[i9300] Cannot boot to PA from CM11 - Paranoid Android Q&A

Hi, I did factory reset, wipe cache and dalvik, then instal PA and gapps but my phone always boot into recovery. Can somebody help me.
My phone: Samsung Galaxy S3 i9300
Current OS: Cyanogenmod 11 (11-20150607-NIGHTLY-I9300)
Recovery: TWRP v2.8.6.1
PA version: pa_i9300-5.1-20150612.zip
gapps: I tried all android 5.1 gapps from this two links here and here.

Flash boeffla kernel 4.0 alpha 3, the ROM will boot up normally, it's just a workaround tho, dunno why the ROM won't boot up without flashing a kernel.

AbdelGad said:
Flash boeffla kernel 4.0 alpha 3, the ROM will boot up normally, it's just a workaround tho, dunno why the ROM won't boot up without flashing a kernel.
Click to expand...
Click to collapse
Same issue still happened

I wish everyone would realize that posting in this forum is useless. If you have a device specific problem, you need to take it up with your maintainer.

Pirateghost said:
I wish everyone would realize that posting in this forum is useless. If you have a device specific problem, you need to take it up with your maintainer.
Click to expand...
Click to collapse
Sorry. Newbie here. I thought posting here will help me, as per forum description (If you need help troubleshooting a problem, please be as specific as possible by describing your software configuration, including the ROM, kernel, and any modifications you've done.)

Yeah but the maintainer and users of that device do not use this forum like they do their own device forum.
Device specific issues should always go to the device maintainer's thread, since the team doesn't support anything other than nexus in the main line of development.

Pirateghost said:
Yeah but the maintainer and users of that device do not use this forum like they do their own device forum.
Device specific issues should always go to the device maintainer's thread, since the team doesn't support anything other than nexus in the main line of development.
Click to expand...
Click to collapse
Ok got it. I will find the forum and ask there. Thank you.

Related

[ROM]Find 7] "Metallium OS" by Spike Lab

Spike Laboratory - Metallium​
ABOUT Spike Laboratory - Metallium
Spike Laboratory - Metallium >>SPLM is an after market firmware based latest "Android Lolli-Pop 5.X.X. This firmware is designed By Spike Laboratory .This firmware suits specially for those people who like,Multitasking performance,optimum speed. In-addition to This the firmware has Inbuilt options and settings to make customization of your Device the way you like.
Features , changelogs and screenshots can be found on Spike Laboratory - WEB
SUPPORT FOR SPLM RELATED ISSUES :
We spend an astonishing amount of time developing this firmware. We can't spend much time on XDA as a result, so if you need support, please try the following:
Search. Search, search, search. Yes, you. I don't care how unique or important your question is, it's very likely someone has addressed it already. Especially if you're even close to new at this.
Ask a question in your device forum either in xda . Someone will no doubt try to help you. Warning: this help may come in the form of telling you it's a dumb question that has been asked before. See step 1 - such are the perils of asking questions when you haven't done the research yourself. Android is about helping yourself.
DOWNLOAD LINKS:
SPLM ROM AND RECOMMENDED GAPPS
SPLM ROM for Oppo Find 7
(Please do not mirror Download links or Mention Link in any of your posts )
INSTALLATION STEPS:
Minimum Requirements To Install SPLM:
Your Device Should be Rooted with Unlocked Boot-loader & Latest Custom recovery Installed.
Installation Procedure:
(A)If you are making a Fresh Installation(or Coming from any other rom other than SPLM) :
Boot Into Recovery Mode
Wipe Data,System,Cache,Dalvik
Flash provide latest SPLM ROM Zip
Again Wipe Cache and Dalvik
Reboot To System
Now again Reboot into Recovery Mode
Flash latest G-Apps
Wipe Cache and Dalvik....and Reboot To System.
(B)If you are already Running SPLM Rom But You want to Update with latest Version:
Boot Into Recovery Mode
Flash provided Updates of SPLM ROM(latest weekly)
Again Wipe Cache and Dalvik
Reboot To System.
SOURCE:
SPLM ROM complete source
Kernel sources
OFFICIAL LINKS & INFORMATIONS :
Official Web-Page
WHO IS TEAM SPIKE LABORATORY?:
TEAM SPIKE LABORATORY
Every donation you send to us goes right back into the rom. It's used for hardware, server costs, etc - all the things that help us make SPLM better with every release. Your support means the world to us! If you've enjoyed SPLM Rom, please consider contributing or donating so we can achieve our goal.Please Don't hesitate to hit the THANKS button.Thank you, and we hope you continue to enjoy SPLM Roms!
http://forum.xda-developers.com/donatetome.php?u=4758315
​
XDA:DevDB Information
Metallium OS, ROM for the Oppo Find 7
Contributors
Schneiderle, a1krab
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Version Information
Status: Beta
Current Beta Version: 1.0
Beta Release Date: 2015-09-09
Created 2015-09-09
Last Updated 2015-09-10
Reserved
Reserved
nice! a new rom for the find 7. I have a few questions. is it universal for 7/7a? does it support unified storage? how about the new lcd panels? thanks a bunch
Supports lvm I have a find 7 not find 7a the ROM is tested on find 7 you should see if camera is working or not on find 7a. I am in contact with mikeng of cm to keep myself updated with everything regarding both the devices
Sent from my X9076 using Tapatalk
Looks great!
---------- Post added at 07:50 PM ---------- Previous post was at 07:49 PM ----------
I will test it and report any bugs. Thanks for this ROM. Also, in the future, can you merge the new kernel (DespairKernel R1) which currently is in testing mode. Thanks.
No we want to keep it simple don't want to boost this as a putover . But you can flash kernels using a custom recovery and your kernel aduitor to tweak it just for the sake of it I will see what is best to take from despair kernel in future releases.
Sent from my X9076 using Tapatalk
This looks awesome! Glad to have a new rom for the find 7 series. I'll be checking this out over the weekend for sure!
EDIT: I've been using this ROM for the whole weekend, and can safely say that while this device doesn't come with all the features of other ROMs, they certainly have a speedy and solidly built ROM! I will now be using this as my daily driver, as your ROM seems to give me the best battery life of any ROM available (I should mention I'm also using the Despair Kernel too).
Awesome job guys! Can't wait for the next update!
Hello I am the team leader, i would like to say this a initial build .
This rom will be completely diffrent and we hope independent as some others are.
If you have any suggestions about further improvments features either pm me or make pull requests.
Enjoy and thanks for positive support.
Tried the rom and im amazed. Stock keyboard is awesome. Love it. Everything is smooth and composed. Already request some features. Hope to see this rom grow stronger. Good job dev. Some screenshot attached. If anyone miss Color OS camera, here is the link.
http://forum.xda-developers.com/oneplus-one/themes-apps/port-coloros-camera-cm11s-t3030369
Works fine here.
Edit: OP please update installation process for Find7 users. Some of us still new and this device is complicated when installing custom rom. Also need to flash SuperSU zip to obtain root.
StormTrooper89 said:
Tried the rom and im amazed. Stock keyboard is awesome. Love it. Everything is smooth and composed. Already request some features. Hope to see this rom grow stronger. Good job dev. Some screenshot attached. If anyone miss Color OS camera, here is the link.
http://forum.xda-developers.com/oneplus-one/themes-apps/port-coloros-camera-cm11s-t3030369
Works fine here.
Edit: OP please update installation process for Find7 users. Some of us still new and this device is complicated when installing custom rom. Also need to flash SuperSU zip to obtain root.
Click to expand...
Click to collapse
Thx a lot for this new rom
So is lvm supported?
Ups, wrong quote, sorry
Support new LCD screen R63419 ?
Hi team,
Wonder if the ROM support the new LCD screen R63419 ?
spoonymoon said:
Thx a lot for this new rom
So is lvm supported?
Ups, wrong quote, sorry
Click to expand...
Click to collapse
Yes it is supported. Using Color Os lvm. No issue so far.
Need more screen shots..till now MIUI has been the best Rom out there for find 7(my personal choice) after experimenting all the roms
sd card not mounted?
Can you help me out here? for me my internal storage not showing up.
do i need to mount it in the custom recovery?
---------- Post added at 19:15 ---------- Previous post was at 18:35 ----------
lol. so i solved it by wiping the internal sd in the TWRP.
MR_EVIL said:
Need more screen shots..till now MIUI has been the best Rom out there for find 7(my personal choice) after experimenting all the roms
Click to expand...
Click to collapse
If you prefer miui i think this rom is not for you. It is near stock aosp with extra features but not crowded. It still in early release so there is not much cuatomization.
Question, what is Metaon? In simpler word. Does it already merge in splm rom?
StormTrooper89 said:
Question, what is Metaon? In simpler word. Does it already merge in splm rom?
Click to expand...
Click to collapse
I wonder about this rom support R63419 LCD panel
StormTrooper89 said:
Question, what is Metaon? In simpler word. Does it already merge in splm rom?
Click to expand...
Click to collapse
Mateon engine is for audio and ram management we will surely in future release make our own audio engine which will be open source and robust which shouldn't be using any Sony or any other libs
With mateon engine its like that audiofx won't work.
ROM will have a huge change from aosp aspects from Monday but will have everything opensource.
Well I look after find 7 and I am the technical lead who develop apps and features for the rom and in that spirit if you want more and more features from everywhere then I am sorry this Rom isn't for you we don't follow all in one concept . Our progress will be slower but we promise a better experience. Not better than any other ROM as everybody has their own liking and taste. We will do what we like but will also listen to the users and bug reports and reporting issue are supported on threads and social network or any other means possible . Don't post xposed frameworks related queries , statements and issues here. Use a stock firmware if you use xpose or if you use it then don't blame the ROM blame the module for not working properly or creating issues with the ROM .
We will surely try to solve issues if any but just not xpose and last thing
We encourage feature request but this Rom has that and this ROM has this . we don't encourage such statements. We will just add what is more feasible and usable as we don't want the features that aren't used anytime or just a put up or are gimmicky .
Well we will in Marshmellow release will start nightlies if possible. But for now we need to settle down and build up a team and a strong spirit to start with.
Sent from my X9076 using Tapatalk
keep up the good work..hope to see spike lab making it big in near future and probably on some device...I'm building a protopye ..will pm if ur Rom is needed but I'm looking for a Rom similar to MIUI + Aosp features..
Regards

[Rom][6.0.0/5.1.1(Not Sure)][DM][OMNIROM Build Modified][BigPart][Alpha]

Hi And Welcome To a Non-Tested Version of Android 6.0.0 on the xoom (Maybe 5.1.1 Not Sure) But back to the topic
This is mostly 5.1.1 but maybe with new of fixed features (I've never tested it as I said)
Here is how to install (I found this on another area)
1. ROOT YOUR DEVICE
2. Install BigPart TWRP
3. Wipe your system and flash the zip file
Here is the zip file
(I'm having Issues of Attaching The File So Please Wait)
XDA:DevDB Information
Android 6.0.0 or Android 5.1.1, ROM for the Motorola Xoom
Contributors
MichaelTech, Schischu, dreamcwli, michie
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 2.6.x
ROM Firmware Required: Rooted BigPart
Based On: OmniRom
Version Information
Status: Alpha
Created 2015-11-19
Last Updated 2015-11-19
so is this rom 5.1.1 or 6.0? id love to try it out...
I just resurrected my old xoom and converted it to bigpart.
waiting for the zip....
Waiting for test it.
Did you build this rom? If so, how can you not know what version of Android it is?
MichaelTech said:
(I've never tested it as I said)
Here is how to install (I found this on another area)
Click to expand...
Click to collapse
Can you provide more information please?
Just "copy n paste" from "other area" is not very trustworthy... i'm sorry to say.
I would love to have 6.0 on Xoom, but I want it to be wit ha Git Repo or anything and not only an ominous zip file from somewhere...
so please, more information is the key!
sdthelord said:
Can you provide more information please?
Just "copy n paste" from "other area" is not very trustworthy... i'm sorry to say.
I would love to have 6.0 on Xoom, but I want it to be wit ha Git Repo or anything and not only an ominous zip file from somewhere...
so please, more information is the key!
Click to expand...
Click to collapse
Based on this post, I think that, best-case scenario, he just kanged Schischu's 5.1.1 build and maybe themed it to look like 6.0. But I'm betting we never see a zip file.
As with everyone else I am curious to this. [6.0.0/5.1.1(Not Sure)] <--- this seems a little strange. It can only be one Android version. If it's 5.1.1 with some cherry picks and tweaks, that's great but just say.
Also some source would be good so we can establish what it actually is. Upload to androidfilehost or something similar if you can't attach.
P.S OmniRom wanted me to make a rom so perfectly fine
MichaelTech said:
P.S OmniRom wanted me to make a rom so perfectly fine
Click to expand...
Click to collapse
Look we shouldn't be fighting about whos rom it is It's just code that matters
MichaelTech said:
Look we shouldn't be fighting about whos rom it is It's just code that matters
Click to expand...
Click to collapse
Here is the error I keep getting
 vBulletin Message
Invalid post specified. This can happen for a variety of reasons-- most likely because the thread or post you are trying to view has been moved or deleted. Please return to the forum home and browse for another similiar post.
but nothing happened to this page so what is this problem
MichaelTech said:
Look we shouldn't be fighting about whos rom it is It's just code that matters
Click to expand...
Click to collapse
Speaking of ROM's, when can we expect yours? If the item you posted in #11 is still the zip attachment problem, have you thought about trying the suggestion from Matt4321?
brewer75 said:
Speaking of ROM's, when can we expect yours? If the item you posted in #11 is still the zip attachment problem, have you thought about trying the suggestion from Matt4321?
Click to expand...
Click to collapse
I can when you solve my problem I keep having
MichaelTech said:
I can when you solve my problem I keep having
Click to expand...
Click to collapse
The Download is now available in the downloads tab
here is info
Modified Launcher3
Modified SoundRecorder
Modified PackageInstaller
Android 5.1.1 with tweaks
gapps and super su are not included so please download them
If the OP did not do some coding on our outdated kernel and just synced omnirom sources, or even worse, just replaced some apk's in the flashable zip, all bugs are still there. If you did alter the kernel code you have to apply to GPL and post kernel sources.
I don't mean any disrespect but I kinda have the feeling that you don't have alot of experience with coding. (Please correct me if I'm wrong though) Posting untested software can give inexperienced users alot of problems and could be potential dangerous with our altered partion layout.
This wont have any benefit over Schisu's rom for now so I really have to advise you to wait for updated kernel sources before posting.
michie said:
If the OP did not do some coding on our outdated kernel and just synced omnirom sources, or even worse, just replaced some apk's in the flashable zip, all bugs are still there. If you did alter the kernel code you have to apply to GPL and post kernel sources.
I don't mean any disrespect but I kinda have the feeling that you don't have alot of experience with coding. (Please correct me if I'm wrong though) Posting untested software can give inexperienced users alot of problems and could be potential dangerous with our altered partion layout.
This wont have any benefit over Schisu's rom for now so I really have to advise you to wait for updated kernel sources before posting.
Click to expand...
Click to collapse
First yes that was very mean
second many other roms use these old kernels like OmniRom 5.1.1 for the xoom
third im a level 8 of 10 coder
Download not possible. File not found.
MichaelTech said:
First yes that was very mean
second many other roms use these old kernels like OmniRom 5.1.1 for the xoom
third im a level 8 of 10 coder
Click to expand...
Click to collapse
Like I said, I don't mean any disrespect my friend. The Xoom needs talented developers but not knowing if your rom is android 6 or 5 raises questions
You should contact the old member of team EOS or Schischu.
Good luck.
michie said:
Like I said, I don't mean any disrespect my friend. The Xoom needs talented developers but not knowing if your rom is android 6 or 5 raises questions
You should contact the old member of team EOS or Schischu.
Good luck.
Click to expand...
Click to collapse
I mostly belive its android 5.1.1
MichaelTech said:
im a level 8 of 10 coder
Click to expand...
Click to collapse
How many more XP do you need before you level up to 9?
What a joke...

[ROM][6.0.1][Official]Vanir/Commotio for D2SPR Samsung Galaxy S3 Sprint

VanirAOSP and Commotio Android MM 6.0.1 for the SPH-L710​
Credits go to Team Vanir and DHO for the development of these roms.
Disclaimer : Use these ROM's at your own risk and please don't blame me if you brick your device . If you are new and don't know what your doing please don't flash these ROMS until you've done your research , read through the thread, and made yourself aware of previous known issues. THIS THREAD IS FOR DEVELOPMENT AND BUG REPORTING ONLY EVERYTHING ELSE WILL BE IGNORED. Use the Q&A thread for questions and other issues.
Note for mods: I am taking over for MonstaDriva, if this thread presents an issue or there is a better way to do this let me know.
This thread will be updated as I remember to add things.
I do not have this device, therefore I can not test any builds. I am also not known in the Vanir/Commotio community yet. This is my first time maintaining a device, I will probably screw up, a lot, until I get practiced at it. Because I do not have this device, I am extremely reliant on bug reports by the community, therefore if you are not reporting a bug all other questions or issues go in the Q&A thread. I REPEAT THIS THREAD IS FOR DEVELOPMENT AND BUG REPORTING ONLY EVERYTHING ELSE WILL BE IGNORED. This is to keep this thread clean so I can keep track of what needs to be fixed.
The following is required if reporting a bug, everything else will not receive a response and the bug may or may not be ignored.
Reporting a bug:
Read through the whole thread. See if bug is already reported
Read through again.
If bug is already reported, provide link to original report, add your logs, and any extra information that expands upon what is missing.
List rom. EG. Vanir or Commotio
List build date
List official or unofficial
Describe issue in detail. All know facts
Steps to reproduce issue
Logs. Any and every log imaginable. Eg. Logcat, kmesg, dmesg, etc.
Read through the whole thread again
Anything else that will help diagnose the issue
If you can satisfy all the above requirements then you may report a bug.
Downloads:
Unofficial: Coming soon
Official Vanir: http://www.emccann.net/nuclearmistake/VanirAOSPNightlies/d2spr/
Official Commotio: http://www.emccann.net/dho/3-Vanir-mirror/4-nighties/
GAPPS:
DHO: http://www.emccann.net/dho/5-Gapps/
OpenGapps: http://opengapps.org/
Installation:
Backup
Wipe -- Note: If coming from stock you must wipe the internal storage.
Flash
Gapps -- Note: do not reboot before flashing gapps. This is an issue with how gapps are flashed on android 6. Source
Sources:
Rom: https://github.com/VanirAOSP
Device: https://github.com/VanirAOSP/device_samsung_d2spr
Kernel: https://github.com/CyanogenMod/android_kernel_samsung_d2
Gerrit: http://gerrit.vanir.co:7070
Community: https://plus.google.com/communities/111378032131473754160
XDA:DevDB Information
[ROM][6.0.1][Official]Vanir/Commotio for D2SPR Samsung Galaxy S3 Sprint, ROM for the Sprint Samsung Galaxy S III
Contributors
Lrs121
Source Code: https://github.com/VanirAOSP
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod, AOSP, CAF Mixed
Version Information
Status: Nightly
Created 2016-05-11
Last Updated 2016-08-28
Reserved
Lsr121 is the new official rom/thread maintainer .
Thank you Lsr121 for doing this . Thread looks great and I appreciate you taking over the official Vanir/Commotio !! Users will appreciate ya too man .:good: I will be asking the mods to close my old thread soon .
MonstaDriva said:
Thank you Lsr121 for doing this . Thread looks great and I appreciate you taking over the official Vanir/Commotio !! Users will appreciate ya too man .:good: I will be asking the mods to close my old thread soon .
Click to expand...
Click to collapse
Good luck with everything!
Looks good. Lrs121, for not having this device, you have definitely done a lot for it. Thanks bro.
I was honestly expecting this thread to explode with comments. Well I've gotten a new wireless card and can begin attempting to push patches if anyone thinks they may be necessary.
Lrs121 said:
I was honestly expecting this thread to explode with comments. Well I've gotten a new wireless card and can begin attempting to push patches if anyone thinks they may be necessary.
Click to expand...
Click to collapse
Vanir run's so good usually that there's seldom any issue even when other devices are having them . You are sort of like the infamous Maytag Repairman Bored for wanting to patch . Sent you a pm .
Anyone install this yet?? Screenshots would be cool...
I JUST reverted back to Wicked X 4.4 because the new 6.0 Roms i've tried (OctOS, AICP) have the exact same issues with phone calls, audio, and especially BT. They're usable, but barely. Takes too long for calls to answer, and it's buggy....after answering, they'll still appear to be receiving a call haha. They're heavily based on CM13. Dunno how much AOSP. If someone had a screenshot of their InCallUI with this ROM that'd be awesome.... if it's different I'd go ahead and wipe 4.4 again to try it.
EDIT
If there's a Q&A thread, I couldn't find it....Im sorry to be so noob but, should I just make a new thread? Again, such noob but, would it make sense to make a thread in QA titled the same as this thread, and link to THAT thread in this thread's OP?
akira6968 said:
Anyone install this yet?? Screenshots would be cool...
I JUST reverted back to Wicked X 4.4 because the new 6.0 Roms i've tried (OctOS, AICP) have the exact same issues with phone calls, audio, and especially BT. They're usable, but barely. Takes too long for calls to answer, and it's buggy....after answering, they'll still appear to be receiving a call haha. They're heavily based on CM13. Dunno how much AOSP. If someone had a screenshot of their InCallUI with this ROM that'd be awesome.... if it's different I'd go ahead and wipe 4.4 again to try it.
EDIT
If there's a Q&A thread, I couldn't find it....Im sorry to be so noob but, should I just make a new thread? Again, such noob but, would it make sense to make a thread in QA titled the same as this thread, and link to THAT thread in this thread's OP?
Click to expand...
Click to collapse
The qa thread is meant to be made but it seems it hasn't auto generated. I plan to make one as soon as I get back to my desktop.

[Testing]Cyanogenmod 13 - Unofficial

Hey guys,
I've just managed to make a build of Cyanogenmod with lots of help by a guy called sultanqasim (actually he did most of the work), thanks a lot bro
Probably it's very bugy. Let's call it Pre-Alpha. Anyway, the build is ready and I need guys who'd like to try it out.
I chase GDrive for the first CM build. All Beanstalk builds are uploaded to the official Beanstalk AFH.
Currently working:
Display
WiFi
Bluetooth
Sensors
Audio through bluetooth
NFC
Broken:
Audio through built in speakers or headphones
RIL
Camera
Mic
Various other smaller things
Some Sprint users also report that it doesn't work for them. Just try it out if you like. Every tester's report takes the project a bit closer to stable builds.
Download Cyanogenmod (GDrive)
Download Beanstalk (AndroidFilehost)
To flash it:
in TWRP, reformat the userdata partition as unencrypted ext4. Go to Wipe->Advanced Wipe, select data, click on repair or change filesystem, change file system, and choose ext4.
in TWRP, go to Wipe -> Advanced wipe, and erase system, data, dalvik, and cache
flash the file by pushing it to your sdcard or you can use adb sideload. Also you can flash GApps optionally.
reboot into the system
Looking forward to your reviews. Thanks a lot
Good luck to all of you
Remember: I'm not responsible for anything that could happen as a result of following my instructions or anything else.
XDA:DevDB Information
[Testing][ROM] Cyanogenmod 13 - Unofficial, ROM for the HTC 10
Contributors
krassermensch, sultanqasim
Source Code: https://github.com/sultanqasim
ROM OS Version: 6.0.x Marshmallow
Based On: Cyanogenmod
Version Information
Status: Testing
Created 2016-06-10
Last Updated 2016-07-13
If you like my work consider a donation to support me in financing computer-components which are meant to replace the defect ones in my broken PC.
If you donate you'll donate to my father who will gimme the money. Thank you really much!
Nice!
Moderator Information,
Thread re-opened to allow OP to upload file on XDA host.
Can't wait for CM13 on this phone. I know Squid2 has been a ton of work into this, from what I know, already a solid month behind the scenes.
device boots up? display?
thought this thread was closed till a download link was posted...
i don't seem to find any link or me gone blind lolll
edit:- just read that its opened for uploading the link so it seems upload is in progress
Maybe change the title with correct spelling of " Unofficial "
We've had a booting and partially working version of CM13 for a while now, it's posted by @squid2 somewhere in the guides and discussion thread. Which, makes me wonder, with all due respect, how this is any different from that build?Have there been any fixes to the broken things on that ROM (most of the radio, for example) that warrant this being a separate version of CM13?
psych0r3bel said:
We've had a booting and partially working version of CM13 for a while now, it's posted by @squid2 somewhere in the guides and discussion thread. Which, makes me wonder, with all due respect, how this is any different from that build?Have there been any fixes to the broken things on that ROM (most of the radio, for example) that warrant this being a separate version of CM13?
Click to expand...
Click to collapse
i guess we would need to wait for the upload to be finished to see if its any different or the same as the Op doesn't seem to be much of responding to any comments
@krassermensch - Can you give us a list of what is and isn't working in your experience, at least?
psych0r3bel said:
We've had a booting and partially working version of CM13 for a while now, it's posted by @squid2 somewhere in the guides and discussion thread. Which, makes me wonder, with all due respect, how this is any different from that build?Have there been any fixes to the broken things on that ROM (most of the radio, for example) that warrant this being a separate version of CM13?
Click to expand...
Click to collapse
Hey, squid2 is the guy I named sultanqasim in the first post of this thread as sultanqasim is his GitHub name. I managed to build Cyanogenmod with his help and his sources. He's the main developer. I'm just trying to make a more current build for those who'd like to have one. As a result my builds are based on his latest commits. I'm just the one who did minor patches which aren't as relevant as the ones squid2 performed. He's the more experienced one of us. You should treat me like a maintainer and him like the main ROM developer.
krassermensch said:
Hey, squid2 is the guy I named sultanqasim in the first post of this thread as sultanqasim is his GitHub name. I managed to build Cyanogenmod with his help and his sources. He's the main developer. I'm just trying to make a more current build for those who'd like to have one. As a result my builds are based on his latest commits. I'm just the one who did minor patches which aren't as relevant as the ones squid2 performed. He's the more experienced one of us. You should treat me like a maintainer and him like the main ROM developer.
Click to expand...
Click to collapse
Hah, thanks for clearing that up - good to know. Didn't mean to attack you, just asking the questions trying to keep it all honest. So should we assume his working/not working list applies here?
psych0r3bel said:
Hah, thanks for clearing that up - good to know. Didn't mean to attack you, just asking the questions trying to keep it all honest. So should we assume his working/not working list applies here?
Click to expand...
Click to collapse
Don't mind. I really want to let everyone know that the main work was made by sultanqasim as I'm not willing to steal anyone's work. I just want to provide a more current build of his work to the community. Assume some minor things have already been fixed but it's probable that you'll experience camera, nfc, radio... issues here as well... I also hope this'll be fixed soon
I'm really glad to see this coming along! Keep up the good work. I'm not much of a tester normally but I think Im going to give it a shot later tonight and let you know what issues I can find.
krassermensch said:
Don't mind. I really want to let everyone know that the main work was made by sultanqasim as I'm not willing to steal anyone's work. I just want to provide a more current build of his work to the community. Assume some minor things have already been fixed but it's probable that you'll experience camera, nfc, radio... issues here as well... I also hope this'll be fixed soon
Click to expand...
Click to collapse
So glad to see the credits given, and insight to what testers will find.
Didn't want to see any drama, I thanks for putting the time in and squid for laying these ground work!
Sent from my HTC 10 using XDA-Developers mobile app
@krassermensch, thanks for your efforts but... If you're going to publish his work, how about updating the OP with his bug list and the title with pre-alpha. Just so users have more information, instead of the vague "it might be buggy". We know its buggy. Specifics about what works and doesn't is what people would like to know.
This still accurate?
squid2 said:
Currently working:
Display
WiFi
Bluetooth
Sensors
Audio through bluetooth
Broken:
Audio through built in speakers or headphones
RIL
Fingerprint sensor
Camera
Various other smaller things
Click to expand...
Click to collapse
Moderator Information,
Thread has been moved to general, as the OP is only hosting the work for another user.
Hi, I flashed your rom with the open gapps, booted up and connected to wifi and logged in through google. I don't have any cellular connection though. I am making a nano back-up of this and going back to stock until I figure out the cellular connection. Let me know how I can help or report bugs to you.
matteosaeed said:
Hi, I flashed your rom with the open gapps, booted up and connected to wifi and logged in through google. I don't have any cellular connection though. I am making a nano back-up of this and going back to stock until I figure out the cellular connection. Let me know how I can help or report bugs to you.
Click to expand...
Click to collapse
I think the RIL is not working yet which is what you need for the cellular connection. This definitely needs more work before its useable. But really good progress to date.
rav101 said:
I think the RIL is not working yet which is what you need for the cellular connection. This definitely needs more work before its useable. But really good progress to date.
Click to expand...
Click to collapse
Sweet. I can test more at nights when I am at home. Doing the nanodroid now of this build.
---------- Post added at 09:17 PM ---------- Previous post was at 08:52 PM ----------
question, I am trying to go back but I am getting the failed to mount '/system' (invalid argument), any tips on how to bypass that?

[HomeBrews] Pixel 2: LineageOS/CarbonROM/DirtyUnicorns

Dirty Unicorns is a project that started out with no name. It was a project that was first based off AOKP back in the early days of Jelly Bean. In the early days it was just a one man show on one device, the EVO 3D. Since then, many others have joined the project and it has grown exponentially.
We have seen a lot of talent contribute to this project of ours. Big or small, the focus was always on contributing to the community. That is ultimately why we do what we do. After Jelly Bean, we decided to move to a new base, OmniROM. While AOKP was fun, OmniROM proved to be even more exciting base because it challenged us to see what we could do with a project that had different goals in mind. We learned a lot and again, gain contributors. With Lollipop, we moved to an AOSP base with a lot of patches from CAF to make our older devices function as they should. We grew even more and learned a whole lot more.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
CarbonROM is an aftermarket firmware based on the Android Open Source Project. We are dedicated to fast, stable, and feature-filled roms, honesty and communication with our users, and openness with our code. We like frequent builds, with the very latest and greatest hardware support and fixes. We strive to not only provide you with the best rom we can build, but also to give back to the Android community and our fellow developers. For us, this is about creating something we can be proud of and hope you will enjoy.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
LineageOS is a free, community built, aftermarket firmware distribution of Android 8.1 (Oreo), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Pre-Disclaimer:
THIS IS AN UNOFFICIAL BUILD. The intent is to showcase what is coming up soon. I have been working hard on getting Walleye on a level I consider DD ready, especially from a security side of things.
Please keep any problems with those builds in this thread, I don't accept any bug reports for any other builds other than my HomeBrews.
Disclaimer:
While I make every effort to test these builds as much as possible, I am not responsible for anything that may happen to your device. I ask that you do your part to know your device and know how to recover from problems before you flash or post that you broke your phone!
Support:
I spend an astonishing amount of time developing this device. I can't spend much time on XDA as a result, so if you need support, please try the following:
1) Search. Search, search, search. Yes, you. I don't care how unique or important your question is, it's very likely someone has adressed it already. Especially if you're even close to new at this.
2) Ask a question in this forum. Someone will no doubt try to help you. Warning: this help may come in the form of telling you it's a dumb question that has been asked before. See step 1 - such are the perils of asking questions when you haven't done the research yourself. Android is about helping yourself.
Notice:
This build includes GApps for now. We're still working on ways to not prebundle it.
Before you flash, make sure you're on the latest 8.1 stock builds (and bootloader), then flash the ROM in TWRP.
Instructions :
Boot to TWRP
Format Data (If you didn't type YES, you did it wrong!)
adb sideload homebrews.zip
reboot system
(to gain root you must first boot homebrewsROM. Then reboot and to TWRP and install Magisk 1 6.0)
See below
Reporting Bugs:
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved.
What is your--
Build Date:
Did you--
wipe:
all data?
install gapps when you weren't suppose to?
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
WARNING: These are my personal testing builds. They include unmerged, work-in-progress stuff such as SuperUser, Privacy Guard, Google Play services etc. DO NOT FLASH 3RD PARTY GAPPS PACKAGES!
If you see a warning about vendor partition mismatch, you can ignore that in most cases, but before reporting issues you should be on the right version (without the warning).
### RELEASES ###
https://drive.google.com/drive/folders/1NY1j-eH9demisz5Y05jeIPGXipENo5yK?usp=sharing
XDAevDB Information
LineageOS, ROM for the Google Pixel 2
CarbonROM, ROM for the Google Pixel 2
DirtyUnicorns, ROM for the Google Pixel 2
Contributors
Source Code: http://github.com/LineageOS
Source Code: http://github.com/CarbonROM
Source Code: http://github.com/DirtyUnicorns
Source Code: http://github.com/TresReinosDeLeche
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
Version Information
Status: Testing
### DONATE ###
paypal.me/JacobStermer
Created 2018-02-2
Last Updated 2018-03-Today
reserved
Is there really no mainstream support for this device? Everything that comes out, no disrespect, is moonshine lol.
I for one am happy to see it.
iluvamk said:
I for one am happy to see it.
Click to expand...
Click to collapse
Me to ? do we need to flash twrp after the ROM like on pixel 1?
GohanBurner said:
Is there really no mainstream support for this device? Everything that comes out, no disrespect, is moonshine lol.
Click to expand...
Click to collapse
Don't devices that are not officially supported need someone to start the process and possible become a maintainer? I could be mistaken. I myself think moonshine is pretty cool and would love to know how to make it.
Holy crap do my lying eyes deceive me or is there a rom for the Pixel 2 LOL,,,thanks brother for letting me know about this. Now who is going to be the guinea pig and flash it LOL
razrlover said:
Don't devices that are not officially supported need someone to start the process and possible become a maintainer? I could be mistaken. I myself think moonshine is pretty cool and would love to know how to make it.
Click to expand...
Click to collapse
Archangel said:
Holy crap do my lying eyes deceive me or is there a rom for the Pixel 2 LOL,,,thanks brother for letting me know about this. Now who is going to be the guinea pig and flash it LOL
Click to expand...
Click to collapse
I'll flash it I just need more clear instructions. Likes wipes and do I need to flash twrp?
Let us know how it goes brother.
jasonsamms666 said:
I'll flash it I just need more clear instructions. Likes wipes and do I need to flash twrp?
Click to expand...
Click to collapse
jasonsamms666 said:
I'll flash it I just need more clear instructions. Likes wipes and do I need to flash twrp?
Click to expand...
Click to collapse
boot to twrp.
wipe all data
adb sideload lineageos
reboot system.
After first boot then you can flash Magisk for root.
right now i am getting FC on Camera APP, X Google, Ok Google, and T Google something. My computer just crashed building the potential fix.
Ryche666 said:
boot to twrp.
wipe all data
adb push lineageos
reboot to bootloader
boot to twrp
adb push magisk
reboot to system.
right now i am getting FC on Camera APP, X Google, Ok Google, and T mobile something. My computer just crashed building the potential fix.
Click to expand...
Click to collapse
glad i did a backup. i just tried to install it normally and it didn't boot. i got ballsy
jasonsamms666 said:
glad i did a backup. i just tried to install it normally and it didn't boot. i got ballsy
Click to expand...
Click to collapse
Sorry, i got super anxious myself when i finally got playstore, phone, and text messaging working.
Thus the piss poor thread that i copy and pasted from taimen's lineage.
GohanBurner said:
Is there really no mainstream support for this device? Everything that comes out, no disrespect, is moonshine lol.
Click to expand...
Click to collapse
I heard they are working on taimen first then our phone. For the most part it is all their that it seems. ****ty part is they cannot make it official until they find out why you cannot flash gapps.
So the work around is make it unofficial and build gapps inside.
Ryche666 said:
I heard they are working on taimen first then our phone. For the most part it is all their that it seems. ****ty part is they cannot make it official until they find out why you cannot flash gapps.
So the work around is make it unofficial and build gapps inside.
Click to expand...
Click to collapse
FWIW this is what's been done with the Essential Phone.
razrlover said:
Don't devices that are not officially supported need someone to start the process and possible become a maintainer? I could be mistaken. I myself think moonshine is pretty cool and would love to know how to make it.
Click to expand...
Click to collapse
I was the same way. A **** ton of reading and a lot of PMing. It is pretty simple when you get the hang of it. This early in the game you get to see the codes that attract you to certain roms or kernels.
Right now i just need to make sure it is stable before i work on the kernel or choose what rom i am gonna stick with.
NadavCE said:
FWIW this is what's been done with the Essential Phone.
Click to expand...
Click to collapse
That's what i heard. If i knew that last weekend we would have had that much sooner.
Awesome, glad to see some work
Sideloading it worked. Totally clean install- formatted data (as in typed "yes") and pushed the files like described.
*Wouldn't pick up my 5ghz wireless network during setup, but connected once I was in the os.
LTE seems fine, the screenshot is par for what I get around here. Still setting up and testing, but looking good so far!
Thanks @Ryche666
Chronzy said:
Sideloading it worked. Totally clean install- formatted data (as in typed "yes") and pushed the files like described.
*Wouldn't pick up my 5ghz wireless network during setup, but connected once I was in the os.
LTE seems fine, the screenshot is par for what I get around here. Still setting up and testing, but looking good so far!
Thanks @Ryche666
Click to expand...
Click to collapse
Can you share the complete steps and details on how you flashed it? Thank you!
infamousvincci said:
Can you share the complete steps and details on how you flashed it? Thank you!
Click to expand...
Click to collapse
boot to twrp.
wipe all data
adb sideload lineageos
reboot system.
After first boot then you can flash Magisk for root.

Categories

Resources