Related
Hello All,
I know that I want a PET or other glass-like screen protector. Generally speaking, I never used screen protectors because they never really held up all that well and on top of that they never had the feel or look of the real thing. Now I have a scratch on my screen that is not normally visible, but I know its there.
I have run into a debacle because I know that while I am good at putting on screen protectors, I am no expert and the PET ones are harder to get perfect than the rubbery ones (which I now despise). So, recently I have seen that there are some PET/Silicone/ Electrostaic Hybrid screen protetctors and then there are still the PET with Adhesive.
Does anyone have experience with the electrostatic type and how good are they at staying on and bubbles?
I have no idea what is PET, or the different types. However, if you are talking about the one I got:
http://www.handhelditems.com/crystal-clear-screen-protector-p-135710.html
my experience is that this has great clarity, can get bubbles during applications, and they rarely come off by itself. On the many devices I've used this type of protector on, only one came off. It started in one corner, and over the course of a month with gradual lint build up the screen protector eventually got ruined. I could've washed it and reapplied for that month, but I had a spare so I was lazy. You can reapply the protectors as needed to get the application right. The bubbles that occur aren't the same as the rubbery kind. Air bubbles can easily be pushed out after application. The problem is dust that prevent the protector from adhering to screen, causing a little bubble. If the dust is really small, the bubble goes away over a day. Or, like me, you can live with it. You try getting something the size of an iPad dust free.
Bought Electrostatic - LOVE THESE!
Ok, as a preface I have owned and used screen protectors before.
I had an iPhone before the EVO and used the Griffin Ultraclear hard Protetctors ad the PowerSupportUSA products of every variety on my previous iPod products (iPod Mini 1G, 4G, Nano 1G, 5G, Shuffle 1G, Touch, iPhone) not to mention an invisible shield one or two. I gave up on the films towards the end of my Touch ownership. They always felt horrible and I could never get one absolutely perfect (didn't help that they usually were not perfectly cut).
For the Evo, I tried the InvisibleShield the first day because I remembered just how well the InvisibileShield had held up on my 5G. Well I think that they have changed the formula, or rather that 3M has since then because the smooth feel and smooth look of the original are most definitely gone. The new variety is rubbery (even after days of use) and is not cut well enough to be a perfect fit (it never covered edge to edge). So i skipped it. Well it seems that with this large of a glass screen, you are much more liable to getting scratches (versus using and unprotetcted iPhone/Touch screen) and I got a few ultra hairline ones that are barely if ever visible to the naked eye and just knowing that they are there bothered me. So I needed to think of getting a screen protector.
Seeing as how air moves and its nearly impossible to get a screen protectors on without any bit of dust, I decided on getting the electrostatic variety so that I could rinse if it came off or needed to be reapplied.
I bought These: Electrostatic Screen Protector - Clear Hard
- Hard variety (PET)
- Very Clear
- Silicone Layer (helps the scratches and dents heal themselves and give sturdiness to the PET)
- Electrostatic layer (holds the screen protector onto the phone)
Six pack delivered for $4? I could do much worse.
Well as it turns out, they are PERFECTLY cut and cover every inch of screen and no more. It went on smooth as butter and I got no bubbles or dust or fingerprints or anything (used a credit card to smooth it down). These were by far the easiest I have had. Not only that, but the electrostatic holds on just as strong as the sticky variety and will not get the gunk on the sides sticking to it! I have taken my TPU case on and off a bunch and had no lift whatsoever. As a bonus, THEY SHOW FINGERPRINTS MUCH LESS THAN THE GLASS SCREEN DOES!
So at $0.65 each, they are killer and having a few backups is nice as well as giving one to a friend.
Cheers!
Thanks for that post. I'm expecting my EVOs (I ordered 2) in within the next week. I've been trying hard to find cases and screen protectors without much luck, but I'm going to go ahead and order those screen protectors you mentioned since you recommend them.
Yep i ordered the same ones and love them. i have loved these from the start. they are quite easy to put on and stay on well.
Scotch tape is your friend in getting screen protectors on without a bit of dust
Childofthehorn said:
Hello All,
I know that I want a PET or other glass-like screen protector. Generally speaking, I never used screen protectors because they never really held up all that well and on top of that they never had the feel or look of the real thing. Now I have a scratch on my screen that is not normally visible, but I know its there.
I have run into a debacle because I know that while I am good at putting on screen protectors, I am no expert and the PET ones are harder to get perfect than the rubbery ones (which I now despise). So, recently I have seen that there are some PET/Silicone/ Electrostaic Hybrid screen protetctors and then there are still the PET with Adhesive.
Does anyone have experience with the electrostatic type and how good are they at staying on and bubbles?
Click to expand...
Click to collapse
I have a steinheil ultra crystal protector on my EVO, and its static. As long as you make sure there is no debris under it, it will stay on for a long time with no lifting. I have shown my phone to quite a few people, and not one of them can tell I have a screen protector on it. Even when I point it out to them, they still cant see it. It's very thin and I applied it perfectly so their a no bubbles. Took me about 30 minutes to get it perfect. If you use a piece of scotch tape to pick up debris under it, that works pretty good. This biggest thing is to make sure your edges are perfectly clean. Even the slightest bit of debris under one of the edges of the screen protector, and it wont be long before it starts peeling. I'm very satisfied with my steinheil. Going on 5 weeks now and it looks flawless. Id take a picture but you wouldnt be able to see it anyways. I thought it was a scam spending $13 on a screen protector! I used to order them from china for 50 cents. well, never doing that again! I've only ever used 1 adhesive type screen protector, and it was terrible. the clarity was awful.
OneStepAhead said:
I have a steinheil ultra crystal protector on my EVO, and its static. As long as you make sure there is no debris under it, it will stay on for a long time with no lifting. I have shown my phone to quite a few people, and not one of them can tell I have a screen protector on it. Even when I point it out to them, they still cant see it. It's very thin and I applied it perfectly so their a no bubbles. Took me about 30 minutes to get it perfect. If you use a piece of scotch tape to pick up debris under it, that works pretty good. This biggest thing is to make sure your edges are perfectly clean. Even the slightest bit of debris under one of the edges of the screen protector, and it wont be long before it starts peeling. I'm very satisfied with my steinheil. Going on 5 weeks now and it looks flawless. Id take a picture but you wouldnt be able to see it anyways. I thought it was a scam spending $13 on a screen protector! I used to order them from china for 50 cents. well, never doing that again! I've only ever used 1 adhesive type screen protector, and it was terrible. the clarity was awful.
Click to expand...
Click to collapse
Have not seen these yet. where did you get yours and do you know if they offer an anti-glare
xlrdxrevengex said:
Have not seen these yet. where did you get yours and do you know if they offer an anti-glare
Click to expand...
Click to collapse
Their anti-fingerprint screen protector is also anti-glare per the product description on their website.
http://www.sgpstore.com/product_info.php/cPath/23_33/products_id/1463
remedy22 said:
Their anti-fingerprint screen protector is also anti-glare per the product description on their website.
http://www.sgpstore.com/product_info.php/cPath/23_33/products_id/1463
Click to expand...
Click to collapse
thanks for the link. Can anyone find this brand cheaper
xlrdxrevengex said:
thanks for the link. Can anyone find this brand cheaper
Click to expand...
Click to collapse
I don't think so.
But these are $13 well spent. Believe me.
~fb
Hey guys, I'm having trouble finding any brand left that sell tempered glass for this phone.
The only one I found is XGear, base on the image I am certain that the designed is by having the adhesive stickers on the bezel/edges only, while the viewable area isn't adhesive. I have used tempered glass of similar design before and it is terrible. Since the adhesive stickers are thin on the edges, its not very durable and can leave gaps or pop out (especially since this is a curved screen), and let water in. It will also cause "rainbow effects" due to the gap between the two glasses. There are Amazon reviews that reflected my concern.
I'm looking for something like this which have the entire surface being clear and able to stick.
Doesn't seem like there are any available, but I wouldn't mind using tempered glass for another phone model that could fit on the Nexus screen, I think that's the best way to go. But I won't receive my Nexus in a few days, then I can see if the screen protector of the Moto X fit inside the Galaxy Nexus screen.
Bought a Nillkin Tempered GLass for my Note 3. Guess what.....after a month, the screen cracked by itself! I'm very sure it was not caused by wrong handling nor impact. All this 9H hype by Nillkin is just bull! Choose another brand!
Well I just decided to order a second i-Blason for the Moto X and put it on the Nexus. Kind of awkward, but it work. Couldn't fully stick because of the curved glass though, but the adhesive is durable enough so I'm not worried.
eksasol said:
Well I just decided to order a second i-Blason for the Moto X and put it on the Nexus. Kind of awkward, but it work. Couldn't fully stick because of the curved glass though, but the adhesive is durable enough so I'm not worried.
Click to expand...
Click to collapse
Was gonna buy the xgear thanks for the insight!
Galaxy Nexus
ROM: SlimKat 4.4.2
funny how purchases get based on "user" reviews. i read all 12, and the bad reviews remind of typical users that don't read directions, don't follow directions and then think if they pitch a fit with the manf and bad mouth the product they'll be redeemed of their stupidity.
dust under the screen or lifts at the curve?
1. poor cleaning prior to affixing
2. repeated removing and reapplying and failing 1.
it cracks? really? it's glass, treat it as such and pay attention to 1 & 2 above.
install tip: align and start from one end. it's not a bumper sticker, do not apply it as such.
dots and rainbow? if turned off and angled just right you can see it. turn it on and they're gone. the rainbow kind of reminded of how some windshields look while wearing polarized sunglasses.
i mostly lurk these forums but couldn't let this go. i've had my xgear tempered glass protector on for 2yrs without issue. i will buy more from them if available and my device doesn't have gorilla glass.
well worth the $30+ i spent at the time, has saved my phone too many times to count.
I'm also looking for a tempered glass that is different from Xgear...
I just installed an xGear Fantom (and just replaced my broken screen), I don't see any rainbow effect. I did notice that the protector at the sides sat flat against the screen, but were it curved it bowed out in the center. Looked clear, but definitely was not flush against the glass. I put a thick sock on the screen and some weight over top of it (a thick heavy hard cover book and a medium sized socket set), and that eliminated the bow and put a massive rainbow bubble into the middle of the screen. I lifted the top right corner of the protector slightly and the bubble moved straight out on it's on. It now sits 100% flat. I don't notice any loss of touch sensibility. As far as I can tell, this is going to work well, and last a loooong time.
Sent from my Galaxy Nexus using XDA Free mobile app
xGear Fantom is expensive to me and it has bad critics. I'm trying to find another alternative although it is to another model of mobile with the similar screen's sizes 135.5 x 67.94 mm and the holes fit well. The Moto X's screen seem too small.
I think only xGear makes a tempered glass protector for the G'nex. Might be able to use one for another model, but I don't think it would work any better and you would have a higher chance of running into poor fitment.
But I do understand what your saying - some G'nex have a sensitivity bug that the xGear exaggerates (I'm lucky I don't), while some people have had problems with the glue giving out as well as sensitivity issues not related to the bug.
I'd think you could run into those issues with any brand of glass screen protectors, and further might run into other issues with fitment if the protector is for a different phone.
I can't say if I'll have adhesion issues (and so far nope - but only been barely a week or so since installing it), though I think I would have both if I had not noticed and taken care to eliminate the slight bulge out where the glass curved.
Mine did lay flat at the sides along the protectors boarder, and while it was clear for viewing the screen (as in it didn't look like I had air trapped under the protector), it was clearly bulged out (due to an air pocket) a few mm in the center of the screen where it naturally curves when viewed from the side - I was able to correct that with the weight and slight lifting of a corner.
Sadly, you may want to run your naked (no protector) or with a PET film protector.
Sent from my LG-D852 using XDA Free mobile app
BTW - I only paid something like $11 (Canadian) for my Fantom, and that includes shipping. I don't think it was a huge expense at all.
Sent from my LG-D852 using XDA Free mobile app
I think it's not necessary to use any kind of screen protection.
I have my GNex more than 2 years without using screen protector and it doesn't have any scratches
I bought a tempered glass protector ( Moto X) to my Samsung Galaxy Nexus
Unfortunately I did not find any that fit perfectly but it work rigth to me.... it was very cheap in aliexpress, only 1,60€ :good:
Firstly, I have read through many of the threads existing on protectors.
When I checked YouTube to see if there were any videos comparing screen protectors for the OPX there were none, so I watched a video comparing 4 screen protectors for a different phone. Of these Armorz and Bodyguardz protectors seemed to come out on top, and survive the strenuous tests the videomaker put them through. It seems neither of these brands make protectors for the OPX.
Next I searched this forum and read through many of the threads on the different screen protectors. For as many people that promote the different protectors, there seem to be as many if not more detractors, complaining of rainbox effect, the protector fitting one OPX but not another, air bubbles, etc.
I ordered my OPX today, and I intend to order a Spigen OnePlus X Case Rugged Armor Black but I was hoping to compliment that with a screen protector.
I was hoping to order the best protector, that will fit my OPX, no rainbox effect, and that will not cause any isue with the Spigen Case - does this exist?
Simple answer is it depends on luck.
I have tried several including 1+, Nillkin, generic, full cover... None of them are perfect, if you go for any like the official 1+ one where only the display is covered you may end up with horrid air bubbles around the cover, many people complained of this-I only know of one guy who done it flawlessly. The plus side of this is that cases will fit fine. The full cover one is the best one I've tried, though it has a rainbow effect in the middle of the screen which can be seen under bright light conditions or on a white screen. This screen protector doesn't have any air bubbles and fits great, only downside is the rainbow, some cases should fit fine e.g. I use the Nillkin frosted back cover which fits without issue.
For me the small rainbow is something I can deal with unlike the air bubbles around the whole display which were an eye sore, you'd be lucky if you didn't get any. So it is hit and miss tbh, just trial and error, I wasted a good £20 on protectors for this phone, which is something I'll never do again.
In the end I ordered from Amazon:
OnePlus X Screen Protector,Nillkin®[Anti-Explosion ][With Camera film][With Back Protector]Amazing H+Pro 9H Tempered Glass Screen Protector for OnePlus X
You mention the protector you use covers the whole phone, but the thing is that I also want the added protection of the Spigen OnePlus X Rugged Armour.
Accepting that they all have flaws, as I can probably still cancel my order and change it, and considering I want front screen protection AND the Spigen Rugged Armour case, do you think I would be better with a different protector than the Nilkin?
*Air bubbles are the main thing I wish to avoid, I could live with a Rainbox effect, once it is only visible from certain angles etc.?
It is a real shame there are non more protectors, I really was sold on Bodyguardz or Armorz protectors after watching the videos where they were tested, and was disappointed to discover they do not make protectors the OPX. I am guessing they do not think there is enough of a market to make it worth their while.
I had a look at the case and it seems that the Nillkin one is probably your best option, as the case covers the sides and slightly overlaps on the front-full protector covers the whole front so you may get issues with it.
Have a look for yourself, here is the one I bought (and currently use):
http://www.ebay.com/itm/281856280418
This is the issue, you could risk bubbles and use the spigen or avoid them, live with a rainbow and use another case. It's down to luck, you may not get any bubbles or rainbow depending on which one you use.
The first sentence in your reply is not so clear, you are saying the Nilkin it is the best option although I may still have issues with it?
I ordered the protector you linked to on eBay about a week ago, but it will take a few weeks to get here!
I do have my Nilkin H+ protector here, my Spigen Rugged Armor case, and my OnePlus X arrived about 15 minutes ago
I want to try apply the Nilkin cover right away - I will post picture for others - but what is the best method? I read somewhere on the forum that we should make sure to use the 'x method', but I cannot remember what x is?
The full cover protector covers the whole front, I mean edge to edge, so the case may not fit-it may conflict with the glass. The Nillkin one only covers the display/screen not the side edges/bezels so you will have no issues with the protector and case.
I have never heard of the 'x method' so don't know, but the best method I have used is with tape or alignment stickers (your protector may have came with them). So you carefully align the protector with the display, apply the tape so it stays in place, remove the film and just close the protector (like a book), apply some pressure in the centre and leave it for a few minutes. Oh and make sure there isn't any dust before applying the glass, use a microfibre cloth to clean.
Also, just to clear things up-you may have issues with the full cover glass protector (not Nillkin-I gave the ebay link previously), the only issue with the Nillkin one is that if you botch it, you will have an air gap around the whole glass. Though if your lucky you may not.
I think this is the x method:
Chris.nl said:
I'm happy with it. The glass feels better then the plastic stock one.
Use the 'hinge method' to apply the screenprotector.
Click to expand...
Click to collapse
Though I haven't tried it myself.
Please upload some picture of your result when you are done
Used hinge method, still got the rainbow effect. I tried unhinging it a few times and cleaned both the screen and the protector and places it back on but there was always a rainbox effect - the last time I tried removing it the protector cracked
I was suspicious at the time when I tried installing the Nilkin Screen Protector, the plastic film removable cover of the protector was on the OUTSIDE of the tempered glass!!!!
WTF!
I know it was on the outside, and not the inside, because the holes in the glass for the front ear speaker and front camera would only line up when the film cover was on the outside, that is facing me as I looked down at the phone. This was the first tempered glass screen protector I ever tried to install, so I assumed I must be mistaken and continued trying to install.
From the videos I have looked again, it seems that this film cover should always be on the inside of the protector (before being removed), that is, on the side of the tempered glass that will be touching the screen of the phone?
Thanks, yes that is the method, see my comments on how it did not work and how I think they somehow sent me a screen protector with the film cover on the wrong side.
xx
As you can see the plastic film protector is on the wrong side of the tempered glass, well, if you want the holes for the speaker and camera to line up!
http://i.imgur.com/VJU5LC7.jpg"]http://i.imgur.com/VJU5LC7.jpg
Yeah, the film is on the inside, the side that attaches to the screen, peeling the plastic sheet off exposes the adhesive bit which sticks to the glass. Just saw the pictures, bad luck man. I got through like 3-4 protectors before settling-if that makes you feel better.
Then I am not losing my mind! Did you see the picture I posted?
Amazon are refunding me at least. I hate that I could not apply a protector to the brand new screen.
Like I said before, I have ordered the one you recommended but it will take some weeks to arrive, and I think you said it will not fit with my Spigen Rugged Armor case anyway.
Can you recommend any others and I will order now? I am in Ireland so possible options are Amazon UK or ebay, though I guess I can order from anywhere really.
As this device is relatively new (only a few months old) there are not many variations of protectors available. As far as I am aware there is the Nillkin type which covers the screen only and the full cover which covers the whole front. I got the ebay one in about a week (China to London), I chose standard delivery (its free and faster than economy).
Check the image in my post here: http://forum.xda-developers.com/showpost.php?p=65705849&postcount=37
That is the full cover one, I had an issue and got it replaced, now it only has a slight rainbow-but I can live with it.
TIFU - I did not realise the second smaller hole in the Nilkin tempered glass was for the proximity sensor, the camera has no hole...
Okay. Here it is. We can start the debate soon about which screen protectors actually work on this phone without Halo and bubble issues. It is always an issue with these curved glass screens but there are always 1 or 2 screen protectors that people can get to actually work. Please post which ones you have purchased and how well they worked.
Posting without pictures is not helpful to anyone.
Ordered the ones through Amazon from Mr. Shields and the case/protector from HanhuaTech. The Mr. Shields order gave me 3 and all 3 were nothing but bubbles. Never used their stuff before and highly disappointed. The latter was a nice case, but the screen protector has a black ring around the edges and is impossible to line-up so it doesn't cover the edges of the display area. No bubbles though. Just cut off part of my screen. Still looking. The Otterbox Defender does not include a screen protector.
I tried those Mr shield protectors with my v30 and they were garbage.
The supershieldz worked well with my v30 but the v40 version has that stupid black border which means it only has adhesive at the edges and will have the rainbow effect
Guess we're all screwed for a bit. For what this thing costs, I refuse not to have the tempered glass protector, but they all have the black ring or bubbles. Early adopter blues I guess.
Curved screens, like the V40 (and pretty much every flagship phone) have tend to have poor tempered glass adhesion, in my experience. It seems they all utilize only adhesive along the outer edge, leading them to come unstuck extremely quickly and easily. All of the reviewed models on Amazon, likewise, have this problem. Hopefully a good one will come out for this phone at some point reasonably soon.
I know that T-Mobile tried to sell me an overpriced one when I purchased my phone, though I'm not certain they had any in stock yet. If no models come out that stay stuck pretty well, I will take purchase one of theirs, as they will replace it every time I come in the store.
Be patient and wait for IQ Shield LiQuidSkin, best on the market for curved screens. Available mid Nov.
I quite enjoy the bodyguardz one I got. It's aluminosilicate like gorilla glass and does have the black border, however I've seen 0 rainbowing. Also comes with lifetime replacements which I will probably thoroughly abuse.
I just ordered a set right from their website. It didn't list that it wasn't in stock and ready to ship, so we'll see!
Don't rush! The earlier you get it, the bigger the risk it's not properly tested yet (especially when it comes to curved screens). This early after release, you're the guinea pig...
While I'm waiting for "IQ Shield LiQuidSkin" I ordered "PULEN Screen Protector"... I'll keep you updated!
I ordered the Poetic tempered glass screen protector. Works like a charm. 3 Days and still sticking no problem. No halo, rainbow effect, etc. Absolutely loving it. Fit is amazing and the feel is as good as the original glass, if not slicker. I'm using it with a Ringke Fusion-X case and they work perfectly together. The screen protector is case friendly and the gap between the glass and case is very minimal.
https://www.amazon.com/gp/product/B07HNNBJLC/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
nyttliv7 said:
While I'm waiting for "IQ Shield LiQuidSkin" I ordered "PULEN Screen Protector"... I'll keep you updated!
Click to expand...
Click to collapse
I know PULEN hasn't got very good reviews, but for now, while waiting for LiQuidSkin, it's all good, fits almost perfect. Nothing I recommend though. The black frame covers a faction of the visibility of the screen (left and right side)
But totally OK. Let's see if it falls off before I get my LiQuidSkin?
tveith said:
I ordered the Poetic tempered glass screen protector. Works like a charm. 3 Days and still sticking no problem. No halo, rainbow effect, etc. Absolutely loving it. Fit is amazing and the feel is as good as the original glass, if not slicker. I'm using it with a Ringke Fusion-X case and they work perfectly together. The screen protector is case friendly and the gap between the glass and case is very minimal.
https://www.amazon.com/gp/product/B07HNNBJLC/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
I was just looking at the poetic glass on Amazon and can't seem to find a good enough review that specifies it the tempered glass fully seals to the device or only seals around the edges of the glass?
Just heard from Whitestone email support that they do not currently plan on producing Dome Glass for the V40... real shame. Maybe some other V40 owners can chime in to pique their interest?
I was also just looking at the Poetic before I came over here, and also wonder if it is in fact full-adhesive. Anyone?
justinkerng said:
Just heard from Whitestone email support that they do not currently plan on producing Dome Glass for the V40... real shame. Maybe some other V40 owners can chime in to pique their interest?
I was also just looking at the Poetic before I came over here, and also wonder if it is in fact full-adhesive. Anyone?
Click to expand...
Click to collapse
I've been looking at that but but I'm in high doubts it's full adhesive
I just installed the Poetic tempered glass from Amazon and it has a massive rainbow effect. There clearly isn't any adhesive in the middle. Until someone makes a decent one it will have to do.
Blown 89 said:
I just installed the Poetic tempered glass from Amazon and it has a massive rainbow effect. There clearly isn't any adhesive in the middle. Until someone makes a decent one it will have to do.
Click to expand...
Click to collapse
Dang, it seems so difficult to find good tempered glass screen protectors. Poetic seemed promising but glad you confirmed it is not full adhesive, since so many brands don't specify.
nyttliv7 said:
I know PULEN hasn't got very good reviews, but for now, while waiting for LiQuidSkin, it's all good, fits almost perfect. Nothing I recommend though. The black frame covers a faction of the visibility of the screen (left and right side)
But totally OK. Let's see if it falls off before I get my LiQuidSkin?
Click to expand...
Click to collapse
Update!
Amid medium level reviews on Amazon, I have to say I'm surprised this pulen sp is working so well. Some kind of drier than normal glue, covers the whole sp, and if you place it perfectly, it's actually a very nice sp. The black frame slightly covers (1/10 of a mm) of left and right sides, but it really doesn't take away anything, not even the screen off blue notification around the frame. I'm not sure about the physical strength though. I'm a very careful person, never really drop my phone. No rainbow! No dust stuck around the borders. Right now I'm not sure I will order the liQuidSkin? I'm happy with this one
Folks, whitestone dome for LG V40 available for sale @ Amazon :
https://www.amazon.com/dp/B07JQT17Q4/ref=cm_sw_r_em_apa_gAR5BbVS4BYDV
I'm using Key liquid glass screen protector. I can't stand the film protectors so decided to use this. It's a wipe on application, scratch resistant, 9H superior hardness rating, water proof and anti bacterial. Just clean the screen with the included cleaning wipe than apply the liquid screen protector via the included wipe. Let sit for about 5 minutes and you're set.
There's been a lot of discussion about the screen protector on this phone. Removing it, not removing it, replacing it, etc. I bought my ZF2 second hand, and the previous owner had already removed the factory screen protector, so part of that decision had been made for me. He had replaced it with a matte screen protector, inside and out.
Honestly, I TRIED to get used to it. I WANTED to like it. It felt nice and there were no fingerprints. But if you watched a movie, it looked like an 80s VHS bootleg copy.
So I removed the screen protector and could instantly tell why people love this phone naked. The screen is genuinely beautiful. But I just can't take a chance at scratching it, so I replaced both screen protectors with the Gobukee screen protector.
https://www.amazon.com/dp/B08KRXVXFT/ref=cm_sw_r_cp_apa_fabc_EiwZFb0ZWH70Z?_encoding=UTF8&psc=1
Installation is a dry installation, and is very similar to the Ringke Easy Dual screen protectors, but instead of the whole thing being sticky, there's only a strip that sticky to align it. I actually prefer the Ringke method, as it removes dust on the whole screen as you align it, but fortunately I didn't have any dust issues with these when installing.
Like all dry install TPU screen protectors, I had some bubbles after installation, but after 24 hours they were all gone, and I was left with a perfectly clear and smooth surface. Maybe not as smooth as glass, but it's very, very close. I'm not sure if I would be able to tell the difference between this and bare glass.
It's still a bit of a fingerprint magnet, but comparing it to the demo unit at Best Buy, which still has the factory screen protector, this one is MUCH better at repelling fingerprints. And it seems easier to clean as well. And it definitely feels much better.
As a bonus to an interior and exterior screen protector, it includes a skin for the back glass and the hinge. The hinge skin is just almost invisible once installed and doesn't affect the folding action at all. I haven't used the rear skin, as the previous owner installed a matte rear skin, which I actually prefer on the back glass.
If you're on the fence about removing your screen protector, because the factory one is terrible, but you still want protection, I can highly recommend the Gobukee screen protector.
This was NOT a paid/sponsored review. I just wanted to share my experience and hopefully help others.
When this screen protector wears out, I will likely try the Ozero, since it gets pretty decent reviews.
With you on this one...just installed the front and inside and they are way better than the factory installed ones and are not at all rubbery like the factory. I loved not having the screen protector on but these are as close to not having in on there as possible.
imapfsr said:
With you on this one...just installed the front and inside and they are way better than the factory installed ones and are not at all rubbery like the factory. I loved not having the screen protector on but these are as close to not having in on there as possible.
Click to expand...
Click to collapse
I agree. I really like it. I've been using these TPU protectors for a while on my other devices. I've used them on the S10+, Note 10+, Note 20 Ultra, and now this device. I usually use the Ringke Easy Dual protector, but it's not available on the fold yet. But I'm convinced they're all mostly the same, just different brand and packaging.
I bought this screen protector for my fold but unfortunately my experience of it was poor. Its a shame as the install went perfectly because unlike two other brands I tried, the Gobukee is actually designed specially with the Fold in mind. What I mean by that is the two halves you remove before the protector sticks to the screen (as in tab 2 and 3) run parallel to the fold crease. This means you can push the squeegee and therefore the protector into the crease.
Honestly, the install was great and I was thrilled to finally find a protector for this device that wasn't poor. Unfortunately my hype was short lived as after having the device folded for 5 minutes, the protector developed a clear band of purple and green tinting where the crease is. You'll have to excuse the poor picture quality as I only had my work iPhone 7 to hand.
Did you not experience this?
Mekrel said:
I bought this screen protector for my fold but unfortunately my experience of it was poor. Its a shame as the install went perfectly because unlike two other brands I tried, the Gobukee is actually designed specially with the Fold in mind. What I mean by that is the two halves you remove before the protector sticks to the screen (as in tab 2 and 3) run parallel to the fold crease. This means you can push the squeegee and therefore the protector into the crease.
Honestly, the install was great and I was thrilled to finally find a protector for this device that wasn't poor. Unfortunately my hype was short lived as after having the device folded for 5 minutes, the protector developed a clear band of purple and green tinting where the crease is. You'll have to excuse the poor picture quality as I only had my work iPhone 7 to hand.
Did you not experience this?
Click to expand...
Click to collapse
Not at all. I literary can't tell the protector is there.
Plus, mine didn't split parallel the fold, it actually split perpendicular to it. Also mine has a hole punchout for the camera. Either you're using a different brand, or a different iteration of it.
On mine, you removed the back sheet, which exposed a slightly sticky strip on the screen protector that ran left to right and was located in the upper half of the protector, if I recall correctly.
Once it was aligned, you removed a second bottom layer, exposing the real screen protector adhesive. This was done in two halves as you said, but the splet ran side to side, not up and down like the screen fold.
Step one was
Mekrel said:
I bought this screen protector for my fold but unfortunately my experience of it was poor. Its a shame as the install went perfectly because unlike two other brands I tried, the Gobukee is actually designed specially with the Fold in mind. What I mean by that is the two halves you remove before the protector sticks to the screen (as in tab 2 and 3) run parallel to the fold crease. This means you can push the squeegee and therefore the protector into the crease.
Honestly, the install was great and I was thrilled to finally find a protector for this device that wasn't poor. Unfortunately my hype was short lived as after having the device folded for 5 minutes, the protector developed a clear band of purple and green tinting where the crease is. You'll have to excuse the poor picture quality as I only had my work iPhone 7 to hand.
Did you not experience this?
Click to expand...
Click to collapse
Wait... You did remember to remove the TOP layer after install, correct?
Mr. Orange 645 said:
Wait... You did remember to remove the TOP layer after install, correct?
Click to expand...
Click to collapse
Thanks for your detailed response and I'm glad to hear you achieved a good install, as you say, it appears that this brand has different variations. Here's the link to the one I bought - you'll see from the pictures in the listing that there's an adhesive column that sticks into and parallel to the crease.
I did indeed remove the top layer, as you say, after removing said top layer it was hard to even see there was a protector installed.
I've even looked on Amazon UK for other listings for the Gobukee protector and came across one that at first, looked similar to the listing you linked to in regards to it having images of the packing which the listing I originally bought from didn't. However, that listing then also shows the protectors that look to install the same way as the original one I bought (adhesive strip running parallel to the fold). There was also a review that said a rainbow effect appeared but clicking on that to read more of the review took me to a completely different and positive review.
I've also tried the Newzerol and Miimall protectors but these are the same protector but in different packaging. These do two halves that run perpendicular to the crease but the biggest issue I had with these was they showed lines left by the squeegee, even days after the install which is strange considering how delicate I am when applying them to such a delicate device.
Edit - okay, so I've ordered the second one I linked to because the listing seems different enough to hope I get one line yours. As you pointed out, my original one did not have a cut out for the camera and this is reflected in the two listings - one shows no cut out, the other does. Perhaps they revised the product after feedback about the fold issue and also added a cut out? I'll update the thread with how I get on.
Mekrel said:
Thanks for your detailed response and I'm glad to hear you achieved a good install, as you say, it appears that this brand has different variations. Here's the link to the one I bought - you'll see from the pictures in the listing that there's an adhesive column that sticks into and parallel to the crease.
I did indeed remove the top layer, as you say, after removing said top layer it was hard to even see there was a protector installed.
I've even looked on Amazon UK for other listings for the Gobukee protector and came across one that at first, looked similar to the listing you linked to in regards to it having images of the packing which the listing I originally bought from didn't. However, that listing then also shows the protectors that look to install the same way as the original one I bought (adhesive strip running parallel to the fold). There was also a review that said a rainbow effect appeared but clicking on that to read more of the review took me to a completely different and positive review.
I've also tried the Newzerol and Miimall protectors but these are the same protector but in different packaging. These do two halves that run perpendicular to the crease but the biggest issue I had with these was they showed lines left by the squeegee, even days after the install which is strange considering how delicate I am when applying them to such a delicate device.
Edit - okay, so I've ordered the second one I linked to because the listing seems different enough to hope I get one line yours. As you pointed out, my original one did not have a cut out for the camera and this is reflected in the two listings - one shows no cut out, the other does. Perhaps they revised the product after feedback about the fold issue and also added a cut out? I'll update the thread with how I get on.
Click to expand...
Click to collapse
Yeah, the listing for the one I bought shows the hole cut out. But when I look at the UK listing it doesn't. That's weird. Doesn't make sense to make different variants for the UK.
Now, I do have faint lines from the squeegee. But you have look at you screen at an extreme angle, and get a light to reflect right on them to see them. I don't know if I could even photograph them.
Let me. Know how the second order goes. I'm genuinely curious.
Okay so the screen protector came today and wow, I'm extremely impressed and very happy that I now have a screen protector on this device.
This Gobukee protector was very much different than the first one I bought from Amazon UK (so there's two different variations on the same Amazon UK store), in the following ways:
The protector comes with a hole punch for the camera for the inner, large display
The install method is different, essentially this display protector anchors at the top near the selfie camera
The install went really well, initially I was left with a fair few bubbles around the crease but these disappeared after 30 mins of trying to work them out with the squeegee and leaving it for an hour open.
You'll see from my pictures that you can't tell there's a protector on at all and it feels much better than the stock protector that comes in the device. Also, unlike the original Gobukee protector, no rainbow discolouration where the device folds.
I wouldn't dare not use a protector on either display on this device. Even with Gorilla glass Victus on the front and not putting this device in any pocket with items that could scratch the display, the front display has picked up some very faint hairline scratches. Not a big deal as you really need to look for them at the right lighting angle to see them but if the front display can scratch then the inside display definitely can. Plus dust and debris can easily get to the inside screen due to the large gap between the two halves near the hinge.
So Mr. Orange 465, thanks for bringing this protector to my attention and leading me to discover there were different versions doing the rounds.
Mekrel said:
Okay so the screen protector came today and wow, I'm extremely impressed and very happy that I now have a screen protector on this device.
This Gobukee protector was very much different than the first one I bought from Amazon UK (so there's two different variations on the same Amazon UK store), in the following ways:
The protector comes with a hole punch for the camera for the inner, large display
The install method is different, essentially this display protector anchors at the top near the selfie camera
The install went really well, initially I was left with a fair few bubbles around the crease but these disappeared after 30 mins of trying to work them out with the squeegee and leaving it for an hour open.
You'll see from my pictures that you can't tell there's a protector on at all and it feels much better than the stock protector that comes in the device. Also, unlike the original Gobukee protector, no rainbow discolouration where the device folds.
I wouldn't dare not use a protector on either display on this device. Even with Gorilla glass Victus on the front and not putting this device in any pocket with items that could scratch the display, the front display has picked up some very faint hairline scratches. Not a big deal as you really need to look for them at the right lighting angle to see them but if the front display can scratch then the inside display definitely can. Plus dust and debris can easily get to the inside screen due to the large gap between the two halves near the hinge.
So Mr. Orange 465, thanks for bringing this protector to my attention and leading me to discover there were different versions doing the rounds.
Click to expand...
Click to collapse
Awesome!! I'm glad you found one that works!!
I just installed the Ozero about five days ago. I noticed yesterday that it was starting to peel up on the edges right at the crease. Planned to change it out this weekend. Then today I opened the phone and the Orzero completely let go at the crease. From top to bottom it came loose from the screen. I'll try to post a pic tonight of it when I'm home and have access to my other phone.
I'll try the other Ozero screen protector I have and hope this was a fluke, since I love how smooth these feel, but if the next one lets go like this one, I'll go back to Gobukee. I never had an issue with them.
Got so tired of the crappy internal screen protector and finally (hesitantly) removed it and replaced it with the healing shield matte screen protector from Amazon. The install went flawlessly outside of a few bubbles on the edges which hopefully go away in the next couple days. It's such a night and day difference. Before I avoided using the large screen cause I hated the feeling of it and OH MAN all those fingerprints.....now, although the screen isn't as sharp, it still looks great to me and is silky smooth AND no fingerprints anywhere. I know there have been a lot of complaints about it lifting after a couple days or weeks so I'll be cautious, but for now I love it.
Hi, any updates on this screen protector? Any bubbles appeared along the crease or corners etc? Thanks...
I just tried put this screen protector. It does bubble slightly from the top of the crease when open.....sometimes. sometimes I'll open it and it's fine. However this is much better than many of the other clear protectors I've tried. Seems slicker and more scratch resistant than the others as well to me. I'm actually going protector free for a little while and see how I like it. I think I've tried 8 or 9 screen protectors now. I'm more partial to the matte ones for fingerprint reasons.
jmpcrx said:
Hi, any updates on this screen protector? Any bubbles appeared along the crease or corners etc? Thanks...
Click to expand...
Click to collapse
No bubbles or peeling at all. I actually removed it to try the Ozero brand screen protector, but that one actually would shrink on really cold days, and would come completely loose at the fold when opening.
So I switched back to Gobukee and haven't had any issues at all. Best screen protector out there, in my opinion.
Mr. Orange 645 said:
No bubbles or peeling at all. I actually removed it to try the Ozero brand screen protector, but that one actually would shrink on really cold days, and would come completely loose at the fold when opening.
So I switched back to Gobukee and haven't had any issues at all. Best screen protector out there, in my opinion.
Click to expand...
Click to collapse
Thanks for the reply... I'm guessing the rear screen protector, if it has one, doesn't actually fit the whole of the rear? Thanks .. trying to find k e that covers all the rear of the phone (other than the camera)..
Can anyone provide some new links for the screen protectors, this ones are not available. I need to replace my interior screen but the ones i see are not so good
Yeah can anyone prov
Mekrel said:
Okay so the screen protector came today and wow, I'm extremely impressed and very happy that I now have a screen protector on this device.
This Gobukee protector was very much different than the first one I bought from Amazon UK (so there's two different variations on the same Amazon UK store), in the following ways:
The protector comes with a hole punch for the camera for the inner, large display
The install method is different, essentially this display protector anchors at the top near the selfie camera
The install went really well, initially I was left with a fair few bubbles around the crease but these disappeared after 30 mins of trying to work them out with the squeegee and leaving it for an hour open.
You'll see from my pictures that you can't tell there's a protector on at all and it feels much better than the stock protector that comes in the device. Also, unlike the original Gobukee protector, no rainbow discolouration where the device folds.
I wouldn't dare not use a protector on either display on this device. Even with Gorilla glass Victus on the front and not putting this device in any pocket with items that could scratch the display, the front display has picked up some very faint hairline scratches. Not a big deal as you really need to look for them at the right lighting angle to see them but if the front display can scratch then the inside display definitely can. Plus dust and debris can easily get to the inside screen due to the large gap between the two halves near the hinge.
So Mr. Orange 465, thanks for bringing this protector to my attention and leading me to discover there were different versions doing the rounds.
Click to expand...
Click to collapse
Hi, please could you provide a link to the version that works for you in the UK.
I'm looking to add a screen protector to the inside screen and haven't found a decent one yet