Develop Bugs

Review: Martin Field's Overlay Screen Protector

I purchased this based on some feedback I had read one some other forums. I have tried nearly every major screen protector out there (Spigen, RearthUSA, Incipio, Switcheasy, BodyGuardz, XO Skins, Best Skins Ever, a ton of cheap ones off Amazon, Zagg, etc.). Up until this point, I had always found the Ultra Crystal from Spigen to be the best overall. Not anymore.
Before I get started I want to mention that the Martin Fields Screen protectors are not cheap. One screen protector for the Galaxy Nexus is $16.99 ($34.99 for one iPad protector and $29.99 for one Nexus 7 protector)and it only comes with one screen protector and a set of instructions. That's it.
One issue I've always found to be a huge problem with these dry, crystal clear screen protectors (Again, think Spigen Ultra Crystal) is that they show fingerprints so easily that it really can become a huge nuisance and to my surprise this one doesn't show much at all. I would say it's nearly as good at resisting fingerprints as a matte finish screen protector.
A very innovative feature this screen protector offers is that it is completely removable. They include a Mylar sheet that you can stick it to if you need to take it off. Just apply a small piece of scotch tape at the bottom corner and slowly pull to remove it. This does bring up the biggest problem that I have with this protector though. It is somewhat brittle. It will crease if you aren't careful with it. In fact, if you look in the pictures I have posted, you'll notice a slight crease in the bottom right corner. I've emailed the seller that I purchased it from on Amazon to see if they'll replace it. Not sure if that'll happen and it isn't all that distracting.
Quick Summary:
PROS:
As clear as any I've ever used
Does not pick up oils like most clear, dry application screen protectors generally do
Feels as close to glass as anything I've ever used
Reusable
Covers entire screen
Comes with a Camera Lens cover as well
CONS:
Not cheap. If you purchase directly from MartinFields.com it is $16.99 + $4.99 shipping. Be aware of fakes on Amazon.
Doesn't come with much. Just a simple paper package, a screen protector and a Mylar sheet to apply it to if you decide to take it off and use it later.
Fragile, it will crease if you aren't careful
Almost too big. If you don't line it up absolutely perfect it will not adhere on the sides, bottom. It's almost cut too perfect to a fault.
Anyway, here are some pictures. I had just ran my palm down the screen to show you just how well this does on hand oils.
Martin Field's Link

Well I take it no one found this helpful?

Breezer23 said:
Well I take it no one found this helpful?
Click to expand...
Click to collapse
I already have one but I will concur with everything you said
Mine creased before I put it on but I was able to bend it back and can't tell you where the crease ever was at this point. Mine is scratched up pretty good at this point but I'm hard on phones so it's not surprising. I've yet to find a screen protector that holds up to my use.

Mind had a crease initially. I contacted their support line in Hong Kong and they had one sent out to me the next day. I ended up buying one for my Nexus 7 and my iPad 3.
It's weird, the Ultra Crystal's and many other dry application protectors leave blue smears when you try to wipe away fingerprints. These don't. They are there but they don't leave that annoying blue greasy smudge.

Screen Protector Discussion Thread

Hi everyone. I searched the forums for screen protectors, and what I found was a whole lot of threads on various screen protectors out there, but nothing centralizing these discussions. So I thought I'd create this thread.
1. What type of screen protector do you use?
2. How has it held up?
3. Have you gone without a screen protector?
4. If so, do you have any scratches?
5. What's the most you have paid for one?
6. What's the cheapest you have paid for one?
7. Any Rants? Any Raves?
8. Any you would recommend?
9. Any you would want to try?
10. Any tips to putting certain ones on?
Let's help each other out by sharing our knowledge on screen protectors for the HTC One.

Top screen protectors according to you guys.
1. Mime Feather Glass Screen Protector - $27.95 http://mimeusa.com/product/htc-one-feather-glass-tempered-glass-screen-protector/
2. Zagg Clear HD Screen - $19.99 http://www.zagg.com/invisibleshield/htc-one-cases-screen-protectors-covers-skins-shields
3. Verizon 3 Pack Anti-scratch Protectors - $12.99 http://www.verizonwireless.com/acce...-protectors-3-pack-w-screen-wipe-for-htc-one/
Installation videos
1. Android Authority demonstrating how to install wet and dry screen protectors such as the Zagg and ScreenWear http://youtu.be/sf0a-c7WH8U
2. Danny Winget demonstrating how to install a glass screen protector such as the Spigen Glass http://youtu.be/F4_wtcmWVv4
Reviews via Amazon
1. Zagg HD http://www.amazon.com/ZAGG-HDHTCM7S...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
2. Zagg Original http://www.amazon.com/ZAGG-HTCM7S-i...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
3. Mime Ghost Glass http://www.amazon.com/MIME-Tempered...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
4. AmFilm http://www.amazon.com/Protector-Inv...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
5. Tech Armor http://www.amazon.com/Tech-Armor-De...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
6. Skinomi http://www.amazon.com/Skinomi-TechS...dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1
Drop Test
1. Zagg Shield drop test http://youtu.be/NxcUMZ4bTCM
2. Tempered Glass drop test http://youtu.be/33T1Qun7jsQ

Zagg HTC One High Def Screen Protector - Amazon
I think Zagg makes the best screen protectors, I have used them on both the HTC Droid Incredible and the HTC One. The Zagg screen protectors are not the cheapest option for screen protectors especially if you go for the ultra clear model but I think the cost is worth it, especially since zagg offers warranty replacements, you only pay for shipping. With the warranty replacements, registering your product on the Zagg website is quick and easy, there are no serial numbers you need to have or anything, you only need to tell them what device you got it for and which model screen protector you got.
Another benefit of the zagg shields is the lifetime of the screen protector, in my experience the screen protectors lasted almost 2 years for my Droid Incredible before I replaced it, the screen protector started to come off around the edges of my phone. While the screen protectors do age, I would much prefer the aged screen protector opposed to any damage to my screen. In my entire life of my Droid Incredible, bought in April 2010 and still used as an e-reader by my girlfriend today, there is not one scratch on the screen thanks to the Zagg shield.
While I have not personally tried the Verizon 3 pack of screen protectors, I have had friends use them and they were disappointed with the quality of them, the biggest issue was having the screen protector stay on.
Zagg screen protectors have done such a great job in my opinion I have not wanted or even thought of trying another brand.
As for tips to putting the Zagg brand on, make sure you wash your hands before you do anything, clean the screen so their is no oil, fingerprints, dust or anything else on the phone, make sure the spray gets on both the screen protector and the screen but do not soak either, just enough spray to cover the phone and protector. I found it best when applying the screen protector to start at the top of the screen in one of the corners and work your way to the opposite top corner then work your way down, make sure to use the applying tool they put in the packaging, be sure to use a good amount of force when use the tool but be careful not to apply too much pressure and crack the screen.
If you do not want to try putting the screen protector on yourself, you can go to the Cell Phone employees at Best Buy and have them put the screen protector on. You do not need to purchase the protector from Best Buy, but they charge you a fee to do it. The major benefit of this is that if they screw up and ruin your protector they will replace it.

I tried the Verizon 3-pack when initially purchasing the one. While they are decent, I knew I wanted something a little more rugged.
I did some research and ended up settling on the Mime USA Feather lite tempered glass screen protector. It's super thin and flexes nicely when unboxed, so it's highly unlikely to actually shatter like other tempered glass protectors. It's extremely scratch resistent. I tested car keys, nails, and knives on the screen protector after applying it to the phone and absolutely no marks showed up. It fits perfectly to the parameters of the screen and is hardly noticable after application. I would highly recommend this product. I ordered it from the Mime USA website for about $28, they even threw in a code for free shipping!
Sent from my HTC6500LVW using xda app-developers app

I usually don't use screen protectors and whenever I put on a case, I take it off an hour later. I've had the phone for like 9 months now and the screen is fine. There are tiny little scratches but you can't notice them unless you try really hard to, they don't affect the clarity of the screen in any way. I just don't like using screen protectors because they attract finger prints and smudges so easily even when I try a more expensinve screen protector. Honestly the screen will be fine for a long time. Yes there will be extremely tiny scratches but you won't care because they're almost non-existant. But one thing to keep in mind though, is that sand is crazy harsh on the screens, so I'm extra careful when I go to the beach with my phone. That's when I suggest putting on a case and a screen protector. Because even if a tiny bit of sand getes in your pocket, it might cause a little damage. Right now my phone is brand new since I got it replaced because of a camera issue, and I just can't get myself to stick with putting on a case or screen protector, I had a screen protector on it but I took it off 2 weeks later because I miss the naked screen.

Spitfire91726 said:
I did some research and ended up settling on the Mime USA Feather lite tempered glass screen protector. It's super thin and flexes nicely when unboxed, so it's highly unlikely to actually shatter like other tempered glass protectors. It's extremely scratch resistent.
Click to expand...
Click to collapse
Reviews go with what you said. I think when I buy my next screen protector when my zagg wears down, I'm going to try one of these.

i'm using an invisible shield screen protector. Went on pretty easy, there were no bubbles, and it's pretty thick. I've only had it on for a week, so I can't say much about durability, but it's pretty good as far as a screen protector goes. I'm still very partial to those matte finish screen protectors, so i'll probably be picking up one of those in the future.

BygSii said:
Reviews go with what you said. I think when I buy my next screen protector when my zagg wears down, I'm going to try one of these.
Click to expand...
Click to collapse
Got a MIME Feather myself about a month ago or so now, and I must say that it's the best choice I've ever made as far as screen protection. I'd had a Spigen and some other tempered glass brand, but they were both just too thick and noticeable on the screen. The Feather is perfect because it's hard to even tell it's on there, plus it has the Oleophobic coating to prevent smudges and fingerprints. Seriously, don't even waste your money on another screen protector. You can't beat the MIME Feather.

tyler.durden said:
Got a MIME Feather myself about a month ago or so now, and I must say that it's the best choice I've ever made as far as screen protection. I'd had a Spigen and some other tempered glass brand, but they were both just too thick and noticeable on the screen. The Feather is perfect because it's hard to even tell it's on there, plus it has the Oleophobic coating to prevent smudges and fingerprints. Seriously, don't even waste your money on another screen protector. You can't beat the MIME Feather.
Click to expand...
Click to collapse
+1 what he said, minus the experience with Spigen. The MIME Feather is the first glass screen protector I've tried, and I don't think I'll ever use anything else. It's superb and well worth the premium price. With that on the screen and a Ballistic Shell Gel case on the rest of the phone, I don't worry about it too much.

I got a EBay $6.99, Chinese made, 0.4mm thick tempered glass screen protector a few weeks ago.
Went on really well, no bubbles and sticking down along all edges and corners. Has the beveled edges on the glass so no sharp edges.
Far better than ANY plastic one i have used on any phone. Touchscreen works well with it on.
Actually hard to notice now its on unless you run your finger from the speaker onto the screen , so the REALLY thin ones must be pretty close to invisible.
I polish up the screen every 2-3 days. Does get prints on it, so maybe the expensive ones have a better oleophobic coating??
For the price, most excellent.

astmacca said:
I got a EBay $6.99, Chinese made, 0.4mm thick tempered glass screen protector a few weeks ago.
Went on really well, no bubbles and sticking down along all edges and corners. Has the beveled edges on the glass so no sharp edges.
Far better than ANY plastic one i have used on any phone. Touchscreen works well with it on.
Actually hard to notice now its on unless you run your finger from the speaker onto the screen , so the REALLY thin ones must be pretty close to invisible.
I polish up the screen every 2-3 days. Does get prints on it, so maybe the expensive ones have a better oleophobic coating??
For the price, most excellent.
Click to expand...
Click to collapse
so it's basically putting another layer of glass on top of your screen? Like putting a slide cover on a microscope slide? I wonder if that'll make screen touching a little imprecise (or any more than having a screen protector.

xzyragon said:
so it's basically putting another layer of glass on top of your screen? Like putting a slide cover on a microscope slide? I wonder if that'll make screen touching a little imprecise (or any more than having a screen protector.
Click to expand...
Click to collapse
Its definitely putting another layer of glass on the screen. You have to be careful and get it in the right position 1st time as they dont move around once stuck down. Removing them without breaking is, i suspect, very difficult. The "tape hinge" method of application works pretty well.
I have found the touch sensitivity on mine to be great. Certainly there is no difference to the "usability" of the phone, and the smoothness an feel is as good as the original screen.
I did read one review where the buttons on screen wouldn't work with a glass screen protector, but that has certainly NOT been my experience. From what i have read the thickness of these has come down from around 0.6mm in early incarnations to something like 0.15mm and being flexible in some brands.
I got a 0.4mm one. No scratches as yet. Its supposed to be very hard (9H??). I had no issues with fitting my case on after installing the screen protector.. Its a cheap silicone and hardback model that provides good corner protection. Hopefully the screen protector will help if it falls on its face sometime.

What about Just Like Glass?
Has anyone tried it?

Didnt know protectors like the Mime feather existed. Will have to try it out.

Xeternall said:
Didnt know protectors like the Mime feather existed. Will have to try it out.
Click to expand...
Click to collapse
Just bought my first one a month ago (MIME Ghost), best screen protector I have ever used. It's definitely scratch resistant and feels like the original screen. Not sure how it will hold up to drops, but that's not something I am willing to test.

Had a friend buy some Write Guard screen protectors for his HTC One. I installed one on his HTC One. Screen protector was all ready getting all kinds of scratches in it. No Bueno.

I used the XtremeGuard screen protector for a very long time on my HTC One, but recently I decided I wanted a matte finish screen protector, so I switched to Tech Armor Anti-Glare. Feels much nicer to me and gets a lot less fingerprints and smudges.

I was using the protector that came with the UG case. After reading this thread, I picked up a MIME. Very impressed. It goes on dry, was easy to remove and reposition and left absolutly no bubles (these drive me CRAZY). It has somewhat finger print resistant and I did not heave to deal with wetting the protector, then waiting 24 hours to see if all the bubles went away. Best screen protector I have purchased and believe me, I have tried at least 20 different types over the years.
I have had no issues with the touch sensitivity. You can't even notice it's on unless you look really closely at the top edge.

Using the screen protector that came with my otterbox comuter and it is quite terrible.
The screen protector has been on since April and it is already deteriorating. The spots where I'd swype, type show heavy signs of use. With a faint finger swipe over the screen you can actually feel the difference.
Other than that, the actual performance isn't the worst. Glare and all in the sun is bad, indoors though I don't have any issues.
Will look into MIME.
Cheers,

Tempered Glass screen protectors; Recommended ones?

So I've been looking for a tempered glass screen protector for my Moto X, and I'm not sure which to get, the MIME or i-Blason. So I figured that I would ask the community what they recommend.

nachtdraegan said:
So I've been looking for a tempered glass screen protector for my Moto X, and I'm not sure which to get, the MIME or i-Blason. So I figured that I would ask the community what they recommend.
Click to expand...
Click to collapse
Between the two, i-Blason. It fits much better than the mime

I have the MIME, can't say as I'm super impressed with it. I'm considering switching to the iBlason just because it's thinner. I feel like the MIME is interfering with the touch sensitivity and causing me to have to press harder than I should. Plus it's just ever so slightly too low and the curved edge interferes with the front facing camera causing a slight distortion at the top of the image. I could move it, but that's where it sits centered.

I had MIME, dropped my MotoX couple of times, MIME did it's job and protected the screen. Unfortunately it chipped and then it started to break really quickly. Don't get me wrong I don't complain about this, it's glass it breaks when dropped on concrete, but it's $25 (+ shipping, I live outside US), and spending this kind of money every month is something I would like to avoid, so I bought some cheep Chinese one on eBay for less than $10. And besides that MIME has nice curved edges, I really don't see the difference...

I had the MIME on my X and while I liked it the sensitivity in the Nav bar area wasn't always good if the phone was say laying on a desk. That being said the MIME on my wifes X is perfect. I just removed my MIME and installed the Mocolo glass screen protector, install was as simple as the MIME and I even had to realign it slightly so peeling it off and putting it back on wasn't a problem. I now have No issues at the Nav bar area so I'm very happy with the Mocolo. http://glass4m.com/products/mocolo-premium-tempered-glass-screen-protector-for-moto-x-g
Just to add, the order to shipped to my door process was 6 days from China to NJ, very impressed.

I-Blason is the best fit out of all the available tempered glass screen protectors.

I-BLASON is the best fit size for moto x. But the glass cover Distance Sensor also.
Maybe have below problem:
Take a call, phone will auto screen off and can not make it on until end of this call.
Power key also can not use while calling.
Any one who have Iblason to check it have this problem or not?

FSRBIKER said:
I had the MIME on my X and while I liked it the sensitivity in the Nav bar area wasn't always good if the phone was say laying on a desk. That being said the MIME on my wifes X is perfect. I just removed my MIME and installed the Mocolo glass screen protector, install was as simple as the MIME and I even had to realign it slightly so peeling it off and putting it back on wasn't a problem. I now have No issues at the Nav bar area so I'm very happy with the Mocolo. http://glass4m.com/products/mocolo-premium-tempered-glass-screen-protector-for-moto-x-g
Just to add, the order to shipped to my door process was 6 days from China to NJ, very impressed.
Click to expand...
Click to collapse
I'm curious what (if any) case you are using.
I'm considering getting one of these, but I'm concerned about the fit inside a hard case. The hard cases are already a VERY tight fit, and I'm wondering if it can even be snapped on with the extra 0.33mm that the Mocolo adds to the thickness.
Can anyone advise?

samwathegreat said:
I'm curious what (if any) case you are using.
I'm considering getting one of these, but I'm concerned about the fit inside a hard case. The hard cases are already a VERY tight fit, and I'm wondering if it can even be snapped on with the extra 0.33mm that the Mocolo adds to the thickness.
Can anyone advise?
Click to expand...
Click to collapse
I have a seidio surface case and an i-blason glass screen protector (ordered from amazon). Long story short the case does not overlap with the tempered glass protector that I got. Although mounting the tempered glass protector is best done with the case already on the device.Top to bottom the case and screen protector is a VERY tight fit (but it does barely fit)!
What confuses me though is people above are saying the i-blason protector covers the proximity sensor, mine doesn't, so I am a bit puzzled...

muiriddin said:
I have a seidio surface case and an i-blason glass screen protector (ordered from amazon). Long story short the case does not overlap with the tempered glass protector that I got. Although mounting the tempered glass protector is best done with the case already on the device.Top to bottom the case and screen protector is a VERY tight fit (but it does barely fit)!
What confuses me though is people above are saying the i-blason protector covers the proximity sensor, mine doesn't, so I am a bit puzzled...
Click to expand...
Click to collapse
From what I understand, it used to, but they fixed it a long time ago.
I have the i-blason, was very careful with installation, used the "hinge" method, went on fine, been over a month with no issues, I use a minimal case, so no issue with it. I still "baby" it, the protector is more so that in case, I'll say "lucky I had a protector on it"

muiriddin said:
What confuses me though is people above are saying the i-blason protector covers the proximity sensor, mine doesn't, so I am a bit puzzled...
Click to expand...
Click to collapse
The difference between version 1 and 2.

I have the mime, and coming from the Zagg glass on my Galaxy S5 which was absolutely amazing, it is just as good. The fit is extremely tight though, you need to be spot on for installation. I have only given it a day though so I'll see if it stands the test of time.

speciala106 said:
I have the mime, and coming from the Zagg glass on my Galaxy S5 which was absolutely amazing, it is just as good. The fit is extremely tight though, you need to be spot on for installation. I have only given it a day though so I'll see if it stands the test of time.
Click to expand...
Click to collapse
Ok so the Ghost Glass only lasted about 2 weeks before it started to chip in the sides from just daily use. Then it shattered when I went to remove it. Customer service responded in less than an hour with a free replacement coupon. So A+ for customer service but the product kindof sucked. Using it was great but as soon as there is one fault the whole thing is junk, something that my Zagg Glass didnt have an issue with. The Zagg cracked but still went on without an issue for 2 months, and even upon removal it stayed in one solid piece.
I will try the replacement for a while and then go to iBlason if there is any issues.

I have the motocolo. The touch screen is good, but the sensivity not realy realy.

Love my iblason, it started getting spiderweb cracks after several months of use, but I was able to transfer the cracked one to my replacement moto x while I work on getting a replacement iblason. No luck emailing them, I have to fill out the warranty form on the site now

Iblason have 2 version? I see many problems with proximity sensor?
Thanks

So any updates on the glass protectors you guys are using?
I've had my MIME for over a year and it's starting to chip and crack after dropping it. I'm not sure if I want to get another one cause I had a lot of difficulty putting it on precisely so as to not have bubble edges.

I have the Mocolo Glass Screen Protector. This Glass fits very nice on the Moto X.

rupro327 said:
I have the Mocolo Glass Screen Protector. This Glass fits very nice on the Moto X.
Click to expand...
Click to collapse
I had motocola but I find the sensitivity of the touch worse so I gave classic screen protector.

I haven't tried all the glass screen protectors, but I bought the monoy and I love it. The best part about it is the edges are curved so your finger just flows over the sides and it feels great.

Tempered glass protector for the back glass?

When I first got my S8+, I was worried the back glass would scratch easy (turns out I was right ), so I wanted to protect it, even though I knew I would have a case on it. I've seen dirt get between phones and cases before and cause horrible scratches.
I first tried a clear wet application skin from BSE, but I could never make it look right. The midnight black shoes every imperfection and bubble, whereas my wife's Orchid Grey looks perfect with the skin on. You can't tell it's there, even on the sides.
So I began thinking it would be nice if someone made a tempered glass protector for the back. The sides are curved, but so is the screen, and there's plenty of TGSPs on the market. But I couldn't find any.
Then last week I saw one on Amazon. It comes with a full screen TGSP, a TGP for the back, and a TGP for the camera. Link is below.
It appears the back protector is like other TGSPs. It has no glue on the middle, just along the edges. That's not a big deal, as I would apply it like I did my TGSP. I would remove the adhesive strip on the edge and use LOCA to adhere it fully to the phone. Most camera lens TGPs get horrible reviews on Amazon, so it would likely go in the trash.
I'm trying to decide what to do. Here are my pros and cons, but I wanted everyone else's opinion, and also want to know if anyone else has any experience with this set. Again, I'm currently using a TGSP for the screen, so this is a question about the TGP for the BACK.
Pros:
*Protection for the back cover as well as the front.
*Protects from scratches and adds some drop protection
*Protectors are both glass, so it would still feel like a naked device.
*Back protector is Crystal clear, and with LOCA, would show off the beautiful black back glass without any bubbles, glare, etc.
*Glass doesn't get marks and dents like wet application protectors.
Cons:
*It would (probably) be too thick to use a case, so increased chance of damage if dropped.
*These TGSPs typically use cheap oleophobic coatings, so it would still be a fingerprint magnet on the back.
*This would leave a ridge around the screen and the back protector, so it MAY make it uncomfortable to hold.
*No protection for the side frame
*It will scratch (but can always be replaced)
*I wish the cutouts were more precise. I'd like three separate cutouts for camera and sensors, not one big one. Would make it more seemless.
Again, looking for other thoughts and opinions and any experience.
No offense, but if all you have to say is that you go naked and have no scratches, or that you don't like screen protectors, then please don't reply. I'm not interested in a screen protector debate. I'm only interested in your opinions about this particular set and using a protector on the back. Also, I know about the liquid nano stuff and have no interest in it. I've seen all the reviews.
Thanks!
JimBird Tempered Glass Screen Protector Front + Back + Camera Lens Protector For Galaxy S8 Plus S8+ 9H Anti-Scratch Anti-Fingerprint https://www.amazon.com/dp/B073S4YZW1/ref=cm_sw_r_cp_apa_MohHzbHWHA99A

Question Which front glass screen Which front glass screen protector

From experience of using front screen glass protectors for the fold 3, which would you recommend for the fold 4?

Yes won't purchase from whitestone due to bad support they gave when trying to get support on screen protector and how rude they were. Even though I used to recommend them a lot before. But when needed. They failed. But that was my experience. Should be decent but haven't used them for more than a year since it happened. With the note 20 ultra release.
Spigen looks decent but haven't used their screen protectors as used AMfilm. But they don't seem to have for the fold. So still seeing on what to use. As well.
But seeing both would be about same warranty just depends on who handles it better.
The Spigen comes with guide to install it but whitestone comes with 2 at a cheaper price.
The good thing of these is not as the note series that they are $30 to $45 per pack.

The Spigen is so easy to install, plus I don't see the point of installing or replace the inner screen protector. We can get Samsung to do it for free? or cheaply after a year.

I went with the non liquid adhesive whitestone simply because i have it on my fold 3 and it works well. Plus the kit came with a film hinge protector as well.

this one. it involve soap water while applying. i dont know if we can apply the inside protector over and bove the stock one on inside screen
https://www.amazon.in/gp/product/B0B9YQF2LF/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

Installed the Whitestone last night with no issues. This one is not as easy as the Spigen since there is no lineup template but I like that I received 2 front screen protectors, a camera protector and an edge guard.

can we apply screen procetor above the factory one inside? last year the inside screen protector oleophobic coating got weared off and it was so hard to scroll. this time thinking of applying another one, so that i can change it every 5months or so

I applied the Spigen EZFit on my Fold4 today, came out perfect. They make a great product, been buying their stuff for years.

Recieved my fold 4 today
Immediately i put on spigen glass Tr
The front tempered glass is good
And doesn’t interfere with the case lips
But the hinge protector is not working as advertised.
The hinge protector from spigen is very thin already but after installing it, everytime i open or close the screen it will get caught up and peeled off on edges
Maybe the gap between the hinge and the screen is slimmer this time
So I don’t think we can put any protector on the hinge without interfering with the mechanism.
On my old flip 1 it was ok

I tried the Whitestone and it is smaller than the front screen?!?!?!? I should send it back!

Flame Red said:
I tried the Whitestone and it is smaller than the front screen?!?!?!? I should send it back!
Click to expand...
Click to collapse
You kinda want a smaller screen protector because the case will take up the rest of the screen

Flame Red said:
I tried the Whitestone and it is smaller than the front screen?!?!?!? I should send it back!
Click to expand...
Click to collapse
Yeah they all are, so cases don't lift it. I've put a Samsung one on now, not glass one.

10-Dee-Q said:
Recieved my fold 4 today
Immediately i put on spigen glass Tr
The front tempered glass is good
And doesn’t interfere with the case lips
But the hinge protector is not working as advertised.
The hinge protector from spigen is very thin already but after installing it, everytime i open or close the screen it will get caught up and peeled off on edges
Maybe the gap between the hinge and the screen is slimmer this time
So I don’t think we can put any protector on the hinge without interfering with the mechanism.
On my old flip 1 it was ok
Click to expand...
Click to collapse
Yeah had the exact same thing, took it off, ordered full body skin instead

I also got the whitestone. I must say it perfectly covers the actual LCD part with about 2mm extra glass borders. The camera lense cutout is quite perfect as well, with the face unlock light ring lining up perfectly. I would certainly have preferred the glass to be taller and wider, but that's to prevent case interference as we know. Sometimes later in the cycle certain companies release their "edge to edge" screen protects, would want to see if any of them come up.
The included camera cover also fits quite perfectly, no have issues with the official Samsung case cutout.
The included hinge protector film I didn't try, not sure if it would mess with the mechanism to keep dust/grime out.
Overall for the price, I think it's pretty good.

Waiting for my Whitestone EZ glass screen protector to arrive. In the meantime, I already have a fairly deep scratch in the front glass. Ive babied this phone and have zero clue where it came from.