Develop Bugs

Custom recovery.

Hi, guys
For some time didn't visit the site. Now bought T-mo S4 M-919.
Last 3 days running sleep deprived LOL. Trying to install either CWM, CWM-touch, TWIRP.... ANYTHING!!!!
Used Odin 3.07, 1.85, operation completes in 2.03 minutes and yellow square on the top of Odin menu says PASS.
Then again, booting into recovery and getting recovery (3e), stock I assume.
D-loaded all drives, Kies, whatever was suggested in several posts. Read and searched for 3 days, eyes are bleeding already... LOL
Installed custom recoveries on multiple devices HD2, Asus Transformer, dreaded Viewsonic G-tab, HTC Sensation 4g...
Never had such a tough time.
What am I doing wrong? Did anyone else had such a problem?
Any advice is greatly appreciated!!!
Tester.

Are you rooted? You could try installing from Rom Manager app itself.

Thanks.
stevessvt said:
Are you rooted? You could try installing from Rom Manager app itself.
Click to expand...
Click to collapse
Thank you for your fast response.
I read somewhere to disable auto-reboot in Odin and turn off the phone by pulling the battery.
So, I tried it and it WORKED!!!!!
Now I'm with CWM and rooted!!!! And Happy!!
Thanks again.
Tester.

Tester30 said:
Hi, guys
For some time didn't visit the site. Now bought T-mo S4 M-919.
Last 3 days running sleep deprived LOL. Trying to install either CWM, CWM-touch, TWIRP.... ANYTHING!!!!
Used Odin 3.07, 1.85, operation completes in 2.03 minutes and yellow square on the top of Odin menu says PASS.
Then again, booting into recovery and getting recovery (3e), stock I assume.
D-loaded all drives, Kies, whatever was suggested in several posts. Read and searched for 3 days, eyes are bleeding already... LOL
Installed custom recoveries on multiple devices HD2, Asus Transformer, dreaded Viewsonic G-tab, HTC Sensation 4g...
Never had such a tough time.
What am I doing wrong? Did anyone else had such a problem?
Any advice is greatly appreciated!!!
Tester.
Click to expand...
Click to collapse
Just flash a zip through recovery, it takes a couple of seconds...
http://forum.xda-developers.com/showthread.php?p=43469920

Yeah sometimes it doesn't take the first time so you might have to do it a couple times.
Sent from my SGH-M919 using Tapatalk 2

norml said:
Just flash a zip through recovery, it takes a couple of seconds...
http://forum.xda-developers.com/showthread.php?p=43469920
Click to expand...
Click to collapse
richardlibeau said:
Yeah sometimes it doesn't take the first time so you might have to do it a couple times.
Sent from my SGH-M919 using Tapatalk 2
Click to expand...
Click to collapse
Thanks, guys!
Now I'm happy with my CWM, maybe later will install TWRP, I like more options in TWRP.
The goal right now is to figure out what bloatware is safe to remove without compromising performance and install all my old programs through the Titanium back up.
It means more reading... LOL.
Tester.

Some custom roms need to update recovery before a flash. How to update recovery without risk ?
Sent from my SGH-M919 using xda premium

Tester30 said:
Thanks, guys!
Now I'm happy with my CWM, maybe later will install TWRP, I like more options in TWRP.
The goal right now is to figure out what bloatware is safe to remove without compromising performance and install all my old programs through the Titanium back up.
It means more reading... LOL.
Tester.
Click to expand...
Click to collapse
Back up all the bloat with titanium.
Make a full nandroid backup of the rom.
Then delete anything you want. If it breaks restore it with titanium. If it really breaks do a full nandroid restore.
Sent from my SGH-M919 using xda app-developers app
---------- Post added at 09:07 PM ---------- Previous post was at 09:06 PM ----------
jfernandezv said:
Some custom roms need to update recovery before a flash. How to update recovery without risk ?
Sent from my SGH-M919 using xda premium
Click to expand...
Click to collapse
Say what now? What do you mean update recovery?
Sent from my SGH-M919 using xda app-developers app

[OTA ZIP] OFFICIAL 4.3 update zip [HAS KNOX BOOTLOADER]

You must be on 100% stock odexed MD4 to flash this (rooted/unrooted doesn't matter)
Just posting this here for people to find it easily
All credits to @poit and @edfunkycold!
poit said:
And thanks to edfunkycold we have the link to the update:
http://android.clients.google.com/p...50053.USER_L710_SPR_MD4_to_MK3_Update_FWD.zip
Click to expand...
Click to collapse
Mirror: http://www.androidfilehost.com/?fid=23212708291680782
---
What does voiding Knox mean? Boot loader flag goes from 0x0 to 0x1
Notes about Knox:
FLASHING A: CUSTOM KERNEL or CUSTOM RECOVERY on MK3 boot loader VOIDS KNOX
CANNOT DOWNGRADE TO OLDER FIRMWARE!
Composed of an OS side and firmware (bootloader-side) implementation. Apps (OS components) can be removed, but the firmware components CANNOT.
You can still root on the new firmware...but you can't flash a custom recovery or custom kernel, or else you will trip Knox

First!!!!
Damn we need a way to get rid of KNOX!!!!!!.... LOL

Thank you CNexus....Could I flash this file with custom recovery TWRP or Rooted 4.1.2 phone...or I have to return stock?

anees02 said:
Thank you CNexus....Could I flash this file with custom recovery TWRP or Rooted 4.1.2 phone...or I have to return stock?
Click to expand...
Click to collapse
You have to return to stock
Sent from my SPH-L710 using Tapatalk

anees02 said:
Thank you CNexus....Could I flash this file with custom recovery TWRP or Rooted 4.1.2 phone...or I have to return stock?
Click to expand...
Click to collapse
You have to be unrooted stock. It needs stock recovery. The zip is just like you taking a OTA update.

Speedin07si said:
You have to be unrooted stock. It needs stock recovery. The zip is just like you taking a OTA update.
Click to expand...
Click to collapse
Go to this thread, worked perfectly for me
http://forum.xda-developers.com/showthread.php?t=1904099
Sent from my SPH-L710 using Tapatalk
---------- Post added at 02:10 PM ---------- Previous post was at 02:10 PM ----------
anees02 said:
Thank you CNexus....Could I flash this file with custom recovery TWRP or Rooted 4.1.2 phone...or I have to return stock?
Click to expand...
Click to collapse
Worked great for me, use this method
http://forum.xda-developers.com/showthread.php?t=1904099
Sent from my SPH-L710 using Tapatalk

lordnykon21 said:
Go to this thread, worked perfectly for me
http://forum.xda-developers.com/showthread.php?t=1904099
Sent from my SPH-L710 using Tapatalk
---------- Post added at 02:10 PM ---------- Previous post was at 02:10 PM ----------
Worked great for me, use this method
http://forum.xda-developers.com/showthread.php?t=1904099
Sent from my SPH-L710 using Tapatalk
Click to expand...
Click to collapse
I'm in the process of doing this right now lol. I was debating on going back to stock or just waiting till one of the many talented devs figured something out.

Speedin07si said:
I'm in the process of doing this right now lol. I was debating on going back to stock or just waiting till one of the many talented devs figured something out.[/QUOTE
According to the great minds here, it has to be like stock, it's essentially like receiving the ota.
Sent from my SPH-L710 using Tapatalk
Click to expand...
Click to collapse

lordnykon21 said:
Go to this thread, worked perfectly for me
http://forum.xda-developers.com/showthread.php?t=1904099
Sent from my SPH-L710 using Tapatalk
---------- Post added at 02:10 PM ---------- Previous post was at 02:10 PM ----------
Worked great for me, use this method
http://forum.xda-developers.com/showthread.php?t=1904099
Sent from my SPH-L710 using Tapatalk
Click to expand...
Click to collapse
Then I have to download 834MB file size in order to flash 495MB file size
Is it any way to flash stock recovery and make unrooting by supersu itself?

If you already have a stock rom and recovery installed and you don't have an sd card handy, it's easy to update the zip using ADB sideload. Assuming you have used ADB before and know how to use it on your computer
Download the file and rename it something easy like "update.zip"
reboot the phone into recovery by pressing volume up, home, and power
select the option to update via ADB
plug in phone to computer with USB cable
on your computer open a terminal window and if you want to make sure the ADB connection works type "ADB devices" you should see some numbers listed followed by "sideload"
flash the file by typing "adb sideload update.zip" if you named it update.zip that is, then press enter
once it's done hit the power button to reboot
profit??

Ok I know this is a dumb question does it have to be on sd card or internal card for recovery to pick it up
Sent from my SPH-L710 using xda premium

evo3d6 said:
Ok I know this is a dumb question does it have to be on sd card or internal card for recovery to pick it up
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
if you are trying to flash it from the phone it needs to be on an external SD card.

I'm hearing rooting is not working after the update.
Sent from my Nexus 5 using Tapatalk

So, I know this is supposed to be the official update, and I flashed via adb, but KIES and SprintZone don't seem to understand that. The two screenshots show what I'm talking about. These should both say "current" or "Up to date"

Do u need to be unrooted or can I just reinstall my rooted stock ROM and do the update
rocking the 4.4

ruthlessptizzle said:
Do u need to be unrooted or can I just reinstall my rooted stock ROM and do the update
rocking the 4.4
Click to expand...
Click to collapse
Just updated OP, check it again

I just checked it about two hours ago and the update wasn't there....but u have it from somewhere else
rocking the 4.4
---------- Post added at 10:13 PM ---------- Previous post was at 10:13 PM ----------
Ment I have it from a download I got
rocking the 4.4

counterfeit187 said:
So, I know this is supposed to be the official update, and I flashed via adb, but KIES and SprintZone don't seem to understand that. The two screenshots show what I'm talking about. These should both say "current" or "Up to date"
Click to expand...
Click to collapse
This is what Kies says for my phone. Samsung Kies doesn't know Sprint's update is available. Wait for the OTA.

Razorwindmo46 said:
This is what Kies says for my phone. Samsung Kies doesn't know Sprint's update is available. Wait for the OTA.
Click to expand...
Click to collapse
After the update you have to use Kies3
Sent from my Nexus 7 using Tapatalk

counterfeit187 said:
After the update you have to use Kies3
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
I didn't use this download. I'm still on MD4. I'll wait awhile to see if anyone has issues with this dl since I'm not on Sprint. I'm using Ting for a provider.

Bricked Note 2 - help needed

Hello
Got a Note 2 (N7100), boots up to the Samsung Logo and stays like that, basically that's called a soft-brick?
I'm familiar to Odin flashing, custom recovery flashing and so on - what are the steps to be done here?
Is there anything like a stock recovery ROM you can point me at, that i can flash using ODIN & the steps to follow?
Thanks very much, really appreciated
:good:

alexandruvlad said:
Hello
Got a Note 2 (N7100), boots up to the Samsung Logo and stays like that, basically that's called a soft-brick?
I'm familiar to Odin flashing, custom recovery flashing and so on - what are the steps to be done here?
Is there anything like a stock recovery ROM you can point me at, that i can flash using ODIN & the steps to follow?
Thanks very much, really appreciated
:good:
Click to expand...
Click to collapse
Download mode > flash philz v5.00.5 through odin > download custom rom > go to recovery > flash the custom ROM > when everything works you can choose to keep using the rom or to get a stock one from Sammobile.
Sent from my GT-N7100 using Tapatalk

OverDub said:
Download mode > flash philz v5.00.5 through odin > download custom rom > go to recovery > flash the custom ROM > when everything works you can choose to keep using the rom or to get a stock one from Sammobile.
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
Shouldn't I install a stock rom first (using PIT file + repartition, if it doesn't boot up without repartition ticked - for example) ?
Thanks a lot for your help

alexandruvlad said:
Shouldn't I install a stock rom first (using PIT file + repartition, if it doesn't boot up without repartition ticked - for example) ?
Thanks a lot for your help
Click to expand...
Click to collapse
The method I put is the extra safe method so u won't be bothered with hard stuff, do it and it should work, or at least just get out of the bootloop u r into.
Sent from my GT-N7100 using Tapatalk

OverDub said:
The method I put is the extra safe method so u won't be bothered with hard stuff, do it and it should work, or at least just get out of the bootloop u r into.
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
Many thanks, just worried because i got the phone in this condition for a very affordable price and wanted to fix it someone after reading here on the forum that it's really hard to permanently damage a Note 2 phone, especially when the Samsung Logo boots up.
Hopefully it will work properly after i try the offered method

alexandruvlad said:
Many thanks, just worried because i got the phone in this condition for a very affordable price and wanted to fix it someone after reading here on the forum that it's really hard to permanently damage a Note 2 phone, especially when the Samsung Logo boots up.
Hopefully it will work properly after i try the offered method
Click to expand...
Click to collapse
Keep me updated and good luck, please remember that custom roms like DittoNote3 or phoenix really enhance Ur experience, giving u the note 3 features and many other options, good luck.
With Regards,
Overdub
Sent from my GT-N7100 using Tapatalk
---------- Post added at 11:57 PM ---------- Previous post was at 11:55 PM ----------
alexandruvlad said:
Many thanks, just worried because i got the phone in this condition for a very affordable price and wanted to fix it someone after reading here on the forum that it's really hard to permanently damage a Note 2 phone, especially when the Samsung Logo boots up.
Hopefully it will work properly after i try the offered method
Click to expand...
Click to collapse
Also please remember that you need philz 5.00.5 not the latest one, the latest one won't boot (not for me) and philz 5.00.5 is a very successful version of philz.
Sent from my GT-N7100 using Tapatalk

OverDub said:
Keep me updated and good luck, please remember that custom roms like DittoNote3 or phoenix really enhance Ur experience, giving u the note 3 features and many other options, good luck.
With Regards,
Overdub
Sent from my GT-N7100 using Tapatalk
---------- Post added at 11:57 PM ---------- Previous post was at 11:55 PM ----------
Also please remember that you need philz 5.00.5 not the latest one, the latest one won't boot (not for me) and philz 5.00.5 is a very successful version of philz.
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
Thanks a lot, just found that version!
Looking forward on bringing good news!

[Q&A] [ROM|Stockish|NO KNOX] 8/7/15 Sprint TouchWiz Lollipop 5.1.1 (N910PVPU4COG5)

[Q&A] [ROM|Stockish|NO KNOX] 8/7/15 Sprint TouchWiz Lollipop 5.1.1 (N910PVPU4COG5)
Q&A for [ROM|Stockish|NO KNOX] 8/7/15 Sprint TouchWiz Lollipop 5.1.1 (N910PVPU4COG5)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM|Stockish|NO KNOX] 8/7/15 Sprint TouchWiz Lollipop 5.1.1 (N910PVPU4COG5). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Flashing Kernel on OG5 5.1.1
I recently updated to the Sprint 5.1.1 and tried to root using odin and did not achieve root. However, now the phone gives an error when trying to do OTA update. How do I flash this kernel? Do I use odin to flash it or do I use the regular recovery

VIPDMERC said:
I recently updated to the Sprint 5.1.1 and tried to root using odin and did not achieve root. However, now the phone gives an error when trying to do OTA update. How do I flash this kernel? Do I use odin to flash it or do I use the regular recovery
Click to expand...
Click to collapse
The kernel is flashed in TWRP recovery. Odin that, making sure you've selected the option to disable OEM lock in Odin 3.10.6 and do not select auto reboot. When done with the TWRP Odin flash, pull USB and battery, wait 30 seconds, reboot to recovery and flash kernel.
Are you having trouble with Odin or boot? CF Auto Root is not used to root OG5. After flashing the kernel, flash the rooted ROM or root with SuperSU zip if just wanting to root stock and boot.
Sent from my SM-N910P using Tapatalk

Getting Root
Not to familiar with everything, however I tried flashing CF Autoroot, i downloaded the beastmode kernel already. Just tryung to figure out how to get root with SU and how to flash TWRP. Recetly got this new phone from sprint, got the last one stuck in a bootloop.
Downloading the deodex file now, just need to k ow what to do step by step if possible. I really appreciate your assistance

VIPDMERC said:
Not to familiar with everything, however I tried flashing CF Autoroot, i downloaded the beastmode kernel already. Just tryung to figure out how to get root with SU and how to flash TWRP. Recetly got this new phone from sprint, got the last one stuck in a bootloop.
Downloading the deodex file now, just need to k ow what to do step by step if possible. I really appreciate your assistance
Click to expand...
Click to collapse
Maybe this will help?
http://forum.xda-developers.com/showthread.php?p=62241848
Sent from my SM-N910P using Tapatalk

Im on the deodexed version can i use viper sound mod or 3 minit battery mod?

5.1.1 lollipop stockish rom
Help!! Is it possible to flash this rom to my note 4. Im coming from cm12.1. I really hate this rom and i really want stock back. Does anybody have detailed instructions to flash this to my phone? I am currently running cm 12.1 5.1.1

What baseband are u on

Note 4
Boe1

Will it work to go from boe1 to cog5? From cm12.1?

U have to flash the baseband so u can flash this rom
---------- Post added at 11:40 AM ---------- Previous post was at 11:37 AM ----------
dvtmg704 said:
U have to flash the baseband so u can flash this rom
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=3174350

5.1.1 lollipop stockish rom
Thanks soooooo much! Now i have the baseband version i need. So now can you wqlk me through the steps of wiping and installing? I know how to do everything else but not the wiping. I know that you dont wipe the sd card. Bu i still need help thanks!

U have to use odin to flash it

No wiping or anything? Just flash it. Wont that brick?

Just flash the og5 baseband in odin select AP then select the baseband then flash then u can flash this rom

knoxjosh39 said:
No wiping or anything? Just flash it. Wont that brick?
Click to expand...
Click to collapse
Did u get it working

samep said:
The kernel is flashed in TWRP recovery. Odin that, making sure you've selected the option to disable OEM lock in Odin 3.10.6 and do not select auto reboot. When done with the TWRP Odin flash, pull USB and battery, wait 30 seconds, reboot to recovery and flash kernel.
Are you having trouble with Odin or boot? CF Auto Root is not used to root OG5. After flashing the kernel, flash the rooted ROM or root with SuperSU zip if just wanting to root stock and boot.
Sent from my SM-N910P using Tapatalk
Click to expand...
Click to collapse
Uh oh. Lol. I did not see or tick any oem lock etc. I just pulled battery and flashed the kernel in twrp. All seems well. About to flash the odex rom. If i should worry please let me know? Afak im ok?
Sent from my SM-N910P using XDA Free mobile app

Droid2drummer said:
Uh oh. Lol. I did not see or tick any oem lock etc. I just pulled battery and flashed the kernel in twrp. All seems well. About to flash the odex rom. If i should worry please let me know? Afak im ok?
Sent from my SM-N910P using XDA Free mobile app
Click to expand...
Click to collapse
AFAIK you may be OK despite that. I keep seeing that on the web so I thought maybe that's why OE1 thru OG5 bootloaders are giving fits and bricks (semi-bricks).
It may only apply to full tars; did you OTA or KIES to OG5?
The saga continues... feedback like this helps. Thanks!

samep said:
AFAIK you may be OK despite that. I keep seeing that on the web so I thought maybe that's why OE1 thru OG5 bootloaders are giving fits and bricks (semi-bricks).
It may only apply to full tars; did you OTA or KIES to OG5?
The saga continues... feedback like this helps. Thanks!
Click to expand...
Click to collapse
Seem fine. Just flashed this rom. Freeza stock. ..so far great. But for the love of android, still my weather animations in stock weather are frozen. Not moving. Anyone??
Sent from my SM-N910P using XDA Free mobile app
---------- Post added at 06:03 AM ---------- Previous post was at 06:01 AM ----------
Droid2drummer said:
Seem fine. Just flashed this rom. Freeza stock. ..so far great. But for the love of android, still my weather animations in stock weather are frozen. Not moving. Anyone??
Sent from my SM-N910P using XDA Free mobile app
Click to expand...
Click to collapse
This is pissing me off now...since ota of 5.1.1 officially ota 'd. Ive had great everything for a change. But weather animations borked. Nobody else mentioned it anywhere. So i dont get it. Ive wiped flashed reset etc.
Sent from my SM-N910P using XDA Free mobile app

Droid2drummer said:
Seem fine. Just flashed this rom. Freeza stock. ..so far great. But for the love of android, still my weather animations in stock weather are frozen. Not moving. Anyone??
Sent from my SM-N910P using XDA Free mobile app
---------- Post added at 06:03 AM ---------- Previous post was at 06:01 AM ----------
This is pissing me off now...since ota of 5.1.1 officially ota 'd. Ive had great everything for a change. But weather animations borked. Nobody else mentioned it anywhere. So i dont get it. Ive wiped flashed reset etc.
Sent from my SM-N910P using XDA Free mobile app
Click to expand...
Click to collapse
Since you have a OG5 tar, now you can wipe it and clean install Odin to fix that.
Maybe try that oem lock disabled this time? Odin 3.10.6
Sent from my SM-N910P using Tapatalk

Custom Recovery after 4.4.2?

Hello XDA community,
So I've owned the Note II since it came out basically. I used to ODIN custom recoveries and flash ROMs to it all the time. After the last update (4.4.2), I ODIN my phone back to stock to get the update; which of course included the dreaded KNOX. Afterwards, I just left it be due to the KNOX security and fear of messing up the phone. Long story short, I've been out of the loop for a couple of years and recently I've had the urge to try some of the newer ROMs and what not. More than likely this urge has spawned from the fact that I'll be doing away with my Note II soon, as it's very old and dated. So the fear of messing it up, has some what diminished.
So my question is... Is there anything special that I have to do before attempting to load a custom recovery after the 4.4.2 firmware update? Do I have to downgrade my current stock firmware first? Or is it still the same as it was before 4.4.2, just using ODIN to push the recovery and reboot? Any help is greatly appreciated! :victory:

Even with knox there is a chainfire setup. Trips knox but your out of warranty anyway. Just follow threads for your note 2. Mine is att.
Sent from my SAMSUNG-SGH-I317 using Tapatalk

abonides said:
Even with knox there is a chainfire setup. Trips knox but your out of warranty anyway. Just follow threads for your note 2. Mine is att.
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Click to expand...
Click to collapse
Wow, Thanks for the quick response! Would you mind looking through these instructions right quick, and see if I'm safe to go with this method?
ROOT AT&T GALAXY NOTE 2 AND INSTALL TWRP RECOVERY
1.) Download and extract CF-Auto-Root-t0lteatt-t0lteatt-samsungsghi317.zip to your PC. You’ll get an Odin flash-able file in the .tar.md5 format.
2.) Flash the CF-Auto-Root-t0lteatt-t0lteatt-samsungsghi317.tar.md5 using Odin. You can follow our exclusive guide on flashing firmware using Odin
3.) During the CF Auto-root process, if the device is stuck at bootlogo, remove the battery and boot into recovery mode manually to start the rooting process.
4.) Once the flashing process is finished, reboot the device and open the SuperSU app. If you encounter any KNOX warnings, then follow the instructions given in our KNOX disabling guide
5.) If everything is fine on the rooting end, download the latest Odin flash-able TWRP recovery from the Official TWRP page
6.) The recovery is in the form of .tar package, flash it using the Odin guide
7.) Reboot the device into recovery mode and check if the recovery is installed properly.

That looks like the right one. Been awhile my note is still going. Getting oppo r7s soon. But yes looks correct. Good flashing.
Sent from my SAMSUNG-SGH-I317 using Tapatalk

abonides said:
That looks like the right one. Been awhile my note is still going. Getting oppo r7s soon. But yes looks correct. Good flashing.
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Click to expand...
Click to collapse
Oh Nice! A guy I work with was just telling me about the oppo. He's also talking about getting it. It looks like a beast, from what I've seen on it.

Looks nice...metal body. 1/2 price of new note . lol and a flip phone beats an I device. Ha ha haaa
Sent from my SAMSUNG-SGH-I317 using Tapatalk

abonides said:
That looks like the right one. Been awhile my note is still going. Getting oppo r7s soon. But yes looks correct. Good flashing.
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Click to expand...
Click to collapse
Not sure where I went wrong. I factory reset my phone before I even started. Pushed the ROOT using ODIN 3.10. Everything went fine, the phone rebooted and came back with "SuperSU stopped working" ,"Youtube stopped working", "Maps stopped working." Unable to open any of those apps. I factory reset again, and cleared the cache, but still no luck. Any suggestions for me?

Only thing I can think is su needs to be re flashed
Sent from my SAMSUNG-SGH-I317 using Tapatalk
---------- Post added at 03:41 PM ---------- Previous post was at 03:40 PM ----------
I had once during root nothing opened. I flashed stock again then re flash SU then all good
Sent from my SAMSUNG-SGH-I317 using Tapatalk

abonides said:
Only thing I can think is su needs to be re flashed
I had once during root nothing opened. I flashed stock again then re flash SU then all good
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Click to expand...
Click to collapse
Tried to re-flash SuperSU, but still no luck. However, after all the other apps finished updating - I can use youtube and maps again. yay! lol.
By re-flashing stock, do you mean using ODIN to push a stock firmware back over to the phone? Did the stock 4.4.2 firmware ever leak out after release?
By the way, I really appreciate your advice on all this.

I did a 4.3 stock. Then I flashed DN3. But yeah gapps can be a pain too. Slipped my mind lol.
Yw for the tips but you're doing it . lol Have fun.
Sent from my SAMSUNG-SGH-I317 using Tapatalk

abonides said:
I did a 4.3 stock. Then I flashed DN3. But yeah gapps can be a pain too. Slipped my mind lol.
Yw for the tips but you're doing it . lol Have fun.
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Click to expand...
Click to collapse
I ended up going about it a different way, but I don't think I would of tried it without you talking me through some of it. Although it's not a lot, I donated to you so you could at least have a beer on me. Thanks brother. KCCO.

Greatly appreciated & good luck with everything. We are all here to help each other.
Sent from my SAMSUNG-SGH-I317 using Tapatalk