hello,need some expert advice her, i bougth a Lenovo s850 from china and i needed a multilang. rom on it wich i found on needrom but when i was finshing flashing it it went into a bootlop and now its completely dead. is it any thing to do her or have i got my self a 200$ piece of junk
graatenbil said:
hello,need some expert advice her, i bougth a Lenovo s850 from china and i needed a multilang. rom on it wich i found on needrom but when i was finshing flashing it it went into a bootlop and now its completely dead. is it any thing to do her or have i got my self a 200$ piece of junk
Click to expand...
Click to collapse
Try to explain better! Do you have installed custom recovery?
no i installed a modified multi language rom from "needroom" did every as told and everything looked fine during the upgrade and when i was finished i got the green circle that says it was ok but when started it up it went in to boot loop and said "TOOL DL image fail!" but after a while its totally dead.,when i try now it wont load in any software into the phone ,just starts up the purple pre preparation on the SP flash tool but when i connect the phone it stops .cant get it into recovery mode or anything,just completely dead. i would rely be thankful for some advice her
Maybe the package you've tried to install is corrupted.
most likely, but is there anything to do with it or is it over for it.
graatenbil said:
most likely, but is there anything to do with it or is it over for it.
Click to expand...
Click to collapse
Most likely your device is unusable. Without any recovery, I dont think you will be able to do anything. I am sorry.
OK a 200$ experience richer , thanks anyway
graatenbil said:
OK a 200$ experience richer , thanks anyway
Click to expand...
Click to collapse
Just a question....are you able to enter fastboot?
no cant enter anything its like its out of battery,completely dead and it wont take charge ether
graatenbil said:
no cant enter anything its like its out of battery,completely dead and it wont take charge ether
Click to expand...
Click to collapse
hello my friend. I got exactly the same thing that I just tried to install TWRP. I stuck in Boot loop. solution found by disconnecting the battery. and making again the same procedure. but once I checked her DA DL All. Now how puts the battery is another story .but if I want i tell you, you need some tools that may have in your home..
graatenbil said:
no cant enter anything its like its out of battery,completely dead and it wont take charge ether
Click to expand...
Click to collapse
Question: When you connect the phone with your pc (usb cable) does the pc makes any sound (connected device sound)?
setmov said:
Question: When you connect the phone with your pc (usb cable) does the pc makes any sound (connected device sound)?
Click to expand...
Click to collapse
Same problem here. Trying to install twrp and got stuck in => FASTBOOT mode ...
The computer makes a sound when i connect the USB cable but i don't have adb connection.
How can I solve this problem?
Do I leave it to finnish the baterry and than try to start?
RE
leo_alex82 said:
Same problem here. Trying to install twrp and got stuck in => FASTBOOT mode ...
The computer makes a sound when i connect the USB cable but i don't have adb connection.
How can I solve this problem?
Do I leave it to finnish the baterry and than try to start?
Click to expand...
Click to collapse
The phone started in normal mode after the battery dryed and the phone went off.
Hi, has anyone Lenovo S850 firmware upgrade solution? Now I have resolve "DL Tool Image Fail" problem but have another problem - every rom I download touch screen doesn't work. On "original" rom (not multilanguage) touch screen worked properly. Does anyone have "good" multilanguage rom with touch screen working?
method to install original rom android 4.4.2 in lenovo s850
i have found the perfact solution to install original 4.4.2 rom on lenovo s850...so for that you have to donload rom from the link in notepad file...i have uploaded notepad file and download link is in that it is about 1.1 gb...so it will take time to download and after that what you have to do is open flash tool and then check da dl check sum and then extract the file you have download of 4.4.2 android and then in flash tool click on scater loading and browse to the the extraction location and in extracted folder there will be a folder somethinf target bin in that folder select scatter loding file of lenovo s850 and then just simply click on upgrade firware and then switch off your phone and then wait to process complete untill green circle come...and if you dont have flash tool...google it and download...thanks i hope this helps someone...:good::good::good::good:
Dear devs, help me out on UNBRICKING LENOVO S850:
Initial Problem was: AFTER TURNING PHONE ON (NORMAL BOOT UP) IT GOT STUCK ON BOOT LOGO.
Very first tried solution: PRESSING BOTH VOL.+POWER PHONE WENT IN LENOVO RECOVERY MODE. THEN I TRIED TO FUSE FORMAT BUT IT FAILED TO FORMAT. PROBLEM REMAINED SAME.
Second Tried Solution: DOWNLOADED OFFICIAL STOCK ROM (A. Lenovo_S850_VIBEUI_V1.5_1419_2_ST_S850_4.4.2 B.Lenovo_S850_ROW_S211_140923 C. Lenovo_S850_ROW_S207_140814. D. Lenovo S850 official firmware flash file) + ALL AVAILABLE SP FLASH TOOLS + USB VCOM DRIVER FOR MEDIATEK AND INSTALLED DRIVERS.
USING ABOVE FILES I TRIED TO DOWNLOAD ALL ROMS WITH DIFFERENT SP FLASH TOOLS VERSIONS BUT ALL THE TIME RED BAR CAME TO 100% THEN BAR STUCK ON 0% FOLLOWED BY ERROR "SDMMC WRITE FAIL".
THEN I TRIED UPGRADING FIRMWARE, SAME AGAIN IT GAVE ERROR "FORMAT FAILED"
THEN I TRIED TO FORMAT USING FLAH TOOL (ALL VERSIONS) AGAIN IT GAVE SAME ERROR "FORMAT FAILED"
crazy
ur cable problem pp
Hello,
can you please help me bring my LG G2 D802 back to life?
I had problems with GPS on LG G2 D802 4.4.2 so i tried to go to 4.2.2.I had some experiences with flashing from previous phones so I though I will be able to perform also this one.
I followed http://forum.xda-developers.com/showthread.php?t=2797190.
I stopped on 61% on mobile and 53% on tool. Then i used official LG tool, to recovery, but it stopped on 31% or so. Then i used different FW - with this i could get on 100% mobile - but only 89% on LG flash tool. Then I download official LG firmware according IMEI, but unfortunatelly I was again not successful and was not able to get into download menu. When i connected my phone to PC, i got many pop up windows asking to format many various disk on phone.I was not able to get into recovery mode to perform HW reset.
So i decided to to use instructions from: http://forum.xda-developers.com/showthread.php?t=2582142 with help of mine who is Linux expert.
After this I again get only LG logo when i start phone, and im able to go to recovery mode. I also can start HW reset, but it is doing nothing, just showing: performing hw reset. When I connect phone to PC even that it is switched off (it looks like that) it starts and stop on LG logo, but PC cannot see it. Also it sems, it cannot be found under linux as well.
Please help me.
Thank you very much
Tomas
please help
hello, please anybody help me. Currently when i connect mobile to PC/Mac it is not recognized. Is there some way how to solve this?
many thanks
Tomas
Hi,
So today suddenly my phone restarted and after that it was stuck on the micromax logo, I coudnt get into recovery either. So I tried to flash the stock kitkat rom using sp tools, it did manage to flash it the first time but the phone after that wont start at all, nothing not even the charging screen.
Is it bricked for good? I tried to flash it again but if I choose firmware upgrade or download+firmware upgrade in sp tools I get the pmt info error. Is there any way to get the phone back to a working state? Any help would be much apprecited.
Note: I did look through the old post on the similar topic where the guy managed to solve the problem by using a latest version of sp tools, Im already using the latest version , no dice.
Did you get anywhere with this to unbrick the device as I have similar with a GDP XP and it wont now boot or show charge its just dead!
Any help on fixing this would be great as we cant be alone with this. ATB
Hey guys,
So my canvas a1 died after I flashed the stock kitkat rom on it using sptools coz it was stuck at the micromax logo. It has been a while since and Ive gotten a new phone but in last attempt to see if it is recoverable or scrap I'm posting this.
The Problem:
-Phone is completely dead wont power up or charge but is detected by sptool, so cant into fastboot or recovery mode.
- Windows detects the phone too with a notification sound and then says usb devices connected is not recognised
-I can still flash all+download using sptool I tried both Lollipop as well as stock kitkat roms,still its the same dead.
-If I try to use firmware upgrade in sptool I get this error: proinfo: failed to get PMT info
I've looked at quite a few threads and forums to no avail.If any one knows a solution to the problem it would be much appreciated.
Hi All,
Please help me My device is bricked when Flashing Lolipop 5.1.1 ROM in Device using "SP Flash Tool"
Current Condition...
is that I am not able to start Recovery mode in device because it not get power on, even not indicating Charging while plugin.
- But I getting Sound while plugin it with my computer but not displayed as drive.
- I think still it might has pre bootLoader.
- I also checked it in Device Manage in my computer it shows there but it attached and detached automatic continueeee.
Your Suggestions and help would be appreciated.
What Happen Previously With device.
1.) when i had getting continuous Force stop in play services with my 5.1.1 stock ROM and one day device was bricked i got SP Tool and find out KitKat 4.4.4 ROM along with it. Follow steps and done.
2.) In Flashed ROM getting Same problem and installed Flash ROM 2 to 3 times in Couple of months than after take the system update of 6.1.1 and after couple of weeks continuously same problem with play services.
3.)Once i tried with Lolipop 5.1.1 with SP tool and than after device is Bricked
You should flash the stock rom using sp flash tools. That might solve the problem.
You should flash the stock rom using sp flash tools. That might solve the problem.
Thanks for reply
I have been done this things too couple of times but nothing happen,
Please suggest any alternative...
Govind23 said:
You should flash the stock rom using sp flash tools. That might solve the problem.
Thanks for reply
I have been done this things too couple of times but nothing happen,
Please suggest any alternative...
Click to expand...
Click to collapse
If SP tools is not working then Only alternate is the service centre.