My this post may be considered as a sequel to my previous post about the easiest way to root t2 ultra dual {.472} {5.0.2}
Now the way to root our t2 ultra dual {5.1.1} {.182}:
Download the ftf file of latest firmware 19.4.A.0.182 (search on google)
Download latest version or V 0.8 of prf creator (search on google and get xda link)
Download SuperSU.zip (search on google)
Now put the prf creator somewhere in your PC (let's say on desktop) extract it there.
Add ftf file and superSU.zip in prf creator
Mark all the boxes on right side of prf creator window
Hit create. In 15-20 minutes you will get a zip file named "flashable" in prf folder
Copy this flashable zip and put it in root of SD card of your phone.
Now reboot your phone in recovery
after rebooting into recovery, follow in sequence:
Wipe
Advanced wipe
select:
cache
dalvik
system
data
internal memory
swipe to wipe
go back to recovery home
tap install
select external sd card
select that flashable zip
swipe to flash
wipe dalvik
reboot to system.
To install recovery:
Download latest nut's xzdr installer zip
Put it somewhere in your computer
Extract it, you will get a folder of same name
Connect your phone to pc in USB debugging mode
Open the extracted folder
Double click the windows installer batch file
Grant superuser access on your phone's screen
Follow the instructions on terminal
(press 1 on your pc as you have SuperSU in your phone)
After successful instalation of recovery, your phone will reboot into recovery.
Reboot the phone into system
.
.
Now you have a rooted 5.1.1 D5322 with latest Dual recovery.
This is not even close to simple dude..
This is what i did to root :
1. Copy SuperSU to sdcard
2. Flash DUAL_RECOVERY_D5322-LP.img
3. Install supersu then power off
4. Open flashtool and Flash STOCK KERNEL 5.1.1 ONLY KERNEL
5. REBOOT & VIOLA
there are few additions required for noob like me
To make work this method
Requirement :
Rooted D5322 with 4.x.x or 5.0.1 & working recovery installed.
To install recovery:
make sure that you have :
Enabled USB debugging
Enabled Unknown sources
r2rdcroix said:
This is not even close to simple dude..
This is what i did to root :
1. Copy SuperSU to sdcard
2. Flash DUAL_RECOVERY_D5322-LP.img
3. Install supersu then power off
4. Open flashtool and Flash STOCK KERNEL 5.1.1 ONLY KERNEL
5. REBOOT & VIOLA
Click to expand...
Click to collapse
When you tick all the boxes in prf creator, kernel gets added.
Sent from my D5322 using XDA Forums Pro.
rrd84 said:
there are few additions required for noob like me
To make work this method
Requirement :
Rooted D5322 with 4.x.x or 5.0.1 & working recovery installed.
To install recovery:
make sure that you have :
Enabled USB debugging
Enabled Unknown sources
Click to expand...
Click to collapse
Yeah I already said it's a sequel to my first post. In which you would see how to root D5322 on 5.0.2, and ofcourse recovery is needed. Thanks.
Sent from my D5322 using XDA Forums Pro.
Good work. But we know that this is not really easy. hehe
dropdan said:
Good work. But we know that this is not really easy. hehe
Click to expand...
Click to collapse
yeah!
Does this root 5.1.1 by 100%? Can we install Modded Play Store by this root method?
Need step by Step instructions please
Hello
I am a novice with many of the tools listed & the steps outlined, can somebody please help with step by step instructions,
maybe email me [email protected]
:good:
Thanks. For my XPERIA T2 ULTRA DUAL I had to made a change:
Instead of using the Recovery-Software you (rituraj_singh) offered I had to use the software (TWRP) recommended b abcdjdj in his post from 27th May 2014 ((D5322) Dual Recovery) on the XDA-Forum.
For the not-experienced Users of Androxyde Xperia Flash Tool: You can use the XperiFirm-Software (XI-Button in the Flash-Tool) and install the 5.0.1 (19.3.A.0.472)-Firmware from MELA Latin, but you have to overwrite also the Userdata and the Apps-Log, otherwise there are problems. After flashing use KingRoot to root your device, than replace kinguser using the batch-script of w0lfdroid.com (May 2015) placing the mrw-folder (included in the downloaded zip) on the intern memory (important) and executing it with Terminal Emulator. Than open SuperSu (installed by the script, not by you), and actualize the root-script. Afterwards reboot.
A Tip: After having installed the TWRP-Software on your phone you could have problems rebooting into the system, so prepare all and after having flashed the custom prf-rom on the device all would be function!
A step-by-step-Version (summary)
sachin.sachania said:
Hello
I am a novice with many of the tools listed & the steps outlined, can somebody please help with step by step instructions,
maybe email me [email protected]
:good:
Click to expand...
Click to collapse
Here comes a step-by-step-Version (summary) of all the "Posts"s needed for rooting Lollipop 5.1.1 on your Sony Xperia T2 Ultra (Dual).
The copyright is by the "Post"-authors like rituraj_singh and abcdjdj (I took the links to the posts nearby the description of the step) and by w0lfdroid.com, xperiafirmware.com and the software-producers.
I only wanted to create a step-by-step-summary. There is no garantuee which garantuees success using the summery! No responsability dad it does not destroy your mobilephone. Use it at your own risk! Thank you to the original "owners" of the posts. I hope the summary is ok for them! Otherwise contact me.
Time: maybe 1 hour or 2 hours
Tipp: if you until yet did not install Android 5.1.1 on your Xperia T2 Ultra Dual you do not have to follow the steps which are describing how to download the older Firmware via XperiFirm, but you should have installed the FlashTool just for the drivers (You won't use it directly). You can use the steps describing how to root the older Firmware using KingRoot, than continue with step 7.
1) Install the Androxyde FlashTool on your Computer: http://www.flashtool.net/downloads.php or found on the XDA-Forum, install the ADB-Packages (ADB, ADB-Drivers) on your Computer and make the ADB-Command part of the "path"-Variable of your Computers Terminal (see Google)
2) Install XperiFirm (cause easy for beginners): open the FlashTool and click on the "XF-button" near the "plus-in-a-square"-button and the "flash"-button.
3) After having installed the XperiFirm-Tool open it and click on "Xperia T2 Ultra (tianchi)" and select "D5322/XM50H (dual)"
4) Than click on the "Check-All"-Button over the Line "Latest Release"
5) Click on "MENA Latin" in the "Market"-Line and than on the "19.3.A.0.472 / R3C" and download it (having activated "unpack automatically")
6) Go to "xperiafirmware.com/8-firmware/58-sony-xperia-t2-ultra-dual-d5322" and download it (see chapter "1." on the website ), but do not flash it
7) Download the newest PRF-Creator (ZIP) from the following XDA-Forum-Link and unzip it: http://forum.xda-developers.com/crossdevice-dev/sony/tool-prfcreator-easily-create-pre-t2859904
8) Download the newest SuperSU-ZIP from chainfire (https://download.chainfire.eu/696/SuperSU). and paste the ZIP in the unzipped PRF-Creator-folder: https://download.chainfire.eu/696/SuperSU
9) Now copy the .ftf-file (Firmware) downloaded from xperiafirmware.com also in the unzipped PRF-Creator-folder and open the PRF-Creator.exe
10) The PRF-Creator asks for the .TFT-File (select the one you downloaded from xperiafirmware.com) and for the SuperSU-ZIP-File (select the one downloaded from chainfire)
11) Select in the "Include"-field: "Kernel"; "FOTA-Kernel"; "Modem" and "LTALable", also "Sign ZIP" and "Legacy Mode"
12) Click create and wait until finished
13) Copy the created "flashable-prerooted.zip" from your unzipped PRF-Creator-Folder to the external SD-Card of your Device
14) BackUp your mobilephone using the "Sony PC Companion" or simular software like Wondershare's "MobileGo"
14a) Control if you have unlocked your Boatloader (normally it's locked) and if it's locked, go to the "Sony Mobile Developers Unlock Bootloader Website" and follow the instructions there Important: You could have to install ADB and Sony's ADB-Drivers (find ADB using google) and the Sony FlashTool "Emma" will not work with the Xperia T2 Ultra Dual
15) Shut down your phone and start it holding the "Volume-down"-Button while plugging in the USB-Cable (it won't show more than a black screen)
16) Close "XperiFirm", wait until it finished and then click on the "Flash"-Button and select in the new window "Flashmode" and "OK" (obviously)
17) Select the Firmware you downloaded before with XperiFirm (19.3.A.0.472) and select in the "Wipe"-Field: "APPS_LOG" and "USERDATA" (!!!important!!! otherwise problems)
18) Click on the "Flash"-Button and wait until it's done (sometimes the flashtool has problems with the files - dont worry: shutdown the FlashTool and retry it once more)
19) Unplug the mobilephone from the USB-Cable, start it and follow the instructions
20) After having prepared the mobilephone go to "kingroot.net/wap/download" and download KingRoot (sometime trouble with the site, try it once more)
21) Afterwards enable the DeveloperMode (settings - About Phone - click "build number" 7 times) and enable the "unknown sources" (settings - Security - unknown sources)
22) Install KingRoot and root your Xperia T2 Ultra Dual
23) Install "Terminal Emulator" from the Google Play-Appstore to your device and open it
24) Go to "http://www.w0lfdroid.com/2015/05/How-to-Remove-Replace-KingUser-KingRoot-with-SuperSU.html" and download the newest "Replace KingUser with SuperSU.zip" and unpack it to your device's intern memory (!!!important!!! otherwise no function)
25) In the Terminal Emulator App enter "su" for gaining "root"-access ("Enter" obviously), than enter "sh /sdcard/mrw/root.sh" and wait until it finish (it will open SuperSU)
26) Actualize the file as requested by SuperSU and, after having had success, reboot your mobilephone
27) Install a Root-Checker-App from Google Play Store and control, if you see a window from "SuperSU", otherwise repeat the last steps
28) Go to "https://goo.gl/lg6I2t" or visit directly the XDA-Forum-Post of abcdjdj (http://forum.xda-developers.com/showthread.php?t=2764408) and download his "TWRP-KK-T2_DUAL-V3.img" or newer
29) Shut down your mobilephone. Afterwards hold the "Volume-Up"-Button while plugging in the USB-Cable (it shows only a black screen) and connect it to the Computer
30) Check if you have installed all fastboot drivers for your device, then open the "Command Line" of your Computer "as Administrator" and enter: "fastboot flash boot (path-to-the-file-downloaded-in-the-last-step)/TWRP-KK-T2_DUAL-V3.img" and click obviously "Enter"
31) Now unplug your mobilephone, than hold the "Volume-down"-Button and the "Power"-Button at the same time: TWRP-Recovery will start
32) Select "Wipe", than "Advanced Wipe", than select "intern. memory", "dalvik", "cache", "data" and "system"
33) Swipe to Wipe
34) Go to TWRP's home (twice times the "back"-Button) and select "Install", than "external SD-Card" and select "flashable-prerooted.zip" and confirm the warning, than SWIPE to INSTALL (flashing)
35) Wipe the Dalvik-Cache
36) Reboot into System and follow your mobilephone's instructions
37) Install a Root Checker App from Google Play Store and control if it's rooted, afterwards install the backup of your mobilephone made at the beginning
38) Install "Titanium Backup" and disinstall (after having done a backup of the app you want to delete) Apps you do not want
39) Install "Link-to-SD" from GooglePlay, prepare your external SD-Card with a partition manager (using your Computer) and copy all possible apps completly to the SD-Card
This works on T2 ULTRA D5306 Single SIM
theokon said:
Here comes a step-by-step-Version (summary) of all the "Posts"s needed for rooting Lollipop 5.1.1 on your Sony Xperia T2 Ultra (Dual).
Click to expand...
Click to collapse
Well my friend, first at all, this is a awsome guide, it really help me to load the 5.1.1 on my SP. I Must said that even if this looks
overwhelming at the begining, it's pretty easy to do it.
Just for the FeedBack, this method works in:
T2 Ultra D5306 Single SIM, TELCEL.
I use the US CUSTOM Stock ROM 5.1.1 ( 19.4.A.0.182 ), if ask for the FTF, look at the FTF MEGAPOST.
Thanks to @rituraj_singh for find this method and @theokon to make the Easy-Mode Guide.
This thread must being Sticky.
PS: You have to add one step: When you reboot after the Flash, it can take a while in start the smartphone, It is to prevent panic if they see it takes a lot time to start, they might think it is bricked and try to restart it. :good:
This works great for rooting the phone (D5322) but for me link2sd doesn't read the 2nd partition and keeps giving me unable to mount errors.
virgilone2 said:
This works great for rooting the phone (D5322) but for me link2sd doesn't read the 2nd partition and keeps giving me unable to mount errors.
Click to expand...
Click to collapse
You got the error when you try to mount on /dev/block/mmcblk1p2 ? it and said that the mount fail?
I had that error as well, maybe you have to try this @virgilone2:
1.- Uninstall the Link2SD.
2.- Install the SD MAID and run it, clean it up.
3.- Reinstall the Link2SD.
4.- Install the Recovery (I use this) [ XZDualRecovery 2.8.21 ] or the same you use in the guide.
5.- Run the Recovery, and go to Wipe > Advance Wipe > Davik Cache, Swipe to Wipe, after it ends go to Reboot > System.
6.- Before your smartphone start as usual, going to pop one little window with a counter, wait to end (Maybe take a while).
7.-Run you Link2SD, it have to Mount the ext2 partition and ask for reboot, if isnt the case, just recreate the mount script.
8.- Enjoy your Link2SD in Lollipop 5.1.1 :good:
This works for me, i hope works for you as well
Windows 10 Driver Problems
When having updated to Windows 10 driver problems could happen.
When entering "fastboot devices" in your computer's terminal and nothinh happens it is like this.
You can solve this easily:
1) Plug in your phone in fastboot mode into the computer (Volume Up + Plug-In of the USB-cable)
2) Go to the"Devices manager" (or called simular, as I don't know how to translate it correctly), where you will find the unknown S1 fastboot driver.
3) Download the official Sony flashing tool "EMMA" and reinstall the "Android Studio" in order to get the correct drivers
4) For security download also the "Universal ADB Drivers Package" from chip.de and install it
5) Back in the Device Manager reinstall the correct driver selecting it from the drivers list (!): Sony SA0110 - ADB Interface driver
rituraj_singh said:
My this post may be considered as a sequel to my previous post about the easiest way to root t2 ultra dual {.472} {5.0.2}
Now the way to root our t2 ultra dual {5.1.1} {.182}:
Download the ftf file of latest firmware 19.4.A.0.182 (search on google)
Download latest version or V 0.8 of prf creator (search on google and get xda link)
Download SuperSU.zip (search on google)
Now put the prf creator somewhere in your PC (let's say on desktop) extract it there.
Add ftf file and superSU.zip in prf creator
Mark all the boxes on right side of prf creator window
Hit create. In 15-20 minutes you will get a zip file named "flashable" in prf folder
Copy this flashable zip and put it in root of SD card of your phone.
Now reboot your phone in recovery
after rebooting into recovery, follow in sequence:
Wipe
Advanced wipe
select:
cache
dalvik
system
data
internal memory
swipe to wipe
go back to recovery home
tap install
select external sd card
select that flashable zip
swipe to flash
wipe dalvik
reboot to system.
To install recovery:
Download latest nut's xzdr installer zip
Put it somewhere in your computer
Extract it, you will get a folder of same name
Connect your phone to pc in USB debugging mode
Open the extracted folder
Double click the windows installer batch file
Grant superuser access on your phone's screen
Follow the instructions on terminal
(press 1 on your pc as you have SuperSU in your phone)
After successful instalation of recovery, your phone will reboot into recovery.
Reboot the phone into system
.
.
Now you have a rooted 5.1.1 D5322 with latest Dual recovery.
Click to expand...
Click to collapse
worat guide i ever seen in xda !!
no links !!
manojkumar8552 said:
worat guide i ever seen in xda !!
no links !!
Click to expand...
Click to collapse
Well thanks!! Links needed to perform the steps suggested are everywhere in the realm of Internet. Uploading same thing again and again is waste of space,data and everything. Hope you understand.
Ftf can be downloaded through xperi-firm and recovery can be downloaded from nut's Xperia files website. SuperSU is already available in more than 1000 places on Internet. And prf creator is created by a certain developer which is already available on xda. So reposting his item might be considered as kinda theft/plagiarism. And this is already mentioned in this post that it's a sequel of previous post. So please do your own bit of work/home work before posting negative comments.
Sent from my D5322 using XDA Forums Pro.
I did My HW. and that Why i m Saying You.
My one Frnd dont get anything from this Thread.
He is just trying to ROot.And says what the hell is going on thRead.
People Are Not Expert That You Are.
so make little comfortable Thread plz.
Sent from my Moto G 2014 using Tapatalk
manojkumar8552 said:
I did My HW. and that Why i m Saying You.
My one Frnd dont get anything from this Thread.
He is just trying to ROot.And says what the hell is going on thRead.
People Are Not Expert That You Are.
so make little comfortable Thread plz.
Sent from my Moto G 2014 using Tapatalk
Click to expand...
Click to collapse
This post is a sequel of previous post. To perform the steps mentioned you need to be on earlier versions of Android. Like 5.0.2 or earlier. And recovery must be installed in that. If you're on 5.0.2 follow my post about how to root on 5.0.2.
Sent from my D5322 using XDA Forums Pro.
manojkumar8552 said:
I did My HW. and that Why i m Saying You.
My one Frnd dont get anything from this Thread.
He is just trying to ROot.And says what the hell is going on thRead.
People Are Not Expert That You Are.
so make little comfortable Thread plz.
Sent from my Moto G 2014 using Tapatalk
Click to expand...
Click to collapse
Well.. You can use KingRoot v 4.5.2*to root 5.1.1 and for SuperSU follow my previous post.
Sent from my D5322 using XDA Forums Pro.
Related
This is my first work on xda, I created a tool that can make lots of thing with just a click !
Download Links
Linux
Windows
WARNING!!!
I'm not responsible if you brick your device!!! Do at your own risk!!!
Bootloader Unlocker and Root Tool will VOIDS YOUR WARRANTY!!!
Click to expand...
Click to collapse
Feel free to buy me a coffee, it will be appreciated , click the donate button over there (coffee) http://forum.xda-developers.com/donatetome.php?u=4169130
XDA portal link
Here it is : http://www.xda-developers.com/android/all-in-one-tool-for-motorola-xoom-brings-dual-recovery/
Thanks for the help
How to use
Windows --> Download the ZIP from here: http://sourceforge.net/projects/laiot/files/LAIOT.zip/download. Extract it in any folder you want. Then read the README_FIRST.txt file, it contains further information about what you need to do! Here's the content if you prefer reading in your browser:
PLEASE RUN (as administrator) The "Set_Up.bat" First To make sure all dll's and files are distributed where they need to be in order to launch LAIOTools
The reason for this is because this utility does not require the Android SDK to run and has "several key files" that need to be added to multiple directories within LAIOTools for certain Utilities, commands, and features to work properly! This was setup like this to avoid having to manually copy and past the files as well as to keep the download of this utility as light as possible...
Once Set_Up.bat has completed you will see LordAIOTool.bat in the LAIOT root directory. To use the utility, just double click the LordAIOTools.bat to begin...
(Note: There is a version 2 of the same file slightly modified, that file is mainly the same with a slight difference, it does not check to make sure necessary files are installed in the Tools directory for use with this utility - so please do not start with the LordAIOTool2.bat file. It's purpose is used throughout the utility for navigation purposes as a way to bypass the initial file check in the main LordAIOTool.bat file to keep things moving once you have launched the utility.) ..no harm should come if you accidentally used the 2.bat just that some commands may fail while trying to use it!
If you need to install the Motorola Device drivers install the appropriate windows version 32 bit or 64 bit depending on your system, they are located in the folder labeled Moto_Drivers
Click to expand...
Click to collapse
Linux --> Extract on your ~/ (If you didn't understand - /home/youruserhere), open LAIOT folder, double click "RunThisOnce.sh" select run in terminal, now it's installed, to run it, open a terminal and write LAIOT, it's opened! Please report here the bugs! The Linux version link is here https://downloads.sourceforge.net/project/laiot/LAIOT.tar.gz?r=&ts=1335123218&use_mirror=master , everything from Windows version is included except Boot in Ubuntu, but I will add later, sorry for the long wait for the new update, but it's here!
Click to expand...
Click to collapse
Features
1.Complete Backup Tool
2.Bootloader Unlocker Tool
3.Bootloader Locker Tool
4.Install Recovery
5.Restore Tool
6.Root Tool
7.Unroot Tool
8.App Install
9.Unbrick Xoom Tool
10.Dual Recovery Tool (Only on Linux version)
11.Ubuntu Boot (Based here Thank him as well!!!)
12.ROM Install (Under Development)
13.Stock Install
Click to expand...
Click to collapse
To use Unroot Tool on Xoom and Unbrick Xoom Tool download the official image (for your device) from the following link :
http://developer.motorola.com/products/software/
Click to expand...
Click to collapse
History/Changelog
1st posted as a tool that can backup /sdcard/Android and /sdcard/Gameloft folders on Motorola Xoom, then added Bootloader Unlocker and Root, then added more features
Beta 1
First Release
No script yet
Beta 2
Added a script on zip that can backup your data and unlock bootloader
Fixed Bootloader Unlocker Tool Bug and added some new options
Beta 3
Added root option
Fixed some more bugs
Put some more things and better writing
Beta 4
Added option to Lock Bootloader
Fixed some words wrong
Tried to fix some bugs
Beta 5
Added App Install feature
Added Check Root Feature
Fixed some gramatic errors
Fixed some bugs in Bootloader Unlocker
Fixed some bugs in Root
Fixed some bugs on Lock Bootloader
Beta 6
Renamed to Lord AIO Tool (on Script)
Added new Root option (Super One Click for some devices)
Added DooMLoRD root (For Xperia 2011 devices)
Fixed "Install app" bug
Fixed "Restore folders" bug
Added more compatibility
Fixed more bugs
Arranged better the folder
Beta 7
Added User Data Backup
Improved Backup Tool
Improved Restore Tool
Created an User Data Restore Tool
Moved to Development section
Beta 7.1
Just fixed some minor errors... Sorry didn't notice them
Beta 8
Added Unroot option
Fixed some other minor errors that I didn't notice
Beta 9
Added Unbrick Xoom Feature (Testers needed)
Organized better the folder of the tool (sorry still need to extract on C:/)
Beta 10
Added to X10 Mini Pro forum
Added X10 Mini/Pro and X8 Bootloader Unlocker
Beta 11
Added Dual Recovery Xoom (still developing, not working for now ) (Maybe until Wednesday it's done )
Added X10 Mini/Pro CWM Install
Fixed some problems when trying to use some tools
Beta 11.1
Testing phase of Dual Recovery on Xoom!!!
Reuploaded, must work now
Fixed some minor things...
Beta 12
Fixed some bugs
Really added CWM Install option (working fine)
Messed up with dual recovery... NOT WORKING FOR NOW! DO NOT TRY USING IT!!!
Beta 13
Added Ubuntu Boot
Fixed some things...
Added VNC Install
Added Ubuntu Download
Version 1
Linux Version is out!
Dual-Recovery on Linux version!
Started ROM Install development!
Stock Install on Linux version!
Version 2
Fixed little bug on Dual-Recovery.sh and LordAIOTool.sh scripts
Added BacktrackInstall/Uninstall/Boot script
Started new project... First two scripts are on update, now back to work
Version 2.1
Big Windows Update!
No changes in Linux yet, next version may come with Linux update
Code completely rewritten
Tools description clearer
Better Start-up check
Many thanks to @sidgrafix, my dear friend, who made this Windows update possible.
Click to expand...
Click to collapse
Warning regarding last update!
There are some untested features! Also there are some tools missing! A FAQ was added to the code, and it will be created with users information!
Thanks.
My Special Thanks to:
BPaul (paul-xxx) ---> He was my inspiration since I started thinking about developing... He is my favorite developer ever!
zone23 ---> For helping me when I needed some help
solarnz ---> For making the CWM and root I used here for Xoom
DoomLoRD --->For making the root option I used here for Xperia 2011 devices
shortfuse --->For creating the SuperOneClick I used here too
unrandomsam --->For giving me the idea to backup userdata
My Dad --->For helping me in fixing some problems
unchainedrssr --->For giving Dual Recovery tip
D4 --->For porting CWM to x10 mini pro
tehgeekguy --->For giving me some files
zacthespack --->For modding ubuntu.img to Xoom and creating the ubuntu.sh
faiyyaz --->For fixing a little thing on Ubuntu Script
Backtrack --->For making this amazing Distro and arm compatible!
sidgrafix ---> For rewriting the whole Windows script
undergroundandroid ---> For giving support to my projects
Click to expand...
Click to collapse
Thanks for choosing Lord AIO Tool!!!
Manual Root Way
STEP 1: Obtaining Required Files
a.) Download the latest version LAIOT for Windows (http://forum.xda-developers.com/showthread.php?t=1468298)
b.) Download and Install the latest version of Motorola USB Drivers from HERE.
http://www.motorola.com/Support/US-...tware_and_Drivers/USB-and-PC-Charging-Drivers
c. Download http://dl.atftas.us/OEM/Motorola/XOOM/Xoom-Universal-Root.zip2.
STEP 2. Connect the Xoom, Install SD Card, and setup PC
Make sure your Xoom is turned on. Go to settings and click on [developer options]; turn USB debugging ON; turn stay awake ON
Connect it to your PC via USB.
Make sure you have the Xoom drivers installed and that the Xoom mounts on the computer
Place the following files on the root of your SD Card:
Xoom-Universal-Root.zip (downloaded earlier)
Update.zip (from LAIOT Tools Folder)
Install the LAIOT tools folder on c:/LAIOT
Run the LordAIOTool.bat file
STEP 3: Unlock the Bootloader
Copy update.zip from tools folder and Xoom-Universal-Root.zip to external sdcard
Open cmd window on your PC and type the following commands:
cd C:/
cd LAIOT
cd LAIOT
cd CWMInstall
adb reboot bootloader
Your XOOM will reboot into the bootloader (fastboot mode) showing "Starting Fastboot Support Protocol".
Type the following command into the Command Prompt to unlock your bootloader:
fastboot oem unlock
Read the warning and follow the instructions on the Xoom Tablet itself from this point onwards. On the tablet, accept the terms using [VOL -] and [VOL +] keys
[VOL -] then [VOL +] to select
repeat [VOL -] then [VOL +] to select
Once selected, your Xoom will now unlock and format itself, meaning, all data will be cleared and you will go back to a factory reset. and will reboot on its own bringing you to the setup wizard (skip it). (You do want to let it complete the full reboot process this time)
STEP 4: INSTALL ClockworkMod Recovery (CWM)
Make sure you have the SD card installed in the Tablet.
Bring your Xoom back to the fastboot screen by:
hold [POWER] + [VOL +] until it reboots
Place in Fastboot Mode: During the first 2 seconds after the Dual Core screen appears, press [VOL +]
On the computer, type:
fastboot flash recovery CWMTiamat.img
You will get a confirmation message indicating that the flashing is done on both computer and Xoom. Then:
fastboot reboot
Do not let it boot to completion (normal boot) or you will need to repeat this process.
Now on Xoom, apply update.zip and Xoom-Universal-Root.zip from SD Card:
While booting press [VOL -] 3 sec after Motorola Dual-Core screen appears (Android Recovery Screen should appear)
Then press [VOL +] (CWM screen should appear now)
use the [VOL -] & [VOL +] keys to navigate and [POWER]button to select
Select "Apply sdcard update.zip" and then
- select “choose zip from sdcard”
-select “Xoom-Universal-Root.zip”
- Select "Yes"
Select “Install zip from sdcard”
Now Select “+++++Go Back+++++” and then “Reboot system now”
Note: if you are restoring from a rooted image, you should be able to skip these last two installs (update.zip and Xoom-Universal-Root.zip) and go straight to the restore procedure (step 6)
You should be done, but you now need to confirm your root status by:
Download and install “Root Checker Basic” from Google Play and then run the checker. You should get a prompt to “allow superuser”. Click “Allow” and you should get a confirmation that you have root access.
You are complete and now have a rooted Xoom with Nandroid ClockWords Mod installed
STEP 5: Backup image to SD card
Make sure you have the SD card installed in the Tablet.
On your Xoom:
Hold [POWER] + [VOL +] until it reboots
While booting press [VOL -] 3 sec after Motorola Dual-Core screen appears (Android Recovery Screen should appear)
Then press [VOL +] (CWM screen should appear now)
use the [VOL -] & [VOL +] keys to navigate and [POWER]button to select
Select "backup and restore" and then
- select “backup”
-select “Xoom-Universal-Root.zip”
- Select "Yes" and wait while it completes your backup
Now Select “+++++Go Back+++++” and then “Reboot system now”
STEP 6: Restore image from SD card
Make sure you have the SD card with your backup installed in the Tablet.
On your Xoom:
Hold [POWER] + [VOL +] until it reboots
While booting press [VOL -] 3 sec after Motorola Dual-Core screen appears (Android Recovery Screen should appear)
Then press [VOL +] (CWM screen should appear now)
use the [VOL -] & [VOL +] keys to navigate and [POWER]button to select
Select "backup and restore" and then
- select “restore”
-select your desired backup
- Select "Yes" and wait while it completes your restore
Now Select “Reboot system now”
I'm thinking about changing the name, does anyone know another name?
XxLordxX said:
I'm thinking about changing the name, does anyone know another name?
Click to expand...
Click to collapse
You could just call it Xoom Back-up, Unlock & Root (if a root tool is added).
I think that it's great that young people like you are doing work like this. Good luck!
Cool name
Sent from my MZ605 using XDA App
Is this script applicable for Xoom Wifi US model?
is there unroot option?
Hi, I think it is applicable on Wifi US, as it features doesn't have any thing that prevent you... I liked your unroot a good idea , will put on it on next release, the unique problem of the unroot is that it isn't universal, I'm using Tiamat Universal root, so I don't face this incompanility problem there...
Sent from my MZ605 using XDA App
Don't get how this is a full backup.
What about the stuff in userdata ?
(All the script does is adb pull /sdcard/)
Reading everything like that seems unlikely and if it did include everything don't get how the permissions would work. (For the stuff usually in userdata on phones.)
Or does userdata on honeycomb not matter with regards to either permissions or file ownership ?
---------- Post added at 09:47 PM ---------- Previous post was at 09:34 PM ----------
XxLordxX said:
Hi, I think it is applicable on Wifi US, as it features doesn't have any thing that prevent you... I liked your unroot a good idea , will put on it on next release, the unique problem of the unroot is that it isn't universal, I'm using Tiamat Universal root, so I don't face this incompanility problem there...
Sent from my MZ605 using XDA App
Click to expand...
Click to collapse
There is no reason you couldn't do the process in reverse (Splitting the boot.img - doing the opposite to build.prop reflash)
Wouldn't be signed though.
Does the original stay signed if it is backed up with dump_image ?
I didn't put backup for anyother than /sdcard/ because to backup anyother you need root... and I think I maybe add in beta 7 this option... BTW the new thread is on Android Hacking General you can find the link on the start of the post...
Sent from my MZ605 using XDA App
---------- Post added at 09:47 PM ---------- Previous post was at 09:34 PM ----------
[/COLOR]
There is no reason you couldn't do the process in reverse (Splitting the boot.img - doing the opposite to build.prop reflash)
Wouldn't be signed though.
Does the original stay signed if it is backed up with dump_image ?[/QUOTE]
I don't think so, to restore the unroot (as I know) you need a CWM backup before the install of update.zip and/or the official image (including the system)
Sent from my MZ605 using XDA App
Bump
10 chars
Beta 9 coming!!! Now with Unbrick feature!!!
Sent from my MZ605 using XDA App
Beta 9 is up and with Unbrick feature!
Keep up the good work nick!
And also, hope you make this tool works perfectly on our x10mp too.
Or, make it for all devices! FTW!
Goodluck!
leimrey said:
Keep up the good work nick!
And also, hope you make this tool works perfectly on our x10mp too.
Or, make it for all devices! FTW!
Goodluck!
Click to expand...
Click to collapse
Thanks , I'm working on x10 mini pro, but if you knows anyone can help me on testing please ask him/her to help too ... I only have x10 mini pro and xoom, my brother has a Play, but he don't let me test as it will void him warranty
For user mjamocha66 I wasn't able to send you an email and a PM so the answer is here, after unpacking just double click LordAIOTool.bat on LAIOT folder, no more thing is needed
BUMP, thinking about a new feature, someone can help?
Sent from my MZ605 using XDA App
Repart (BlackRose type) Bootloader. Might as well get started on it because it will come to be needed.
Recovery Switch/Flash Script. There will be alternate recoveries that will all have their pros and cons (stability vs. WIP). Likely to be various stages of touch recoveries with multiple beta testing stages for themes, tools, etc. They may not prove to be trustworthy at first but we will all test them anyway.
Since ADB can now be used over wifi, you can look into adding this functionality as well (wireless).
These are just off the top of my head. My friends and wife know I can do this all day. I'll check in on occasion to see how this tool develops.
Keep up the good work.
Ok thanks for the tip
Sent from my MZ605 using XDA App
Beta 10 is coming, with x10 mini pro Unlock Bootloader Unlocker
................................
2013-07-21 -->> OP update links for download file UPDATE-SuperSU-v1.41.zip.
2013-06-22 -->> OP update links for download file UPDATE-SuperSU-v1.34.zip.
2013-06-08 -->> OP update links for download file UPDATE-SuperSU-v1.32.zip.
2013-06-03 -->> OP update links for download file UPDATE-SuperSU-v1.30.zip.
OP update links for put CWMv6: Direct download CWMv6 (recovery.img) by williegomezt.
For new JB V07 update: Direct download drivers and SP_Flash_Tool_exe_v3.1224.01.
Do you think this will work with other BLU devices? I am thinking about buying a Dash 4.0, but I wouldn't want it without root.
dskrilz said:
Do you think this will work with other BLU devices? I am thinking about buying a Dash 4.0, but I wouldn't want it without root.
Click to expand...
Click to collapse
You searched if there is someone who managed to ROOT your device here in xda?
Root MANY ANDROID! [Upd: 24.04.2013]
I'm also on other forums and had been trying to help a friend who needed to ROOT [BLU Tank 4.5] that has fastboot mode.
[TUTORIAL] Root Blu Dash 4.0
We try ROOT through this process and believe that you can try too. So I do not have these devices, and you must read a lot before making a decision. Before any procedure must have stock ROM or at least a backup of it.
BLU Dash 4.0 has [Chipset Qualcomm MSM8225 Snapdragon]. Furthermore, this procedure Super_Su did not work for with the original recovery BLU VIVO 4.3 ROM JB 4.1.1. With recovery original it says "Installation aborted".
Blu Vivo 910a Jelly Bean generic Rom- How to root
I have a Blu Vivo 4.3 910 a which I updated with the generic Rom from Blu.Did someone root this version.
I tried many like One Click, z4root Version 1.3, root with reset version v.29, but nothing is working.
Also it does not accept update zip Version v.25 it says aborted.
How could it be rooted?
lopestom said:
Download to perform ROOT (if your choice) and place them on your sdcard ---> UPDATE-SuperSU-v1.25.zip
[03.03.2013] SuperSU v1.25 ---> http://forum.xda-developers.com/showthread.php?t=1538053 << --- >> original link -- Thanks for this xda developers.
With the phone turned off, press POWER and VOL +.
Appears CWM v6 -> select install zip from sdcard ---> choose zip from sdcard -> find file with VOL - or VOL + file [UPDATE-SuperSU-v1.25.zip]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Select YES with POWER. There, at the end of the process SU is installed.
Go + ++ Go Back + + + up to find -> reboot system now. Select with POWER.
When you restart the phone, mark in ---> configuration ---> Security --> Unknown sources.
For more details see my other Thread --> Loss IMEIs
So you now have installed a upgraded SuperSU-v1.25.
This it! Your device is ROOTed. :good:
Credit to xda developers for UPDATE-SuperSU-v1.25.zip .
For helping to make it happen => Mario Doce; williegomezt
Click to expand...
Click to collapse
bluvivo said:
I have a Blu Vivo 4.3 910 a which I updated with the generic Rom from Blu.Did someone root this version.
I tried many like One Click, z4root Version 1.3, root with reset version v.29, but nothing is working.
Also it does not accept update zip Version v.25 it says aborted.
How could it be rooted?
Click to expand...
Click to collapse
You must have knowledge of tool SPFT- [SP Flash Tool] to put on BLU VIVO 4.3 device only file "recovery.img" by @williegomezt (CWMv6 - see my signature).
---------------------------------------------------------------------------------------------
Download links are directly updated in the forum.
lopestom said:
You must have knowledge of tool SPFT- [SP Flash Tool] to put on BLU VIVO 4.3 device only file "recovery.img" by @williegomezt (CWMv6 - see my signature).
---------------------------------------------------------------------------------------------
Update links direct in forum.
Click to expand...
Click to collapse
Thanks but there to I get the recovery.img file? The Flash Tool I have.
bluvivo said:
Thanks but there to I get the recovery.img file? The Flash Tool I have.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=33100711&postcount=51
Download [VIVO 910a CMW by williegomezt.rar] unzip the rar file with the password for placed on the post. Inside this file rar have [recovery.img (CWMv6)].
I have the img.file and the flash tool all goes well but and the download and the phone conected it does not have the driver for the USB.
So there is no download.I download the driver but still is not working.Any help?
lopestom said:
http://forum.xda-developers.com/showpost.php?p=33100711&postcount=51
Download [VIVO 910a CMW by williegomezt.rar] unzip the rar file with the password for placed on the post. Inside this file rar have [recovery.img (CWMv6)].
Click to expand...
Click to collapse
Correct procedures to install the drivers.
bluvivo said:
I have the img.file and the flash tool all goes well but and the download and the phone conected it does not have the driver for the USB.
So there is no download.I download the driver but still is not working.Any help?
Click to expand...
Click to collapse
What system you are using Win XP/Vista/7/8?
I'll pass the correct procedures to install the drivers:
On the computer:
Go to the Drivers folder and run "InstallDriver" (for the file I'm sending you).
On your device:
Connect the device to your computer, go to Settings, Options programmer, Activate and check "USB Debugging" and press OK.
On your computer:
1 - Go to device manager, click on unknown device or wrongly recognized (MT65XX Preloader);
2 - MT65XX Preloader updating drivers, click browse for driver software on this computer;
3 - Type of Device, click Show All, and then click Have Disk and browse to the folder "Driver\ADB" and select the file [android_winusb.inf];
See this image for [android_winusb.inf]:http://forum.xda-developers.com/showpost.php?p=38864558
4 - Select Android Composite ADB Interface;
5 - If message appears, requesting confirmation to install, confirm, appear to Windows Security box, asking if you want to install Google Inc, Select Always Trust and install;
6 - Now just do the procedure in SPFT to put only the recovery (CWMv6).
Remember that with Win7 installations should always be run as administrator!
Check this with @tanmay5 in mmxA110 #38 ------->>>> http://forum.xda-developers.com/showthread.php?t=2167244&page=4
For Win8 disable UAC:
3. open control panel in win8 the metro you one not classic one. I think u all might be knowing how to go there.
There click on general tab then click - advanced startup n press restart.
then go to troubleshoot option in press option 7 i.e disable driver signature. Thats the most Important step.
4. your pc will get restarted null enter in the in that option.
5. your UAC (User Account Control) must be enabled atleast to the recommended level/2nd one from the top.
Click to expand...
Click to collapse
This is information within [VIVO 4.3 Tool\Driver_Auto_Installer\Driver_Auto_Installer]:
Driver_Auto_Installer_v1.1208.00
ReadMe.txt
Click to expand...
Click to collapse
Code:
This application will install USB com port driver for MediaTek's device those IDs are listed below:
1."VID_0E8D&PID_0003" (FeaturePhone & Smartphone BootROM - MTK USB Port)
2. "VID_0E8D&PID_0023&MI_00" (FeaturePhone - MTK USB Modem Port)
3."VID_0E8D&PID_0023&MI_02" (FeaturePhone - MTK USB Debug Port)
4. "VID_0E8D&PID_2000" (SmartPhone - PreloaDer USB Port)
5. "VID_0E8D&PID_2001" (SmartPhone - DA USB Port)
6. "Vid_0E8D&PID_2006&MI_02" (SmartPhone - Kernel Gadget USB port, Please customize your kernel VID/PID)
"Vid_0E8D&PID_2007"
"Vid_0E8D&PID_200a&MI_02"
The application user must belong to Administrator group or have the privilege to install driver.
the execution of the InstallDriver.exe will install the driver, and the UninstallDriver.exe is special for remove driver.
the InstallDriver.exe will remove the legacy version of driver before install current driver automatically.
Notes:
1. Windows 2003 use the INF files which under the 2K_XP_COM
2. The device which generates two com ports (USB Modem Port Driver & USB Modem Debug Driver) only support Systems after Win XP sp3 version.
If you want to support these devices in Win XP Sp2, add these patchs:
http://support.microsoft.com/kb/918365/
http://support.microsoft.com/kb/935892/
lopestom said:
Download to perform ROOT (if your choice) and place them on your sdcard ---> UPDATE-SuperSU-v1.34.zip
[03.03.2013] SuperSU v1.34 ---> http://forum.xda-developers.com/showthread.php?t=1538053 << --- >> original link -- Thanks for this xda developers.
Works for both models BLU VIVO 4.3 - D910a and D910i. If you are not with this device, then you should search or create CWM for your own device.
For put CWM v6 in BLU VIVO 4.3 see this: HOW TO PUT CWM v6.0.1.2 by williegomezt
For more details to put "recovery.img" using SPFT see Flashing only part of the ROM: [TUT]MTK Android (Sp flash tool ) tutorialhttp://forum.xda-developers.com/showthread.php?t=1982587
Download SP_Flash_Tool_exe_v3.1224.01 and INSTALL drivers: VIVO 4.3 Tool 20130322.rar
On your device ---> configuration ---> Security --> check the option=> Unknown sources.
Instructions after putting CWMv6: With the phone turned off, press POWER and VOL +.
Appears CWM v6 -> select install zip from sdcard ---> choose zip from sdcard -> find file with VOL - or VOL + file [UPDATE-SuperSU-v1.34.zip]
Select YES with POWER. There, at the end of the process SU is installed.
Go + ++ Go Back + + + up to find -> reboot system now. Select with POWER.
So you now have installed a upgraded SuperSU-v1.34.
That's all! Your device is ROOTed. :good:
Credit to xda developers for UPDATE-SuperSU-v1.34.zip .
For helping to make it happen => Mario Doce; williegomezt
Click to expand...
Click to collapse
I have an error when I use SPFT. I downloaded and installed the MT6577 USB VCOM drivers from http://www.filecrop.com/MT6575-USB-VCOM-drivers.html and they installed fine.
I then followed your instructions for loading your recovery.img file to my phone. I got as far as the blue load line and then I got an SPFT error
BROM EROR : S_FT_NEED_DOWNLOAD_ALL_FAIL (4050)
and then it stops.
Any ideas?
rederikus said:
I have an error when I use SPFT. I downloaded and installed the MT6577 USB VCOM drivers from http://www.filecrop.com/MT6575-USB-VCOM-drivers.html and they installed fine.
I then followed your instructions for loading your recovery.img file to my phone. I got as far as the blue load line and then I got an SPFT error
BROM EROR : S_FT_NEED_DOWNLOAD_ALL_FAIL (4050)
and then it stops.
Any ideas?
Click to expand...
Click to collapse
This is something related to installing drivers. Another interesting case is USB plug behind the PC.
Check this for more drivers MT6577. Download your version for SO (W8/W7/Vista/XP )--> [TUT] Instructions MTK6577 USB VCOM Driver Installation
I read in other posts that you have Win8 and this is not good. But many friends managed. Read post # 10, disable UAC, see picture of correct installation and try again. See this for correct install drivers: http://forum.xda-developers.com/showpost.php?p=38864558
Another attempt is to use scatter file this on my forum [TUT] HOW TO INSTALL ROM 4.1.1 JB - BLU VIVO 4.3 D910i. Download the BLU_D910i_V06_GEN_T8113_20130322_CWM.rar, unzip. In SPFT, select only the option [RECOVERY].
Root blu dash 4.0
dskrilz said:
Do you think this will work with other BLU devices? I am thinking about buying a Dash 4.0, but I wouldn't want it without root.
Click to expand...
Click to collapse
Watch this video: youtube-->How to root Blu Dash 4 0
follow his link to get the rootme pack...
You will need the adb driver... since BLU doesn't provide this anywhere you can install it via installing pdanet...
search google for "topnotchtablets installADBDriver"
I first installed ADB, then I ran the root script and voila my BLU DASH 4.0 was rooted... took me a while to find this out.. searched everywhere for the correct adb driver...
enjoy!:good:
I cannot post links yet because I just registered to this forum today... I would have posted the links tho.. sorry
zachpainter77 said:
Watch this video: youtube-->How to root Blu Dash 4 0
follow his link to get the rootme pack...
You will need the adb driver... since BLU doesn't provide this anywhere you can install it via installing pdanet...
search google for "topnotchtablets installADBDriver"
I first installed ADB, then I ran the root script and voila my BLU DASH 4.0 was rooted... took me a while to find this out.. searched everywhere for the correct adb driver...
enjoy!:good:
I cannot post links yet because I just registered to this forum today... I would have posted the links tho.. sorry
Click to expand...
Click to collapse
I have helped some users BLU. Since then sought to unite all and maybe we can do a full forum here on xda.
So, see this #47: Blu Dash 4.0 D270i Rom damaged after Root
and this: [Q] Custom ROM for the BLU Dash 4.0???
BLU Users Unite
lopestom said:
I have helped some users BLU. Since then sought to unite all and maybe we can do a full forum here on xda.
So, see this #47: Blu Dash 4.0 D270i Rom damaged after Root
and this: [Q] Custom ROM for the BLU Dash 4.0???
Click to expand...
Click to collapse
y this is a good idea . . . There is not enough support for BLU devices out there . . .
ROOT in BLU VIVO 4.3 - JB 4.1.1 - without using SPFT
Hello I did otherwise the root device of people who do not know or do not want to use SPFT.
So read the instructions well and be happy. I researched other ways, but just found this one with Chinese software. Remember: It will install an application Chinese. But I made a tutorial that this app can be removed later.
TUTORIAL ROOT in BLU VIVO 4.3.pdf
VRoot_1.2_Setup.rar
Or see more images here: Guide - How to Root BLU VIVO 4.3 with JB 4.1.1
HOW TO INSTALL ROM 4.1.1 JB - BLU VIVO 4.3 D910a
"Follow my instructions:
- Start again with a new download of the official file.
The battery must be at least half the load.
1. Visit the website: blu.kiwibed.com You must enter the username and password to access the folders
Username: blusoft
Password: aplic10
2. Enter the folder Aplic Software / Software Vivo 4.3 generic.
3. Select the model of your phone (BLU-D910I or BLU-D910A)
4. Download the zipped file on your computer
5. After downloading the file, upload it to the direct sdcard. No need to unpack
6. Turn off the phone and turn it back on leaving the keys pressed simultaneously volume + and power.
7. Menu will appear in the android recovery. With the volume buttons you browse options in this menu and the power button validates the selected option.
8. Appear => Execute/Press --> Wipe factory
9. Appear => Execute/Press --> Wipe cache
10. Choose the option: "apply update from sdcard"
11. Browse by sdcard and choose the file you downloaded.
12. Then the phone will restart and update the new version of android."
I followed the above instructions, now my phone won't boot. Message was; Installation Aborted. So I re-boot it and got stuck to the "Blu Logo". Any help is greatly appreciated to go back to stock rom (ics).
Fherby said:
I followed the above instructions, now my phone won't boot. Message was; Installation Aborted. So I re-boot it and got stuck to the "Blu Logo". Any help is greatly appreciated to go back to stock rom (ics).
Click to expand...
Click to collapse
You're writing in the wrong place. Furthermore, the update should be placed with the original recovery. If you have a BLU VIVO 4.3, then you should not fear anything. So many people make the direct download to phone. This is wrong!
First on the PC and then put the sdcard. It may be that the file you downloaded came with errors.
If you have CWMv6 and backup, is back to normal. If not, try again another update file. If not, put JB version 6 in forum [TUT] HOW TO INSTALL ROM 4.1.1 JB - BLU VIVO 4.3 D910i. Read all the posts and see how to put the JB version 7.
Do not write here again on other matters, that is not the issue ROOT!
lopestom said:
You're writing in the wrong place. Furthermore, the update should be placed with the original recovery. If you have a BLU VIVO 4.3, then you should not fear anything. So many people make the direct download to phone. This is wrong!
First on the PC and then put the sdcard. It may be that the file you downloaded came with errors.
If you have CWMv6 and backup, is back to normal. If not, try again another update file. If not, put JB version 6 in forum [TUT] HOW TO INSTALL ROM 4.1.1 JB - BLU VIVO 4.3 D910i. Read all the posts and see how to put the JB version 7.
Do not write here again on other matters, that is not the issue ROOT!
Click to expand...
Click to collapse
Sorry for writing my comments in the wrong place. Anyway, thanks for the additional info you've provided.
UPDATED INSTRUCTIONS 23/3/2014
Thought I would share this for anyone that's looking for a complete and full root of this phone, this is not my work I was given these instructions for full root of Sony Xperia M Phone by member xzn credits go to him and others mentioned within method here is the method as follows
- FULL ROOT XPERIA M -
material
- Download Framaroot 1.5.3(http://www.2shared.com/file/x5aus8Wd/comalephzainframaroot_153.html?)
- Busybox Pro v9.7.3 (http://www.2shared.com/file/gPQlU2-Q/BusyBox_Pro_9_7_3.html?)
- Busybox Free (https://play.google.com/store/apps/details?id=stericson.busybox)
- Tool By Anto Kus (download here http://www.2shared.com/file/e9sDTGJk/rootfixer.html?)
- some snacks and soda
steps
1. Install framaroot 1.5.3 ,open , then select install supersu, then select gandalf, if its failed, try, try n try until success notification appear and ask to reebot,your phone will reboot, after your phone on again , look for supersu app in menu , if supersu not appear in menu try,try n try again until supersu appears
2. Install BusyBox Pro v9.7.3 , if busybox ask for backup, select yes, then busyboz will loading, after 100%, MAKE SURE BUSYBOX IS INSTALLED IN SYSTEM/XBIN select install, select normal install, after success,reboot your XM
up here, Your phone was half rooted (what is half rooted? its mean that your phone can not edit system file, if you try to edit your system file your XM will sudden reboot) (THIS STEP IS SO YOU CAN CREATE A BACKUP OF YOUR SYSTEM SETTINGS BEFORE BUSYBOX IS INSTALLED BUT IF YOUR NOT BOTHERED ABOUT A BACKUP THEN YOU CAN SKIP INSTALLING THIS BUSYBOX VERSION AND DOWNLOAD THE BUSYBOX FREE AND USE THAT ONE TO INSTALL THE LATEST VERSION STRAIGHT AWAY)
3. eat your snack and drink your soda, stay relax 
4. Extact Tool by Anto Kus to your pc (you will get superuser.bat and supersu.bat), then connect your XM (connect by msc and you must have install pcc on your pc), then run supersu.bat when prompted grant root access on phone
your xm will reboot
Once phone reboots wait for pc to detect phone again then finish supersu.bat then unplug device, MAKE SURE TO RERUN THE. bat FILE AGAIN AFTER FIRST REBOOT TO DOUBLE CHECK THAT THE REBOOT FIX HAS BEEN INSTALLED CORRECTLY, BEFORE RUNNING THE SCRIPT AGAIN AFTER PHONE HAS BEEN DETECTED BY THE PC UNPLUG THE PHONE THEN RERUN THE .bat FILE.
5. DOWNLOAD THE LATEST BUSYBOX FREE FROM PLAY MARKET AND LET SMART INSTALL FINISH LOADING, ONCE LOADED SELECT LATEST BUSYBOX VERSION (CURRENTLY AT V1.22.1-stericson) AND MAKE SURE ITS INSTALLED IN SYSTEM/XBIN. ONCE INSTALLED REBOOT PHONE THEN YOUR DONE
Credit to
- Xzn
- Anto Kus
- Hendrico Andre and Muhammad Arif
from Sony Xperia M Indonesia :highfive:
EXTRA
1: BUSYBOX MUST BE INSTALLED TO SYSTEM/XBIN TO WORK IF NOT AND SYSTEM/BIN IS SELECTED THE PHONE WILL REBOOT AND BUSYBOX WILL NOT BE INSTALLED
2: ALL DRIVERS MUST BE INSTALLED ADB ETC...
3: USB DEBUGGING AND MSC MUST BE SELECTED AND TURNED ON
HOW TO UNROOT LONG VERSION:
*only if you used busybox pro*
1. go into busybox and click on restore, let it do its job. A confirmation popup will appear
2. Go into supersu>settings and scroll down to unroot, click it and let it finish
3. Reboot device (NOTE IF YOU'VE RESTORED VIA BUSYBOX THEN SYSTEM WILL BE VERY LAGGY)
4. Go into settings and carry out a factory reset to clear the device fully.
HOW TO UNROOT SHORT VERSION:
1. Refresh stock firmware via flashtool and select wipe cache and wipe data
2. Let device boot up, can take upto 5+ minutes to boot up.
Sent from My Sony Xperia M C1905
Indeed anyone tried binary4u?
Thanks for this detailed guide..
I have problem ( or better - my brother ) after succesfull root, run rootfixer, but thats not fix anything... phone still rebooting if i want change some in /system ...please help
icoolguy1995 said:
Indeed anyone tried binary4u?
Click to expand...
Click to collapse
Did you install busybox I have tried and tested this method several times and never had any problems follow instructions closely
Sent from my C2005 using xda premium
Ignore the quote as xda app giving me.issues and not selecting the correct post to quote
Sent from my C2005 using xda premium
yes, installed... (and backed up, and wait for 100% loading, then install - normal)
i folowed closely, and still have problem.
Installed busybox to system/xbin?
Sent from my C2005 using xda premium
dont know... but when i now open busybox pro, its pointing to system/bin ...So you think i have to change destination to xbin and install it again ?
Install busybox to system/xbin
You'll get a confirmation screen saying busybox has been installed successfully then reboot your phone once booted up rerun root fix for the superuser app you installed then once phone has booted up again try then
Sent from my C2005 using xda app-developers app
Any luck did that work?
Sent from my C2005 using xda app-developers app
Many THANKS !!! It working now !!!
mmm273 said:
Many THANKS !!! It working now !!!
Click to expand...
Click to collapse
Not a problem I'll try and update that section of the guide
My xda app is playing up everytime I click on original post it FC. I'll try on my laptop
Sent from my C2005 using xda app-developers app
Hello
I have installed supersu, and BusyB to xbin and after running supersu.bat (xm is connected in msc mode and pcc is installed correctly) i have that message like on scrrenshot and nothing happens
new version
delete:
Im using framaroot 1.6.0 (even 1.6.1 is out there) and its hals rooting my device (like in the guide)
After all operations i cant edit system files :crying:
Do i have to turn on USB Debugging ? Its not mentioned in the guide but i find it in this thread
http://forum.xda-developers.com/showthread.php?t=2450265
Im asking because i cant check it since 7 pm
i cannot access the server to the tool by anto kus
can anyone provide mirror for that link
thanks
Found it usb debugging needs to be enabled for root fix so enable it
I'll upload the tool when I get in from work I have it on my laptop
Sent from my C2005 using xda premium
aser44 said:
Hello
I have installed supersu, and BusyB to xbin and after running supersu.bat (xm is connected in msc mode and pcc is installed correctly) i have that message like on scrrenshot and nothing happens
Click to expand...
Click to collapse
Make sure USB debugging is enabled and that PCC has installed the drivers. It didn't work for me either but after PCC installed the drivers it found my device.
This message was brought to you by my Sony Xperia M (C1905), using the XDA app.
OK, finally it worked. Everything like in the guide + enabling USB Debugging
Clean install of a ftf is better than Flashing a Pre-Rooted zip. I flashed a Lp Pre-Rooted zip and face some problem... Specially battery drainage issue. So I cleaned installed the LP ftf. And rooted it afterwards... My battery is a beast now
Requirements
1: King Root http://https://userscloud.com/ke35zvpes88k
2: XZDualRecovery 2.8.15-RELEASE.installer.zip http://nut.xperia-files.com/
3: BETA-SuperSU-v2.49.zip http://https://userscloud.com/7hs0w0d9l46h
(SuperSU-v2.46 will give you binary update error) (place this zip in your internal memory/Sdcard
Steps
1: Flash your latest ftf of LP 5.0.2 via flashtool to start a clean install. IF You are already on LP, ignore step 1.
2: Install King Root Apk and Run it. Click on root. Wait until it says 100%. It should be 100%. U rooted your mobile successfully. Don't restart your mobile.
3: Place XZDualRecovery 2.8.15intsaller.zip in any folder of your PC and extract it.
4: Connect your mobile to your computer with Debugging mode enabled.
5: Open XZDualRecovery folder and Click on Install.bat. A command window will be opend. Choose/Type 2 (root with SuperUser) and pres enter. Follow the instructions... Done... XZDualRecovery is installed
6: Boot in to recovery and Install BETA-SuperSU-v2.49.zip. Restart your mobile... You have a working SuperSu without any binary update problem.
7: Delete KingUser App Manualy by Going into /system/app/kinguser.apk. Or u can delete it by some system app remover application. It is necessary to delete King User App because It may be cause conflict with SuperSu.
All Done.....
Moderater: kindly delete it... Posted in wrong section by mistake
xuhaib said:
Clean install of a ftf is better than Flashing a Pre-Rooted zip. I flashed a Lp Pre-Rooted zip and face some problem... Specially battery drainage issue. So I cleaned installed the LP ftf. And rooted it afterwards... My battery is a beast now
Requirements
1: King Root http://https://userscloud.com/ke35zvpes88k
2: XZDualRecovery 2.8.15-RELEASE.installer.zip http://nut.xperia-files.com/
3: BETA-SuperSU-v2.49.zip http://https://userscloud.com/7hs0w0d9l46h
(SuperSU-v2.46 will give you binary update error) (place this zip in your internal memory/Sdcard
Steps
1: Flash your latest ftf of LP 5.0.2 via flashtool to start a clean install. IF You are already on LP, ignore step 1.
2: Install King Root Apk and Run it. Click on root. Wait until it says 100%. It should be 100%. U rooted your mobile successfully. Don't restart your mobile.
3: Place XZDualRecovery 2.8.15intsaller.zip in any folder of your PC and extract it.
4: Connect your mobile to your computer with Debugging mode enabled.
5: Open XZDualRecovery folder and Click on Install.bat. A command window will be opend. Choose/Type 2 (root with SuperUser) and pres enter. Follow the instructions... Done... XZDualRecovery is installed
6: Boot in to recovery and Install BETA-SuperSU-v2.49.zip. Restart your mobile... You have a working SuperSu without any binary update problem.
7: Delete KingUser App Manualy by Going into /system/app/kinguser.apk. Or u can delete it by some system app remover application. It is necessary to delete King User App because It may be cause conflict with SuperSu.
All Done.....
Click to expand...
Click to collapse
Hi there, I got the problem while rooting my xperia zr and stuck at step 3. I can't recovery me device, could you help me please.
HTML:
==============================================
= =
= PhilZ Touch, CWM and TWRP Dual Recovery =
= Maintained by [NUT] =
= =
= For Many Sony Xperia Devices! =
= =
==============================================
1. Installation on ROM rooted with SuperSU
2. Installation on ROM rooted with SuperUser
3. Installation on unrooted ROM using the TowelRoot method
4. Install ADB drivers to windows
5. Exit
Please choose install action.
[1,2,3,4,5]?2
* server not running *
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
=============================================
Waiting for Device, connect USB cable now...
=============================================
xuhaib said:
Clean install of a ftf is better than Flashing a Pre-Rooted zip. I flashed a Lp Pre-Rooted zip and face some problem... Specially battery drainage issue. So I cleaned installed the LP ftf. And rooted it afterwards... My battery is a beast now
Requirements
1: King Root http://https://userscloud.com/ke35zvpes88k
2: XZDualRecovery 2.8.15-RELEASE.installer.zip http://nut.xperia-files.com/
3: BETA-SuperSU-v2.49.zip http://https://userscloud.com/7hs0w0d9l46h
(SuperSU-v2.46 will give you binary update error) (place this zip in your internal memory/Sdcard
Steps
1: Flash your latest ftf of LP 5.0.2 via flashtool to start a clean install. IF You are already on LP, ignore step 1.
2: Install King Root Apk and Run it. Click on root. Wait until it says 100%. It should be 100%. U rooted your mobile successfully. Don't restart your mobile.
3: Place XZDualRecovery 2.8.15intsaller.zip in any folder of your PC and extract it.
4: Connect your mobile to your computer with Debugging mode enabled.
5: Open XZDualRecovery folder and Click on Install.bat. A command window will be opend. Choose/Type 2 (root with SuperUser) and pres enter. Follow the instructions... Done... XZDualRecovery is installed
6: Boot in to recovery and Install BETA-SuperSU-v2.49.zip. Restart your mobile... You have a working SuperSu without any binary update problem.
7: Delete KingUser App Manualy by Going into /system/app/kinguser.apk. Or u can delete it by some system app remover application. It is necessary to delete King User App because It may be cause conflict with SuperSu.
All Done.....
Click to expand...
Click to collapse
Dude dual recovery doesn't install if rooted via kingroot...if m not mistaken...
well friends, its my first post here on xda.
Eventually I found the easiest way to root D5322 (.472 lollipop 5.0.2 firmware)
and
that is
just run kingroot (I tried english version)
kinguser works like a charm
no need to have superuser or superSU
every app that requires root, works as smooth as butter
like busybox force2SD and all.
I attached the english version of kingroot with this post
those who had rooted their (.470) phone with kingroot and repented later , can also try..
well..
.
.
and if you want to get rid of kinguser that had gotten installed after rooting with kingroot
here is a trick..
I am attaching a zip (thanks to @edwuard )
download that zip
put it in internal memory
extarct that zip in internal memory
now you will get a folder named mrw in your internal memory
..
..
install terminal emulator from market
write the following commands
su
(now grant superuser access)
$ will change in to #
now write the second command
sh /sdcard/mrw/root.sh
(there is space after sh . You can copy this command from here and paste to terminal emulator)
after some sequences in terminal emulator..it will launch SuperSU
and ofcourse remove kinguser
update the binary of superSU
verify root with root checker
.
.
that's it !!
Sequel: Rooting D5322 (Android 5.1.1) :
Well it's for those who have a rooted phone (any previous version) [/COLOR]
Download the ftf file of latest firmware 19.4.A.0.182
Download latest version or V 0.8 of prf creator
Download SuperSU.zip
Now put the prf creator somewhere in your PC (let's say on desktop) extract it there.
Add ftf file and superSU.zip in prf creator
Mark all the boxes on right side of prf creator window
Hit create. In 15-20 minutes you will get a zip file named "flashable" in prf folder
Copy this flashable zip and put it in root of SD card of your phone.
Now reboot your phone in recovery
Follow in sequence :
Wipe>Advanced wipe >select cache,dalvik,system,data, internal memory >swipe to wipe>go back to recovery home>tap install>select external sd card >select that flashable zip>swipe to flash>wipe dalvik>reboot to system.
To install recovery:
Download latest nut's xzdr installer zip
Put it somewhere in your computer
Extract it, you will get a folder of same name
Connect your phone to pc in USB debugging mode
Open the extracted folder
Double click the windows installer batch file
Grant superuser access on your phone's screen
Follow the instructions on terminal
(press 1 on your pc as you have SuperSU in your phone)
After successful instalation of recovery, your phone will reboot into recovery.
Reboot the phone into system
.
.
Now you have a rooted 5.1.1 D5322 with latest Dual recovery.
Thanks alot it's so easy way and it work with me
So easy way
Kinguser Not going off
And i am not able to update to 19.3.A.0.472 stuck on 19.3.A.0.470
I have uploaded the Attachment for it...
plzzzz help
read threads before post
there is already a thread for the same and ask dev before sharing his work
XDA rules
excellent.. 5 stars
awesome... working great
aniket553 said:
And i am not able to update to 19.3.A.0.472 stuck on 19.3.A.0.470
I have uploaded the Attachment for it...
plzzzz help
Click to expand...
Click to collapse
1st I had same problem..
Stucked on . 470
Then I relocked bootloader
Then flashed .472
Then tried above method
Working like charm
Sent from my D5322 using XDA mobile app
Bro did I need to unlock my bootloader to follow this prosiser
............
Zx9. said:
Bro did I need to unlock my bootloader to follow this prosiser
Click to expand...
Click to collapse
No.. You don't need to unlock the bootloader
I'm really interested on following your instructions on how to root this, but first... Will this trick also work on the LTE version?
Sent from my D5303 using XDA Free mobile app
rituraj_singh said:
No.. You don't need to unlock the bootloader
Click to expand...
Click to collapse
Thnx bro ur guide is really easy I successfully rooted my phone yeppy??
kyu0911 said:
I'm really interested on following your instructions on how to root this, but first... Will this trick also work on the LTE version?
Sent from my D5303 using XDA Free mobile app
Click to expand...
Click to collapse
Well.. I don't have D5303, so I haven't tried it on that. You may try.
Zx9. said:
Thnx bro ur guide is really easy I successfully rooted my phone yeppy??
Click to expand...
Click to collapse
That was something I had eventually found..I just shared..
aniket553 said:
And i am not able to update to 19.3.A.0.472 stuck on 19.3.A.0.470
I have uploaded the Attachment for it...
plzzzz help
Click to expand...
Click to collapse
copy the command below
sh /sdcard/mrw/root.sh
paste it to terminal emulator after "su" command
Thank you so much!
Thank you so much for sharing. I can now transfer some of my apps to ext sd card. I can now install more games. Though it can't be changed to supersu using the script and the file you've provided due to unable to update binary, foldermount is working perfectly with kingroot. By the way, I'm using the LTE version D5303 with lollipop .472 and it's now rooted.
Great
Hey can anyone tell how to backup ta partition(dmr keys) on t2 ultra dual d5322 i want to unlock my bootloader.
http://forum.xda-developers.com/showthread.php?t=2292598 use Backup Ta from above link. To backup ta partition
everything working great with this method...
can anyone succeeded installing Xposed properly, working?
rrd84 said:
everything working great with this method...
can anyone succeeded installing Xposed properly, working?
Click to expand...
Click to collapse
The Xposed is not working in our unit, the installation makes the device has bootloops.