LiquidSmooth & Euphoria-OSAll builds are unofficial
GEE users flashing my non-GPROJ ROMs, flash one of the GEE kernels below in the downloads section, after flashing the ROM.
DISCLAMER
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
Please do some research if you have any concerns about features included in this ROM before flashing it!
YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Code:
ABOUT THE ROMS
LIQUIDSMOOTH
LiquidSmooth is an aftermarket firmware based on the Android Open Source Project.
Dedicated to providing users with smooth, stable and fast ROMs. A Lightweight modified AOSP base, and then add the features you crave!
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device.
We ask that you do your part to know your device and know how to recover from problems before you flash!
Click to expand...
Click to collapse
Code:
SOURCE CODE
GPROJ BASED
ROM: https://github.com/LiquidSmooth
KERNEL: https://github.com/CyanogenMod/lge-kernel-gproj
DEVICE: https://github.com/CyanogenMod/android_device_lge_ls970
VENDOR: https://github.com/TheMuppets/proprietary_vendor_lge
DEVICE COMMON: https://github.com/CyanogenMod/android_device_lge_gproj-common
DEVICE COMMON: https://github.com/CyanogenMod/android_device_lge_ls970-common
Click to expand...
Click to collapse
Code:
DOWNLOADS
LIQUIDSMOOTH ROM
LiquidSmooth - Android 5.0.2 - 02/04/15 - AndroidFileHost
LiquidSmooth - Android 5.0.2 - 03/17/15 - AndroidFileHost (GPROJ)
LIQUIDSMOOTH V4.0 (Android 5.0.*)
LiquidSmooth 01/18/15 - AndroidFileHost (GPROJ)
LiquidSmooth 01/29/15 - AndroidFileHost (GPROJ)
EUPHORIA-OS ROM
Euphoria-OS - Android 5.1.1 - 06/10/15 - AndroidFileHost
EUPHORIA-OS ROM V1.1 (Android 5.1.*)
Euphoria-OS 05/18/15 - AndroidFileHost (GPROJ)
GAPPS
Nano Modular Pachage - Android 5.1.*
KERNELS
Here are some other kernels for Gee and Geeb. If you get flashing colors try the other kernel of the same name.
I didn't make these kernels, I found them on other threads for this device. Threads are listed below.
GEE-MAKO
KERNELS - Android 5.1.*
Solid Kernel V1.82
Franco r217.5
Hells-Core b75-L
KERNELS - Android 5.0.*
Solid Kernel V1.61
Jolla AIO Gen2-v2.5 (GUI Aroma Installer - Mod and Non-Mod) [Instructions]
Franco r216
Hells-Core b69
Hells-Doctor FrAndroid 0224
Hells-Doctor Numeriks 0403
Mirage 020515
KERNELS - Android 4.4.*
Solid Kernel V1.5
AK-CM 360
AK-AOSP 360 (Works with this build)
Franco r212
Franco-MOD r212 (Works with this build)
Matr1x V14.2
Matr1x-MOD V14.2(Works with this build)
Jolla AIO Gen2-v1.2 (GUI Aroma Installer - Mod and Non-Mod) [Instructions]
GPROJ
KERNELS - Android 5.1.*
Solid Kernel V1.8.2 (GEE)
Jolla AIO Gen3-v1.2 (GEE)
KERNELS - Android 5.0.*
Solid Kernel V1.61 (GEE)
KERNELS - Android 4.4.*
Solid Kernel V1.5 (GEE)
STOCK
KERNELS - Android 5.0.*
AK 600 (GEE)
Matr1x (GEE)
KERNELS - Android 4.4.*
Solid Kernel V1.82 (GEE)
RECOVERY
TWRP 2.8.6.0
FIXES
SuperSU
Click to expand...
Click to collapse
INSTALLATION
Wipe Data, System, Cache, Dalvik Cache
Flash LiquidSmooth ROM
Flash GApps
Reboot
UPDATING
Nand Backup Using Recovery
Erase Previous Backup (Saves Space)
Flash LiquidSmooth ROM Update
Wipe: Cache, Dalvik
Reboot
Click to expand...
Click to collapse
Code:
THREADS MENTIONED
Gapps 5.0.*
SuperSU
Jolla Kernel
Solid Kernel
Matr1x Kernel
Franco Kernel
TWRP recovery
ViPER4Android Audio Effects
XDA:DevDB Information
LiquidSmooth, ROM for the Sprint LG Optimus G
Contributors
clementinox
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
Version Information
Status: Alpha
Created 2015-01-26
Last Updated 2015-06-14
Reserved
Reserved
I currently do not own this device but will try my best to fix what I can.
Flash and enjoy!
clementinox said:
I currently do not own this device but will try my best to fix what I can.
Flash and enjoy!
Click to expand...
Click to collapse
So you haven't (let it) tested at all?
Kevinjoa said:
So you haven't (let it) tested at all?
Click to expand...
Click to collapse
I have had one person test it. He said all functions of the phone seem to be working except maybe the carrier name was wrong, it said Sprint instead of his carrier where he lives.
Kevinjoa said:
So you haven't (let it) tested at all?
Click to expand...
Click to collapse
clementinox said:
I have had one person test it. He said all functions of the phone seem to be working except maybe the carrier name was wrong, it said Sprint instead of his carrier where he lives.
Click to expand...
Click to collapse
I can't get either of you guys' liquid builds to boot. It keeps looping at the "LIQUIDSMOOTH" With the symbol below the words. It gets past the water pouring, but keeps looping at the second part. I just let it sit for 10 minutes and nothing changed. I didn't flash anything extra, rom only. They both do the same thing. I don't mean to cross threads here since Kevin built one as well. But I figured I would mention it here since you both posted.
Any suggestions either of you?
dopy25 said:
I can't get either of you guys' liquid builds to boot. It keeps looping at the "LIQUIDSMOOTH" With the symbol below the words. It gets past the water pouring, but keeps looping at the second part. I just let it sit for 10 minutes and nothing changed. I didn't flash anything extra, rom only. They both do the same thing. I don't mean to cross threads here since Kevin built one as well. But I figured I would mention it here since you both posted.
Any suggestions either of you?
Click to expand...
Click to collapse
Is this on a clean install? As In TWRP wipe data, dalvik cache, cache and system. DO NOT WIPE INTERNAL STORAGE. Then flash the rom.
I have had one person already test it out and his is using it currently on LS970, boots just fine. You could also try wiping cache and dalvik cache if it loops.
Considering its on both roms Its probably not rom related.
What device do you have exactly?
clementinox said:
Is this on a clean install? As In TWRP wipe data, dalvik cache, cache and system. DO NOT WIPE INTERNAL STORAGE. Then flash the rom.
I have had one person already test it out and his is using it currently on LS970, boots just fine. You could also try wiping cache and dalvik cache if it loops.
Considering its on both roms Its probably not rom related.
What device do you have exactly?
Click to expand...
Click to collapse
I apologize for not being more specific.
1) yes it was an install on a clean partition. I use multiRom and installed it as a secondary rom, which is basically like installing the rom on a virtually clean partition. I have been doing this for awhile and only ran into a few issue. One being stock based roms as secondary. The other issues I have had are ROM or recovery based.
2) I am using an LS970 LG Optimus G from Sprint.
3) the roms I tried and am mentioning here are both LiquidSmooth so it very possibly could be rom (sources) based. I have no issues with Kevins device sources, the same with gproj sources, which I believe you used for the LS970.
I will try to install it again and wipe data, and caches before booting. That may help.
dopy25 said:
I apologize for not being more specific.
1) yes it was an install on a clean partition. I use multiRom and installed it as a secondary rom, which is basically like installing the rom on a virtually clean partition. I have been doing this for awhile and only ran into a few issue. One being stock based roms as secondary. The other issues I have had are ROM or recovery based.
2) I am using an LS970 LG Optimus G from Sprint.
3) the roms I tried and am mentioning here are both LiquidSmooth so it very possibly could be rom (sources) based. I have no issues with Kevins device sources, the same with gproj sources, which I believe you used for the LS970.
I will try to install it again and wipe data, and caches before booting. That may help.
Click to expand...
Click to collapse
Hi there!
I was the one that actually tested the previous build for clementino and I am using it as a daily driver. I used the previous build and am downloading this new build as I type this reply. From what I had read around, using the lollipop build as a secondary doesn't always work.
first boot of LS 4.0 after clean install could take up to 10 - 15 minutes so I would suggest to wait that long as well. I use the Sprint LG Optimus G LS970 as well but I bought it in Indonesia as an unlocked phone and it already has another service provider on it with working data plan. This causes some problems for me at times when changing ROMs because it would sometimes cause me to lose data. Never the less the build is solid.
I assume this new build eliminates the CM theme engine and added RRO. Overall, I'm just excited about this new build.
shindou01 said:
Hi there!
I was the one that actually tested the previous build for clementino and I am using it as a daily driver. I used the previous build and am downloading this new build as I type this reply. From what I had read around, using the lollipop build as a secondary doesn't always work.
first boot of LS 4.0 after clean install could take up to 10 - 15 minutes so I would suggest to wait that long as well. I use the Sprint LG Optimus G LS970 as well but I bought it in Indonesia as an unlocked phone and it already has another service provider on it with working data plan. This causes some problems for me at times when changing ROMs because it would sometimes cause me to lose data. Never the less the build is solid.
I assume this new build eliminates the CM theme engine and added RRO. Overall, I'm just excited about this new build.
Click to expand...
Click to collapse
I have CM12 for LS970 installed as secondary. With the updated TWRP there are no issues on installing Lollipop as primary or secondary. I am not trying to bash. I am trying to install Liquid smooth. I had Kevins Liquid Trex and it was awesome, but now there are newer versions and updates and fixes. Every other LP rom has installed fine. The only other thing I will try is to install as primary. If it works, I can backup, then restore it as secondary.
Also, what do you mean updated? Have you not tried the 01-18 build that is linked in the OP?
dopy25 said:
I have CM12 for LS970 installed as secondary. With the updated TWRP there are no issues on installing Lollipop as primary or secondary. I am not trying to bash. I am trying to install Liquid smooth. I had Kevins Liquid Trex and it was awesome, but now there are newer versions and updates and fixes. Every other LP rom has installed fine. The only other thing I will try is to install as primary. If it works, I can backup, then restore it as secondary.
Also, what do you mean updated? Have you not tried the 01-18 build that is linked in the OP?
Click to expand...
Click to collapse
I'm sorry dopy25, I thought that clementinox has uploaded another build since he already uploaded the new builds he had for geeb. I didn't realize it until the download was completed. The 01-18 build is the one I'm running. But I think he's prepared another build. The only issue I encountered with this build, aside from the mentioned wrong carrier name is that in the lock screen it would show (no sim - Sprint) at the top left corner. Although text and calls work, my data doesn't and I assume it has something to do with my phone not on Sprint (APNs etc).
@dopy25
You need do update multirom TWRP once again, there was fixes for some ROMs which us block based zips, my liquid is working as secondary now and his should also.
Kevinjoa said:
@dopy25
You need do update multirom TWRP once again, there was fixes for some ROMs which us block based zips, my liquid is working as secondary now and his should also.
Click to expand...
Click to collapse
You are absolutely right. After the update I grabbed from your server, I was able to install both Liquid roms as secondary. However, neither have the developer options available. Is there a different way to activate them in Liquid?
Also, @clementinox I have pretty much everything working in your ROM, but it caused my boot loader to freeze at the google loading screen. That was on reboot. It just sat there. So I had to go in recovery and wipe stuff again. So, to everyone else wanting to try this with gproj sources. It does indeed work.
Finally another Lollipop ROM!
Downloading now, if something goes wrong I'll report, thanks! :good:
Download link sends me to 01/18 is that the last build?
FcoEnrique said:
Finally another Lollipop ROM!
Downloading now, if something goes wrong I'll report, thanks! :good:
Download link sends me to 01/18 is that the last build?
Click to expand...
Click to collapse
Yes its the last build, I will be uploading a new version today, haven't had time to build one before now.
clementinox said:
Yes its the last build, I will be uploading a new version today, haven't had time to build one before now.
Click to expand...
Click to collapse
Whoohoo... I knew it... backing up data and preparing to clean flash another build by @clementinox .
LiquidSmooth V4.0 GPROJ ROM Updated!
Announcements
Flash and enjoy! If you like the ROM give a thumbs up!
Changelogs
LiquidSmooth Gerrit
LiquidSmooth Github
As Expected, downloaded and will try out your newest build.
Have you found the cause of the No Sim Card sign on the lockscreen or is it still there? Hopefully with this new update I can set the APN to my carrier's and get working data again! Thanks clementinox! :fingers-crossed:
I love the extra features against other ROMs (like cyanogem) but... I really miss themes, which was a "hell no!" when I found that it is not present in the ROM... And editable QS... So I'll in the meantime...
I Hope to see a build with all that in the future :good:
Related
I have been sharing my CM7/CM9/CM10/CM10.1/CM10.2-based builds for some time in several thread, which culminated in the MackayROM. I continue now with KK4.4 from where I was for JB4.3. MackayROM is based on CyanogenMod sources, with several performance enhancements.
About Cyanogen: CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
Disclaimer: I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
If you run into errors, I may not be able to solve it!
If you know a solution to a problem, either upload it yourself to Gerrit Code Review or contact me through pm.
The ROM is based on Cyanogen sources with the following changes:
-Mackay Kernel:
-Set of cherries picked from gerrit (differing by the day)
-Some additional patches I did myself to the source code
Feature request are OK, but remember:
1. I try to stay close to stock
2. I will not include additional apps, unless they can be build from source
3. The time I spend on features depends on how much I like them myself
Although it is possible to enable ART, this is not advisable:
-Takes long to convert from Dalvik to ART on first boot
-Needs more RAM
-Can cause soft reboots
But off course, YMMV -> light users may have better luck
Changelog of 4.9.14 - 5-Nov-2014
-CM11.0 codebase of 3-Nov-2014
-TWRP updated to 2.8.1.0
Full changelog of 4.9.14 compared to stock CM11.0:
CM11.0 sources of 3-Nov-2014
Mackay kernel:
Separate kernel thread: http://forum.xda-developers.com/showthread.php?t=2532813
TWRP (2.8.1.0):
-Themed orange
-Run recovery-apps (zip files should be present in /system/mackay, launch them through advanced->run app)
Removed apps:
-VideoEditor & demo VideoFiles
vendor/cm:
-Adapt for custom MackayROM building (bootanimation, ROM&file name)
-Custom bootanimation (Thanks to Malcho)
vendor/samsung:
-Added scripts for Mackay Settings
hardware/samsung:
-F4k 720p patch for bigmem kernels
AriesParts (“Mackay Settings” in Settings menu):
Add mackay kernel settings options:
>WiFi PM mode selection
>BLX settings
>BLN activation
>Navbar selection
>Low RAM mode selection
For other projects (frameworks/base & Settings, check my github for the latest patches)
Coming from stock Samsung ROM/CM7:
-The safest way is to flash CM9 first and then flash Mackay ROM. Going directly from Samsung ROM/CM7 to Mackay ROM may lead to loosing IMEI.
Fresh install:
Can be flashed on top of any CyanogenMod build:
-Do a factory reset
-Flash ROM
-Flash gapps
-Reboot your phone
Update:
-Flash ROM
-Reboot your phone
(no wipes or other things needed, just flash & reboot)
-Custom kernels can be used only if specific for KK4.4
Credits:
-teamhacksung/pawitp for making CyanogenMod work on our ancient phone
-stratosk/DerTeufel/Mialwe for the inspiration I got from their kernels
-rootax for providing a high-speed server for high quality downloads
-Malcho for his kernel splash & bootanimation
Downloads:
Basketbuild
Google Apps
Nano Gapps
For those who want to theme it even further, Bejda made a Mackay splash screen!
http://forum.xda-developers.com/showthread.php?t=2214468
To download the same kernel, but then with voodoo colour, or with CWM:
Basketbuild
XDA:DevDB Information
[KK 4.4.4][ROM]Mackay ROM, ROM for the Samsung Galaxy S I9000
Contributors
kasper_h
ROM Kernel: Linux 3.0.x
Based On: CyanogenMod
Version Information
Status: Beta
Created 2013-11-16
Last Updated 2014-09-21
Reserved
10 seconds after posting this thread I notice something went wrong with the uploads. Please have a bit of patience, the links will be updated ASAP.
kasper_h said:
10 seconds after posting this thread I notice something went wrong with the uploads. Please have a bit of patience, the links will be updated ASAP.
Click to expand...
Click to collapse
Ok, Thansk for the rom. I will instal today. In it there is CWM or TWRP?
marcinowozniako said:
Ok, Thansk for the rom. I will instal today. In it there is CWM or TWRP?
Click to expand...
Click to collapse
Kernel is TWRP-only at the moment.
Download link on XDA fileserver has been restored. Download link on rootaxbox will take quite a bit more time, needs a full re-upload & uploadspeed is very slow ATM.
Oh.
When will Galaxy Vibrant get this, same device, but still, no 4.4 ROM
Good job
Galaxy3HELL said:
When will Galaxy Vibrant get this, same device, but still, no 4.4 ROM
Good job
Click to expand...
Click to collapse
I think this will come soon, but I won't work on that
kasper, you compiled cm11 by yourself or you got the sources from cm, because there is no cm11 build in get.cm site yet
limnaln said:
kasper, you compiled cm11 by yourself or you got the sources from cm, because there is no cm11 build in get.cm site yet
Click to expand...
Click to collapse
I always build these ROMs myself from CM sources + my own additions to CM sources, so no need for "official" CM11 builds to enable my own ROMs to be build.
kasper_h said:
I think this will come soon, but I won't work on that
Click to expand...
Click to collapse
Can I install your kernel on CM11?
marcinowozniako said:
Can I install your kernel on CM11?
Click to expand...
Click to collapse
I have no separetely flashable kernel yet...
this is awesome... was waiting for this.... one quick question though... can we use officail paranoid android gapps with this rom?
rajeshbabushrestha said:
this is awesome... was waiting for this.... one quick question though... can we use officail paranoid android gapps with this rom?
Click to expand...
Click to collapse
Yes, in principle every gapps KK4.4 package should work. However, I only tested the package which I linked in OP.
thank you for this:good:
kasper_h said:
Yes, in principle every gapps KK4.4 package should work. However, I only tested the package which I linked in OP.
Click to expand...
Click to collapse
Thanks for KK rom :good: :good:
OP's link to Gapps contains five different builds- some with ART compatibility. Is there a preferred one? ART works/tested, or better stick to delvik for a little while?
A few things I noticed:
- If I select Performance settings from Mackay app, Settings force closes.
- Orientation tile is buggy, sometimes it seems to work, sometimes not.
The ROM is very snappy, thank you very much for your work!
Kasper_h installed this rom and I have a bug. When I want to enable high-speed data connections settings crashes me the error: com.android.systemui and closing forces. Framework to overloads.
Thanks for the rom, There isnt any bug list?
Installed on CM11 and works fine.No forced closure and fast enough to be a test.
so no separate kernel 0.600
This is an unofficial build of Omni Rom based on KitKit 4.4.2. There is no official support for the d2 variants. Props to androidsftw for picking apart what was needed for our d2s.
I am not the dev of this rom, all I did was add in necessary device/vendor/d2 files for d2. This is not a port, everything has been built from source.
As with all things root, I am not responsible for anything that happens while flashing this rom. You take responsibility for your actions. Nandroid is your friend.
----------------------------------
Downloads:
Omni Rom for the D2LTE - Droidhype Roms
GAPPS 4.4.2 - PA 0-Day
SuperSU - Chainfire
Kernel (optional) - BMS
----------------------------------
Installing for the first time? Grab the newest full zip from the D2LTE directory. For future updates, just go to Settings -> System Updates and let the magic happen.
HOW TO INSTALL
1. Factory Data reset
2. Wipe System/Data/Dalvik/Cache
3. Install ROM zip from Sdcard
4. Install GAPPS zip from Sdcard
5. Install SuperSU from Sdcard
6. Reboot to home screen to confirm good flash
7. (Optional) Reboot to recovery and flash kernel
TO USE DELTAS, YOU HAVE TO USE TWRP OR PHILZ RECOVERY. CWM WILL NOT WORK BECAUSE IT DISABLES SCRIPTING CAPABILITIES BY DEFAULT. If there's anything that you want the updater to flash automatically after it flashes your update, put the file(s) in the FlashAfterUpdate directory inside your Opendelta folder in your internal storage.
Join the BMS G+ community which will have quicker release info in the future for all things BMS and roms.
Enjoy!
Cherry-picks:
- Multi-window
This build is unofficial, so I don't exactly carry around a changelog. However, you can always check cmxlog for omni and see what's been changed with each version of one of their nightlies. It won't be exact as some have specific device merges, but it will give you a good idea. The dates on my builds will correspond with the officials listed on cmxlog.
You can also check their gerrit or git to see what's been merged.
This question gets posted pretty frequently so if some users could please bookmark this post, we can just repost it when needed. Here are all the links you can peruse for your changelog/update enjoyment.
cmxlog - http://omni.cmxlog.com/4.4/
gerrit - https://gerrit.omnirom.org/#/q/status:merged,n,z
github - https://github.com/omnirom/
G+ - https://plus.google.com/u/0/communities/102450203113748251717
XDA - http://forum.xda-developers.com/omni
XDA:DevDB Information
Omni Rom for the d2tmo, a ROM for the T-Mobile Samsung Galaxy S III
Contributors
GideonX
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: Omni
Version Information
Status: Beta
Created 2014-02-18
Last Updated 2014-02-18
Reserved
FIRST!
Thanks, Will try!
2nd haha anyways will give this a try when i get home c:
Sent from my SGH-T999 using xda app-developers app
Hell yes finally, thanks for this for sure
Sent from my SGH-T999 using Tapatalk
So what I'm getting is that a d2lte build will work on all d2 variants, no updater-script editing required?
Screenies??
As GideonX has said, these builds support all the d2 variants. Everything is automatically done during flashing. You don't need to do anything but flash like normal
downloaded and working
Except for su recconising apps. have tried manual install also just can't seem to make it work. appreciate this rom otherwise. will keep trying. thanks:good:
Is anyone having problems with swipe typing?
trofmoc said:
Except for su recconising apps. have tried manual install also just can't seem to make it work. appreciate this rom otherwise. will keep trying. thanks:good:
Click to expand...
Click to collapse
4.4 needs special twrp jyst in case you restored back on to tw or never updated.
Anyways seems like the rom had little to offer in my personal opinion. I decided to just go an restore previous rom instead
Sent from my SGH-T999 using xda app-developers app
I just installed the Rom! Working great! Thank you.
Wp4Wp4:good:
twrex82 said:
Is anyone having problems with swipe typing?
Click to expand...
Click to collapse
Try PA's gapps. If you're talking about how no letters actually get inputted on the screen even though it is showing the swipe, then that's what you need.
http://forum.xda-developers.com/showthread.php?t=2397942
New D2LTE 2014-02-21 Build - http://goo.gl/zJwFzA
- Had some opendelta issues. Please flash this entire zip this time around, thanks.
- Screen rotation is in settings now.
where are the screen shots for this rom?
Thank you for this rom and one quick question, can't Sync facebook contacts info anymore on the last build?
"Envoyé depuis mon SGH-T999 avec Tapatalk"
Can someone on tmobile verify uploading pictures and video works with this rom in instagram? it may be a kitkat issue with instagram but previously I have gotten a lot of freezes, FC, and reboots while trying to upload video. anybody willing to test this on the latest release?
Dude sorry but are u spamming the threads with the same question?
Sent from my SGH-T999 using xda app-developers app
Anyone have OpenDelta mess up their phone? Every time I booted into recovery it would install the update. Then lost root and my gapps. It was hell trying to get it all back.
Purplezigar said:
Anyone have OpenDelta mess up their phone? Every time I booted into recovery it would install the update. Then lost root and my gapps. It was hell trying to get it all back.
Click to expand...
Click to collapse
I'm using Philz recovery, opendelta updates work as expected. What's your setup?
Hello Everyone!!
So here is a new ROM I compiled yesterday, it does have a lot of features and it is called SONIC OPEN KANG PROJECT
I didn't open a new thread for it because I'm not gonna be updating it unless many users encourage me to do so...
Anyway I thought I should share it with you guys, for who ever wanna test it
Here is this ROM's features:
http://sonic-developers.com/?page_id=160
Also here is a quick review for the ROM:
And for more info visit their website:
http://sonic-developers.com
Download Link:
I've started uploading my files to androidfilehost.com , hoping you like it more than Dev-host
SOKP-MS-04-KK444-KTU84Q-20140726-amami.zip
Here are my screenhots as well:
Hello Guys,
Since our lovely Z1C is relatively new, it doesn't have many CM based ROMs, so I thought why not porting some
from the closest phone to ours (which is obviously Xperia Z1).
So I'll be presenting five ports for five ROMs as mentioned in the title, but I'm gonna start with a simple guide for how to port the ROM yourselves
All you have to do to port a CM11 based ROM from Z1 is:
Download the Z1 ROM and extract it wherever you want
Open META-INF\com\google\android\updater-script with any text editor and remove first five lines (assert)
Download This for old builds, and This for new builds, then unzip it
Copy and replace "boot.img" from the previous zip to your Z1 ROM
Copy and replace "modules" folder to system\lib\modules in your Z1 ROM
Open system/build.prop with any text editor and change this value:
Code:
# Graphics
ro.sf.lcd_density=480
to become:
Code:
# Graphics
ro.sf.lcd_density=320
that is it, although there are optional things you may do before compressing the ported ROM:
In system/build.prop search for honami and replace them with amami
And then search for C6903 and replace them with D5503
Also you may wonna add "Compact" here:
ro.product.model=Xperia Z1 Compact
Click to expand...
Click to collapse
You may also open META-INF\com\android\metadata and do the same replaces
Resign the ROM.zip after compressing it
Important Notes:
DO THIS ON YOUR OWN RISK
You must be running KK ROM before flashing these ROMs down below
This method won't work on Slimkat, although you can grab it from Here
All bugs in these ROMs are related to the original ROM not issues caused by posting
Fell free to report any bugs you face though, and I'll enlist them in known issues
PacMan ROM and MoKee ROM are officially supported, so there is no need to port them
Instructions for all ROMs down below:
Copy the zip to your device
Reboot into recovery
Backup of your system (optional)
Do a factory reset and format [/system]
Flash the Zip
XenonHD & BeanStalk
:::The XenonHD ROM:::
This was built in (2014-04-02) [Build 5]
It contains CM11 FXP312 Kernel
Zip is resigned
Screenshots:
Download link:
update-XenonHD-04-02-14-signed-amami.zip - 238.44 MB
New build's port can be found here: (Not tested by me)
http://forum.xda-developers.com/showthread.php?p=53365536
For more info and screenshots, visit the Original Thread
:::The BeanStalk ROM:::
This was built in (2014-03-11) [Build 3]
It contains It contains CM11 FXP312 Kernel
It has random reboot bug
Zip is resigned
Screenshots:
Download link:
BeanStalk-4.4.255-20140311-amami.zip - 251.39 MB
For more info and screenshots, visit the Original Thread
:::Gapps:::
GApps Standard 4.4.2 (10/5)
Removes AOSP Camera and AOSP Gallery and Replaces it with the Google variants
Removes AOSP Launcher2/Launcher 3 and CM Trebuchet and Replaces it with Google Now Launcher
Adds Google Search aka Google Now
All necessary syncing apks and libs
GApps Minimal 4.4.2 (10/5)
~20 MB
Playstore
Syncing apks and libs, etc.
Google Camera 4.4.2 (16/1)
Automatically removes AOSP Camera/Gallery and adds Google Camera/Gallery
FaceLock 4.4.2 (10/5)
Adds Face unlock
GenieWidget 4.4.2 (10/5)
Adds stock news and weather widget
AOSP Calendar Sync 4.4.2 (16/1)
Adds syncing ability for AOSP Calendar (not in Core or Standard packages)
AOSP Browser Sync 4.4.2 (16/1)
Adds syncing ability for AOSP Browser (not in Core or Standard packages)
This was copied and pasted from Original Thread (you can find more Gapps mirrors here)
Personally I prefer [and have tested] the minimal Gapps package, it is the best
Great work!
I wonder if you would do Slimrom also, it is a mainstream ROM with many innovations that other ROMs have copied.
[edit] Duh I just read your comment about slimkat. That'll learn me to read OPs properly...
wow, this looks good, i think ill try MoKee, just one question, is everything working ?
Just flash rom and some gapps ?
juried said:
Great work!
I wonder if you would do Slimrom also, it is a mainstream ROM with many innovations that other ROMs have copied.
[edit] Duh I just read your comment about slimkat. That'll learn me to read OPs properly...
Click to expand...
Click to collapse
actually, just today; @akshaybz has opened a thread for slimkat (not ported, compiled) here:
[ROM][4.4.2][KOT49H] SlimKat - Amami [Build 4][Alpha][UNOFFICIAL]
Enjoy
xhizors said:
wow, this looks good, i think ill try MoKee, just one question, is everything working ?
Just flash rom and some gapps ?
Click to expand...
Click to collapse
Well I didn't test everything, but the ROM was flawless, wifi is OK
Yes just flash rom and some gapps, try it and give a nice feedback
Might be a dumb question, but will updating them through the rom settings mess anything up?
RevokOne said:
Might be a dumb question, but will updating them through the rom settings mess anything up?
Click to expand...
Click to collapse
I don't expect updates to appear in the ROM's settings, but if they do,
yes updating that way should mess up a lot, it should make a bootloop.
anyway if you see an update for the ROM you're using, just tell me and I'll port the new release right away
omarainea said:
I don't expect updates to appear in the ROM's settings, but if they do,
yes updating that way should mess up a lot, it should make a bootloop.
anyway if you see an update for the ROM you're using, just tell me and I'll port the new release right away
Click to expand...
Click to collapse
I been building ROMs on linux trying and testing build from source..Im new to it and the device has been a long time HTC user. So guess all are from Z1 with afew changes you posted similar to the stock port way. I built a few roms so apart from the one I'm supporting. Carbon and PAC ROM has shown
Sent from my Xperia Z1 Compact using Tapatalk
Thread Updated
Ported MoKee 2014-03-31 Release
Ported Carbon 2014-04-01 (Build 2)
Also updated kernel in OP and in these two builds to 3.4.0 CM11 gb37510f From FXP313
I think I'll be updating the thread every week from now on, until these ROMs get a compiled version
Enjoy
How are the cameras qualities on these roms?
---
Sendt fra LG G Pad
slonn said:
How are the cameras qualities on these roms?
---
Sendt fra LG G Pad
Click to expand...
Click to collapse
Exactly like in CM11.0
omarainea said:
Exactly like in CM11.0
Click to expand...
Click to collapse
And how exactly is the quality in CM11, I can't seem to find a definitive answer in either CM thread?
Any updates on the roms btw?
Cheers! :good:
Thread Updated
e2zippo said:
And how exactly is the quality in CM11, I can't seem to find a definitive answer in either CM thread?
Click to expand...
Click to collapse
I don't know how to describe its quality, I think the best way to know is by trying
e2zippo said:
Any updates on the roms btw?
Click to expand...
Click to collapse
Yeah it's been a week, so here are the Updates of this week:
Updated Carbon ROM to build 4 (2014-04-09)
Updated MoKee ROM to build 2014-04-04 (its kernel was updated to FXP314)
Added XenonHD ROM latest release build 5 [2014-04-02] (download link in second post)
it is very customizable (can't describe it enough)
you can check more info about it in its main thread
about the kernel update, it seems like FXP team have messed up thier kernel a little
so when I tried it on Carbon and XenonHD I got some sort of bootloop,
but it worked fine on MoKee, so MoKee is the only ROM that has FXP314 kernel,
I don't recommended anyone to use it for porting so I didn't upload it
omarainea said:
about the kernel update, it seems like FXP team have messed up thier kernel a little
so when I tried it on Carbon and XenonHD I got some sort of bootloop,
but it worked fine on MoKee, so MoKee is the only ROM that has FXP314 kernel,
I don't recommended anyone to use it for porting so I didn't upload it
Click to expand...
Click to collapse
Actually the problem is not much with the latest kernel, but rather with the ROMs:
Recently there was a huge changeset merged in CM tree, among other things it took in kernel a lot of CAF code\blobs from 4.4 Sony sources, and Xperia CM ROM was rebased on this CAF kernel.
It means, that the ROMs based on CM must be rebuild using latest sources, otherwise they'll have a bootloop with the new CAF kernel =)
TheQwertiest said:
Actually the problem is not much with the latest kernel, but rather with the ROMs:
Recently there was a huge changeset merged in CM tree, among other things it took in kernel a lot of CAF code\blobs from 4.4 Sony sources, and Xperia CM ROM was rebased on this CAF kernel.
It means, that the ROMs based on CM must be rebuild using latest sources, otherwise they'll have a bootloop with the new CAF kernel =)
Click to expand...
Click to collapse
Huh, Thanks for the info bro,
seems like I should read more very now and then to know this kind of stuff.
Thread Updated
Added Paranoid Android ROM
This was built in (2014-04-15)
It contains CM11 20140410-Nightly kernel
Updated MoKee ROM
This was built in (2014-04-14)
The ROM was deodexed (original ROM was odexed)
It contains CM11 20140410-Nightly kernel
hi, should i have a unlock bootloader for test this roms? i can´t unlock it
canteo said:
hi, should i have a unlock bootloader for test this roms? i can´t unlock it
Click to expand...
Click to collapse
unfortunately yes, if you want to flash a custom kernel, you have to have an unlocked bootloader (and that is required to flash custom ROM)
Hello! I'll be posting pure AOSP builds whenever there are new versions of android released (providing I have the time).
If you choose to use these builds, please ensure you have unlocked your bootloader and have custom recovery installed. I have also noticed that TWRP seems a little wonky at this point, so in order for me to flash it correctly, I had to wipe, then restart recovery, then flash. Hope that's not the case for everyone else.
3/18/15
Added ability to change DPI.
3/15/15
No longer messes with recovery at all. Bluetooth working, data does not force encrypt.
3/13/15
Android 5.1.0_r1 (LMY47D)
This release will wipe your recovery. If anyone needs this changed let me know and I will build another.
1/3/2015
Android 5.0.2_r1 (LRX22G)
Data is now encryptable, meaning your unencrypted data should stick going forward.
Included my own build of stock kernel with Linaro 4.9.3 toolchain.
Fixed bluetooth (thanks Lollipopalooza/Craig)
No longer need to re-flash recovery.
12/6/2014
Android 5.0.1_r1 (LRX22C)
You will need to install separate gapps
You will need to re-flash your custom recovery after you install (you all let me know if I should change this or not, I think I will on future builds)
I am not responsible for anything that happens to your device or to you, yourself while flashing this.
Latest DL Links will be in post #2.
XDA:DevDB Information
Pure AOSP Flounder, ROM for the Nexus 9
Contributors
gchild320
ROM OS Version: 5.0.x Lollipop
Based On: AOSP
Version Information
Status: Stable
Created 2014-12-06
Last Updated 2015-01-03
Downloads
3/18/15
https://www.androidfilehost.com/?fid=95916177934543409
3/15/15
https://www.androidfilehost.com/?fid=95916177934541983
3/13/15
5.1 - https://www.androidfilehost.com/?fid=95916177934540786
1/3/14
Flounder Android 5.0.2_r1 build LRX22G https://www.androidfilehost.com/?fid=95864024717074545
Future FAQ if necessary (let's hope not).
Thank you!!!!
Will test it tomorow
I hope cm12 will build on arm64 soon
Just a few questions. What gapps do you recommend? What twrp ? There is the mainline version and the one @USBhost did. Thanks for the ROM!! Really appreciate seeing this show up.
mpmilestogo said:
Just a few questions. What gapps do you recommend? What twrp ? There is the mainline version and the one @USBhost did. Thanks for the ROM!! Really appreciate seeing this show up.
Click to expand...
Click to collapse
I didn't realize that there were two versions of twrp...I used the one from twrp website.
gchild320 said:
I didn't realize that there were two versions of twrp...I used the one from twrp website.
Click to expand...
Click to collapse
Yep
https://s.basketbuild.com/devs/USBhost/Nexus 9/recovery
I fixed some things
in it
Factory reset will not encrypt data
fixed the device name
look bit better
custom built FIRE-ICE kernel for recovery
USBhost said:
Yep
https://s.basketbuild.com/devs/USBhost/Nexus 9/recovery
I fixed some things
in it
Factory reset will not encrypt data
fixed the device name
look bit better
custom built FIRE-ICE kernel for recovery
Click to expand...
Click to collapse
Hell yes checking this out tomorrow.
build
Awesome !!!! Been waiting for this. How did u build? Last week since their are little options for roms decided to build one on my own and i did a repo sync to Google source but when i did lunch flounder wasn't listed in the build options ?
Flounder still isn't listed just lunch it anyway
Made a video running the ROM. Works very well!!
https://www.youtube.com/watch?v=kVQW-PMepn0
Hello,
can anyone provide a minimal gapps pack? I would like to avoid too much bloatware
http://fitsnugly.euroskank.com/?rom=banks&device=gapps
This maybe what you are looking for.
Hiro Nakamura said:
Hello,
can anyone provide a minimal gapps pack? I would like to avoid too much bloatware
Click to expand...
Click to collapse
belair56 said:
http://fitsnugly.euroskank.com/?rom=banks&device=gapps
This maybe what you are looking for.
Click to expand...
Click to collapse
Well i don't think it's 64bit version or is it ?
Hiro Nakamura said:
Well i don't think it's 64bit version or is it ?
Click to expand...
Click to collapse
From what I understand the apps themselves need to be optimized for 64 internally. These are all Google apps so they are if Google did so. As you update from the play store you don't choose if you're running 64bit or not.
As always I can be wrong.
Hiro Nakamura said:
Well i don't think it's 64bit version or is it ?
Click to expand...
Click to collapse
This is actually a great question.
Adaptive brightness doesn't work. Other than that everything seems to be working.
Edit: Okay so I used an app to look at which sensors were working and which ones weren't... The proximity sensor is not working at all.
omvir said:
Adaptive brightness doesn't work. Other than that everything seems to be working.
Edit: Okay so I used an app to look at which sensors were working and which ones weren't... The proximity sensor is not working at all.
Click to expand...
Click to collapse
Adaptive brightness is working flawlessly. Maybe you had a bad download or flash.
gchild320 said:
Flounder still isn't listed just lunch it anyway
Click to expand...
Click to collapse
I use USBhost's version of TWRP. I tried to flash the rom following directions in OP. It wouldn't flash. First it said for flounder and this device is flounder. Also said something about updater binary. I got this with the other rom also. I tried un-mounting and mounting system, but I still got the error messages. Any ideas?
jlokos said:
I use USBhost's version of TWRP. I tried to flash the rom following directions in OP. It wouldn't flash. First it said for flounder and this device is flounder. Also said something about updater binary. I got this with the other rom also. I tried un-mounting and mounting system, but I still got the error messages. Any ideas?
Click to expand...
Click to collapse
I manually changed it to work with official twrp... Not sure why twrp is calling it volantis instead of flounder but that's why. Also, to get anything to flash in twrp at the moment, I have to reboot recovery after wiping. Hope this helps.
LineageOS is a free, community built, aftermarket firmware distribution of Android 7.1 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Important information:
This thread is for official LineageOS 14.1 builds for LG G4 . The following will not be supported here:
Custom kernels
Mods
Xposed
We don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
Flashed a custom kernel
Installed or did mods from untrusted sources
Modified system files
Known bugs:
Video Recording
Installation:
First time flashing LineageOS 14.1 on your device, or coming from another ROM?
Download the zip(s)
Install a compatible Recovery
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash LineageOS
Optional: Install the Google Apps addon package, install the SU addon package(https://download.lineageos.org/extras, choose arm64)
Reboot
Download:
h815: https://download.lineageos.org/h815
h811: https://download.lineageos.org/h811
personnal nightlies http://host.erwanleboucher.fr/
XDA:DevDB Information
CM 14 on LG G4, ROM for the LG G4
Contributors
genesixxbf3, codeworkx
Source Code: http://github.com/CyanogenMod
ROM OS Version: 7.x Nougat
ROM Firmware Required: V20A Bootloader and modem
Version Information
Status: Beta
Created 2016-10-10
Last Updated 2018-01-28
Reserved
What's working.
everything except what's not working.
What's not working ?
encryption (who use that )
f2fs (who use that too )
QHD video recording
official = signed
unofficial = no signed
to go to unofficial to official flash experimental first (and boot it)
Reserved
If you don't have a sim card detected try that
Code:
adb root
adb shell rm /data/user_de/0/com.android.providers.telephony/databases/telephony.db
adb shell rm /data/user_de/0/com.android.providers.telephony/databases/mmssms.db
adb reboot
Nice job mate! Thank you!
Everythink work ??? no bug ? no issues ? theme engine work ?
yes i know Nougat is too Young for Stable custom Rom at this moment but hope
What doesn't work? if you dont mind me asking?
Awesome work, thanks Genesixx
If there are known issues I am sure the OP will update the first post. You can also flash it and post if you find anything, just don't forget to make a full backup first ????
How is the camera on this build?
Op says you should flash gapps 6.0, is this right?
ashensii said:
Op says you should flash gapps 6.0, is this right?
Click to expand...
Click to collapse
7.0 gapps
to see what's not workin check second post
wow excellent work!
Is this stable enough to use as a daily driver?
ceanth said:
wow excellent work!
Is this stable enough to use as a daily driver?
Click to expand...
Click to collapse
It is
Was running the 10-05 build for several days. I find it works just as good as CM13, possibly better (smoother/faster). Bugs are very minimal, features are too but overall this is a very stable and solid build so far!
THANK YOU @genesixxbf3 for bringing this to us! I don't really like CM13, but 14, something about it is very nice (coming from someone that prefers stock over aosp).
EDIT: It should be posted that H811 users need to be on 20o FW before flashing this, to make sure they get best experience (if you want sound/camera working).
EDIT2: Oh and now there is a thread for me to report: Zooming with standard gallery hot-reboots the phone.
theslam08 said:
It is
Was running the 10-05 build for several days. I find it works just as good as CM13, possibly better (smoother/faster). Bugs are very minimal, features are too but overall this is a very stable and solid build so far!
THANK YOU @genesixxbf3 for bringing this to us! I don't really like CM13, but 14, something about it is very nice (coming from someone that prefers stock over aosp).
EDIT: It should be posted that H811 users need to be on 20o FW before flashing this, to make sure they get best experience (if you want sound/camera working).
Click to expand...
Click to collapse
thanks, i might flash it tonight then. Should 815 users also be on stock rom before flashing this? I am currently on v20d stock rom
ceanth said:
thanks, i might flash it tonight then. Should 815 users also be on stock rom before flashing this? I am currently on v20d stock rom
Click to expand...
Click to collapse
Unfortunately I am not sure about the h815. With the h811 we had a recent issue where we had to be on the latest FW for it to fully work.
I would 'assume' it would be the same for you. May wish to wait for 815 users to report back which FW they're on and how it all works for them.
(and you don't have to actually be running the stock ROM before flashing this, the firmware is a once-flash-always-flashed type situation; firmware is not ROM based it stays between ROMs)
ceanth said:
thanks, i might flash it tonight then. Should 815 users also be on stock rom before flashing this? I am currently on v20d stock rom
Click to expand...
Click to collapse
v20A or newer. So you are fine. Before flashing you don't care what rom you are on. You just need to wipe system , data , cache and dalvik cache and flash whatever you like.
kessaras said:
v20A or newer. So you are fine. Before flashing you don't care what rom you are on. You just need to wipe system , data , cache and dalvik cache and flash whatever you like.
Click to expand...
Click to collapse
ok great.
I'll give it a go and report back with feedback to the group
ceanth said:
ok great.
I'll give it a go and report back with feedback to the group
Click to expand...
Click to collapse
(out of subject)
I wonder how do you live with the stock rom on G4
You charge the phone 2 times per day ? haha
The stock rom has issues and it doesn't let the phone get into doze.
Have fun flashing you will never wanna go back to stock again
kessaras said:
(out of subject)
I wonder how do you live with the stock rom on G4
You charge the phone 2 times per day ? haha
The stock rom has issues and it doesn't let the phone get into doze.
Have fun flashing you will never wanna go back to stock again
Click to expand...
Click to collapse
Haha. I flashed stock rom because I wanted to use Android Pay. There is a deal on in the UK where by you get free London Underground travel on Mondays throughout October.
I was planning on flashing something else after the offer is done but Android Pay failed to work this morning causing a massive queue behind me I have had enough of it!
ceanth said:
Haha. I flashed stock rom because I wanted to use Android Pay. There is a deal on in the UK where by you get free London Underground travel on Mondays throughout October.
I was planning on flashing something else after the offer is done but Android Pay failed to work this morning causing a massive queue behind me I have had enough of it!
Click to expand...
Click to collapse
Hmmm. I don't use android pay but I read somewhere that you can use it with cm 14 or 13 if you use an official and stable build , not nightly or unofficial , and disable superuser in developer settings.
Of course I don't know if that's true