Related
THREAD NO LONGER SUPPORTED PLEASE GO THERE http://forum.xda-developers.com/lg-g2/development/rom-blisspop-team-blissmust-12b-t2985536
Team Bliss Website
Download
https://www.androidfilehost.com/?w=files&flid=23985
or if you device is not their go to the official sitehttp://downloads.blissroms.com/BlissPop/Official
Irecommend using Banks GApps. The latest are available Here
I'm is not responsible in any way for anything that happens to your device in the process of flashing.
Please familiarize yourself with flashing and custom rom use before attempting to flash the rom.
Please make sure you download the correct version of BlissPop for your specific device. The links are labeled clearly.
Installation
-Make sure you are rooted. And use jb bootloader.
-Make sure you have a custom recovery installed. (TWRP, CWM, Philz CWM)
-Download the latest Bliss Rom & the latest GApps package.
-Boot into recovery.
-Perform a FULL factory wipe and wipe/system and dalvik cache as a precaution
-Flash Bliss Rom
-Flash GAPPs package
-Reboot
As you all know, Lollipop is new and there are going to be bugs.
If you have a major bug to report that has not been reported already, and is not a known issue with CM,
please take the following steps to report it to us. It will save you time, as well as us.
If you have any issue let me know
-Download the Catlog app from the Play Store.
There is also a donate version which you can purchase to show appreciation.
-After downloading the Catlog app, go to the app settings, and change the log level to Debug.
-Clear all previous logs and take the exact steps to produce the error you are receiving.
-As soon as you receive the error (probably a force close), go straight into Catlog and stop the log recording.
-Copy and paste the entire log either to Hastebin or Pastebin
-Save the log, and copy and paste the link into the forum with a brief description of the error.
-You can also open trouble tickets on our website for bugs.
Source :
https://github.com/TeamBliss-LP
I would like to thanks personally @varund7726 for helping me a lot with building
Thanks to the bliss team !!
XDA:DevDB Information
BlissPop Unofficial , ROM for the LG G2
Contributors
genesixxbf3, pjgraber03, ElfinJNoty, Deliberate, Electrikjesus
Source Code: https://github.com/TeamBliss-LP
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: 12b bootstack
Based On: CyanogenMod
Version Information
Status: Nightly
Created 2015-01-07
Last Updated 2015-01-11
Reserved
genesixxbf3 said:
First i'm not a dev form the Bliss-team i just build for them because they might have forgotten us
Team Bliss Website
Download
HTML:
https://mega.co.nz/#F!RU8EUbAZ!ebhTr_RYNoLqlC1utAcpbQ
or if you device is not their go to the official site
HTML:
"http://downloads.blissroms.com/BlissPop/Official
Irecommend using Banks GApps. The latest are available Here
I'm is not responsible in any way for anything that happens to your device in the process of flashing.
Please familiarize yourself with flashing and custom rom use before attempting to flash the rom.
Please make sure you download the correct version of BlissPop for your specific device. The links are labeled clearly.
-Make sure you are rooted.
-Make sure you have a custom recovery installed. (TWRP, CWM, Philz CWM)
-Download the latest Bliss Rom & the latest GApps package.
-Boot into recovery.
-Perform a FULL factory wipe and wipe/system and dalvik cache as a precaution
-Flash Bliss Rom
-Flash GAPPs package
-Reboot
As you all know, Lollipop is new and there are going to be bugs.
Please bear with us while we work on getting things updated, and all errors fixed.
If you have a major bug to report that has not been reported already, and is not a known issue with CM,
please take the following steps to report it to us. It will save you time, as well as us.
-Download the Catlog app from the Play Store.
There is also a donate version which you can purchase to show appreciation.
-After downloading the Catlog app, go to the app settings, and change the log level to Debug.
-Clear all previous logs and take the exact steps to produce the error you are receiving.
-As soon as you receive the error (probably a force close), go straight into Catlog and stop the log recording.
-Copy and paste the entire log either to Hastebin or Pastebin
-Save the log, and copy and paste the link into the forum with a brief description of the error.
-You can also open trouble tickets on our website for bugs.
Source :
https://github.com/TeamBliss-LP
The Bliss Team:
Thanks to the bliss team !!
XDA:DevDB Information
BlissPop Unofficial , ROM for the LG G2
Contributors
genesixxbf3, pjgraber03, ElfinJNoty, Deliberate, Electrikjesus
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: 12b bootstack
Based On: CyanogenMod
Version Information
Status: Nightly
Created 2015-01-07
Last Updated 2015-01-07
Click to expand...
Click to collapse
thanks man can't wait till 1.6 will be online.
love this rom
vitök said:
thanks man can't wait till 1.6 will be online.
love this rom
Click to expand...
Click to collapse
you're welcome
i will release 1.6 for a lot of devices before this we
Good job and then the link is on mega fast good.
The features of this rom?
Don't mind me, just lurking around like usual.
Newest features added lately to BlissPop:
Customizable Quick Settings
Customizable Power Menu
Notification Icon Options
More Statusbar Options
Integrated CM Performance Control
Customizable System Animations
Latest CM12 Commits and Upstream Merges
Official Lollipop Sounds
Improved Dark Theme
Cleaned Up Battery Code
And lots more.
<- Click me for m8 downloads!
remicks said:
Don't mind me, just lurking around like usual.
Newest features added lately to BlissPop:
Customizable Quick Settings
Customizable Power Menu
Notification Icon Options
More Statusbar Options
Integrated CM Performance Control
Customizable System Animations
Latest CM12 Commits and Upstream Merges
Official Lollipop Sounds
Improved Dark Theme
Cleaned Up Battery Code
And lots more.
<- Click me for m8 downloads!
Click to expand...
Click to collapse
thanks to come here and not reprimand me !!
genesixxbf3 said:
thanks to come here and not reprimand me !!
Click to expand...
Click to collapse
Not at all bud, I cruise the unofficial threads and offer help and support when I can and nominate new members to the team if they will be a good fit. Subscribed here, will be around checking in and helping when I can.
Game on!
<- Click me for m8 downloads!
For the D800 do not see the download ???
I would like to try it on my D800
magf_18 said:
I would like to try it on my D800
Click to expand...
Click to collapse
take a look at the second link ;D
1.6 will come tonight for d801-d802-d803
@genesixxbf3
I didn't see anything in the OP about needing a JB Bootloader.
Does this version still require JB bootloader like the official?
Thanks
spec4 said:
@genesixxbf3
I didn't see anything in the OP about needing a JB Bootloader.
Does this version still require JB bootloader like the official?
Thanks
Click to expand...
Click to collapse
I am not genesixxbf3, but I have been running BlissPop on my D801. I am using the bootloader that was installed by AutoRec (Jelly Bean) and the most up to date radios (kitkat from D80120E_00.kdz firmware). I am not having any issues with this combo. Auto-rotation, camera, and GPS work for me.
Matt
spec4 said:
@genesixxbf3
I didn't see anything in the OP about needing a JB Bootloader.
Does this version still require JB bootloader like the official?
Thanks
Click to expand...
Click to collapse
It's at the bottom will add it next to the download section
pudgewack said:
I am not genesixxbf3, but I have been running BlissPop on my D801. I am using the bootloader that was installed by AutoRec (Jelly Bean) and the most up to date radios (kitkat from D80120E_00.kdz firmware). I am not having any issues with this combo. Auto-rotation, camera, and GPS work for me.
Matt
Click to expand...
Click to collapse
Thanks for helping me!
pudgewack said:
I am not genesixxbf3, but I have been running BlissPop on my D801. I am using the bootloader that was installed by AutoRec (Jelly Bean) and the most up to date radios (kitkat from D80120E_00.kdz firmware). I am not having any issues with this combo. Auto-rotation, camera, and GPS work for me.
Matt
Click to expand...
Click to collapse
Great! I've been running Liquidsmooth Milestone 3.2 for a while now. I did AutoRec too so I have the same thing as you.
Thanks!
I have version 1.5 installed on my D800, but no upgrade to 1.6 yet ??
magf_18 said:
I have version 1.5 installed on my D800, but no upgrade to 1.6 yet ??
Click to expand...
Click to collapse
i'm gonna build it tonight
ok thanks the'll wait impatiently :good:
LiquidSmooth & Euphoria-OSAll builds are unofficial
GEE users flashing my non-GPROJ ROMs, flash one of the GEE kernels below in the downloads section, after flashing the ROM.
DISCLAMER
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
Please do some research if you have any concerns about features included in this ROM before flashing it!
YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Code:
ABOUT THE ROMS
LIQUIDSMOOTH
LiquidSmooth is an aftermarket firmware based on the Android Open Source Project.
Dedicated to providing users with smooth, stable and fast ROMs. A Lightweight modified AOSP base, and then add the features you crave!
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device.
We ask that you do your part to know your device and know how to recover from problems before you flash!
Click to expand...
Click to collapse
Code:
SOURCE CODE
GPROJ BASED
ROM: https://github.com/LiquidSmooth
KERNEL: https://github.com/CyanogenMod/lge-kernel-gproj
DEVICE: https://github.com/CyanogenMod/android_device_lge_ls970
VENDOR: https://github.com/TheMuppets/proprietary_vendor_lge
DEVICE COMMON: https://github.com/CyanogenMod/android_device_lge_gproj-common
DEVICE COMMON: https://github.com/CyanogenMod/android_device_lge_ls970-common
Click to expand...
Click to collapse
Code:
DOWNLOADS
LIQUIDSMOOTH ROM
LiquidSmooth - Android 5.0.2 - 02/04/15 - AndroidFileHost
LiquidSmooth - Android 5.0.2 - 03/17/15 - AndroidFileHost (GPROJ)
LIQUIDSMOOTH V4.0 (Android 5.0.*)
LiquidSmooth 01/18/15 - AndroidFileHost (GPROJ)
LiquidSmooth 01/29/15 - AndroidFileHost (GPROJ)
EUPHORIA-OS ROM
Euphoria-OS - Android 5.1.1 - 06/10/15 - AndroidFileHost
EUPHORIA-OS ROM V1.1 (Android 5.1.*)
Euphoria-OS 05/18/15 - AndroidFileHost (GPROJ)
GAPPS
Nano Modular Pachage - Android 5.1.*
KERNELS
Here are some other kernels for Gee and Geeb. If you get flashing colors try the other kernel of the same name.
I didn't make these kernels, I found them on other threads for this device. Threads are listed below.
GEE-MAKO
KERNELS - Android 5.1.*
Solid Kernel V1.82
Franco r217.5
Hells-Core b75-L
KERNELS - Android 5.0.*
Solid Kernel V1.61
Jolla AIO Gen2-v2.5 (GUI Aroma Installer - Mod and Non-Mod) [Instructions]
Franco r216
Hells-Core b69
Hells-Doctor FrAndroid 0224
Hells-Doctor Numeriks 0403
Mirage 020515
KERNELS - Android 4.4.*
Solid Kernel V1.5
AK-CM 360
AK-AOSP 360 (Works with this build)
Franco r212
Franco-MOD r212 (Works with this build)
Matr1x V14.2
Matr1x-MOD V14.2(Works with this build)
Jolla AIO Gen2-v1.2 (GUI Aroma Installer - Mod and Non-Mod) [Instructions]
GPROJ
KERNELS - Android 5.1.*
Solid Kernel V1.8.2 (GEE)
Jolla AIO Gen3-v1.2 (GEE)
KERNELS - Android 5.0.*
Solid Kernel V1.61 (GEE)
KERNELS - Android 4.4.*
Solid Kernel V1.5 (GEE)
STOCK
KERNELS - Android 5.0.*
AK 600 (GEE)
Matr1x (GEE)
KERNELS - Android 4.4.*
Solid Kernel V1.82 (GEE)
RECOVERY
TWRP 2.8.6.0
FIXES
SuperSU
Click to expand...
Click to collapse
INSTALLATION
Wipe Data, System, Cache, Dalvik Cache
Flash LiquidSmooth ROM
Flash GApps
Reboot
UPDATING
Nand Backup Using Recovery
Erase Previous Backup (Saves Space)
Flash LiquidSmooth ROM Update
Wipe: Cache, Dalvik
Reboot
Click to expand...
Click to collapse
Code:
THREADS MENTIONED
Gapps 5.0.*
SuperSU
Jolla Kernel
Solid Kernel
Matr1x Kernel
Franco Kernel
TWRP recovery
ViPER4Android Audio Effects
XDA:DevDB Information
LiquidSmooth, ROM for the Sprint LG Optimus G
Contributors
clementinox
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
Version Information
Status: Alpha
Created 2015-01-26
Last Updated 2015-06-14
Reserved
Reserved
I currently do not own this device but will try my best to fix what I can.
Flash and enjoy!
clementinox said:
I currently do not own this device but will try my best to fix what I can.
Flash and enjoy!
Click to expand...
Click to collapse
So you haven't (let it) tested at all?
Kevinjoa said:
So you haven't (let it) tested at all?
Click to expand...
Click to collapse
I have had one person test it. He said all functions of the phone seem to be working except maybe the carrier name was wrong, it said Sprint instead of his carrier where he lives.
Kevinjoa said:
So you haven't (let it) tested at all?
Click to expand...
Click to collapse
clementinox said:
I have had one person test it. He said all functions of the phone seem to be working except maybe the carrier name was wrong, it said Sprint instead of his carrier where he lives.
Click to expand...
Click to collapse
I can't get either of you guys' liquid builds to boot. It keeps looping at the "LIQUIDSMOOTH" With the symbol below the words. It gets past the water pouring, but keeps looping at the second part. I just let it sit for 10 minutes and nothing changed. I didn't flash anything extra, rom only. They both do the same thing. I don't mean to cross threads here since Kevin built one as well. But I figured I would mention it here since you both posted.
Any suggestions either of you?
dopy25 said:
I can't get either of you guys' liquid builds to boot. It keeps looping at the "LIQUIDSMOOTH" With the symbol below the words. It gets past the water pouring, but keeps looping at the second part. I just let it sit for 10 minutes and nothing changed. I didn't flash anything extra, rom only. They both do the same thing. I don't mean to cross threads here since Kevin built one as well. But I figured I would mention it here since you both posted.
Any suggestions either of you?
Click to expand...
Click to collapse
Is this on a clean install? As In TWRP wipe data, dalvik cache, cache and system. DO NOT WIPE INTERNAL STORAGE. Then flash the rom.
I have had one person already test it out and his is using it currently on LS970, boots just fine. You could also try wiping cache and dalvik cache if it loops.
Considering its on both roms Its probably not rom related.
What device do you have exactly?
clementinox said:
Is this on a clean install? As In TWRP wipe data, dalvik cache, cache and system. DO NOT WIPE INTERNAL STORAGE. Then flash the rom.
I have had one person already test it out and his is using it currently on LS970, boots just fine. You could also try wiping cache and dalvik cache if it loops.
Considering its on both roms Its probably not rom related.
What device do you have exactly?
Click to expand...
Click to collapse
I apologize for not being more specific.
1) yes it was an install on a clean partition. I use multiRom and installed it as a secondary rom, which is basically like installing the rom on a virtually clean partition. I have been doing this for awhile and only ran into a few issue. One being stock based roms as secondary. The other issues I have had are ROM or recovery based.
2) I am using an LS970 LG Optimus G from Sprint.
3) the roms I tried and am mentioning here are both LiquidSmooth so it very possibly could be rom (sources) based. I have no issues with Kevins device sources, the same with gproj sources, which I believe you used for the LS970.
I will try to install it again and wipe data, and caches before booting. That may help.
dopy25 said:
I apologize for not being more specific.
1) yes it was an install on a clean partition. I use multiRom and installed it as a secondary rom, which is basically like installing the rom on a virtually clean partition. I have been doing this for awhile and only ran into a few issue. One being stock based roms as secondary. The other issues I have had are ROM or recovery based.
2) I am using an LS970 LG Optimus G from Sprint.
3) the roms I tried and am mentioning here are both LiquidSmooth so it very possibly could be rom (sources) based. I have no issues with Kevins device sources, the same with gproj sources, which I believe you used for the LS970.
I will try to install it again and wipe data, and caches before booting. That may help.
Click to expand...
Click to collapse
Hi there!
I was the one that actually tested the previous build for clementino and I am using it as a daily driver. I used the previous build and am downloading this new build as I type this reply. From what I had read around, using the lollipop build as a secondary doesn't always work.
first boot of LS 4.0 after clean install could take up to 10 - 15 minutes so I would suggest to wait that long as well. I use the Sprint LG Optimus G LS970 as well but I bought it in Indonesia as an unlocked phone and it already has another service provider on it with working data plan. This causes some problems for me at times when changing ROMs because it would sometimes cause me to lose data. Never the less the build is solid.
I assume this new build eliminates the CM theme engine and added RRO. Overall, I'm just excited about this new build.
shindou01 said:
Hi there!
I was the one that actually tested the previous build for clementino and I am using it as a daily driver. I used the previous build and am downloading this new build as I type this reply. From what I had read around, using the lollipop build as a secondary doesn't always work.
first boot of LS 4.0 after clean install could take up to 10 - 15 minutes so I would suggest to wait that long as well. I use the Sprint LG Optimus G LS970 as well but I bought it in Indonesia as an unlocked phone and it already has another service provider on it with working data plan. This causes some problems for me at times when changing ROMs because it would sometimes cause me to lose data. Never the less the build is solid.
I assume this new build eliminates the CM theme engine and added RRO. Overall, I'm just excited about this new build.
Click to expand...
Click to collapse
I have CM12 for LS970 installed as secondary. With the updated TWRP there are no issues on installing Lollipop as primary or secondary. I am not trying to bash. I am trying to install Liquid smooth. I had Kevins Liquid Trex and it was awesome, but now there are newer versions and updates and fixes. Every other LP rom has installed fine. The only other thing I will try is to install as primary. If it works, I can backup, then restore it as secondary.
Also, what do you mean updated? Have you not tried the 01-18 build that is linked in the OP?
dopy25 said:
I have CM12 for LS970 installed as secondary. With the updated TWRP there are no issues on installing Lollipop as primary or secondary. I am not trying to bash. I am trying to install Liquid smooth. I had Kevins Liquid Trex and it was awesome, but now there are newer versions and updates and fixes. Every other LP rom has installed fine. The only other thing I will try is to install as primary. If it works, I can backup, then restore it as secondary.
Also, what do you mean updated? Have you not tried the 01-18 build that is linked in the OP?
Click to expand...
Click to collapse
I'm sorry dopy25, I thought that clementinox has uploaded another build since he already uploaded the new builds he had for geeb. I didn't realize it until the download was completed. The 01-18 build is the one I'm running. But I think he's prepared another build. The only issue I encountered with this build, aside from the mentioned wrong carrier name is that in the lock screen it would show (no sim - Sprint) at the top left corner. Although text and calls work, my data doesn't and I assume it has something to do with my phone not on Sprint (APNs etc).
@dopy25
You need do update multirom TWRP once again, there was fixes for some ROMs which us block based zips, my liquid is working as secondary now and his should also.
Kevinjoa said:
@dopy25
You need do update multirom TWRP once again, there was fixes for some ROMs which us block based zips, my liquid is working as secondary now and his should also.
Click to expand...
Click to collapse
You are absolutely right. After the update I grabbed from your server, I was able to install both Liquid roms as secondary. However, neither have the developer options available. Is there a different way to activate them in Liquid?
Also, @clementinox I have pretty much everything working in your ROM, but it caused my boot loader to freeze at the google loading screen. That was on reboot. It just sat there. So I had to go in recovery and wipe stuff again. So, to everyone else wanting to try this with gproj sources. It does indeed work.
Finally another Lollipop ROM!
Downloading now, if something goes wrong I'll report, thanks! :good:
Download link sends me to 01/18 is that the last build?
FcoEnrique said:
Finally another Lollipop ROM!
Downloading now, if something goes wrong I'll report, thanks! :good:
Download link sends me to 01/18 is that the last build?
Click to expand...
Click to collapse
Yes its the last build, I will be uploading a new version today, haven't had time to build one before now.
clementinox said:
Yes its the last build, I will be uploading a new version today, haven't had time to build one before now.
Click to expand...
Click to collapse
Whoohoo... I knew it... backing up data and preparing to clean flash another build by @clementinox .
LiquidSmooth V4.0 GPROJ ROM Updated!
Announcements
Flash and enjoy! If you like the ROM give a thumbs up!
Changelogs
LiquidSmooth Gerrit
LiquidSmooth Github
As Expected, downloaded and will try out your newest build.
Have you found the cause of the No Sim Card sign on the lockscreen or is it still there? Hopefully with this new update I can set the APN to my carrier's and get working data again! Thanks clementinox! :fingers-crossed:
I love the extra features against other ROMs (like cyanogem) but... I really miss themes, which was a "hell no!" when I found that it is not present in the ROM... And editable QS... So I'll in the meantime...
I Hope to see a build with all that in the future :good:
I don't feel like doing multiple threads, so here will be a GZR thread for Hydrogen.
GZR includes 3 ROMs : Tipsy, Tesla and Validus
I might even put my SlimRoms unofficial builds here too someday later.
What is it?
I am one of the maintainer at Ground Zero Roms, Martin and John are the two lead devs at Ground Zero ROMs.
It all started with Validus a long time ago. Both of them started their own project out of boredom and to test some stuff, so Tipsy and Tesla saw the light.
What is it now?
- Tipsy is Slim base with full OMS support. It is still WIP. No build rolling yet
- Tesla is GZ-AOSP (Fancy name of AOSP-CAF?) base with full OMS support and has handpicked useful features.
- Validus is GZ-AOSP based too with a dark wolfie theme with full OMS support too and have a lot of features.
Useful Downloads :
Latest Tesla : https://www.androidfilehost.com/?fid=673368273298921194
Latest Validus : https://www.androidfilehost.com/?fid=745425885120695455
Latest Tipsy : https://www.androidfilehost.com/?fid=673368273298921399
Initial Slim : https://www.androidfilehost.com/?fid=673368273298925634
Gapps : Open Gapps
G+ Community Link : https://plus.google.com/communities/109330559573276360638
More useful Links : https://plus.google.com/+CharG/posts/54keMXfqd3E
Source Links :
Validus Github : https://github.com/gzr-validusos
Tipsy Github : https://github.com/tipsyos
Tesla Github : https://github.com/teslarom-n
Kernelhttps://github.com/CyanogenMod/android_kernel_motorola_msm8226/commits/cm-14.1
GZR G+ Community
https://plus.google.com/communities/109330559573276360638
Substratum G+ Community
https://plus.google.com/u/0/communities/102261717366580091389
Theme Ready and TBO apps
http://forum.xda-developers.com/showthread.php?t=3113192
http://forum.xda-developers.com/showthread.php?t=2283828
GZR TWRP Themes
https://onedrive.live.com/?id=67559CDE482EDC1E%21762&cid=67559CDE482EDC1E
George's Tesla TWRP theme
https://plus.google.com/114004832310481604983/posts/AEpG9Sgpbmc
Installation Instructions
ALWAYS MAKE A NANDROID BACKUP FIRST!
Coming from another rom/clean install:
Reboot to recovery
Wipe system, cache, dalvik/art cache, data
Flash rom zip and gapps
Reboot
If you want root access, SuperSU will need to be flashed, v2.78 works for me. After flashing, your device may boot twice before boot animation, don't worry it'll be fine after that.
Substratum support is there as long as you have root and latest Substratum app. Some themes may have a little catching up to do, have fun testing them!
Xposed is not supported here, if you want to run it and have issues, try an Xposed thread for support and bug reports here only welcome with a clean install with no Xposed present.
Banks Gapps
https://telegram.me/mrbanksgapps
Open Gapps
http://opengapps.org/
How to report bugs
Code:
1. Which device you're using & the variant
2. Which ROM you're running & the date of build
3. Whether you clean flashed (wiping data, cache, dalvik & system) or dirty flashed, didn't wipe system, data, or caches
4. Whether you're using the stock or custom kernel
5. If you have xposed, v4a or other modifications installed
6. A detailed description/of the problem you're having, Also steps to reproduce it and include logs when necessary
7. Which recovery you're using & which version
8. Which gapps you used and the date
XDA:DevDB Information
GZR Roms, ROM for the Moto G 2014
Contributors
koradiavatsal
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Unlocked Bootloader
Based On: AOSP,Slim
Version Information
Status: Stable
Created 2015-06-16
Last Updated 2017-01-22
Features & Screenshotshttp://forum.xda-developers.com/showpost.php?p=69155359&postcount=2
Known Bugs/ Issues:
1. Setting a lockscreen wallpaper with built in Nova - To get this option a workaround is to enter the Nova Beta program and update to the latest beta, then when you long press the homescreen to choose a wallpaper, once you have chosen, there is an option to add as lockscreen, homescreen or both.
2. You tell me... :laugh:
Reserved
Nice Work Dude!
Keep it UP!
Legend Bro
access denied!!
to enter the download link in androidfilehost says access denied to me that this is due ??
julianenciso93 said:
to enter the download link in androidfilehost says access denied to me that this is due ??
Click to expand...
Click to collapse
For me it do not deny the access, but it request to log in...
all links here
https://www.androidfilehost.com/?w=files&flid=33703
direct link for titan
https://www.androidfilehost.com/?fid=24052804347760227
Does it support the Dual SIM of XT1068?
pawanyadav said:
all links here
https://www.androidfilehost.com/?w=files&flid=33703
direct link for titan
https://www.androidfilehost.com/?fid=24052804347760227
Click to expand...
Click to collapse
thanks bro and I could download :good:
iwogu said:
Does it support the Dual SIM of XT1068?
Click to expand...
Click to collapse
Yes
Sent from my Moto G 2014 using XDA Free mobile app
Which gapps do you suggest using with this rom?
n2droid said:
Which gapps do you suggest using with this rom?
Click to expand...
Click to collapse
I use the TK GApps (pico) and faced no problem during installation.
koradiavatsal said:
Ground Zero Roms presents -Tesla- for Titan
Beautiful ROM sir...found that it reboots while uninstalling some apps sometimes...
Click to expand...
Click to collapse
Cm based?and Kernel?good job by the way
andromuks said:
koradiavatsal said:
Ground Zero Roms presents -Tesla- for Titan
Beautiful ROM sir...found that it reboots while uninstalling some apps sometimes...
Click to expand...
Click to collapse
No such issue here
Using this since a week
Palkian said:
Cm based?and Kernel?good job by the way
Click to expand...
Click to collapse
Slim = aosp+caf
Sent from my Moto G 2014 using XDA Free mobile app
Click to expand...
Click to collapse
For now all OK, no FC at the time.
Can't find disable empty second SIM, any of you found that?
Thanks
Sent from My XT1068
Sorry My English
Great Rom! Everything works good for me! No FC's no random reboots
does this rom has the call bug where you can't hear anything on a call unless you switch to speakers
I really want to try it out soon!
djekan said:
For now all OK, no FC at the time.
Can't find disable empty second SIM, any of you found that?
Thanks
Sent from My XT1068
Sorry My English
Click to expand...
Click to collapse
CM merged aosp icons hence that option is removed even in cm12.1
Anyways check general section for a guide from @Vidhanth
You can do it easily
This is my build of CyanogenMod rom for our lovely Optimus G [MM] Working on e975 & f180 will be here for all g variant when stable..
Download From Here
Last Release Is V2.1
Ps: You can make dirtyflash if you are already on CM13
Flashing instuctions:
Download the Rom
Download Gapps
Optionally Download SuperSu Zip
Download TWRP from here
Make full wipe
Flash the ROM Zip & Gapps (Optionally Flash SuperSu Zip)
Enjoy
PS:
- First Boot Can Take Up to 5-7Mins
THANKS TO:
All Optimus G Devloppers
Screenshots:
XDA:DevDB Information
UNOFFICIAL CyanogenMod 13, ROM for the LG Optimus G
Contributors
ChiKaLiO
Source Code: https://github.com/CyanogenMod/android
Device: https://github.com/ChiKaLiO/android_device_lge_geehrc
Kernel: https://github.com/ChiKaLiO/android_kernel_lge_geehrc
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Testing
Current Beta Version: 2015-11-16
Beta Release Date: 2015-11-16
Created 2016-01-17
Last Updated 2016-01-16
wow great. I take for testing.
Thank you very much.
st4ik said:
wow great. I take for testing.
Thank you very much.
Click to expand...
Click to collapse
cm gapps are ther :*
Feedback ?
of course
to gapps is probably broken link.
hi,
rom ported from nexus 4 ?
which bugs found ?
thanks.
Sensors doesn't work, (never work).
Root Explorer, Busybox and others apps are crash.
I attached my catlog here.
Good Luck !
adiniz said:
Sensors doesn't work, (never work).
Root Explorer, Busybox and others apps are crash.
I attached my catlog here.
Good Luck !
Click to expand...
Click to collapse
Maybe u must flash axion cat rom , reboot system, reboot rexovery wipe data csche and then flash this rom
Congratulations excellent ROM ... it all works very well I hope to keep doing this ... because ROM is perfect
ChiKaLiO said:
This is my build of CyanogenMod rom for our lovely Optimus G [MM] Working on e975 & f180 will be here for all g variant when stable..
Downloads:
Gapps
Rom
Flashing instuctions:
Download the Rom
Download Gapps
Download TWRP from here
Make full wipe
Flash the ROM zip & Gapps
Enjoy
PS:
- First Boot Can Take Up to 5-7Mins
THANKS TO:
All Optimus G Devloppers
Screenshots:
XDA:DevDB Information
UNOFFICIAL CyanogenMod 13, ROM for the LG Optimus G
Contributors
ChiKaLiO
Source Code: https://github.com/CyanogenMod/android
Device: https://github.com/ChiKaLiO/android_device_lge_geehrc
Kernel: https://github.com/ChiKaLiO/android_kernel_lge_geehrc
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Testing
Current Beta Version: 2015-11-16
Beta Release Date: 2015-11-16
Created 2016-01-17
Last Updated 2016-01-16
Click to expand...
Click to collapse
Thanks man, correct the reference to gapps.
There's only one problem ... The coupling Mi band with me not working ... need to fix something in bluetooth The rest seems to go smoothly
This is a test version so.. and Gapps link is fixed sensors are good..
next release less bugs.. :*
ChiKaLiO said:
This is a test version so.. and Gapps link is fixed sensors are good..
next release less bugs.. :*
Click to expand...
Click to collapse
if you use opengapps why not use official link? http://opengapps.org/ its gets aupdated all the time...
rom works very well. Sensors and Bluetooth also.
So far I have not found any major problems.
Very well done. I look forward to permanently update
christboanerges said:
Maybe u must flash axion cat rom , reboot system, reboot rexovery wipe data csche and then flash this rom
Click to expand...
Click to collapse
lol lol lol... My friend, I installed thousands of roms geehrc in my life.
this bug with sensors also occurred in first version of Resurrection 6.0
and it was solved perfectly in others versions of Resurrection.
Unfortunately sensors doesn't work only CM13 Unofficial.
I 'm using the Nitrogen 6.0 perfectly now with all sensors Ok !
( My model is E977 South America ).
Thanks.
---------- Post added at 04:53 PM ---------- Previous post was at 04:27 PM ----------
ChiKaLiO said:
This is a test version so.. and Gapps link is fixed sensors are good..
next release less bugs.. :*
Click to expand...
Click to collapse
Hi,
Sensors doesn't work for all models,
Do you checked the logcat sent ?
Root Explorer, Busybox and others apps are crash.
Thanks.
iakoboss7 said:
if you use opengapps why not use official link? http://opengapps.org/ its gets aupdated all the time...
Click to expand...
Click to collapse
For people wjo don t know whatto download..
Thank you man! My will is to test it now, but the OG is my main phone so I'm gonna wait for a stable release XD
stefano4d said:
Thank you man! My will is to test it now, but the OG is my main phone so I'm gonna wait for a stable release XD
Click to expand...
Click to collapse
it's stable i'm using it for 2 daysand no problem so far got 32000 in antutu benchmark 8|
ChiKaLiO said:
it's stable i'm using it for 2 daysand no problem so far got 32000 in antutu benchmark 8|
Click to expand...
Click to collapse
Okay, installing it now hahahahah.
How do you guys perform the wipes to install ROM's? Everytime I need to do it, the new system folder get bigger that the older (the phone isn't erasing the old data, just adding the new system).
When I try to use the option wipe data + erase, the phone erase everything and I need to do a recovery before reinstalling a ROM (I'm doing it now ).
It's not just perform wipe data, wipe cache and dalvik cache? That's what I'm doing.
Is it possible to somehow fix the problem with the installation of BusyBox?
stefano4d said:
Okay, installing it now hahahahah.
How do you guys perform the wipes to install ROM's? Everytime I need to do it, the new system folder get bigger that the older (the phone isn't erasing the old data, just adding the new system).
When I try to use the option wipe data + erase, the phone erase everything and I need to do a recovery before reinstalling a ROM (I'm doing it now ).
It's not just perform wipe data, wipe cache and dalvik cache? That's what I'm doing.
Click to expand...
Click to collapse
wipe system data dalvik cashe and cashe in advanced
Presenting ResurrectionRemix unofficial build. This is only possible due to the work of Ziyan, MWisBest and musical_chairs.
How-To
Unlock your device
Flash custom recovery (CWM or TWRP)
Flash ROM through recovery
Flash GApps (Optional)
Reboot system
Enjoy
Downloads:
Latest RR build: https://www.androidfilehost.com/?fid=312968873555002779
All builds: https://www.androidfilehost.com/?w=files&flid=81665
Bugs:
LTE Data does not work. (3G works)
OTA Updater does not work.
Source Code:
https://github.com/ResurrectionRemix
https://github.com/CyanogenMod
XDA:DevDB Information
Resurrection Remix Marshmallow for toroplus, ROM for the Samsung Galaxy Nexus
Contributors
Ckpe4
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.0.x
ROM Firmware Required: Custom recovery
Based On: ResurrectionRemix, CM
Version Information
Status: Beta
Current Beta Version: 5.7.4
Beta Release Date: 2016-10-02
Created 2016-07-18
Last Updated 2016-10-02
Reserved
Reserved Post
My first ROM, which I decided to share.
I hope you enjoy it.
Gonna try it right now
This rom is a "compilation" of other marshmallow roms, right?
Gamiel Isaac Orejudos said:
Gonna try it right now
This rom is a "compilation" of other marshmallow roms, right?
Click to expand...
Click to collapse
This rom is a "compilation" of other marshmallow roms, right?
Click to expand...
Click to collapse
Something like that. It is a CM based ROM with a lot of features from other ROM`s.
New build up.
Fixed OTA, Synced with RR.
Probably fixed OTG. Need to be tested. (thanks to Ziyan)
New build.
New RR version. (now 5.7.3, was 5.7.1) Changelog.
And August security patch.
Download.
???
why did u touch that? Are u really reading TFM? Do u understand why doesn't work the radio? My radio works without problems until i come back to the US(3G only of course). Now sometimes i saw "No service"(too often) - i was flashing CM13 8/17
Ckpe4 said:
Presenting ResurrectionRemix unofficial build. This is only possible due to the work of Ziyan, MWisBest and musical_chairs.
How-To
Unlock your device
Flash custom recovery (CWM or TWRP)
Flash ROM through recovery
Flash GApps (Optional)
Reboot system
Enjoy
Downloads:
Latest RR build: https://www.androidfilehost.com/?fid=24591000424954224
All builds: https://www.androidfilehost.com/?w=files&flid=81665
Bugs:
LTE Data does not work. (3G works)
OTA Updater does not work.
Source Code:
https://github.com/ResurrectionRemix
https://github.com/CyanogenMod
XDA:DevDB Information
Resurrection Remix Marshmallow for toroplus, ROM for the Samsung Galaxy Nexus
Contributors
Ckpe4
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.0.x
ROM Firmware Required: Custom recovery
Based On: ResurrectionRemix, CM
Version Information
Status: Beta
Current Beta Version: 5.7.3
Beta Release Date: 2016-08-12
Created 2016-07-18
Last Updated 2016-08-12
Click to expand...
Click to collapse
Loved this rom,
Btw witch gapps u used? I've filed installing pico open gapps, also a-gaaps
This ROM worked well for about a week, the battery died last night so I plugged in power, powered up and it never got past the boot screen. Had to factory reset, and it still took an age (20+ mins) to boot and was ridiculously hot. When it did finally boot it didn't connect to a network.
Before the battery died, I'd just finished installing a few apps (and was shooting some video) so it's possible that one of them caused the issue. The other weird thing was the clock was stuck on UTC, even with the correct time/date settings. I had to use a clock sync app to fix. I suspect the Offline Maps app, but couldn't test as the issues started soon after.
syco123 said:
This ROM worked well for about a week, the battery died last night so I plugged in power, powered up and it never got past the boot screen. Had to factory reset, and it still took an age (20+ mins) to boot and was ridiculously hot. When it did finally boot it didn't connect to a network.
Before the battery died, I'd just finished installing a few apps (and was shooting some video) so it's possible that one of them caused the issue. The other weird thing was the clock was stuck on UTC, even with the correct time/date settings. I had to use a clock sync app to fix. I suspect the Offline Maps app, but couldn't test as the issues started soon after.
Click to expand...
Click to collapse
I dont have problem with clock setting, the rom run very well, even for gaming.
Need gapps for sync my data
My calendar wouldn't sync, I had to download the google calendar from the play store and that fixed it.
---------- Post added at 10:09 PM ---------- Previous post was at 10:07 PM ----------
culaponk said:
I dont have problem with clock setting, the rom run very well, even for gaming.
Need gapps for sync my data
Click to expand...
Click to collapse
Open gapps should work i think. It's a Cyanogenmod based ROM. I used the ones from this guide
http://highonandroid.com/download-android-6-0-marshmallow-gapps/
Failed, Twrp said "insufficient storage"
culaponk said:
Btw witch gapps u used?
Click to expand...
Click to collapse
I`m using MicroG (sometimes a bit unstable, but good for me because uses less RAM). Open gapps pico should work well (Platform: ARM, Android 6.0).
Ckpe4 said:
I`m using MicroG (sometimes a bit unstable, but good for me because uses less RAM). Open gapps pico should work well (Platform: ARM, Android 6.0).
Click to expand...
Click to collapse
RR 574 released, would you build for us? Or for me lol
culaponk said:
RR 574 released, would you build for us? Or for me lol
Click to expand...
Click to collapse
Yes. As soon as I will have enough time. Perhaps on the weekend.
syco123 said:
This ROM worked well for about a week, the battery died last night so I plugged in power, powered up and it never got past the boot screen. Had to factory reset, and it still took an age (20+ mins) to boot and was ridiculously hot. When it did finally boot it didn't connect to a network.
Click to expand...
Click to collapse
I use this firmware for several months. Nothing like this happened.
Exactly what programs you installed?
Sorry, I can't remember which ones were installed, and I've moved on to another ROM. Only play store apps though.
New build up!
Changelog:
New RR version (5.7.4). Resurrection Remix changelog.
September security patch
Last CM sources
Download.
culaponk said:
Failed, Twrp said "insufficient storage"
Click to expand...
Click to collapse
And we have a problem with OpenGapps. Even OpenGapps Pico is to big for our /system partition
So we have 3 solutions:
Use smaller gapps (old opengapps pico builds)
Delete something from /system
Resize system partition in TWRP (link 1, link2)
@Ckpe4 For maguro please... Thanks so much! Finally a marshmallow resurrection remix for the old gnex! Great Job! :good: