Bricked htc one m9 (urgent help!!) - One (M9) Q&A, Help & Troubleshooting

Hi guys. I just bricked my HTC one m9. I was trying to get it back to stock while I had a custom rom, and I set s-on back to true and locked the bootloader..
Fastboot DOES work.
I cannot enter the custom recovery mode, it says that it failed to boot to recovery.
I cannot boot into my custom rom.
I DO have an SD card. I tried to flash the RUU "0PJAIMG.zip", but it said "failed to flash downloadzip" and didn't flash..
What should I do at this point? I don't want $700 down the drain

1) What is your CID?
2) you flash RUU via SDcard?
3) If you ever got your phone back to normal. DO NOT ATTEMPT TO TURN S-OFF BACK TO TRUE, AND LOCKED YOUR BOOTLOADER. BECAUSE ITS NOT NEEDED AT ALL.

I tried to flash an RUU via SD card, but it gave me that error posted above.
My CID is 11111111

OfficialBlox said:
I tried to flash an RUU via SD card, but it gave me that error posted above.
My CID is 11111111
Click to expand...
Click to collapse
What's your actual firmware version? (The one that is stated in Download Mode in the line with "OS" at the beginning?)

once i auto-bricked my phone, ereasing everuthing with twrp, everything......i did enter into bootloader i guess or download mode (dont remeber very well) and with cid BS_US001 i did flash a Ruu-Zip for developer 2.8 and the after that i could restore everything....hopefully yoiu can do the same

Flippy498 said:
What's your actual firmware version? (The one that is stated in Download Mode in the line with "OS" at the beginning?)
Click to expand...
Click to collapse
My OS is 2-8.617.4

OfficialBlox said:
My OS is 2-8.617.4
Click to expand...
Click to collapse
This might be the RUU you need. (2.11.617.15) Its a newer version of 2.8.617.4
Credits clsA

xunus said:
This might be the RUU you need. (2.11.617.15) Its a newer version of 2.8.617.4
Credits clsA
Click to expand...
Click to collapse
Thanks. So does it matter if I am s-on and locked bootloader?
Also, I have an SD card so that's good.

OfficialBlox said:
Thanks. So does it matter if I am s-on and locked bootloader?
Also, I have an SD card so that's good.
Click to expand...
Click to collapse
Because this is a official RUU for the .617. Which matches your OS version. I can only hope it works since you are S-ON and LOCKED

xunus said:
Because this is a official RUU for the .617. Which matches your OS version. I can only hope it works since you are S-ON and LOCKED
Click to expand...
Click to collapse
Okay, I'm currently downloading the file. Let's hope it works. thanks.

OfficialBlox said:
Thanks. So does it matter if I am s-on and locked bootloader?
Also, I have an SD card so that's good.
Click to expand...
Click to collapse
If you're using the SD Card method it doesn't matter at all whether your bootloader is locked or not. And as long as the RUU is the same version as your actual firmware (or if the RUU is newer) it doesn't matter whether your phone is S-ON or S-OFF.
The SD card has to be formated to fat32 and mustn't be bigger than 32gb. Copy the RUU to the main directory of the card and rename it to "0PJAIMG.zip" (that's a zero not an O). If you then put the card back into your phone and reboot to download mode you just have to follow the instructions on the phone's screen.

Let's say I were to flash the wrong firmware version RUU (which I did, and the installation failed), would it say something like "failed to flash zip downloadzip", because that's what it said.

OfficialBlox said:
Let's say I were to flash the wrong firmware version RUU (which I did, and the installation failed), would it say something like "failed to flash zip downloadzip", because that's what it said.
Click to expand...
Click to collapse
Which method did you use? If you used the SD Card method: Are file extensions visible on your pc? If not the file may be named "0PJAIMG.zip.zip" now...

I used the SD card method, but the firmware version was wrong. I just want to know if it would stop me with an error, instead of actually installing the RUU.

OfficialBlox said:
I used the SD card method, but the firmware version was wrong. I just want to know if it would stop me with an error, instead of actually installing the RUU.
Click to expand...
Click to collapse
Since you're S-ON you can't harm your phone with a "wrong" RUU. If it's incompatible it simply won't flash.
Edit with some alternative solutions: There is a RUU.exe for your specific firmware on ir-file. But you need to pay if you want to download there. (At least if there is no xda member who already has an account and is willing to help.) Or you try this RUU Service. But that one isn't for free, either.

OfficialBlox said:
Okay, I'm currently downloading the file. Let's hope it works. thanks.
Click to expand...
Click to collapse
Ohh my, locked and Son...May the force be with you...always.
I do believe the only option would be to download a Ruu-EXE from HTC Developers and run it from PC, also phone must connected in download mode or recovery, hopefully you do it for good.................
OR.....................................MAKE USE OF THE UH-OH GUARANTEE, step the phone under the water for 20 mins or crush the screen and take it to your vendor, they should replace phone with no questions for one completly new as guarantee states!!!!!
In Mexico, Telcel they do Honor this special guarantee

LLegion said:
Ohh my, locked and Son...May the force be with you...always.
I do believe the only option would be to download a Ruu-EXE from HTC Developers and run it from PC, also phone must connected in download mode or recovery, hopefully you do it for good.................
OR.....................................MAKE USE OF THE UH-OH GUARANTEE, step the phone under the water for 20 mins or crush the screen and take it to your vendor, they should replace phone with no questions for one completly new as guarantee states!!!!!
In Mexico, Telcel they do Honor this special guarantee
Click to expand...
Click to collapse
So the RUU.zip that someone linked me won't work? I just spent hours downloading it lol

OfficialBlox said:
So the RUU.zip that someone linked me won't work? I just spent hours downloading it lol
Click to expand...
Click to collapse
I could be wrong but I would say it should work. I don't see a reason why it shouldn't.

OfficialBlox said:
So the RUU.zip that someone linked me won't work? I just spent hours downloading it lol
Click to expand...
Click to collapse
If you met all the conditions listed by @Flippy498 in post #11 it will work just fine
also the newest Developer Edition RUU can be found here direct from HTC >> http://www.htc.com/us/support/htc-one-m9/news/

Related

Dev version to Tmobile US version

Odd question but I have the Developer edition. I use it on T-mobile and just out of curiosity was wondering if it's possible to convert it to a T-mobile variant. I mostly am wondering because of wifi calling and volte. I know most people want to do the opposite, but I figured I'd ask. If it's possible to convert a T-mobile version to developer than I figured it could be done the other way. Any info would be much appreciated! Thank you!
Nick12484 said:
Odd question but I have the Developer edition. I use it on T-mobile and just out of curiosity was wondering if it's possible to convert it to a T-mobile variant. I mostly am wondering because of wifi calling and volte. I know most people want to do the opposite, but I figured I'd ask. If it's possible to convert a T-mobile version to developer than I figured it could be done the other way. Any info would be much appreciated! Thank you!
Click to expand...
Click to collapse
You sure can. S-Off using sunshine. Change the mid to 0PJA12000 and cid to T-MOB010. Then flash the official Tmobile ruu from http://dl3.htc.com/application/RUU_...01_81.03.50702G_F_release_445023_signed_2.exe
effortless said:
You sure can. S-Off using sunshine. Change the mid to 0PJA12000 and cid to T-MOB010. Then flash the official Tmobile ruu from http://dl3.htc.com/application/RUU_HIMA_UL_L51_SENSE70_TMUS_MR_TMOUS_2.7.531.6_R4_Radio_01.01_U11440601_81.03.50702G_F_release_445023_signed_2.exe
Click to expand...
Click to collapse
Would I get otas from T-Mobile or would I have to install those manually as they become available?
Nick12484 said:
Would I get otas from T-Mobile or would I have to install those manually as they become available?
Click to expand...
Click to collapse
As long as you don't root (or touch the system partition), you'd get OTA's from T-mobile automatically.
effortless said:
As long as you don't root (or touch the system partition), you'd get OTA's from T-mobile automatically.
Click to expand...
Click to collapse
Cool! Thanks so much for the info!
Nick12484 said:
Cool! Thanks so much for the info!
Click to expand...
Click to collapse
No problem, enjoy! Also, if you'd like to see the OTA for yourself, flash an older T-Mobile RUU ( http://dl3.htc.com/application/RUU_...51_68.08.50320G_F_release_428184_signed_2.exe ) and check for updates to get to the latest version.
Nick12484 said:
Odd question but I have the Developer edition. I use it on T-mobile and just out of curiosity was wondering if it's possible to convert it to a T-mobile variant. I mostly am wondering because of wifi calling and volte. I know most people want to do the opposite, but I figured I'd ask. If it's possible to convert a T-mobile version to developer than I figured it could be done the other way. Any info would be much appreciated! Thank you!
Click to expand...
Click to collapse
I agree with effortless I have done this with both of my m9's. What I did was after s-off and bootloader unlock I changed mid and cid. But instead of flashing the RUU right away I flashed the 1.32 no-wipe firmware from here. after that I ran the 1.32 RUU and after that I accepted the ota.
Not only will you get the volte and wifi calling but my reception went from 3 bars to full bars. was definitely worth the headache.
bigp951 said:
I agree with effortless I have done this with both of my m9's. What I did was after s-off and bootloader unlock I changed mid and cid. But instead of flashing the RUU right away I flashed the 1.32 no-wipe firmware from here. after that I ran the 1.32 RUU and after that I accepted the ota.
Not only will you get the volte and wifi calling but my reception went from 3 bars to full bars. was definitely worth the headache.
Click to expand...
Click to collapse
Two more questions. I'm familiar with unlocking and s-off, but is there a guide for the mid and sid?
Nick12484 said:
Two more questions. I'm familiar with unlocking and s-off, but is there a guide for the mid and sid?
Click to expand...
Click to collapse
You change them via fastboot in download mode (after you S-OFF).
To change CID: fastboot oem writecid T-MOB010
To change MID: fastboot oem writemid 0PJA12000
Sent from my HTC One M9 using Tapatalk
Best to use the ruu zip and rename it to 0PJAIMG.zip then put on root of ext sd them go into download mode. I don't use exe file because you don't want to be flashing like that and the electricity shut off while bootloader is flashing
ghosttown242 said:
Best to use the ruu zip and rename it to 0PJAIMG.zip then put on root of ext sd them go into download mode. I don't use exe file because you don't want to be flashing like that and the electricity shut off while bootloader is flashing
Click to expand...
Click to collapse
A perk of flashing from SD card is that the phones status returns to official as well.
bigp951 said:
A perk of flashing from SD card is that the phones status returns to official as well.
Click to expand...
Click to collapse
Mines did? I don't get why people love custom roms I prefer stock and my battery last longer
ghosttown242 said:
Best to use the ruu zip and rename it to 0PJAIMG.zip then put on root of ext sd them go into download mode. I don't use exe file because you don't want to be flashing like that and the electricity shut off while bootloader is flashing
Click to expand...
Click to collapse
Do I need to use a windows computer for this? I have both, didn't know if one is better
Nick12484 said:
Do I need to use a windows computer for this? I have both, didn't know if one is better
Click to expand...
Click to collapse
Don't even need a computer
1) down load https://drive.google.com/file/d/0B-_A25cR0bQFUk1rX29JMFpnWlk/view
2) rename it to 0PJAIMG.zip
3) put it on root of ext sd
4) reboot to download mode
Make sure you are s off and cid is T-MOB010
ghosttown242 said:
Don't even need a computer
1) down load https://drive.google.com/file/d/0B-_A25cR0bQFUk1rX29JMFpnWlk/view
2) rename it to 0PJAIMG.zip
3) put it on root of ext sd
4) reboot to download mode
Make sure you are s off and cid is T-MOB010
Click to expand...
Click to collapse
Sorry for all the questions, it's been a while since I've done anything to my phone. I have the developer one so the bootloader is unlocked. Do I need a computer to s off and change the cid? I also need to change the mid or flashing that will do it? I don't wanna screw this up lol so i figure ask now so I won't be sorry later. Thanks!
Nick12484 said:
Sorry for all the questions, it's been a while since I've done anything to my phone. I have the developer one so the bootloader is unlocked. Do I need a computer to s off and change the cid? I also need to change the mid or flashing that will do it? I don't wanna screw this up lol so i figure ask now so I won't be sorry later. Thanks!
Click to expand...
Click to collapse
Only thing you need a PC for is cid and mid
ghosttown242 said:
Only thing you need a PC for is cid and mid
Click to expand...
Click to collapse
So let me make sure I got everything I need to do.
1. I should be able to root because the bootloader should already be unlocked so root the phone.
2. S_off using sunshine
3. Change mid and cid with a pc
4. use the file from the google drive link and flash that from download mode
I miss anything?
Nick12484 said:
So let me make sure I got everything I need to do.
1. I should be able to root because the bootloader should already be unlocked so root the phone.
2. S_off using sunshine
3. Change mid and cid with a pc
4. use the file from the google drive link and flash that from download mode
I miss anything?
Click to expand...
Click to collapse
Rename the zip to 0PJAIMG.zip
ghosttown242 said:
Rename the zip to 0PJAIMG.zip
Click to expand...
Click to collapse
Ok I think I got it. Normal fastboot from the sdk is ok right? I don't need anything special from HTC?
Nick12484 said:
Ok I think I got it. Normal fastboot from the sdk is ok right? I don't need anything special from HTC?
Click to expand...
Click to collapse
Use ext sd when flashing much easier and safer

HTC Desire 816 Dual SIM, only boots into Fastboot!

My HTC Desire 816 Dual SIM,
1. does not boot normally,
2. only boots into FASTBOOT page,
3. in FASTBOOT page I can select and enter Hboot page,
4. in Hboot menu, when I select RECOVERY, or FACTORY RESET, it returns only to FASTBOOT page.
5. as the attachment shows, there is nothing written in front of "OS-"; it is blank.
Questions:
1. In these conditions, is it possible to flash the ZIP ROM from sdcard via Hboot?
2. Is it not necessary to flash stock recovery, wipe some partitions, etc first, and only then proceed to flashing ZIP ROM from sdcard via Hboot?
Hi
I have the same problem as you only my. HTC is the sIngle sim A5-UL Version.
So far I have not had any replies regarding the problem.
Hopefully we will get a resolution
sometime.
Sent from my LG-H815 using Tapatalk
[/COLOR]
Dr.Ghobar said:
My HTC Desire 816 Dual SIM,
1. does not boot normally,
2. boots directly into Fastboot page,
3. in fastboot page I can select and enter Hboot page,
4. in Hboot menu, when I select Recovery, or Factory Reset, it returns only to Fastboot page.
5. as the attachment shows, the OS- is blank
Questions:
1. In these conditions, is it possible to flash the ZIP ROM from sdcard via Hboot?
2. Is it not necessary to flash stock recovery, wipe some partitions, etc first, and only then proceed to flashing ZIP ROM from sdcard via Hboot?
Click to expand...
Click to collapse
It should be but you will need to have the stock recovery reinstalled by first unlocking your bootloader then flashing back your stock recovery then relock bootloader and then flash the RUU or stock zip file thru either ADB /fastboot on your computer or via SD card and renaming the image OP9CIMG and hboot should pick it up and flash it automatically. Did you accidentally wipe your system or try to flash something that corrupted it? In other words what happened before all this? We're you rooted with a custom recovery or still on stock?
---------- Post added at 11:09 PM ---------- Previous post was at 11:01 PM ----------
Stransky said:
Hi
I have the same problem as you only my. HTC is the sIngle sim A5-UL Version.
So far I have not had any replies regarding the problem.
Hopefully we will get a resolution
sometime.
Sent from my LG-H815 using Tapatalk
Click to expand...
Click to collapse
Didn't nukaru's a5_ul forum link I gave you earlier this month help? Sorry your still having issues.
Stransky said:
Hi
I have the same problem as you only my. HTC is the sIngle sim A5-UL Version.
So far I have not had any replies regarding the problem.
Hopefully we will get a resolution
sometime.
Sent from my LG-H815 using Tapatalk
Click to expand...
Click to collapse
Dr.Ghobar said:
My HTC Desire 816 Dual SIM,
1. does not boot normally,
2. boots directly into Fastboot page,
3. in fastboot page I can select and enter Hboot page,
4. in Hboot menu, when I select Recovery, or Factory Reset, it returns only to Fastboot page.
5. as the attachment shows, the OS- is blank
Questions:
1. In these conditions, is it possible to flash the ZIP ROM from sdcard via Hboot?
2. Is it not necessary to flash stock recovery, wipe some partitions, etc first, and only then proceed to flashing ZIP ROM from sdcard via Hboot?
Click to expand...
Click to collapse
Dwnload ur respective RUU zip file,rename the file to. "0P9CIMG.zip". put in ext.sd card ,put the phone in hboot mode..it will autimatically detect the file and will ask for permission
Stransky said:
Hi
So far I have not had any replies regarding the problem.
Click to expand...
Click to collapse
Did you find ROM zip and did you try to flash it via sdcard and Hboot?
thoctor said:
It should be but you will need to have the stock recovery reinstalled by first unlocking your bootloader then flashing back your stock recovery then relock bootloader and then flash the RUU or stock zip file thru either ADB /fastboot on your computer or via SD card and renaming the image OP9CIMG and hboot should pick it up and flash it automatically. Did you accidentally wipe your system or try to flash something that corrupted it? In other words what happened before all this? We're you rooted with a custom recovery or still on stock?
Click to expand...
Click to collapse
1. I tried to unlock bootloader but the last stage that asks Yes or No, did not appear on my phone and therefore no unlocking happened as the attachment shows. Can you help me with this problem?
2. I wiped nothing and flashed nothing. The phone was working normally and the battery finished. I plugged the charger but when I tried to turn on the phone it only booted to fastboot mode as I explained in the original post.
3. I was on the original ROM that came with phone. I never did any manipulation.
ajeshmanu said:
Dwnload ur respective RUU zip file,rename the file to. "0P9CIMG.zip". put in ext.sd card ,put the phone in hboot mode..it will autimatically detect the file and will ask for permission
Click to expand...
Click to collapse
Because my phone has behaved abnormally (OS- is blank, as attachment shows; unlocking bootloader did not show Yes or No page; and other abnormalities), I am not sure whether to download a file over 1.20GB, or not? I am afraid about failure! Is not my phone in a situation that needs some preparations before doing what you said?
Hi
Thanks for reply. I was attempting to go back to stock and had installed stock recovery and then relocked the bootloader and when i tried to install the RUU it said it was the wrong one.
I then tried the Hboot way but received the same error. I need to find several RUUs to be able to find the correct version for my 816 which i believe is Asian but not sure where.
Sent from my LG-H815 using Tapatalk
Stransky said:
Hi
Thanks for reply. I was attempting to go back to stock and had installed stock recovery and then relocked the bootloader and when i tried to install the RUU it said it was the wrong one.
I then tried the Hboot way but received the same error. I need to find several RUUs to be able to find the correct version for my 816 which i believe is Asian but not sure where.
Sent from my LG-H815 using Tapatalk
Click to expand...
Click to collapse
Oh, ok I get it now. Think the forum I linked you to was for the European a5_ul. Here's a link to some a5_ul roms kitkat and lollipop. I see one of the lollipop versions is Asia. Try to match your CID and version ID or at least your radio ID's before flashing it. "fastboot getvar all" will give you most of that info but it looks like that might be your firmware. Also make sure you relocked your bootloader before flashing. Good luck
http://forum.gsmhosting.com/vbb/f485/htc-desire-816-official-stock-roms-always-updated-1948682/
Dr.Ghobar said:
Did you find ROM zip and did you try to flash it via sdcard and Hboot?
1. I tried to unlock bootloader but the last stage that asks Yes or No, did not appear on my phone and therefore no unlocking happened as the attachment shows. Can you help me with this problem?
2. I wiped nothing and flashed nothing. The phone was working normally and the battery finished. I plugged the charger but when I tried to turn on the phone it only booted to fastboot mode as I explained in the original post.
3. I was on the original ROM that came with phone. I never did any manipulation.
Because my phone has behaved abnormally (OS- is blank, as attachment shows; unlocking bootloader did not show Yes or No page; and other abnormalities), I am not sure whether to download a file over 1.20GB, or not? I am afraid about failure! Is not my phone in a situation that needs some preparations before doing what you said?
Click to expand...
Click to collapse
Sorry, I wasn't trying to accuse you of doing something to your phone but those pictures don't show me any of that. It just shows that you seem to no longer have an OS with your lack of a CID and something happened to cause this. It's not about finger pointing but getting the issue resolved for you I know. As for helping you unlock your bootloader the method is pretty straight forward and if it didn't work for whatever reason the only real advice I can give is to just try it again. That's how I unlocked mine so maybe it was just a glitch and another attempt will work. For now I'm more concerned that you didn't wipe anything yet your recovery and firmware seen too be missing or at least inaccessible from your bootloader. The factory reset was going to be my first suggestion but since your already done that have you tried to enter your recovery thru ADB/fastboot? (fastboot reboot recovery.) The other thing is what region are you in( India, Asia, European) and does " fastboot getvar all" work from using ADB? Also if your OS is wiped then any RUU flash will reformat your partitions for you and restore your rom. Also were you on kitkat or lollipop stock rom?
thoctor said:
Oh, ok I get it now. Think the forum I linked you to was for the European a5_ul. Here's a link to some a5_ul roms kitkat and lollipop. I see one of the lollipop versions is Asia. Try to match your CID and version ID or at least your radio ID's before flashing it. "fastboot getvar all" will give you most of that info but it looks like that might be your firmware. Also make sure you relocked your bootloader before flashing. Good luck
http://forum.gsmhosting.com/vbb/f485/htc-desire-816-official-stock-roms-always-updated-1948682/
Click to expand...
Click to collapse
Hi
Again thanks for the reply.
My 816 A5UL is Asia-HK-CHT
CID-622
I cannot find a RUU that matches.
I believe the Rom could be OPc21000
Which i cannot find anywhere.
Sent from my LG-H815 using Tapatalk
Stransky said:
Hi
Again thanks for the reply.
My 816 A5UL is Asia-HK-CHT
CID-622
I cannot find a RUU that matches.
I believe the Rom could be OPc21000
Which i cannot find anywhere.
Sent from my LG-H815 using Tapatalk
Click to expand...
Click to collapse
Yeah I've never heard of that version before. I only found one link here below that even mentions that CID but no solution. If you haven't flashed the one I linked I'd try it anyway because as long as your S on the signed rom won't flash if it's the wrong one but if your sure it's wrong then save the data hit to your ISP cap. Sorry I wasn't of more help to you.
http://forum.xda-developers.com/des...pop-a5dug-firmware-to-fix-wifi-t3126905/page5
1. I did not mean that you were trying to... 2. Answers
thoctor said:
Sorry, I wasn't trying to accuse you of doing something to your phone but those pictures don't show me any of that. It just shows that you seem to no longer have an OS with your lack of a CID and something happened to cause this. It's not about finger pointing but getting the issue resolved for you I know. As for helping you unlock your bootloader the method is pretty straight forward and if it didn't work for whatever reason the only real advice I can give is to just try it again. That's how I unlocked mine so maybe it was just a glitch and another attempt will work. For now I'm more concerned that you didn't wipe anything yet your recovery and firmware seen too be missing or at least inaccessible from your bootloader. The factory reset was going to be my first suggestion but since your already done that have you tried to enter your recovery thru ADB/fastboot? (fastboot reboot recovery.) The other thing is what region are you in( India, Asia, European) and does " fastboot getvar all" work from using ADB? Also if your OS is wiped then any RUU flash will reformat your partitions for you and restore your rom. Also were you on kitkat or lollipop stock rom?
Click to expand...
Click to collapse
You are being kind to me by trying to resolve my problem.
1. I tried again but it did not help.
2. I will try "fastboot reboot recovery", and tell you about the result.
3. Through online chat I gave my IMEI to HTC middle east and they told me that my Software Version is 2.34.401.2.
4. " fastboot getvar all" works.
5. You said "if your OS is wiped then any RUU flash will reformat your partitions". Can we be sure that it is wiped? If we can not be sure, is it necessary to do wipes and formats?
6. I was on Lollipop. 5.0.2.
Since you never unlocked the bootloader before, flashing the stock rom(ruu) should work. Give it a shot. Just make sure you flash the same Android version that you had before as downgrading might not work.
Dr.Ghobar said:
You are being kind to me by trying to resolve my problem.
1. I tried again but it did not help.
2. I will try "fastboot reboot recovery", and tell you about the result.
3. Through online chat I gave my IMEI to HTC middle east and they told me that my Software Version is 2.34.401.2.
4. " fastboot getvar all" works.
5. You said "if your OS is wiped then any RUU flash will reformat your partitions". Can we be sure that it is wiped? If we can not be sure, is it necessary to do wipes and formats?
6. I was on Lollipop. 5.0.2.
Click to expand...
Click to collapse
1. That's fine. For now it's OK that it's locked. It's only if your stock recovery is gone that you would need to unlock the bootloader and reflash the stock recovery zip file that you would need to find and flash. Hopefully it's still there just inaccessible for now.
2. Just an idea to verify your recovery is still there
3. OK then that's the firmware you want to flash or higher version
4. From that it should have your CID and version ID but if it's corrupted or wiped it may not show. Those 2 are what you usually use to verify the firmware your flashing is the correct version for your region. You can also verify your radio ID as well as most firmware zips show those numbers as well.
5. It's OK an RUU file will reformat everything and bring it all back to stock. It has all the images in it (radio, system, recovery etc.)
6. That's good. Just make sure you flash that version or higher as going down in firmware isn't possible without S off. If you flash the wrong firmware then the signed RUU shouldn't flash.
Also what region are you in ( India, Asia, Europe?) your phones firmware (CID is your carriers region) that you flash needs to match you're CID.
thoctor said:
1. That's fine. For now it's OK that it's locked. It's only if your stock recovery is gone that you would need to unlock the bootloader and reflash the stock recovery zip file that you would need to find and flash. Hopefully it's still there just inaccessible for now.
2. Just an idea to verify your recovery is still there
3. OK then that's the firmware you want to flash or higher version
4. From that it should have your CID and version ID but if it's corrupted or wiped it may not show. Those 2 are what you usually use to verify the firmware your flashing is the correct version for your region. You can also verify your radio ID as well as most firmware zips show those numbers as well.
5. It's OK an RUU file will reformat everything and bring it all back to stock. It has all the images in it (radio, system, recovery etc.)
6. That's good. Just make sure you flash that version or higher as going down in firmware isn't possible without S off. If you flash the wrong firmware then the signed RUU shouldn't flash.
Also what region are you in ( India, Asia, Europe?) your phones firmware (CID is your carriers region) that you flash needs to match you're CID.
Click to expand...
Click to collapse
1. How did you know that the stock recovery is "still there just inaccessible for now"?
2. I will try after 35 hours from now.
4. INFOmodelid: 0P9C70***
INFOcidnum: HTC__J15
The picture attached to original post shows: RADIO-INVALID_VER_INFO
In getvar: INFOversion-baseband: INVALID_VER_INFO
About region: my CID is HTC_J15. And as my search shows, 401 (in my Software Version 2.34.401.2) means Europe.
Dr.Ghobar said:
1. How did you know that the stock recovery is "still there just inaccessible for now"?
2. I will try after 35 hours from now.
4. INFOmodelid: 0P9C70***
INFOcidnum: HTC__J15
The picture attached to original post shows: RADIO-INVALID_VER_INFO
In getvar: INFOversion-baseband: INVALID_VER_INFO
About region: my CID is HTC_J15. And as my search shows, 401 (in my Software Version 2.34.401.2) means Europe.
Click to expand...
Click to collapse
1. I don't know it's still there that's why I used the word "hopefully. " You should be glad that you can still get into your bootloader because without that access your phone is an expensive paper weight. Thanks for the other info. It's exactly what you need to know to find and flash your firmware.
ajeshmanu said:
Dwnload ur respective RUU zip file,rename the file to. "0P9CIMG.zip". put in ext.sd card ,put the phone in hboot mode..it will autimatically detect the file and will ask for permission
Click to expand...
Click to collapse
You said rename the file to "0P9CIMG.zip".
As getvar shows, my phone's exact modelid is: 0P9C70***
So what is the principle according to which the file should be renamed? that is, what characters of MID should be mentioned before .zip?
thoctor said:
1. I don't know it's still there that's why I used the word "hopefully. " You should be glad that you can still get into your bootloader because without that access your phone is an expensive paper weight. Thanks for the other info. It's exactly what you need to know to find and flash your firmware.
Click to expand...
Click to collapse
If "fastboot reboot recovery" cannot work, it means that I have lost stock recovery.
1. Am I right?
2. If it is not there, is it still possible to flash the rom? Or I must first flash the stock recovery?
3. Is possible lacking of stock recovery what prevents the phone from showing Yes or No page ("Unlocking bootloader?" page)
4. Is it possible just to flask stock recovery for now and leave flashing ROM to some time later?
Dr.Ghobar said:
If "fastboot reboot recovery" cannot work, it means that I have lost stock recovery.
1. Am I right?
2. If it is not there, is it still possible to flash the rom? Or I must first flash the stock recovery?
3. Is possible lacking of stock recovery what prevents the phone from showing Yes or No page ("Unlocking bootloader?" page)
Click to expand...
Click to collapse
1. Or it's corrupted but it could still be there.
2. Usually you need to flash back the stock recovery but I've heard of people flashing over their custom recovery with an RUU(rom utility upgrade) and the RUU replaced everything including the stock recovery which is in the file.
3. Not 100% sure on that one. The bootloader is a separate kernel provided with every Android OS so the recovery is separate from it. That one I can't figure out as when you were trying to unlock your bootloader you're firmware was fine at that time I assume. That's the strange part.
thoctor said:
That one I can't figure out as when you were trying to unlock your bootloader you're firmware was fine at that time I assume. That's the strange part.
Click to expand...
Click to collapse
You seem to mean I have had problem with unlocking bootloader when my phone was normal.
No. I did not try then. Only after problem I tried unlocking. Please read my post: No "Yes or No" page when Unlocking bootloader! http://forum.xda-developers.com/des...via-htcdev-t3316781/post65371393#post65371393
Stransky said:
Hi
Again thanks for the reply.
My 816 A5UL is Asia-HK-CHT
CID-622
I cannot find a RUU that matches.
I believe the Rom could be OPc21000
Which i cannot find anywhere.
Sent from my LG-H815 using Tapatalk
Click to expand...
Click to collapse
What is your "getvar all" information?
(Perhaps I can be able to give you some points.)

Cannot relock bootloader.

I have gone back to stock also back to S on, that part was by mistake. I don't seem to have any recoveries either, I just get the red exclamation mark when I boot to recovery. I have tried to flash both stock and TWRP but get the same error message.
FAILED cannot flash this partition in s-on state.
This happens with both stock and TWRP recoveries.
Has anyone seen this before and what steps can I do to make it work?
potsykate said:
I have gone back to stock also back to S on, that part was by mistake. I don't seem to have any recoveries either, I just get the red exclamation mark when I boot to recovery. I have tried to flash both stock and TWRP but get the same error message.
FAILED cannot flash this partition in s-on state.
This happens with both stock and TWRP recoveries.
Has anyone seen this before and what steps can I do to make it work?
Click to expand...
Click to collapse
Try flashing an SD card RUU.
deakelem said:
Try flashing an SD card RUU.
Click to expand...
Click to collapse
I would but I cannot find a RUU for European version.
Would the zip version from here be the same?
http://forum.xda-developers.com/htc-10/how-to/stock-stock-collection-recovery-ruu-ota-t3359297
potsykate said:
I would but I cannot find a RUU for European version.
Would the zip version from here be the same?
http://forum.xda-developers.com/htc-10/how-to/stock-stock-collection-recovery-ruu-ota-t3359297
Click to expand...
Click to collapse
Just flash any RUU to begin with. That will at least give you a recovery. Your only choice is an RUU at this point. (that matches your CID/MID) You are softbricked for sure right now. Sounds like you re-locked your bootloader as well as you are s-on. Otherwise you'd be able to flash a recovery.
tabp0le said:
Just flash any RUU to begin with. That will at least give you a recovery. Your only choice is an RUU at this point. (that matches your CID/MID) You are softbricked for sure right now. Sounds like you re-locked your bootloader as well as you are s-on. Otherwise you'd be able to flash a recovery.
Click to expand...
Click to collapse
There is no RUU for Europe, as far as I know. I have restored the phone earlier and am able to boot it up and use it normally. It's just that I cannot instal a recovery no matter what.
potsykate said:
There is no RUU for Europe, as far as I know. I have restored the phone earlier and am able to boot it up and use it normally. It's just that I cannot instal a recovery no matter what.
Click to expand...
Click to collapse
Try using sunshine to s-off
tabp0le said:
Try using sunshine to s-off
Click to expand...
Click to collapse
I've thought of that. I originally used sunshine to go S-off and had a chat with them earlier and went S-on, accidentally. As I've paid for Sunshine once, do I have to pay again. I'm on the same phone so hopefully not.
The sunshine faq states that you can reuse the same license you purchased as long as you're on the same phone. So installing sunshine again should do the trick
Tarima said:
The sunshine faq states that you can reuse the same license you purchased as long as you're on the same phone. So installing sunshine again should do the trick
Click to expand...
Click to collapse
Thanks for that, I did the sunshine again and went for unlocked S-off. I have now installed TWRP 3026 and downloading Viperrom 3.4 to install. I did have a full backup but formatted my SD card so I've got to start again.
Umm the red exclamation mark is stock recovery. You have to press a combination of buttons to enter it. I think its up and down on the volume

htc 10 / How can i go back stock rom?

hi,
How can i go back stock rom (with boot, recovery, etc.) from Viper 10 4.5.0?
***************************************
hTC download mode
*** UNLOCKED ***
htc_pmeuh1 PVT S-ON
LK-1.0.0.0000
[email protected]
OpenDSP-v18.3.8996.00524_0721
OS-1.95.401.3
Aug 31.2016, 15:01:14(797255)
***************************************
Thanks in advance.
You could try looking in the guides section.
https://forum.xda-developers.com/htc-10/how-to/stock-stock-collection-recovery-ruu-ota-t3359297
squ89r97 said:
You could try looking in the guides section.
https://forum.xda-developers.com/htc-10/how-to/stock-stock-collection-recovery-ruu-ota-t3359297
Click to expand...
Click to collapse
I checked everwhere but unfortunately there is no file for 1.95.401.3
ferhatpeker said:
I checked everwhere but unfortunately there is no file for 1.95.401.3
Click to expand...
Click to collapse
Then just use the 1.95.401.5 stock signed ruu, only if your cid and mid match that is.
squ89r97 said:
Then just use the 1.95.401.5 stock signed ruu, only if your cid and mid match that is.
Click to expand...
Click to collapse
I downloaded it but it is not exe,
I dont know how zip files can be installed since its S-ON and OS version is different between my phone and downloaded file.
ferhatpeker said:
I downloaded it but it is not exe,
I dont know how zip files can be installed since its S-ON and OS version is different between my phone and downloaded file.
Click to expand...
Click to collapse
No it's not an exe, it says it's a zip. Zip ruu's can be placed on the root of your external SD renamed appropriately and flashed in bootloader. Just do a little searching for flashing ruu via SD card method and it'll give you the file name it needs to be renamed to.
squ89r97 said:
No it's not an exe, it says it's a zip. Zip ruu's can be placed on the root of your external SD renamed appropriately and flashed in bootloader. Just do a little searching for flashing ruu via SD card method and it'll give you the file name it needs to be renamed to.
Click to expand...
Click to collapse
sorry, i have been searching for 3 days everywhere
can i do it as you mentioned (flashing ruu via SD card method) on S-ON phone?
ferhatpeker said:
sorry, i have been searching for 3 days everywhere
can i do it as you mentioned (flashing ruu via SD card method) on S-ON phone?
Click to expand...
Click to collapse
Pretty sure you can only flash signed firmware with s-on and you are.
You can only flash the same or higher firmware also.
squ89r97 said:
Pretty sure you can only flash signed firmware with s-on and you are.
You can only flash the same or higher firmware also.
Click to expand...
Click to collapse
Thank you very much, it works.
ferhatpeker said:
If you are sure i will flash below named RUU with SD card method
My phone version is 1.95.401.3 and S-ON, CID and MID are ok, and its higher than my OS version...
2PS6IMG_PERFUME_UHL_N70_SENSE80GP_HTC_Europe_2.28.401.9
Is it ok?
Click to expand...
Click to collapse
Dude, I'm just giving you advice, not telling you to do it or saying it'll be 100% fine. Everything I have learnt, I've leant from xda. I know you've been reading for 3 days, but read for another 3 days or weeks, just to be sure.
squ89r97 said:
Dude, I'm just giving you advice, not telling you to do it or saying it'll be 100% fine. Everything I have learnt, I've leant from xda. I know you've been reading for 3 days, but read for another 3 days or weeks, just to be sure.
Click to expand...
Click to collapse
Sorry man, i flashed it so it works. Thank you very much. no more 3 days i have to work...
ferhatpeker said:
Sorry man, i flashed it so it works. Thank you very much. no more 3 days i have to work...
Click to expand...
Click to collapse
You're welcome dude, glad it worked out well for you.

Locked bootloader and S-On question...

Guys, stupid question.
If my bootloader is locked and I have S-On can I rename a Stock Rom to 0PJAIMG.zip put it on my SDCard and install it?
eskimosound said:
Guys, stupid question.
If my bootloader is locked and I have S-On can I rename a Stock Rom to 0PJAIMG.zip put it on my SDCard and install it?
Click to expand...
Click to collapse
Yes, but the ruu needs to be signed and the same versions or higher.
Another observation: If you have a 1.xx.yyy.xx you can only flash a ruu starting with 1.xx, the same way for 2.xx, 3.xx.
lucyr03 said:
Yes, but the ruu needs to be signed and the same versions or higher.
Another observation: If you have a 1.xx.yyy.xx you can only flash a ruu starting with 1.xx, the same way for 2.xx, 3.xx.
Click to expand...
Click to collapse
Thanks, I think I have the dead nand issue, I can only get into bootloader and not recovery or download.....I also don't know what firmware I'm on....so maybe start from the bottom up?
If I do will it say Status:Modified?
I'm UK O2 network I think?!
eskimosound said:
Thanks, I think I have the dead nand issue, I can only get into bootloader and not recovery or download.....I also don't know what firmware I'm on....so maybe start from the bottom up?
If I do will it say Status:Modified?
I'm UK O2 network I think?!
Click to expand...
Click to collapse
If you can't boot in download it's probably a dead nand which is an hardware issue.
lucyr03 said:
Yes, but the ruu needs to be signed and the same versions or higher.
Another observation: If you have a 1.xx.yyy.xx you can only flash a ruu starting with 1.xx, the same way for 2.xx, 3.xx.
Click to expand...
Click to collapse
lucyr03 said:
If you can't boot in download it's probably a dead nand which is an hardware issue.
Click to expand...
Click to collapse
Just to update, it was the Dead Nand issue.
HTC fixed it within a week for free!!
Excellent......

Categories

Resources