2005 using xda premium
aser44 said:
Hello
I have installed supersu, and BusyB to xbin and after running supersu.bat (xm is connected in msc mode and pcc is installed correctly) i have that message like on scrrenshot and nothing happens
Click to expand...
Click to collapse
Make sure USB debugging is enabled and that PCC has installed the drivers. It didn't work for me either but after PCC installed the drivers it found my device.
This message was brought to you by my Sony Xperia M (C1905), using the XDA app.
OK, finally it worked. Everything like in the guide + enabling USB Debugging
PANASONIC T11 ROOTING AND RECOVERY CONSOLE
Steps:-
A: Download the below software Root Master and Rooting app.
http://www.4shared.com/rar/ejsZUzzC/Android_root_all_mobile.html
B: Follow instruction on this below url for Screenshots support only rest given below
http://forum.xda-developers.com/showthread.php?t=2403230
C: Android 4.1.2 Rooting Universal Method Modified steps
1. Install drivers of your mobile
2. Run RootMaster and press first button on first screen
3. After this click the center button on all windows
4. You mobile is rooted - Reboot your mobile
5. Close the RootMaster
6. Install SuperSU.apk and grant superuser permission when asked after launch
and Delete your superuser.apk from /system/app using root explorer or uninstall
7. This release of superuser.apk is not english
D: Use Xposed framework modules for Boot into recovery and many more working perfect on Panasonic T11
CWM for Panasonic T11
Any CWM recovery and custom roms for Panasonic T11?
HELP
Any developer please make a recovery and a stock rom for this phone. Or please make a modified Systemui.apk . The signal bars and battery are not themed well in the stock rom. Please
My this post may be considered as a sequel to my previous post about the easiest way to root t2 ultra dual {.472} {5.0.2}
Now the way to root our t2 ultra dual {5.1.1} {.182}:
Download the ftf file of latest firmware 19.4.A.0.182 (search on google)
Download latest version or V 0.8 of prf creator (search on google and get xda link)
Download SuperSU.zip (search on google)
Now put the prf creator somewhere in your PC (let's say on desktop) extract it there.
Add ftf file and superSU.zip in prf creator
Mark all the boxes on right side of prf creator window
Hit create. In 15-20 minutes you will get a zip file named "flashable" in prf folder
Copy this flashable zip and put it in root of SD card of your phone.
Now reboot your phone in recovery
after rebooting into recovery, follow in sequence:
Wipe
Advanced wipe
select:
cache
dalvik
system
data
internal memory
swipe to wipe
go back to recovery home
tap install
select external sd card
select that flashable zip
swipe to flash
wipe dalvik
reboot to system.
To install recovery:
Download latest nut's xzdr installer zip
Put it somewhere in your computer
Extract it, you will get a folder of same name
Connect your phone to pc in USB debugging mode
Open the extracted folder
Double click the windows installer batch file
Grant superuser access on your phone's screen
Follow the instructions on terminal
(press 1 on your pc as you have SuperSU in your phone)
After successful instalation of recovery, your phone will reboot into recovery.
Reboot the phone into system
.
.
Now you have a rooted 5.1.1 D5322 with latest Dual recovery.
This is not even close to simple dude..
This is what i did to root :
1. Copy SuperSU to sdcard
2. Flash DUAL_RECOVERY_D5322-LP.img
3. Install supersu then power off
4. Open flashtool and Flash STOCK KERNEL 5.1.1 ONLY KERNEL
5. REBOOT & VIOLA
there are few additions required for noob like me
To make work this method
Requirement :
Rooted D5322 with 4.x.x or 5.0.1 & working recovery installed.
To install recovery:
make sure that you have :
Enabled USB debugging
Enabled Unknown sources
r2rdcroix said:
This is not even close to simple dude..
This is what i did to root :
1. Copy SuperSU to sdcard
2. Flash DUAL_RECOVERY_D5322-LP.img
3. Install supersu then power off
4. Open flashtool and Flash STOCK KERNEL 5.1.1 ONLY KERNEL
5. REBOOT & VIOLA
Click to expand...
Click to collapse
When you tick all the boxes in prf creator, kernel gets added.
Sent from my D5322 using XDA Forums Pro.
rrd84 said:
there are few additions required for noob like me
To make work this method
Requirement :
Rooted D5322 with 4.x.x or 5.0.1 & working recovery installed.
To install recovery:
make sure that you have :
Enabled USB debugging
Enabled Unknown sources
Click to expand...
Click to collapse
Yeah I already said it's a sequel to my first post. In which you would see how to root D5322 on 5.0.2, and ofcourse recovery is needed. Thanks.
Sent from my D5322 using XDA Forums Pro.
Good work. But we know that this is not really easy. hehe
dropdan said:
Good work. But we know that this is not really easy. hehe
Click to expand...
Click to collapse
yeah!
Does this root 5.1.1 by 100%? Can we install Modded Play Store by this root method?
Need step by Step instructions please
Hello
I am a novice with many of the tools listed & the steps outlined, can somebody please help with step by step instructions,
maybe email me [email protected]
:good:
Thanks. For my XPERIA T2 ULTRA DUAL I had to made a change:
Instead of using the Recovery-Software you (rituraj_singh) offered I had to use the software (TWRP) recommended b abcdjdj in his post from 27th May 2014 ((D5322) Dual Recovery) on the XDA-Forum.
For the not-experienced Users of Androxyde Xperia Flash Tool: You can use the XperiFirm-Software (XI-Button in the Flash-Tool) and install the 5.0.1 (19.3.A.0.472)-Firmware from MELA Latin, but you have to overwrite also the Userdata and the Apps-Log, otherwise there are problems. After flashing use KingRoot to root your device, than replace kinguser using the batch-script of w0lfdroid.com (May 2015) placing the mrw-folder (included in the downloaded zip) on the intern memory (important) and executing it with Terminal Emulator. Than open SuperSu (installed by the script, not by you), and actualize the root-script. Afterwards reboot.
A Tip: After having installed the TWRP-Software on your phone you could have problems rebooting into the system, so prepare all and after having flashed the custom prf-rom on the device all would be function!
A step-by-step-Version (summary)
sachin.sachania said:
Hello
I am a novice with many of the tools listed & the steps outlined, can somebody please help with step by step instructions,
maybe email me [email protected]
:good:
Click to expand...
Click to collapse
Here comes a step-by-step-Version (summary) of all the "Posts"s needed for rooting Lollipop 5.1.1 on your Sony Xperia T2 Ultra (Dual).
The copyright is by the "Post"-authors like rituraj_singh and abcdjdj (I took the links to the posts nearby the description of the step) and by w0lfdroid.com, xperiafirmware.com and the software-producers.
I only wanted to create a step-by-step-summary. There is no garantuee which garantuees success using the summery! No responsability dad it does not destroy your mobilephone. Use it at your own risk! Thank you to the original "owners" of the posts. I hope the summary is ok for them! Otherwise contact me.
Time: maybe 1 hour or 2 hours
Tipp: if you until yet did not install Android 5.1.1 on your Xperia T2 Ultra Dual you do not have to follow the steps which are describing how to download the older Firmware via XperiFirm, but you should have installed the FlashTool just for the drivers (You won't use it directly). You can use the steps describing how to root the older Firmware using KingRoot, than continue with step 7.
1) Install the Androxyde FlashTool on your Computer: http://www.flashtool.net/downloads.php or found on the XDA-Forum, install the ADB-Packages (ADB, ADB-Drivers) on your Computer and make the ADB-Command part of the "path"-Variable of your Computers Terminal (see Google)
2) Install XperiFirm (cause easy for beginners): open the FlashTool and click on the "XF-button" near the "plus-in-a-square"-button and the "flash"-button.
3) After having installed the XperiFirm-Tool open it and click on "Xperia T2 Ultra (tianchi)" and select "D5322/XM50H (dual)"
4) Than click on the "Check-All"-Button over the Line "Latest Release"
5) Click on "MENA Latin" in the "Market"-Line and than on the "19.3.A.0.472 / R3C" and download it (having activated "unpack automatically")
6) Go to "xperiafirmware.com/8-firmware/58-sony-xperia-t2-ultra-dual-d5322" and download it (see chapter "1." on the website ), but do not flash it
7) Download the newest PRF-Creator (ZIP) from the following XDA-Forum-Link and unzip it: http://forum.xda-developers.com/crossdevice-dev/sony/tool-prfcreator-easily-create-pre-t2859904
8) Download the newest SuperSU-ZIP from chainfire (https://download.chainfire.eu/696/SuperSU). and paste the ZIP in the unzipped PRF-Creator-folder: https://download.chainfire.eu/696/SuperSU
9) Now copy the .ftf-file (Firmware) downloaded from xperiafirmware.com also in the unzipped PRF-Creator-folder and open the PRF-Creator.exe
10) The PRF-Creator asks for the .TFT-File (select the one you downloaded from xperiafirmware.com) and for the SuperSU-ZIP-File (select the one downloaded from chainfire)
11) Select in the "Include"-field: "Kernel"; "FOTA-Kernel"; "Modem" and "LTALable", also "Sign ZIP" and "Legacy Mode"
12) Click create and wait until finished
13) Copy the created "flashable-prerooted.zip" from your unzipped PRF-Creator-Folder to the external SD-Card of your Device
14) BackUp your mobilephone using the "Sony PC Companion" or simular software like Wondershare's "MobileGo"
14a) Control if you have unlocked your Boatloader (normally it's locked) and if it's locked, go to the "Sony Mobile Developers Unlock Bootloader Website" and follow the instructions there Important: You could have to install ADB and Sony's ADB-Drivers (find ADB using google) and the Sony FlashTool "Emma" will not work with the Xperia T2 Ultra Dual
15) Shut down your phone and start it holding the "Volume-down"-Button while plugging in the USB-Cable (it won't show more than a black screen)
16) Close "XperiFirm", wait until it finished and then click on the "Flash"-Button and select in the new window "Flashmode" and "OK" (obviously)
17) Select the Firmware you downloaded before with XperiFirm (19.3.A.0.472) and select in the "Wipe"-Field: "APPS_LOG" and "USERDATA" (!!!important!!! otherwise problems)
18) Click on the "Flash"-Button and wait until it's done (sometimes the flashtool has problems with the files - dont worry: shutdown the FlashTool and retry it once more)
19) Unplug the mobilephone from the USB-Cable, start it and follow the instructions
20) After having prepared the mobilephone go to "kingroot.net/wap/download" and download KingRoot (sometime trouble with the site, try it once more)
21) Afterwards enable the DeveloperMode (settings - About Phone - click "build number" 7 times) and enable the "unknown sources" (settings - Security - unknown sources)
22) Install KingRoot and root your Xperia T2 Ultra Dual
23) Install "Terminal Emulator" from the Google Play-Appstore to your device and open it
24) Go to "http://www.w0lfdroid.com/2015/05/How-to-Remove-Replace-KingUser-KingRoot-with-SuperSU.html" and download the newest "Replace KingUser with SuperSU.zip" and unpack it to your device's intern memory (!!!important!!! otherwise no function)
25) In the Terminal Emulator App enter "su" for gaining "root"-access ("Enter" obviously), than enter "sh /sdcard/mrw/root.sh" and wait until it finish (it will open SuperSU)
26) Actualize the file as requested by SuperSU and, after having had success, reboot your mobilephone
27) Install a Root-Checker-App from Google Play Store and control, if you see a window from "SuperSU", otherwise repeat the last steps
28) Go to "https://goo.gl/lg6I2t" or visit directly the XDA-Forum-Post of abcdjdj (http://forum.xda-developers.com/showthread.php?t=2764408) and download his "TWRP-KK-T2_DUAL-V3.img" or newer
29) Shut down your mobilephone. Afterwards hold the "Volume-Up"-Button while plugging in the USB-Cable (it shows only a black screen) and connect it to the Computer
30) Check if you have installed all fastboot drivers for your device, then open the "Command Line" of your Computer "as Administrator" and enter: "fastboot flash boot (path-to-the-file-downloaded-in-the-last-step)/TWRP-KK-T2_DUAL-V3.img" and click obviously "Enter"
31) Now unplug your mobilephone, than hold the "Volume-down"-Button and the "Power"-Button at the same time: TWRP-Recovery will start
32) Select "Wipe", than "Advanced Wipe", than select "intern. memory", "dalvik", "cache", "data" and "system"
33) Swipe to Wipe
34) Go to TWRP's home (twice times the "back"-Button) and select "Install", than "external SD-Card" and select "flashable-prerooted.zip" and confirm the warning, than SWIPE to INSTALL (flashing)
35) Wipe the Dalvik-Cache
36) Reboot into System and follow your mobilephone's instructions
37) Install a Root Checker App from Google Play Store and control if it's rooted, afterwards install the backup of your mobilephone made at the beginning
38) Install "Titanium Backup" and disinstall (after having done a backup of the app you want to delete) Apps you do not want
39) Install "Link-to-SD" from GooglePlay, prepare your external SD-Card with a partition manager (using your Computer) and copy all possible apps completly to the SD-Card
This works on T2 ULTRA D5306 Single SIM
theokon said:
Here comes a step-by-step-Version (summary) of all the "Posts"s needed for rooting Lollipop 5.1.1 on your Sony Xperia T2 Ultra (Dual).
Click to expand...
Click to collapse
Well my friend, first at all, this is a awsome guide, it really help me to load the 5.1.1 on my SP. I Must said that even if this looks
overwhelming at the begining, it's pretty easy to do it.
Just for the FeedBack, this method works in:
T2 Ultra D5306 Single SIM, TELCEL.
I use the US CUSTOM Stock ROM 5.1.1 ( 19.4.A.0.182 ), if ask for the FTF, look at the FTF MEGAPOST.
Thanks to @rituraj_singh for find this method and @theokon to make the Easy-Mode Guide.
This thread must being Sticky.
PS: You have to add one step: When you reboot after the Flash, it can take a while in start the smartphone, It is to prevent panic if they see it takes a lot time to start, they might think it is bricked and try to restart it. :good:
This works great for rooting the phone (D5322) but for me link2sd doesn't read the 2nd partition and keeps giving me unable to mount errors.
virgilone2 said:
This works great for rooting the phone (D5322) but for me link2sd doesn't read the 2nd partition and keeps giving me unable to mount errors.
Click to expand...
Click to collapse
You got the error when you try to mount on /dev/block/mmcblk1p2 ? it and said that the mount fail?
I had that error as well, maybe you have to try this @virgilone2:
1.- Uninstall the Link2SD.
2.- Install the SD MAID and run it, clean it up.
3.- Reinstall the Link2SD.
4.- Install the Recovery (I use this) [ XZDualRecovery 2.8.21 ] or the same you use in the guide.
5.- Run the Recovery, and go to Wipe > Advance Wipe > Davik Cache, Swipe to Wipe, after it ends go to Reboot > System.
6.- Before your smartphone start as usual, going to pop one little window with a counter, wait to end (Maybe take a while).
7.-Run you Link2SD, it have to Mount the ext2 partition and ask for reboot, if isnt the case, just recreate the mount script.
8.- Enjoy your Link2SD in Lollipop 5.1.1 :good:
This works for me, i hope works for you as well
Windows 10 Driver Problems
When having updated to Windows 10 driver problems could happen.
When entering "fastboot devices" in your computer's terminal and nothinh happens it is like this.
You can solve this easily:
1) Plug in your phone in fastboot mode into the computer (Volume Up + Plug-In of the USB-cable)
2) Go to the"Devices manager" (or called simular, as I don't know how to translate it correctly), where you will find the unknown S1 fastboot driver.
3) Download the official Sony flashing tool "EMMA" and reinstall the "Android Studio" in order to get the correct drivers
4) For security download also the "Universal ADB Drivers Package" from chip.de and install it
5) Back in the Device Manager reinstall the correct driver selecting it from the drivers list (!): Sony SA0110 - ADB Interface driver
rituraj_singh said:
My this post may be considered as a sequel to my previous post about the easiest way to root t2 ultra dual {.472} {5.0.2}
Now the way to root our t2 ultra dual {5.1.1} {.182}:
Download the ftf file of latest firmware 19.4.A.0.182 (search on google)
Download latest version or V 0.8 of prf creator (search on google and get xda link)
Download SuperSU.zip (search on google)
Now put the prf creator somewhere in your PC (let's say on desktop) extract it there.
Add ftf file and superSU.zip in prf creator
Mark all the boxes on right side of prf creator window
Hit create. In 15-20 minutes you will get a zip file named "flashable" in prf folder
Copy this flashable zip and put it in root of SD card of your phone.
Now reboot your phone in recovery
after rebooting into recovery, follow in sequence:
Wipe
Advanced wipe
select:
cache
dalvik
system
data
internal memory
swipe to wipe
go back to recovery home
tap install
select external sd card
select that flashable zip
swipe to flash
wipe dalvik
reboot to system.
To install recovery:
Download latest nut's xzdr installer zip
Put it somewhere in your computer
Extract it, you will get a folder of same name
Connect your phone to pc in USB debugging mode
Open the extracted folder
Double click the windows installer batch file
Grant superuser access on your phone's screen
Follow the instructions on terminal
(press 1 on your pc as you have SuperSU in your phone)
After successful instalation of recovery, your phone will reboot into recovery.
Reboot the phone into system
.
.
Now you have a rooted 5.1.1 D5322 with latest Dual recovery.
Click to expand...
Click to collapse
worat guide i ever seen in xda !!
no links !!
manojkumar8552 said:
worat guide i ever seen in xda !!
no links !!
Click to expand...
Click to collapse
Well thanks!! Links needed to perform the steps suggested are everywhere in the realm of Internet. Uploading same thing again and again is waste of space,data and everything. Hope you understand.
Ftf can be downloaded through xperi-firm and recovery can be downloaded from nut's Xperia files website. SuperSU is already available in more than 1000 places on Internet. And prf creator is created by a certain developer which is already available on xda. So reposting his item might be considered as kinda theft/plagiarism. And this is already mentioned in this post that it's a sequel of previous post. So please do your own bit of work/home work before posting negative comments.
Sent from my D5322 using XDA Forums Pro.
I did My HW. and that Why i m Saying You.
My one Frnd dont get anything from this Thread.
He is just trying to ROot.And says what the hell is going on thRead.
People Are Not Expert That You Are.
so make little comfortable Thread plz.
Sent from my Moto G 2014 using Tapatalk
manojkumar8552 said:
I did My HW. and that Why i m Saying You.
My one Frnd dont get anything from this Thread.
He is just trying to ROot.And says what the hell is going on thRead.
People Are Not Expert That You Are.
so make little comfortable Thread plz.
Sent from my Moto G 2014 using Tapatalk
Click to expand...
Click to collapse
This post is a sequel of previous post. To perform the steps mentioned you need to be on earlier versions of Android. Like 5.0.2 or earlier. And recovery must be installed in that. If you're on 5.0.2 follow my post about how to root on 5.0.2.
Sent from my D5322 using XDA Forums Pro.
manojkumar8552 said:
I did My HW. and that Why i m Saying You.
My one Frnd dont get anything from this Thread.
He is just trying to ROot.And says what the hell is going on thRead.
People Are Not Expert That You Are.
so make little comfortable Thread plz.
Sent from my Moto G 2014 using Tapatalk
Click to expand...
Click to collapse
Well.. You can use KingRoot v 4.5.2*to root 5.1.1 and for SuperSU follow my previous post.
Sent from my D5322 using XDA Forums Pro.
Oreo Root For The S7/S7E (Will work on Rev4-Rev10/A Bootloader) Adb Install
A big thanks goes out to @klabit87 he is 99 percent the reason we have root! Also @stang5litre and stang5litre test group.Prefered Root Method Oreo Only Using Odin Only For Rev-4 Too Rev10/A
Odin Install Root Method For S7 Flat Can Be Found Here
Odin Install Root Method For S7 Edge Can Be Found Here
Root Method Using Odin Only For Rev-11/B -- Please Read Limitations On The Thread
Rev11/B Root Method For S7 Flat Can Be Found Here
Rev11/B Root Method For S7 Edge Can Be Found Here
ADB Method Oreo Or Nougat For Rev-4 Too Rev10/A -- Must Use Adb Method For Nougat Root
2023_S7_Flat_Edge _ADB_Root_Plus_Safestrap_V1.7z
Directions:
This works for Oreo Rev4-Rev10/A Bootloader Roms or Nougat Rev4
As always there is a chance of bricking your phone
1. Download and extract 2022_S7_Edge_ADB_Root_Plus_Safestrap.7z
2. Reboot your phone to download mode
3. Inside the 2022_S7_Edge_ADB_Root_Plus_Safestrap.7z folder you will find an Odin_Firmware folder. Use Odin and flash the Eng Boot Image for your phone
4. Once phone is rebooted and connected to computer click on the cmd-here.exe and type Install_One_Click.cmd in the command window and hit enter
5. Once root is done and root bat closes your phone will reboot too stock recovery where you must wipe data
6. Once booted click on SuperSu app and update su binary if app ask then reboot
7. Don't flash any superuser zips in recovery that are not made by me or use any other SuperSu apk
Rebooting Too Safestrap Recovery
1. Reboot phone as you would too boot stock recovery Pwr + VolUp + Home. It takes up too 40 seconds too boot recovery. Ignore the mount system errors on info screen
2. Enter recovery.
3. Too leave just reboot system ignore no system installed message if you get it
4. There is screen lag issues on scrolling in recovery. There is aroma file manager that takes care of this issue while in recovery but selecting zips too install may present a problem for this you can use the kernel manager recovery flash option while phone is booted too system. Simply select zip too flash and phone will reboot too recovery and flash it and reboot back too system. Most other function in recovery should work the issue is just scrolling too select files.
5. Flashfire is installed as an alternative as well
Features:
1. SuperSu Root- Do not use any other SuperSu app. Its ok to update su binary if app ask.
2. Safetrap recovery-Still working out scrolling issue
3. Flashfire
4. Kernel tweaks CPU governor set too Conservative
5. Entropy/Swapiness set to High
6. Build Prop tweaks to combat lag
7. Bloat removed from rom
8. Knox removed from rom
Bugs:
Eng Boot Image causes lag
Safestrap Recovery has scrolling issues
Random Reboots will most likely happen
Safetynet will not pass
Battery life may not be optimal
SuperSu cannot be updated
Flashfire may need date changed too 2016 to function if it just keeps closing on you
Volte And Hotspot Fix
View attachment 4555265
Old Downloads
S7_Oreo_Nougat_Adb_Advanced_Root_V12.zip Recommended Root Zip
This zip gives you the option to install some cpu tweaks and will also. Install the entropy tweak that the SEFix app does. The tweak sets entropy to high by default I also include the SEFix app if you want to change the settings. I also set the swappiness settings to very high. If you want to change these settings you can download the speedup swap app from playstore. The above zip also removes knox and changes the fstab.qcom file to disable dm-verity on system files and remove all file encryption which makes it seem to work better and make it compatible with my no root roms that has to have this done to allow safestrap to work. Installing the above zip requires a data wipe unless you have already installed it or you are coming from my non rooted roms
S7_Oreo_Su_Binary_Only_ADB_Root.zip Alternative Root Zip
This root zip is only for oreo an only installs the su binary to the system/xbin folder giving you root privelages it has no tweaks and does not change the fstab.qcomn file to remove dm-verity and system file encryption. There is no SuperSU app installed either but you will have root privelages.
Credits:
- @Raymonf for modified odin
- @afaneh92 for safestrap
- @me2151 for help and finding alternative flash methods
- @tytydraco for some instructions
- @mweinbach for some instructions
- @Craz Basics for help
- @partcyborg for help and guides other devices root methods
- @elliwigy for being great help when I need it
- @stang5litre
- @jds3118
- @Krog18
If I missed you please pm me
Donations
If you would like to donate please send all donations to @klabit87 PayPal Link Here and give a thanks!
Main Root thread with all discussion is found here
[2022 Root For S7/S7Edge Oreo Rev4_To_Rev10/A_Odin Flashable Or ADB Method] Plus [Limited Root Method Rev11/B _Using Combo_Firmware]
Oreo Root For The S7/S7E (Will work on Rev4-Rev10/A Bootloader) Adb Install A big thanks goes out to @klabit87 he is 99 percent the reason we have root! Also @stang5litre and stang5litre test group. Prefered Root Method Oreo Only Using Odin...
forum.xda-developers.com