MOD Tinted Framework for CM 13 Beta 3, AOSP 6.0.1 MMB29M, and other custom rom [UPDATED]
Now i will share how to make your nav bar can be same get tinted color from your statusbar easy without any modification and xposed module. First of all give thanks to @idid idamrep for him thread to make it for all cyanogenmod device in this Thread. And i only make it easy here so you all can try it without any worry from false modification or any hard think again.
this mod i confirm work for CM 13 Beta 3, AOSP 6.0.1 MMB29M,cm12.1 build 20150913 and archidroid v3.1.3,Stryflex v1.0 LP,Enfriar Z5,Ressurection Remix and many other custom rom if you want request it
and this now including for new device : condor (Moto E) and that's report work for this custom rom for condor user ..
Resurrection Remix and Euphoria OS
flashable zip now is included on this new build
how to install:
1. Copy zip file to your external sd card, and go to recovery mod
2. flash zip file on your recovery mod and follow it all instruction in aroma interface, after that reboot it
3. and check for some apps and let's see tinted color on your navbar
new installation progress for AOSP 6.0 MRA58K and up:
NEW Installation Method for marshmallow build with encrypted ext-sdcard:
1. download new TWRP build from @cucumber09 http://forum.xda-developers.com/showpost.php?p=64433308&postcount=166 choose with no sd.
2. flash it using dd if method, copy downloaded FOTARecovery to your sdcard and rename it to twrp.img and open terminal emulator. and type this...
su
dd if=mnt/sdcard/twrp.img of=/dev/block/platform/msm_sdcc.1/by-name/FOTAKernel
3. after done go to recovery mode with inserted sdcard. and let's wait until it get to TWRP menu
4. after done connect your phone to your pc using cable data and let's wait until your pc read your internal storage (if not go to mount option and choose disable mtp menu and re-enable it again)
5. after done copy my mod to internal storage and flash it normally using install menu on recovery
6. after complete reboot your phone and done
Have fun!!!
Installation method for marshmallow build without encrypted ext-sdcard :
1. download my mod and copy to your ext-sdcard
2. go to recovery mode and flash it in Install menu on TWRP
3. after complete , restart and done
and this for screenshot from this mod...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
that's all, and have try!!!
NEW Aroma installer is already included in this new build :laugh:
Started from build 20150913 for cm 12.1
Latest version build 20151019 for cm 12.1
and this for log installation
View attachment 3507227
- NEW INFORMATION FOR BUILD 20151014 AND UP
this is requirement for installation new build ( only for who want need installation log from aroma installer)
- you must using latest twrp recovery v 2.8.7.0
- if you're using theme materialsed you need to set using custom lockscreen ui in paint icon
- if not try to set using custom lockscreen in twrp option menu
this for download link
AndroidFileHost Link
and this download link for CyanogenMod 12.1 Nightly
Android File Host
new download link for AOSP 6.0 MMB29M
https://www.androidfilehost.com/?w=files&flid=42169
new download link for Moto E device
https://www.androidfilehost.com/?w=files&flid=42346
NEW AROMA BUILD IS UP FOR CM 13 BETA 3 Have try all
New download link for CM 13 Beta 3
https://www.androidfilehost.com/?w=files&flid=45308
and this log file from latest AROMA Installer
View attachment MTF_cm13_beta2-AROMA-nicki.zip.log.txt
Changelog
v 1.8.3 (Stable) AROMA
- fix loading progress bar on AROMA installer
- delete sleep script to avoid long time sleep after finished execute AROMA
- please create log after complete installation in AROMA on installation menu to avoid sleep after finished execute AROMA
- updated compatibility with cm 13 beta 3 MMB29M
v 1.8.2 (Beta) AROMA
- Added Aroma Installer (Initial RELEASE) for Marshmallow build
- Updated Compatibility with CM 13 BETA 2 MMB29M
- Updated Compatibility with AOSP 6.0.1 MMB29M
- Updated Compatibility with CM 13 BETA 1 MDB08M
- Installation progress move to adb sideload on twrp recovery
- Reconfigure sleep exec file to fix black screen after installation
- Added New Installation Guide on Thread
v 1.8 (Alpha)
- Updated Compatibility with AOSP 6.0.1 MMB29M
- Updated Compatibility with CM 13 BETA 1 MDB08M
- Installation progress move to adb sideload on twrp recovery
v 1.7.6 (STABLE) AROMA
- Revert compiled with apktool v 2.0.1 (fix for compatibility based on Resurrection Remix ROM)
- Added signed apk for framework-res.apk
- Added compatibility for condor device (Moto E)
- Added compatibility for Euphoria OS for condor
- Added compatibility for Resurrection Remix v5.5.8 for nicki device (Xperia M)
v 1.7.5 (Stable) AROMA
- Compiled with new apktool v 2.0.2
- Updated Compatibility with CM 12.1 Build 20151015
- Added new system requirement for installation (available on xda thread)
- Fix not responding after create log in aroma menu (fix from TWRP updated)
- Change command for set_perm_recursive to set_perm only direct to framework-res.apk
- Fix for unknown codename device in aroma interface
v 1.7 (Stable) AROMA
- Included Aroma installer for better installation progress
- Added new aroma binary 3.00b1 - MELATI for better interface
- Fixed updater script that won't execute on new binary
- Added more themes in aroma installer for better interface
- Resize to HDPI size for better installation
- Fix unknown string text for english and indonesian language
- Fix unknown query installation step in aroma
- Fix black screen after complete installation (added sleep exec file)
- Added command to delete old framework-res.apk
- Revert extraction command to system
- Updated Compatibility with CM 12.1 build 20150913
Version 1.3 (Stable)
- Updated Compatibility with cm12.1 build 20150911
- Compiled with new apktool v 2.0.1
Version 1.2 (Stable)
- Updated Compatibility with Archidroid v3.1.3
- Updated Compatibility with Stryflex LP 1.0
- Updated Compatibility with Enfriar Z5
- Rebuilt package extract file command to fix unknown extract directory (already include from build 20150830)
Version 1.1 (Stable)
- Updated Compatibility with cm12.1 build 20150907
- Now included flashable zip for installation in recovery mode
Version 1.0 (Testing Stage):
- INITIAL RELEASE
Announcement & Known Bugs
Announcement List :
- for CM Nightly version, i can't do every nightly to update this mod during my internet limit quota. if you want it you just need upload your framework-res.apk and tell me
- this mod can be apply to another custom rom and another devices based on android 5.1.x, so if another rom beside cyanogenmod want try it, you just need upload your framework-res.apk and i will work it for you.
- if anyone having bug , crash , problem and question and just write it on this thread and i will help you
- and this mod is refer from this link Link Thread and give thanks to for @idid idamrep to make it for all cyanogenmod devices and i'm want to make it simple here without any worry from false modification and any hard from installation progress
- This mod is almost same like lolistat in xposed modules, but not all apps can be tinted at the same time. some apps still not set for that. if you want advance you can try lollistat
- NEW INFORMATION FOR BUILD 20151014 AND UP
this is requirement for installation new build ( only for who want need installation log from aroma installer)
- you must using latest twrp recovery v 2.8.7.0
- if you're using theme materialsed you need to set using custom lockscreen ui in paint icon
- if not try to set using custom lockscreen in twrp option menu
Done
- NEW INFORMATION FOR AOSP 6.0 MRA58V AND UP
- Installation Progress move to TWRP recovery again, check out first post for more information
BUGS :
- This will make some app animation lag when you press menu icon is app or three dot icon. i'm still investigate about this problem
while flashing the archidroid zip file it shows the message as bad zip file
iron man 2 said:
while flashing the archidroid zip file it shows the message as bad zip file
Click to expand...
Click to collapse
sorry for this zip. for archidroid is still old zip file that not include flashable script file. ok i will try to make it new and reupload it again
okay, i upload it recently for ArchiDroid v3.1.1 with flashable zip.
here you are https://www.androidfilehost.com/?fid=24052804347805874
Thanks bro
---------- Post added at 05:39 PM ---------- Previous post was at 05:39 PM ----------
Working fine
iron man 2 said:
Thanks bro
---------- Post added at 05:39 PM ---------- Previous post was at 05:39 PM ----------
Working fine
Click to expand...
Click to collapse
You're welcome my friend, and thanks for your suggest too [emoji1]
Sent from my C1905 using Tapatalk
This feature was there in initial release of Xenon HD rom, Dev had removed it from later builds.
Now on Cm 12.1 its working fine with this mod ... I will update to build 02-09 today and give you framework-res.apk from it.
Thank you very much. Good job. keep it up .
rahulbarai said:
This feature was there in initial release of Xenon HD rom, Dev had removed it from later builds.
Now on Cm 12.1 its working fine. I will update to build 02-09 today and give you framework-res.apk from it.
Thank you very much. Good job. keep it up .
Click to expand...
Click to collapse
Okay, your welcome. I will waiting it .
Sent from my C1905 using Tapatalk
NEW Build is up for CM 12.1 Build 20150902
NEW Build is up for CM 12.1 Build 20150902
and ready for download :laugh:
Nicklas Van Dam said:
Okay, your welcome. I will waiting it .
Sent from my C1905 using Tapatalk
Click to expand...
Click to collapse
Here you go.....
rahulbarai said:
Here you go.....
Click to expand...
Click to collapse
done downloading, now working
thanks for your appreciate sir
okay, done. here you go sir
https://www.androidfilehost.com/?fid=24052804347807415
tell me if you have a problem
Nicklas Van Dam said:
done downloading, now working
thanks for your appreciate sir
okay, done. here you go sir
https://www.androidfilehost.com/?fid=24052804347807415
tell me if you have a problem
Click to expand...
Click to collapse
You did it once again.. Many many thanks .. It is working superfine..
rahulbarai said:
You did it once again.. Many many thanks .. It is working superfine..
Click to expand...
Click to collapse
Your welcome sir
Sent from my C1905 using Tapatalk
Nicklas Van Dam said:
Your welcome sir
Sent from my C1905 using Tapatalk
Click to expand...
Click to collapse
My pleasure bro ...
NEW Build is up for CM 12.1 Build 20150911
NEW Build is up for CM 12.1 Build 20150911
Have try all
NEW update is moved to Nightly update folder
New Build is ready for another custom ROM
New Build is ready for another custom ROM
- Archidroid v3.1.3
- Stryflex LP v1.0
- Enfriar Z5 [NEW]
all is available on download link (androidfilehost)
check on first post. :laugh:
Information
New build for CM 12.1 BUILD 20150913 is available
And more great news !!!
this build is already included with aroma installer
after work hard 3 days, and this is more better than ambient display interface
Have try all :laugh:
Announcement
New version for cm will be released :laugh:
this will add compatibility and add requirement installation
and this will fix not respond after create log installation in aroma menu.
first update will be released for cm 12.1 build 20151014 and if you want have it it too
just give me your framework-res.apk
Build is complete, enjoy for downloading and try
New Build for cm12.1 build 20151019 is released
Can you make this mod for resurrection remix?
Enviado desde mi nicki mediante Tapatalk
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
IN ORDER TO INSTALL THIS ROM YOUR DEVICE MUST HAVE UNLOCKED BOOTLOADER :
ROM AUTHORS:
City Zero - http://www.miui.com/home.php?mod=space&uid=100209901
Midnight Souls (kin912) - http://www.miui.com/home.php?mod=space&uid=176034
FD-Ghost - http://www.miui.com/space-uid-31268862.html
Balcan GSM - http://en.miui.com/space-uid-84584497.html
ROM INFORMATION:
- Rom Base:
Carbon Rom For Sony Xperia S LT26i/LT26ii (Nozomi) - http://forum.xda-developers.com/showthread.php?t=2617846
- MIUI Base(Closed Source):
Compatible CPU Patchrom Base - http://www.miui.com/getrom.php
- ROM Build:
Xiaomi MIUI Patchrom Adaptation - https://github.com/MiCode/patchrom
- Kernel Base:
Sony MSM8x60 Kernel 3.4 For Sony Xperia S LT26i/LT26ii (Nozomi) - https://github.com/abcdjdj/android_kernel_sony_msm8x60/tree/elite-1.7
ROM CREDITS:
Upper Mentioned Rom Authors -
Specially Thanks To Great Dev Midnight Souls (@ kin912)
Xiaomi MIUI Development Team - http://www.miui.com/getrom.php
Making Great MIUI Rom And Developing Patchrom For Adaptation And Porting MIUI To Many Devices
Sony Xperia Base Rom,Rooting Methods & Recoveries Devs
- @ lpws521
- @ wonitor
- @ helinchun
- @ RaymanFX (OpenSemc)
- @ abcdjdj (Kernel Source & Carbon Rom)
- @ deedwar(Kernel Source)
- @ DooMLoRD(Recovery)
!!! THIS ROM IS IN BETA STAGE WITH CONSTANT DEBUGGING AND UPGRADING TO LATEST MIUI RELEASES !!!
- All Files And Tutorials Except Rom Are Collected From Internet & Xda Forums,So All Credits Are Going To Their Authors. -
- I'm Not Responsible For Any Eventual Errors And Misbehaving Of Your Devices. -
- Xiaomi MIUI Is One Of The Greatest And Most Unique Custom Roms For Android Devices.
- MIUI Developement Team Abandoned Stock Based MIUI For Sony Xperia S/SL In MIUI Version V4
- Till Then Our Team Bringing You CM & Stock Based MIUI V5 Port Every Week.
- Our Team Is Group Of Enthusiasts Which Try To Bring Full MIUI V5 Experience On Xperia S/SL.
- Please Remember That Our Work Is Voluntary,And Not An Obligation.
- Now Is Time For Android KitKat 4.4.4 Based MIUI Rom For Our Xperia S/SL.
ROM WORK ONLY FOR UNLOCKED BOOTLOADERS ON XPERIA S/SL DEVICES
IN ORDER TO KEEP THREAD CLEAN PLEASE:
Use Thanks Button If You Are Grateful For Rom Or Advice
For Viewing Screenshots & Bug Feedback Please Use Thread Nav - Bar
[REQUIREMENTS]
[*]Windows/Linux/Mac Powered Computer
[*]Installed Latest Java Runtime Environment Depends Of Your Computer OS - LINK
[*]Unlocked Xperia S/SL Bootloader - LINK
[*]Android Device Drivers Installed
[*]Enabled Settings → Security → Unknown Sources & Settings → Development → Usb Debugging
[*]Phone Battery Charged - 60% At Least.
[STOCK ROM & RECOVERY FLASH PROCEDURE]
[*]Download And Install Latest Flash-Tool Software Depends Of Your Computer OS - LINK
[*]Download And Install Adb & Fastboot - WINDOWS LINK / LINUX & MAC LINK
[*]Download Sony Stock FW 6.2.B.1.96 And Flash It Via Flash-Tool - LINK
- FLASHING RECOVERY -
Download Advance Stock Kernel(FW .96 - CWM Recovery Included) - LINK
Reboot Device Into Fastboot Mode With Command:
Code:
adb reboot bootloader
Flash The Kernel Using Command :
Code:
fastboot flash boot kernel.elf
(Where Kernel.elf (.img) Is The Name Of The File You Downloaded)
[FLASH MIUI ROM]
DOWNLOAD XPERIA S/SL MIUI V5 ROM & OTA UPDATE - Always Latest Version
[QRCODE]http://en.miui.com/download-187.html[/QRCODE]
DOWNLOAD XPERIA S/SL MIUI V5 MULTILANGUAGE ROM (No OTA Support - Repacked Rom ) - Mostly Latest Version
(Flash It Via Recovery And Apply Language Via Set Locale App If You Cant See It In Language List)
[QRCODE]http://xiaomi.eu/community/link-forums/roms.73/[/QRCODE]
1. Put XXX.Zip Copied To The Root Directory Of Cell Phone (That Is A Direct Copy)
2. Enter Recovery (Twrp Or Cwm) (Turn Off, Turn On & Repeatedly Keep Pressing Vol+)
3. Select [Wipe Data / Factory Reset] → [Yes]
4. Select [Wipe Cache Partition] → [Yes ]
5. Select [Advanced] → [Wipe Dalvik Cache] → [ Yes ] → Back
6. Select [Install Zip From Sdcard] → [Choose Zip From Sdcard] → [XXX.Zip] → [Yes]
7. Wait Flash Finished, Press Back And Select Reboot System Now [], The Phone Going To Automatically Restart With Installed Miui Rom.
First Boot Need ~ 3 - 5 Min.
- FLASH GAPPS -
DOWNLOAD 4.4.2 GAPPS
[QRCODE]http://files.miuiandroid.com/gapps/miuiandroid_gapps-4.4-small_20140105_signed.zip[/QRCODE]
1.After First Boot Reboot Your Phone To Recovery Again.
2.Select [Install Zip From Sdcard] → [Choose Zip From Sdcard]→ [Gapps-4.4.x-Small_Signed.Zip] → [Yes]
3. Wait Flash Finished, Press Back And Select Reboot System Now [], The Phone Going To Automatically Restart With Installed Gapps.
4.Set Up Your Google And Xiaomi Accounts(For Themes).
DOWNLOAD WSM TOOLS FOR ADDING VARIOUS OPTIONS FOR MIUI - LINK
CURRENT ROM BUGS:
Carbon Rom / OpenSemc Bugs
FM Radio Dont Working
HDMI Not Working
Ram Memory Display Bug (768MB)
Press On Buttons Will Trigger Double Vibration Instead Once
ROM IS SUITABLE FOR DAILY USE
OFFICIAL MIUI CHANGELOG
XDA:DevDB Information
[ROM][KK 4.4.4][Xperia S/SL] MIUI V5 MULTILANG UB [4.10.10], ROM for the Sony Xperia S
Contributors
BalcanGSM, FD-GHOST, cityzero,kin912,wonitor,lpws521,helinchun
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Sony Stock FW 6.2.B.1.96 + Recovery
Based On: Carbon Rom
Version Information
Status: Beta
Current Beta Version: 4.10.10
Beta Release Date: 2014-10-10
Created 2014-08-20
Last Updated 2014-10-16
Please Test Rom & Post All Bugs & Problems In Order To Solve It ASAP If We Can.
Notice: Multilang Rom Will Be Available From This Weekend Or Somebody Can Build It If Want & I Can Add It To OP.
GPS issue
GPS doesnt seem to work
cant open Caller ID Options process android.phone stopped like in miuiv5 from older thread...
without my number showing to others i cant use this as my daily rom...
mfg
eMd
Thank you guys for still developing MIUI on our device.
I witnessed only a few bugs:
# unable to take screenshots - MIUI shows "Unable to save screenshot. Storage may be in use."
# Calendar app doesn't show Google calendar - in Settings it allows me to sync Google calendar, but it doesn't show up in the Calendar app. Only options are Birthday reminder and Local calendar.
# installed WSM Tools and the Mi-Tools module, bet when opening Mi-Tools it shows that i have an unsupported OS, therefore some things don't work (this problem might related to me disabling some MIUI apps)
The ROM feels and is actually faster than the previous versions than were based on Stock JB 4.1.2 version. Ram management isn't bad at all - still not as good on any other ROM but actually can multitask 2-3 apps at the same time. Battery is also quite good - now the ROM actually goes to deep sleep when you're not using it.
BalcanGSM said:
Please Test Rom & Post All Bugs & Problems In Order To Solve It ASAP If We Can.
Notice: Multilang Rom Will Be Available From This Weekend Or Somebody Can Build It If Want & I Can Add It To OP.
Click to expand...
Click to collapse
For which reason your base rom is omni.
Pure AOSP is better than that.
Sent from my XT1022 using xda premium
Provide some screenies
thank you, gonna try!
1- Home button not working.
2- lockscreen not working.
3- setting button on notification toggle not working.
Sent from my Xperia S using XDA Premium 4 mobile app
nisu4717 said:
For which reason your base rom is omni.
Pure AOSP is better than that.
Sent from my XT1022 using xda premium
Click to expand...
Click to collapse
++++++1111111
Sent from my Xperia S using XDA Free mobile app
UPDATE
OP Updated :
Changed Credits
Changed Bug List
Changed Rom Info
Added Screenshots
Rom Updated :
Rom Completely Rebased Using Carbon KK 4.4.4 Rom
Fixed Memory Display Bug
Fixed Several FC Problems
MIUI V5 Version Updated To 4.8.15
Advice : Do Full Wipe & Flash Complete 4.8.15 Rom
i will test this update....i hope it supports voip calls
Did a clean install with the latest 4.8.15 version - fixed some things, others are now broken.
# Settings button in Notification panel doesn't work (already mentioned)
# Home button doesn't work (already mentioned)
# unable to add Facebook account in Settings
# while charging (USB) phone doesn't lock, sometimes it doesn't even turn off the screen
# missing some features from Settings > Buttons - no option to disable backlight keys
# Google calendar sync now works
Here's a log file which includes Facebook problem and probably some other errors
which gapps should we use for 4.8.15?
kamald73 said:
which gapps should we use for 4.8.15?
Click to expand...
Click to collapse
Link's in the OP.
tradingtoms said:
Did a clean install with the latest 4.8.15 version - fixed some things, others are now broken.
# Settings button in Notification panel doesn't work (already mentioned)
# Home button doesn't work (already mentioned)
# unable to add Facebook account in Settings
# while charging (USB) phone doesn't lock, sometimes it doesn't even turn off the screen
# missing some features from Settings > Buttons - no option to disable backlight keys
# Google calendar sync now works
Here's a log file which includes Facebook problem and probably some other errors
Click to expand...
Click to collapse
Yes, same bugs happened to me. But i think this is because gapps 4.4.2 as link in OP. After flash gapps 4.4.4, setting button in notification panel working, home button working, no problem with facebook
im on miui , but on stock based. i assume that since the update is based on carbon rom , some games might not work , like asphalt?
Sent from my Xperia S
edit:
you can use aospx or pure aosp as base rom , but the ram is low. im on stock but i am using a chinese kernel that is based on doom kernel which has 768 ram.
when install app to need root messege to me the device not root , how to root this rom?
mmshn_love said:
when install app to need root messege to me the device not root , how to root this rom?
Click to expand...
Click to collapse
security , then find root access
Sent from my LT26i
i downloaded and tried it ,,, sorry but:
1-so many lags
2-the touch not comfortable
3- why the rom based on carbon rom that's still at beta , that's kill miui roms for xperia s
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
YOU MUST BE ON THE ASUS STOCK JB 4.2.1 BOOTLOADER VERSION ENDING IN 27.1 or 27.5 AND TWRP 2.7+ OR CWM 6.5.0.0+ BEFORE FLASHING THIS ROM. SEE UPGRADE INSTRUCTIONS BELOW IF YOU ARE UNSURE
You must do a full wipe in recovery if coming from another ROM. Do not do a full wipe from the bootloader. Don't forget to do a Nandroid Backup first and give the ROM 15 mins to stabilise! The first boot will take 15 minutes!
SCREENSHOTS
Features and Tweaks
This ROM is based from OMNI AOSP sources
Supports EXT4 and F2FS Data partitions
Based off omni-5.1.1-20150508-zombi_tf300t-KANG source by lj50036/hardslog
Full Aroma Installer for main rom including choice of 4 kernels and ROM2SD/DATA2SD/F2FS support
Remixed _thatv11 kernel with OMNI ramdisk - repacked by sbdags
Grimlock kernel with OMNI ramdisk and _that init - by hardslog
DPI Size: 160 (TF300 recommended small fonts), 240 (Stock fonts), 224 (Medium fonts) & 200 (Small fonts), 180 (Tiny fonts) & 160 (Specsavers fonts)
Launchers: Omni, Google Experience Launcher, Apex , Nova
Boot Animations: ZOMBi-POP, Android-L, Nexus Phase Beam
Gapps (updated by me to Google latest apks and libs)
Misc Apps: ESFile Explorer, Adobe Flash, AdAway, Titanium Backup, Keyboard Manager
Tweaks: File system and performance optimised, Init.d support, Zip Align, Force GPU Rendering, Browser2RAM
Continued Best Support of any ROM!
Warning - experimental tweaks
[*]Option to enable / disable data journaling on /data during install - CAN CAN CAUSE DATA LOSS IF SUDDEN SHUTDOWN OR CRASH
[*]Option to enable / disable fsync during install - CAN CAN CAUSE DATA LOSS IF SUDDEN SHUTDOWN OR CRASH
[*]Tip 1: Go to Settings - About Tablet, Click build number 7 times
Now you will see Developer Settings & Performance menus
Bug List
[*]No Floating windows yet
Change Log
20150728 ZOMBi-POP RC1 changes
- RELEASE CANDIDATE 1!
- Fixed the problem with ROM2SD and DATA2SD not working correctly on beta 4
- Added SuperUser and Secure Kernel as options to the installer (Turn these off for work wifi or watching sky go, etc)
- Added dock battery icon as an option to the installer under tweaks
- Fixed partitions not getting unmounted correctly for tuning during installation
- Fixed WiFi across the unified bases for TF700/TF300/TF201
- OmniSwitch now working - thanks hardslog
- Tidied up some installer messages
- Google play services updated to unified version for all devices
- Updated Google Maps to version 9.12.0
- Updated Google TTS to version 3.5.6
- Updated Google Calendar to version 5.2.2-98195638
- Updated YouTube to version 10.28.59
- Updated Apex Launcher to version 3.1.0
20150723 ZOMBi-POP Beta 4 changes
- Unified Aroma installer for TF700/TF300/TF201
- Rebased from omni-5.1.1-20150718-zombi_tf300t-KANG maintained by lj50036, hardslog, sbdags
- Merged source from omni-5.1.1-20150718-zombi_tf700t/tf201t-KANG maintained by lj50036, hardslog
- Updated all kernels and modules to the unified versions - thanks lj50036
- Added inverted kernel for TF201 users
- Aroma re-written to allow multi device selection and detection
- Additional tweaks added from TF701 Zombi-pop
- Amended SuperSU installer script to give correct permissions and install locations
- Reverted to latest Banks Gapps - means another wipe - sorry!
- Updated Google Calendar, Google Mail, Google Hangouts, YouTube, Google Search & Google Maps to latest versions
- Updated ESFile Explorer and Nova Launcher to latest versions
- Added flashable zip to enable dock battery - NOTE - this means you can't change the battery icon
20150119 ZOMBi-POP Beta 3 changes
- Rebased from omni-5.1.1-20150508-zombi_tf300t-KANG maintained by lj50036, hardslog
- Repacked Grimlock kernel for 5.1.1 (Grimlock lite is still using 5.0)
- Retweaked some File System and Virtual Memory parameters - focus on smoothness and battery
- Added Aroma code to remember previous selections as well as offer various installs
- sbdags best auto install, omni default auto install, previous options and previous auto install
- Viper4Android sound enhancer updated to lollipop version + updated the audio_effect.conf file
- Updated Google Play Store to version 5.5.8
- Updated Google Play Services to version 7.3.29
- Updated Google Search to version 4.5.13.19
- Updated Google Maps to version 9.8.1
- Updated Google Hangouts to version 3.2.91698097
- Updated Google Play Music to version 5.9.1854R
- Updated Google Calendar to version 5.2-91668080
- Updated ESFileExplorer to version 3.2.5.1
- Fixed swipe gestures on google keyboard
- Fix for Battery Drain on Google Play Services
- Removed Titanium Backup from the zip file
20150422 ZOMBi-POP 5.1 Beta 2 changes
- Rebased from omni-5.1.1-20150422-zombi_tf300t-KANG maintained by lj50036, hardslog
- New base is from OMNI 5.1.1 merged by lj50036
- Browser History is back again! Thanks lj50036 or Hardslog
- You can now choose to install, no GAPPS or minimal GAPPS (just playstore and syncs)
- Updated Google Maps to version 9.7.1
- Updated Google Search to version 4.4.11.16
- Updated Google Mail to verison 5.1.90765967
- Updated Google Calendar to version 5.2-90091543
- Updated Google Hangouts to version 3.1.89134953
- Updated Google Text-to-Speech to version 3.4.6.1819666
- Updated YouTube to version 10.14.56
- Updated ESFileExplorer to version 3.2.5
- Updated Android Terminal to version 1.0.70
- Updated Banks Gapps:
- Google Play Services 7.3.28 (1863718-438)
- Google Play Store 5.4.12
- fixed OC on Some TF201's running Grimlock-lite
20150330 ZOMBi-POP 5.1 Beta 1 changes
- Rebased from omni-5.1-20150330-zombi_tf300t-KANG maintained by lj50036 & harslog
- Adaptive brigtness fixed and values changed
- Browser speed tweaks incorporated into source
- OmniSwitch updates
- Settings changes to alarms and notification interruptions
- Updated Google Music to version 5.8.1836R
- Removed Titanium Launcher - as it needs to be installed form the store now
- Testing Aroma 3.00 scripts from Amarullz
- Repacked omni / _that kernel with preinit init binary
- Updated YouTube, Hangouts, Google Search, Calendar, Maps to latest 5.1 versions
- Updated Google Play Store and Services to 5.1 versions
- Updated Apex Launcher to version 3.0.3
- Recompiled Browser.apk with speed tweaks
- Moved tibu to system to try and fix install issues
- Shrunk all gapps by removing duplicate lib files from binaries
- Cleaned up gapps inconsistencies (sbdags)
20150218 ZOMBi-POP Beta 4 changes
- Rebased from omni-5.0.2-2015-02-19-zombi_tf300t-KANG source maintained by lj50036
- Show Optimizing app dialog on first boot
- Prevent copyNativeLib of package scanning to reduce booting time
- Keyguard: don't refresh ui when screen off which causes high power when screen off
- Prevent App Not Responding when broadcast receiver is killed
- lowmemorykiller: Fix high min-free values
- Removed my minfree init.d script to test new default values
- Changed the interactive governor tweaks to help battery life and heat
- min_sample_time from 40000 to 10000
- go_maxspeed_load from 90 to 98
- max_normal_freq from 1500000 to 1300000
- midrange_freq from 760000 to 1150000
- Updated SuperSU to version 2.46
- Updated Apex Launcher to 3.0.2
- Updated Google Maps to version 9.4.0
- Updated YouTube to version 10.05.6
20150212 ZOMBi-POP Beta 3 changes
- Rebased from omni-5.0.2-2015-02-11-zombi_tf300t-KANG source maintained by lj50036
- Updated Grimlock Kernels for exfat and ntfs support (hopefully!)
- New Kernel - Grimlock LITE - OC reduced to 1700mhz and voltage reduced for better battery/heat
- Rebuilt _that/omni kernel with oom patches and repacked ramdisk
- Reverted some vm and kernel tweaks which seems to have got performance back on track
- Reverted read_ahead_kb to 4096 as no benefit to 2048
- Fixed Tibu not installing correctly and updated to version 7.0.0.2
- Removed Chrome and Dolphin / Flash
- Rebuilt all GAPPS from latest PA GAPPS modular package Feb 2015
- Resized Nexus-Lollipop bootanimation
- Added the Unknown Pleasures bootanimation
- Aroma theme updated - thanks Shonkin for the bg picture
- Fixed Overclocking not working on data2sd with _that's kernel. You now get 4x1800 cores on data2sd
- CPU will use all 4 cores at 90% max load instead of 85% on basic cpu tweaks
- Fixed missing sdcardi on grimlock kernel
- Fixed init.d on Grimlock 5 kernel by repacking init.zombi.rc
- Fixed zipalign script so it runs properly once after a dirty or clean install
- Set the lowmemorykiller to less aggressive 2048,4096,8192,16384,24576,32768 via init.d script
- Rewrote Aroma installer which gets us a step closer to it remembering previous installs (but not yet!)
- Split out the extra tweaks into two parts for further debugging - Basic and Extended
- Spilt out Disable Software Rendering and Force GPU rendering for further testing
- Reordered init.d scripts to make more sense
- Updated Titanium Backup to version 7.0.0 and cleaned up installation script
- Force GPU Rendering is not getting applied correctly - do it manually for now
20150127 ZOMBi-POP Beta 2 changes
- Rebased from omni-5.0.2-20150127-zombi_tf300t-KANG source maintained by lj50036/hardslog
- Fixed Auto-rotation - thanks hardslog/lj50036!
- NEW Material AOSP Broswer - very nice!
- Omni Switch but no windows mode yet
- Fixed missing sdcardi folder for data2sd and rom2sd users
- Fixed the Apex and Nova Launchers getting missed up on install
- CLEANTweaks init.d re-balanced to be less aggressive - hopefully stops so many reboots
- Recompiled latest framework-res.apk with zombi-pop default_wallpaper.jpg
- Updated Google Chrome to version 40.0.2214.89
- Updated Google Maps to version 9.3.0
- Updated YouTube to version 10.02.3
- Updated Android Terminal Emulator to version 1.0.64
20150121 ZOMBi-POP Beta 1 changes
- Fixed Auto-rotation
- Added Linaro build of Grimlock Kernel (needs more testing)
- AOSP Browser: Materialize (green)
- First Release for TF300/TF201
20150119 ZOMBi-POP Pre-Release 3 changes
- New name - new logo! ZOMBi-POP
- Rethemed Aroma to new ZOMBi-POP theme
- Added 2 optional beta tweaks for testing (screen and kernel)
- Fixed _thatv11 kernel option
- Added Grimlock v5.0 (not tested)
20150118 Lollipop Pre-Release 2 changes
- Updated to latest OMNI Lollipop source omni-5.0.2-20150117-zombi_tf700t-KANG maintained by lj50036
- Fixed issue with AOSP Browser getting installed when not selected
- Fixed issue with Live Wallpapers getting installed when not selected
- Fixed issue with Launcher3 getting installed when not selected
- Fixed issue with Terminal not getting installed when selected
- Fixed issue with DSPManager still getting installed when Viper4fx is installed
- Removed stock calendar as google app one is far superior
- Fixed init.d scripts not running due to wrong permissions and wrong ramdisk init.rc call
20150117 Lollipop Pre-Release 1 changes
- Updated system and data apps to use new lollipop structures
- Updated all apps to latest versions
- Removed xposed as not compaitble with lollipop
- Tweaked the force gpu options
20150111 Lollipop Alpha 1 changes
- Updated to latest OMNI Lollipop source maintained by lj50036
- New PA GApps Lollipop version 2015
- Initial Beta test build to see what works and what doesn't
Click to expand...
Click to collapse
The Team
@sbdags - Creative Mastermind (From CROMi-X/CROMBi-kk/ZOMBi-X ROMS)
@lj50036 - Source Guy (From CROMBi-kk/ZOMBI-X ROMS)
@hardslog - The Canadian (From Grimlock ROMS)
@ikkeT- The Fin
Credits
Google
Omni Team - Thanks!
@_that For all the great advice, watching over us and fixing everything we break!!!!!
All the beta testers for your patience and feedback : fatboyinlycra, berndblb, drewski_1, duckredbeard, keshavmot2, corb06, jmaybush, JoJoDaClown, kansasboy001, TrofeoSC
To Do
Fix loads of stuff!
XDA:DevDB Information
ZOMBi-POP, ROM for the Asus Transformer TF300T
Contributors
hardslog, lj50036, sbdags, _that
Source Code: https://github.com/zombi-x
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.1.x
ROM Firmware Required: JB Ending with 27.1 or 27.5 bootloader
Based On: OMNI AOSP
Version Information
Status: Stable
Current Stable Version: 20150728 RC1
Stable Release Date: 2015-07-28
Current Beta Version: 20150723 Beta 4
Beta Release Date: 2015-07-23
Created 2015-01-24
Last Updated 2015-07-27
Reserved
UPGRADE INSTRUCTIONS
Steps
1. If you haven’t yet, unlock your TF300 by following these instructions.
2. Install the latest version of Team Win Recovery Project (TWRP) 2.7+ Note this ROM will NOT install with older versions of recovery!
TWRP OFFICIAL DOWNLOADS
Download the recovery file from above, put it into the same folder where you have adb and fastboot files. Please rename it to twrp.blob or cwm.img and follow the instructions below:
CWM:
Connect your transformer to your PC, reboot to the bootloader to enable fastboot by either holding down [power] and [volume down] or opening a command prompt in your adb.exe folder in windows:
Code:
adb reboot bootloader
To flash the recovery:
Code:
fastboot -i 0x0B05 flash recovery cwm.img
or
Code:
fastboot -i 0x0B05 flash recovery twrp.blob
A blue bar will go accross the screen on the tab and the command prompt will indicate it was successful in about 10 seconds
Then reboot the tablet either back to the bootloader or to android to complete
Code:
fastboot -i 0x0B05 reboot-bootloader
fastboot -i 0x0B05 reboot
You can now access the recovery by pushing [volume up] on the RCK icon in the bootloader screen
Click to expand...
Click to collapse
FLASHING THE ROM FROM RECOVERY
Steps
1. Download the ROM below and save to your internal or external SD Card. Do not unzip the file.
ZOMBi-POP ROM DOWNLOAD
Note: The first boot after install will take 15 mins whilst everything is built. Some people might think it is looping but it is not. The ROM also takes about 15 mins to stabilise after the first boot
ZOMBi-POP RC1 LP 5.1.1 Full Mirror 1
ZOMBi-POP RC1 LP 5.1.1 Full Mirror 2
MD5 sum: e3980e1bffa539e676ac1269268abcd1
Flash this patch please as there is a file missing that gives better performance
RC1 Performance Patch
Remember if you are on rom2sd you beed to flash rom2sd1.zip first and if on data2sd use data2sd1.zip first.
FILES ARE SIGNED. IF YOU ENABLE SIGNATURE VERIFICATION IN RECOVERY IT WILL VALIDATE THE FILE BEFORE FLASHING.
ROM2SD/DATA2SD USERS PLEASE READ!
ROM2SD only works if you have ZOMBI-POP, ZOMBi-X, CROMBi-kk, CROMi-X or miniC flashed on internal with a THATv10+ kernel. Just choose ROM2SD in the installer of ZOMBi-POP to flash it to ROM2SD and the installer will do the rest.
- Install ZOMBi-POP and choose ROM2SD or DATA2SD install
The ROM2SD1.zip below is only needed if you need to switch your recovery to between normal and rom2sd mode. For Example you want to backup or restore a rom2sd installation. Flash once to go rom2sd and flash again to go back to normal. A reboot always puts you back to normal. Thanks to _that!
ROM2SD1.zip Download Mirror 1
ROM2SD1.zip Download Mirror 2
MD5 Sum: 7b699136d59ea3d5538570ccaf422acf
The DATA2SD1.zip below is only needed if you need to switch your recovery to between normal and data2sd mode. For Example you want to backup or restore a data2sd installation. Flash once to go data2sd and flash again to go back to normal. A reboot always puts you back to normal.
DATA2SD1.zip Download Mirror 1
DATA2SD1.zip Download Mirror 2
MD5 Sum: 9d5e9e2fd32593f981624499b37924b2
2. Boot to recovery – Either choose Boot to Recovery from the Power Menu if available on your current ROM or from the tablet power off hold the [volume down] button and press the [power] button. Once your see the flashing RCK icon, press [volume up] to select. If another icon is flashing use [volume down] to move between icons.
3. Using your recovery make a Nandroid Backup of your current setup
4. Select install and navigate to where you saved your ROM zip file.
5. Choose the ZOMBi-POP zip file and follow the on screen prompts to customize your installation.
6. Reboot and enjoy.
Using GParted to setup a micro SD for ROM2SD or DATA2SD!
First and foremost - DO NOT USE MINI TOOL!
Formatting a micro sd card for ROM2SD
Note for DATA2SD just do one partition in stead of 2
We will be using a GParted Live boot USB and a FAST good quality micro sd like a Sandisk or Samsung Class 10 - SDHC/SDXC UHS-1 card with read speed of at least 20MB/S. If you have a cheap chinese eBay card don't bother - they are not good enough.
You will also need a USB Stick with at least 1GB size. Note this process formats the USB disk so don't keep any important files on it. It will also wipe your micro sd so make sure you are prepared.
1. Go to the link below and download the GParted Live CD/USB/HD/PXE Bootable Image and save it somewhere you remember
http://gparted.sourceforge.net/download.php
2. Download Linux Live USB Creator and install it
http://www.linuxliveusb.com/
3. Fire up LiLi USB Creator:
a. Choose your USB key - I,e, the drive letter for your USB (not sd card)
b. Choose your GParted iso image for the source
c. Choose the check box to Format Key in FAT32 and hide files
d. Click the lightning bolt to create
4. Now you have a bootable disk you need to boot from it. You may need to alter you BIOS Settings on your PC to boot from a USB Stick but mine did it without messing.
5. Insert your micro SD card into an SD Card adapter and insert into PC
6. Boot into GParted
7. Choose Gparted Live <Enter>
8. Don’t touch keymap <Enter>
9. Languge <Enter>
10. Start Gparted Automatically
11. Change device to your micro sd )it will default to you hard disk - hda– mine is /dev/sdc
12. Delete all existing partitions
For a 64GB card: (resize as needed but /system doesn't need to be bigger than 1GB)
13. Create new, always select primary: do this 3 times.
14. FAT 32 : Size 16GB – this will be /dev/sdc1 in gparted and will be your sdcard for storage in Android
15. EXT4 : Size 42GB – this will be /dev/sdc2 in gparted and will be your /data partition in Android
16. EXT4 : Size 1GB – this will be /dev/sdc3 in gparted and will be your /system partition in Android (not needed for data2sd)
Apply, wait until it finishes and then reboot. Remember to remove the usb stick
*Images stolen from elsewhere as I couldn’t get it to save mine
Now you are ready to install ROM2SD. Note if you want to use DATA2SD then only do 2 partitions 1x FAT32 and 1x larger EXT4
Then reinstall ZOMBi-POP but this time choose the ROM2SD / DATA2SD option
Reserved
All,
The ROM is still in BETA and by flashing it you are helping the BETA Testing process
It may still have some bugs, spontaneously reboot, drain the battery faster or heat up a bit. The aim is to make it better and fix them.
If you find a bug and want to report it here please post a logcat (after it occurred) with a description of what you were doing at the time and the rough timing in the logcat to look at (these things get huge!).
You can also post a dmesg which is the kernel boot logs and can indicate issues with data corruption or hardware.
If you get a reboot then please post a last_kmsg from the /proc folder.
How to get a logcat
How to get useful logs
Thank you!!
Join us on IRC for a chat or if you have questions:
Freenode
zombi-x
There is no Q&A section for this rom as it is still in dev so you are ok to post your questions here!
One for me
MIRROR 1 & 2 are up for your flashing needs ..... :good:
Thx Josh & Team ZOMBI
Cannae reserve a post but this one will do
@lj50036
I know all the kinks haven't been worked out yet, but is dock battery icon in this version?
toolhas4degrees said:
@lj50036
I know all the kinks haven't been worked out yet, but is dock battery icon in this version?
Click to expand...
Click to collapse
No not yet, most of the dock keys are working, but no battery support as of yet....
Thx Josh
Could it be possible to enjoy this project with the transformer prime???
Thx un any case, great effort, great success team!
jacmat said:
Could it be possible to enjoy this project with the transformer prime???
Thx un any case, great effort, great success team!
Click to expand...
Click to collapse
I am testing it now and have had good results....
Just need a bit more testing and then I will make a thread for the 201 ...... :good:
Thx Josh
lj50036 said:
I am testing it now and have had good results....
Just need a bit more testing and then I will make a thread for the 201 ...... :good:
Click to expand...
Click to collapse
so good to hear that, thanks so much for your work Josh!
Good to know! It would be great if it could work on the ME301T also! Is the hardware that different?
Hi, this rom work on TF300TG ???
Thanks
lj50036 said:
I am testing it now and have had good results....
Just need a bit more testing and then I will make a thread for the 201 ...... :good:
Thx Josh
Click to expand...
Click to collapse
Thanks! Flashed with grimlock 5.0 and it runs well, but I had issues with chrome browser lockups...
lj50036 said:
I am testing it now and have had good results....
Just need a bit more testing and then I will make a thread for the 201 ...... :good:
Thx Josh
Click to expand...
Click to collapse
Thank you very much, Josh, you and your team bring to prime's owners a reason to smile
jlamaeli said:
so good to hear that, thanks so much for your work Josh!
Click to expand...
Click to collapse
You will see a thread when its ready... :good:
EV0LU710N said:
Good to know! It would be great if it could work on the ME301T also! Is the hardware that different?
Click to expand...
Click to collapse
There maybe a compatible pack but we will have to wait and see... :good:
medievalspawn said:
Hi, this rom work on TF300TG ???
Thanks
Click to expand...
Click to collapse
It should but you will lose 3G....
luismiguel1977 said:
Thanks! Flashed with grimlock 5.0 and it runs well, but I had issues with chrome browser lockups...
Click to expand...
Click to collapse
Logcat after the browser crashes .....
jacmat said:
Thank you very much, Josh, you and your team bring to prime's owners a reason to smile
Click to expand...
Click to collapse
Will have to wait and see.... :good:
Thx Josh
lj50036 said:
There maybe a compatible pack but we will have to wait and see... :good:
Click to expand...
Click to collapse
That would be fantastic, surely would make a bunch of people very happy, myself included!
By the way, if you need a beta tester or some help with the development, I would be very happy to help out! I have a tablet ready to test drive!
lj50036 said:
There maybe a compatible pack but we will have to wait and see... :good:
Click to expand...
Click to collapse
Thank you man, would be great! :good:
excellent, downloading now, can you recomend a good gapps package for the rom
thanks
matt_simpson said:
excellent, downloading now, can you recomend a good gapps package for the rom
thanks
Click to expand...
Click to collapse
It's built in as choices.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Android Open Source Project with OMS/Layers
Disclaimer:-
Code:
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,thermonuclear war, or you getting fired because the alarm app failed!!
* Please make nandroid backup before flashing this as a precaution!
* Try this ROM at your own risk!
Smoothness of Stock ROM with greatness of OMS Themes!
What is AOSP?
AOSP is Android as Google publishes without other modifications. More or less AOSP is the Nexus devices stock rom without gapps.
Anyway, to get a working system I added some changes from CodeAurora Forum and CyanogenMod. I also added Non-AOSP features for a better user experience ("Clear All" button in Recents) and I'm NOT going to add something other.
What is OMS?
OMS stands for Overlay Manager Service and was developed by Sony, just like RRO - so overlays could be downloaded and managed through a client.
More about OMS and Substratum
Developers:-
@srisurya95
@akhilnarang
Features:-
Based On Google's AOSP
Clear all recents
AOSPA Battery Styles
Quick Unlock
Volume Rocker Wake
Advanced reboot
Hardware Key customization
Optimizations for battery
How to flash:-
Download Latest AOSP Marshmallow Build
Download Gapps
Take Nandroid Backup via Recovery
Recommended- Full wipe and Factory reset
Format System, Data, Cache, Dalvik-cache and Clean Install the ROM
Flash ROM using recovery
For Xperia M Dual, flash THIS patch
Flash Gapps
Reboot
Enjoy!
NOTE- To access FOTA recovery(CWM/TWRP) after flashing AOSP, press vol+ on reboot.
Downloads:-
Download AOSP-OMS Marshmallow [2016-10-31]
Download MD5 Checksum
Old Versions:-
Download AOSP-OMS Marshmallow [2016-08-13]
Download MD5 Checksum
Download AOSP-RRO Marshmallow [2016-05-14]
Download MD5 Checksum
Bugs:-
None!!
Credits:-
Big thanks to @PecanCM
Thanks to @Alberto97 (for his works on F-AOSP lollipop)
CyanogenMod Team
SlimROM Community
AOSPB
XDA:DevDB Information
Android Open Source Project [AOSP+RRO], ROM for the Sony Xperia M
Contributors
STRYDER~007
ROM OS Version: 6.0.x Marshmallow
Source Code Rom:https://github.com/AOSP-RRO
Source Code Kernel:https://github.com/CyanogenMod/android_kernel_sony_msm8x27/tree/cm-13.0
Source Code Device:https://github.com/STRYDER-007/aosp_device_sony_nicki
Version Information
Status: Stable
Created 2016-05-15
Last Updated 2016-10-31
Screenshots and Changelogs
Changelogs:-
Code:
====================
31-10-2016
====================
- Merged Android-6.0.1_r72
- October 5th security patch merged
- Added livewallpaper picker
- Added caf material music player and audio fx
- Nuked busy box and added toybox
- Fixed bash
- New default wallpaper
- Updated sepolicy
- Added many APNs
- Updated and included new OMS commits
====================
13-08-2016
====================
- Android-6.0.1_r61 merged
- Updated security patch to August
- Added AOSPA battery styles which includes portrait, circle, percentage only modes (Accessible through Settings->Battery)
- New Theme system called OMS is now merged. Layers manager is deprecated and Substratum is added.
- Added option to select MTP or charging or photo transfer by default when usb is connected (accessible through Settings->Storage & USB)
- Fix Low recording volume
- New material Camera icon
- New material SIM toolkit icon
- Removed Email app to reduce zip size
- New Adreno sensor blobs
- Fix network search
- Hotplug updates in kernel for performance improvements
- Upstream AOSP changes
====================
14-05-2016
====================
- Updated base to 6.0.1_r43
- Security patches updated to May Release
- Fixed SuperSU flashing
- Initial Marshmallow Release
Screenshots:-
Great work man! just waiting for downloading links will test it Cheers!!
Edit = Downloading
good work sir .
my regards
Thanks STRYDER will u please look into development of miui... You will be loved even more thanks for keeping nicki alive
It is really smooth. Thanks!
Adarsh Dubey said:
Thanks STRYDER will u please look into development of miui... You will be loved even more thanks for keeping nicki alive
Click to expand...
Click to collapse
Sorry friend, I abandoned MIUI. My next project for XM will be StryFlex Marshmallow.
Thanks stryflex with xperia x lockscreen
STRYDER~007 said:
Sorry friend, I abandoned MIUI. My next project for XM will be StryFlex Marshmallow.
Click to expand...
Click to collapse
Ok thanks n thanks for the info
Hi, thanks for new rom... have your rom related commits from pencanCM source code nicki? Like Zram, enabled digital back mic?
AdrianDR94 said:
Hi, thanks for new rom... have your rom related commits from pencanCM source code nicki? Like Zram, enabled digital back mic?
Click to expand...
Click to collapse
Yep..All is included.
https://github.com/STRYDER-007/aosp_device_sony_nicki/commits/mm-6.0
Thanks to port another AOSP ROM sir
Thanks to port another AOSP ROM sir , and let me try this too :laugh:.
NOTE- To access FOTA recovery(CWM/TWRP) after flashing AOSP, press vol+ on reboot.
with vol down i wont be able to boot to FOTA recovery? my vol+ is broken
poran123 said:
NOTE- To access FOTA recovery(CWM/TWRP) after flashing AOSP, press vol+ on reboot.
with vol down i wont be able to boot to FOTA recovery? my vol+ is broken
Click to expand...
Click to collapse
you still can access recovery mode using terminal command . try to install terminal emulator app and use this command.
su (enter)
reboot recovery (enter)
and that same too if you want to use adb command, just add adb shell at first command and follow another lines to complete it
Nicklas Van Dam said:
you still can access recovery mode using terminal command . try to install terminal emulator app and use this command.
su (enter)
reboot recovery (enter)
and that same too if you want to use adb command, just add adb shell at first command and follow another lines to complete it
Click to expand...
Click to collapse
ok thanks...
Awesome rom.. Very smooth.
Thanks
Support XMD?
Nicklas Van Dam said:
Thanks to port another AOSP ROM sir , and let me try this too :laugh:.
Click to expand...
Click to collapse
poran123 said:
Awesome rom.. Very smooth.
Thanks
Click to expand...
Click to collapse
Glad you enjoy my work!
Miladj said:
Support XMD?
Click to expand...
Click to collapse
Why don't you try it and let us know? No one reported yet if it works on XMD or not.
Miladj said:
Support XMD?
Click to expand...
Click to collapse
yup it does using it on my xperia m dual
make sure you have dual sim support on other cm13 roms
just after flashing the rom flash this
http://www.mediafire.com/download/qbpodyn46cx6h7m/aosp-beta5-M-dual-patch.zip
it would work
Sometimes , the date and time are not according to the time zone appears one more time and date is in 1970
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[highlight]Disclamer:[/highlight]
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please make sure you read and understand everything written in the post before flashing it! YOU are choosing to make these modifications and must be sure of what it does.
Introduction
This is a project in which I keep the stock settings and try to optimize resources to better use the phone. The majority of applications and features of LG have been removed to relieve the load of the system. I will try to expand support for this variants, add compatible mods, and anyone who wants to contribute to the development of this project is welcome.
Screenshots V1
Screenshots V2
Screenshots V3
Features
Code:
[highlight]- Stock Rom D851[/highlight]
- Fluidity
- Stock
- Fast
- Stable
- Bumped
- Smoth
- Deodexed
- Most LG applications have been removed.
Installation instructions
Code:
- The phone must be charged to 100% (Recommended).
- Enter the recovery and wipe Cache, Davilk Cache, System, Data, Internal Storage (optional),
- Press the button "install" and choose the rom file.
- Reboot and enjoy.
Changelog
Code:
[highlight]Nimax Slim Fit 3.0 (December 29, 2016):[/highlight]
[INDENT]
- Added Full Ux5 on Rom.
- Fixed incompatibility of LG Alarm app(G5) with Ux5 on d85130E firmware.
- Deleted Xposed.
- Accelerated the boot up of Rom.
- Added Qualcomm Adreno Drivers.
- Updated Xceed Kernel to latest version (bld8f).
- Added Full tinted navbar on UX5.
- Added AutoStart in Settings on Ux5.
- Added 6 Toggles.
- Added ViPER4Android 2.4.0.1
- Rounded windows for Ux5.
- Rounded notifications for Ux5.
- Added Nimax logo in LgSettings.
- Improved performance and battery for Ux5.
- Updated system libraries.
- Restructuring the code to improve Ux5 performance.
- Updated files and libraries in system from the D85530O firmware(latest version) to improve compatibility.
- Updated SuperSu to latest stable version.
- 0.25x animations added in developer options.
- V10 camera and improved quality.
- Added Miniview.
- Updated G5 apps from your last base.
- Added option to call recorder for Ux5.
- Updated Gboard - the new Google Keyboard 6.0.69.142176780-armeabi-v7a.
- Fixed problems with the audio of the calls.
- Improvements in audio when using bluetooth.
- Updated the kernel with minor changes on the stock version.
- Add Navibar to 38 dpi on Ux5.
- Fixed font bug on Ux5.
- Added full support with google tts.
- Improvement of gps.
- Fixed Volte support on Ux5.
- Fixed Clipboard on Ux5.
- Everything included in the previous version.
[/INDENT]
[highlight]Nimax Slim Fit 2.0 (December 14, 2016):[/highlight]
[INDENT]
- Update Xposed Framework to v87 Thanks to @rovo89
- Added Official Magisk v9 - The Universal Systemless Interface [Android 5.0+] [2016.11.15] Thanks to @topjohnwu
- Added support for Official Stock Xposed Framework and Unofficial Systemless Xposed Framework (is required Supersu systemless and magisk) Thanks to @topjohnwu
- Added Material Design Xposed Installer [26/11/2016] [UNOFFICIAL] Thanks to DVDandroid
- Added latest Magisk Manager
- Added 3Minit Battery Mod Thanks to @gharrington
- Updated Busybox and Busybox Systmeless to 1.25.1
- Added performance script.
- Added battery performance script.
- Update SuperSu Systmeless 2.78 SR5 Thanks @Chainfire
- Minimal modifications on kernel stock to improve autonomy.
- Added Thermal Mod Thanks to @Robshr
- Add Es File Explorer in latest version
- Update Arise Thanks to @ A.R.I.S.E. Sound Systems
- Added Gabriel Kernel in latest version (December v2.2) @mostafaz.
- Fixed Build.prop
- Add the option to remove applications from Aroma.
- Update sound from latest LG G5
- Add the option to remove applications from Aroma.
- Rounded windows.
- Rounded notifications
- Updated Adaway to latest version with Systemless support Thanks to @mrRobinson
- Fixed Assertive Display
- Updated LG Apps.
- Fixed minor bugs
- Added option to select stock launcher
- Added Boot Animation Thanks to @frantisek.nesveda
- Includes all changes from previous versions.
[/INDENT]
[highlight]Nimax Slim Fit 1.0 (November 19, 2016):[/highlight]
[INDENT]
- Security Patch July
- Full deodex.
- Add Aroma Installer.
- Based on the latest stock firmware D85130E
- Added animations to 0.25 in developer option
- Added Gabriel Kernel in latest version (November) @mostafaz.
- Add F2FS support partition (System, cache, data) on ROM. You should to use a compatible kernel (Gabriel)
- Add Solid Kernel in latest version (October)@Loller79.
- Updated Telegram to latest version
- Add AutoStart Mod in Settings thank for your guide to @DaRk-L0rD
- Add Es File Explorer in latest version
- Fixed Call Recorder
- Updated and fixed Arise to the latest version thanks to @A.R.I.S.E. Sound Systems.
- Updated SuperSu to latest version (SuperSu 2.78 SR4 Systemless or stock root)
- Update Xceed Kernel to latest version bld7n (November) patched for New Qualcomm Drivers thanks to @kairi_zeroblade
- Viper V4A 2.5.0.5 thanks to @zhuhang.
- Fixed Bluetooth not working on D851.
- Added option to select the DPI value of the Rom.
- Updated busybox in latest stable version.
- Add Oversharpening Fix in aroma.
- UX4 or UX5 stock launcher.
- Add Global APN (optional).
- Add Navibar 38
- Add Init.d Support (optional)
- Update stock kernel to the latest version thanks to @aclegg2011 and @Autoprime for your boot repack
- Add google tts
- Add Volte support
- Add Abserttive display (optional)
- Improved management of ram and multi-tasking</*>
- Improvements in the quality of the V10 camera with custom icon</*>
- Best response touch
- SELinux permissive
- Improvement of audio libraries
- Improved sound quality
- Updated LGHome and LGHome_Theme_Optimus from latest lg g5
- Added Xposed Framework v86
[/INDENT]
Compatible variants
Code:
- D851
Downloads
Nimax Slim Fit - D851 - Onedrive Server
Nimax Slim Fit - D851 - Mega Server
Nimax Slim Fit - D851 - AndroidFileHost Server
[highlight]Note:[/highlight] For downloading LG applications and themes (for Ux5), please go to posts 2 and 3 for more details (coming soon).
[highlight]Beta-Tester and development group:[/highlight]
If you want to contribute ideas, try the new build (beta-tester), assist in the development and theming of this project, you are welcome to my group. The idea is to generate new alternatives and give a new life to our D851 Variant:
Telegram_Group
Bug/Report
Thanks To/Credits
Code:
- @[url=http://forum.xda-developers.com/member.php?u=5132229][color=orange]Xpirt[/color] for patches, script and files[/url]
- @[url=http://forum.xda-developers.com/member.php?u=7242921][color=orange]Truongthevinh.[/color] for patches and script[/url]
- @[url=http://forum.xda-developers.com/member.php?u=6426194][color=orange]Sergioextre.[/color] Special thanks for his guide and teaching for theming.[/url]
- @[url=http://forum.xda-developers.com/member.php?u=3637908][color=orange]kairi_zeroblade.[/color] for his great work with Xceed Kernel.[/url]
- @[url=http://forum.xda-developers.com/member.php?u=5062938][color=orange]Saratoga79.[/color] for his great work with Nimax Logo.[/url]
- Thanks to my beta-testers:
- @[url=http://forum.xda-developers.com/member.php?u=6017942][color=orange]sheikhramnuj[/color][/url]
- @[url=http://forum.xda-developers.com/member.php?u=5604658][color=orange]FMSL[/color][/url]
- @[url=http://forum.xda-developers.com/member.php?u=6822536][color=orange]Ivannoe[/color][/url]
- @[url=http://forum.xda-developers.com/member.php?u=291234][color=orange]graphreak[/color][/url]
Paypal Donate
Code:
- Developer: [EMAIL][email protected][/EMAIL]
XDA:DevDB Information
Nimax Slim Fit Rom, ROM for the LG G3
Contributors
cesarandres_8911
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Marshmallow
Version Information
Status: Stable
Current Stable Version: 3.0
Stable Release Date: 2016-12-28
Created 2016-11-19
Last Updated 2016-12-29
Nimax Slim Fit Rom gives you the possibility to customize the installation of this Rom. It allows you to remove applications, add mods, modify kernel and additional options to your liking.
Kernel Installation Options
Stock D85130E
Xceed bld7n (November)
Gabriel v2.2 (December)
Solid v2.2 (October)
Sharpening Mod
Sharpening Disabled
Sharpening Set to 25%
Sharpening Set to 50%
Sharpening Set to 75%
Sharpening Stock Value
Select DPI Value
640 Stock from LG.
600
580
560
Remove Apps
Quick Remote
Capture+
Music
Alarm
Gallery
Installation of applications
AdAway
Telegram
XCamLG
ES File Explorer File Manager
TWRP Manager
SystemUI Theme and Stock Launcher
Stock UX4 Launcher.
Stock UX5 Launcher.
Both Stock Launcher.
Customize Features in Rom
Global APN.
Init.d Support.
Magisk v9 - The Universal Systemless Interface.
Assertive Display.
Root System Mode.
Thermal Mod.
3minit battery.
Arise Audio Mod
Xposed Framework v87
Reserved
Awesome! Just installed this rom. Will report back if any issues occur. Thanks op! Keep it up!
Sent from my LG-D851 using XDA-Developers mobile app
Wait for d855. Thanks
Enviado desde mi LG-D855 mediante Tapatalk
ulises55 said:
Wait for d855. Thanks
Enviado desde mi LG-D855 mediante Tapatalk
Click to expand...
Click to collapse
+1
×GNLS×
Love the Rom it seems very smooth and stable.. just 1 issue so far.. I cannot send pictures through the built in messenger. It will just sit there sending and then fail and ask to retry. Reboot and tried several pics and even taking a pic and same. Any fix for this?
Edit: Only happens on Wifi.. switched off to my data and it works.. this isnt going to be good :-/
Erock2k4 said:
Love the Rom it seems very smooth and stable.. just 1 issue so far.. I cannot send pictures through the built in messenger. It will just sit there sending and then fail and ask to retry. Reboot and tried several pics and even taking a pic and same. Any fix for this?
Edit: Only happens on Wifi.. switched off to my data and it works.. this isnt going to be good :-/
Click to expand...
Click to collapse
What kernel you are using?
Sent from my LG-D851 using XDA-Developers mobile app
sheikhramnuj said:
What kernel you are using?
Sent from my LG-D851 using XDA-Developers mobile app
Click to expand...
Click to collapse
I chose stock on install. This was happening to my wifes phone on bone stock 6.0 and went away when we put Fulmics rom on the phones. but I wanted somnething more stable.
Erock2k4 said:
I chose stock on install.
Click to expand...
Click to collapse
Try to uninstall the built in messenger and install it back.
Sent from my LG-D851 using XDA-Developers mobile app
sheikhramnuj said:
Try to uninstall the built in messenger and install it back.
Sent from my LG-D851 using XDA-Developers mobile app
Click to expand...
Click to collapse
No option to do that. There is no Uninstall in the app info. On a side note I see a picture coming in but its just downloading also
Erock2k4 said:
No option to do that. There is no Uninstall in the app info. On a side note I see a picture coming in but its just downloading also
Click to expand...
Click to collapse
Can you post some screenshot on that app?
Sent from my LG-D851 using XDA-Developers mobile app
Thx, wait for d855 :good:
I am currently working to release a new version of the rom with firmware base d85530O. I am currently trying to add support for d850, d851 and d855. The idea is to create for each variant a rom odex and another deodex to choice of tastes. It is currently under test for variant d851 and d855, for the d850 is still under construction.
Heh, I forgot there was a thread for this ROM. Been running it as a secondary after the unbrick(*). Using Gabriel kernel (updated to v2.1 OC) and it just runs great.
Being UX4 I discovered that @Kickoff's old G3 TweaksBox themes for Lollipop work perfectly on it.
Definitely a better user experience than a full UX5 setup.
None of my ROMs, including Nimax, work with 30series modems so I just flash 20e or 20g and I'm good to go.
(*) Thank you so much @cesarandres_8911 for your help and guidance in unbricking my phone.
Haven't used PayPal in a couple of years but if my account is still valid...
Un regalo para ti.
LG G3 D851, Tesla 3.3 Oreo 7.1, Tapatalk 4.9.5
marcdw said:
Heh, I forgot there was a thread for this ROM. Been running it as a secondary after the unbrick(*). Using Gabriel kernel (updated to v2.1 OC) and it just runs great.
Being UX4 I discovered that @Kickoff's old G3 TweaksBox themes for Lollipop work perfectly on it.
Definitely a better user experience than a full UX5 setup.
None of my ROMs, including Nimax, work with 30series modems so I just flash 20e or 20g and I'm good to go.
(*) Thank you so much @cesarandres_8911 for your help and guidance in unbricking my phone.
Haven't used PayPal in a couple of years but if my account is still valid...
Un regalo para ti.
LG G3 D851, Tesla 3.3 Oreo 7.1, Tapatalk 4.9.5
Click to expand...
Click to collapse
OK, I also had the problem of the modem. I adapted a script of @XdaBb to clean the partitions and install all partitions stock. The way more easy, is to install a kdz. As a first measure, install the kdz d85130d from autoprime. After this installs Nimax and tell me if the problem persists. If your use pack of modem of lollipop in marshmallow, means that not only modify the modem.img but also other partitions
Perhaps you can try the new versions and verify if the inconvenient is corrected. This is the telegram beta tester group:
https://telegram.me/joinchat/CDhBIEEpONK55FsfpWEHuA
Sent from my LG-D851 using XDA-Developers mobile app
Thank you for the information. Flashing Fulmics also causes no data.
Since I multiboot and run everything from KitKat to Nougat I probably won't mess around with 30d.
I flashed 30d when it was new. It worked and data was good but it broke my secondary ROMs.
Currently all ROMs are running fine. Will flash KDZ only in an emergency. ðŸ˜
LG G3 D851, crDroid 1.4 N 7.1, microG (NoGapps), Tapatalk 4.9.5
UX5.0 please ???
thienquang07 said:
UX5.0 please
Click to expand...
Click to collapse
Well I have good news, I have managed to adapt the UX5 to our variant using stock firmware D85130E for the Nimax Slim Fit rom. It is currently in the testing phase.
i'm having problems while trying to download the slim fit v2 i tried multiple times but it always get cancelled at 98% can you make another mirror or something ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
IronMan-Rom for the Galaxy S7 is finally here with a dedicated thread on XDA :victory:
Hey guys! Here we are another time
Assuming that you already know me more or less, this rom is based upon latest Samsung Experience 8.5 (Android 7.1.1). I really love the Samung UI, that's why I work on those roms and not on AOSP such as LineageOS, I know I'm a little fanboy
Coming to the features, it's similar to the ones you'll find on my other roms such as BatMan-Rom (for the S8/S8+ and S7/S7e) or the SuperMan-Rom (for the S7/S7e) or even the EOL (End Of Life) HydraRom (for the glorious N7) :good:
The Rom itself contains many many custom features via RomControl, I'll list the most important ones below, still you are very welcome to try them all via the RomControl app (choosable in aroma). Now enough talking, wish you much fun flashing the rom and hope you'll enjoy it! :fingers-crossed:
Nobody is allowed to take stuff from my rom without asking me! Thank you.
IF YOU FOLLOW MY STEPS BELOW, YOU WILL MAY LOSE YOUR WARRANTY, KNOX WILL DISPLAY 0x1! I'M NOT RESPONSIBLE FOR ANY DAMAGED DEVICE!
Rom features of V1.2.0 Nougat:
- Based on latest N950FXXU3BRA8 Nougat base
- Prerooted with SuperSU V2.82 SR5, Phh root r310 or MagiskSU (choose in aroma)
- Magisk V15.4 (aroma selectable)
- Latest Busybox 1.27.2 included in aroma
- Aroma installer! with support up to 4GB zip files
- CSC features are currently not available due to encrypted csc files (a workaround is to use the S8/S8+ csc but I'll figure something out)
- Adblocker included as aroma choice
- Full rom control!! App name is IronControl Free
- Fully deodexed
- Private mode working (only with Modded Settings from aroma)
- LED indicator settings
- choose IOS, Oreo or stock emojis in aroma
- DM-Verity disabled
- Force encrypt disabled
- Modded SystemUI with many tweaks in RomControl (header colors, qs colors, notification colors and much more)
- 3Minit Clock/battery in romcontrol
- Custom clock positions and customizations in romcontrol
- USB Plug/Unplug disable wake up
- Remove high volume warning for headphones
- Torch on lockscreen
- Use volume key on lockscreen to switch music titles
- Knox stuff can be choosen in aroma
- Back to kill and Recent to kill (in RomControl)
- Stock DRAG Kernel or IronKernel (choose in aroma)
- Based off from latest touchwiz source available at this moment
- Many apps are selectable in aroma debloat menu
- Selinux permissive on custom kernel
- Ram bar in recents
- Matrix animation in recents
- Dual speaker sound mod
- Xposed V89.2 included as aroma choice
- Latest January Security Patches (includes Blueborne Bluetooth and Krack wifi fix)
- Many other features, can't list them all, please read changelog to see what changed over the time
Rom review (thanks to @shark jungle):
How to install the rom:
For advanced users:
0. Make sure to have a backup somewhere on external storage
1. Make sure to be on most recent TWRP, bootloader and modem
2. Flash the rom
3. If you need VoLTE or Wifi Calling, flash your correct carrier CSC
4. Done :highfive:
For normal users:
0. Boot your phone, enable OEM unlock in developer settings
1. Flash TWRP with Odin, following this thread Galaxy S7 TWRP until it works correctly (to access download mode, press home+volume down+power on while phone is turned off)
2. Make sure you are using most recent bootloader and modem, latest one available here on Android File Host
3. Now boot into TWRP by pressing home+volume up+power on while phone is turned off
4. If TWRP asks you about allowing system to be edited, swipe yes to confirm
5. In TWRP, go to wipe, format data (a keyboard will pop up now), type "yes" (this will wipe all your data, make sure to have a backup!)
6. After this, reboot recovery and start the rom installer
7. Select your preferences in my aroma installer
8. If you selected to auto update bootloader in aroma, the installer will reboot automatically
9. You can still install my CSC selection if you are customer of a carrier which is not supported by default CSC inside the rom
10. Wait till the rom boots up
11. After setting up, open IronControl Free and let the app apply my default settings!
12. Enjoy the rom!
Downloads for SM-G930F/FD/K/L/S/W8:
V1.2.0 on Android File Host
V1.2.0 on GrifoDev
Bootloader/Modems SM-G930F/FD/K/L/S/W8
CSC Selection for N8 Ports
IronKernel for N8 Ports
Telegram Links:
IronMan News Channel
IronMan-Rom S7/S7e Chat
Known Bugs:
- Iris scanner (if you know how to implement an iris scanner into a s7 let me know )
- face unlock by samsung, we have trusted face by google instead
- Back key light not working due to the fact, that the Note 8 and Galaxy S8 don't have hardware buttons anymore. We need to wait for a similar device as the S7 to get android 7.1.1 to fix it
- Knox related features such as secure folder, samsung pay or samsung pass may not work any longer after rooting your phone
Credits:
- Samsung for the base
- SuperR for his awesome Kitchen
- Chainfire for his SuperSU
- topjohnwu for systemless Magisk V14.5
- amarullz for aroma and nkk71 to make it compatible with bigger zip files
- wubydax and daxgirl for basic RomControl
- myellow for all the great animations!
- mwilky for his fingerprint after reboot mod, private mode, custom colors and other mods
- Asc1977 for a few mods I already used on SuperMan/BatMan
Support:
If you enjoy this I would be really lucky if you would hit thanks :victory:
And if you really really like it, here is a donation link
:good:
PayPal
XDA:DevDB Information
IronMan-Rom SM-G930F, ROM for the Samsung Galaxy S7
Contributors
Tkkg1994
Source Code: https://gitlab.com/Tkkg1994/IronRom
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
ROM Firmware Required: Custom TWRP Recovery
Based On: Stock Based
Version Information
Status: Stable
Current Stable Version: V1.2.0
Stable Release Date: 2018-02-19
Created 2017-12-08
Last Updated 2018-02-22
Changelog:
IronMan-Rom V1.0.0
- Initial release on XDA
IronMan-Rom V1.1.0
- Updated the base from the rom to latest BQK6 release
- This base includes the Krack fix (Krack explained: https://www.krackattacks.com/)
- Fully remodded with all romcontrol features (There are no new features added for now in the RC)
- Updated kernels to latest BQK6 source code (version 1.2.0)
- Updated included csc to BQK6
- Updated all bootloader and modem files to latest for their model
- Added SM-G955N, SM-G950N and SM-N950N bootloader/modem to aroma. So they can also update directly via recovery!
- Updated modded Youtube vanced to most recent version
- Updated patched camera bins thanks to Noxx!
- Added vision to the bixby debloat section, means if you don't select bixby in aroma you also won't get bixby vision this time
- Added a new "edge" debloat feature, if you don't choose it you get the system without all edge functions
- Updated the modded camera thanks to zeroprobe (based on BQK6 release)
- Updated all included recoveries to 3.2.0-0 (except the note 8 didn't got an update yet)
- Removed many google apps from aroma, you can download them via the playstore, this prevents an issue people had with "symlink failed"
IronMan-Rom V1.2.0
- Rebased upon latest BRA8 release
- Updated all kernels to version 1.3.0 (which include latest source code of course)
- Updated magisk to v15.4
- Updated xposed to 89.2
- Updated busybox to latest release
- Updated S7/S7e BL/CP to DRAG
- Updated adaway host files
- Readded OEM switch even to modded settings
- Prevent RMM State Lock (thanks to @blackmesa)
- Update GBWhatsapp and GBInsta to most recent versions
- Update modded youtube to most recent version
- Added a new ironman theme for the aroma installer thanks to Karan_Tamboli
- Fixed RomControl links in "about the rom" not being correct (telegram and xda links)
- Fixed systemui crashing as soon as you are in roaming mode
- Added flipboard and upday to debloat
- Updated all libs and bins to DRAG base
- Updated kernels to DRAG source/ramdisk
- Fixed resolution bug by taking libs from another 7.1.1 base (first boot screen may look a bit weird, I had to change the dpi in developer settings to 360 to get a good value for the s7 screen, default was 480)
Reserved
Reserved
Just as a small addition:
If you are using any 3rd party kernel (not the included IronKernel) you may want to ask your developer to include this wifi hotspot fix. Using 3rd party kernel will break the hotspot function!!
Please, again. If this issue happens it's not an issue with the rom BUT the kernel. I hope all devs will include it for n8 ports
Thanks.
Hello Mr. Tony Stark!
Amazing ROM along with the Iron Kernel, very fluid, fast!
I was in Batman that is also sensational but I decided to test this one and I'm really enjoying it.
Once again, thanks for the great work !!
difference between superman rom and ironman rom
Whats difference between superman rom and ironman rom?
men the samsung Galaxy C9 Pro have android 7.1.1 to fix the key light
ehsan.ean said:
Whats difference between superman rom and ironman rom?
Click to expand...
Click to collapse
Superman ROM is stock S7 Android debloated, made smoother etc
Ironman ROM is a Galaxy Note 8 port
really interesting to test last samsung experience, i download it
Hello is there any android 8 ROM for Samsung galaxy s7 edge?
This rom looks great!!
I have 2 questions,
Do I have to flash the kernel too? (Is it not coming in the zip of the rom itself?
What about the bootloader and modem, those have to be flashed?
Thanks!
dari-woka said:
This rom looks great!!
I have 2 questions,
Do I have to flash the kernel too? (Is it not coming in the zip of the rom itself?
What about the bootloader and modem, those have to be flashed?
Thanks!
Click to expand...
Click to collapse
All Kernel are inclued also bootloader and modem.
- Updated kernels to latest BQK6 source code (version 1.2.0) (choose in aroma)
- Updated all bootloader and modem files to latest for their model
- Added SM-G955N, SM-G950N and SM-N950N bootloader/modem to aroma. So they can also update directly via recovery!
Does this rom have the 6x6 home screen grid and apps screen grid, like in Ambasadii S8 Rom??
Sent from my SM-G955F using Tapatalk
Just out of curiosity, why do so many ROMs have 3Minit Battery as system app? Is it any useful?
rom is great, big thanks tkkg.
i recommend to change dpi settings for better rendering fonts:
adb shell wm density 560 && adb reboot
Rom is great, only thing missing is the 6 x 6 apprdrawer
Can you install GRX Touchwiz V4.0 in the next build ? @Tkkg1994
miniboygr said:
men the samsung Galaxy C9 Pro have android 7.1.1 to fix the key light
Click to expand...
Click to collapse
And it's a snapdragon device so yeah... very compatible with our exynos phone :crying:
Mickfoxx said:
Hello Mr. Tony Stark!
Amazing ROM along with the Iron Kernel, very fluid, fast!
I was in Batman that is also sensational but I decided to test this one and I'm really enjoying it.
Once again, thanks for the great work !!
Click to expand...
Click to collapse
Thanks very much for your feedback, appreciate it a lot!! :good:
pixiebob said:
really interesting to test last samsung experience, i download it
Click to expand...
Click to collapse
I hope you'll enjoy it
Srikanth koti said:
Hello is there any android 8 ROM for Samsung galaxy s7 edge?
Click to expand...
Click to collapse
There are a few AOSP ones, but this isn't related to this rom thread, please check the general Q&A threads (plus this thread is even for s7 and not s7e)
cy56 said:
Just out of curiosity, why do so many ROMs have 3Minit Battery as system app? Is it any useful?
Click to expand...
Click to collapse
Because 3minit is an option in romcontrol. If we don't install it the systemui would constantly crash
pixiebob said:
rom is great, big thanks tkkg.
i recommend to change dpi settings for better rendering fonts:
adb shell wm density 560 && adb reboot
Click to expand...
Click to collapse
Thank you for the feedback !
rfburen said:
Rom is great, only thing missing is the 6 x 6 apprdrawer
Can you install GRX Touchwiz V4.0 in the next build ? @Tkkg1994
Click to expand...
Click to collapse
Hey :good:
This mod is already available via 3rd party flash, so instead of cluttering the rom with 3rd party addons I'd like to keep it clean and let you flash your own mods you prefer
Tkkg1994 said:
And it's a snapdragon device so yeah... very compatible with our exynos phone :crying:
Thanks very much for your feedback, appreciate it a lot!! :good:
I hope you'll enjoy it
There are a few AOSP ones, but this isn't related to this rom thread, please check the general Q&A threads (plus this thread is even for s7 and not s7e)
Because 3minit is an option in romcontrol. If we don't install it the systemui would constantly crash
Thank you for the feedback !
Hey :good:
This mod is already available via 3rd party flash, so instead of cluttering the rom with 3rd party addons I'd like to keep it clean and let you flash your own mods you prefer
Click to expand...
Click to collapse
this is definitely your best work till now
my battery life has almost doubled and my phone is much smoother now :highfive::highfive::highfive: