{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
THIS IS BROKENPOP ROM FOR TORO. ALL CREDITS TO TEAM BROKENPOP. I COMPILED THIS ON MY OWN BEHALF, TO MY OWN LIKINGS. ADDING OPTIMISATIONS, AND BUILDING WITH UBERTC. NOTE, THIS IS BLIND BUILT. HOWEVER, THE SAME ROM IS FUNCTIONING PROPERLY ON MY TOROPLUS FLASHED TO PP ATM. FLASH AT OWN RISK.
***********YER WARRANTY IS NOW VOID,RESEARCH BEFORE MODIFYING YER DEVICE, I AM NOT TO BE HELD RESPONSIBLE FOR YER ACTIONS***************
DOWNLOADv.3.9
https://drive.google.com/file/d/0B5FXgIkne2uXSFdtZ2V3cFV5ems/view?usp=sharing
*see post 2
BUGS
installation instructions
First time using this ROM or coming from another ROM other than BrokenPOP
1. Make a nandroid backup
2. Perform a factory reset/wipe
3. Flash ROM then gapps
SOURCES
ROM https://github.com/BrokenROM
KERNEL https://github.com/bsmitty83/Kernel_Tuna_AOSP
OPTIMISATIONS https://github.com/ArchiDroid/android_build/commit/f9b983e8e11624b48ae575da206f1baf6979772c
CREDITS
BROKENPOP, AOSP, SLIM, CM, [email protected],UBER-DEVS
brokenpopv3.9
ive included my personal build of chromium compiled with ubertc exclusively. its not working oob. to use it, install titanium backup, tick backup, and backup chromium. uninstall the app via settings, broken pieces, system app remover, tick chromium, then tick the garbage icon at the bottom screen. open titanium backup tick backup, tick chromium, tick restore, then tick "app only." profit.
no mobile network bug
modified the build prop, adding the toro ril fix.
Never saw this before. Whats this ROM look like?
traco1 said:
Never saw this before. Whats this ROM look like?
Click to expand...
Click to collapse
Looks like a lollipop on steroids
Pics ,,,, Vids Available
brandonabandon said:
Looks like a lollipop on steroids
Click to expand...
Click to collapse
I'm interested ....... got my attention!
---------- Post added at 08:29 PM ---------- Previous post was at 08:22 PM ----------
no zip?
traco1 said:
I'm interested ....... got my attention!
---------- Post added at 08:29 PM ---------- Previous post was at 08:22 PM ----------
no zip?
Click to expand...
Click to collapse
The download link is under DOWNLOADv3.9 in op
Broken is a fantastic rom , thanks for the build man :thumbs-up:
When I install it in recovery, the ROM is fine but of fails on every version of gapps I try saying not enough space in the system folder, which is bs because 1. I formatted it and 2. I've never seen that message and I'm a flashing junkie. Any ideas?
Sent from my Galaxy Nexus using XDA Free mobile app
pogibry said:
When I install it in recovery, the ROM is fine but of fails on every version of gapps I try saying not enough space in the system folder, which is bs because 1. I formatted it and 2. I've never seen that message and I'm a flashing junkie. Any ideas?
Sent from my Galaxy Nexus using XDA Free mobile app
Click to expand...
Click to collapse
try mini
http://forum.xda-developers.com/android/apps-games/hdpi-google-apps-5-1-t3066172
brandonabandon said:
try mini
http://forum.xda-developers.com/android/apps-games/hdpi-google-apps-5-1-t3066172
Click to expand...
Click to collapse
I am trying it as we speak. Thanks!!
That also reminds me....I'm using CWM recovery and I really miss TWRP. I was told that CWM has a much higher success rate and have been hesitant to go back. What's your $.05?
Everything seems to be working so far, just installed. Only major issue is Google Play Services keeps crashing
No gapps issues here, but my data won't connect. I'm able to use WiFi fine at home, just not Mobile data.
quickdraw86 said:
No gapps issues here, but my data won't connect. I'm able to use WiFi fine at home, just not Mobile data.
Click to expand...
Click to collapse
try toggling on/off data. no dice? tick settings ,cellular networks, access point names, and select yer verizon apn. no dice?try dialing *#*#4636#*#* with phone app, tick phone information, scroll to set preferred network type, tick the arrow to the right of the screen, scroll the options and tick lte/gsm auto (prl). no dice? needs new kernel unless other users report mobile data is working.
The Doctor04 said:
Everything seems to be working so far, just installed. Only major issue is Google Play Services keeps crashing
Click to expand...
Click to collapse
toggle gps to device only, it gapps specific issue.
Any successful mobile data connection on this ROM?
brandonabandon said:
try toggling on/off data. no dice? tick settings ,cellular networks, access point names, and select yer verizon apn. no dice?try dialing *#*#4636#*#* with phone app, tick phone information, scroll to set preferred network type, tick the arrow to the right of the screen, scroll the options and tick lte/gsm auto (prl). no dice? needs new kernel unless other users report mobile data is working.
Click to expand...
Click to collapse
Tried all you mentioned besides hidden phone settings menu. Going top work now, will try and report back when I get home.
quickdraw86 said:
Tried all you mentioned besides hidden phone settings menu. Going top work now, will try and report back when I get home.
Click to expand...
Click to collapse
Right on. Could be build.prop needs modified Or kernel worst case scenario.
quickdraw86 said:
No gapps issues here, but my data won't connect. I'm able to use WiFi fine at home, just not Mobile data.
Click to expand...
Click to collapse
brandonabandon said:
Right on. Could be build.prop needs modified Or kernel worst case scenario.
Click to expand...
Click to collapse
Could be the issue with APN settings that plagued the Toro Galaxy Nexus when we 1st started getting Lollipop. It caused Data not to function. @musical_chairs just recently had this issue with his latest build. Try flashing the APN fix linked in the post I provided.
http://forum.xda-developers.com/showpost.php?p=63074912&postcount=262
christianpeso said:
Could be the issue with APN settings that plagued the Toro Galaxy Nexus when we 1st started getting Lollipop. It caused Data not to function. @musical_chairs just recently had this issue with his latest build. Try flashing the APN fix linked in the post I provided.
http://forum.xda-developers.com/showpost.php?p=63074912&postcount=262
Click to expand...
Click to collapse
verify if this works and i will update the op with this link/credits ty
new upload in op. clean flash. only change is build.prop.
Related
Official PAC-Man Nightly for the Optimus G E973
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Known Bugs:
Code:
Instalation:
Code:
1. Factory Reset (Wipe Data/Cache)
2. Wipe System
3. Install Rom
4. Install Gapps
5. Reboot....
Downloads:
Code:
[URL="http://pacman.basketbuild.com/index.php?dir=main/e973/nightly/"]Nightly Rom[/URL]
[URL="http://www.androidfilehost.com/?a=show&w=files&flid=7775"]Banks' Gapps[/URL]
[URL="http://www.androidfilehost.com/?w=files&flid=7987"]PA 0-Day Gapps[/URL]
Sources:
Cyanogenmod Github
Pac-Man Github
The ROM's not there?
r.asimi said:
The ROM's not there?
Click to expand...
Click to collapse
My bad, typo, should be fixed now.
Haze028 said:
My bad, typo, should be fixed now.
Click to expand...
Click to collapse
another rom! excellent. Which kernel is in there?
cheers!
how does this relate to the att build?
---------- Post added at 02:07 PM ---------- Previous post was at 01:58 PM ----------
slayp00n said:
how does this relate to the att build?
Click to expand...
Click to collapse
So I flashed this then it tried to flash pa gapps and it said that the rom is not 4.3?
---------- Post added at 02:17 PM ---------- Previous post was at 02:07 PM ----------
I still get the same issue i had with the att build
bluetooth on > phone call > push power button instant reboot.
mathsz said:
another rom! excellent. Which kernel is in there?
cheers!
Click to expand...
Click to collapse
Just using the official Cyanogenmod kernel for time being.
slayp00n said:
So I flashed this then it tried to flash pa gapps and it said that the rom is not 4.3?
Click to expand...
Click to collapse
It's 4.3.1, I've been using banks gapps without any issue.
slayp00n said:
I still get the same issue i had with the att build
bluetooth on > phone call > push power button instant reboot.
Click to expand...
Click to collapse
Good to know, I hadn't tried the att build nor looked into it's issues. I'll see about getting a logcat and trying to dive into it once i get home today.
Haze028 said:
Just using the official Cyanogenmod kernel for time being.
It's 4.3.1, I've been using banks gapps without any issue.
Good to know, I hadn't tried the att build nor looked into it's issues. I'll see about getting a logcat and trying to dive into it once i get home today.
Click to expand...
Click to collapse
Hi Haze, any luck figuring out the reboot?
Also does your build include the LTE tethering script i sent to Pauli?
If you could share that tethering fix, it'd be nice
Sent from my Optimus G using xda app-developers app
mathsz said:
If you could share that tethering fix, it'd be nice
Sent from my Optimus G using xda app-developers app
Click to expand...
Click to collapse
http://hippowise.com/how-to-fix-lte-wifi-tethering-for-the-nexus-4/
or
http://forum.xda-developers.com/showpost.php?p=42735305&postcount=51
Is there any other kernels that will work for this? It would be nice to have under volting support. Also to note mhl is works for a bit, but its almost like the phone still locks when connected and then it only displays out a black screen.
nadrojcote said:
Is there any other kernels that will work for this? It would be nice to have under volting support. Also to note mhl is works for a bit, but its almost like the phone still locks when connected and then it only displays out a black screen.
Click to expand...
Click to collapse
New build is up....
Please install ROM then reboot before installing gapps if you're doing a clean install.
Haze028 said:
New build is up....
Please install ROM then reboot before installing gapps if you're doing a clean install.
Click to expand...
Click to collapse
Does this build include the reboot on phone call issue?
slayp00n said:
Does this build include the reboot on phone call issue?
Click to expand...
Click to collapse
I couldn't reproduce it to even look at it at all, so no.
what are the steps to creating the error?
Haze028 said:
I couldn't reproduce it to even look at it at all, so no.
what are the steps to creating the error?
Click to expand...
Click to collapse
flash clean, enabl bluetooth, connect bluetooth to car at least one time.
After this, any calls where you puh the power button to turn the screen on will cause a soft reboot
installed this and phone will not boot, nor will it take any other roms... was previously on aokp
have to fastboot into recovery, it will take both releases of this rom but they jsut go black after LG logo..
trying to put on any other rom so far (aokp / CM 10.2) cwm wont install the zip...
psycon said:
installed this and phone will not boot, nor will it take any other roms... was previously on aokp
have to fastboot into recovery, it will take both releases of this rom but they jsut go black after LG logo..
trying to put on any other rom so far (aokp / CM 10.2) cwm wont install the zip...
Click to expand...
Click to collapse
They do go black after lg logo... Then pacman logo pops up and it boots... Just give it a touch longer....
Don't install gapps with ROM.... Do it after
Lastly not sure it won't install other ROMs...?
well managaed to get it to boot again. had to format /data and start over.... wifi will scan but not connect now. what kernel should i be using.
psycon said:
well managaed to get it to boot again. had to format /data and start over.... wifi will scan but not connect now. what kernel should i be using.
Click to expand...
Click to collapse
That's also something new, I have seen my wifi go to Authenticating then just say saved and not connect. I either long press on it and choose connect or turn my wifi off then back on and it connects.
I don't have data on my phone so I rely heavily on wifi. Seems it has only happened when I'm originally connecting to my home wifi, reconnects without issue when I get home from work everyday. At work, it connected without issue and has each time since automatically. Seemed, from my experience, to only have an issue connect the first time to the first network.
Has anyone else been having a lack of wifi?
You can try another kernel if you'd like, can't say if they'd work or not as I've never tried one. Thus I'm not sure which to suggest.
Tried smoocha and att kernel from this group wouldn't boot afterwards.had to reflash the ROM.
Was able to get WiFi working By flashing latest modem file.
psycon said:
Tried smoocha and att kernel from this group wouldn't boot afterwards.had to reflash the ROM.
Was able to get WiFi working By flashing latest modem file.
Click to expand...
Click to collapse
I've had the same issue. Flashed last night and no matter what it won't connect to my home wifi though it does scan and see available networks. I'm just searching for the modem right now. Great Rom though. Everything is nice and snappy.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The latest MIUI is 4.11.17
This one is on: 4.11.17. This thread will always be one update behind so always remember to use the OTA updates!
How to Install: (Updated 10/31)
Flash back to the original stock ROM.
Root and install FreeGee for Recovery.
Install CWM recovery from FreeGee.
Download Philz Advanced Recovery
Download MIUI rom.
Download Modem.
Flash Philz Touch Recovery (PTR) and reboot back to Recovery.
Do full ROM wipe in PTR.
Flash MIUI ROM then Modem
Reboot.
Set up phone and update using OTA.
Enjoy.
Latest 4.10.31 Features since the last MIUI update in General thread.
Added NFC support.
Added LG display settings.
Added LG USB settings.
Added quick link to Service Menu.
Added casting support.
Added LG charging LED
General bug fixes.
GPS location fix in US. (Instant)
[Q] Are you a developer? Will you be able to provide support?
No I'm not, and I'll try my best!
Mainly, you'll have to depend on the support from our community much like I will be! And you have to understand that it will be a learning process for both us and we can only depend on one another for any support! So if you run into any problems, feel free to post! And if you have a solution, make sure to try and help another user out! :good:
LTE is working
anonymous007 said:
As of the 4.10.31 and up you can now easily enable LTE and make it stick by going to General Settings > Mobile Networks > Preferred Network > FDD-LTE
Click to expand...
Click to collapse
Download Links:
Weekly MIUI Download 10/31:
https://yadi.sk/d/ywRXsX_CcUQoe
(The reason I am not using the official link is because of the download speeds. It took over night to download it once. And that's not including the ~30 failed downloads. I will still leave a link to the original at the very bottom.) If you would like to add a mirror as well just let me know and I'll add it here!
Philz Touch Recovery:
http://forum.xda-developers.com/showthread.php?t=2552611
Madmack's Modem E980
http://downloads.codefi.re/madmack/GPRO/CM10_1/modem/E980-MODEM-BM9615A-CWM.zip
----------------------------------------------------------------------------------------
Official MIUI page:
http://en.miui.com/download-122.html
Special thanks to:
Literally everyone at this point. So if you exist, thank yourself.
just a question, supports Spanish language? and thanks
javi1609 said:
just a question, supports Spanish language? and thanks
Click to expand...
Click to collapse
It does not currently support Spanish. It only supports Chinese and English at this time. Sorry!
Nice, someone finally mirrored as the Chinese servers are to slow lol, but some corrections though the ROM does has LTE
Go to general settings > additional > service menu > switch the CDMA to USIM phone should force reboot > following this go back to the service menu and change the Network Mode to Global + LTE That's it.
Also there is another version that puts out updates every Friday here Download Link: http://www.miui.com/download-262.html
Original Source: http://bbs.sonyue.com/thread-96332-1-1.html if anyone can also mirror that one I'd appreciate it as I've had no luck getting it to download lol.
anonymous007 said:
Nice, someone finally mirrored as the Chinese servers are to slow lol, but some corrections though the ROM does has LTE
Go to general settings > additional > service menu > switch the CDMA to USIM phone should force reboot > following this go back to the service menu and change the Network Mode to Global + LTE That's it.
Also there is another version that puts out updates every Friday here Download Link: http://www.miui.com/download-262.html
Original Source: http://bbs.sonyue.com/thread-96332-1-1.html if anyone can also mirror that one I'd appreciate it as I've had no luck getting it to download lol.
Click to expand...
Click to collapse
I believe in order to change it to LTE, we would need the Modem to be working. Because the current one tends to freeze MIUI when changing to LTE.
But after some research it looks like you have to flash both the modem and madmacks kernel for it to work. I haven't tested it myself though but I've seen some reports of people doing that back in the General thread. And I'll try and mirror that weekly one and just label this one 'stable' for more options.
Weekly is now up. I've tested it and there should be an update this friday as well via OTA. I'll keep the OP updated a week behind so users can just use the OTA to get to the latest.
This MIUI is pure Daily Driver material. Battery life is great, good performance/features, and GPS location lock is practically stock speed (like ~5 seconds on 3G). They really worked hard on this one :good::good:
Going to test the deep sleep tonight and report back tomorrow.
Update: After flashing the modem, I got a 5% battery drain after 9 hours with Wi-Fi on. So no different from any CM ROM you'll see around here.
Wow, this is one slick getup. The way they've seperated and designed the notication area really pleases me. I'm surprised that design hasn't been ganked by other roms. Mating this with a Cyanogenmod would result in some wicked magic, for sure. CM's awful notication area always maddens me.
This makes me so hype! I'm one of those (seemingly) rare people that really likes miui and have been hoping something with any kind of support would come to the G Pro. Can't wait to flash this tomorrow. Thanks for bringing us this rom.
Question: Do I have to use PTR, or would TWRP work?
RaiderDuck said:
Question: Do I have to use PTR, or would TWRP work?
Click to expand...
Click to collapse
I just checked the official form post and it looks like it's PTR or TWRP.
Tried installing it yesterday and no bueno. It wouldn't recognize the modem, no matter what I did.
RaiderDuck said:
Tried installing it yesterday and no bueno. It wouldn't recognize the modem, no matter what I did.
Click to expand...
Click to collapse
Which model do you have, which modem did you use, and what recovery did you use. Thanks
GreatCaesar said:
Which model do you have, which modem did you use, and what recovery did you use. Thanks
Click to expand...
Click to collapse
I have an E980, I flashed the modem given in the OP, and I used TWRP.
RaiderDuck said:
I have an E980, I flashed the modem given in the OP, and I used TWRP.
Click to expand...
Click to collapse
So you were able to flash the modem and there wasn't any signal? Or did the recovery not recognize it?
GreatCaesar said:
So you were able to flash the modem and there wasn't any signal? Or did the recovery not recognize it?
Click to expand...
Click to collapse
The modem seemed to flash normally, but after I rebooted, it didn't pick up any network. "Mobile networks" was grayed out in Settings. I tried changing the CDMA settings but it FCed every time I did so and the settings remained unchanged.
RaiderDuck said:
The modem seemed to flash normally, but after I rebooted, it didn't pick up any network. "Mobile networks" was grayed out in Settings. I tried changing the CDMA settings but it FCed every time I did so and the settings remained unchanged.
Click to expand...
Click to collapse
Which carrier are you using?
And CDMA settings will FC regardless, it's one of the reasons LTE doesn't work at the moment.
Try going to Settings > Mobile networks > Network carriers and try setting that manually along with the APN.
GreatCaesar said:
Which carrier are you using?
And CDMA settings will FC regardless, it's one of the reasons LTE doesn't work at the moment.
Try going to Settings > Mobile networks > Network carriers and try setting that manually along with the APN.
Click to expand...
Click to collapse
I'm using AT&T. I'm not thrilled with Commotio (which I flashed yesterday after MIUI bombed) , so I'll try to reflash MIUI in a few minutes.
RaiderDuck said:
I'm using AT&T. I'm not thrilled with Commotio (which I flashed yesterday after MIUI bombed) , so I'll try to reflash MIUI in a few minutes.
Click to expand...
Click to collapse
You should try and use PTR just in case. Weird that it happened in the first place.
GreatCaesar said:
You should try and use PTR just in case. Weird that it happened in the first place.
Click to expand...
Click to collapse
Can I flash other ROMs using PTR? And can I flash PTR using TWRP?
RaiderDuck said:
I'm using AT&T. I'm not thrilled with Commotio (which I flashed yesterday after MIUI bombed) , so I'll try to reflash MIUI in a few minutes.
Click to expand...
Click to collapse
I'm back on CM11 but when I was using the MIUI 4.10.27 build I had LTE working, you don't need to flash a modem or anything just install normally in aroma and when you get in to the Service Menu select Mobile Networks then click the option Global+LTE and and hit the back button and the icon should change to 4G. Just ignore the changing the CDMA Subscription to USIM step as it doesn't seem to work or effect the E980 so leave it at NV.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello everyone,
With all the sweet, sexy Lollipop ROMs that have been posted lately, the one thing I noticed missing is PA.
So I built a buildbox and thought I'd do something about that.
I present to you: Paranoid Android AOSPA-Legacy (AOSPAL) 5.0 ALPHA 2 built from source for the d851.
I'll warn you: it looks pretty much like every other Lollipop ROM out there -- if you're expecting full-blown PA right now, but down the crack pipe and come back in a few months. My intent is to have a build of PA that gets in on the ground level and keeps up -- I know this project is going to be amazing once it gets going, and I want the d851 to be right on the bleeding edge (for once).
I'm very new to the git/gerrit thing, but I can repo sync like a bad mothereffer -- when significant updates are committed, I'll post a new build.
One thing I should note: look at my post count, and look at the questions I've asked. You'll notice I've been here for years and am a veteran of both Windows Mobile (from back when it was called "Pocket PC") and Android. I haven't asked a whole lot of questions because I know how to use Google and the search box. If you're downloading this ROM I'm going to assume you have an IQ in the triple digits and know how to use Google and the search box. If you post a question here that's already been answered somewhere else, it will be met with a cold, stony silence from me as I stare blankly at my laptop display and weep for the laziness of humanity. This is trial and error, folks -- and plan on there being a lot of both.
I built, downloaded to my phone, flashed it, and booted it up and it's what I'm running now. If you can't get it to boot up on your phone...well, either restore from backup or download again and re-flash, because there's nothing wrong with the ROM. Before I post any updates, I'll do the same thing.
So...if you're up to the challenge (or just want to see PA-Legacy 5.0): Welcome to the grand experiment.
#stayparanoid
Instructions:
1.Boot into recovery
2. Perform a full nandroid backup
3. Do a full wipe
4. Flash ROM
5. Flash GAPPS
6. Flash SuperSU
7. Reboot and enjoy
What's changed in this build?
Woohoo! We're now at ALPHA2 release!
Note (that means PAY ATTENTION!) -- as per this update, until further notice, when dirty flashing this ROM you MUST re-flash your GAPPS package:This comes straight from the PA main dev team. Ignore this warning at your peril!
Current Build/Logs/Other Downloads:
AOSPAL 5.0.2 ALPHA2 20150308
20150308 Build ChangeLog
PA GAPPS for Lollipop
SuperSU v2.36
AOSPAL Links:
AOSPAL GitHub
AOSPAL Bug Tracker
Viper4Android, Lollipop-specific:
ZIP file, to install in Recovery
Discussion thread concerning Lollipop-specific V4A
Previous Builds:
My AOSPAL Directory on AFH
One thing I should note: look at my post count, and look at the questions I've asked. You'll notice I've been here for years and am a veteran of both Windows Mobile (from back when it was called "Pocket PC") and Android. I haven't asked a whole lot of questions because I know how to use Google and the search box. If you're downloading this ROM I'm going to assume you have an IQ in the triple digits and know how to use Google and the search box. If you post a question here that's already been answered somewhere else, it will be met with a cold, stony silence from me as I stare blankly at my laptop display and weep for the laziness of humanity.
Bolded for attention grabbing.
Sent from my LG-D851 using XDA Free mobile app
Cool thank you a new thing to play with
purrbody sonic rukia
Probably the best OP ever created.
Yay !!
Ty!
Super fast download ?
RESERVED
flashing now!!
Teach me how to port roms bro
Here are quick screenshots of AOSPA-Legacy. Also a fast video clip.
Pretty much the same as CM 12 at the moment but im sure it will be built on!
AOSPA Legacy 5.0 ROM Video
ANOTHER LOLLIPOP ROM TO WORK WITH!!!
So its aosp? So is there same bugs like cm?
yanowman said:
Here are quick screenshots of AOSPA-Legacy. Also a fast video clip.
Pretty much the same as CM 12 at the moment but im sure it will be built on!
AOSPA Legacy 5.0 ROM Video
ANOTHER LOLLIPOP ROM TO WORK WITH!!!
Click to expand...
Click to collapse
Except this ROM has a working video camera. records and plays. the others crash when you try to stop them and DO NOT play.
OP...you should share with the others how you fixed this.
---------- Post added at 06:27 AM ---------- Previous post was at 06:25 AM ----------
But I have now had to do 2 battery pulls after the SLEEP OF DEATH
---------- Post added at 06:47 AM ---------- Previous post was at 06:27 AM ----------
Got a screen I have never seen before. Kernel Crash -Black Screen
said to press 1 to go to DL mode or press 2 to reboot.
I rebooted and TWRP'd back to PAC 5.0
I installed and it ran beautifully. Camera worked too. No sdcard support though.
Edit. Sdcard works fine after a format
rubbamade said:
Got a screen I have never seen before. Kernel Crash -Black Screen
said to press 1 to go to DL mode or press 2 to reboot.
I rebooted and TWRP'd back to PAC 5.0
Click to expand...
Click to collapse
Nothing to worry about, it's just a bug that can happen with any aosp ROMs at the moment. Just reboot and take note if it happens again. I don't think the cause has been pinpointed yet.
NewZJ said:
I installed and it ran beautifully. Camera worked too. No sdcard support though.
Click to expand...
Click to collapse
No SD card support us the deal breaker. Every 5.0 ROM has something the other doesn't lol. Its always something lol.
I don't know what this nonsense about unsupported sdCard is all about. Mine is working fine with this ROM.
Sent from my LG-D851 using Tapatalk
OP, can you share your local_manifests xml file? I built this ROM a week ago and it was pretty plain, so I didn't bother sharing it. I didn't test video though, so if it is working I'd like to see what the difference is between this and CM. :good:
Great ROM. Unfortunately, it looks like LTE isn't working. I'm stuck on H and when I go to preferred networks and switch to LTE, I lose data.
JerzyIroc said:
Great ROM. Unfortunately, it looks like LTE isn't working. I'm stuck on H and when I go to preferred networks and switch to LTE, I lose data.
Click to expand...
Click to collapse
My LTE worked fine. It might be your apn settings?
Boostjunky said:
I don't know what this nonsense about unsupported sdCard is all about. Mine is working fine with this ROM.
Sent from my LG-D851 using Tapatalk
Click to expand...
Click to collapse
It wouldn't register that my 128gb sdcard was inserted and it didn't give any kind of error or message, pressing "mount sdcard" had no results. I assumed it lacked support, I'm glad to see it works for you. I'll try downloading it again.
NewZJ said:
My LTE worked fine. It might be your apn settings?
It wouldn't register that my 128gb sdcard was inserted and it didn't give any kind of error or message, pressing "mount sdcard" had no results. I assumed it lacked support, I'm glad to see it works for you. I'll try downloading it again.
Click to expand...
Click to collapse
Ya that was my bad. I should have checked before posting. The preferred network was 3G. I switched to LTE and rebooted and LTE is working
NewZJ said:
My LTE worked fine. It might be your apn settings?
It wouldn't register that my 128gb sdcard was inserted and it didn't give any kind of error or message, pressing "mount sdcard" had no results. I assumed it lacked support, I'm glad to see it works for you. I'll try downloading it again.
Click to expand...
Click to collapse
If your card isn't formatted to FAT32, then it won't register on any of the Android L ROMs out there (so far).
Latest update: 2018-06-12 To view a changelog, you can visit https://review.lineageos.org/#/q/status:merged+branch:cm-14.1 for a rough idea up to the build date.
Hi all. I was able to compile this stock build of LOS 14.1 thanks to the efforts/hard works of Skrilax_CZ, bhb27, the folks who created RR, and those over at Lineage OS/CyanogenMod. It takes some minor features from RR (i.e. notification light, some tiny performance/battery tweaks, and the ability to install Motorola apps). It is otherwise stock LOS 14.1 and I use this daily. The other authors/devs and I assume no responsibility if you damage your device somehow.
Please don't feel pressured to update any more often than you wish .
Notes:
In order to make my calling work for Verizon, I had to go under Settings -> More -> Cellular networks -> Preferred network type, and select LTE/CDMA (not LTE/GSM/UMTS). I assume GSM users should be fine with the defaults.
Also if on Verizon, you should most likely select VZWINTERNET as your APN under Settings -> More -> Cellular networks -> Access Point Names (might not show up at first, but eventually loads)
My recommendations to install:
Install TWRP if you haven't already
3.1.1 - https://www.androidfilehost.com/?w=files&flid=39562 (forum:http://forum.xda-developers.com/mot...recovery-twrp-2-8-7-0-touch-recovery-t3180308)
Perform a backup of your current system/ROM (if coming from another ROM).
Perform a factory reset/wipe (if coming from another ROM).
Install the .zip
Install the appropriate google apps.
http://opengapps.org/. I would think nano or micro is best, ARM, and 7.1
Wipe dalvik/art cache if you install another kernel. I highly recommend BHB27 kernel
https://www.androidfilehost.com/?w=files&flid=135512
Reboot and enjoy
Here is the link to the latest ROM on the hosting website:
[2018-06-12]https://androidfilehost.com/?fid=746163614322270411
Previous Builds:
https://www.androidfilehost.com/?w=files&flid=128790
Optional Components:
Remove SU/Root: https://mirrorbits.lineageos.org/su/addonsu-remove-arm-signed.zip (Lineage OS extras:https://download.lineageos.org/extras)
BHB27 Kernel: https://www.androidfilehost.com/?w=files&flid=135512 (forum:http://forum.xda-developers.com/moto-maxx/development/kernel-bhb27-kernel-t3207526)
BHB27 Kernel Adiutor: https://www.androidfilehost.com/?w=files&flid=48767
iSU: https://www.androidfilehost.com/?w=files&flid=120360 (forum:http://forum.xda-developers.com/android/apps-games/isu-simple-app-to-deactivate-activate-t3478348)
TurboToast: https://play.google.com/store/apps/details?id=com.bhb27.turbotoast
I'll be back to post updates fairly regularly (~ every few weeks), but I also work full time in addition to being a dad (those of you who are know how that is ) and won't really be able to respond to PMs very well. The sources I used can be found under the post on XDA here at http://forum.xda-developers.com/moto-maxx/development/rom-resurrection-remix-t3511109 (device, vendor, and kernel trees). Thanks and God bless.
Nice, downloading... made changes in the kernel?
Thanks developer @calsurferpunk
hpbrasil said:
Nice, downloading... made changes in the kernel?
Thanks developer @calsurferpunk
Click to expand...
Click to collapse
Thanks. No I didn't change anything about the kernel. There isn't a good alternative (that I know of yet) so I just used it straight from bhb for now.
How do I disable the capacitive buttons and use on screen nav bar instead?
Sent from my DROID Turbo using Tapatalk
My device is showing no root on this ROM and if I install super su it gains root but shows no sim card available. Fixed by enabling root permission in development settings.
The rom is almost 100%, the battery is well lasting me .... 1 screen time every 10% quietly, the only problem I really noticed was sending images on whatsapp that is not 100%, you send catch screen and photos taken by whatsapp ... now send images from the gallery do not know why, it just outside joys and once again thank you for your development. @calsurferpunk
eddiemc12 said:
My device is showing no root on this ROM and if I install super su it gains root but shows no sim card available. Fixed by enabling root permission in development settings.
Click to expand...
Click to collapse
It's not fixing it for me. I enabled root in developer options.
What can be the issue here @calsurferpunk
Sent from my DROID Turbo using Tapatalk
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Root ok
muhammadtalha-13 said:
It's not fixing it for me. I enabled root in developer options.
What can be the issue here @calsurferpunk
Sent from my DROID Turbo using Tapatalk
Click to expand...
Click to collapse
I'm not sure what could be going on. I haven't flashed su and just use the stock CM root manager. Enabling root for apps only in developer options makes everything work for me when an app requests it. I did notice that I had to make sure that iSu was setting the policy as permissive (causes FC when set as enforcing).
If not bother you wanted to report a small simple mistake that can not encomodar only to warn even ... In Menu> Settings> Developer Options> animator duration scale, the second option is 0.5x and there is 5x....When I click on the Home screen and select background he simply FC, that's Gallery problem equal to whatsapp that has pictures not ...
The maintainer of CrDroid said I do not know how to use the Android and it really is a problem of rom and he would not listen to me and said she did not like my attitude. @calsurferpunk
calsurferpunk said:
I'm not sure what could be going on. I haven't flashed su and just use the stock CM root manager. Enabling root for apps only in developer options makes everything work for me when an app requests it. I did notice that I had to make sure that iSu was setting the policy as permissive (causes FC when set as enforcing).
Click to expand...
Click to collapse
So if I flash ROM and iSu says no root, then I just have to enable root in developer options without flashing SuperSU? I actually tried developer option after flashing SuperSU. Maybe that's why it didn't work. Let me know if I am right then I'll try the correct procedure.
Sent from my Pixel XL using Tapatalk
muhammadtalha-13 said:
So if I flash ROM and iSu says no root, then I just have to enable root in developer options without flashing SuperSU?
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
That's all that I did and I haven't had any issue yet. I didn't have to change anything with iSu either (even if I did mess with it later just to see what it does).
Just as a quick update, next time I post an updated build I believe I know how to skip including iSu and kernel auditor by default. I'll make sure to include a way to download them and include them separately if this is successful. The goal of this is to keep it as close to stock CM 14.1 and still be functional so that anything you want to add can be done by your own free will .
calsurferpunk said:
That's all that I did and I haven't had any issue yet. I didn't have to change anything with iSu either (even if I did mess with it later just to see what it does).
Click to expand...
Click to collapse
Okay got it now. I'll try again later tonight and will confirm here.
Sent from my Pixel XL using Tapatalk
no super su, i enabled root in developer setting and it works fine.
太棒了
Hey @calsurferpunk, very good job. But I have to tell u about a bug I notice. When you'll transfer a music from pc to the phone, the music player says "That's impossible to play (Name of the Music)" and in the Google Play Music the music it's with 0 seconds. The music only goes if you put in recovery mode and transfer the mp3 archive while you're at TWRP.
Hlcpereira said:
Hey @calsurferpunk, very good job. But I have to tell u about a bug I notice. When you'll transfer a music from pc to the phone, the music player says "That's impossible to play (Name of the Music)" and in the Google Play Music the music it's with 0 seconds. The music only goes if you put in recovery mode and transfer the mp3 archive while you're at TWRP.
Click to expand...
Click to collapse
It might be a bug with Play Music. I have transferred music normally and Poweramp plays it without any problems.
Shooting Star Max said:
It might be a bug with Play Music. I have transferred music normally and Poweramp plays it without any problems.
Click to expand...
Click to collapse
No man, the problem still at the music player which goes installed in the ROM.
The Bare Naked Rom
Updated for B160 Enjoy !
The name pretty well says it all - This is the CleanRom with Everything Removed
You have nothing but the Bare Basic phone - See the screen shots to see whats left in
Flashing instructions.. You Must use the version that match your firmware. (If you need to get to B150 / B160 Click here)
Copy the Bare_Naked.zip and SR2-SuperSU-v2.79-SR2-20170103215521.zip to the phones Ext_sdcard and reboot to TWRP
You must Mount - System / Cust and Data before you start the Install.
Factory Reset
Install the Rom and Install SuperSU - After install wipe cache / dalvik and reboot.
That's about it ..Enjoy!
~B160 - Download~
~B150 - Download~
Reserved
Can it be dirty flashed on top of Cleanrom or need to wipe/clean everything?
guest_2011 said:
Can it be dirty flashed on top of Cleanrom or need to wipe/clean everything?
Click to expand...
Click to collapse
it will probably flash OK but you'll still have all your garbage from the data folder
clsA said:
it will probably flash OK but you'll still have all your garbage from the data folder
Click to expand...
Click to collapse
Something i can manually delete, right?
guest_2011 said:
Something i can manually delete, right?
Click to expand...
Click to collapse
Sure but the ROM is designed to be as minimal as possible
Sent from my Nexus 6P using Tapatalk
That's what I am looking for. Thank you.
flashed this Bare Naked Rom, like it. thanks.
but where is the cellular data setting located, such as to set apn?
sxu0920 said:
flashed this Bare Naked Rom, like it. thanks.
but where is the cellular data setting located, such as to set apn?
Click to expand...
Click to collapse
settings > mobile network?
guest_2011 said:
settings > mobile network?
Click to expand...
Click to collapse
not there anymore, it is gone
sxu0920 said:
not there anymore, it is gone
Click to expand...
Click to collapse
gone? i don't have an active sim to try in xt. when i go to settings > mobile network everything is greyed out because no sim inside. i can see
Mobile data >
International data
always send and receive mms
mobile data always on
Access point names >
Search for att microcell (don't know what it is)
guest_2011 said:
gone? i don't have an active sim to try in xt. when i go to settings > mobile network everything is greyed out because no sim inside. i can see
Mobile data >
International data
always send and receive mms
mobile data always on
Access point names >
Search for att microcell (don't know what it is)
Click to expand...
Click to collapse
are you running on this Bare_Naked Rom?
after flashing the Bare_Naked Rom, mobile network is gone
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
sxu0920 said:
did you run on this Bare_Naked Rom?
after flashing the Bare_Naked Rom, mobile network is gone
Click to expand...
Click to collapse
yes this barenaked rom.
guest_2011 said:
yes this barenaked rom.
Click to expand...
Click to collapse
screenshots
https://forum.xda-developers.com/picture.php?albumid=14053&pictureid=55315
https://forum.xda-developers.com/picture.php?albumid=14053&pictureid=55316
---------- Post added at 02:02 AM ---------- Previous post was at 01:59 AM ----------
guest_2011 said:
gone? i don't have an active sim to try in xt. when i go to settings > mobile network everything is greyed out because no sim inside. i can see
Mobile data >
International data
always send and receive mms
mobile data always on
Access point names >
Search for att microcell (don't know what it is)
Click to expand...
Click to collapse
there is no att microcell, where can you find it
sxu0920 said:
screenshots
https://forum.xda-developers.com/picture.php?albumid=14053&pictureid=55315
https://forum.xda-developers.com/picture.php?albumid=14053&pictureid=55316
---------- Post added at 02:02 AM ---------- Previous post was at 01:59 AM ----------
there is no att microcell, where can you find it
Click to expand...
Click to collapse
It's under mobile network. Strange. I don't know why you don't have it. Maybe you didn't clean something before rebooting? Reflash?
guest_2011 said:
It's under mobile network. Strange. I don't know why you don't have it. Maybe you didn't clean something before rebooting? Reflash?
Click to expand...
Click to collapse
these are the steps I followed:
TWRP Mount System, Cust and Data
Factory Reset
Install Bare_Naked.zip
Install SuperSU
Wipe cache / dalvik and reboot.
I am a little confused about "Factory Reset", "Factory Reset" = "Wipe -> Swipe to Factory Reset"?
I dirty flashed, did 130 to 150, then same steps except didnt factory reset. Everything works. By dirty i mean didnt reset but lost all my apps anyway.
i have the same thing, mobile network is gone. how to fix this?
guest_2011 said:
I dirty flashed, did 130 to 150, then same steps except didnt factory reset. Everything works. By dirty i mean didnt reset but lost all my apps anyway.
Click to expand...
Click to collapse
I tried, if skip factory reset, flashing the Bare Naked Rom seemed doing nothing at all.
Also, how could it be possible that build number can be updated from 130 to 150 by flashing Bare Naked Rom?
sxu0920 said:
I tried, if skip factory reset, flashing the Bare Naked Rom seemed doing nothing at all.
Also, how could it be possible that build number can be updated from 130 to 150 by flashing Bare Naked Rom?
Click to expand...
Click to collapse
All I removed are apps
If you missing settings it's most likely hidden somewhere in EMUI
Also flashing any B150 ROM will display B150 in the settings about screen. It's part of the Local.prop.
You get problems when your phones firmware is not actually updated to the displayed version. Like no WiFi
Sent from my Nexus 6P using Tapatalk