Q&A for [KERNEL][GT-I9195][CM-12.1][5.1.1] Chaco
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [KERNEL][GT-I9195][CM-12.1][5.1.1] Chaco. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Good
Hi this kernel is pretty good
Can u add some Tweaks from lombartz kernel
haloass65 said:
Hi this kernel is pretty good
Can u add some Tweaks from lombartz kernel
Click to expand...
Click to collapse
Could you please put the link in order to take a look at it?
Sent from my GT-I9195
chacox said:
Could you please put the link in order to take a look at it?
Sent from my GT-I9195
Click to expand...
Click to collapse
http://forum.xda-developers.com/gal...t/kernel-cm-based-oc-uv-smartmax-gov-t3005709.
Sure
GPU,CPU,L2,RAM OC
haloass65 said:
http://forum.xda-developers.com/gal...t/kernel-cm-based-oc-uv-smartmax-gov-t3005709.
Sure
GPU,CPU,L2,RAM OC
Click to expand...
Click to collapse
Well I've already added cpu oc in my first realease but I've not enabled it because I don't use oc, but i could enable it if you want to.
I would also like to try other feautures of lombartz. It sounds intresting
I Want to Believe
Samsung Galaxy S4 mini
chacox said:
Could you please put the link in order to take a look at it?
Sent from my GT-I9195
Click to expand...
Click to collapse
chacox said:
Well I've already added cpu oc in my first realease but I've not enabled it because I don't use oc, but i could enable it if you want to.
I would also like to try other feautures of lombartz. It sounds intresting
I Want to Believe
Samsung Galaxy S4 mini
Click to expand...
Click to collapse
WOOOOW
I wanna oc my phone
Thanks
Cant wait for the New Kernel
haloass65 said:
WOOOOW
I wanna oc my phone
Thanks
Cant wait for the New Kernel
Click to expand...
Click to collapse
it's done, I hope you enjoy it.
http://forum.xda-developers.com/galaxy-s4-mini/development/kernel-chaco-t3121267
chacox said:
it's done, I hope you enjoy it.
http://forum.xda-developers.com/galaxy-s4-mini/development/kernel-chaco-t3121267
Click to expand...
Click to collapse
Thanks
haloass65 said:
Thanks
Click to expand...
Click to collapse
Just press thanks buttom
I Want to Believe
Samsung Galaxy S4 mini
The New update is good but ..
The performance is as Good AS lombartz kernel
But i Miss 2 tweaks
RAM and GPU OC
btw the New update is unstable like lombartz kernel
I get random reboots :/
Regards
haloass65 said:
The performance is as Good AS lombartz kernel
But i Miss 2 tweaks
RAM and GPU OC
btw the New update is unstable like lombartz kernel
I get random reboots :/
Regards
Click to expand...
Click to collapse
It could be related with freq tables of lombartz, which are the only changes i made in the kernel, the rest i've just modified ramdisk
Sent from my GT-I9195 using XDA Free mobile app
haloass65;61148818
I get random reboots :/
[/QUOTE said:
I am playing with L2 voltages to see if they are the cause of random reboots
Sent from my GT-I9195
Click to expand...
Click to collapse
chacox said:
I am playing with L2 voltages to see if they are the cause of random reboots
Sent from my GT-I9195
Click to expand...
Click to collapse
I think under Volt is a Problem :/
haloass65 said:
I think under Volt is a Problem :/
Click to expand...
Click to collapse
It could be, I am testing some changes in L2 voltages and I think L2 frequencies are also too high.. But for now only with changes made in voltages is working good. I have left undervolt in low frequencies and i put ov in high frequencies
I Want to Believe
chacox said:
It could be, I am testing some changes in L2 voltages and I think L2 frequencies are also too high.. But for now only with changes made in voltages is working good. I have left undervolt in low frequencies and i put ov in high frequencies
I Want to Believe
Click to expand...
Click to collapse
I See
Is it stable?
I would like to UV/OV an OC l2 Cache by my own
But its impossible without recompiling the kernel :/
haloass65 said:
I See
Is it stable?
I would like to UV/OV an OC l2 Cache by my own
But its impossible without recompiling the kernel :/
Click to expand...
Click to collapse
It seems to be stable for now. I haven't had any random reboot for now and look at this results with Max freq. 1998Mhz and performance governor
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
chacox said:
It seems to be stable for now. I haven't had any random reboot for now and look at this results with Max freq. 1998Mhz and performance governor
Click to expand...
Click to collapse
WoW
The performance looks awesome
Can u uploud it ?
haloass65 said:
WoW
The performance looks awesome
Can u uploud it ?
Click to expand...
Click to collapse
I am not going to release it for now, I would like to make more tests before do it, but what I can do is send you a prerelease in a private message if you are agree. That would help me to know how stable is the kernel before to post it.
chacox said:
I am not going to release it for now, I would like to make more tests before do it, but what I can do is send you a prerelease in a private message if you are agree. That would help me to know how stable is the kernel before to post it.
Click to expand...
Click to collapse
Sure u can pm me that
I will do some Benchmarks
haloass65 said:
Sure u can pm me that
I will do some Benchmarks
Click to expand...
Click to collapse
I hope you answer me with good news
Related
This is a direct port of my kernel on the international I9300 Galaxy S3 and sidekick to the international N7100/5 Note 2 kernels.
Recap of features:
CPU overclocking up to 1.8GHz and undervolting from 600mV to 1400mV.
GPU overclocking and undervolting.
GPU scaling reworked.
Screen sharpness and colour modifications.
Extended Pegasusq and improved Performance governors.
Removed Touch Booster and replaced with custom Flexrate mechanic.
Improved scheduler power management for improved idle residencies on auxiliary CPUs.
USB charging rate limit increased to 900mA.
This is supposed to be merely a proxy thread. Please refer to the N7100/5 thread for full changelogs, explanations, bug-reports and other issues. Kernel for specific device versions will be posted here.
This kernel is for the North American T-Mobile variant SCH-T889. Versions for other variants are found in their respective forums.
So we flash the tar with odin???
Sent from my SGH-T889 using XDA Premium HD app
Odin or mobile Odin. Anyway I resolved the size issues and also made CWMs.
Thanks trying out now
Sent from my SGH-T889 using XDA Premium HD app
Thanks, will test for the next couple days. No real nees for me to OC as this device is already a screamer. Personally im after even more battery life.
Sent from my Galaxy Note 2
farfromovin said:
Thanks, will test for the next couple days. No real nees for me to OC as this device is already a screamer. Personally im after even more battery life.
Sent from my Galaxy Note 2
Click to expand...
Click to collapse
Agreed.Performance is Already Screaming fast in MY Opinion,and to reach even more battery life would be cool And Something I an personally interested in. Please let Us know if this increases battery life even more so than Stock, I really don't care about Overlooking at all. SO FAST already!
Perseus are custom and Kennel T889 are stock ? Thank for support us.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Nice solid kernel. Will we see more govoners in the near feature?
VIIRU§ said:
View attachment 1439199
Nice solid kernel. Will we see more govoners in the near feature?
Click to expand...
Click to collapse
did you flash the perseus kernel???
slimc84 said:
did you flash the perseus kernel???
Click to expand...
Click to collapse
Yes
Sent from my SGH-T889 using xda premium
VIIRU§ said:
Nice solid kernel. Will we see more govoners in the near feature?
Click to expand...
Click to collapse
No, because they're useless. If you want to change the scaling logics then pegasusq has all the variable knobs configurable to tweak or emulate other governors at disposition.
I'd also prefer if people stop posting Quadrant scores as it's a completely outdated and non representative benchmark.
This kernel seems pretty solid....flashed on Xquizit v2 and running great....
running good thanks first screen shot(left) is you kernel. 2nd without. its at the bottom from spot 2729 to 789 id call that great improvement .
Questions to the OP. Did you compile this rom from our sources or is this an actual direct port?
Sent from my SGH-T889 using xda premium
VIIRU§ said:
Questions to the OP. Did you compile this rom from our sources or is this an actual direct port?
Sent from my SGH-T889 using xda premium
Click to expand...
Click to collapse
This is a kernel and not a rom.
Sent from my SGH-T889 using Tapatalk 2
Im gonna underclock to 1200 lol.
Sent from my Galaxy Note 2
thanks man that was quick... gonna be flashing this asap, just got one question.... why flash using odin when you got cwm?
please I need the Stock Kernel as soon as possible .
redbike said:
please I need the Stock Kernel as soon as possible .
Click to expand...
Click to collapse
???Did you not read the OP???
redbike said:
please I need the Stock Kernel as soon as possible .
Click to expand...
Click to collapse
paul89 said:
???Did you not read the OP???
Click to expand...
Click to collapse
10 char
Sent from my SGH-T889 using xda premium
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PRESENTS:
ASDK v2.0
(All-Star Devs Kernel)
Only for AT&T/TMOBILE variant of SGS3 (I do not own a AT&T variant so feedback is appreciated greatly)
Linux kernel 3.4.45
GPU clock to 480MHz
Governors (ASDK, INTELLIDEMAND, SMARTASSH3, WHEATLEY, INTERACTIVE, CONSERVATIVE, ASSWAX, ASDEMAND, ONDEMAND, USERSPACE, DANCEDANCE PERFORMANCE)
Schedulers (CFQ, BFQ, FIOPS, FIFO, VR, SIO, NOOP, DEADLINE, ROW, ZEN)
Overclocking & Undervolting
Max OC 1.8 ghz
Fast Charge
Fauxsound
S2W [Thanks to Ktoonsez implement]
Other features you will see if you decide to use my project
Linaro 4.7-2013.01-1-2013 for super-fast-mode optimized builds
Only for ASOP Roms running 4.2.2 AFTER 3/19/13
Click to expand...
Click to collapse
FOR LINUX 3.4.x ROMS (COMPILE ON OR AFTER TO 4/19/2013)Size: 8.3 MB
MD5: 4190781d09f767ad1e17f35be5d5c03e
Download Link: http://tinyw.in/icGS
Click to expand...
Click to collapse
Changelog
05/17/13
http://forum.xda-developers.com/showpost.php?p=41534955&postcount=158
04-29-13
http://forum.xda-developers.com/showpost.php?p=40833678&postcount=155
04-20-2013
http://forum.xda-developers.com/showpost.php?p=40522361&postcount=145
04-09-2013
http://forum.xda-developers.com/showpost.php?p=40103722&postcount=143
04-01-2013
http://forum.xda-developers.com/showpost.php?p=39816175&postcount=141
03-30-2013
http://forum.xda-developers.com/showpost.php?p=39761710&postcount=140
03-25-2013 (after 3/19/2013 builds)
http://forum.xda-developers.com/showpost.php?p=39562716&postcount=138
02-24-2013
http://forum.xda-developers.com/showpost.php?p=38402228&postcount=101
02-07-2013
http://forum.xda-developers.com/showpost.php?p=37687943&postcount=60
01-26-13
http://forum.xda-developers.com/showpost.php?p=37232181&postcount=48
Click to expand...
Click to collapse
Thank You for these guys for helping me get through deving this kernel and withstanding my annoying questioning
Xoomdev
Ktoonsez
Imoseyon
anterus
Thomas.raines
Ptmr3
Faux123
Cyanogenmod
Click to expand...
Click to collapse
SOURCE: https://bitbucket.org/ayysir/asdk-sgh-krait/
Click to expand...
Click to collapse
WEBSITE: http://goo.gl/2PxuO
Click to expand...
Click to collapse
Let me take this post right quick
Awesome! Can't wait to try! Thanks!
nice to see some new kernels popping up. we appeciate your work!
Damn, 3 new kernels in the last few days. I'm gonna run this for a bit
thanks for the support! let me know how it runs!!
Smurf colors support?
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
jayRokk said:
Smurf colors support?
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
trinity colors support but idk about smurf? what feature is that?
ayysir said:
trinity colors support but idk about smurf? what feature is that?
Click to expand...
Click to collapse
Lol its the same as Trinity colors. Just another name for them. Thanks BTW
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
jayRokk said:
Lol its the same as Trinity colors. Just another name for them. Thanks BTW
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
Ahh Gotcha
Sent from my SGH-T999 using Tapatalk 2
Update in op
Awesome, using this, 04/19 build
Q: ASDK gov, what is that? Battery or performance orientated?
Thanks
Downloaded and tried out this kernel for the past hour and have had no issues, but I run at 1500 mhz, but still very stable. Nice work! Ill provide feedback again after a few days.
xxsashixx said:
Awesome, using this, 04/19 build
Q: ASDK gov, what is that? Battery or performance orientated?
Thanks
Click to expand...
Click to collapse
well i am working on it. Based on Ondemand governor. Just haven't had time to work on it substantially
ayysir said:
well i am working on it. Based on Ondemand governor. Just haven't had time to work on it substantially
Click to expand...
Click to collapse
Cool cool, I'm using smartassh3, works well
NEW BUILD UP
changelog here:
http://forum.xda-developers.com/showpost.php?p=40833678&postcount=155
Are these kernels in this forum compatible with Touchwiz or just AOSP?
Thank you
Sent from my SGH-I747 using Tapatalk 2
epsix said:
Are these kernels in this forum compatible with Touchwiz or just AOSP?
Check the OP. Only for AOSP Roms running 4.2.2 AFTER 3/19/13. So this won't work on TW. Bummer too, I bounce back and forth about once a month!
Click to expand...
Click to collapse
epsix said:
Are these kernels in this forum compatible with Touchwiz or just AOSP?
Thank you
Sent from my SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
AOSP only tw kernels are a pain to dev for, for the little time I have already
Sent from my SGH-T999 using Tapatalk 2
I will piggy back off of an earlier post. Download and running for past 2-3 hours and no hiccups at all. S2W working everytime and my rom is running fine... Nice work and thanx
Phenom Kernel by educk
Hello Everyone!
Everybody know the Great Kernel for S+ device by Mr. Erik, and I proudly port it to W with its features
So this Kernel is made by @educk
Features:
*Build with Linaro Toolchain 4.7.4 - Cortex A8 with neon optimization
*Overclock up to 1.8 GHz
*Advanced O2 optimization
*AVS enabled
*CPU Voltage Control (VDD sysfs interface)
*Extreme Undervolt
*No JPEG Compression
*Governors: Hyper, Lulzactive,LulzactiveW, BrazilianWax,interactiveX,conservative,ondemand,powersave,smartassV2 and performance
*I/O schedulers: SIO,VR,ROW,NOOP,Deadline,CFQ,BFQ
*Great Battery Life
*Optimized for Perfomance
*Optimized Low Memory Killer
*Optimized RWSEM Algorithm
*Optimized Readahead for better disk performance
*BLX (Battery Life eXtender)
*Dynamic Sync Control
*Lowered Swappines
*USB OTG support
*Frandom Support
*RAM Console Support
*Increased Audio Loudness
*zCache activated
*Zsmalloc activated
*And more
Info
* I Cloned his branch cm-10.1_new, and ported every thing to ancora board
* The new drivers of sensors doesnt included because it needs changes in device tree
* I used O2 not O3 [when I use O3 the phone doesnt boot, I will see what is the problem]
* Frandom not activated [you can use script for it]
* Enjoy
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Note: If you got boot-loop with ExUV edition try Normal UV because your phone doesnt
supoort Very Low Voltages..
Download
V1=ancora <==> V4.8=ariesve
*Initial Build for ancora
*It is synced with educk's repo for change-log please visit S+ thread
Click to expand...
Click to collapse
* Stock RAM [351] & No [OC/UV] : Link
* More RAM [370] & [OC/UV] : Link
* More RAM [370] & [OC/ExUV] : Link
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Installation
-Reboot into recovery
-Install the flashable zip of any version
-Wipe Cache and Dalvik-Cache
-Reboot to system
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Source for ancora
Github Branch
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Voltage Table
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Credits
*arco68
*educk
*all Developer in this forum and ariesve forum
Click to expand...
Click to collapse
Click to expand...
Click to collapse
reserved
BrrrrrrILIANT! Didn't know kernels can be ported
CyanogenMod®
First Post updated with Links
Enjoy
What about rev lcd 3?
from my wonder AOIP
mohza said:
What about rev lcd 3?
from my wonder AOIP
Click to expand...
Click to collapse
You will have white screen bug ..
Sent by Wonder powered by CM10.1
its great madri thanks for ur work.
Sent from my GT-I8150 using Tapatalk 4 Beta
good job @Madridi
i want to ask about instalation plus every time i use a kernel with more ram option i got the same ram 351 mb, i don't know why?
just wany to ask what is difference if UV and ExtUV? thanks in advance.
Sent from my GT-I8150 using Tapatalk 4 Beta
Good job Madridii!
Thank you for porting
Edit: Don't forget about zCache and Zsmalloc, they are also active. I'll PM you about BLX...
I'm download all for compare, thanks :thumbup:
vetfactor said:
good job @Madridi
i want to ask about instalation plus every time i use a kernel with more ram option i got the same ram 351 mb, i don't know why?
Click to expand...
Click to collapse
Thanks,
Installation added to first post and I just tried OC/UV 370MB again to check RAM usage I found it 370MB , Maybe you didnt wipe caceh and dalvik
Clyke said:
just wany to ask what is difference if UV and ExtUV? thanks in advance.
Sent from my GT-I8150 using Tapatalk 4 Beta
Click to expand...
Click to collapse
You can find the Chart in the first post made by educk ..
UV : under-volt
ExUV : Extreme under-volt.
educk said:
Good job Madridii!
Thank you for porting
Edit: Don't forget about zCache and Zsmalloc, they are also active. I'll PM you about BLX...
Click to expand...
Click to collapse
Thanks educk , without you I cant do anything
about that features I want to read more about them to understand it correctly
and I am waiting your reply about BLX, take your time..
yes. but what is the difference of undervolt and extreme undervolt? it cant less performance?
Sent from my GT-I8150 using Tapatalk 4 Beta
wipe cache and dalvik, install, fix perm, reboot, wipe again>>> good
rev 2 but i think i had seen the white screen bug once.
i will check some games.
then i will install seeder and try again.
Clyke said:
yes. but what is the difference of undervolt and extreme undervolt? it cant less performance?
Sent from my GT-I8150 using Tapatalk 4 Beta
Click to expand...
Click to collapse
No .. It just improve battery life
Sent by Wonder powered by CM10.1
so it means uv us more batery and Ext.UV is more more batery?
Sent from my GT-I8150 using Tapatalk 4 Beta
Clyke said:
so it means uv us more batery and Ext.UV is more more batery?
Sent from my GT-I8150 using Tapatalk 4 Beta
Click to expand...
Click to collapse
yes, but some phones cant live with ExUV so we have UV
370 mb ram worked.:laugh:
white screen bug confirmed rev 2.
diamond dash FC.
others are well temple run and subway surf.
installed seeder.
overclocked to 1824 mb.
all well except fc of diamond dash and white screen bug.:good:
vetfactor said:
370 mb ram worked.:laugh:
white screen bug confirmed rev 2.
diamond dash FC.
others are well temple run and subway surf.
installed seeder.
overclocked to 1824 mb.
all well except fc of diamond dash and white screen bug.:good:
Click to expand...
Click to collapse
White screen bug on rev2?? when it appears??
aww, great things cooking here!
maybe I will get rid of cm10.2 to try this, yeah
thx bro) perhaps it will be my last mod applied to ancora, cause I have less than a week till I get my nexus4 delivered
Sent from my GT-I8150 using XDA Premium HD app
[Discontinued]
The kernel is fully compatible with FauxClock
My preferred settings:
General:
I/O Control
Read Ahead Buffer Size: 1024
Scheduler: fiops
CPU Frequency Control
Min: 162000
Max: 1890000
CPU Governor Control
Governor: interactive
Specific:
MP-Decision: disabled
Intelli-Plug: enabled
Dynamic FSYNC: enabled
GPU Governor: simple
GPU Max Frequency: 450
ZRAM: enabled
Working great over here! Using carbon rooms latest nightly...
Edit: notification light keeps blinking when no notification present.
Carbon 4.3 LG OG Pro
If you notice some problems or bugs, please provide a logcat / dmesg log.
http://forum.xda-developers.com/showthread.php?t=1726238
Thank you for this!
No issues as of yet faux sound is working great on CM10.2
The settings you recommend what benefit do they offer users?
Edit: also I believe you posted this in the wrong section it should be in the other dev section
Sent from my LG Optimus G Pro
justin860 said:
Thank you for this!
No issues as of yet faux sound is working great on CM10.2
The settings you recommend what benefit do they offer users?
Edit: also I believe you posted this in the wrong section it should be in the other dev section
Sent from my LG Optimus G Pro
Click to expand...
Click to collapse
I agree, this is an original, thanks again!!!!!
Also, I am having the notification light issue as well, appears to be an issue with the light going off after a notification was received. I'm at work, so I cannot do a logcat at the moment. Again, thanks for the custom kernel. Faux sound is a welcomed addition to the E980
pedal2themedal said:
I agree, this is an original, thanks again!!!!!
Also, I am having the notification light issue as well, appears to be an issue with the light going off after a notification was received. I'm at work, so I cannot do a logcat at the moment. Again, thanks for the custom kernel. Faux sound is a welcomed addition to the E980
Click to expand...
Click to collapse
Are you using the official CM10 from get.cm? Because in the original post it states that it is only compatible with that and that is what I'm using and not experiencing that issue.
Sent from my LG Optimus G Pro
justin860 said:
The settings you recommend what benefit do they offer users?
Click to expand...
Click to collapse
These are just my preferred settings - balanced between performance and battery saving.
Wootever said:
Github
Click to expand...
Click to collapse
Do you mind if I include this kernel in some of my ROMs? I started pulling in some of faux's cherry picks into mine but haven't had time to test
Have a chance to see what is needed to fix the light issue when using this with custom ROMs?
Sent from my LG-E980 using xda app-developers app
can you add cpu overclock? s4 can at run 2.3 ghz
kaymmm said:
Do you mind if I include this kernel in some of my ROMs? I started pulling in some of faux's cherry picks into mine but haven't had time to test
Click to expand...
Click to collapse
Sure that is no problem.
pedal2themedal said:
Have a chance to see what is needed to fix the light issue when using this with custom ROMs?
Sent from my LG-E980 using xda app-developers app
Click to expand...
Click to collapse
Like i said in a previous post: please provide a logcat / dmesg log so i can take a look at this issue.
da blitz said:
can you add cpu overclock? s4 can at run 2.3 ghz
Click to expand...
Click to collapse
Yes will be included in one of the next versions.
@Wootever thank you for this kernel and settings it's fast and amazing standby time. Usually by this time every day at work I am at 75 percent battery with the same amount of usage
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my LG Optimus G Pro
This kernal is legittttt ... bat life amazing and still fast. I am also have the led blinking but then goes away after an hour i wanna say . Ill post my logs in a few. Thanks !
Wootever said:
Sure that is no problem.
Yes will be included in one of the next versions.
Click to expand...
Click to collapse
Thak you and if is possible,600 MHz in GPU overclock like faux kernel
Sent from my LG-E986 using XDA Premium 4 mobile app
Awesome.
Say, Wootever, could you make a Custom Kernel for those of us using CM10.1?
I wonder if there's a big difference between CM10.1 and 10.2 kernels.....
I want to know if you'd make one for stock roms
If it's possible
Sent from my LG-E980 using xda app-developers app
SupaKid said:
Awesome.
Say, Wootever, could you make a Custom Kernel for those of us using CM10.1?
I wonder if there's a big difference between CM10.1 and 10.2 kernels.....
Click to expand...
Click to collapse
I will take a look at this.
spexwood said:
I want to know if you'd make one for stock roms
If it's possible
Sent from my LG-E980 using xda app-developers app
Click to expand...
Click to collapse
Probably yes, but i will have to wait until the next (hopefully soon) 4.2 update is released.
Updated first post for version 02.
Wootever said:
I will take a look at this.
Probably yes, but i will have to wait until the next (hopefully soon) 4.2 update is released.
Updated first post for version 02.
Click to expand...
Click to collapse
I don't know where you've been hiding on xda but you sir are amazing and well I love you lol thanks for the kernel
Sent from my LG Optimus G Pro
This is my third attempt at getting you a logcat for the led light issue lol.
http://d-h.st/MxT
This kernel has been tested and working on Honor 9 lite and is made from official sources from Huawei oss with some added features.
added features are in the following screenshots and spectrum support is coming soon.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am a complete noob when it comes to making something this is my first ever custom kernel with a lot of digging through xda threads and with help from some great people I somehow made this.
dont forget to give the noobie some love ,hit that thanks button
made from FLA sources downloaded from huawei OSS.
https://consumer.huawei.com/en/opensource/detail/?siteCode=worldwide&keywords=FLA&fileType=openSourceSoftware&pageSize=10&curPage=1
thanks to @hackintosh5 for helping me out with compiling errors
thanks to @henriyulianto for guiding and helping me learn a lot things
sunny_deed said:
This kernel has been tested and working on Honor 9 lite and is made from official sources from Huawei oss with some added features.
added features are in the following screenshots and spectrum support is coming soon.
I am a complete noob when it comes to making something this is my first ever custom kernel with a lot of digging through xda threads and with help from some great people I somehow made this.
dont forget to give the noobie some love ,hit that thanks button
thanks to @hackintosh5 for helping me out with compiling errors
thanks to @henriyulianto for guiding and helping me learn a lot things
Click to expand...
Click to collapse
You should point out that this is using the FLA sources, the only ones with working WiFi/Bluetooth
Sent from my kminiltexx using XDA Labs
What governo do you suggest to use?
wetito said:
What governo do you suggest to use?
Click to expand...
Click to collapse
Depends on your requirements and usage
wetito said:
What governo do you suggest to use?
Click to expand...
Click to collapse
https://forum.xda-developers.com/general/general/ref-to-date-guide-cpu-governors-o-t3048957 you can see from this wonderful guide and select
i don't use phone for gaming, so i prefer battery duration instead of performance
wetito said:
i don't use phone for gaming, so i prefer battery duration instead of performance
Click to expand...
Click to collapse
It is better for you to choose "powersave", or at least other balance-oriented CPUFreq governor.
This phone, or other hi6250 devices, or even other multicore CPUs powered phone (ARM), may apply ARM big.LITTLE technology: High-performance CPU (big), and High-efficiency CPU (LITTLE). You can choose same or different governor for each group. AFAIK, the defaults (manufacture/vendor settings) are "ondemand" for big CPU, and "interactive" for the LITTLE one. It could be a good reference for choosing the governors on your own.
By the way, thanks to @sunny_deed and other devs as well, for bringing this up.
I tried to change max CPU freq but i can do It. After closing kernel adiutor, The freq value return to default
wetito said:
I tried to change max CPU freq but i can do It. After closing kernel adiutor, The freq value return to default
Click to expand...
Click to collapse
Sunny is working on it
Sent from my kminiltexx using XDA Labs
hackintosh5 said:
Sunny is working on it
Click to expand...
Click to collapse
I have installed sunny, but for me don't work
wetito said:
I tried to change max CPU freq but i can do It. After closing kernel adiutor, The freq value return to default
Click to expand...
Click to collapse
this should work did check apply on boot and then reboot ?
How to flash?
dudemathai said:
How to flash?
Click to expand...
Click to collapse
How do you think... TWRP
Sent from my kminiltexx using XDA Labs
hackintosh5 said:
How do you think... TWRP
Click to expand...
Click to collapse
Sorry I ,what I meant to say was can I use it with emui,I've not changed the rom ,but I have root access and twrp
dudemathai said:
Sorry I ,what I meant to say was can I use it with emui,I've not changed the rom ,but I have root access and twrp
Click to expand...
Click to collapse
Yes!
Sent from my kminiltexx using XDA Labs
sunny_deed said:
this should work did check apply on boot and then reboot ?
Click to expand...
Click to collapse
Yes i tried It, but don't work
wetito said:
Yes i tried It, but don't work
Click to expand...
Click to collapse
He hasn't implemented it yet...
Sent from my kminiltexx using XDA Labs
Is this stable enough to not let the phone crash and is it good enough to get a bit more battery life or performance? Im sorry but I haven't used any custom kernels.
Fredin_ said:
Is this stable enough to not let the phone crash and is it good enough to get a bit more battery life or performance? Im sorry but I haven't used any custom kernels.
Click to expand...
Click to collapse
Yes
Sent from my kminiltexx using XDA Labs
hackintosh5 said:
Yes
Sent from my kminiltexx using XDA Labs
Click to expand...
Click to collapse
Thanks ?