Alright so I'm sure everyone who has the leather back and has not put a cover on it yet can see that the leather back is getting dirty.
It might be just me but i have the brown leather back. The stitches have gotten blackish and not white like they were in the beginning and the back just keeps getting a darker shade!
Any of you guys try to clean it? If so how'd you do it?
Is it okay to take the back off and clean it under water?
Or should i use windex.
I don't wanna ruin the leather attempting to clean it!
Areebkhan said:
Alright so I'm sure everyone who has the leather back and has not put a cover on it yet can see that the leather back is getting dirty.
It might be just me but i have the brown leather back. The stitches have gotten blackish and not white like they were in the beginning and the back just keeps getting a darker shade!
Any of you guys try to clean it? If so how'd you do it?
Is it okay to take the back off and clean it under water?
Or should i use windex.
I don't wanna ruin the leather attempting to clean it!
Click to expand...
Click to collapse
DO NOT USE WINDEX OR RUN WATER. That will ABSOLUTELY ruin your leather.
I bought a cheap bottle of leather treatment from CVS for about $6. You spray two coats on it, and you're good to go. It actually gave the leather a nice, grippy-er, feel. And it helps protect from wetness. After that, you should be able to use any type of leather cleaner to keep it looking fresh.
chadbot3k said:
DO NOT USE WINDEX OR RUN WATER. That will ABSOLUTELY ruin your leather.
I bought a cheap bottle of leather treatment from CVS for about $6. You spray two coats on it, and you're good to go. It actually gave the leather a nice, grippy-er, feel. And it helps protect from wetness. After that, you should be able to use any type of leather cleaner to keep it looking fresh.
Click to expand...
Click to collapse
HAHAHA!!
THANK YOUU!
I knew it was good to ask before doing something!
So cleaning it with that leather treatment gives it the shine back aswell?
chadbot3k said:
DO NOT USE WINDEX OR RUN WATER. That will ABSOLUTELY ruin your leather.
Click to expand...
Click to collapse
chadbot3k said:
DO NOT USE WINDEX OR RUN WATER. That will ABSOLUTELY ruin your leather.
Click to expand...
Click to collapse
chadbot3k said:
DO NOT USE WINDEX OR RUN WATER. That will ABSOLUTELY ruin your leather.
Click to expand...
Click to collapse
Quoted for emphasis. Definitely a very good thing that the OP asked.
I use Meguiar's Gold Class Rich Leather Aloe Cleaner followed by Meguiar's Gold Class Rich Leather Aloe Conditioner. Yes, I do my own auto detailing, and yes, I hate it when people use cleaners inappropriately and screw up whatever they were trying to clean. My parents are seriously guilty of that and it left me with cleaning-related faux-PTSD flashbacks decades later.
The G4's back wasn't shiny from the factory, but certain cleaners will produce a slight matte sheen on the leather.
Areebkhan said:
HAHAHA!!
THANK YOUU!
I knew it was good to ask before doing something!
So cleaning it with that leather treatment gives it the shine back aswell?
Click to expand...
Click to collapse
Yes, it will keep your leather back looking mostly new. Most importantly it will protect against getting wet, which will stain your leather.
Any kind of leather treatment that adds a "shine" is no good in my eyes. I have had a few european luxury cars and i can tell you this...best thing i have ever used to clean my seats and other areas has been...BABYWIPES!!
Seriously it does not take away from the natural state or satin look of the leather and actually clean it very well. If it good enough for your babys ass.....its good enough for the skin on your phone!
You dont have to take my word for it though.
BTW got it wet today. there was a slight dark spot for a fe minutes but went away fully
Snakecharmed said:
I use Meguiar's Gold Class Rich Leather Aloe Cleaner followed by Meguiar's Gold Class Rich Leather Aloe Conditioner. Yes, I do my own auto detailing, and yes, I hate it when people use cleaners inappropriately and screw up whatever they were trying to clean. My parents are seriously guilty of that and it left me with cleaning-related faux-PTSD flashbacks decades later.
The G4's back wasn't shiny from the factory, but certain cleaners will produce a slight matte sheen on the leather.
Click to expand...
Click to collapse
These kinds of products are unavailable outside the US so we need alternatives.
What do you make of the advice given in this video ?
House hold items available in any country.
white vinegar to clean
shaving foam to remove ink stains
corn starch to remove grease
From the user manual
This product is made of cattle hide and may have different creases and patterns due to the properties of natural leather. If the product gets wet with any liquid (water, soda, seawater, rain, sweat, sunscreen, cosmetics, moisture, etc.), it may lose colour, change colour, or deform in shape.
When this product gets wet or contaminated, get rid of the water by pressing it gently with a dry towel, or wipe it with leather cream and leave it to dry in shade. When the product is exposed to a wet environment for a long time, it may cause creases or mould. The shape of the leather may not be restored to its original state after cleaning because of the properties of leather, and any contamination or deformity may get worse when using regular detergent or an organic solvent.
When the leather is wet with rain or sweat, use caution and avoid contact with clothes. It can cause any dye to become a stain.
Due to the nature of leather, friction for long periods of time or excessive force may damage the surface of the leather.
Click to expand...
Click to collapse
This is an important thread or there's going to be a few unhappy people later on.
I used new baseball glove condtioner.
Sent from my VS986 using XDA Free mobile app
what i got is you need a cleaner and then a conditioner.
the cleaner to remove stains and a conditioner to maintain the material.
Mr clean magic eraser to clean it. That's what we use in the automotive detailing world
Sent from my LG-LS980 using Tapatalk
I don't know how I feel about the advice in the video. Those suggestions are very common, but I haven't tried them personally. People have conflicting things to say about the extreme acidity of vinegar against the mild acidity of leather, which is why you need to dilute the vinegar in the first place. One alternate suggestion I've read is to use Woolite 10:1 to 6:1 (water:Woolite). Another I've read is Dove soap. Don't use saddle soap, which has a pH level way too basic for leather cleaning.
What I can say is that you should use a soft terry or microfiber cloth to apply the cleaning solution, then wipe it off with a dry cloth. Don't apply a solution directly to the leather and don't apply too much at once. Even the moisture from a water-dampened cloth isn't the worst thing in the world if you're just quickly wiping on and off. Just don't soak the leather in anything, like running it under a stream of water. It's too porous to not absorb it. Once it's clean, condition it so you have some kind of protection from future stains.
As clichéd as this sounds, an ounce of prevention is worth a pound of cure. I'm not a super clean freak, but I try to keep my hands clean when I handle the G4. I don't touch the back of it while eating and I try to keep it away from beverages. However, I'm planning to get a plastic back for the G4 as my regular back cover and only use the leather occasionally.
Snakecharmed said:
I don't know how I feel about the advice in the video. Those suggestions are very common, but I haven't tried them personally. People have conflicting things to say about the extreme acidity of vinegar against the mild acidity of leather, which is why you need to dilute the vinegar in the first place. One alternate suggestion I've read is to use Woolite 10:1 to 6:1 (water:Woolite). Another I've read is Dove soap. Don't use saddle soap, which has a pH level way too basic for leather cleaning.
What I can say is that you should use a soft terry or microfiber cloth to apply the cleaning solution, then wipe it off with a dry cloth. Don't apply a solution directly to the leather and don't apply too much at once. Even the moisture from a water-dampened cloth isn't the worst thing in the world if you're just quickly wiping on and off. Just don't soak the leather in anything, like running it under a stream of water. It's too porous to not absorb it. Once it's clean, condition it so you have some kind of protection from future stains.
Click to expand...
Click to collapse
Thanks. Even with various leather cleaners around its a tricky affair to do it properly for the layperson. Not impossible. As long as one is aware.
As clichéd as this sounds, an ounce of prevention is worth a pound of cure. I'm not a super clean freak, but I try to keep my hands clean when I handle the G4. I don't touch the back of it while eating and I try to keep it away from beverages.
Click to expand...
Click to collapse
hehe, this advice will fall on deaf ears as its impossible to follow. Force of habit. it no secret that keyboards and touch screens contain more bacteria than toilet seats
However, I'm planning to get a plastic back for the G4 as my regular back cover and only use the leather occasionally.
Click to expand...
Click to collapse
Bingo! thats is the conclusion i'm reaching too. The idea of leather is fantastic but if you want to look good then be prepared to put in the work.
Leather is just not that practical for day to day in a phone usage scenario..
But it looks so good <sigh>
One of the things I've learned in both buffing/polishing and interior detailing is to not work too large of a surface area at once. You don't want to let a product set or dry before you can work on it. The product ends up being harder to remove and/or stains your surface.
When it comes to patina, the issue for me is that the leather surface is small, so any marks will be more visible. I look at my travel wallet, which I haven't used much, and I'm annoyed that there is wear on one of its corners and the color has rubbed off. I'm far less concerned about a scuff on the seat in my car. Still, I don't own any leather furniture because of the upkeep required.
There are photos one of the Android Central staff posted of a used brown leather Moto X. I don't think it looks bad, and if it came that way out of the box, I don't think anyone would have thought it was dirty. If you're like me though, you like keeping things looking like new. I'm getting better about conditioning or protecting new leather products before wearing them or breaking them in.
The black leather G4 cover would be much more forgiving with stains, but aside from lack of carrier availability, I only would have preferred that version if it had contrasting stitching.
Can someone point me in the right direction? I'm a complete noob at this and have no idea where to start. I was thinking of getting the leather honey conditioner from Amazon, but still wasn't sure if that would be appropriate. No clue where to begin on cleaners. I have the black leather back btw
xbayyx said:
Can someone point me in the right direction? I'm a complete noob at this and have no idea where to start. I was thinking of getting the leather honey conditioner from Amazon, but still wasn't sure if that would be appropriate. No clue where to begin on cleaners. I have the black leather back btw
Click to expand...
Click to collapse
I've had a bottle of Leather Honey since about 2000 (before they changed the name), and that's what I used on my leather back. It didn't darken the tan leather (unfortunately), though it did make it a bit sticky for a bit. If you go this route, apply it sparingly before going to bed.
Since this is a thread about cleaning, I feel obligated to mention that product is for protecting leather only, although I believe the same company makes a cleaning product as well.
Related
The best part is you all have one!
just get a dab of acetone and rub off the txt while driving text on the screen overlay that comes with the phone
it covers the phone exactly, is of heavy material, and if you clean it with some iKlear (or similar) it has a nice original glass feel
Is it as smooth or close to the actual glass of the screen?
For many people, the AT&T person ripped it off way before they got it.
i used that for a week or so but it still attracted a lot of fingerprints. plus if you hold the phone at an angle you can still see the outline of the text. i bought a $5 full body skin from ebay and it works great.
it sucks if they got rid of it, but it covers it edge to edge, and did you use acetone or nail polish remover?
while npr is technically acetone, it is heavily diluted. acetone you'd get at wally world or a paint shop (it's like 3-5 bucks) will completely remove it, no streaks or remnants (be a little liberal with the amount of acetone on the cloth)
I used iKlear after i dried off the acetone to give it a nice shine and feel. I did this all without even taking the thing off the phone. acetone is safe enough to not remove the clearcoated finish of the phone should it spill over.
YMMV but it seems like the best deal because it is free
I left mine on as well.
I ended up scraping it off with a rag, i can still see the remnants as well.
perhaps ill give it a good clean.
acetone you'd get at wally world or a paint shop (it's like 3-5 bucks)
YMMV but it seems like the best deal because it is free
Click to expand...
Click to collapse
good for a little chuckle...
Seriously though.. GREAT idea... I wish I would have been the one who thought of it. Mine still had it on too. I ended up using gadget guard full skin to get me to this point and will probably leave it on when I can get a good TPU case for it. I think Amzer is shipping theirs out tomorrow.
So I've got to give credit to the fine folks over at the Nexus S forum for giving inspiring the idea. I am a fan of keeping my phone caseless but I'm also a fan of keeping the scratches away. I bought a can of plasti dip in black and sprayed the back cover of the phone. The inside I sprayed 3 coats and the outside I believe 5. I held the can away from the cover about 15 inches while spraying for an even coat. Let it dry 30 mins between coats and sit 4-5 hours when I was finished just as the can said. It turned out great as you can see and now has a scratch proof rubberized cover. The rubber simply peels off if I ever want to remove it.
Looks good, not a bad idea at all. You say you sprayed the inside of the cover as well? Wouldn't think you would need to bother with the inside, why did you cover the inside. Take care.
smsparks said:
Looks good, not a bad idea at all. You say you sprayed the inside of the cover as well? Wouldn't think you would need to bother with the inside, why did you cover the inside. Take care.
Click to expand...
Click to collapse
I sprayed the inside as well so it wouldn't start to peel on the edges. It fits just as snug as it did before despite being sprayed inside too. =) I did cover the hole for the speaker before spraying
How well does it slide in and out of your pocket? Is there any spray that would be more of a soft-touch rubber feel?
icedwhiskey said:
How well does it slide in and out of your pocket? Is there any spray that would be more of a soft-touch rubber feel?
Click to expand...
Click to collapse
It slides in and out just fine. It's just grippy enough to not slide around on my seat as I'm driving. The best thing is if it gets annoying or I want to change it the stuff just simply peels off
i've used plastidip plenty of times on things, and i dont know about the durability of that over time. I use it on emblems on cars to black them out and stuff and small rock chips etc pull it off fairly easily. Plus the finish usually isnt too smooth. i'd rather spend 20 and get the feather case....i can peel that off too
seriouslyjeff said:
I am a fan of keeping my phone caseless but I'm also a fan of keeping the scratches away.
Click to expand...
Click to collapse
How do you plan to keep that arpo over 70 if you don't sell any cases? lol.
link12245 said:
How do you plan to keep that arpo over 70 if you don't sell any cases? lol.
Click to expand...
Click to collapse
Lmao! If we had more than zero cases in the store I would sell em! I take it you work for att too?
poor phone looks like my grandpa's truck bed now.
falconeight said:
poor phone looks like my grandpa's truck bed now.
Click to expand...
Click to collapse
Too bad it can't haul
case companies need to stop making ugly ass cases and make some back cover replacements.
First one to make a soft-touch back cover with kick stands wins my money
Very cool idea! I decided just to wet sand the back cover to keep it looking like carbon fiber AND to make it a little easier to grip on to - pics are in the link on my signature.
I don't know if I agree with spraying the inside too just to get the edges uniform.... spraying the inside (and, well, the outside too I guess) will help trap in heat, something you don't want when charging a phone with a dead battery because this thing gets HOT as it is!
Also, I don't know if I would advertise the ability to simply peel the rubberized coating right off if you want to remove it. I've used this stuff dozens of times, I actually have my race car's tow hook covered in it, and that thing sees a LOT of abuse, but doesn't come right off.... If you can use this stuff to protect against giant metal hooks scratching off the coating with exactly as many dips in the can as you have layers of spray, I doubt this stuff would come off completely without a fight!
seriouslyjeff said:
Lmao! If we had more than zero cases in the store I would sell em! I take it you work for att too?
Click to expand...
Click to collapse
Yes sir. We also have no cases, no accessories, but do have a few of the phones left.
GarciaM25 said:
Very cool idea! I decided just to wet sand the back cover to keep it looking like carbon fiber AND to make it a little easier to grip on to - pics are in the link on my signature.
I don't know if I agree with spraying the inside too just to get the edges uniform.... spraying the inside (and, well, the outside too I guess) will help trap in heat, something you don't want when charging a phone with a dead battery because this thing gets HOT as it is!
Also, I don't know if I would advertise the ability to simply peel the rubberized coating right off if you want to remove it. I've used this stuff dozens of times, I actually have my race car's tow hook covered in it, and that thing sees a LOT of abuse, but doesn't come right off.... If you can use this stuff to protect against giant metal hooks scratching off the coating with exactly as many dips in the can as you have layers of spray, I doubt this stuff would come off completely without a fight!
Click to expand...
Click to collapse
I don't know about it overheating at all although I haven't noticed any problems. As far as it peeling off it peels off without a hitch.. almost too easy, I am going to sand the back of the case in hopes that it will stick a little better. I assume the glossy cover makes it easy to peel but I've peeled it off and sprayed it again already once.
andy2na said:
case companies need to stop making ugly ass cases and make some back cover replacements.
First one to make a soft-touch back cover with kick stands wins my money
Click to expand...
Click to collapse
Dude yes I am totally with you!
andy2na said:
case companies need to stop making ugly ass cases and make some back cover replacements.
First one to make a soft-touch back cover with kick stands wins my money
Click to expand...
Click to collapse
+2 !!!!!!!
How is it holding up, 2 weeks later?
Ah sorry for the late response. It was holing up pretty well. I peeled it off a few days ago due to it peeling.. I think I might lightly sand the back first this time
Sent from my Google Nexus S using XDA App
Good idea and all but why would you not buy a rubberized case instead (replaces battery door). I have seen a dozen shops selling them in the US but none that ship (or none afford-ably yet) to Australia.
mrinternet said:
Good idea and all but why would you not buy a rubberized case instead (replaces battery door). I have seen a dozen shops selling them in the US but none that ship (or none afford-ably yet) to Australia.[/QUOeditTE]
Oh because when I did it 6 weeks ago (right after release of the phone) there were none available
Edit: I misread. I don't like cases. They make the phone too bulky. I now use best skins ever. This peeled off after about a week each time I did it.
Click to expand...
Click to collapse
Hey Guys and Girls,
I just got my Galaxy S III a month ago and I am developing a problem I can't seem to figure out. On the edges of the phone, where the glass meets the blue plastic I am getting a build up of dirt. I keep my hands very clean as I am super OCD about my devices. With that being said, I am getting dirt and "grime" build up in the sides. Sometimes it's hard to notice but it becomes clearer as more days go on. I have contacted Samsung and they were unwilling to decide what it was without seeing it. I contacted my carrier who sent me a replacement after ten or more calls. The new device seems to suffer the same fate. I am wondering if anyone else is having this problem or knows how to get rid of it. I tried to clean it with an air canister with no luck and plenty of sharp objects. None which would do a great job, the only thing that came close was a toothbrush and that was difficult to say the least. Is this a known problem or am I getting more defective devices. Thanks for your input.
P.S- I know the photo isn't great and I will take more to show the effects. It is most noticeable in the corners, the sides, and around the speaker and home button.
Appreciate the help!
I don't have any issues and I have the white one, so it should be more obvious.
Sent from my SAMSUNG-SGH-I747 using xda premium
I had some lint build up in mine before I got a case (free zoogue deal) that covers the gap. I just used the corner of a folded piece of paper to clean it out a few times. Personally, I consider that gap to be a design flaw, particularly considering that the gap is not uniform on all sides...
annulation said:
I had some lint build up in mine before I got a case (free zoogue deal) that covers the gap. I just used the corner of a folded piece of paper to clean it out a few times. Personally, I consider that gap to be a design flaw, particularly considering that the gap is not uniform on all sides...
Click to expand...
Click to collapse
I will try the paper trick, pretty much the only thing I didn't use. I find the gap to be a flaw as well considering that over time it is only bound to get worse. I have found that some spots are wider than others. Not sure why they would create a design like this but glad to see I am not the only one. I thought I was being OCD for awhile.
chaoticfury said:
I will try the paper trick, pretty much the only thing I didn't use. I find the gap to be a flaw as well considering that over time it is only bound to get worse. I have found that some spots are wider than others. Not sure why they would create a design like this but glad to see I am not the only one. I thought I was being OCD for awhile.
Click to expand...
Click to collapse
The gap isn't a design flaw: it's actually the seam between the front and back of the phone, and it's where you slip a spudger (flat plastic knife) in order to pry it apart (after rear screws are removed) for repair.
Just put a case on it -- any case will do -- and then it's virtually a non-issue. If you don't want to use case then just live with having to clean out the gunk build-up every couple months.
(And, frankly, it's kinda lame that you *****ed about this "problem" over 10 phonecalls and then they finally gave you a replacement phone to make you go away and stop costing them money)
Before I had a case I didn't have this issue. The gap isn't very noticeable. I have a Diztronic TPU case now ($10 Amazon) and it has a small lip which covers that gap. Maybe you have dirty pockets or a batch of phones that just had a slightly larger gap.
zmore said:
The gap isn't a design flaw: it's actually the seam between the front and back of the phone, and it's where you slip a spudger (flat plastic knife) in order to pry it apart (after rear screws are removed) for repair.
Just put a case on it -- any case will do -- and then it's virtually a non-issue. If you don't want to use case then just live with having to clean out the gunk build-up every couple months.
(And, frankly, it's kinda lame that you *****ed about this "problem" over 10 phonecalls and then they finally gave you a replacement phone to make you go away and stop costing them money)
Click to expand...
Click to collapse
You are entitled to your opinion about how lame or not lame it was for me to call, but the truth of the matter is I have owned a multitude of phones in my lifetime, none which had a problem like this at all. I am not sure if you are in Canada, but a three year term for a phone that constantly needs maintenance for removing dust does not seem like a premium device in my book. Not to mention the fact that if it finds it's way under the screen as you suggest, then it would only cause future problems, outside of the one year warranty, rendering me with an inoperable phone. So I can't say I agree with your analysis of my calls. Not to mention it costs them a negligible amount to speak with me on the phone.
Most of the cases I have found only cover the rear of the device and do not cover the lip. I would hate to cover up my super phone in a five dollar POS case just for the sake of keeping dust out of a device that should have been designed to not have that happen to begin with.
chaoticfury said:
You are entitled to your opinion about how lame or not lame it was for me to call, but the truth of the matter is I have owned a multitude of phones in my lifetime, none which had a problem like this at all. I am not sure if you are in Canada, but a three year term for a phone that constantly needs maintenance for removing dust does not seem like a premium device in my book. Not to mention the fact that if it finds it's way under the screen as you suggest, then it would only cause future problems, outside of the one year warranty, rendering me with an inoperable phone. So I can't say I agree with your analysis of my calls. Not to mention it costs them a negligible amount to speak with me on the phone.
Click to expand...
Click to collapse
It can't get behind the screen because it's one piece, so don't worry about that.
Most of the cases I have found only cover the rear of the device and do not cover the lip. I would hate to cover up my super phone in a five dollar POS case just for the sake of keeping dust out of a device that should have been designed to not have that happen to begin with.
Click to expand...
Click to collapse
Yeah, many of the hard polycarb cases -- like Samsung's mesh case, or the popular Rock Quicksand -- that offer little edge protection don't cover the the entire lip because they can't. All TPU and hybrid cases do, though.
chaoticfury said:
Most of the cases I have found only cover the rear of the device and do not cover the lip. I would hate to cover up my super phone in a five dollar POS case just for the sake of keeping dust out of a device that should have been designed to not have that happen to begin with.
Click to expand...
Click to collapse
Most TPU cases have a lip which wraps around the front. It's not a hard plastic case that tries to snap into place. I have the Diztronic case and the lip is definitely there and it definitely covers the gap you're referring to. I had a TPU case for my GSII and it's the same basic design. If you don't want a case then you'll have to put up with the dirt in the crevices or get a different phone.
AngelsNecropolis said:
Most TPU cases have a lip which wraps around the front. It's not a hard plastic case that tries to snap into place. I have the Diztronic case and the lip is definitely there and it definitely covers the gap you're referring to. I had a TPU case for my GSII and it's the same basic design. If you don't want a case then you'll have to put up with the dirt in the crevices or get a different phone.
Click to expand...
Click to collapse
Thanks Angels,
I will have a look at the cases as you suggest and try to find one that I like. I would hate to give up this phone as I very much enjoy it and don't see any other phones that interest me at the present moment.
chaoticfury said:
Thanks Angels,
I will have a look at the cases as you suggest and try to find one that I like. I would hate to give up this phone as I very much enjoy it and don't see any other phones that interest me at the present moment.
Click to expand...
Click to collapse
Np. I use this case. http://www.amazon.com/Diztronic-Fle...54&sr=8-7&keywords=diztronic+galaxy+s+III+tpu The matte feel is nice and it comes with a screen protector which I applied and it's good quality as well. It doesn't attract as much finger prints as other screen protectors I've used and it's very clear.
Off Topic:
But... even with a TPU case you'll have to be careful of drops. Gorilla Glass isn't as strong as it's touted to be against sudden impacts (watch iPhone5 vs Samsung Galaxy S III drop test). My GSII got a small scratch prior to applying a protector and just today a coworker dropped her GSII on concrete and the TPU case didn't stop the screen from severely cracking. It will protect from a lot of surface scratches though. My mom just got her first smart phone (a Pantech) and dropped it and it slid across the floor. I hadn't gotten her screen protector yet and her screen has some small scratches and nicks.
I guess my point is even if it reduces the aesthetics get a case, a screen protector, and be careful still.
I ordered that case like you suggested but it has yet to arrive. The replacement phone I got from my carrier is having even worse problems than my first one. I was even more careful with this than the others. Not really sure what to do. I am intrigued by the fact that I see nobody who has a white GS3 post problems about it. I wonder if the blue is the only one with these kind of issues.
I've got a blue one and don't have that problem
Galaxy SIII via XDA premium
This thread on tight fitting cases might be helpful.
I have. White phone no such issues I also noticed the white button sticks out a bit more.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
I had a blue one and had the same problem. The dust was noticeable around the edge and around the speaker. I ended up exchanging it because the home button died. All they had in stock was white so I took it. I have to say, the white one has much less of a seam and there is no noticeable dust build up!
Sent from my SGH-I747M using Tapatalk 2
cboone said:
I had a blue one and had the same problem. The dust was noticeable around the edge and around the speaker. I ended up exchanging it because the home button died. All they had in stock was white so I took it. I have to say, the white one has much less of a seam and there is no noticeable dust build up!
Sent from my SGH-I747M using Tapatalk 2
Click to expand...
Click to collapse
Going to see if I can get a white. I prefer blue but I hate this problem.
Mine collects dust too and I use a Rock case. I'd clean it if I could, but I can't seem to fit paper or anything in to push it out either. It's hardly visible, not putting too much thought in to it.
Hi all - what's the best way to clean the leather stitching at the back without damaging the leather skin and the stitching? I had placed this on top of a wet table earlier and now it's not looking to good. :cyclops:
mundixx said:
Hi all - what's the best way to clean the leather stitching at the back without damaging the leather skin and the stitching? I had placed this on top of a wet table earlier and now it's not looking to good. :cyclops:
Click to expand...
Click to collapse
What is it you're trying to clean off? I use alcohol swabs a couple times a day on my phone front and back and have for every phone in the past several years. I am a germaphobe though. It works really well. Never damaged anything before. I am sure it's not great for the leather, but I'll worry about that if I see any damage then.
I would not use alcohol, especially rubbing alcohol. (there are numerous different types of alcohol). Rubbing alcohol will dry out and crack the leather it may not happen right away but it will happen if used frequently. By the time you start to see any damage it will be too late. If you have a serious stain and are dead set in using alcohol buy some isopropyl alcohol and do a 50/50 mix of that and water.
I would use leather cleaner and moisturizer. My wife has been using Coach products on her leather Coach purses for years and her purses that are 20 years old still look like new:
http://www.coach.com/shop/women-accessories-product-care
I would also stay away from leather car seat cleaner as car seats are a bit more rugged than the leather used on the phones. (the only car seat product I would consider using is Leatherique, but it is insanely expensive).
Just my $.02 worth
Hi all,
Have had my 10 since release day have had it in a case and screen protector since day one, both expensive ones too, tempered and a tech 21, now the tech 21 allowed a little bit of grit to get underneath the case and through pressure from my pocket or handling, the grit has etched a small scratch from the gun metal paint on the back at the top of the phone. I've now got a phantomskinz skin on it so it's covered but I wondered if anyone has ever matched the paint colour and type and attempted to either spray or touch up a mark?
There is no dents, literally just a chip from the paint, really annoyed me, tech 21 have been superb for me in the past.
I also have a friend who has dropped his literally the day he thought he didn't need a case and has a few scratches on the back, it was actually him who suggested painting it, at first I thought no way but thought I'd ask on here just in case anyone has ever committed to trying to paint their phone, htc 10 or not and how did you get along?
I'm sure we're not alone in having the odd scratch or two on our shiney htc 10s.
Any thoughts? Places who may do the job or what the colour or paint type is specifically? Is it treated? With what?,
Cheers [emoji106]
dladz said:
Hi all,
Have had my 10 since release day have had it in a case and screen protector since day one, both expensive ones too, tempered and a tech 21, now the tech 21 allowed a little bit of grit to get underneath the case and through pressure from my pocket or handling, the grit has etched a small scratch from the gun metal paint on the back at the top of the phone. I've now got a phantomskinz skin on it so it's covered but I wondered if anyone has ever matched the paint colour and type and attempted to either spray or touch up a mark?
There is no dents, literally just a chip from the paint, really annoyed me, tech 21 have been superb for me in the past.
I also have a friend who has dropped his literally the day he thought he didn't need a case and has a few scratches on the back, it was actually him who suggested painting it, at first I thought no way but thought I'd ask on here just in case anyone has ever committed to trying to paint their phone, htc 10 or not and how did you get along?
I'm sure we're not alone in having the odd scratch or two on our shiney htc 10s.
Any thoughts? Places who may do the job or what the colour or paint type is specifically? Is it treated? With what?,
Cheers [emoji106]
Click to expand...
Click to collapse
nice idea and would love to see how it turns out...
SacredDeviL666 said:
nice idea and would love to see how it turns out...
Click to expand...
Click to collapse
Aye, they'd look a lot better if we could just touch them up when they took a knock.
You could theoretically paint these all-metal phones pretty easily. You would, however, need to completely disassemble the phone to get just the back shell (in this case specifically) so that you could begin prep work on it for paint/powder coating.
You would first use a high grit sanding on it to rough the surface up for adhesion. Then you either:
a)apply paint
b)begin process of powder coat
Too much effort, in all honesty, for this device though. I've watched a fair number of tear down videos, and the 10 looks to be as bad, if not worse, than the M8/M9 to take apart. I have to replace my screen on my M8, to keep it for my new burner device, so I may take it entirely apart and paint it electric blue by hand. Either that, or do a high polish on it, and get it shiny.
thefoodman52 said:
You could theoretically paint these all-metal phones pretty easily. You would, however, need to completely disassemble the phone to get just the back shell (in this case specifically) so that you could begin prep work on it for paint/powder coating.
You would first use a high grit sanding on it to rough the surface up for adhesion. Then you either:
a)apply paint
b)begin process of powder coat
Too much effort, in all honesty, for this device though. I've watched a fair number of tear down videos, and the 10 looks to be as bad, if not worse, than the M8/M9 to take apart. I have to replace my screen on my M8, to keep it for my new burner device, so I may take it entirely apart and paint it electric blue by hand. Either that, or do a high polish on it, and get it shiny.
Click to expand...
Click to collapse
I wouldn't take the device apart to be honest. I think if the paint was matched a small brush could cover the scratches.
Anyone else got any ideas or suggestions besides tearing down and breaking out some spray paint.
[emoji21]
dladz said:
Anyone else got any ideas or suggestions besides tearing down and breaking out some spray paint.
[emoji21]
Click to expand...
Click to collapse
Plasti Dip it and tell us how that worked out
Sprint HTC 10 running BadBoyz
pelon90005 said:
Plasti Dip it and tell us how that worked out
Sprint HTC 10 running BadBoyz
Click to expand...
Click to collapse
No.
i have a few tiny specs of paint gone due to the same reason. barely noticeable but still now i know about them . . . .
exocetdj said:
i have a few tiny specs of paint gone due to the same reason. barely noticeable but still now i know about them . . . .
Click to expand...
Click to collapse
That's what I mean, it's the tiny blemishes that are the easiest to cover up but still annoying, if you get a scratch on your car you can get it resprayed or touched up same with paint on walls at home or pretty much anything I'm surprised that a service like this doesn't already exist.
What about a skin?
yldlj said:
What about a skin?
Click to expand...
Click to collapse
The OP mentioned using one already. Skins are basically stickers that'll fade and peel over time and the corners will start to lift in cases where you don't apply perfectly, like a screen protector.
To the OP, may sound silly but some car paint shops have machines that match a materials color down to the H/S/V and can supply touchup paint. Have you looked into that?
Sent from my HTC6545LVW using Tapatalk
richii0207 said:
The OP mentioned using one already. Skins are basically stickers that'll fade and peel over time and the corners will start to lift in cases where you don't apply perfectly, like a screen protector.
To the OP, may sound silly but some car paint shops have machines that match a materials color down to the H/S/V and can supply touchup paint. Have you looked into that?
Sent from my HTC6545LVW using Tapatalk
Click to expand...
Click to collapse
I haven't mate, but I have to say I agree, ultimately something on a smaller scale would be ideal.
Have been quite busy these last few days but will be actively looking into it next week and may even price up some paint if I can match up the colour and type, I have a friend who does custom jobs (cars) so he may know more. Will let you guys know if I find anything worth mentioning.
Cheers for the idea.
yldlj said:
What about a skin?
Click to expand...
Click to collapse
I have a phantom skinz skin, which is solid and really stuck on there, looks great but defeats the object when you know there are blemishes or scratches underneath, if you were to resell the phone, a few scratches could really impact the price.