[UNOFFICIAL][AOSP][KitKat 4.4.2] Cherry Mobile OMEGA HD 2.0 & Lava Xolo Q1000
WARNING: I or xda is not responsible for any kind of damage to your device. Please use it at your own risk!
Feature(s):
- Based on AOSP KitKat 4.4.2
- Custom Kernel 3.4.67
- 13MP main camera & 3MP front camera
- SuperSU v2.46 pre-installed
- BusyBox pre-installed
- init.d supported
- MTP & mass storage mode supported
- And many more...
Credit(s):
- @hyperion70 (Original thread)
- @sai3811
- @Santhosh M
- @MasterAwesome
- @Dr-Shadow
- @superdragonpt
- 4PDA
- XDA
- bq (Aquaris 5 HD kernel source)
- Others not mentioned but also contributed to my worked
Important Note(s):
- Do not update/replace pre-installed BusyBox.
How to install/upgrade from JB to KK:
- Download and install MediaTek MT65xx PreLoader USB VCOM Port
- Download SP Flash Tool v3.1344.0.212
- Download Firmware
- Extract downloaded archive(s) SP Flash Tool and firmware
- Open SP Flash Tool (Flash_Tool.exe)
- Click Scatter-loading button and navigate to the extracted firmware folder
- Load MT6589_Android_scatter_emmc.txt file
- Change UBOOT to match device build (included the the archive)
- Click Firmware -> Upgrade button
- Turn off device, plugin USB cable to phone and PC
- Wait for the process to finish
- After flashing boot to recovery mode by pressing the volume up + power at the same time
- Select Wipe Data and Format Options
- Do Factory Reset
- Reboot device
Download:
- Dev-Host
Flashable Zip via Recovery: (This is for fast flashing or restore only. Be sure you already performed the above upgrade from JB to KK using SP Flash tool before using this flashable zip to avoid any issues.)
- Dev-Host
XDA:DevDB Information
[UNOFFICIAL][AOSP][KitKat 4.4.2] Cherry Mobile OMEGA HD 2.0 & Lava Xolo Q1000, ROM for the Lava Xolo Q1000
Contributors
remzej, Hyperion70
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Stable
Created 2015-03-08
Last Updated 2015-03-07
remzej said:
[UNOFFICIAL][AOSP][KitKat 4.4.2] Cherry Mobile OMEGA HD 2.0 & Lava Xolo Q1000
WARNING: I or xda is not responsible for any kind of damage to your device. Please use it at your own risk!
Feature(s):
- Based on AOSP KitKat 4.4.2
- Custom Kernel 3.4.67
- 13MP main camera & 3MP front camera
- SuperSU v2.46 pre-installed
- Busybox pre-installed
- init.d supported
- MTP & mass storage mode supported
- And many more...
Credit(s):
- @Hyperion70 (Original thread)
- @Sai3811
- @Santhosh M
- @MasterAwesome
- @Dr-Shadow
- @superdragonpt
- 4PDA
- XDA
- bq (Aquaris 5 HD kernel source)
- Others not mentioned but also contributed to my worked
Important Note(s):
- Do not update/replace pre-installed BusyBox.
How to install/upgrade from JB to KK:
- Download and install MediaTek MT65xx PreLoader USB VCOM Port
- Download SP Flash Tool v3.1344.0.212
- Download Firmware
- Extract downloaded archive(s) SP Flash Tool and firmware
- Open SP Flash Tool (Flash_Tool.exe)
- Click Scatter-loading button and navigate to the extracted firmware folder
- Load MT6589_Android_scatter_emmc.txt file
- Click Firmware -> Upgrade button
- Turn off device, plugin USB cable to phone and PC
- Wait for the process to finish
- After flashing boot to recovery mode by pressing the volume up + power at the same time
- Select Wipe Data and Format Options
- Do Factory Reset
- Reboot device
Download:
- http://d-h.st/KNvT
Flashable Zip via Recovery: (This is for fast flashing or restore only. Be sure you already performed the above upgrade from JB to KK using SP Flash tool before using this flashable zip to avoid any issues.)
- http://d-h.st/4g9q
XDA:DevDB Information
[UNOFFICIAL][AOSP][KitKat 4.4.2] Cherry Mobile OMEGA HD 2.0 & Lava Xolo Q1000, ROM for the Lava Xolo Q1000
Contributors
remzej, Hyperion70
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Stable
Stable Release Date: 2015-03-08
Created 2015-03-08
Last Updated 2015-03-07
Click to expand...
Click to collapse
Looking forward for ur new project sir
good job sir remzej, keep up the good work
Many Thanks Sir remzej, Hoping for a Kitkat Colossus... :fingers-crossed:
Thanks you so much sir Rem zej
thanks sir for the great and hard work on our device
Nice work bro, thanks for making good ROM for our devices, downloading it.
Sir Remz,
do you have a mirror for this link? like mediafire? i can't download it here, thanks a lot... more power
remzej said:
[UNOFFICIAL][AOSP][KitKat 4.4.2] Cherry Mobile OMEGA HD 2.0 & Lava Xolo Q1000
WARNING: I or xda is not responsible for any kind of damage to your device. Please use it at your own risk!
Feature(s):
- Based on AOSP KitKat 4.4.2
- Custom Kernel 3.4.67
- 13MP main camera & 3MP front camera
- SuperSU v2.46 pre-installed
- BusyBox pre-installed
- init.d supported
- MTP & mass storage mode supported
- And many more...
Credit(s):
- @hyperion70 (Original thread)
- @sai3811
- @Santhosh M
- @MasterAwesome
- @Dr-Shadow
- @superdragonpt
- 4PDA
- XDA
- bq (Aquaris 5 HD kernel source)
- Others not mentioned but also contributed to my worked
Important Note(s):
- Do not update/replace pre-installed BusyBox.
How to install/upgrade from JB to KK:
- Download and install MediaTek MT65xx PreLoader USB VCOM Port
- Download SP Flash Tool v3.1344.0.212
- Download Firmware
- Extract downloaded archive(s) SP Flash Tool and firmware
- Open SP Flash Tool (Flash_Tool.exe)
- Click Scatter-loading button and navigate to the extracted firmware folder
- Load MT6589_Android_scatter_emmc.txt file
- Click Firmware -> Upgrade button
- Turn off device, plugin USB cable to phone and PC
- Wait for the process to finish
- After flashing boot to recovery mode by pressing the volume up + power at the same time
- Select Wipe Data and Format Options
- Do Factory Reset
- Reboot device
Download:
- Dev-Host
Flashable Zip via Recovery: (This is for fast flashing or restore only. Be sure you already performed the above upgrade from JB to KK using SP Flash tool before using this flashable zip to avoid any issues.)
- Dev-Host
XDA:DevDB Information
[UNOFFICIAL][AOSP][KitKat 4.4.2] Cherry Mobile OMEGA HD 2.0 & Lava Xolo Q1000, ROM for the Lava Xolo Q1000
Contributors
remzej, Hyperion70
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Stable
Created 2015-03-08
Last Updated 2015-03-07
Click to expand...
Click to collapse
Sir @remzej thnx for the update..
---------- Post added at 09:36 AM ---------- Previous post was at 09:35 AM ----------
remzej said:
[UNOFFICIAL][AOSP][KitKat 4.4.2] Cherry Mobile OMEGA HD 2.0 & Lava Xolo Q1000
WARNING: I or xda is not responsible for any kind of damage to your device. Please use it at your own risk!
Feature(s):
- Based on AOSP KitKat 4.4.2
- Custom Kernel 3.4.67
- 13MP main camera & 3MP front camera
- SuperSU v2.46 pre-installed
- BusyBox pre-installed
- init.d supported
- MTP & mass storage mode supported
- And many more...
Credit(s):
- @hyperion70 (Original thread)
- @sai3811
- @Santhosh M
- @MasterAwesome
- @Dr-Shadow
- @superdragonpt
- 4PDA
- XDA
- bq (Aquaris 5 HD kernel source)
- Others not mentioned but also contributed to my worked
Important Note(s):
- Do not update/replace pre-installed BusyBox.
How to install/upgrade from JB to KK:
- Download and install MediaTek MT65xx PreLoader USB VCOM Port
- Download SP Flash Tool v3.1344.0.212
- Download Firmware
- Extract downloaded archive(s) SP Flash Tool and firmware
- Open SP Flash Tool (Flash_Tool.exe)
- Click Scatter-loading button and navigate to the extracted firmware folder
- Load MT6589_Android_scatter_emmc.txt file
- Click Firmware -> Upgrade button
- Turn off device, plugin USB cable to phone and PC
- Wait for the process to finish
- After flashing boot to recovery mode by pressing the volume up + power at the same time
- Select Wipe Data and Format Options
- Do Factory Reset
- Reboot device
Download:
- Dev-Host
Flashable Zip via Recovery: (This is for fast flashing or restore only. Be sure you already performed the above upgrade from JB to KK using SP Flash tool before using this flashable zip to avoid any issues.)
- Dev-Host
XDA:DevDB Information
[UNOFFICIAL][AOSP][KitKat 4.4.2] Cherry Mobile OMEGA HD 2.0 & Lava Xolo Q1000, ROM for the Lava Xolo Q1000
Contributors
remzej, Hyperion70
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Stable
Created 2015-03-08
Last Updated 2015-03-07
Click to expand...
Click to collapse
Sir @remzej thnx for the update..
Thank you Sir Rem Zej...!!!
I am flashing it now and will keep u updated with any lag or issues...:good:
Super Fine Works...!!!
Flashed an hour ago...
This rom is rocking my Xolo Q1000... I Bow to your work Sir RemZej...:good::victory:
Working superfine just like your previous rom PureXperia Z2 v4.3.7a...
Gonna enjoy this KITKAT you brought us (Ofcourse Kitkat ROM) until your next release....Thank you Again Dude...:good:
---------- Post added at 05:56 PM ---------- Previous post was at 05:23 PM ----------
Sir can i flash PurePerformance X v1.4 to this rom?
Please guide
Till now known issues...
Proximity sensor malfunctions during calls...
HELP
Good day sir, please i really need your help and i cant get it in the group since everyone speak Filipino, and i dont understand it, i upgraded to kitkat on my OHD 2.0 build 7 and since then i lost sound on my phone and my phone memory partition became messed up, i used to have internal storage 0.99GB and phone storage 1.47GB but since the upgrade i only have internal storage 2.46GB and phone storage 0.00GB. please sir i really want to revert my partition to the way it was on JB. and if you can point me on the way to patch and return my sound i will be very grateful, thank you sir.
cygnis said:
Good day sir, please i really need your help and i cant get it in the group since everyone speak Filipino, and i dont understand it, i upgraded to kitkat on my OHD 2.0 build 7 and since then i lost sound on my phone and my phone memory partition became messed up, i used to have internal storage 0.99GB and phone storage 1.47GB but since the upgrade i only have internal storage 2.46GB and phone storage 0.00GB. please sir i really want to revert my partition to the way it was on JB. and if you can point me on the way to patch and return my sound i will be very grateful, thank you sir.
Click to expand...
Click to collapse
Bro flash the Stock JB firmware using sp tools...then it will be fine just like before..
cygnis said:
Good day sir, please i really need your help and i cant get it in the group since everyone speak Filipino, and i dont understand it, i upgraded to kitkat on my OHD 2.0 build 7 and since then i lost sound on my phone and my phone memory partition became messed up, i used to have internal storage 0.99GB and phone storage 1.47GB but since the upgrade i only have internal storage 2.46GB and phone storage 0.00GB. please sir i really want to revert my partition to the way it was on JB. and if you can point me on the way to patch and return my sound i will be very grateful, thank you sir.
Click to expand...
Click to collapse
Can you give me the link you downloaded and flashed to your phone? I think you flash the bq Aquaris 5 HD firmware.
abhipanthi said:
Proximity sensor malfunctions during calls...
Click to expand...
Click to collapse
My proximity sensors works well during calls bro.
everytime i flash this, using spftool on first boot i have baseband and IMEI, but the next time i restart my phone i lost my baseband and IMEI, tried all procedures in restoring nvram nothing works
please sir @remzej help
TheCardinal said:
everytime i flash this, using spftool on first boot i have baseband and IMEI, but the next time i restart my phone i lost my baseband and IMEI, tried all procedures in restoring nvram nothing works
please sir @remzej help
Click to expand...
Click to collapse
Be sure to backup your previous IMEI/NVRAM so you can restore it using MTK Droid Tools.
abhipanthi said:
Flashed an hour ago...
This rom is rocking my Xolo Q1000... I Bow to your work Sir RemZej...:good::victory:
Working superfine just like your previous rom PureXperia Z2 v4.3.7a...
Gonna enjoy this KITKAT you brought us (Ofcourse Kitkat ROM) until your next release....Thank you Again Dude...:good:
Click to expand...
Click to collapse
Please sir, I get an error message when flashing the Unofficial AOSP via so flastool, after loading scatter file and clicking on firmware upgrade, the error says " please make sure all necessary image file are checked to be downnloaded for "firmware upgrade"", please sir how did you pass through firmware upgrade when all files are not selected in scatter file?
Almost after an year of black patch problem in playstore and various other apps are fixed... Its a delight to use your app.. Thanks a lot.
Stock ROM Elephone P8000_20151203_Android 5.1
Original Site : http://bbs.elephone.hk/thread-9415-1-1.html#.VmgPgvk95dh
Code:
Changelog
Solved- power down problem when battery goes to 1%
Solved- static screen when boot
Download link: https://mega.nz/#!ZgR23BYA!IRl9geakWlCOWRgPx2kVhf-ehzV-DbkhaW52stY8FX4 (OTA update is supported)
ROM flashing tutorial: http://bbs.elephone.hk/thread-1037-1-1.html#.VWgkX_RAU-0
Thanks for sharing
Sent from my Oneplus One using Tapatalk
When will the global version of the redmi note 8 pro (PGGMIXM) receive the Android 10 update. I still haven't received the new update.
look for either the telegram channels or download directly to your phone and run the update tool:
Check here
For me, it's working flawlessly regarding the fact I'm just a regular user. Initially was reported as a beta but later as an official release. As I said, I just downloaded and ran the update tool.
I also used XiaomiADBFastbootTools to make a basic debloat and I use nova launcher as default
Could you please post the telegram group link here or message me?
Unfortunately, the telegram link has been removed
Update: Still haven't got the update via OTA
https://forum.xda-developers.com/redmi-note-8-pro/how-to/redmi-note-8-pro-android-10-public-t4072795
Thanks for the help but I'm waiting for the OTA update since its more secure and trusted.
I'm confused - could you please let me know which MIUI version will have Android 10?
I currently have MIUI Global 11.03 | Stable 11.0.3.0 - but it says Android 9 - PPR1.180610.011 / Security updates 2019-11-01
Selter said:
I'm confused - could you please let me know which MIUI version will have Android 10?
I currently have MIUI Global 11.03 | Stable 11.0.3.0 - but it says Android 9 - PPR1.180610.011 / Security updates 2019-11-01
Click to expand...
Click to collapse
All versions will receive the Android 10 update, some versions like the European version have already received the update while the global version PGGMIXM still haven't received the update.
You can click on the link above and download the update and install it manually, but its better to wait for to update automatically.
Closed Per OP Request
Keep in mind this is not a ROM, this is only firmware. which is usually needed when installing cusrom, with a small size of about 70MB +
Firmware Oreo : download
Firmware 065 : download
Firmware 067 : download
Firmware 069 : download
Firmware 070 : download
Firmware 075 : download
i have a mazda3 2011 with android head unit .
it rebooted and stay on mazda logo.
i can enter to recovery but i dont know with firmware is ok for my head unit.
it had nadroid 5.1.1
pictures :
MTCB/MTCC rk3188 (5.1.1) Firmware
For convenience, latest MicroG & Open GApps enabled MTCB/MTCC firmware, in a suitable thread. Updated on July 3, 2018: (reason in post #636) MicroG in post #396, and here: Mod Edit :- Links Removed Mod Edit :- Links Removed Open GApps in post...
forum.xda-developers.com