CM 10.1.0 RC2 code base has been released and here it is for your flashing pleasure!
DISCLAIMER:
I am new to android development so more of a builder than a developer at the moment. So please do BACK UP your phone before you get started. If you know how to fix an issue in the ROM then feedback is more than appreciated. Bug reports are welcome, however please understand that I probably won't be able to figure out the solution without help. You can expect that CM code updates will be rolled into this ROM as these come out though.
For those of you looking for Skype audio this ROM does not yet fix it BUT I have tried the tinyalsa_audio stuff from Adam77Root and that does get Skype working just fine, but then it messes up your phone audio to where you don't hear anything or send anything out about 3/4 of the time. So we're getting close but not quite there yet... Oh and bluetooth calling was not fixed when skype worked, so there's something else wrong there...
RC1 was accidentally released with the tinyalsa_audio driver.. So this is RC2 with the "correct" libaudio which means skype is broken but calls work...
Using CWM:
1) BACK UP your current ROM!!!
2) Preform wipe / factory reset
3) Flash the ROM: cm-10.1-RC2-20130530-UNOFFICIAL-i927.zip (MD5 = 2e65e45bdc7539d5260062abdf6cd1cd) Mirror 1
4) Optionally flash GAPPS: gapps-jb-20130427-nonneon-tonyp.zip (MD5 = 13fc57e24ead77ec2613efd643af3800)
Stuff that I've noticed that looks to be fixed / has changed since M3:
- Moved over to KickAss kernel and battery life now totally rocks!
- Picture editing in the gallery is also working fine now.
- HDR photo capture looks to be working just fine also...
- Lock screen lag much less noticeable, but I do sometimes need to press the button twice...
Known issues without workarounds:
- Audio in skype is there but plays back at wrong rate (slower than normal, woman's voice sounds like a man's)
- I was not able to get my two bluetooth headsets working but bluetooth GPS works fine
Known issues with workarounds:
- GPS works great and fast but reports 0-2 satellites only, NMEA data stream seems to be incorrect, so parsing this data may be touchy in some apps
- Pictures taken by camera are shown rotated 90 degrees (then can be manually rotated within the gallery app)
Please don't report any of the above known issues. General CM 10.1 bug tracking thread <- Please check here before posting a bug report!
I'm sure there are others but I've not noticed them yet. I don't use a hands free but I can confirm the bluetooth does work with an external GPS for instance.
Change log:
20130530 - Corrected call audio issue and CM 10.1.0 RC2 code base
20130525 - Moved to KickAss kernel and CM 10.1.0 RC1 code base
20130503 - Fixed gallery pic editing, update OTA image
20130502 - Combined LiteKernel built 20130418, broke the gallery pic editing, added OTA support
20130417 - Combined LiteKernel built 20130414 into the ROM, no need to flash kernel seperately
20130416 - New LiteKernel build by bubor
20130415 - WiFi fix by bubor applied
20130412 - M3 code release, still using LiteKernel from 20130222
20130405 - Rolled back non-monthly code updates to revert this back to the original M2 code release. Corrected build environment to generate proper boot.img, No longer using the one from the LiteKernel which means that the LiteKernelManager is not messing around with settings now.
20130404 - Used the 2013/02/23 branch of the device tree and also re-synced with the CyanogenMod source. SD card mappings now match the CM10.1 later builds so recommend wiping and re-installing fresh for this one,
20130402 - Build LiteKernel into the ROM so no need to flash the kernel separately
Credits:
- KickButtowski for the kick ass KickAss kernel
- tonyp for the non-neon GAPPS package
- bubor: WiFi tether fix and new kernel that fixed data usage, image editing in galley and google now hotword detection as well as new GAPPS
- Adam77Root for the libaudio code that fixed the camera audio in video recordings
- yohan4ws for pointing me towards Adam77Root's libaudio stuff
- gtmaster303: CM 10.1 bug tracking thread maintenance
- The-Covenant team: For the device tree and vendor proprietary files
- dman3285: For the tutorial on building CM10 and CM10.1 from source, and all your work getting this setup
- thegreatergood: For the LiteKernel source and binary
If I've missed anyone apologies in advance and just let me know and credit will be added...
And here is the ling to my device tree should anyone want to follow along. Seperate branch available for the tinyalsa_audio for the more adventurous ones.
Reserved...
sweeeet!
wow, another rom i will try it tomorrow, juts 1 question, if i flash lite kernel the wifi will work? and how about ohter mods or skype?
I am gonna try it tomorrow, thanks thanks
Awesome, thanks!
Can you please list the non working things you have already discovered?
lorddavid said:
wow, another rom i will try it tomorrow, juts 1 question, if i flash lite kernel the wifi will work? and how about ohter mods or skype?
I am gonna try it tomorrow, thanks thanks
Click to expand...
Click to collapse
Correct - If you flash the LiteKernel on top of the ROM then the WiFi will work.
braintweaker said:
Awesome, thanks!
Can you please list the non working things you have already discovered?
Click to expand...
Click to collapse
Done...
This is pretty much just a new build with all the upstream commits, correct?
I suggest everyone review my bug tracker thread before posting bugs, as these builds are one in the same rom...
http://forum.xda-developers.com/showthread.php?p=38339702
gtmaster303 said:
This is pretty much just a new build with all the upstream commits, correct?
I suggest everyone review my bug tracker thread before posting bugs, as these builds are one in the same rom...
Click to expand...
Click to collapse
Agreed.
This build is based on:
- CM 10.1 M2 release code base (released 4 Mar 2013 so the Feb ROMs are based off the M1 release)
- The-Covenant device tree and proprietary files which I assume have not been touched since end of Feb
- thegreatergood's LiteKernel binary which is the same as the other ROMs
So any issues that were related to the kernel or device specific stuff will still be there, but CM based issues may have been resolved. Case in point the audio playback lag is now fixed on my phone.
YMMV of course!
I am doing right now a backup of my current rom. I really want to see if skype and magic jack works now. I will post back in some hours.
Is bluetooth handsfree fixed in this build?
Re: [DEV][ROM][JB 4.2.2][Unofficial] CM10.1-M2 3/31/2013
One question. Do i need to flash the keyboard fix? and the rom is compatiblr with the mod to put external sd as internal? i try to flash but never boot. I will try again in a few moment
Sent from my SGH-I927 using xda app-developers app
jzamoras said:
Is bluetooth handsfree fixed in this build?
Click to expand...
Click to collapse
In my test both headsets connected fine but one gave no sound and the other gave me only static. Not sure if the mic was working on either one. I don't usually use bluetooth so can't say for sure but I think this is still an issue on this build at this time unfortunately.
lorddavid said:
One question. Do i need to flash the keyboard fix? and the rom is compatiblr with the mod to put external sd as internal? i try to flash but never boot. I will try again in a few moment
Sent from my SGH-I927 using xda app-developers app
Click to expand...
Click to collapse
You won't "need" to but the crashing keyboard gets annoying fast. So installation of a keyboard from the play store (I used the hacker's keyboard) is a must to make this usable. now if there is a "fix" available for the stock keyboard on the JB builds then let me know what it is and I'll see about adding it to the ROM by default.
As for the memory cards, the internal is mounted as /mnt/emmc and the external is mounted as /mnt/sdcard. Not sure if that answers your question...
spyke555 said:
In my test both headsets connected fine but one gave no sound and the other gave me only static. Not sure if the mic was working on either one. I don't usually use bluetooth so can't say for sure but I think this is still an issue on this build at this time unfortunately.
Click to expand...
Click to collapse
Is the same I got using AOKP. I guess I'll wait then.
spyke555 said:
You won't "need" to but the crashing keyboard gets annoying fast. So installation of a keyboard from the play store (I used the hacker's keyboard) is a must to make this usable. now if there is a "fix" available for the stock keyboard on the JB builds then let me know what it is and I'll see about adding it to the ROM by default.
As for the memory cards, the internal is mounted as /mnt/emmc and the external is mounted as /mnt/sdcard. Not sure if that answers your question...
Click to expand...
Click to collapse
I was talking about these patches http://forum.xda-developers.com/showthread.php?t=2067954
there is a patch for swap the external sd with the internal, and another for the keys in the keyboard.
Edit: i think that the keyboard patch no needed. But the Patch to swap the the external SD as internal, doesnt work. The rom never boot when i install it.
Another thing, its me, or the wifi is very very slow? i am downloading skype from the market and is taking so much.
Sorry if i wrote something bad :/
Just corrected the link to the LiteKernel, you may want to download this new link and re-apply to make sure you have the latest kernel installed. Trying to get this built into the ROM to avoid any further confusion...
Ok, i will try it again, but the skype/magicjack audio issue still exist
Just posted a new ROM build that now has the LiteKernel-20130222 built in. No need to flash separately. CM code is the same so no change there. If you already downloaded the 20130331 version and installed to 20130222 kernel then no need to re-download.
CM10.1-M3 release should be coming out shortly so do expect another update soon...
spyke555 said:
Just posted a new ROM build that now has the LiteKernel-20130222 built in. No need to flash separately. CM code is the same so no change there. If you already downloaded the 20130331 version and installed to 20130222 kernel then no need to re-download.
CM10.1-M3 release should be coming out shortly so do expect another update soon...
Click to expand...
Click to collapse
I'll jump as soon bluetooth thing is fixed
Related
Links and rom updated:
ICS Sources build Image (Not SDK anymore, version 4.0.1_r1)
BIG, HUGE, MASSIVE, THANKS TO PAWITP FROM CM TEAM!!! (specially camera.aries.so, great job!)
FUGU kernel, linux 3.0, integrated voodoo sound and color (big thanks to renaudallard)
Here is the most recent image BETA 2:
Changelog on the second post.
We moved to google code:
http://code.google.com/p/ice-cream-sandwich-sgs/downloads/list
(ATENTION: image comes with a kernel for i9000b, if you have a i9000 international or vibrant, download the correct kernel)
Thanks to ytt3r for the vibrant kernel
Agreat tutorial made by ybinnenweg for installation and common issues (Thanks!):
http://forum.xda-developers.com/showthread.php?p=19563068#post19563068
How to root the rom:
http://forum.xda-developers.com/showpost.php?p=19175375&postcount=628
Github's:
http://github.com/onecosmic
http://github.com/syndtr
http://github.com/koaaN
http://github.com/pawitp
http://github.com/teamhacksung
http://github.com/cyanogenmod
IRC channel:
http://webchat.freenode.net/
##icssgs <- yes, double ## (we switched channel)
What works:
Both cellphones:
Hardware Acceleration
Audio
calls, sms, 3g - no more script needed.
Touch
Wifi
SDCards (internal and external)
Market
Contacts sync
Calendar sync
camera
panorama mode
face unlock
Gps
data usage
Partition schemma is now including datadata back to avoid issues with slow movinand devices
usb support
bluetooth
What does not work:
Camera (video recording)
Phone encryption
I'll be posting updates as soon as i have them.
CREDITS:
Pawitp: ril fixes, hw acc , camera lib hack(big android guy ).
teamhacksung
Cyanogenmod team
Syntr: kernel patches
Galnet : First Release
kooaN: i9000 kernel update
Thearc77 : google apps
WarDrake: mirroring
ytt3r: kernel patching, vibrant and captivate kernels
SGS CM team: ICS patches
Motafoca 3g switch apk
And all the other people that is helping to make this a reality
Cheers
Changelog:
Beta 2:
Adb now works at boot (previously it only worked after the phone full boot was complete)
PIN lock fixed (it should work, i cannot test it since i dont have pinlocked sim)
adb reboot recovery now reboot the phone to the recovery instead of performing a normal reboot
Recovery now allows you to make nandroid backups
Fixed Market download problem
Minor fixes (code cleanup)
Thank you Onecosmic
Enviado desde mi GT-I9000B usando Tapatalk
Subscribed! Thank you for your efforts and for everyone involved.
Sent via my GT-I9000 running CM7 (GB 2.3.7) using XDA premium
super cool onecosmic
*subscribed*
so that I'm not left in the dark about the latest changes via email
great work onecosmic !
keep it up
thanks !
subscribed, thank you for your efforts onecosmic! Wish you all the best
Subscribed. Gr8 work onecosmic.
mix tweaks-http://forum.xda-developers.com/showthread.php?t=1334818
+1, subscribed;
any chance of updating first post with link to github sources?
thanks
Really nice job, thanks a lot for this
Awesome job! No chance of doing a captivate version is there?
support you onecosmic
dunno a lot about kernel works but I can help about the system part.
anyway thank you
Is bluetooth working?
Is it safe to install this image. I just want to see how ICS is.. I may even report any bugs if I find, if that helps. Or should I wait for a stable release. I can't wait to see ICS, that's why
Please be gentle, thank you..
Sent from my GT-I9000 using XDA App
Guys, a couple of clarifications for those who ask by private and here:
This is an ALPHA release, means testing, developers, unstable. Not recommended for people whitout a minimum modding/development/rom playing experience.
I cannot work on other phones for a simple reason, i dont have one to test and the trial and error method is not an option (too many things can went wrong..)
All working features will be added to the first post (if is not there, is not working)
donate link is in the left side below my name (usual location on XDA)
Hope this covers all the questions.
Cheers
The colors problem is fixed? Or still we have the orange pattern?
Looking forward to re-igniting my (now)dormant passion for the good old SGS!
All the best!
I just had a little fun experimenting.
1) can you check the version of the kernel for I9000. Neither touchscreen ril worked when I installed. Swiping didn't work and my sim was never accessed.
2) I would not just try this as it might not work for everyone. I was able to install the system as an update to my cm7 installation. It has a nice update system where it converts contacts and calendar events to the ics standard. After it finished my phone froze and needed a restart. However after booting again, all my apps were still installed and angry birds worked. Looked a bit weird in those colours and swiping wasn't working at that point.
Oh and the colour issue seems to be like an overlay more than anything else. Menus that flicker show correct colours behind them. (If you bring up the power menu, the desktop behind it as it flickers is in the correct colouring). Or maybe the colouring and flickering are linked and it only appears like an overlay. (Fyi, hw acceleration may not help this. I used non hw accelerated roms in the past and there was no flickering on them like there is in this port).
Anyway its pretty exciting to be playing around with ics.
Edit: anyone wanting to test this should do a nandroid backup. I restored mine after testing and its as thought I never had ics installed (aka completely successful). Backup the nandroid on your pc tho. I am sure there will be work done on the sdcard which in theory could get wiped. (And many backups are a great idea)
Sent via my GT-I9000 running CM7 (GB 2.3.7) using XDA premium
Is safe, only do a nandroid of your actual rom/mod.
You must have your actual stock rom (odin one) with your pit, for unistall this rom.
Ps: really sorry for my basic english
richiebm said:
Is it safe to install this image. I just want to see how ICS is.. I may even report any bugs if I find, if that helps. Or should I wait for a stable release. I can't wait to see ICS, that's why
Please be gentle, thank you..
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
drakenabarion said:
I just had a little fun experimenting.
1) can you check the version of the kernel for I9000. Neither touchscreen ril worked when I installed. Swiping didn't work and my sim was never accessed.
2) I would not just try this as it might not work for everyone. I was able to install the system as an update to my cm7 installation. It has a nice update system where it converts contacts and calendar events to the ics standard. After it finished my phone froze and needed a restart. However after booting again, all my apps were still installed and angry birds worked. Looked a bit weird in those colours and swiping wasn't working at that point.
Oh and the colour issue seems to be like an overlay more than anything else. Menus that flicker show correct colours behind them. (If you bring up the power menu, the desktop behind it as it flickers is in the correct colouring). Or maybe the colouring and flickering are linked and it only appears like an overlay. (Fyi, hw acceleration may not help this. I used non hw accelerated roms in the past and there was no flickering on them like there is in this port).
Anyway its pretty exciting to be playing around with ics.
Sent via my GT-I9000 running CM7 (GB 2.3.7) using XDA premium
Click to expand...
Click to collapse
Kernel for i9000 does not have the ril inside, ril is on the last image i've uploaded, you need to download and install the lastest image (first post) and then the i9000 kernel.
Its true that the negative color its a androidGLES problem, but the only working (so far) software GLES is the one that cames with the emulator, so enabling the hardware video chip will fix the color (since it is going to be rendered on real hardware and not in the softGLES)
Cheers
I take no credit for this what so ever!!! All I did with the help of Joelz9614 is port to our CDMA Nexus 4Gs. This is a source build from Koush, he did all of the amazing work to get this rom to work! I spoke with Koush and have his permission to post. Also thank you to Kwiboo and AOSP, I used some of his Libs as well to get CDMA working.
Well here are the goods:
http://www.multiupload.com/SQ0KV2RR2V <-----Rom
http://www.megaupload.com/?d=0LTFO07V <-----Gapps Thanks daproy!
Changelog
120611 Build:
Zipaligned all apks for optimal ram usage
Added Mathkids Custom kernel to the boot.img, no need to flash it now
Added GoogleMusic.apk
Added VoodooControlApp.apk
Added NSTools.apk (but our kernel might not support using it, still need to test)
Changed Build name in About Screen
Fixed missing ADB files
CM Alpha 11: <---- Based off Koush 11
Fixed MMS!!!! It took a week but finally got it. <0000 Thank you to Bigrushdog, Joelz9614, Solarnz, Preludedrew and xXVirusXx (all helped me in accomplishing this)
Added ES File Manger
Added ODB.apk
Added SystemUpdateUI.apk
Added Sprintmenu.apk
Changed out various libs and bin files to improve performance
Changed from MTP to MassStorage (MTP was not working on on Linux, Mass storage is more universal) <0000 Thanks to steven676!
Edits to Ramdisk to get storage to mount
Added new Superuser.apk
Wallet is fully working
A2DP bluetooth audio should be working. <0000 Thank you daproy
GoogleEarth will be working when Location fully works, just seems a little flaky now.
I havent fully tested it yet...but Talk Video should be working as well.
I will be working on getting location to work this week. I want to add the Center Mod Clock and Percent battery mod into the rom. Also will be making a Reboot Menu this week as well....stay tuned!!
This rom does seem snappier compared to the previous one, but that just might be me.
I have also been using Format All zip before flashing. http://forum.xda-developers.com/showthread.php?t=1225630&highlight=wipe+all
Alpha 10:
Fix signal strength.
Fix mounting usb storage on computers.
Alpha 9:
Fixed usb tether.
Fixed live wallpapers.
Fixed data usage stats.
Fixed data limits.
Alpha 8:
Fixed Gapps.
Fixed i9023 HOME button.
Fixed calendar sync.
Links don't work
Also is this Koush v2?
What changes did you make from his D720 Rom?
http://forum.xda-developers.com/showthread.php?t=1354263
you are right...should be good now
very excited to try,
but links arent working.
question, is this based on Koush latest release with all the fixes?
intheb0x said:
very excited to try,
but links arent working.
question, is this based on Koush latest release with all the fixes?
Click to expand...
Click to collapse
They are good to go now...copied over wrong and Based on his build #8
fadentales said:
Links don't work
Also is this Koush v2?
What changes did you make from his D720 Rom?
http://forum.xda-developers.com/showthread.php?t=1354263
Click to expand...
Click to collapse
Its based of Koush's Rom Build #8...I had to use libs from Kwiboo's to get data working.
Could you please post what's not working? I'm on kwiboo v2 and everything is good minus camcorder and USB at least. Are these working?
Sent from my Nexus S 4G using xda premium
backing up kiwiboo v2 with eri fix/franco and going to flash this to see what its all about.
thefsfempire said:
Could you please post what's not working? I'm on kwiboo v2 and everything is good minus camcorder and USB at least. Are these working?
Sent from my Nexus S 4G using xda premium
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1356228
There is a link to Koush's Rom...so far everything seems good. Nav has not been tested yet. Camcorder records, but feel free to test it out and leave some feedback.
playing with it now, its pretty smooth. thanks!
Market isnt working for me. Errors
What errors are you getting?
same here with the market, gettin a server error
Personally,
i think kiwiboo v2 with the eri roaming fix and the latest franco ics kernel is faster.
it also includes all the apps, koush rom did not have maps or other google apps included, i was unable to download them either, kept getting some unknown error on installing..
appreciate the effort here, i dont see the advantages over what i mentioned above along with the 11/23 franco kernel with nstools.
I wiped phone
Installed Full-crespo-ota-eng.koush.zip
then installed
Gapps
turned the phone off and then turned it on again
Everything seems to work
Market Works perfect
Camcorder works
only issue i am having is my Facebook contacts will not sync.
reboot fixed the server errors for me, markets working
Any need to flash the wifi fix or the Roaming indicator? during the flashing?
Where is this kwiboo from i haven't seen it here on the forums yet?
Sent from my SPH-D710 using XDA App
So how do you use live wallpapers?
No GPS here. Keyboard from stock is a little wacky but I was able to install SwiftKey and shut off spelling correct and I am good to go. Seems quicker than the other ICS roms so far. Also initially data was super slow and some things were not connecting but after a quick reboot everything was fine.
Sent from my neXus s 4G
-------------------------Warning!-------------------------------------
This ROM is for SGS4A (int'l) ONLY. Does not work on SGS4 from AT&T as it has a locked bootloader.
Please refer to this thread for a bounty on the bootloader.
-------------------------Please note---------------------------------
This is an experimental build of CyanogenMod 10.2 running Android 4.3.
Meaning there's a couple of known issues with the camera. It is my hope these will be sorted out over time.
If anyone has any interest in helping out, please PM me. Or simply fork the code if you want.
-------------------------Instructions---------------------------------
Install CWM recovery from here.
Download most recent ROM from here.
Download most recent Google Applications for Android 4.3 from here.
Boot into recovery by holding the Volume Up button as the phone is booting.
Back up your current ROM inside CWM recovery.
Flash CyanogenMod ROM to your device using CWM recovery.
Flash Google Applications to your device using CWM recovery.
Do a wipe data/factory reset from within CWM recovery.
Reboot system
---------------------------Known issues-----------------------------
Several camera functions such as HDR don't work.
---------------------------Build from source------------------------
Please consult this guide for setting up CyanogenMod for compile.
Please use
Code:
repo init -u git://github.com/CyanogenMod/android.git -b cm-10.2
when you initialize the CyanogenMod repository so you get the source for CM-10.2.
Download roomservice.xml (see below) and put in ~/android/system/.repo/local_manifests/.
Run 'repo sync' and compile with 'brunch jactiveltexx'. You can get the proprietary files from the ROM.
As always, I take no responsibility in case your phone blows up.
And thanks to the CM team for all their hard work.
Downloads
---------------------------CM-10.2 ROM (Android 4.3) -------------------
---------------------------cm-10.2-20130917-----------------------------------
CyanogenMod 10.2 - 20130917
CyanogenMod 10.2 - 20130917 (mirror - thanks to mrvovven)
---------------------------cm-10.2-20130910-----------------------------------
CyanogenMod 10.2 - 20130910
CyanogenMod 10.2 - 20130910 (mirror - thanks to mrvovven)
---------------------------CM-10.1 ROM (Android 4.2.2) ----------------
CyanogenMod 10.1 - 20130810
----------------------------Google apps -------------------------------
Download the official Google apps. Need to download this in order to have apps like Google Play.
For CM-10.1 choose Android 4.2 apps.
For CM-10.2 choose Android 4.3 apps.
http://goo.im/gapps
------------------------------------- KERNELS ---------------------------------
- SGS4A android 4.2.2 kernel for CM10.1
https://www.dropbox.com/s/oo1hr2n6evp3zu9/sgs4a-cm10-1kernel.zip
----------------------- Changelog--------------------
-------CyanogenMod 10.2 - 20130917----------
- Fixed video preview resolution
- Disabled zsl for slightly more stable camera app.
-------CyanogenMod 10.2 - 20130910----------
- Updated kernel to most recent version of cm-10.2 for SGS4.
- Replaced all sensor drivers with SGS4A kernel sources.
- Replaced several camera blobs in /system/lib/* with SGS4A versions enabling basic camera functionality.
-------CyanogenMod 10.1 - 20130810----------
Initial build.
Good job.
Sent from my Nexus 7 using Tapatalk 4
hello
anyone tried this out ?
feedbacks ?
thanks in advance
pdf5 said:
hello
anyone tried this out ?
feedbacks ?
thanks in advance
Click to expand...
Click to collapse
This is not something you should install unless you want to be compiling and debugging yourself. It's far from usable as day to day rom. I hope I'm clear on that.
Fixed wifi and a number of small issues. Should be a lot more stable. Seems the main remaining issue is, not surprisingly, the camera. If anyone knows how the entire camera driver setup is supposed to work in android, I'd love some help
LeJay said:
Fixed wifi and a number of small issues. Should be a lot more stable. Seems the main remaining issue is, not surprisingly, the camera. If anyone knows how the entire camera driver setup is supposed to work in android, I'd love some help
Click to expand...
Click to collapse
Call it just a hunch. But have you tried the camera drivers from the s3 ? I would say that it's basically the same camera and has been added in s4 active because after 1 year it became very cheap to continue manufacturing and this way compensate for the more expensive case and water proofing.
aurelm said:
Call it just a hunch. But have you tried the camera drivers from the s3 ? I would say that it's basically the same camera and has been added in s4 active because after 1 year it became very cheap to continue manufacturing and this way compensate for the more expensive case and water proofing.
Click to expand...
Click to collapse
Honestly, not exactly sure how the setup is. I assume it's mostly in some proprietary libs separate from the kernel, but it's hard to find good information on it.
Sent from my GT-I9295 using xda premium
Thank you for you work!!
But search another File hoster!! DropBox close your account if the trafic is to big!!
So S4 Active Original is the intl i9295 ?
EDIT: oh ok the real dev thread
Sent from my GT-I9295 using xda app-developers app
I've a MicroSD in my SGS4A and i can't choose the external_sd in the CM File Explorer.
Is there any solution?
For example creating symlink or mounting in /sdcard
I've never tried anything of that!
It's working really well Wifi works yay, well done! Hopefully you can get the camera working too.
Building from source
Hi,
I'm happy to see such great progress already, and am only diving in to this because I'd like to be able to lend a hand in any way I can.
Is it too soon to be asking questions about how to build for 10.2? I'm having a go at it right now, and if I use Lejay's kernel and device configuration (jactivelte), the kernel fails to compile, something about BUG_ON rcu error, I can come back to that if its relevant. So I tried Epsylon3's suggestion to use tpruvot's kernel and device config. This builds a rom, but black screen, can't see anything or get into adb. If I flash Lejay's kernel over the top of my 10.2 build, it boots. Phone (dialer) keeps force closing in a loop, which is annoying, but asides from that it seems to boot.
Keep up the good work, can't wait to get some 10.2 love.
snadge said:
Hi,
I'm happy to see such great progress already, and am only diving in to this because I'd like to be able to lend a hand in any way I can.
Is it too soon to be asking questions about how to build for 10.2? I'm having a go at it right now, and if I use Lejay's kernel and device configuration (jactivelte), the kernel fails to compile, something about BUG_ON rcu error, I can come back to that if its relevant. So I tried Epsylon3's suggestion to use tpruvot's kernel and device config. This builds a rom, but black screen, can't see anything or get into adb. If I flash Lejay's kernel over the top of my 10.2 build, it boots. Phone (dialer) keeps force closing in a loop, which is annoying, but asides from that it seems to boot.
Keep up the good work, can't wait to get some 10.2 love.
Click to expand...
Click to collapse
Comparing the 9295 and 9505 kernels, there's quite a lot of differences. Cyanogenmod tried to merge the two, but apparently gave up. The question is really if we should start with the 9505 and add the camera or start with the 9295 and make it compatible for CM. The stuff i uploaded here is a port of the 9505 kernel, but now I'm looking into starting out with the 9295 kernel instead.
The problem with 10.2 is of course there's no released 9295 kernel for android 4.3. I'm guessing there are not that many differences, so it might not be too hard.
I think I'm getting the same compile error you were with 10.2. Not sure what it means.
Are you going to try to make CM 10.2?
LeJay said:
Comparing the 9295 and 9505 kernels, there's quite a lot of differences. Cyanogenmod tried to merge the two, but apparently gave up. The question is really if we should start with the 9505 and add the camera or start with the 9295 and make it compatible for CM. The stuff i uploaded here is a port of the 9505 kernel, but now I'm looking into starting out with the 9295 kernel instead.
The problem with 10.2 is of course there's no released 9295 kernel for android 4.3. I'm guessing there are not that many differences, so it might not be too hard.
I think I'm getting the same compile error you were with 10.2. Not sure what it means.
Click to expand...
Click to collapse
I had a chat with noobnl about it, and he pointed out a patch on gerrit: http://review.cyanogenmod.org/#/c/44552/
I spent hours manually merging it with cm jf kernel, to finally end up with a kernel that gives me. You guessed it, a black screen. After investing about a days worth of effort into it, I ended up with a buggy unstable CM10.2 build, that will boot if I flash LeJay's kernel zip, but its unuseable. It's going to take some serious effort to come up with a functioning CM10.2 kernel for the International S4 Active. In the meantime, a CM10.1 build with a non functioning camera, is still way better than the stock TouchWiz rom, so I'm happy. :laugh:
Ok, I got bored and had another play around with 10.2 and the CM jf kernel. With the black screen problem, if you power the device down, then boot into recovery (power + vol up), you can adb pull /proc/last_kmsg and it tells an interesting story. It looks like the init scripts are totally borked. init.qcom.rc and init.carrier.rc are completely missing. I tried simply copying them into the root, but it looks like its a bit more complicated than that. The problem is clear that it is unable to mount /system for whatever reason, because it can't find /system/bin/sysinit, then pretty much gives up after that.
This looks like a pretty simple problem for a relatively experienced device maintainer, or rom kernel dev to be able to fix. It would be nice if we could get some more developer attention for this device.
snadge said:
Ok, I got bored and had another play around with 10.2 and the CM jf kernel. With the black screen problem, if you power the device down, then boot into recovery (power + vol up), you can adb pull /proc/last_kmsg and it tells an interesting story. It looks like the init scripts are totally borked. init.qcom.rc and init.carrier.rc are completely missing. I tried simply copying them into the root, but it looks like its a bit more complicated than that. The problem is clear that it is unable to mount /system for whatever reason, because it can't find /system/bin/sysinit, then pretty much gives up after that.
This looks like a pretty simple problem for a relatively experienced device maintainer, or rom kernel dev to be able to fix. It would be nice if we could get some more developer attention for this device.
Click to expand...
Click to collapse
You probably forgot to add jactivelte to the list at the bottom of device/jf-common/Android.mk. I didn't want to fork their repo just to add one word on a line, so you have to do this manually. It's probably also a good idea to extract rom files from a cm.10.2 rom for something like jfltexx.
LeJolly said:
Are you going to try to make CM 10.2?
Click to expand...
Click to collapse
I have cm10.2 running. The problem is really the camera.
About OmniROM
The goal of Omni is to experiment with Android development because we enjoy it. Omni isn’t better, just different. It’s another option for the billion Android users out there. Android (vs. iOS and every other mobile OS) has thrived on options as well as the gigantic, talented development community that has emerged to build those options. That’s the beauty of Android – that you can pick and choose from a smorgasbord of devices with varying features and functionality.
Omni is a chance to get involved, no matter who you are. Developers, whether you’ve been developing apps for a week, or ROM features for 3 years, you’re welcome. Users, we know you want to help out, and now you can – Omni actively encourages bug reports and feature requests, which can be added to our publicly accessible roadmap. What’s the point in giving you a ROM, and forcing you to not tell us about any bugs you find?
We also recognise how people use Custom ROMs – we’re all custom ROM users and developers ourselves – the argument that “nightlies are not for end users” is over-used, and no longer valid. We’ve found that the vast majority of users want to get nightly updates to their ROM. For that reason, nightlies aren’t a playground – nightlies are for new features that are finished. You should be able to expect the same stability and reliability from a nightly as you would from a “release” ROM, and can report any bugs that prevent this from happening.
We know not everyone wants to update their ROM daily, and you are free to update as frequently or infrequently as you like. Omni is about flexibility and giving users what they expect – and we are excited to see where the community goes with it.
Click to expand...
Click to collapse
Info from omnirom http://omnirom.org/general/android-l-omnirom-progressing/
Disclaimer
Standard disclaimer applies, your warranty is void, this may eat your dog or burn your house down, delete all your pictures, etc.
This is an early stage release so many things are broken since many patches and fixes haven't been imported from old branches yet.
How to install:
Reboot to recovey
A backup is Recommended, you're gonna loose all your data
Wipe data
Flash rom
Flash SuperSU 2.19 2.40 or up just after the rom
http://download.chainfire.eu/supersu -> This is IMPORTANT
Flash Netflix fix if you need it -> Download
Reboot
Around 5 minutes are required for the first boot
Reboot again to recovery
Flash Gapps (See below)
How to update from a previous version:
Reboot to recovey
Flash rom
Flash SuperSU 2.40 or up just after the rom http://download.chainfire.eu/supersu -> This is IMPORTANT (not needed anymore)
Flash Netflix fix if you need it -> Download
Reboot
Gapps download:
Check http://forum.xda-developers.com/android/software/gapps-consolidated-gapps-thread-t3064693
How to report a bug
Use the search function, if the bug has already been reported and I or another person has answered do NOT report it again. I'm tired of writing ten times the same thing.
A bug report function is embedded in XDA forum look at the top there's a section called "Bug Reports". Use it
Provide a logcat and/or dmesg. Search on XDA if you don't know how to get a proper log
Always provide which model you are using and other information that you think could be useful to solve the bug
Downloads:
This is an early preview with lots of bugs and not usable as a daily driver. You have been warned. Flash this only if you are sure about what are you doing.
Download folder: https://www.androidfilehost.com/?w=files&flid=21696
Starting from 20150506 I'm uploading automated builds: this means that they should be treated as nigthlies (I won't create a new one every 24 hours though). All the new files will be placed in the "Download folder" automatically, so, if no new changes from my part, I will NOT update the changelog. These builds will include all the updates and commits from official Omnirom repos plus my commits not yet merged for our tablets. Good luck
Commits: -> Updated to 5.1.1_r2
Necessary commits
In frameworks_native: https://gerrit.omnirom.org/#/c/13068/ and https://gerrit.omnirom.org/#/c/13069/
In frameworks_av: https://gerrit.omnirom.org/#/c/12528/, https://gerrit.omnirom.org/#/c/12529/ and https://gerrit.omnirom.org/#/c/12530/ (in this order)
In kernel_samsung_smdk4412: https://gerrit.omnirom.org/#/c/12223/ (SELINUX to permissive) , https://gerrit.omnirom.org/#/c/13055/ (Kernel compression)
Optional commits:
Enable Stylus pointer toggle: https://gerrit.omnirom.org/#/c/13606/, https://gerrit.omnirom.org/#/c/13650/, https://gerrit.omnirom.org/#/c/13651/
And finally, if you want to test and/or help:
Netflix experimental codecs fix: https://gerrit.omnirom.org/#/c/13716/
Other commits not made by me:
Nothing here as of now
If you wish to have a kernel with overclock and other features, you can find the kernel sources for my custom kernel "mm_alpha" at https://github.com/marco9333/android_kernel_samsung_smdk4412 . See branch mm_alpha_lollipop for the working and updated version working with this rom (and other lollipop roms). I can share a compiled version, PM me if interested
Screenshots -> Click here
Donations:
Many thanks to Heide Ruehle and @Rand_
Thanks to:
Omnirom core devs
@iofthestorm(ported omnirom 4.4 and made it official for our devices)
@humberos (various patches and asked for an official new android-5.0 branch)
@lirokoa (for his advices on wifi and camera hal)
I forgot someone ???
XDA:DevDB Information
OmniROM, ROM for the Samsung Galaxy Note 10.1
Contributors
marco9333
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.0.x
Based On: AOSP
Version Information
Status: Testing
Created 2014-11-23
Last Updated 2016-11-13
Status of things:
Broken:
Charging off mode isn't working
Using torch tile causes a forced reboot, use torch app instead
Wi-fi tethering isn't working
Screen recording causes an hard reboot (Now it just does nothing or System UI crashes and restart)
I haven't tested other things yet....
Report if you found something new to add here
Notes:
Using a proxy in APN settings doesn't work. Thanks to @farinjini for pointing this out -> I don't know if this is working now or not
Changelog:
Older versions changelog
20141123
Initial release
20141125
Fixed stylus (S-PEN input)
Fixed graphical glitches in screenshots and while rotating screen Thanks to @lirokoa
Upstream changes -> updated to android release LRX21V and other "under the hood" changes
20141126 for N801x
Solved bootloop problem, I hope (not booting kernel)
20141130 for N8000
Partially working RIL (this has been really hard )
20141204-05
Upstream changes -> updated to android 5.0.1 LRX22C
Gps fixed. Thanks to @humberos
Added Performance control and Advanced in settings as in omnirom 4.4.4 (thanks to omnirom core devs)
Mobile partially fixed (need to run a script to make it completely work) (only N8000)
20141207 for N8000
Mobile data completely fixed
20141218
Upstream changes
Added advanced reboot (normal reboot, reboot to recovery and reboot to bootloader)
Fixed the problem with keyboard (need to disable physical keyboard from settings)
Fixed forced reboots caused by Youtube and G+
Minor fixes about technical things
20150108
Switched to android 5.0.2_r1 LRX22G
Upstream changes
Random reboots should be fixed -> see https://gerrit.omnirom.org/#/c/11024/ and https://gerrit.omnirom.org/#/c/10997/
20150206
Upstream changes -> See https://gerrit.omnirom.org/
Lots of code cleaning -> Better stability (I hope)
20150326/27
Switched to android 5.1 LMY47D
Upstream changes
20150401
Upstream changes
Switched to android 5.1_r3 LMY47I
Youtube, G+, firefox, etc. reboot fixed (experimental fix please report if problems)
20150407
Upstream changes
Netflix fix (experimental.. please report)
Properly "keyboard not showing" fix
20150506
Upstream changes
Android 5.1.1 LMY47V
New DRM vendor libs (Report if they "work miracles" with netflix)
20150510
Upstream changes
Pointer disabled by default when using S-Pen (Can be re-enabled in Settings see screenshot at #372)
Reintroduced keyboard fix (sorry about that)
20150519
Upstream changes
Android 5.1.1_r2 LMY47X
Netflix codec fix -> See https://gerrit.omnirom.org/#/c/13716/
20150628
Upstream changes
Android 5.1.1_r5 LYZ28E
20150928 or 20150927
Upstream changes
Android LYZ28J
Stagefright fixes
20151104
Upstream changes
Video playing fixed (Sorry guys and girls )
Chrome is now working
You need to enable the showing of keyboard after first boot: go to settings, language and input, current keyboard and enable Hardware(Show input method)
20161110
Untested build
Upstream changes
Android LYZ28N
Reserved
Workarounds and advices
Smoothness: Go to settings, about tablet and press repentantly Build_number until it gives you that you're now a developer, Go back, press on Developer options, scroll down and set Window animation scale, Transition scale and Animator scale to .5x
Toggle stylus (S-pen) arrow pointer:
Go to Settings, Language & input, put a tick or not on "show icon when using stylus" option
marco9333 said:
Status of things:
Working:
Boot
Bluetooth (switching on and scanning)
Rotation
Suspend/Resume (need to keep wifi on though)
Audio
Root (flashing SuperSU from recovery)
Gapps install and start (I've tried CM Gapps but login in is impossible)
Vibration
Hd videoplayback (tested youtube)
I forgot something ???
Partially working:
Screen -> Rotation causes graphics glitches
Video playbackaudio is working, decoders too but black video
Wifi (something wrong with this module, suspending the device with wifi off causes an hot reboot)
Broken:
RIL (phone calls, 3g and so on) for n8000 -> I'll try lirokoa advice -> need to import samsungRIL from android-4.4 tree
Camera (videos) -> Imported opensource camera hal -> taking pictures is fine but video are completely broken
Gps ->I 've waited enough and no position found -> some error regarding this in the logcat
I haven't tested other things yet....
Click to expand...
Click to collapse
Hey marco,
For graphics glitch when rotating you need:
https://github.com/CyanogenMod/andr...mmit/540345f70db4f0cea6ad3f1150d2cb2fac18da25
https://github.com/CyanogenMod/andr...mmit/4e7f61fd6a36345e7994c236d1c128c4c8a6a0ea
https://github.com/CyanogenMod/andr...mmit/db4cec0e189b84e5999ae5b3bef0e7a6c2bb3087
you can probably find those in 4.4 omnirom branch as well.
Then it should be fixed
lirokoa said:
Hey marco,
For graphics glitch when rotating you need:
https://github.com/CyanogenMod/andr...mmit/540345f70db4f0cea6ad3f1150d2cb2fac18da25
https://github.com/CyanogenMod/andr...mmit/4e7f61fd6a36345e7994c236d1c128c4c8a6a0ea
https://github.com/CyanogenMod/andr...mmit/db4cec0e189b84e5999ae5b3bef0e7a6c2bb3087
you can probably find those in 4.4 omnirom branch as well.
Then it should be fixed
Click to expand...
Click to collapse
Thanks I've already merged one of them yesterday (the first), and I need to check the second one. I don't know about the last one because I haven't found any settings in the various configs that enable BOARD_USE_MHEAP_SCREENSHOT. I need to check better though.
marco9333 said:
Thanks I've already merged one of them yesterday (the first), and I need to check the second one. I don't know about the last one because I haven't found any settings in the various configs that enable BOARD_USE_MHEAP_SCREENSHOT. I need to check better though.
Click to expand...
Click to collapse
Yes maybe the one for heap screenshot is not needed.
Sent from my Nexus 4 using XDA Free mobile app
i'll try and see if YT even works
Running N8010 device with N8000 BL
seems imposible to get it to work :silly:
LastStandingDroid said:
i'll try and see if YT even works
Running N8010 device with N8000 BL
seems imposible to get it to work :silly:
Click to expand...
Click to collapse
It's working I've just tested with a 720p video
marco9333 said:
It's working I've just tested with a 720p video
Click to expand...
Click to collapse
i'll see if it'll work for me i've never got it working with any build
LastStandingDroid said:
i'll see if it'll work for me i've never got it working with any build
Click to expand...
Click to collapse
I'm in the same boat as you, stuck with the leaked N8000 bootloader on my N8010, and youtube works great for me on last CM 11 build.
Nice work Marco!!
I've flashed your build (while building mine... ) and I've noticed that the keyboard doesn't show up, I had to go to Settings>Language & input>Current Keyboard and switch on the Hardware flag to make the keyboard appear.
Youtube works fine (audio and video)
I've played a couple of mp4 videos with a default gallery without a problem
Music plays fine with Apollo
It seem very good for such an early build...If only the log in with Google Account worked...:fingers-crossed:
Sooo nice rom only network works on N8000 and it will be my rom
- There is a problem with the default browser as it closes after opening on few seconds
- Graphics errors at multi tasks cards.
TheMorpheus said:
Nice work Marco!!
I've flashed your build (while building mine... ) and I've noticed that the keyboard doesn't show up, I had to go to Settings>Language & input>Current Keyboard and switch on the Hardware flag to make the keyboard appear.
Youtube works fine (audio and video)
I've played a couple of mp4 videos with a default gallery without a problem
Music plays fine with Apollo
It seem very good for such an early build...If only the log in with Google Account worked...:fingers-crossed:
Click to expand...
Click to collapse
I've tried CM gapps but it chrashes on login.... maybe some others google apps will work. I'll try to extract them from my nexus 5 official L rom.
mysarasaid said:
Sooo nice rom only network works on N8000 and it will be my rom
- There is a problem with the default browser as it closes after opening on few seconds
- Graphics errors at multi tasks cards.
Click to expand...
Click to collapse
I usually use chrome. Default browser should be "deprecated" and replaced by chrome. Graphical errors are still there (during switching off screen, rotation, taking screenshots and so on), lirokoa pointed some commits I'll try with them, but they should do the job. RIL is a priority for me too, but it's quite complex and the code changed a lot so I'll need some time to merge that part.
marco9333 said:
I've tried CM gapps but it chrashes on login.... maybe some others google apps will work. I'll try to extract them from my nexus 5 official L rom.
I usually use chrome. Default browser should be "deprecated" and replaced by chrome. Graphical errors are still there (during switching off screen, rotation, taking screenshots and so on), lirokoa pointed some commits I'll try with them, but they should do the job. RIL is a priority for me too, but it's quite complex and the code changed a lot so I'll need some time to merge that part.
Click to expand...
Click to collapse
For RIL, many things are needed and I can't test since I have N8013, but I can point you to some to a repo that might help you:
https://github.com/ArchiDroid/android_frameworks_opt_telephony/commits/cm-12.0
Looks to all SamsungExynos4RIL / Samsung STK commits. That should help.
lirokoa said:
For RIL, many things are needed and I can't test since I have N8013, but I can point you to some to a repo that might help you:
https://github.com/ArchiDroid/android_frameworks_opt_telephony/commits/cm-12.0
Looks to all SamsungExynos4RIL / Samsung STK commits. That should help.
Click to expand...
Click to collapse
I'll give it a try because when I tried to merge RIL from omnirom 4.4 I've got an enormous amount of conflicts. Thanks maybe them will speed up the fix
Sent from my Nexus 5 using XDA Free mobile app
I've tested latest Banks google apps for android L and they are working. This is the link http://fitsnugly.euroskank.com/?rom=banks&device=gapps (added in OP too)
marco9333 said:
I've tested latest Banks google apps for android L and they are working. This is the link http://fitsnugly.euroskank.com/?rom=banks&device=gapps (added in OP too)
Click to expand...
Click to collapse
it did remove my recovery after flashing this rom not sure why i was just unable to reboot to recovery (regular key combination)
used philz recovery rom worked and booted but recovery was gone (also using adb reboot recovery) made my phone go into bootloop
N8010 device with N8000 BL just to mention,
---------- Post added at 10:24 PM ---------- Previous post was at 10:22 PM ----------
lirokoa said:
Yes maybe the one for heap screenshot is not needed.
Sent from my Nexus 4 using XDA Free mobile app
Click to expand...
Click to collapse
@llirokoa do u know what lib is patched to fix the graphic issue? is it the surfaceflinger?
LastStandingDroid said:
it did remove my recovery after flashing this rom not sure why i was just unable to reboot to recovery (regular key combination)
used philz recovery rom worked and booted but recovery was gone (also using adb reboot recovery) made my phone go into bootloop
N8010 device with N8000 BL just to mention,
---------- Post added at 10:24 PM ---------- Previous post was at 10:22 PM ----------
@llirokoa do u know what lib is patched to fix the graphic issue? is it the surfaceflinger?
Click to expand...
Click to collapse
I've written quite big in the third post that you need to flash supersu beta just after the rom or you won't be able to boot into recovery: you've been warned. I'm working on merging the fixes for graphics issues.
By the way I've fixed the stylus input which is working ok now. New version soon....
New version 20141125 out
I've just uploaded a new build. See OP for download links and second post for changelog. Before signaling a bug or something that isn't working, please read the third post, too.
Another bug I've found is in charging off script, please recharge your tablet while on until next release
On my n8013, every time I flash the ROM, then gapps, then superSU, I get a boot loop, never makes it to Omni logo. I tried to redownload all files from the OP, and still no luck. Tried 4 times now
UPDATE 08/03/16
new build out eventually, have been a bit busy last couple days, new build is ready
changelog
Code:
Updated kernel Auditor to my latest custom version
DT2W active in kernel (not enabled y default)
cpu undervoltage works now and can be changed via kernel auditor
call recording enabled
fixed the frozen lockscreen issues (thanks to hennymcc for info on that)
bluetooth audio should work too
HW Video Accell fixed
few other little tweaks
the custom kernel auditor in this build has been modified to allow enabling dt2w and cpu voltage control
download link
http://www.dmpwap.xyz/roms/pac_kminilte_LP-MR1.Unofficial_20160306-110028.zip
----------------------------------------
UPDATE 24/02/16
Ok another new build,
http://www.dmpwap.xyz/roms/pac_kminilte_LP-MR1.Unofficial_20160224-170017.zip
changelog
Code:
fixed flashing zip
few minor tweaks
UPDATE 20/02/16
another fix - ill get this right eventually.
download link:
http://www.dmpwap.xyz/roms/pac_kminilte_LP-MR1.Unofficial_20160220-100535.zip
changelog
Code:
zip should be fixed now too
removed TWRP from the zip will be updating my twrp post with a zip to install that shortly
hopefully fixed call audio this time
Kernel is now built with Hyper-Linaro 5.1 GCC
Rom Now built Using Sabermod toolchain for performance
----------------------------------------------------------------
UPDATE 19/02/16
yet another update folks,
download link :
http://www.dmpwap.xyz/roms/pac_kminilte_LP-MR1.Unofficial_20160219-170840.zip
changelog:
Code:
Fixed Sensors Libraries so they work again - also added partial support for heart rate sensor
Fixed MTP so it works again
F2FS Support Included,
TWRP3 Recovery built in
Audio Finally Fixed Including Headset Switching.
again let me know of any bugs
known issues:
touch screen still has weird issues after sleep haven't managed to narrow it down yet
---------------------------------------------------------------
UPDATE 17/02/15
Ok lets try this again,
new build up,
http://www.dmpwap.xyz/roms/pac_kminilte_LP-MR1.Unofficial.zip
changelog
Code:
Fixed the Phone call sound and mic issues,
enabled F2FS support for /data and /cache partitions, system will auto mount those partitions as either ext4 or F2FS depending on their format - will have a fixed TWRP 3 out tomorrow with F2FS support
any bugs please let me know again folks.
you need to flash SuperSU after this rom to enable root - i have attached supersu zip to this post
-------------------------------------------------------------------------------------------------
UPDATE 14/02/15
new update out today folks
Changelog
Code:
Replaced the old crappy unstable kernel with a new build of my LP TardisKern with 1.7Ghz CPU OC etc.
Replaced a bunch of samsungs proprietary libs in the build to make sure it works with the new kernel
Replaced the Stock Camera app with Snap Camera from cyanogenmod
Removed google apps this time round :)
automatic brightness works but is not perfect yet (still working on it
you will need to grab supersu and install that after the build to get root going
link :
http://www.dmpwap.xyz/roms/pac_kminilte.zip
please advise of any issues again folks.
i have also uploaded my own device and proprietary tress for compiling with this new kernel
-----------------------------------------------------------------
hello folks.
sorry ive been very quiet the last week or so but ive been working hard on some new things (including that nice new lollipop kernel source for the G800F which is still In progress)
need to give a massive thanks to arkansawdave74 for helping with this and the build for the H model, and for helping give me the kick i needed to get back into android development proper.
but i have actually got some useful work to announce now
i am proud to announce the first BETA release of PAC-Rom for the Samsung galaxy S5 Mini LTE(G800F) (yes i have one for the dual sim H model aswell getting posted soon)
download links are below, and i will let others post screenshots etc as i dont currently have the time since im typing this late at night to get any.
PLEASE BE ADVISED THIS ROM IS FOR THE SM-G800F ONLY AND COULD CAUSE A BRICK IF FLASHED TO OTHER DEVICES
http://www.dmpwap.xyz/roms/pac_kminilte.zip
this is now using a fully up to date TardisKern with 1.7ghz oc amoungst other things.
please mention any bugs etc so i can get to work on them.
current issues noted:
selinux support is completely disabled
mtp(usb storage) may or may not work as my pc does not seem to want to play with any usb storage devices currently
working
phone,
messaging(mms/sms)
mobile data including LTE/4G
display and 3d graphics
remote control transmitter
google apps
wifi
GPS
sound
bluetooth
pretty sure everything else works too
any and all donations would be much appreciated to help cover hosting costs
XDA:DevDB Information
PAC-ROM 5 For Galaxy S5 Mini (SM-G800F), ROM for the Samsung Galaxy S5 Mini
Contributors
DJ_Steve, arkansawdave74, PAC-Rom team, Jackeagle & hennymcc for Device Trees
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: PAC-MAN Rom
Version Information
Status: Beta
Current Beta Version: 1.0
Beta Release Date: 2016-01-30
Created 2016-01-31
Last Updated 2016-03-08
Thanks you for this rom ?
Envoyé de mon SM-G800F en utilisant Tapatalk
Issues?
First thanks to you. but can you rewrite the mainpage and write exactly what works and what not? That would be very helpful
raffejos said:
First thanks to you. but can you rewrite the mainpage and write exactly what works and what not? That would be very helpful
Click to expand...
Click to collapse
updated the main post, but most things seem to work
No root access !
I have the settings on Apps and ADB.
But apps dont have root access.
I am going back to CM 13 !!!
another343 said:
I have the settings on Apps and ADB.
But apps dont have root access.
I am going back to CM 13 !!!
Click to expand...
Click to collapse
Have you installed SuperSU from play store.. Root works fine for others
Sent from my SM-G800F using Tapatalk
Got it !
I used the rooting tool : KingRoot.
That fixed it.
But the system setting still doesnt work.
Also I dont like the camera app.
The CM Snap app is better
the setting worked fine here and still does so im thinking thats something on your end, as for camera i cant comment as ive used cm for about 5 mins and that will be all i ever use it for, cm is far too bloated in my personal opinion and actually seems to perform slower than touchwiz for me, and what rom people choose to use is always personal preference in my opinion
another343 said:
I used the rooting tool : KingRoot.
That fixed it.
But the system setting still doesnt work.
Also I dont like the camera app.
The CM Snap app is better
Click to expand...
Click to collapse
Got it !
I used the rooting tool : KingRoot.
That fixed it.
But the system setting still doesnt work.
Also I dont like the camera app.
The CM Snap app is better
Another Problem !
DJ_Steve said:
the setting worked fine here and still does so im thinking thats something on your end, as for camera i cant comment as ive used cm for about 5 mins and that will be all i ever use it for, cm is far too bloated in my personal opinion and actually seems to perform slower than touchwiz for me, and what rom people choose to use is always personal preference in my opinion
Click to expand...
Click to collapse
Google play refuses to install apps with error: 963 and 924.
I tried costum gApps but still nothingBut it works on other ROMs.
Please Fix.
another343 said:
Google play refuses to install apps with error: 963 and 924.
I tried costum gApps but still nothingBut it works on other ROMs.
Please Fix.
Click to expand...
Click to collapse
Strange how your having problems as im using the same exact build and play store works fine here. Have you tried a wipe
Sent from my SM-G800F using Tapatalk
DJ_Steve said:
the setting worked fine here and still does so im thinking thats something on your end, as for camera i cant comment as ive used cm for about 5 mins and that will be all i ever use it for, cm is far too bloated in my personal opinion and actually seems to perform slower than touchwiz for me, and what rom people choose to use is always personal preference in my opinion
Click to expand...
Click to collapse
Root make over Odin , add a file attached to pda or ap and restart the unit . in my work .
Root work fine you need just turn root on in dewelopers
Options in setings like in cm12.1
Bloatware !!!!
Can you remove all the gApps like Fit,Movies Play ....
Please I wanna install gApps like Open Gapps Pico.
And if you are gonna do it, please dont remove the launcher.
Bye m8
another343 said:
Google play refuses to install apps with error: 963 and 924.
I tried costum gApps but still nothingBut it works on other ROMs.
Please Fix.
Click to expand...
Click to collapse
same to me please fix it i very like this super fast ROM !!! thx
liborhabrnal said:
same to me please fix it i very like this super fast ROM !!! thx
Click to expand...
Click to collapse
already planning to fix that - didnt mean to leave the gapps in in the first place just forgot to remove them after testing myself
Please remove the gapps so everyone can choose the gapps fron opengapps oder somewhere else. Althoug Please use another launcher so not the Google now launcher for example trebuchet from cyanogenmod. The features are the best but i cant use it daily because gapps:cyclops:
Your work is awesome and a progress in custom Roms for the nice s5 mini:good::good:
raffejos said:
Please remove the gapps so everyone can choose the gapps fron opengapps oder somewhere else. Althoug Please use another launcher so not the Google now launcher for example trebuchet from cyanogenmod
Click to expand...
Click to collapse
try to be polite, as that comes across as quite nasty in some ways(though i understand english may not be your natural language so quite possibly is not your fault), ill be fixing that issue once i get my build system back up and running which it is not currently
Deleted
link should be back now
and i wont use drive etc after previous big issues with them years ago
(and why would i pay for android file host when i have my own server)