Develop Bugs

[DEV][ROM][JB 4.2.2][Unofficial] CM10.1.0 RC2 [30/05/2013]

CM 10.1.0 RC2 code base has been released and here it is for your flashing pleasure!
DISCLAIMER:
I am new to android development so more of a builder than a developer at the moment. So please do BACK UP your phone before you get started. If you know how to fix an issue in the ROM then feedback is more than appreciated. Bug reports are welcome, however please understand that I probably won't be able to figure out the solution without help. You can expect that CM code updates will be rolled into this ROM as these come out though.
For those of you looking for Skype audio this ROM does not yet fix it BUT I have tried the tinyalsa_audio stuff from Adam77Root and that does get Skype working just fine, but then it messes up your phone audio to where you don't hear anything or send anything out about 3/4 of the time. So we're getting close but not quite there yet... Oh and bluetooth calling was not fixed when skype worked, so there's something else wrong there...
RC1 was accidentally released with the tinyalsa_audio driver.. So this is RC2 with the "correct" libaudio which means skype is broken but calls work...
Using CWM:
1) BACK UP your current ROM!!!
2) Preform wipe / factory reset
3) Flash the ROM: cm-10.1-RC2-20130530-UNOFFICIAL-i927.zip (MD5 = 2e65e45bdc7539d5260062abdf6cd1cd) Mirror 1
4) Optionally flash GAPPS: gapps-jb-20130427-nonneon-tonyp.zip (MD5 = 13fc57e24ead77ec2613efd643af3800)
Stuff that I've noticed that looks to be fixed / has changed since M3:
- Moved over to KickAss kernel and battery life now totally rocks!
- Picture editing in the gallery is also working fine now.
- HDR photo capture looks to be working just fine also...
- Lock screen lag much less noticeable, but I do sometimes need to press the button twice...
Known issues without workarounds:
- Audio in skype is there but plays back at wrong rate (slower than normal, woman's voice sounds like a man's)
- I was not able to get my two bluetooth headsets working but bluetooth GPS works fine
Known issues with workarounds:
- GPS works great and fast but reports 0-2 satellites only, NMEA data stream seems to be incorrect, so parsing this data may be touchy in some apps
- Pictures taken by camera are shown rotated 90 degrees (then can be manually rotated within the gallery app)
Please don't report any of the above known issues. General CM 10.1 bug tracking thread <- Please check here before posting a bug report!
I'm sure there are others but I've not noticed them yet. I don't use a hands free but I can confirm the bluetooth does work with an external GPS for instance.
Change log:
20130530 - Corrected call audio issue and CM 10.1.0 RC2 code base
20130525 - Moved to KickAss kernel and CM 10.1.0 RC1 code base
20130503 - Fixed gallery pic editing, update OTA image
20130502 - Combined LiteKernel built 20130418, broke the gallery pic editing, added OTA support
20130417 - Combined LiteKernel built 20130414 into the ROM, no need to flash kernel seperately
20130416 - New LiteKernel build by bubor
20130415 - WiFi fix by bubor applied
20130412 - M3 code release, still using LiteKernel from 20130222
20130405 - Rolled back non-monthly code updates to revert this back to the original M2 code release. Corrected build environment to generate proper boot.img, No longer using the one from the LiteKernel which means that the LiteKernelManager is not messing around with settings now.
20130404 - Used the 2013/02/23 branch of the device tree and also re-synced with the CyanogenMod source. SD card mappings now match the CM10.1 later builds so recommend wiping and re-installing fresh for this one,
20130402 - Build LiteKernel into the ROM so no need to flash the kernel separately
Credits:
- KickButtowski for the kick ass KickAss kernel
- tonyp for the non-neon GAPPS package
- bubor: WiFi tether fix and new kernel that fixed data usage, image editing in galley and google now hotword detection as well as new GAPPS
- Adam77Root for the libaudio code that fixed the camera audio in video recordings
- yohan4ws for pointing me towards Adam77Root's libaudio stuff
- gtmaster303: CM 10.1 bug tracking thread maintenance
- The-Covenant team: For the device tree and vendor proprietary files
- dman3285: For the tutorial on building CM10 and CM10.1 from source, and all your work getting this setup
- thegreatergood: For the LiteKernel source and binary
If I've missed anyone apologies in advance and just let me know and credit will be added...
And here is the ling to my device tree should anyone want to follow along. Seperate branch available for the tinyalsa_audio for the more adventurous ones.

Reserved...

sweeeet!

wow, another rom i will try it tomorrow, juts 1 question, if i flash lite kernel the wifi will work? and how about ohter mods or skype?
I am gonna try it tomorrow, thanks thanks

Awesome, thanks!
Can you please list the non working things you have already discovered?

lorddavid said:
wow, another rom i will try it tomorrow, juts 1 question, if i flash lite kernel the wifi will work? and how about ohter mods or skype?
I am gonna try it tomorrow, thanks thanks
Click to expand...
Click to collapse
Correct - If you flash the LiteKernel on top of the ROM then the WiFi will work.

braintweaker said:
Awesome, thanks!
Can you please list the non working things you have already discovered?
Click to expand...
Click to collapse
Done...

This is pretty much just a new build with all the upstream commits, correct?
I suggest everyone review my bug tracker thread before posting bugs, as these builds are one in the same rom...
http://forum.xda-developers.com/showthread.php?p=38339702

gtmaster303 said:
This is pretty much just a new build with all the upstream commits, correct?
I suggest everyone review my bug tracker thread before posting bugs, as these builds are one in the same rom...
Click to expand...
Click to collapse
Agreed.
This build is based on:
- CM 10.1 M2 release code base (released 4 Mar 2013 so the Feb ROMs are based off the M1 release)
- The-Covenant device tree and proprietary files which I assume have not been touched since end of Feb
- thegreatergood's LiteKernel binary which is the same as the other ROMs
So any issues that were related to the kernel or device specific stuff will still be there, but CM based issues may have been resolved. Case in point the audio playback lag is now fixed on my phone.
YMMV of course!

I am doing right now a backup of my current rom. I really want to see if skype and magic jack works now. I will post back in some hours.

Is bluetooth handsfree fixed in this build?

Re: [DEV][ROM][JB 4.2.2][Unofficial] CM10.1-M2 3/31/2013
One question. Do i need to flash the keyboard fix? and the rom is compatiblr with the mod to put external sd as internal? i try to flash but never boot. I will try again in a few moment
Sent from my SGH-I927 using xda app-developers app

jzamoras said:
Is bluetooth handsfree fixed in this build?
Click to expand...
Click to collapse
In my test both headsets connected fine but one gave no sound and the other gave me only static. Not sure if the mic was working on either one. I don't usually use bluetooth so can't say for sure but I think this is still an issue on this build at this time unfortunately.

lorddavid said:
One question. Do i need to flash the keyboard fix? and the rom is compatiblr with the mod to put external sd as internal? i try to flash but never boot. I will try again in a few moment
Sent from my SGH-I927 using xda app-developers app
Click to expand...
Click to collapse
You won't "need" to but the crashing keyboard gets annoying fast. So installation of a keyboard from the play store (I used the hacker's keyboard) is a must to make this usable. now if there is a "fix" available for the stock keyboard on the JB builds then let me know what it is and I'll see about adding it to the ROM by default.
As for the memory cards, the internal is mounted as /mnt/emmc and the external is mounted as /mnt/sdcard. Not sure if that answers your question...

spyke555 said:
In my test both headsets connected fine but one gave no sound and the other gave me only static. Not sure if the mic was working on either one. I don't usually use bluetooth so can't say for sure but I think this is still an issue on this build at this time unfortunately.
Click to expand...
Click to collapse
Is the same I got using AOKP. I guess I'll wait then.

spyke555 said:
You won't "need" to but the crashing keyboard gets annoying fast. So installation of a keyboard from the play store (I used the hacker's keyboard) is a must to make this usable. now if there is a "fix" available for the stock keyboard on the JB builds then let me know what it is and I'll see about adding it to the ROM by default.
As for the memory cards, the internal is mounted as /mnt/emmc and the external is mounted as /mnt/sdcard. Not sure if that answers your question...
Click to expand...
Click to collapse
I was talking about these patches http://forum.xda-developers.com/showthread.php?t=2067954
there is a patch for swap the external sd with the internal, and another for the keys in the keyboard.
Edit: i think that the keyboard patch no needed. But the Patch to swap the the external SD as internal, doesnt work. The rom never boot when i install it.
Another thing, its me, or the wifi is very very slow? i am downloading skype from the market and is taking so much.
Sorry if i wrote something bad :/

Just corrected the link to the LiteKernel, you may want to download this new link and re-apply to make sure you have the latest kernel installed. Trying to get this built into the ROM to avoid any further confusion...

Ok, i will try it again, but the skype/magicjack audio issue still exist

Just posted a new ROM build that now has the LiteKernel-20130222 built in. No need to flash separately. CM code is the same so no change there. If you already downloaded the 20130331 version and installed to 20130222 kernel then no need to re-download.
CM10.1-M3 release should be coming out shortly so do expect another update soon...

spyke555 said:
Just posted a new ROM build that now has the LiteKernel-20130222 built in. No need to flash separately. CM code is the same so no change there. If you already downloaded the 20130331 version and installed to 20130222 kernel then no need to re-download.
CM10.1-M3 release should be coming out shortly so do expect another update soon...
Click to expand...
Click to collapse
I'll jump as soon bluetooth thing is fixed

[ROM][4.4.4]AOSP

This ROM is based off AOSP
As it is AOSP it has next to no extra features but it is very smooth. In this ROM everything should work. HDMI, Radio, and no pause when recording.
Downloads
14-09-2014
-Latest source sync
-Thanks to @Phantasm4489 for fixing GPS, Auto Brightness and Audio in Radio.
25-07-2014
-Version 4.4.4
20-06-2014
-As of now it will be pure AOSP only modifications will be to the kernel and what is needed to make a installable zip
Previous 18-06-2014
Whats New
-Fixed Bluetooth
-Kernel now has smartx and weatley governors and the CPU is overclockable to 1890 and GPU to 300
-Reboot in power menu
-Clear All in Recent Apps
-Torch tile added but you need to load up torch once before tile will work. (Thanks to @Apology11)
Previous
Install Intructions
- Download to phone internal storage
- Load up TWRP or CWM and do a factory wipe if coming from ANY other ROM (otherwise you will get FC's this is a requirement)
- Install ROM
- Install GAPPS
Credits
billchen1977 for the kernel original thread
Apology11 for nearly EVERYTHING else
Bugs
Sources
AOSP Source
Kernel Source
XDA:DevDB Information
[ROM][4.4.4]AOSP, ROM for the Sony Xperia Acro S
Contributors
deedwar
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Testing
Created 2014-06-17
Last Updated 2014-09-14

AOSP! \o/
Been keeping an eye on this on github, absolutely great work. This will surely become my primary ROM. If I encounter any issues I'll provide logs.

Downloaded .. in the original thread he said Not working:
• Bluetooth A2DP
• SELinux (not instrested in it)
not working here also ???
Edit :
just awesome .. but there is a problem with bluetooth .. right ?

Nice... AOSP... Thanks!!!! =)
I'll try this weekend... If I can wait...
Edit:
Been waiting for this since I saw the thread on XS, so this is the new Rom you're talking about...
Great work as always!!!

Just updated with a bluetooth fix. Radio I will look into a bit more.

Aosp is different than cm .. Right ?
Sent from my Xperia Acro S using XDA Premium 4 mobile app

Mahmoud Halem said:
Aosp is different than cm .. Right ?
Sent from my Xperia Acro S using XDA Premium 4 mobile app
Click to expand...
Click to collapse
AOSP is stock rom
---------- Post added at 06:33 PM ---------- Previous post was at 06:09 PM ----------
I cant flash it appear failed, i used your beanstalk rom, and i wipe data, cache and sistem but nothing how can i flash it?

try flashing the boot.img first...

@deedwar is this a stable version? If radio is iffy how can we use this? Just to be clear when you say radio, radio is the fm radio or the radio antenna for service signal?

The new version brings an error while installing. "some symlinks failed" "error installind updater script".
I've downloaded the rom 3 times from different servers and the error is present all the time.
What's the problem?
Wipes are all done by me, also flashing the kernel with ADB extra.
I'm coming from mokee rom.

schnuff*1 said:
The new version brings an error while installing. "some symlinks failed" "error installind updater script".
I've downloaded the rom 3 times from different servers and the error is present all the time.
What's the problem?
Wipes are all done by me, also flashing the kernel with ADB extra.
I'm coming from mokee rom.
Click to expand...
Click to collapse
I just installed the system image to check on mine i didnt do a complete install of the ROM itself so that would explain why i didnt see the same issues. I will do a clean build and repost it tomorrow when i wake up. Sorry for that.
In the meantime i relinked the older version with the bluetooth problem and people can install that and just install the new version over the top when i release it tomorrow.
By radio i mean FM RADIO not mobile signal.

can i install the version with bluetooth fix without wipe data ? i'm nw using the the version without fix ?

Mahmoud Halem said:
can i install the version with bluetooth fix without wipe data ? i'm nw using the the version without fix ?
Click to expand...
Click to collapse
I think there is a problem on the new one as discussed in previous post...
Sent from my Nexus 7 using Tapatalk

teddy0209 said:
I think there is a problem on the new one as discussed in previous post...
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
aha thx i will wait to next update
but i feel my phone heated quickly in this rom .. it's be so hot

Mahmoud Halem said:
aha thx i will wait to next update
but i feel my phone heated quickly in this rom .. it's be so hot
Click to expand...
Click to collapse
haven't tried the rom yet, maybe this weekend...
I expect it to perform better than other roms though, because it's AOSP (Stock Android)...

Just updated, installed and worked for me over the top of the old version at the very least but i dont see why it shouldnt just work.

Couldn't wait for the weekend, so eventually flashed the Rom here at the office... =)
Working great so far, like a nexus...
Maybe we can call our device now, Acro S GPE... Lol... =)
Thanks Guys!!!

deedwar said:
Just updated, installed and worked for me over the top of the old version at the very least but i dont see why it shouldnt just work.
Click to expand...
Click to collapse
Thanks for the updated kernel!
I got one issue tough, the most recent update brakes compatibility with the Gravity box module (Xposed framework).
In my humble opinion, in AOSP the UI should stay unaltered/vanilla, it's what makes this ROM unique.
All customization can be done by the user with Xposed framework and the Gravity box module for AOSP.
For example:
Clear all in recent apps
RAM bar in recent apps
Reboot options
Tiles customization
Torch options
and further on...
Other pros:
Customizing is an option rather than hardcoded in the framework and forced upon the user.
Saves you time as a dev.
and further on...

perkabalo said:
Thanks for the updated kernel!
I got one issue tough, the most recent update brakes compatibility with the Gravity box module (Xposed framework).
In my humble opinion, in AOSP the UI should stay unaltered/vanilla, it's what makes this ROM unique.
All customization can be done by the user with Xposed framework and the Gravity box module for AOSP.
For example:
Clear all in recent apps
RAM bar in recent apps
Reboot options
Tiles customization
Torch options
and further on...
Other pros:
Customizing is an option rather than hardcoded in the framework and forced upon the user.
Saves you time as a dev.
and further on...
Click to expand...
Click to collapse
There is another branch that is there that i will compile from time to time that will be vanilla. However there are a few things i cant live without and while i do install the xposed framework i dont want to have to install a whole heap of mods just to do a few basic things.

deedwar said:
There is another branch that is there that i will compile from time to time that will be vanilla. However there are a few things i cant live without and while i do install the xposed framework i dont want to have to install a whole heap of mods just to do a few basic things.
Click to expand...
Click to collapse
I see, will take a look on github and see if I can compile the vanilla branch.

[ROM][UNOFFICIAL][4.4.4] CyanogenMod 11 + crDroid for Xiaomi MiPad

CyanogenMod 11 with crDroid additions for Xiaomi MiPad
!! IMPORTANT !!
xep.8800.org will be temporarely down from 29.03.15 for couple of weeks so it would be great if somebody do mirror of latest buld and post link here. Thx!
About:
Source built CM except proprietary blobs and binary kernel from stock MIUI rom.
This is not a port from another binary rom.
Click to expand...
Click to collapse
What's working:
It seems everything working for now..
Click to expand...
Click to collapse
Not working/Bugs:
"Wi-Fi region code" setting is broken. Do not touch it or it will break your wi-fi.
you tell me.. testing in progess..
Click to expand...
Click to collapse
Instructions:
1. Install CWM Recovery
2. Do Full Wipe If coming from another ROM
3. Flash ROM
4. Flash Google Apps (my recommendation is to install minipal gapps due to /system partition size limits)
5. Reboot
Click to expand...
Click to collapse
Multirom Instructions:
1. Install TWRP Multirom Recovery
2. Reboot into TWRP and install multirom-20150205-v30-UNOFFICIAL-mocha.zip
3. Click "Advanced->Multirom" and flash your desired second rom.
4. Return to the installed roms listing, click fresh installed rom and click "Remove boot.img" (Due to closed kernel sources kexec-hardboot is not implemented so we need to remove boot.img)
5. Reboot. Select your desired rom from multirom menu
Click to expand...
Click to collapse
Downloads:
cm-11-20150327-UNOFFICIAL-mocha.zip
CWM
Multirom:
TWRP_multirom-v2.8.4-mocha.zip
multirom-20150205-v30-UNOFFICIAL-mocha.zip
I don't know if it is actually compiled with TEGRA optimizations but have created CWM flashable zip with stock bionic libraries. You can flash it on top of CM installation:
tegra_bionic.zip
Changelog:
15.02.15
* apply qcom bionic optimization
* build.prop dalvik etc tweaks
02.02.15
* Reboot to recovery fixed
* Recents view proportion fixed
26.01.15
* Synced with CM repo
* have enabled Display mirroring (miracast) though it does not work with my EZ dongle, sound is ok but screen is black. May be it'll work with another dongles...
21.01.15
* Update to the latest kernel from stock MIUI
20.01.15
* Sleep issue fixed
* Adopt nvcplsvc for CM & implement Performance Profile selection
18.01.15
* Synced up with CM repo.
* Added USB Mass Storage mode for external sd. Though it does not work along with ADB Debug enabled, need to be switched off when using UMS mode.
17.01.15
* Switch to CM's audio_effects and make Dirac plugin work. Equalizer crash fixed.
Click to expand...
Click to collapse
Links:
http://github.com/cyanogenmod
http://github.com/cristianomatos
https://github.com/faust93
Click to expand...
Click to collapse
I take no responsibility for what this may or may not do to your device.
Do not forget to click Donate button! It makes me work harder!

Thanks Pumbaster for your work!

My device doesn't seem to go to sleep...
WakeLockDetector shows Android System --> ConnectivityService as the main issue. BetterBatteryStats shows the same...
I tried turning location services off, froze Mobile Data and Mobile Network Configuration in Titanium Backup but that doesn't help. No checking if the same wakelock appears with wifi off...
Anyone with any clue? Or the same problem?

Will check the ROM and tell you dagrim.
But first thing first, I have to install it. And I have 2 questions, to avoid screwing things.
- Does it works with TWRP instead of CWM?
- Is there a reason to have a June version of minimal gapps where a version of December exist?
Thanks to everyone in the process (romers, informers, helpers)

Krystanos said:
Will check the ROM and tell you dagrim.
But first thing first, I have to install it. And I have 2 questions, to avoid screwing things.
- Does it works with TWRP instead of CWM?
- Is there a reason to have a June version of minimal gapps where a version of December exist?
Thanks to everyone in the process (romers, informers, helpers)
Click to expand...
Click to collapse
I used pico gapps myself and the june version is way smaller then the december version, then again I actually did try the december version as well and it seemed to work fine. So not sure, apart from the size...
About TWRP vs CWM, not sure. Guess it also should work with TWRP but haven't tried... CWM is needed for True Dual Boot, but that seems bugged anyway.

By me too. Battery drain is to much, device don't go to sleep...

zolikaDB said:
By me too. Battery drain is to much, device don't go to sleep...
Click to expand...
Click to collapse
Yeah, seems to be a common issue.
My device only goes to sleep when wifi is turned completely off. When I have it set to turn off when display is off I still get the wakelocks. I also have set the scanning for open wifi to off, location services turned off, etc.
For now I flashed back to the 0114 version as that one is working fine here...
If I can share some logs or anything, I'd be more then happy to!

@dagrim1: I hope, Pumbaster make new, fixed build

I Encounter Graphical Glitches with 3rd Party Browsers (Opera and UC Browser)
Chrome works fine so far. Also heavy Battery drain an 17/1

@faust93: what is with battery drain?

Did a very dirty try or replacing frameworks.jar but that didn't work...
Saw some wifiStateTracker errors and that and ConnectivityService seemed to be part of the framework, that's why I gave it a shot. 0118 still has the deespleep/wakelock issue btw...

I don't really care about dual boot. MIUI has so much limits. Once I go to CM, I don't think I'll be able to come back to MIUI...
But I'll stick to CWM, just in case...

I just tried the wpa_supplicant.bin file posted by pumbaster on 4pda and it seems to solve the deepsleep issues!
Post 351 of the custom mipad 4.4.4. rom thread there...
http://xep.8800.org/mipad/wpa_supplicant.bin
Place in system/bin and set permissions to rwxr-xr-x
@faust93: I hope you don't mind me posting this here but I saw you posted links to the same location in the topic start, if so my apologies and I will remove it asap (but I am going to sleep now, so won't be up until next morning...)
Also had some iussues with stuttering video playback, but setting 'disable hardware overlay' in developer settings fixed that for now...
Thanks for the awesome work!

dagrim1 said:
I just tried the wpa_supplicant.bin file posted by pumbaster on 4pda and it seems to solve the deepsleep issues!
Post 351 of the custom mipad 4.4.4. rom thread there...
http://xep.8800.org/mipad/wpa_supplicant.bin
Place in system/bin and set permissions to rwxr-xr-x
@faust93: I hope you don't mind me posting this here but I saw you posted links to the same location in the topic start, if so my apologies and I will remove it asap (but I am going to sleep now, so won't be up until next morning...)
Also had some iussues with stuttering video playback, but setting 'disable hardware overlay' in developer settings fixed that for now...
Thanks for the awesome work!
Click to expand...
Click to collapse
Is this bin file integrated in 2015.01.18 build? What do you know about this ROM? Did you test it?

zolikaDB said:
Is this bin file integrated in 2015.01.18 build? What do you know about this ROM? Did you test it?
Click to expand...
Click to collapse
I don't believe it's integrated in 0118, think that fixes some sd stuff...
I am currently running the 0118 build (with the wpa_supplicant.bin file replaced manually) and seems to be working pretty fine. Had some video issues with a certain app (video jumping a bit, stuttering) but think I fixed that with 'disable hardware overlay' in developer options.
Without the replaced .bin I also had a problem with turning off and on wifi. It would work when booting, but if I turned it off I couldn't turn it on again... The replaced .bin also fixes that. Now checking if antutu finishes it's run...

@dagrim1: hope, Pumbaster fix this problem!

Just another small question: full wipe will delete the /data partition too right ? So the ROM zip file will be deleted too ? Or am I missing something ?
Thanks.

I tried to install with TWRP and when I reboot, I get to MIUI v6 so I guess it rebooted in the wrong system.

jastonas said:
I tried to install with TWRP and when I reboot, I get to MIUI v6 so I guess it rebooted in the wrong system.
Click to expand...
Click to collapse
Unfortunately I tried to install CWM with fastboot and it failed to install... No specific error message.
I have seen a port of TWRP for MiPad. Have you tried this one, or the standard one?

How I wish I could just flash CM on my MiPad...

Paranoid Android 6.0.3 - Geehrc (discontinued)

disclaimer :THIS IS UNOFFICIAL PORT
We are launching brand spanking fresh. All new features. New team members. New everything and we have made sure that everything that we are releasing has been polished to our best.
The main features and enhancements that you will probably end up noticing are our custom Quick Settings tile reordering functionality, floating window support, immersive mode, the new on-the-spot interface and CM Theme Engine. There's much more to come, so sit tight!
Feature highlights
Floating mode
Immersive mode
On-the-spot controls
Quick settings re-order
Paranoid OTA (Updates)
Battery styles
Advanced power dialog
Quick pull-down
Theme engine
BUGS:NFC (i hope fix it in few days)
First Boot Time may 10 minute
Download
AOSPA
Changelogs
As we're getting back into the thread game, keeping up with threads and updating them as per changelogs can be too hectic given our schedule. However, very detailed changelogs always go up on our Google+ page, follow us for constant updates!
Instructions & requirements
We highly recommend you to follow these instructions very carefully. Users usually tend to skip a few steps and eventually fall in trouble. Are you with me? Good. Let's get this train going.
Just a few things to keep in mind first -
If you're coming from another ROM / Stock, your system data (not internal storage) will have to be wiped. This includes apps, accounts, messages, call logs etc.
There's been some users complaining about different GAPPS variants messing up installs and causing a ton of issues. Upon investigating it seems OpenGapps Mini/Nano and Banks GAPPS work best.
Understand that Paranoid Android is a custom ROM and it might lead to addiction as it's relatively good. We shouldn't be accused of anything just incase your cat starts drinking wine. Things get a little woozy in the Paranoid World.
Some brain might be involved if things go wrong. Not a lot though, as much to solve what's 1+1.
Okay let's get to the main bit -
Once you have all the required files - boot into recovery and wipe the bananas out of your device. Get into the wipe menu and wipe data, system, cache and dalvik cache (basically everything except Internal Storage).
Once wiped, get into the "Install from zip" menu and select the ROM zip. (pa_bacon_6.x...). Once added to the install queue, TWRP will ask you if you want to add more zips into the queue - Click on "add more zips" and select the GAPPS package.
Swipe the bar on the bottom to flash/install zips. Once both zips are done installing - Reboot into system and set-up your device, do not do anything else.
Once you're done setting up your device - well that's when you're done. One thing though - Make sure you DO NOT INSTALL any other zip in the same queue as the ROM & GAPPS. Meaning, do not flash anything like a kernel or a root package while installing the ROM. We recommend you do that AFTER you're done setting up your device.
Important / Useful links
GAPS
SuperSu
As always, we listen to what you have to say. Help us make PA better by submitting good bug reports possibly with a log attached. Learn how to take logs HERE. Submit bug reports and we'll try to iron out issues as soon as possible - it really helps a lot.
Cheers and #StayParanoid!
Device Source :device-kernel-vendor
Special Thanks
@xboxfanj HE IS REALY PERFECT MAN. THX FOR EVERYTHING
@Kevinjoa
XDA:DevDB Information
Paranoid Android 6.0.3 - Geehrc (discontinued), ROM for the LG Optimus G
Contributors
metrixx02
Source Code: https://github.com/AOSPA
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Based On: AOSPA
Version Information
Status: Beta
Beta Release Date: 2016-07-31
Created 2016-07-30
Last Updated 2016-10-28

Screenshots
Screenshots

Reserved

cool, i will become an official tester of this ROM and will shall present bugs, errors and i will sending Logcats. Sorry for my bad english.✌

OK first, when you record a note voice, audio heard saturated. second: when you open often the camera and you spend to other applications can get a time when no longer opens and need to restart the phone. third: the ROM should bring a file manager by default

Ronaldj25 said:
OK first, when you record a note voice, audio heard saturated. second: when you open often the camera and you spend to other applications can get a time when no longer opens and need to restart the phone. third: the ROM should bring a file manager by default
Click to expand...
Click to collapse
i m looking some small fixes i hope looking next time ur issues could u send me log ?

Could you say is that rom have wakelock problem too ?

JacubSKY said:
Could you say is that rom have wakelock problem too ?
Click to expand...
Click to collapse
yea i know have small wakelock issues but amplify solve it

PA 6.0.1 Review
First: Thank you for your work :good:. First I tried the Kevinjoa CM 13, but it has a lot of soft reboots, so I moved here.
1) Installation: Before you beginn, you need TWRP (for e975), which you have to install via ADB (USB + PC) ask Dr. Google about that. Additional to PA you need GAPPs (I choose mini-Version) and it is useful to have chainfires SuperSU.zip (UPDATE-SuperSU-v2.76-20160630161323.zip). All 3 zips can be installed via twrp.
2) Limitations:
I use PA-Version pa_geehrc-6.0.1-20160730 since Aug 10th (2016). I don't have any reboots or something. Everything ist running smothly.
What is working:
- Wifi
- Mobile Data
- Camera
- Phone
- Bluetooth
- GPS
What is NOT working:
- NFC (there seems to be no option to activate it) I love NFC!
- IPv6 **
- Bluetooth sometimes has trouble to connect (Garmin forerunner + Pioneer headset)
- Mobile Data (HSDPA): Whatsapp + Mail is not working, while signal messenger and Chrome are working
** I had to disable IPv6 with "IPv6 Disable Tool", otherwise I encountered problems with mail, etc. I have native IPv6 for internet and the ipv6-stack seems to be the problem: "Socket timeout: failed to connect to server". Update: This is related to my mailprovider (hosteurope.de), which has a workaround.
The version seems to be battery draining, my phone was empty after less than 12 hrs. I will look to the reason.
OK guys, I will continue on this post.
Regards
Garmintroll
Update: I moved to resurrection remix, because oft Bluetooth and mobile data trouble.

garmintroll said:
First: Thank you for your work :good:. First I tried the Kevinjoa CM 13, but it has a lot of soft reboots, so I moved here.
1) Installation: Before you beginn, you need TWRP (for e975), which you have to install via ADB (USB + PC) ask Dr. Google about that. Additional to PA you need GAPPs (I choose mini-Version) and it is useful to have chainfires SuperSU.zip (UPDATE-SuperSU-v2.76-20160630161323.zip). All 3 zips can be installed via twrp.
2) Limitations:
I use PA-Version pa_geehrc-6.0.1-20160730 since Aug 10th (2016). I don't have any reboots or something. Everything ist running smothly.
What is working:
- Wifi
- Mobile Data
- Camera
- Phone
- Bluetooth
- GPS
What is NOT working:
- NFC (there seems to be no option to activate it) I love NFC!
- IPv6 **
** I had to disable IPv6 with "IPv6 Disable Tool", otherwise I encountered problems with mail, etc. I have native IPv6 for internet and the ipv6-stack seems to be the problem: "Socket timeout: failed to connect to server".
The version seems to be battery draining, my phone was empty after less than 12 hrs. I will look to the reason.
OK guys, I will continue on this post.
Regards
Garmintroll
Click to expand...
Click to collapse
Thx ur commends .i know that bugs first i will said that battery issue is wakelock problem if could u flash Xposed u will use Amplify and solve this problem but absolutely I look at this problem first chance .I know u are not alone .NFC is really problem.i did Smal compiles from NFC but can't solve .I don't know what is the problem exactly but I contact my friend I hope fix it soon .ipv6 issue is device source problem i could not anything now.when I solve NFC and wakelock issue I will interest it .but not have any idea this problem.i m interesting AICP usually.but when I have free time I look .
I don't understand what do you mean ur 1. Comment but it is help for u.
I m useng twrp geehrc version 3.0 if u want I can upload it .every time I did full wipe and flash ROM+open gaps aroma +SuperSU (any version)+xposed+viper4ndroid .and not have any problem
But if u want use adb it is not problem can u do my steps but I don't recommend windows adb I use everytime Linux terminal and adb .so u can't usr aroma installer in adb but I hope open gaps stock is solve ur problem.
I did not upload last build s .I m really sorry basketbuild is going maintances .i bought yesterday one host and domain I m planning use h5ai system and upload my works to domain adres .when I will do this share it .
this work my hobby.i m interesting free times .i did not fallow this forum everyday because i m working robotic hands Project but if u want contact me using hangouts i hope help for u quickly than forum

pa 6.0.3 is up

How to enable hardware key backlight? Is there any option in the settings to configure it?

Working great on an old Sprint LG LS970 - thanks!
Question: Sprint/Ting 4G works, Sprint/Tello data does not work. Have attempted various APN editing tricks, but no dice. Any suggestions?

NFC
metrixx02 said:
pa 6.0.3 is up
Click to expand...
Click to collapse
Any news about NFC?

tdurack said:
Working great on an old Sprint LG LS970 - thanks!
Question: Sprint/Ting 4G works, Sprint/Tello data does not work. Have attempted various APN editing tricks, but no dice. Any suggestions?
Click to expand...
Click to collapse
Tello activate your phone as a modem APN works for me:
user ID: [email protected]
APN: mi.pamsn

[ROM][unified][4.4.4] OmniROM

OmniROM
[#KITKAT]
for Samsung Galaxy Nexus (Unified)
​
[#WHATSOMNI]
[#WARRANTY]
Downloads:
[#DLGITHUBIO]
[#INFOOMNI]
Specials added on top of Official OmniRom Source
All in One Animation Control
Battery Saver mode
On-The-Go mode
Implement App circle sidebar
follow dark 4.4 UI
Those features have never been ready for official Omni, but people spend a lot of time writing those features and i really like those.
I am trying to release an security update monthly after google publish android security bulletins.
Support development
[#DONATETOME]
XDA:DevDB Information
[unified][4.4.4] OmniROM, ROM for the Samsung Galaxy Nexus
Contributors
Android-Andi, Ziyan
Source Code: https://github.com/omni-security
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x
Version Information
Status: Stable
Current Stable Version: Final Build availabl
Created 2017-08-12
Last Updated 2017-08-18

Hello everyone, first of all, great work @Android-Andi thank you to take the time to support our old device !
And then sorry for my noob questions but :
- I didn't quite understand the difference between device specific and unified builds and I don't want to make a mistake flashing the wrong one.
- What is the main difference between Omni 4.4, Omni 6.0 or Slim 6.0? I want to use one of those but I don't know which one I think Omni 4.4 is the closest from what I had with the official Jelly Bean ROM and the 2 others are optimized version of Marshmallow. And is Slim 6.0 faster than Omni 6.0?
Thank you again

Radder124 said:
I didn't quite understand the difference between device specific and unified builds and I don't want to make a mistake flashing the wrong one.
Click to expand...
Click to collapse
Unified builts are for all types of tuna: Maguro, Toro, Toro+. When booting only the needed (device specific) drivers are loaded, but the drivers fir all supported devices are on board...

Unified works on all tuna variants: maguro, toro and toroplus at same time. It detects your variant on first boot and places needed files. That's the one I'll compile in future too.
Which rom is the best? Use the power of your TWRP and try it out. Test one, check if it fits your needs. If not, make a backup and try a different rom.

Android-Andi said:
Which rom is the best? Use the power of your TWRP and try it out. Test one, check if it fits your needs. If not, make a backup and try a different rom.
Click to expand...
Click to collapse
I can ask you a different question With all the new ROMs, I don't know which ROM you would like to receive bug reports from. Crash logs, etc. I know there is no point giving you CM12.1 crash logs. Which ROM would you like us testing and reporting bugs from?

Thank you for providing this ROM! I finally found a ROM with a working camera for the Gnex with security patches (from 2017-07).

...anyone gotten Xposed Framework installed/working with this? Halp

JLsoft said:
...anyone gotten Xposed Framework installed/working with this? Halp
Click to expand...
Click to collapse
There's somewhere an updated version flying around on XDA, maybe you'll find it (i don't have it anymore)

JLsoft said:
...anyone gotten Xposed Framework installed/working with this? Halp
Click to expand...
Click to collapse
try this

@Android-Andi is it possible to use this ROM with F2FS file system? Which DDK version is included in this ROM? Thank you for your contribution.

Those who are on 4.4:
AOSP Browser was removed for security reasons. Most lightweight Browser use KitKats webview which isn't up to date any more and there's ATM no proper way to update it.
You should use a browser which has its own webview implementation like Chrome, Firefox or Chromium.
From what I have tested Chromium seems to be a good solution. Here's my self compiled Chromium:
https://github.com/andi34/prebuilt_chromium/raw/master/ChromePublic.apk
(It's only missing h264 encoder for legal reasons...H.264 is not a free codec and I don't have the license for distributing)
For Android 5+
https://github.com/andi34/prebuilt_chromium/raw/master/ChromeModernPublic.apk
For Android 7+
https://github.com/andi34/prebuilt_chromium/raw/master/MonochromePublic.apk

New builds are up.
Switched to default libion, thx to @Ziyan and @amaces !
Note: don't flash any custom kernel on this build (also AnyKernel isn't compatible ATM)!

I've been away from the scene for a while so please catch me up. Does this rom bypass carrier limitations when using usb tether?

madspeed said:
I've been away from the scene for a while so please catch me up. Does this rom bypass carrier limitations when using usb tether?
Click to expand...
Click to collapse
Yep, these custom ROMs have nothing to do with carriers

March update is online. Enjoy!

Dear developer,
firstable many thanks for your Rom
I was using OMNI 4.4.4 dated 2015 but I was living issue with GMAIL, HANGOUT and GDRIVE
Today I discovered your product and Installed it on my MAGURO with a clean installation
Unfortunately after few hours I am suffering reboot
The system boots well but after few seconds it reboots itself ... continuosly ...
I am using omni_tuna-4.4.4-20180311-1556
I used GAPPS open_gapps-arm-4.4-pico-20180427
I rooted with SUperSU 2.82 R5
I tried to wipe cache, dalvik-cache, system and reinstall the rom and the gapps wo success
I tried to remove root wo success
HAve you some idea to help me ?
Thanks
Paolo
[EDIT]
I wiped all (clean installation) and installed the older version of rom (omni_tuna-4.4.4-20180128-0005)
[I noted that this version is bigger than the newer of around 30MB ...)
Same GAPPS af above
Same root of above
It runs well now ... cross the fingers and stay tuned

People having issues on latest build could try https://forum.xda-developers.com/showpost.php?p=76429699&postcount=188

The request from root was one of my suspect
Do you suggest to flash new kernel after last updated ROM, gapps and root and so before the first boot ?
Do you confirm that this workaround is not necessary with the previous version ?
Are you able to identify which version needs and which didn't ?
For instance I am using the January version .... Did I need to flash new kernel ?
Inviato dal mio Galaxy Nexus utilizzando Tapatalk

It could be it's needed on all KK roms since end of last year. But only works for latest builds using default libion.

Android-Andi said:
It could be it's needed on all KK roms since end of last year. But only works for latest builds using default libion.
Click to expand...
Click to collapse
Excuse my noob ... What does it mean default libion ?
Inviato dal mio Galaxy Nexus utilizzando Tapatalk