Develop Bugs

[Recovery] CWM Recovery v5.5.0.4 (Fixed) For Micromax A90

How to install clockworkmod recovery:
Edit: Fixed install zip from sdcard bug
Method 1: Needs root
The first method is preferable for those who have root access on their Micromax A90. Those who do not have a rooted device should follow Method 2 instead.
1. Download cwmr_v5.5.0.4 (fixed).zip and unzip/extract it. After extracting move both the files to the root directory of your SD card.
2. Install mu7577.apk and run it. After that give the program root permissions if asked and tap Recovery Update.
3. Select recovery.img from SD card then tap the ok button.
4. Now you can reboot to recovery.
Congrats!
Method 2: SP Flash Tool method, root not required
1. Download MTK6575 Drivers.zip and unzip/extract on your Windows PC, just run InstallDriver.exe to install drivers.
2. Download cwmr_v5.5.0.4 (fixed) + scatter.zip and SP_Flash_Tool_v3.1220.02_FOR_S101A.zip , unzip/extract them.
3. Now open extracted SP Flash Tool folder and run Flash_tool.exe
4. Click on "Scatter-loading" button which is on the right side below Downloading Agent. A new window will open. Browse to the extracted cwmr_v5.5.0.4 (fixed) + scatter folder and select MT6575_Android_scatter_emmc.txt file.
5. Flash tool will populate the Map file on the application window. You will see multiple entries. Uncheck all entries except for RECOVERY.
6. Now click on "Download". Warning message will occur, but ignore that and click Yes.
7. You will see in the status bar below "Searching", now connect your phone (without battery inserted) via the USB cable.
8. Wait for the process to finish and then you will get a window showing green circle.
Congrats You have flashed CWMR!
Note: If you get any error in SP Flash Tool, then recheck your MTK drivers installation or manually install them through device manager.
Booting into CWM recovery is the same as in the stock recovery. Switch on the phone with "Volume Up" and "Power" button Pressed. The Phone will boot into CWM!
I have also attached the the Stock Recovery.zip.

dear brother are you tested it ! please post some screenshot here with A90.

BHARDIK said:
dear brother are you tested it ! please post some screenshot here with A90.
Click to expand...
Click to collapse
Yes bro I have tested it!
I will post the screenshots soon

please also post here STOCK ROM full firmware , because if we failed then we need to restore i try custom recovery maybe 10 times always failed then need to go service center for restore. if you add stock firmware then we no need to worry about any experiment.

Presently I also don't have the stock rom or stock dump of micromax a90, I am currently running a self modded rom.
Follow this guide http://forum.xda-developers.com/showthread.php?t=1981107 to make a dump/backup of rom
Sent from my A90 using xda app-developers app

i have ROMDUMP back up , take backup using terminal emulator type onandroid and he done , but no boot and recovery image on this back up.
but i dont know how to restore it using sp flash tool ?

BHARDIK said:
i have ROMDUMP back up , take backup using terminal emulator type onandroid and he done , but no boot and recovery image on this back up.
but i dont know how to restore it using sp flash tool ?
Click to expand...
Click to collapse
bro follow my guide to dump the rom, by that guide you will get the complete dump i.e all flash files such as boot.img, recovery.img, system.img, mbr.img, logo.img, etc and there i have also written the complete procedure to restore the dump using sp flash tool
Sent from my A90 using xda app-developers app

THANX
The guide is great....CMW installed in minutes...thanx a lot...waiting for custom rom

airjordanthehacker said:
bro follow my guide to dump the rom, by that guide you will get the complete dump i.e all flash files such as boot.img, recovery.img, system.img, mbr.img, logo.img, etc and there i have also written the complete procedure to restore the dump using sp flash tool
Sent from my A90 using xda app-developers app
Click to expand...
Click to collapse
in your method when i try to add script in GS_Script.apk select file but no any file saw there
and second question is this method is working for Micromax A90s MTK6577 devices also ?

BHARDIK said:
in your method when i try to add script in GS_Script.apk select file but no any file saw there
and second question is this method is working for Micromax A90s MTK6577 devices also ?
Click to expand...
Click to collapse
extract BackupTool_*.zip to the root of your sd card after that only you will be able to see the script in load script option.
and i have not tested this script on mtk6577 but it should work for it.
Sent from my A90 using xda app-developers app

hey guys here is micromax FTP server site here u find all micromax android mobile stock ROM all the version of realesed + original flasher and imei writing tolls for MTK 65166 TO MTK6577 ! is it good for you guys ?
***
user id = mxlive [ in small latter ]
password = [email protected] [ M capital its not (O) its (0) zero ]
best way to use this !
you need Firefox browser for this, in Google chrome its not working !
just copy past this given id and password if you not understand !
and then use Internet Download Manager for downloading anything ! for better downloading speed !

Is there any Jellybean custom ROM for the A90?

No Abhi Still no sign of any ! Custom ROM ! for A90 and A90s both just have CWM !!!!

BHARDIK said:
hey guys here is micromax FTP server site here u find all micromax android mobile stock ROM all the version of realesed + original flasher and imei writing tolls for MTK 65166 TO MTK6577 ! is it good for you guys ?
***
user id = mxlive [ in small latter ]
password = [email protected] [ M capital its not (O) its (0) zero ]
best way to use this !
you need Firefox browser for this, in Google chrome its not working !
just copy past this given id and password if you not understand !
and then use Internet Download Manager for downloading anything ! for better downloading speed !
Click to expand...
Click to collapse
thanks!

BHARDIK said:
No Abhi Still no sign of any ! Custom ROM ! for A90 and A90s both just have CWM !!!!
Click to expand...
Click to collapse
Has anyone tried flashing ROMs of similar devices like Karbonn A18?
Sent from my Galaxy Nexus using Tapatalk 2

provide URL please
Please provide URL Please?

Micromax Stock Rom & Flasher site FTP or otherwise please!
Can anyone post or tell me where I can get Micromax Stock Rom & Flasher from their site or otherwise please? I'd like to reflash to stock state instead of just removing CWM.

airjordanthehacker said:
extract BackupTool_*.zip to the root of your sd card after that only you will be able to see the script in load script option.
and i have not tested this script on mtk6577 but it should work for it.
Sent from my A90 using xda app-developers app
Click to expand...
Click to collapse
Hi, it woks with NGM Legend ? (mtk 6575 phone)

Still no sign of any custom ROM?
Anyway, which device has a similar config as the A90. I'll try flashing it's custom ROM.

Custom Rom ICS 4.0.6
Dear All,
See my thread here for Custom Rom
My mobile is - NXG Phablet.
Its specifications match to A90.
Check - ics 4.0.6 custom rom in my thread and download.
but use your A90 ics 'boot.img'.. means, replace your 'boot.img' in the downloaded file and rezip and flash through CWM recovery.
after boot it will come in Russian language. (because it is for Star N8000 - russian forum). so change language to english in settings. also , default launcher is SPB shell - Russian version. so install another launcher and use.
Rom is very good.
check here in CUSTOM ICS area.
http://forum.xda-developers.com/showthread.php?p=32932373
Happy Testing.

Motorola Defy Mini XT320 all-in-one script

Motorola Defy Mini XT320/XT321 all-in-one script/utility
I've ported mattlgroff's DROIDRAZR all-in-one Script to the Motorola Defy Mini XT320/XT321. This will make life easier and it will do it for you.
Make sure you have fastboot mode if not please refer to this guide for fastboot but there is a fastboot checker in option 6 but it won't install fastboot for you.
Link: http://forum.xda-developers.com/showpost.php?p=36199694&postcount=3
Options available:
1. Root your Motorola Defy Mini XT320/XT321
2. Install 2nd-init/TWRP Recovery
3. Overclock installation
4. Unroot Device
5. Wipe Data/Factory Reset
6. Fastboot checker.
7. Exit Utility
Instructions:
NEW PACKAGE & instructions
1. Download the EXE file at http://www.mediafire.com/?c81fnrtrki65e9i
2. Double click on the exe.
3. Choose an option by entering a number from 1 to 7
OLD PACKAGE & instructions
1. Download package at [REMOVED OLD LINK]
Please Download the fixed package at http://www.mediafire.com/?krxtemrthsz5ier
EXE Version: http://www.mediafire.com/?0kwmx4whjj1ua8c
2. Extract the zip file making sure all the files are in the same place.
3. Click on the batch file named 'DefyMiniUtility.bat'
4. Choose an option by entering a number from 1 to 7.
Credits to:
- Bernd.Defy for overclock module and Guitwo2 for init.d script
- Guitwo2 and jkkk88 for TWRP and aweosomeabhjeet for 2nd-init
- DoOMLoRD for unroot script
- Mattlgroff for the original DROID RAZR all-in-one script
If anyone knows if I missed a member for the credits, please PM me. Thanks
Make sure press thanks if it works
Guys please don't repost it as your own work, otherwise I'll report it and you will get banned from XDA.
NOTE: If you have previously used the old EXE to install TWRP then please remove the old folders by using these instructions using cmd before using updated exe to install TWRP;
1.
Code:
adb shell
2.
Code:
su
3.
Code:
mount -o remount,rw -t yaffs2 /dev/block/mtdblock11 /system
4.
Code:
rm -R /system/bootmenu
Then use the updated exe to install TWRP.
NOTE: If you don't like TWRP, you can download Guitwo2's Permanent CWM at http://forum.xda-developers.com/attachment.php?attachmentid=1875373&d=1365682716
Temporary CWM Recovery: http://forum.xda-developers.com/attachment.php?attachmentid=1875299&d=1365680458
2nd-init does NOT work in CWM Recovery
Thanks to @Guitwo2 for CWM Recovery.
Instructions on how to install Permanent CWM Recovery:
1. Make sure stericson-busybox is installed
2. Put XT320_bootmenuV2.zip in the root of your sdcard
3. Reboot into fastboot mode by typing this command in cmd:
Code:
adb reboot bootloader
4. Then type this command in cmd:
Code:
fastboot boot recovery.img
5. Then use volume keys to navigate and power button to select option. Select install zip from sdcard, then select XT320_bootmenuV2.zip and select yes to install the zip file
6. Then reboot device by selecting reboot device now.
CWM 6 has a bug where it asks you to 'disable recovery flash' when you select reboot system now make sure you select NO or you will soft brick your device.
Changelog:
-v2 No need to mount /sdcard in CWM Recovery. Fixed TWRP installation issues.
-v2.0.1 Released an .exe version of script, to simplify installation
-v2.0.1.1 Fixed bootmenu.zip

This can install a custom recovery?

This can install a custom recovery?

Thank you
The root process worked for me. Now i can install link2sd and set up a swap partition.
I cant install TWRP and i think the reason is that the bat was having some problem to send that bootmenu.tar file to my sd card. I tried to send that file myself before starting the entire process and it didnt worked.
I took a picture of the error i'm getting . Thank you again, i was really mad about that low internal space xD

same problem... someone can fix it? please

fca.sjc said:
The root process worked for me. Now i can install link2sd and set up a swap partition.
I cant install TWRP and i think the reason is that the bat was having some problem to send that bootmenu.tar file to my sd card. I tried to send that file myself before starting the entire process and it didnt worked.
I took a picture of the error i'm getting . Thank you again, i was really mad about that low internal space xD
Click to expand...
Click to collapse
sfoot13 said:
same problem... someone can fix it? please
Click to expand...
Click to collapse
Ok, I've made a fixed script here. The error was that the sdcard is a directory so it will refuse to push files into it.
Here's the updated script below. Just put the .bat file in the same place as the other files.

Thanks
rootdefyxt320 said:
Ok, I've made a fixed script here. The error was that the sdcard is a directory so it will refuse to push files into it.
Here's the updated script below. Just put the .bat file in the same place as the other files.
Click to expand...
Click to collapse
Ty for the quickly answer.
Btw, my gsm network wasnt working after the root process. If the same thing happens to someone else, just do a master reset and it will work again.

pull command is working now
That sdcard copy part is working now. The TWRP process is still not working for me. I tried to do myself the commands using the adb interface and when i use the command to intall the tar, i got the message 'tar: no space left on device" . I hope you can help me with that and i'm sorry about all this questions xD .

fca.sjc said:
That sdcard copy part is working now. The TWRP process is still not working for me. I tried to do myself the commands using the adb interface and when i use the command to intall the tar, i got the message 'tar: no space left on device" . I hope you can help me with that and i'm sorry about all this questions xD .
Click to expand...
Click to collapse
You must have more than 5MB free in your /system partition. Please move your apps to the /flex partition or delete the useless apps in /system.

rootdefyxt320 said:
You must have more than 5MB free in your /system partition. Please move your apps to the /flex partition or delete the useless apps in /system.
Click to expand...
Click to collapse
Thank u so much to everyone who make it possible xD
(can i do now a overclock to 720 without problems?)

sfoot13 said:
Thank u so much to everyone who make it possible xD
(can i do now a overclock to 720 without problems?)
Click to expand...
Click to collapse
Yes but it sometimes gets unstable so you should overclock to 700MHz which is the highest I got without reboots. pll2_l_val=73 gives you 700MHz.

rootdefyxt320 said:
Yes but it sometimes gets unstable so you should overclock to 700MHz which is the highest I got without reboots. pll2_l_val=73 gives you 700MHz.
Click to expand...
Click to collapse
Thank u so much and TWRP doesn't work xD i have 8.5 mb free on system but it can't create the folders on bootmenu

sfoot13 said:
Thank u so much and TWRP doesn't work xD i have 8.5 mb free on system but it can't create the folders on bootmenu
Click to expand...
Click to collapse
I've released an .exe version of my script. This should work now .
Link: http://www.mediafire.com/?0kwmx4whjj1ua8c

Thank u bro and sorry but i can't overclock it to 700 =/

i installed TWRP but it doesn't work and when i turn on my mobile it freezes on home screen :/ is a mess.... it's possible install it via recovery (temportal CWM)?

OFF TOPIC.
Congrats on your well deserved mention on the portal.

sfoot13 said:
i installed TWRP but it doesn't work and when i turn on my mobile it freezes on home screen :/ is a mess.... it's possible install it via recovery (temportal CWM)?
Click to expand...
Click to collapse
It worked for others but in your situation the only thing I can advise is to do a data wipe and relfash SBF file. Just go to Guitwo2's there to install permanent CWM.
Link: http://forum.xda-developers.com/showthread.php?t=2229233

rootdefyxt320 said:
It worked for others but in your situation the only thing I can advise is to do a data wipe and relfash SBF file. Just go to Guitwo2's there to install permanent CWM.
Link: http://forum.xda-developers.com/showthread.php?t=2229233
Click to expand...
Click to collapse
:good: Working! Thank u so much, now i have CWM working on my defy mini, i'm really thankful, thanks again

Hi, it's me again... i have a new trouble
i installed the xt320_bootmenu.zip (from this thread http://forum.xda-developers.com/showthread.php?t=2229233) the first time that i rebooted works fine, but the on the second reboot it doesn't work, then i went to data to check if test.log was there and here's the problem... no test.log...
init.d was working fine until that i did it, i guess that my phone have troubles making work init.d
some solution for this annoying guy? thanks in advance!

sfoot13 said:
Hi, it's me again... i have a new trouble
i installed the xt320_bootmenu.zip (from this thread http://forum.xda-developers.com/showthread.php?t=2229233) the first time that i rebooted works fine, but the on the second reboot it doesn't work, then i went to data to check if test.log was there and here's the problem... no test.log...
init.d was working fine until that i did it, i guess that my phone have troubles making work init.d
some solution for this annoying guy? thanks in advance!
Click to expand...
Click to collapse
Looks like 97bootmenu deleted itself, please reinstall the CWM zip again and it should work.

Full Root for Sony Xperia M c1904 & c1905 models on JB 4.1

UPDATED INSTRUCTIONS 23/3/2014
Thought I would share this for anyone that's looking for a complete and full root of this phone, this is not my work I was given these instructions for full root of Sony Xperia M Phone by member xzn credits go to him and others mentioned within method here is the method as follows
- FULL ROOT XPERIA M -
material
- Download Framaroot 1.5.3(http://www.2shared.com/file/x5aus8Wd/comalephzainframaroot_153.html?)
- Busybox Pro v9.7.3 (http://www.2shared.com/file/gPQlU2-Q/BusyBox_Pro_9_7_3.html?)
- Busybox Free (https://play.google.com/store/apps/details?id=stericson.busybox)
- Tool By Anto Kus (download here http://www.2shared.com/file/e9sDTGJk/rootfixer.html?)
- some snacks and soda
steps
1. Install framaroot 1.5.3 ,open , then select install supersu, then select gandalf, if its failed, try, try n try until success notification appear and ask to reebot,your phone will reboot, after your phone on again , look for supersu app in menu , if supersu not appear in menu try,try n try again until supersu appears
2. Install BusyBox Pro v9.7.3 , if busybox ask for backup, select yes, then busyboz will loading, after 100%, MAKE SURE BUSYBOX IS INSTALLED IN SYSTEM/XBIN select install, select normal install, after success,reboot your XM
up here, Your phone was half rooted (what is half rooted? its mean that your phone can not edit system file, if you try to edit your system file your XM will sudden reboot) (THIS STEP IS SO YOU CAN CREATE A BACKUP OF YOUR SYSTEM SETTINGS BEFORE BUSYBOX IS INSTALLED BUT IF YOUR NOT BOTHERED ABOUT A BACKUP THEN YOU CAN SKIP INSTALLING THIS BUSYBOX VERSION AND DOWNLOAD THE BUSYBOX FREE AND USE THAT ONE TO INSTALL THE LATEST VERSION STRAIGHT AWAY)
3. eat your snack and drink your soda, stay relax 
4. Extact Tool by Anto Kus to your pc (you will get superuser.bat and supersu.bat), then connect your XM (connect by msc and you must have install pcc on your pc), then run supersu.bat when prompted grant root access on phone
your xm will reboot
Once phone reboots wait for pc to detect phone again then finish supersu.bat then unplug device, MAKE SURE TO RERUN THE. bat FILE AGAIN AFTER FIRST REBOOT TO DOUBLE CHECK THAT THE REBOOT FIX HAS BEEN INSTALLED CORRECTLY, BEFORE RUNNING THE SCRIPT AGAIN AFTER PHONE HAS BEEN DETECTED BY THE PC UNPLUG THE PHONE THEN RERUN THE .bat FILE.
5. DOWNLOAD THE LATEST BUSYBOX FREE FROM PLAY MARKET AND LET SMART INSTALL FINISH LOADING, ONCE LOADED SELECT LATEST BUSYBOX VERSION (CURRENTLY AT V1.22.1-stericson) AND MAKE SURE ITS INSTALLED IN SYSTEM/XBIN. ONCE INSTALLED REBOOT PHONE THEN YOUR DONE
Credit to
- Xzn
- Anto Kus
- Hendrico Andre and Muhammad Arif
from Sony Xperia M Indonesia :highfive:
EXTRA
1: BUSYBOX MUST BE INSTALLED TO SYSTEM/XBIN TO WORK IF NOT AND SYSTEM/BIN IS SELECTED THE PHONE WILL REBOOT AND BUSYBOX WILL NOT BE INSTALLED
2: ALL DRIVERS MUST BE INSTALLED ADB ETC...
3: USB DEBUGGING AND MSC MUST BE SELECTED AND TURNED ON
HOW TO UNROOT LONG VERSION:
*only if you used busybox pro*
1. go into busybox and click on restore, let it do its job. A confirmation popup will appear
2. Go into supersu>settings and scroll down to unroot, click it and let it finish
3. Reboot device (NOTE IF YOU'VE RESTORED VIA BUSYBOX THEN SYSTEM WILL BE VERY LAGGY)
4. Go into settings and carry out a factory reset to clear the device fully.
HOW TO UNROOT SHORT VERSION:
1. Refresh stock firmware via flashtool and select wipe cache and wipe data
2. Let device boot up, can take upto 5+ minutes to boot up.
Sent from My Sony Xperia M C1905

Indeed anyone tried binary4u?

Thanks for this detailed guide..

I have problem ( or better - my brother ) after succesfull root, run rootfixer, but thats not fix anything... phone still rebooting if i want change some in /system ...please help

icoolguy1995 said:
Indeed anyone tried binary4u?
Click to expand...
Click to collapse
Did you install busybox I have tried and tested this method several times and never had any problems follow instructions closely
Sent from my C2005 using xda premium

Ignore the quote as xda app giving me.issues and not selecting the correct post to quote
Sent from my C2005 using xda premium

yes, installed... (and backed up, and wait for 100% loading, then install - normal)
i folowed closely, and still have problem.

Installed busybox to system/xbin?
Sent from my C2005 using xda premium

dont know... but when i now open busybox pro, its pointing to system/bin ...So you think i have to change destination to xbin and install it again ?

Install busybox to system/xbin
You'll get a confirmation screen saying busybox has been installed successfully then reboot your phone once booted up rerun root fix for the superuser app you installed then once phone has booted up again try then
Sent from my C2005 using xda app-developers app

Any luck did that work?
Sent from my C2005 using xda app-developers app

Many THANKS !!! It working now !!!

mmm273 said:
Many THANKS !!! It working now !!!
Click to expand...
Click to collapse
Not a problem I'll try and update that section of the guide
My xda app is playing up everytime I click on original post it FC. I'll try on my laptop
Sent from my C2005 using xda app-developers app

Hello
I have installed supersu, and BusyB to xbin and after running supersu.bat (xm is connected in msc mode and pcc is installed correctly) i have that message like on scrrenshot and nothing happens

new version
delete:

Im using framaroot 1.6.0 (even 1.6.1 is out there) and its hals rooting my device (like in the guide)
After all operations i cant edit system files :crying:
Do i have to turn on USB Debugging ? Its not mentioned in the guide but i find it in this thread
http://forum.xda-developers.com/showthread.php?t=2450265
Im asking because i cant check it since 7 pm

i cannot access the server to the tool by anto kus
can anyone provide mirror for that link
thanks

Found it usb debugging needs to be enabled for root fix so enable it
I'll upload the tool when I get in from work I have it on my laptop
Sent from my C2005 using xda premium

aser44 said:
Hello
I have installed supersu, and BusyB to xbin and after running supersu.bat (xm is connected in msc mode and pcc is installed correctly) i have that message like on scrrenshot and nothing happens
Click to expand...
Click to collapse
Make sure USB debugging is enabled and that PCC has installed the drivers. It didn't work for me either but after PCC installed the drivers it found my device.
This message was brought to you by my Sony Xperia M (C1905), using the XDA app.

OK, finally it worked. Everything like in the guide + enabling USB Debugging

[Q] BenQ B50 Can Root it ?

sorry , My english is poor
The Phone Can Root it?
i won't use 1 key root , because 1 key root APP , too many have virus and Crash APP
my phone is BenQ B50 LTE , 1G ram / 8G rom .
dual sim
dump two IMG Files
Boot.IMG And Recovery.IMG
here:
Recovery
https://mega.co.nz/#!Q8t02Y4R!ZsDU9OqNotu0jETJ3VmscgNeC8wHnFPWEoBu5ygvZck
Boot
https://mega.co.nz/#!U01TGbbC!Z14cU91HyGNRpKQ53x6mDiXx2Rq8q7zqKfCKujp8ON8
Two Image
if need dump more IMG , i'll upload files

Use iRoot/VRoot then change to SuperSU . No virus if use Vroot except it install a china app store but after downloading SuperSU it will uninstall the Vroot Superuser and also the china app store. We use this with 98% success rate on phones in Asia.

cracktech said:
Use iRoot/VRoot then change to SuperSU . No virus if use Vroot except it install a china app store but after downloading SuperSU it will uninstall the Vroot Superuser and also the china app store. We use this with 98% success rate on phones in Asia.
Click to expand...
Click to collapse
Thanks,
I Use VRoot , can root it
but supersu binary out of date in other SuperUser App
else only Default VRoot SuperUser APP ?

Can u confirm this is your model? http://www.benq.com.tw/product/smartphones/b50/specifications/ . If it is MTK SoC it is very easy for me to help you.
First -Dont worry about the "su" binary needs to be updated. YOu do this first 1- install Mobile UncleTools (from Playstore) 2. download the CWM recovery (from the link I give you and copy to sdcard , 3- Select "Update recovery from MobileUncleTool - search for the CWM Recovery and answer "yes". 4- Check recovery has been installed (Vol+/Vol- plus Power button OR from within MobileUncleTool you can select "reboot into recovery") 5. Download and copy "ROOT_MTK.zip" to sdcard and from CWM select "install" . F I N I S H!!
Your phone is now rooted with SuperSU 2.46 plus busybox and no future problems with "su" binary update.
Please go to this link to select all the files necessary to do this : CWM recovery/ ROOT_MTK/ : :removed link

cracktech said:
First -Dont worry about the "su" binary needs to be updated. YOu do this first 1- install Mobile UncleTools (from Playstore) 2. download the CWM recovery (from the link I give you and copy to sdcard , 3- Select "Update recovery from MobileUncleTool - search for the CWM Recovery and answer "yes". 4- Check recovery has been installed (Vol+/Vol- plus Power button OR from within MobileUncleTool you can select "reboot into recovery") 5. Download and copy "ROOT_MTK.zip" to sdcard and from CWM select "install" . F I N I S H!!
Your phone is now rooted with SuperSU 2.46 plus busybox and no future problems with "su" binary update.
Please go to this link to select all the files necessary to do this : CWM recovery/ ROOT_MTK/ :
Click to expand...
Click to collapse
Yes , My Phone is model.
First , Very Thank You To Help me
Because of My phone was returned for repair.
The main reason for failure camera options
I am waiting for the phone to come back
I will do it
Very thanks you , Again .

cracktech said:
Can u confirm this is your model? ]
Click to expand...
Click to collapse
My phone has return
I Try it. it can Root ,thank you!
I use MTK_ROOT.zip File , But this File was install some app ?

Yes MTK_ROOt installs additional apps for MTK users only!
jackyui said:
My phone has return
I Try it. it can Root ,thank you!
I use MTK_ROOT.zip File , But this File was install some app ?
Click to expand...
Click to collapse
Yes it does but not SPYWARES! NTPSync is for you to get very fast GPS satellites lock (please add the 2 digit "XX.pool.ntp.org" XX= your current country e.g. "cn" =China , "tw"=Taiwan, "de"=Germany. MTK Suite is for you to do backup of IMEI process and Download of "ETO.db" also for GPS. just press download "eto" only 3-4 seconds and then "install" . "QuickExit" is for you to use when an app is frozen and you cannot exit the app , just swipe down from top task bar tap on QuicExit. It will exit the app.
If you dont want them since you have already "Rooted" you can "uninstall" them by using any "root uninstaller". Goodbye.

cracktech said:
Yes it does but not SPYWARES! NTPSync is for you to get very fast GPS satellites lock (please add the 2 digit "XX.pool.ntp.org" XX= your current country e.g. "cn" =China , "tw"=Taiwan, "de"=Germany. MTK Suite is for you to do backup of IMEI process and Download of "ETO.db" also for GPS. just press download "eto" only 3-4 seconds and then "install" . "QuickExit" is for you to use when an app is frozen and you cannot exit the app , just swipe down from top task bar tap on QuicExit. It will exit the app.
If you dont want them since you have already "Rooted" you can "uninstall" them by using any "root uninstaller". Goodbye.
Click to expand...
Click to collapse
BenQ B50 , Never backup ROM And Reboot Option Select "Yes" in CWM
Because it will only front camera lens :crying:

The easiest way to get root and recovery on T2 ultra dual {5.1.1} {.182}

My this post may be considered as a sequel to my previous post about the easiest way to root t2 ultra dual {.472} {5.0.2}
Now the way to root our t2 ultra dual {5.1.1} {.182}:
Download the ftf file of latest firmware 19.4.A.0.182 (search on google)
Download latest version or V 0.8 of prf creator (search on google and get xda link)
Download SuperSU.zip (search on google)
Now put the prf creator somewhere in your PC (let's say on desktop) extract it there.
Add ftf file and superSU.zip in prf creator
Mark all the boxes on right side of prf creator window
Hit create. In 15-20 minutes you will get a zip file named "flashable" in prf folder
Copy this flashable zip and put it in root of SD card of your phone.
Now reboot your phone in recovery
after rebooting into recovery, follow in sequence:
Wipe
Advanced wipe
select:
cache
dalvik
system
data
internal memory
swipe to wipe
go back to recovery home
tap install
select external sd card
select that flashable zip
swipe to flash
wipe dalvik
reboot to system.
To install recovery:
Download latest nut's xzdr installer zip
Put it somewhere in your computer
Extract it, you will get a folder of same name
Connect your phone to pc in USB debugging mode
Open the extracted folder
Double click the windows installer batch file
Grant superuser access on your phone's screen
Follow the instructions on terminal
(press 1 on your pc as you have SuperSU in your phone)
After successful instalation of recovery, your phone will reboot into recovery.
Reboot the phone into system
.
.
Now you have a rooted 5.1.1 D5322 with latest Dual recovery.

This is not even close to simple dude..
This is what i did to root :
1. Copy SuperSU to sdcard
2. Flash DUAL_RECOVERY_D5322-LP.img
3. Install supersu then power off
4. Open flashtool and Flash STOCK KERNEL 5.1.1 ONLY KERNEL
5. REBOOT & VIOLA

there are few additions required for noob like me
To make work this method
Requirement :
Rooted D5322 with 4.x.x or 5.0.1 & working recovery installed.
To install recovery:
make sure that you have :
Enabled USB debugging
Enabled Unknown sources

r2rdcroix said:
This is not even close to simple dude..
This is what i did to root :
1. Copy SuperSU to sdcard
2. Flash DUAL_RECOVERY_D5322-LP.img
3. Install supersu then power off
4. Open flashtool and Flash STOCK KERNEL 5.1.1 ONLY KERNEL
5. REBOOT & VIOLA
Click to expand...
Click to collapse
When you tick all the boxes in prf creator, kernel gets added.
Sent from my D5322 using XDA Forums Pro.

rrd84 said:
there are few additions required for noob like me
To make work this method
Requirement :
Rooted D5322 with 4.x.x or 5.0.1 & working recovery installed.
To install recovery:
make sure that you have :
Enabled USB debugging
Enabled Unknown sources
Click to expand...
Click to collapse
Yeah I already said it's a sequel to my first post. In which you would see how to root D5322 on 5.0.2, and ofcourse recovery is needed. Thanks.
Sent from my D5322 using XDA Forums Pro.

Good work. But we know that this is not really easy. hehe

dropdan said:
Good work. But we know that this is not really easy. hehe
Click to expand...
Click to collapse
yeah!

Does this root 5.1.1 by 100%? Can we install Modded Play Store by this root method?

Need step by Step instructions please
Hello
I am a novice with many of the tools listed & the steps outlined, can somebody please help with step by step instructions,
maybe email me [email protected]
:good:

Thanks. For my XPERIA T2 ULTRA DUAL I had to made a change:
Instead of using the Recovery-Software you (rituraj_singh) offered I had to use the software (TWRP) recommended b abcdjdj in his post from 27th May 2014 ((D5322) Dual Recovery) on the XDA-Forum.
For the not-experienced Users of Androxyde Xperia Flash Tool: You can use the XperiFirm-Software (XI-Button in the Flash-Tool) and install the 5.0.1 (19.3.A.0.472)-Firmware from MELA Latin, but you have to overwrite also the Userdata and the Apps-Log, otherwise there are problems. After flashing use KingRoot to root your device, than replace kinguser using the batch-script of w0lfdroid.com (May 2015) placing the mrw-folder (included in the downloaded zip) on the intern memory (important) and executing it with Terminal Emulator. Than open SuperSu (installed by the script, not by you), and actualize the root-script. Afterwards reboot.
A Tip: After having installed the TWRP-Software on your phone you could have problems rebooting into the system, so prepare all and after having flashed the custom prf-rom on the device all would be function!

A step-by-step-Version (summary)
sachin.sachania said:
Hello
I am a novice with many of the tools listed & the steps outlined, can somebody please help with step by step instructions,
maybe email me [email protected]
:good:
Click to expand...
Click to collapse
Here comes a step-by-step-Version (summary) of all the "Posts"s needed for rooting Lollipop 5.1.1 on your Sony Xperia T2 Ultra (Dual).
The copyright is by the "Post"-authors like rituraj_singh and abcdjdj (I took the links to the posts nearby the description of the step) and by w0lfdroid.com, xperiafirmware.com and the software-producers.
I only wanted to create a step-by-step-summary. There is no garantuee which garantuees success using the summery! No responsability dad it does not destroy your mobilephone. Use it at your own risk! Thank you to the original "owners" of the posts. I hope the summary is ok for them! Otherwise contact me.
Time: maybe 1 hour or 2 hours
Tipp: if you until yet did not install Android 5.1.1 on your Xperia T2 Ultra Dual you do not have to follow the steps which are describing how to download the older Firmware via XperiFirm, but you should have installed the FlashTool just for the drivers (You won't use it directly). You can use the steps describing how to root the older Firmware using KingRoot, than continue with step 7.
1) Install the Androxyde FlashTool on your Computer: http://www.flashtool.net/downloads.php or found on the XDA-Forum, install the ADB-Packages (ADB, ADB-Drivers) on your Computer and make the ADB-Command part of the "path"-Variable of your Computers Terminal (see Google)
2) Install XperiFirm (cause easy for beginners): open the FlashTool and click on the "XF-button" near the "plus-in-a-square"-button and the "flash"-button.
3) After having installed the XperiFirm-Tool open it and click on "Xperia T2 Ultra (tianchi)" and select "D5322/XM50H (dual)"
4) Than click on the "Check-All"-Button over the Line "Latest Release"
5) Click on "MENA Latin" in the "Market"-Line and than on the "19.3.A.0.472 / R3C" and download it (having activated "unpack automatically")
6) Go to "xperiafirmware.com/8-firmware/58-sony-xperia-t2-ultra-dual-d5322" and download it (see chapter "1." on the website ), but do not flash it
7) Download the newest PRF-Creator (ZIP) from the following XDA-Forum-Link and unzip it: http://forum.xda-developers.com/crossdevice-dev/sony/tool-prfcreator-easily-create-pre-t2859904
8) Download the newest SuperSU-ZIP from chainfire (https://download.chainfire.eu/696/SuperSU). and paste the ZIP in the unzipped PRF-Creator-folder: https://download.chainfire.eu/696/SuperSU
9) Now copy the .ftf-file (Firmware) downloaded from xperiafirmware.com also in the unzipped PRF-Creator-folder and open the PRF-Creator.exe
10) The PRF-Creator asks for the .TFT-File (select the one you downloaded from xperiafirmware.com) and for the SuperSU-ZIP-File (select the one downloaded from chainfire)
11) Select in the "Include"-field: "Kernel"; "FOTA-Kernel"; "Modem" and "LTALable", also "Sign ZIP" and "Legacy Mode"
12) Click create and wait until finished
13) Copy the created "flashable-prerooted.zip" from your unzipped PRF-Creator-Folder to the external SD-Card of your Device
14) BackUp your mobilephone using the "Sony PC Companion" or simular software like Wondershare's "MobileGo"
14a) Control if you have unlocked your Boatloader (normally it's locked) and if it's locked, go to the "Sony Mobile Developers Unlock Bootloader Website" and follow the instructions there Important: You could have to install ADB and Sony's ADB-Drivers (find ADB using google) and the Sony FlashTool "Emma" will not work with the Xperia T2 Ultra Dual
15) Shut down your phone and start it holding the "Volume-down"-Button while plugging in the USB-Cable (it won't show more than a black screen)
16) Close "XperiFirm", wait until it finished and then click on the "Flash"-Button and select in the new window "Flashmode" and "OK" (obviously)
17) Select the Firmware you downloaded before with XperiFirm (19.3.A.0.472) and select in the "Wipe"-Field: "APPS_LOG" and "USERDATA" (!!!important!!! otherwise problems)
18) Click on the "Flash"-Button and wait until it's done (sometimes the flashtool has problems with the files - dont worry: shutdown the FlashTool and retry it once more)
19) Unplug the mobilephone from the USB-Cable, start it and follow the instructions
20) After having prepared the mobilephone go to "kingroot.net/wap/download" and download KingRoot (sometime trouble with the site, try it once more)
21) Afterwards enable the DeveloperMode (settings - About Phone - click "build number" 7 times) and enable the "unknown sources" (settings - Security - unknown sources)
22) Install KingRoot and root your Xperia T2 Ultra Dual
23) Install "Terminal Emulator" from the Google Play-Appstore to your device and open it
24) Go to "http://www.w0lfdroid.com/2015/05/How-to-Remove-Replace-KingUser-KingRoot-with-SuperSU.html" and download the newest "Replace KingUser with SuperSU.zip" and unpack it to your device's intern memory (!!!important!!! otherwise no function)
25) In the Terminal Emulator App enter "su" for gaining "root"-access ("Enter" obviously), than enter "sh /sdcard/mrw/root.sh" and wait until it finish (it will open SuperSU)
26) Actualize the file as requested by SuperSU and, after having had success, reboot your mobilephone
27) Install a Root-Checker-App from Google Play Store and control, if you see a window from "SuperSU", otherwise repeat the last steps
28) Go to "https://goo.gl/lg6I2t" or visit directly the XDA-Forum-Post of abcdjdj (http://forum.xda-developers.com/showthread.php?t=2764408) and download his "TWRP-KK-T2_DUAL-V3.img" or newer
29) Shut down your mobilephone. Afterwards hold the "Volume-Up"-Button while plugging in the USB-Cable (it shows only a black screen) and connect it to the Computer
30) Check if you have installed all fastboot drivers for your device, then open the "Command Line" of your Computer "as Administrator" and enter: "fastboot flash boot (path-to-the-file-downloaded-in-the-last-step)/TWRP-KK-T2_DUAL-V3.img" and click obviously "Enter"
31) Now unplug your mobilephone, than hold the "Volume-down"-Button and the "Power"-Button at the same time: TWRP-Recovery will start
32) Select "Wipe", than "Advanced Wipe", than select "intern. memory", "dalvik", "cache", "data" and "system"
33) Swipe to Wipe
34) Go to TWRP's home (twice times the "back"-Button) and select "Install", than "external SD-Card" and select "flashable-prerooted.zip" and confirm the warning, than SWIPE to INSTALL (flashing)
35) Wipe the Dalvik-Cache
36) Reboot into System and follow your mobilephone's instructions
37) Install a Root Checker App from Google Play Store and control if it's rooted, afterwards install the backup of your mobilephone made at the beginning
38) Install "Titanium Backup" and disinstall (after having done a backup of the app you want to delete) Apps you do not want
39) Install "Link-to-SD" from GooglePlay, prepare your external SD-Card with a partition manager (using your Computer) and copy all possible apps completly to the SD-Card

This works on T2 ULTRA D5306 Single SIM
theokon said:
Here comes a step-by-step-Version (summary) of all the "Posts"s needed for rooting Lollipop 5.1.1 on your Sony Xperia T2 Ultra (Dual).
Click to expand...
Click to collapse
Well my friend, first at all, this is a awsome guide, it really help me to load the 5.1.1 on my SP. I Must said that even if this looks
overwhelming at the begining, it's pretty easy to do it.
Just for the FeedBack, this method works in:
T2 Ultra D5306 Single SIM, TELCEL.
I use the US CUSTOM Stock ROM 5.1.1 ( 19.4.A.0.182 ), if ask for the FTF, look at the FTF MEGAPOST.
Thanks to @rituraj_singh for find this method and @theokon to make the Easy-Mode Guide.
This thread must being Sticky.
PS: You have to add one step: When you reboot after the Flash, it can take a while in start the smartphone, It is to prevent panic if they see it takes a lot time to start, they might think it is bricked and try to restart it. :good:

This works great for rooting the phone (D5322) but for me link2sd doesn't read the 2nd partition and keeps giving me unable to mount errors.

virgilone2 said:
This works great for rooting the phone (D5322) but for me link2sd doesn't read the 2nd partition and keeps giving me unable to mount errors.
Click to expand...
Click to collapse
You got the error when you try to mount on /dev/block/mmcblk1p2 ? it and said that the mount fail?
I had that error as well, maybe you have to try this @virgilone2:
1.- Uninstall the Link2SD.
2.- Install the SD MAID and run it, clean it up.
3.- Reinstall the Link2SD.
4.- Install the Recovery (I use this) [ XZDualRecovery 2.8.21 ] or the same you use in the guide.
5.- Run the Recovery, and go to Wipe > Advance Wipe > Davik Cache, Swipe to Wipe, after it ends go to Reboot > System.
6.- Before your smartphone start as usual, going to pop one little window with a counter, wait to end (Maybe take a while).
7.-Run you Link2SD, it have to Mount the ext2 partition and ask for reboot, if isnt the case, just recreate the mount script.
8.- Enjoy your Link2SD in Lollipop 5.1.1 :good:
This works for me, i hope works for you as well

Windows 10 Driver Problems
When having updated to Windows 10 driver problems could happen.
When entering "fastboot devices" in your computer's terminal and nothinh happens it is like this.
You can solve this easily:
1) Plug in your phone in fastboot mode into the computer (Volume Up + Plug-In of the USB-cable)
2) Go to the"Devices manager" (or called simular, as I don't know how to translate it correctly), where you will find the unknown S1 fastboot driver.
3) Download the official Sony flashing tool "EMMA" and reinstall the "Android Studio" in order to get the correct drivers
4) For security download also the "Universal ADB Drivers Package" from chip.de and install it
5) Back in the Device Manager reinstall the correct driver selecting it from the drivers list (!): Sony SA0110 - ADB Interface driver

rituraj_singh said:
My this post may be considered as a sequel to my previous post about the easiest way to root t2 ultra dual {.472} {5.0.2}
Now the way to root our t2 ultra dual {5.1.1} {.182}:
Download the ftf file of latest firmware 19.4.A.0.182 (search on google)
Download latest version or V 0.8 of prf creator (search on google and get xda link)
Download SuperSU.zip (search on google)
Now put the prf creator somewhere in your PC (let's say on desktop) extract it there.
Add ftf file and superSU.zip in prf creator
Mark all the boxes on right side of prf creator window
Hit create. In 15-20 minutes you will get a zip file named "flashable" in prf folder
Copy this flashable zip and put it in root of SD card of your phone.
Now reboot your phone in recovery
after rebooting into recovery, follow in sequence:
Wipe
Advanced wipe
select:
cache
dalvik
system
data
internal memory
swipe to wipe
go back to recovery home
tap install
select external sd card
select that flashable zip
swipe to flash
wipe dalvik
reboot to system.
To install recovery:
Download latest nut's xzdr installer zip
Put it somewhere in your computer
Extract it, you will get a folder of same name
Connect your phone to pc in USB debugging mode
Open the extracted folder
Double click the windows installer batch file
Grant superuser access on your phone's screen
Follow the instructions on terminal
(press 1 on your pc as you have SuperSU in your phone)
After successful instalation of recovery, your phone will reboot into recovery.
Reboot the phone into system
.
.
Now you have a rooted 5.1.1 D5322 with latest Dual recovery.
Click to expand...
Click to collapse
worat guide i ever seen in xda !!
no links !!

manojkumar8552 said:
worat guide i ever seen in xda !!
no links !!
Click to expand...
Click to collapse
Well thanks!! Links needed to perform the steps suggested are everywhere in the realm of Internet. Uploading same thing again and again is waste of space,data and everything. Hope you understand.
Ftf can be downloaded through xperi-firm and recovery can be downloaded from nut's Xperia files website. SuperSU is already available in more than 1000 places on Internet. And prf creator is created by a certain developer which is already available on xda. So reposting his item might be considered as kinda theft/plagiarism. And this is already mentioned in this post that it's a sequel of previous post. So please do your own bit of work/home work before posting negative comments.
Sent from my D5322 using XDA Forums Pro.

I did My HW. and that Why i m Saying You.
My one Frnd dont get anything from this Thread.
He is just trying to ROot.And says what the hell is going on thRead.
People Are Not Expert That You Are.
so make little comfortable Thread plz.
Sent from my Moto G 2014 using Tapatalk

manojkumar8552 said:
I did My HW. and that Why i m Saying You.
My one Frnd dont get anything from this Thread.
He is just trying to ROot.And says what the hell is going on thRead.
People Are Not Expert That You Are.
so make little comfortable Thread plz.
Sent from my Moto G 2014 using Tapatalk
Click to expand...
Click to collapse
This post is a sequel of previous post. To perform the steps mentioned you need to be on earlier versions of Android. Like 5.0.2 or earlier. And recovery must be installed in that. If you're on 5.0.2 follow my post about how to root on 5.0.2.
Sent from my D5322 using XDA Forums Pro.

manojkumar8552 said:
I did My HW. and that Why i m Saying You.
My one Frnd dont get anything from this Thread.
He is just trying to ROot.And says what the hell is going on thRead.
People Are Not Expert That You Are.
so make little comfortable Thread plz.
Sent from my Moto G 2014 using Tapatalk
Click to expand...
Click to collapse
Well.. You can use KingRoot v 4.5.2*to root 5.1.1 and for SuperSU follow my previous post.
Sent from my D5322 using XDA Forums Pro.