System installed "Themes" is not working properly. - Honor 7 Themes and Apps

I bought Honor 7 last year in November and then I got an update too (675B170), my device is working perfectly fine.
I recommended honor 7 to my friend, he bought last week and to my surprise, his phone wasn't getting update.
It was stuck on 675B160. One more issue is that his phone's system installed "Themes" app is showing only stock installed themes and not showing options to install/download more themes.
Later, I found local update method on internet to update phone to 675B170, I followed the steps carefully and update was successful, but "Themes" system app remains same as before.
Themes app in my phone is giving 4 options, Featured, Top, Category, Mine and customize.
In my friend's phone, its shows Themes and customize.
Can anyone of you suggest solution for this ?
PS: I am a noob and newbie here. Please forgive mistakes If I have made some.

I had the same problem, after i've upgraded it to the latest version the app asked to read the phone's IMEI. After i allowed this permission the theme store started to work fine. My firmware upgrading route: B121>B140>B170>B180, all updates which i forced by manual method as the phone didn't find any update available here in UK. My phone is a PLK-L01, hope this can help

Related

[Q]Web-based Android Market issue

(There are other posts around the forum about this, but none apparently directly related to Desire)
I'm using Oxygen 2.0 RC7 ROM with recommended radio, Oxygen HBOOT & S-OFF.
I've tried using the Online Market today, but not having much luck.
The apps I have purchased / installed show up in the market, but I am unable to install any new apps from here with the site claiming: "There are no android phones associated with this account. Please sign in with a different account."
If I check the settings under "My Marketplace Account" no device is detected. The help only has 2 options;
1) Check your account login (done, correct)
2) open the market on the device (done & downloaded an app to be sure) - Still no dice!
Is anyone else having this issue with:
a) the same ROM / setup
b) a different ROM / Setup
Has anyone discovered a workaround?
Has anyone had the same issue with a similar setup but been able to correct it?
Has anyone had NO issues with the same/similar setup?
So many questions...
Appreciate any and all advice
No problems with oxygen, but since it only just launched give it some time. Probably just a bit busy because everybody is trying it out.
Sent from my HTC Desire using XDA App
I have the same problem, but I'm using Leedroid 2.3d. In "My Account" it only shows paid apps and some free apps, which I have deleted a couple of month ago.
I haven't found a solution anywhere. But it seems others have got this problem too. And it doesn't seem to be related to the Desire or any specific rom.
Yeah, looking at the official blog post announcing the release, it appears this porblem is affecting stock ROMs also.
Waiting game!
similar issue here: LeeDroid 2.3d
I can see apps I installed before I rooted the phone, but no apps after that.
In the settings page I can see my phone and the "Last used" time stamp is today but for all the apps the latest time stamp is on the day I rooted the phone (the 3rd of January).
I opened a ticket with Google.
In the same boat - no devices found
jeffois said:
(There are other posts around the forum about this, but none apparently directly related to Desire)
I'm using Oxygen 2.0 RC7 ROM with recommended radio, Oxygen HBOOT & S-OFF.
I've tried using the market dot android.com Online Market today, but not having much luck.
The apps I have purchased / installed show up in the market, but I am unable to install any new apps from here with the site claiming: "There are no android phones associated with this account. Please sign in with a different account."
If I check the settings under "My Marketplace Account" no device is detected. The help only has 2 options;
1) Check your account login (done, correct)
2) open the market on the device (done & downloaded an app to be sure) - Still no dice!
Is anyone else having this issue with:
a) the same ROM / setup
b) a different ROM / Setup
Has anyone discovered a workaround?
Has anyone had the same issue with a similar setup but been able to correct it?
Has anyone had NO issues with the same/similar setup?
So many questions...
Appreciate any and all advice
Click to expand...
Click to collapse
I have exactly the same set up (but I'm with Telstra not Vodaphone).
From device - market access fine - and can even see my purchase history in my gmail account dashboard - www dot google.com/dashboard/
But no matter what I do, no device found on website.
Tried reinstalling oxygen (as I had installed the latest marketplace which isn't part of the standard RC7 release), but no help...
Would love to hear how to fix this!
Well, I don't quite know what to say... but mine...just....started working!
Maybe the roll-out has had some bugs or other issues? I dunno. Just checked back and it saw my device. Tried installing an app and it started pushing to my device immediately.
I guess you'll just need to hold on and be patient?
Cheers, Jeff

[Q] Need help with Play Store

Hello guys, I bought this phone and I am happy with it. But my question is that, when I get any app update in play store it download the whole app instead of the update size. Because I have a spice mi 1010 tablet(Jellybean) too and when I update same app in that tablet it just update small amount of data and when I update same app in Android One it download whole app.
Is that normal in kitkat that download whole app again when update came?
Also I got Google play v5 material design update in my tablet but there is no update of google play in my Andorid one.
Please help someone.
Application attached .
Space Cow said:
Hello guys, I bought this phone and I am happy with it. But my question is that, when I get any app update in play store it download the whole app instead of the update size. Because I have a spice mi 1010 tablet(Jellybean) too and when I update same app in that tablet it just update small amount of data and when I update same app in Android One it download whole app.
Is that normal in kitkat that download whole app again when update came?
Also I got Google play v5 material design update in my tablet but there is no update of google play in my Andorid one.
Please help someone.
Click to expand...
Click to collapse
http://www.apkmirror.com/apk/google-inc/google-play-store/google-play-store-5-0-37-apk/
DOWNLOAD http://www.apkmirror.com/apk/google-inc/google-play-store/google-play-store-5-0-37-apk/
yes new material design is not yet updated but you can update it directly using the app which is attached , download it and then install it .
Thank me if i helped u .
Like my fb page www.facebook.com/kustomhackers
Donate us www.learnhacking.net/about-us
Share my website www.learnhacking.net
Need help, developers please look into this matter.
I am having same issue. Can someone please help? The issue is that whenever updating any app via playstore itself, the full app gets downloaded instead of the incremental update. The camera app is over 35mb, many other apps are about the same size. Downloading such big updates every other day is not practical. I have used an HTC device with ICS earlier.. It downloaded incremental updates... Like maybe 100kb to 3mb for apps more than 40mb themselves. I can understand that sometimes the updates can be huge but I have seen this issue every time.
BTW, just FYI, I think something has broke this feature. The day I got my phone, I updated some app and it did not download entire thing, just a part. Now where has that feature gone? Someone please try factory reset and confirm this.
even i have this play store prob.. right from day 1 . haven't found a soln.
Sent from my Micromax AQ4501
To update the Google Play Store on your Android without an APK.
Follow the steps:
1. Open the Google Play Store app
2. Open the side slide-out menu
3. Select "Settings"
4. Scroll down until you see "Build version"
5. Click on "Build version"
If a new build of the Play Store is available, you will be prompted to download and install it. If it’s already the latest, you will get a message that reads, “Google Play Store is up to date,” as you can see in the photo above.
Does your device have this problem? And does the method suggested by you work for even yourself??
I have a strong feeling that this has something to do with cache. Something like the device is unable to understand what the earlier version is while downloading!! Or maybe our ROM lacks the permission to write over the memory where the installed apps are!! And so it downloads entire app and installs it as fresh install because it is unable to patch the update over already installed app... I am just wondering, I don't know much about the android software and this new dalvik v/s ART. I program in other languages.
OK so I factory reset my phone + wipe sd card, and surprisingly Google Play automatically updated to latest v5.0.38 automatically no need to side load it but main problem still there updating apps still downloading whole app instead of only actual update size. I think this is problem of ROM of Android One.(I am still not sure how many people facing this issue.) But I cant update whole app again and again. Please someone find solution of this or contact Google or Micromax for this issue.
yes bro.. u may be right. I faced the same issue. finally I got rid of tat by shifting to PAC ROM. jus move on to custom rom. tats the only soln for now
sent from satellite fone.
Facing same issue !
Same here too. Any solution for this ?

Received Fire Phone with 3.5.0 Should I Upgrade ?`s

Received the FP with 3.5.0 att locked with unlock code from ebay deal today and now trying mess with it and got few questions that I just need to ask before I go any further in the path of no return.
First I`ve been somewhat following each steps here at this Guide to make fire os look normal. Everything is going smoothly and got all the way up to firing up google play but unable to download any apps from it. I`m guessing becuase I have missed installing the vending.apk before opening play store? Now I`m unable to install the vending.apk at all. Is it crucial to follow each install order of google services? Or am I missing something that`s preventing vending.apk install?
I`ve already factory restore the phone to try again but before redoing everything should I even try to upgrade to the most recent 4.6.1 and root at 4.6? Just asking because I`ve read somewhere along the way that upgrading to 4.6 solves some problems with play store. Or is it still best to stay at 3.5 for rooting purposes. I would like to eventually put CM11 in it.
Should I try to unlock the phone first with the included code from ATT before going all the way with rooting and to CM11? Will I be able to enter code with CM11? I just don`t have a nano SIM at the moment and just can`t wait to tinker with the phone. Or should I just stop at root/Google Now Launcher and unlock before trying CM11?
Is safe safestrap like just CWM recovery? Can I Make a backup of the rooted stock Fire OS 3.5 and install CM11 now and revert to stock if I need to?
I'm waiting for mine to come. Ordered from same deal I'm guessing. You can cut your current sim card down to nano if you really want to be adventurous.
How did the prime membership go? Any issues with getting the free year?
Sent from my SM-N9005 using Tapatalk
Yeah I`ll be cutting in-laws sim so I`ll wait until I sort the phone out. Prime automatically adds a year after putting your amazon email account when registering the phone, went through without a hitch.
Ok so factory restore didn`t really restore everything. Google now app launcher still on when it booted up. So this will be a fun night. Any suggestions on what should I try next?
Is Safestraponly for 4.6?
I wish I knew. I haven't gotten mine yet so I've just been trying to read and prepare.
Have you unlocked the phone?
Sent from my SM-N9005 using Tapatalk
---------- Post added at 08:46 PM ---------- Previous post was at 08:44 PM ----------
Have you checked this thread?
http://forum.xda-developers.com/showthread.php?p=60536921
I believe you would need to unlock the phone in order to install this update since its for an unlocked phone. But I could be wrong.
Sent from my SM-N9005 using Tapatalk
Not yet need nano sim card to unlock and that`s why I`m being wary on going through all the way tonight. They sent unlock code printed on a sticker with a disclaimer that basically saying once you claim the prime membership you are not able to return it. Found this unlock method for FP, does anyone knows other way of unlocking it without sim card?
I think you need a non att sim card so that it asks for the unlock code. That's going to be my issue. Don't know anyone with a non-att nano sim card
Sent from my SM-N9005 using Tapatalk
New to FP...one of the 2500 eBay purchasers
I'm in the same boat. Ordered my FP from eBay with the one year extension of Prime...so it was about $50 for the phone after tax and discounting the Prime membership. So my questions are...
1 - What is the best way to go to get Google apps working as I pretty much use much of the Google ecosystem. Should I sideload the Google stuff, or just root and go to CM11. I want to make sure I have all the LTE bands working and I'm not sure if CM11 changes the modem.
2 - If I stay with Amazon Android do I stay on Version 3 or upgrade to Version 4. Which works best with Google sideloads?
Any clear advice to a new user of FP. In the past I've had HTC and Samsung and always unlocked the bootloader and rooted. There is a lot in the forums I have to read but maybe somebody could encapsulate some advice to those peoples who seemed to have bought the eBay deal. Much thank for guidance from experienced users.
From my understanding, there is root for 4.6.1, and Google stuff seem to work better on 4.6.1. So I'm definitely planning on upgrading when I get the phone.
Sent from my SM-N9005 using Tapatalk
Ok found an old TMobile micro sim and just followed this guy and cut into nano and when I turned on the botched half rooted FP it just asked for the unlocked code and the code provided worked.
So this time I downloaded the Google services zipped file in this thread and jumped to his step 2 and when it came to step 2.iii I followed this guy`s instructions. I had to download es file explorer on amzon app store first so I can get to google services files that I had transferred from the comp. And turned off wifi so the auto update download will not finish downloading.
Basically I got google now launcher working fine was able to install the obligatory Facebook app until I updated the Market with Google play store. After that the dreaded "Google Play ervices has stopped" started popping.
I`m going to try to find a fix but if there`s none, it looks like updating to 4.6 would be the best route. Unless someone can give their 2 cents on this matter.
Ok so updated to 4.6 and rooted with kingroot. Play store worked great for few minutes andand found out about this white screen problem.
I`ll try to see how "stable" the cm11 which I doubt ready for daily use if not I`ll just have the inlaws use fire os. The update made it look closer to their old phone and actually not too bad. As long as they have facebook and candy crush they`re happy. Also mayday would actually benefit me in the long run
Update:
Used the apk files in this guide which looked newer versions and it seemed to do the trick this time while rooted with latest kingroot at 4.6. Even after I installed google now launch and google quick search which forced me to update the google services to use which also ended up updating the play store. So far no issues with play store.
Update:
Play store white death screen is back.......!!!!
I think I finally figured the fix for white death screen!!? The problem is ****ing google is auto updating the playstore automatically to a 5.xx version which breaks Playstore. Found the solution in this link. When GP auto update just disable/unistall updates and reinstall the older 4.6 GP or the last 4.8 GP apk version before 5.xx. Then I tried all possible options to block play store from auto updating. I used the Disable Services app method and the terminal emulator that someone suggested in the previous link. So far no white death screen.
Update:
Google managed to get around my solution and updated play store again, mfckers!
Any suggestions on how to block NSA auto updating play store?
I believe you need to use these on 4.6.1 http://forum.xda-developers.com/fire-phone/general/google-play-store-4-6-1-version-4-apks-t3098592 I never had an issue with it
phxal said:
I`ll try to see how "stable" the cm11 which I doubt ready for daily use
Click to expand...
Click to collapse
Its a very stable rom. I've been using it one week today. It got an update 3 days ago. You will get the "play services stopped working message" but that's happening with stock. Play store has opened every time I try it. Unless you like fire os better I'd try the ROM. I was skeptical too. In fact, I wasn't anticipating using this phone as my daily driver but that's exactly what happened. Just make a backup of stock to be safe.
Finally I got everything figured out. I just flashed the flashable stock 4.6 image from this thread through safestap. And every google services seemed to be working properly now (Maps, Hangouts,Navigation etc.). I just installed nova launcher and the phone feels like regular android phone right now.
I'll stick with the fire os for now as I need the phone to be really stable before handing the phone to the in laws.

Can't download update for moto 360 1rst gen

Hi everyone !
First time posting on xda forums.
I bought on Friday a moto 360 1rst gen. I tryed to update it, but i have some errors messages.
Occasionally I got a notification that says "Can not download the update. The space is not sufficient to download the system update"
When I go into the settings to start the update manually, another message appears "insufficient space".
I rebooted several times the watch and uninstalled the application android wear (I also tested with an older version).
I tried this on my main phone (Note 4) and another (xperia z1 compact) but the notification and error message always appear.
When I put the watch in charge and remove it another message appears "Charge your watch to receive update MEC231". I put the watch in charge and I see the android wear application downloading something in the data options. When the watch is charged to 100% I remove it from the base to start the update but the same message appears that says charge your watch althought the watch is at 100%. I left the watch an afternoon and an evening on the base, when I removed it the message "insufficient space" appeared again in the update options.
I do not know what to do repair the problem. Could you help me please ?
OS version is 4.4.w.2, android wear 1..0.1.1526154 and google play services 8..4.89
Sorry for my english :silly:
Same things for me...
Moto 360 G1 with 2 days of life.
Same FW and Android Wear versions.
I've also tried to install an old version of Android Wear but no way to let him download the firmware.
I've also tried with an old Smartphone with 0 app (so it doesn't sync)...Same Thing
I've reset him contless times but no way.
Any suggestion is appreciated
Try updating by following this procedure:
http://forum.xda-developers.com/mot...1-1-update-t3139099/post63853874#post63853874
Hi thanks for replying =)
I already done this procedure on two different phones but doesn't work :/
But to besure, when it says "delete the lastest version of Android Wear on your phone", that means uninstal android wear from the phone ?
Zechiel said:
Hi thanks for replying =)
I already done this procedure on two different phones but doesn't work :/
But to besure, when it says "delete the lastest version of Android Wear on your phone", that means uninstal android wear from the phone ?
Click to expand...
Click to collapse
Yes, delete the latest Wear app on phone and install older one from apkmirror.
Ok thanks^^
But that's what i've done but doesn't work.
I think i should return the watch to see what's happening.
Thanks a lot for help :good:
Think I'm on the same boat.. I tried this procedure last night a couple times with different phones and didn't seem to get it to work just keep getting the same msgs and notification saying couldn't download update not enough space. Just brought the watch last week brand new..
I've also tried different things but the problem persist.
I've also tried with a smartphone with Android 5.1 and an old Android Wear Apps (June 2015 1.1.1.....) but nothing.
Reading this post https://plus.google.com/communities...9/stream/b5bc95e0-4396-4569-b121-d88ff15986fb seems that Motorola know the issue and in few days will resolve the problem.
Not so good for a Watch with 2 days of life...
So maybe the problem will get fixed? It's annoying... I dont think I even experienced all the watches features
I think so, we just have to wait a few days...
Okay thanks for information
Hope they will fix it.
I've unpaired and reset my watch. Repaired. Now it's going to download the update.
Inexplicable... Or maybe Motorola has worked hard...
Ok i'll try the same.
Edit : Yeah it's working !!!! thx Dimoz =)
Edit 2 : I talked too fast, now i have "[public] full ota to LCA44b" error message.
Do not feel bad. I have factory reset my watch 3 times, each time, the watch will download the new update. Be at 100% battery, yet still tell me either an error has occurred or charge watch before installing (again it is at 100%). At this point, I will wait
Mine is in its box while I contemplated to return it or not so when I get home I am going to give this another try
I charged it fully and went into settings and update. And it updated. It updated to android 5.1.1 is that the most up-to-date?
Same for me, finally get updated to 5.1.1 :laugh:
The latest version is 6.
I'm waiting for this update.
Mine has first update to 5.1.1.
Then i've reset the device. paired and already checked for update (always under charge) and it has found the 6.0.1 update.
Update and reset. Current version 6.0.1 build MEC23I
Now, actually, is an usable smartwatch!
I will give it a chance
Same it worked out. Im very surprised but they seem to have fixed the issue for sure.

Android nougat

Have just purchased this device sim free from carphone warehouse in the uk and.its still on android 6.0
Tried the updater and it says nothing available.
How do I get the latest update?
Ok so I have downloaded what I think is the right firmware and have put it in a folder called dload.
I go to the updater and it says nothing available and no option for local update. Have also tried to get it to install from power off but says failed
Any ideas?
Solved
did you dload via FFinder ?
Is everything working...specially theme manager
Yes and all working fine. During the installation it did say after getting to 80-90% that the install had failed however when the phone rebooted itself and unchecked the about phone section it then said it was on android 7.0
Further to above it does seem that my theme store is not working. Never really noticed as I was using nova.
Not sure how I fix that?
hpsauce37 said:
Further to above it does seem that my theme store is not working. Never really noticed as I was using nova.
Not sure how I fix that?
Click to expand...
Click to collapse
Take a look here.
well...your now part of a lot of people with that problem...i used to be one too...
theres 2 ways to fix...
ROOT the device or...
login to huawei id...then it should be fixed in the next 24-48 hours .
i was rooted but re putted my mla-l03 in original state with locked bootloader....then theme got fixed in less than 24 hours (for me)
Well it turns out I was not logged into Huawei id however have done that now but the option is still not there. I'll give it a few hours and see what happens. Otherwise looks like I'm just downloading themes from elseware and moving them to the themes folder

Categories

Resources