[ROM][UNOFFICIAL][5.1.1][CM 12.1] Cyanogenmod 12.1 port for Huawei Honor 3C (H30-U10) - Honor 3C ROMs, Kernels, Recoveries, & Other Develo

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi,
I want to introduce you new port of Cyanogenmod 12.1 to our device. It's almost bugless and you can use the device up to 2 days* without need to recharge your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Features:
- All CM 12.1 features
- Almost bugless
- Partly based on Bugless V3 (actualy it's V2.2) ROM
- Ultra low battery consumption
- No overheating
- DTS & SRS audio
- Ready to be your daily driver
Screenshots you can find in post #2;
Post #3 is bugtracker;
And post #4 are credits.
Downloads:
CM 12.1
20160221
TWRP 3.0.0-0:
SPFT version
UPDATE package
GAPPS
Android version: 5.1.1_r33
Cyanogenmod version: 12.1
KERNEL SOURCE: Stock (H30-U10) kernel, build number 3.4.67
DO NOT HOTLINK OR REUPLOAD ANY OF MY FILES.
*This is only theoretical stamina, while in real world it was only about 28 hours. The real test was made, while I was going to school, this means a lot of screen time, wifi always on and about 7 hours of listening to music.

Installation:
(0. Do nandroid backup <-- recommended)
1. Download flashable zip (cm-12.1-xxxxxxxx-UNOFFICIAL-h30u10.zip)
2. Format data, cache and Dalvik
3. Flash it using TWRP recovery
<20160218 and earlier only>
--------------------------------- Continue on PC ---------------------------------
0.1 Extract "boot.img" from zip (cm-12.1-xxxxxxxx-UNOFFICIAL-h30u10.zip)
0.2 Open SPFlashTools and load any Scatter file for our device
0.3 Double-click "bootimg" and navigate to the boot image, extracted before
0.4 Make sure you have unchecked everything elese and click "Download"
---------------------------------- Back to phone ---------------------------------
4. Flash ModemFix and KernelSwapper if needed (B306 version of KernelSwapper and TWRP and codelover's files)
5. Flash GApps
(6. Flash whatever you want)
Screenshots:
See attached thumbnails.

Bug tracker:
VPN not working, but with Orbot can be setup proxyfying.
FM Radio starts playing only if you have started music before.
Youtube has resolution limited to 360p, can be fixed by modified youtube (Fix in attachments - edited Youtube.apk, you need to disable automatic updates).
Flashlight bug.
Not implemented GLONASS (no ROM for H30-U10 has it done).
Many bugs /w camera (reda pages 16 and 17), many of them should be fixed in upcoming build.

Changelog:
20160221
- B306 kernel
- B306 firmware (EU/Int modem)
- Fixed update-script
- Updated update-binary
- TWRP 3.0.0-0 included
20160218
- DTS integrated --> Huge audio quality improvement
- Again new dialer (Now without bugs)
- Truecaller
20160213
- Security patch level Feb 2016
- System improvements
- Updated Phone/Dialer app
20160203
- Initial build
After last Ubuntu corruption caused by Windows Update, I decided to move my work to github, but it is still incomplete, because I am still waiting till the Cyanogenmod repo get synced, but in the meanwhile I started this repo:
https://github.com/kernel-killer/android_device_huawei_h30u10

Credits:
Cyanogenmod Team: For their work on CM 12.1
Ajit Guraya: Releasing Bugless V3 Cyanogenmod ROM for MT6582, but he doesn't want to share his code with me! He just built Wiko Rainbow sources, that's all.
kernel.killer: Creating this port.

Thanks,
I'm downloading the rom. As finish the install and watch the changes you made to learn a little more...

What about flash light bug ?
What about youtube bug after update it,
Vpn ?
Heatup ?
Sent from my Honor using Tapatalk

nadeem119 said:
What about flash light bug ?
What about youtube bug after update it,
Vpn ?
Heatup ?
Sent from my Honor using Tapatalk
Click to expand...
Click to collapse
No flashlight bug (at least not for me), no overheating, but VPN problems still persist and youtube canbe fixed by using modified version.

kernel.killer said:
No flashlight bug (at least not for me), no overheating, but VPN problems still persist and youtube canbe fixed by using modified version.
Click to expand...
Click to collapse
Modified version of youtube gives error, there was a network connection, and it cant sign.me in,
Vpn bug is still there,
Then why you say no bugs found, bro, thats not fair,
There must be flashlight bug in, bcoz all cm 12.1 have this bug,
Sent from my Honor using Tapatalk

nadeem119 said:
Modified version of youtube gives error, there was a network connection, and it cant sign.me in,
Vpn bug is still there,
Then why you say no bugs found, bro, thats not fair,
There must be flashlight bug in, bcoz all cm 12.1 have this bug,
Sent from my Honor using Tapatalk
Click to expand...
Click to collapse
I have updated bugs list , because I forgot to do it.
I've found that you've got right with that flashlight bug, I didn't let it go to deep sleep as I see.
Sorry for any inconveniences.

Can't seem to find any deference between bugless v3 and renayed1 beta2 port...
Both ports battery consumption are looking same now...
Plz provide feedbacks after using this rom...if this port is better, then i'll use it too...
Meanwhile i'm gonna stick with renayed's port cse i don't see any extra feature or bug fix in this port.
Sent from my Honor using Tapatalk

Pavel Sajjad Khan said:
Can't seem to find any deference between bugless v3 and renayed1 beta2 port...
Both ports battery consumption are looking same now...
Plz provide feedbacks after using this rom...if this port is better, then i'll use it too...
Meanwhile i'm gonna stick with renayed's port cse i don't see any extra feature or bug fix in this port.
Sent from my Honor using Tapatalk
Click to expand...
Click to collapse
I'm just working on optimizing performance. And you're absolutely rights, I've used the same method to make battery consumption better.

kernel.killer said:
I have updated bugs list , because I forgot to do it.
I've found that you've got right with that flashlight bug, I didn't let it go to deep sleep as I see.
Sorry for any inconveniences.
Click to expand...
Click to collapse
Fm radio bug may be fixed with this one,
https://userscloud.com/7f96br2q5s2l
Raynard rom don't have fm bug,
Finally what is the difference between your rom and raynard rom,
Sent from my Honor using Tapatalk

nadeem119 said:
Fm radio bug may be fixed with this one,
https://userscloud.com/7f96br2q5s2l
Raynard rom don't have fm bug,
Finally what is the difference between your rom and raynard rom,
Sent from my Honor using Tapatalk
Click to expand...
Click to collapse
I've ported this ROM with less system modifications, wich could possibly cause better system stability.
Anyway Thank you for providing me that fix, I'll test it later.

nadeem119 said:
Fm radio bug may be fixed with this one,
https://userscloud.com/7f96br2q5s2l
Raynard rom don't have fm bug,
Finally what is the difference between your rom and raynard rom,
Sent from my Honor using Tapatalk
Click to expand...
Click to collapse
Actually the fix you've suggested doesn't work, FM doesn't even start playing. But FM included in ROM is working, but it requires to start music first (at least for me), so I've included it in the bugs section.

Hmmm, thanks bro, what about cm 13 porting
Sent from my Honor using Tapatalk

nadeem119 said:
Hmmm, thanks bro, what about cm 13 porting
Sent from my Honor using Tapatalk
Click to expand...
Click to collapse
At the moment I'm testing new update of my port of CM 12.1, but I've already downloaded CM 13 and I'll port it soon. I just want to warn you that, the CM 13 has lots of bugs and many of them will never be fixed for MT6582.

Flash failed on two Honor 3C H30U10.
"Error executing updater binary...."

hakneo said:
Flash failed on two Honor 3C H30U10.
"Error executing updater binary...."
Click to expand...
Click to collapse
What version of TWRP are you using? My H30-U10 with TWRP 2.8.6.0 V2 by @codelover works well.
LINK

kernel.killer said:
What version of TWRP are you using? My H30-U10 with TWRP 2.8.6.0 V2 by @codelover works well.
LINK
Click to expand...
Click to collapse
I have TWRP 2.8.6.0 by @codelover. I think it is version 1. Will flash and come back to report. Thanks.

Related

[ROM][LRX22G][5.0.2][NIGHTLY/FXP][FINAL] Official CyanogenMod 12.0

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.0 (Lolipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Device-specific source code:
device
kernel
vendor
Discussion thread -->
What's working:
so far i have tested:
RIL (Calls, SMS, Mobile Datal)
Display
Camera (photos, camcorder & panorama)
Audio and video
Wifi
Bluetooth
OpenGL rendering
Sensors (accelerometer,compass,light,proximity)
Sdcard
auto brightness
notification led
GPS
NFC
Wifi,Bluetooth and USB tethering
Not working/Tested:
offline charging somewhat working.
other everything is either untested or broken.
Note:
It's entirely possible that features not used by me (nor the people I've asked to test) are broken, but overall the device should be usable. You have been warned.
Because of art 1st boot take long time so don't panic and make post saying phone stuck on bootanim,
xperia m dual not support in cm12.0
This is BETA so don't treat this as stable version.
Download:
Nightly Builds: http://download.cyanogenmod.org/?device=nicki&type=nightly
Last nightly build mirror: Link
FXP CM12.0 Builds: http://fxpblog.co/cyanogenmod/cyanogenmod-12/
GAPPS: https://s.basketbuild.com/gapps
Note : CM-12.0 is only for 4.3 baseband. If you are on 4.1/4.2 baseband/firmware then Follow this instruction
Install instructions: (For 1st time only)
boot into fastboot (ignore if you coming any 4.4 rom)
flash boot.img from cm12.0 zip (ignore if you coming from any 4.4 rom)
boot into custom recovery
Wipe data and cache
Flash the CM12.0 and gapps zip
Reboot
Upgrading from earlier version of CyanogenMod 12.0:
Boot into Recovery
Flash CM12.0 zip
Reboot
Reporting bugs:
Before Reporting bugs make sure you
Read "note" section
Using stock kernel
Not installed any mods/tweaks - if you have installed mods like xposed you can't report bug
Not modified system files
Checked the posts below for a solution / fix
Read the last 10 pages of this thread for a post with a similar problem
Backup, reflash with a full wipe (do this if mods like xposed is installed) and check if the bug is still there
provide logcat,kmsg. if you reporting radio problem then provide radio log.
Screenshots:
Credits.
Fxp team and all other developer who is working on sony
Code Aurora Forum
CyanogenMod Team
Cybojenix
And Special Thanks to All Donors
XDA:DevDB Information
CyanogenMod 12.0 for Xperia M, ROM for the Sony Xperia M
Contributors
PecanCM
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Stock 4.3 Firmware
Version Information
Status: Nightly
Created 2014-11-21
Last Updated 2015-05-28
Changelog
BETA 3 23-01-2015
Android 5.0.2 (LRX22G)
Fixed problem with YouTube vidoes
Fixes for other video problems
Fixed baseband version
Fixed no bootanimation on 1st boot
Working mass storage and charging only modes
Enabled FM
Updated widevine(DRM) blobs to lollipop
Updated adreno Blobs to LA.AF.1.1(lollipop)
Updated Kernel and Prima Wlan to LA.AF.1.1_rb1.8
Addressed more selinux denials
General cleanup and fixes
Updated cm source
BETA 2 19-12-2014
Updated to Android 5.0.1 (LRX22C)
Misc fixes
Enabled apps2sd
Disabled lpa
- incompatible with NuPlayer
Using cm recovery now
Updated Adreno blobs
Update kernel and prima wlan to LA.AF.1.1_rb1.7 branch
Updated cm source
BETA 1 28-11-2014
Fixed gsm issue after rebooting phone
Enabled multiColor battery led
Enabled 1080p decoding
Updated kernel and wifi driver to LA.AF.1.1_rb1.6
Updated cm source
ALPHA 1 21-11-2014
Initial release
FAQ
Q: The 'Developer and Performance options' from 'settings' are gone. Where are they?
A: Touch the 'Build number' seven times in 'about phone'. Then they will appear.
Q: I'm coming from 4.1 and now i can't view my internal sd data, Why ?
A: Go to Data/media now move your all internal sd data to folder named 0 Means under /data/media/0 then you can view your internal sd data
What about GApps? We can use 4.4.4 for now?
kosmita1993 said:
What about GApps? We can use 4.4.4 for now?
Click to expand...
Click to collapse
added gapps link in 1st post use that,
First bot is very very long, for me it was about 7-10 minutes. Wifi/Bt isn't working for me, NFC probably works because it can read my smarttags.
Great job!
BTW are you planning aosp build too?
omg this interface is so fancy I'm so exited XD
Time to edit Discussion Thread !
Awesome, will try this as soon as wifi gets fixed
Great work PecanCM
I flashed this rom .... 1st it took very time to boot but it booted.
everything was working good but wifi and bluetooth are not working. Hope it gets fixed by @PecanCM in the next build.
I cannot use it now but will use when wifi and blutooth gets fixed
GSM detection came on the 1st boot so there ws no need to reboot
For now this is all .. Hope it gets BETA in the next build !!!!
Thank You !!!
@PecanCM , can I downgrade the ROM after flashing CM12 (like , 5.0 to 4.4.4 ) ?? or (CM12 to CM11) ??
EliXer9 said:
@PecanCM , can I downgrade the ROM after flashing CM12 (like , 5.0 to 4.4.4 ) ?? or (CM12 to CM11) ??
Click to expand...
Click to collapse
Yes
Sent from my C1904 using Tapatalk
Is WiFi working ? (Because it's included in both the sections. i.e , working as well as not working) ?? And sorry if it's a stupid question
EliXer9 said:
Is WiFi working ? (Because it's included in both the sections. i.e , working as well as not working) ?? And sorry if it's a stupid question
Click to expand...
Click to collapse
No, not yet.
iddu.daragah said:
I flashed this rom .... 1st it took very time to boot but it booted.
everything was working good but wifi and bluetooth are not working. Hope it gets fixed by @PecanCM in the next build.
I cannot use it now but will use when wifi and blutooth gets fixed
GSM detection came on the 1st boot so there ws no need to reboot
For now this is all .. Hope it gets BETA in the next build !!!!
Thank You !!!
Click to expand...
Click to collapse
strange both works fine for me
give me logs and if you are on pc then run following and upload audit.log file.
Code:
adb root
adb shell
cat /data/audit/audit.log > /sdcard/audit.log
GSM, BT and GSM not working on my C2004
expecting for the next release! :good:
iks8 said:
First bot is very very long, for me it was about 7-10 minutes. Wifi/Bt isn't working for me, NFC probably works because it can read my smarttags.
Great job!
BTW are you planning aosp build too?
omg this interface is so fancy I'm so exited XD
Click to expand...
Click to collapse
iddu.daragah said:
I flashed this rom .... 1st it took very time to boot but it booted.
everything was working good but wifi and bluetooth are not working. Hope it gets fixed by @PecanCM in the next build.
I cannot use it now but will use when wifi and blutooth gets fixed
GSM detection came on the 1st boot so there ws no need to reboot
For now this is all .. Hope it gets BETA in the next build !!!!
Thank You !!!
Click to expand...
Click to collapse
flash zip from recovery or boot.img from this zip via fastboot https://www.mediafire.com/?45dz5xd8edh7ydn i forgot to commit a change and later removed by git stash this can be the reason otherwise i'm going to need logs.
and no i'm not planning aosp atleast not for few weeks
jhuy said:
GSM, BT and GSM not working on my C2004
expecting for the next release! :good:
Click to expand...
Click to collapse
read note section in 1st post.
PecanCM said:
flash zip from recovery or boot.img from this zip via fastboot https://www.mediafire.com/?45dz5xd8edh7ydn i forgot to commit a change and later removed git stash this can be the reason otherwise i'm going to need logs.
and no i'm not planning aosp atleast not for few weeks
read note section in 1st post.
Click to expand...
Click to collapse
Yes! Now it is working, your perdictions was correct. Thanks a lot!
Thanks wifi and bluetooth working now
after flashing new_boot image
jhuy said:
GSM, BT and GSM not working on my C2004
expecting for the next release! :good:
Click to expand...
Click to collapse
Try to get root, then type this in terminal emulator.
su setprop persist.radio.multisim.config dsds
Sent from my C2005 using XDA Free mobile app
Someone can mirror it? I am not able to download from mediafire, it just restart the download each time.
Sent from my C1904 using Tapatalk

[ROM][5.1.1][CM12.1][F320][Stable][Jan 26]CyanogenMod 12.1 For F320

CyanogenMod 12.1 For F320S/K
Please NEVER upload this rom to other forum or file share service.
Please contact me before modifying this rom.
Originally Posted by cyanogen
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Click to expand...
Click to collapse
Recommend Recovery : TWRP 2.8.6.X or above
Working on CM12
- Wi-Fi
- NFC
- Cellular Network (Calling, SMS/MMS, Data Connection)
- Camera
- External SD Card with Exfat FileSystem.
Not Working on CM12.1
- Nothing
Screen Shot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Known Bugs
- Ambient Display still not working.
Change Log
- Jan 26
* sync latest cyanogenmod repos
- Jan 1
* merge latest cm official msm8974 sources.
- Nov 23
* merge latest cm official g2-common sources.
* change Audio driver (qcom compressed audio -> low latency)
* still NO_WIFI_HAL options is true.
- Sep 25
* merge latest cm official g2 sources.
- Aug 8
* change selinux from enforcing to permissive
* add some IO Scheduler
* Change default cpu gov to BACON
* Enable Ambient Display
Installing Guide
Precondition :
Stock JB firmware and LP BootStack are required in order to install this ROM.
You may also need new Modem for working radio
1. Flashing LP BootStack
2. Flashing Modem(If Your device is F320K)
3. Flashing CM12.1
4. Flash Gapps
4-1. Flash SuperSU
5. Reboot
Source Code
Github : https://github.com/whdgmawkd
android_device_lge_f320, android_device_lge_g2kr-common,android_kernel_lge_msm8974_kr
Special Thanks to
CyanogenMod (Rom Source)
TheMuppets (CM vendor)
lg-devs (LP BootStack)
Download Link
I'm not fluent in English. Sorry for my poor English.
Modem : https://www.androidfilehost.com/?w=files&flid=46208
Download Your Model's BootStack
ROM : https://www.androidfilehost.com/?w=files&flid=45505
Download "cm-12-20160101-UNOFFICIAL-f320.zip"
Gapps : Use anything support 5.1. I recommend TK GAPPS.
Already your Fan using your first build cm-12-20141126-UNOFFICIAL-f320.zip which I found on Lgviet few days before. And the issue you have pointed are really there because of which cant use this rom as a daily driver. I hope the new release will be more stable. Thanks for your support for Korean varients. Waiting for your new build.
Shivam Bhalla said:
Already your Fan using your first build cm-12-20141126-UNOFFICIAL-f320.zip which I found on Lgviet few days before. And the issue you have pointed are really there because of which cant use this rom as a daily driver. I hope the new release will be more stable. Thanks for your support for Korean varients. Waiting for your new build.
Click to expand...
Click to collapse
New build is more stable. 1126 has many bugs.
Now almost fixed.
parkjh0821 said:
New build is more stable. 1126 has many bugs.
Now almost fixed.
Click to expand...
Click to collapse
Thanks for your work.
Thread closed
Placeholder threads are not allowed
Thread re-opened. Please do not create a thread in the future unless you are ready to post the download link
If you have a question. please visit http://forum.xda-developers.com/lg-g2/help/rom-cm12-g2-kor-varient-t2980990
no reply any question here.
parkjh0821 said:
If you have a question. please visit http://forum.xda-developers.com/lg-g2/help/rom-cm12-g2-kor-varient-t2980990
no reply any question here.
Click to expand...
Click to collapse
Hey, I have been researching the Wifi issue for you F320 users, So because of wifi not working right it is causing the hot reboots when you turn the screen off. So really right now Wifi is your biggest problem and once fixed the rest should fall in place. Can you eddit your Android.mk file like this and build a test rom?
http://review.cyanogenmod.org/#/c/82159/3/service/Android.mk
I dont think anything is wrong in the kernel source. I am believing that something Rom side is the issue. Let me know ow it goes!
Kind Regards
Zachariah
RenderBroken said:
Hey, I have been researching the Wifi issue for you F320 users, So because of wifi not working right it is causing the hot reboots when you turn the screen off. So really right now Wifi is your biggest problem and once fixed the rest should fall in place. Can you eddit your Android.mk file like this and build a test rom?
http://review.cyanogenmod.org/#/c/82159/3/service/Android.mk
I dont think anything is wrong in the kernel source. I am believing that something Rom side is the issue. Let me know ow it goes!
Kind Regards
Zachariah
Click to expand...
Click to collapse
If you mean editting frameworks/opt/net/wifi/service/Android.mk, that is already synced my source...
ROM is tested some testers. But except one tester almost tester's device can use wifi without any problem.
But i will try your advice! Thank you!
When can i download this rom :< that link never work ... plz upload to another host or Torrent
linema56 said:
When can i download this rom :< that link never work ... plz upload to another host or Torrent
Click to expand...
Click to collapse
I'm sorry.
Server admin shutdown server... i dont know why server thun off...
Please wait untill tomorrow. I cant contact server admin.
I'm on a panic.
Now server is available.
Cool
Sent from my LG-F320L using XDA Free mobile app
F320S tester
parkjh0821 said:
If you mean editting frameworks/opt/net/wifi/service/Android.mk, that is already synced my source...
ROM is tested some testers. But except one tester almost tester's device can use wifi without any problem.
But i will try your advice! Thank you!
Click to expand...
Click to collapse
If you need a F320S tester... I'll be happy to test and give detailed feedback (logcat) anytime
Just PM me
Merry X-MAS
r03ter said:
If you need a F320S tester... I'll be happy to test and give detailed feedback (logcat) anytime
Just PM me
Merry X-MAS
Click to expand...
Click to collapse
F320S/K are already tested.
sorry, but i can't get wlan and i have random reboots. (F320K-version)
it's far away from a daily driver.
alfafred said:
sorry, but i can't get wlan and i have random reboots. (F320K-version)
it's far away from a daily driver.
Click to expand...
Click to collapse
Please cool down device and turn on
Sent from my LG-F320 using XDA Free mobile app
F320S Feedback
WIFI is not working (tried cooling the device for one hour and didn't wok)
and random reboots
otherwise, ROM is good
r03ter said:
WIFI is not working (tried cooling the device for one hour and didn't wok)
and random reboots
otherwise, ROM is good
Click to expand...
Click to collapse
Same here . Wifi didnt worked for me.
r03ter said:
WIFI is not working (tried cooling the device for one hour and didn't wok)
and random reboots
otherwise, ROM is good
Click to expand...
Click to collapse
Try format /system before flash rom.
Issues!
parkjh0821 said:
Try format /system before flash rom.
Click to expand...
Click to collapse
As people reported, i got the same problem with Wifi and Reboot
Ofcourse i did Install Wakelock and all guide, but that's not work

[ROM][UNOFFICIAL][4.4.4] CyanogenMod 11 for Mate 7 [MT7-L09 / MT7-L10]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
* All credits go to [ codeworkx, Ry09iu ]
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
installation:
- At first install the Official B127 Update on ur Phone, be sure u have stock-recovery installed before u try to install the UPDATE.APP. (without the B127 update u have bootloops after install CM 11 )
- Firmware B127 >>> DOWNLOAD-THREAD <<<
- After that please flash CWM [ Download-Thread ]
- Booting into the CWM and make a backup.
- Make Fatory reset.
- go into Mounting selection and Format: System, Cache, Data, SDcard-/data/media
- Now the install CM11-ROM.zip
- Install GoogleApps.zip
- Restart the device.
Click to expand...
Click to collapse
KNOWN ISSUES
- Voice is distorted on calls -> HD voice currenlty not supported (amr wideband)
- Video thumbnails are getting garbled
- Bluetooth audio not properly working (maybe)
- FMRadio - not working/implimented
- NFC - not working/implimented
- Signal display bug (maybe) << i dont see it
- Fingerprint sensor - not working/implimented
Click to expand...
Click to collapse
READ BEFORE FLASHING!
These builds are NOT official and will never be!
Do not submit bug on CyanogenMod issue tracker
Click to expand...
Click to collapse
If you're getting error messages while trying to flash the CyanogenMod zip, THEN FOLLOW THE ABOVE INSTRUCTIONS.
If your device doesn't boot into CM, reboot to Recovery, goto "Mounts & Storage" and select "Format cache" followed by "Format /data and /data/media". Then reboot!
XDAevDB Information
Cyanogenmod 11.0 for MT7-L09 / L10 ROM for the Huawei Acend Mate 7
Contributors
Ry09iu, codeworkx
ROM OS Version: 4.4.4 KitKat
ROM Kernel: Linux 3.10.30
Based On: CyanogenMod
Created 2015-02-06
XDA:DevDB Information
[UNOFFICIAL][4.4.4] CyanogenMod 11 for Mate 7 [MT7-L09 / MT7-L10], ROM for the Huawei Ascend Mate 7
Contributors
skydsler, codeworkx , Ry09iu
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.10.x
Based On: Cyanogenmod
Version Information
Status: Testing
Created 2015-02-28
Last Updated 2015-02-27
Omg!! Its coming
Very nice work!! If you fix the voicecalls i will flash it
desmoloch said:
Omg!! Its coming
Very nice work!! If you fix the voicecalls i will flash it
Click to expand...
Click to collapse
??? whats prblm with you are voice calls??!!?!
Simona Simmy said:
??? whats prblm with you are voice calls??!!?!
Click to expand...
Click to collapse
Take a look at "known issues". Voice distorted.
desmoloch said:
Take a look at "known issues". Voice distorted.
Click to expand...
Click to collapse
link ?
faulty phone ?
Simona Simmy said:
link ?
faulty phone ?
Click to expand...
Click to collapse
Sorry but what do you want from me?! Take a look at FIRST POST: distorted voicecall is a KNOWN issue. I have not tested the Rom yet and i wont until this issue is fixed.
desmoloch said:
Sorry but what do you want from me?! Take a look at FIRST POST: distorted voicecall is a KNOWN issue. I have not tested the Rom yet and i wont until this issue is fixed.
Click to expand...
Click to collapse
well am asking if your phon is not faulty man..
Simona Simmy said:
well am asking if your phon is not faulty man..
Click to expand...
Click to collapse
Its a Rom issue...
Back to topic: any timeshedule for getting fingerprint Sensor working? Could i help?
desmoloch said:
Its a Rom issue...
Back to topic: any timeshedule for getting fingerprint Sensor working?
Click to expand...
Click to collapse
no it isn't ..
Simona Simmy said:
no it isn't ..
Click to expand...
Click to collapse
Wtf??! My last comment on this: take a look at "known issues" (skydsler's first post). "Voice is distorted on calls". I have not tested the rom yet and so i dont have the issue. I have no Hardware Problem (cause Rom not flashed!!!) , its a known Rom issue... (In german i would say you are a Dau...)
If fixed, i will try the Rom.
desmoloch said:
Wtf??! My last comment on this: take a look at "known issues" (skydsler's first post). "Voice is distorted on calls". I have not tested the rom yet and so i dont have the issue. I have no Hardware Problem (cause Rom not flashed!!!) , its a known Rom issue... (In german i would say you are a Dau...)
If fixed, i will try the Rom.
Click to expand...
Click to collapse
:good:
This is a joke? Where is the link to download the Rom?
Hi,
i have no problems with the voice calls. Only HD-Voice is not supported. You can make any call without problems... Quality of calls are good.
The fingerprintsensor is a little bit tricky ive tested a lot of configurations with the config, lib and HW Files, but no succsess. Looking forward to fix it. Its a biiig feature that i wont miss at my MT7
kanaaa14 said:
This is a joke? Where is the link to download the Rom?
Click to expand...
Click to collapse
at the top ( in webbrowser ) over the first post ( Download button)
skydsler said:
Hi,
i have no problems with the voice calls. Only HD-Voice is not supported. You can make any call without problems... Quality of calls are good.
The fingerprintsensor is a little bit tricky ive tested a lot of configurations with the config, lib and HW Files, but no succsess. Looking forward to fix it. Its a biiig feature that i wont miss at my MT7
Click to expand...
Click to collapse
HD vocie is controlled by OP.. they STILL cant be arsed put voice via 4G .. STILL crappy 3G where sound is canny like 32 or 64kbps mp3 ..
Thumbs up for CM11, will try this later today and post back. Thanks
Clear instructions all went well, CM11 booted up normaly. 2 things, 1st there is no keyboard installed just google voice, 2nd some chinese applications are installed. Will post back later when. Have some questions, hope someone can help me with ... CPU governer is set to performance on default?, changed it to Interactive. CWM only see's clockworkmod folder not whole internal sd.
Very smooth so far, no FC's or any onwanted behaviour. Looks good, sound on phone dial could be better but i can live with that for now, im using alot of SIP VOIP...
Video of CM11. running https://www.youtube.com/watch?v=5Zqo8zR8tq8. Front camera settings show 1.3MP camera, i think its a bug the quality of the pictures are difently higer.
Huawei music app force closes. Using Es File explorer music app now, really hope we can get the Huawei Music app running. But Finaly i have a loud volume on my headphone
Guys look here new cyanogen mod and it looks WOW .. !
IF they gonna go this direction I WILL defo install it and try it !
I hope it will have futuristic layout and Ui and similar font as Logo name
Details here ; http://www.engadget.com/2015/03/02/cyanogen-qualcomm-partnership-rebrand/
Too many chinease apps, and when you take picture with camera , picture is saved rotated by 180 degres. I did not tested for more bugs, I returned to stock because this rom needs to be clean up from useles apps and chinease apps.
Really like the ringtone hello ya, so here it.
Anyone getting Huawei music app to work?
@skydsler
How did u get mate 7 tree to port cm ?

[ROM][6.0.1][RIO][Unofficial] AOSP-CAF [Stable][11/09/16]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CAF-AOSP for the Huawei GX8
Based on the kernel and device tree of @surdu_petru. Without his work on this device this would not have happened. Thanks to @yuweng and @gopinaidu77 for their help in making the appropriate changes. Also thanks to @earlymon and ncrypt3d for helping me out along the way. Lastly, and certainly not least, thanks to @crpalmer and the rest of the kiwi team. Please let me know if I've left anyone out.
Code:
*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
Working
Everything should be working pretty well. Same bugs as CM13.
Not working
???
See second post for changelog.
Sources
AOSP-CAF
Device
Kernel
Vendor
Download
Download
Gapps
Banks Gapps
SuperSU - Use this aroma variant and make sure it is set to install as systemless.
Get SuperSU Aroma HERE
Installation:
Make sure you have been on official Huawei M build at least in some point in the past. If you can install CM13, you can install this.
Place ROM, Gapps and SuperSU in your SD Card/Internal Memory
Reboot into recovery mode
Wipe cache/dalvikcache/system/data
Flash ROM/SuperSU/Gapps
Reboot
Credits:
- CodeAurora Forums
- CyanogenMod Team
- Men_in_black007
- Vatsal
- TechExhibeo
- h2o64
- Luk1337
- luca02400
XDA:DevDB Information
AOSP-CAF, ROM for the Huawei GX8
Contributors
redbeard1083
ROM OS Version: 6.0.x Marshmallow
ROM Firmware Required: Must be on official Huawei M build before flashing.
Based On: CAF-AOSP
Version Information
Status: Stable
Beta Release Date: 2016-09-13
Created 2016-09-14
Last Updated 2016-11-09
11/9/16 - Sorry for the **** build. New one should be good to go. *edit* [email protected] swear filter.
11/7/16 - Data while sleeping should be fixed. Thanks to @InkSlinger420 for pointing me in the right direction.
10/13/16 - Reverting to the former GPS blobs (see CM13 thread) breaks this rom.
10/08/16 - Some minor changes were pushed to the source. Included here.
9/28/16 - Changed model number to RIO-L03. Insignificant if you have the RIO-L01 variant. Probably the last update until either 1. CAF repo is updated or 2. Changes to fix bugs from the CM13 thread.
9/26/16 - Changed DPI to 440 (default is 480). If you don't like it, use a DPI app in the play store to change it back.
9/24/16 - added latest device changes courtesy of @surdu_petru. should see improved battery life and performance.
9/20/16 - removed NFC code. should see slightly better battery life. updated sources in OP.
9/13/16 - Initial Release
Double Reserved.
Great bro , u did it:highfive:
The CPU is working on full potential 99% of the time.
Im getting 70° on CPU temperature with normal use.
AndroidNewb666 said:
The CPU is working on full potential 99% of the time.
Im getting 70° on CPU temperature with normal use.
Click to expand...
Click to collapse
Did you wipe system, data, and both caches before flashing? I haven't seen this issue on mine.
Can you make Rresurrection Remix rom for huawei g8 ? rio_l01
MehdiT8 said:
Can you make Rresurrection Remix rom for huawei g8 ? rio_l01
Click to expand...
Click to collapse
Yes. Already done and need to make a thread for it. Can find it here: http://forum.xda-developers.com/gx8/how-to/various-roms-gx8-t3448696
Hey bro... I really enjoy this ROM... I have just a couple of questions:
Is there any way to fix the offline charging animation?
Also I get an error using open Gapps stock package, however the micro package works fine. Is there any way to use the stock package?
Thanks
1. Not that i've found yet. the same thing happens on AOSP-based roms on the honor 5x. Not sure what's up with that, but it does seem to charge when powered down.
2. Larger open gapps packages are broken on this rom. Not sure what the problem is. I recommend banks gapps for this rom. Also slim is very similar and works fine with the larger open gapps packages. has latest security updates as well.
redbeard1083 said:
1. Not that i've found yet. the same thing happens on AOSP-based roms on the honor 5x. Not sure what's up with that, but it does seem to charge when powered down.
2. Larger open gapps packages are broken on this rom. Not sure what the problem is. I recommend banks gapps for this rom. Also slim is very similar and works fine with the larger open gapps packages. has latest security updates as well.
Click to expand...
Click to collapse
Thanks...
Just a couple more questions:
I noticed my signal seems to be weaker though I haven't experienced any drops. Is that to be expected? I've noticed it particularly on 4G.
Also, will the latest security patches be included in the next update? I really like how clean this ROM is do I prefer it over other roms like CyanogenMod/Resurrection/Slim
There hasn't been much activity on the repo this ROM is built from. I'm not sure if it'll see anymore updates. I plan to include hardware fixes if/when they happen.
this ROM is awesome!
My RIO-L03 gets really slow with original huawei EMUI 3. I was expecting official EMUI 4 update but finally ran out of patience and decided to hack it. Flashed it with CM13 yesterday. All worked fine except cellular network. Then switched to this ROM and it worked beautifully. Fast and Smooth, no redundant useless packages. Can't be happier with it now. Thank you very much for creating this wonderful ROM!
aresumo said:
My RIO-L03 gets really slow with original huawei EMUI 3. I was expecting official EMUI 4 update but finally ran out of patience and decided to hack it. Flashed it with CM13 yesterday. All worked fine except cellular network. Then switched to this ROM and it worked beautifully. Fast and Smooth, no redundant useless packages. Can't be happier with it now. Thank you very much for creating this wonderful ROM!
Click to expand...
Click to collapse
glad you're enjoying it!
Hey, any updates to the AOSP-CAF repo?
nope.
Hi i have installed this ROM , and works great , battery last for more than a day, the only problem is when using WAZE app its crash and reboot and overheat, thats the only problem anyone know how do i fix it?
Enviado desde mi HUAWEI RIO-L03 mediante Tapatalk
halxs007 said:
Hi i have installed this ROM , and works great , battery last for more than a day, the only problem is when using WAZE app its crash and reboot and overheat, thats the only problem anyone know how do i fix it?
Enviado desde mi HUAWEI RIO-L03 mediante Tapatalk
Click to expand...
Click to collapse
the problem is that the GPS blobs this uses apparently don't like waze (i've been unable to replicate that issue, but i didn't use the app long). the GPS blobs that do work with waze cause two problems: 1. anything that uses GPS on the aosp rom causes an instant reboot. 2. they absolutely destroy battery life on the roms it does work on (see: CM13).
Not very good news
Enviado desde mi HUAWEI RIO-L03 mediante Tapatalk
pretty sure the new build is garbage. working on a fix.
*edit* can confirm. wait for next build. sorry about that.

[ROM][6.0.1][UNOFFICIAL] Lineage OS 13

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
Status : ALPHA 5
This version is mainly for testers but anybody can flash it, since there is no more critical issues :victory:
This build is userdebug flavor. ADB and ROOT are disabled by default.
Installation instructions
First of all, update your Mate to EMUI 4.1 (that has the good kernel version)
Like always: BACKUP, BACKUP BACKUP !
Wipe every partitions (except your SD and your internal storage) See below.
You can flash GApps (see the frequently asked questions below).
Enjoy.
- NXT-AL10, NXT-L29 and NXT-L09 reported as booting
- Xposed reported as working
- Second SIM reported as working (NXT-L29)
Important note : L-09 variant is UNSTABLE for now.
Working
- Since Alpha 1
Partial and temporary GApps implementation
Launchers (Pixel/Google Now)
Themes (include animated)
- Since Alpha 2
RIL
Audio
Microphone
WiFi
Bluetooth
Security (Pin/Password/Pattern..)
GPS over data
Google Apps (include widgets and theme )
HiSuite full compatibility
- Since Alpha 3
SD Card
Tethering (WIFI + BT)
Offline charge
USB Access (MTP/PTP + MIDI input)
OTA Updates (by the built-in CM Updater)
Enhanced boot time (+/- 1min)
- Since Alpha 4
LCD Backlight adjustments
Notification Led
Enhanced boot caching
USB Tethering
Fix sensors
Fix ambiant display
Fix Sleep Of Death (thanks to XePeleato)
Fix FLP (location)
Fix GPS
- Since Alpha 5
RIL Signal
Bluetooth (now considered as stable)
Camera (Both, picture only)
Lineage skin/rebrand
Not Working
Camera (video mode)
Native cast
Fingerprint
Fast Charge
NFC
FM Radio
Known issues:
GPS module(fully working, available in the next release)
Another (ghost) SD Card is recognized and is incompatible with CM -> just ignore it for now. This entry will disappear with the next (OTA) update.
RIL working irregularly on AL-10 (unconfirmed) and L-09 devices
Offline charge not working (fixed, available in the next release)
You prefer to wait for a fully working ROM
You can follow the porting status here : https://github.com/PaulFasola/android_device_huawei_next/projects/1
Downloads
Current release, Alpha 5
Click here
Do a full wipe before installing this update or you could try the (risky) migration tool
Previous release, Alpha 4
Click here
Archives
Click here
Source Code
https://github.com/PaulFasola/android_device_huawei_next
You'll find the kernel and the vendor repos as well (check the readme)
Donators
android09
danywalkert
Azti Iluna
basimzanaty
drairoh
My dear tester Kingzak34
Many thanks to you guys !
Credits
* Nexolight for the useful advises
* Meticulus for the glitchy screen issue!
* Surdu_perdu's work for some ramdisk issues!
* _Ekko (freenode) for his help on the rild issues (symbols, symbols symbols...) and rild proper init
XDA:DevDB Information
[ROM][6.0.1][UNOFFICIAL] Lineage OS 13 Port, ROM for the Huawei Mate 8
Contributors
_skypol0
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Version Information
Status: No Longer Updated
Created 2016-12-05
Last Updated 2017-09-15
Reserved
Changelogs
Alpha 3.1 - OTA only
LCD Backlight (manual update, temporary disable adaptive brightness and sensors are still off-line)
Leds (charge/notification etc..)
Drastically reduce battery consumption
Better boot caching for apps optimization
Bases for enabling the sensors soon
Fix in-game latency for complex animations (like 3D transitions)
Alpha 5.1 - (Full)OTA / download
Link: click here
Fully fix the GPS (satellites acquisition, bad wakelocks...)
Fix offline charge (animation) and adjust the settings for a faster charge (rapid charge still In the to-do list).
Have the latest LineageOS 13 core changes
Downloading now, I will test soon. Thanks for your work
UPDATE: I had to remove assert line in your updater-script, as my ro.build.product was Mate8 not next. After install i am currently stuck on the boot loader "Your device is booting now"
UPDATE 2: It worked!! Seemed like an issue on my end, i had to update to emui 4.1 before I was able to get the ROM to boot. Everything seems great so far. The only issue I faced was with the screen artifacting, and of course the issues you already listed. Great work :good:
FREQUENTLY ASKED QUESTIONS
I come from EMUI 4.1, can I flash this ROM ?
Yes, but you will need to full wipe and follow the instructions in OP
I'm on EMUI 5.X or 4.0, can I flash this ROM ?
You should roll back to EMUI 4.1 then follow OP instructions
My phone is asking for a password on boot
The master key of the old EMUI is not known and that's why we had to wipe userdata (this remove encryption).
So, that means that your Data partition is not wiped, and you have to wipe it !
Flash the Cyanogenmod recovery (built with this ROM, located in the same folder) and do a full factory reset, this work everytime.
Once done, reboot and flash this custom TWRP that handle non-encrypted userdata. You will be able to open the SD Card, flash whatever you want and restore your backup.
NB : If you flash back the stock ROM, this last will re-encrypt /data and everything will work as always.
I've waited for 10 minutes and the Cyanogen boot animation is still here
Something is wrong and prevent CM to complete the boot sequence. This is an issue to report (see below).
This ROM does not contain GApps, what should I take ?
You can find GApps package on OpenGapps
You'll need to take for ARM64 and Android 6.0 and then choose the package you want.
Tested so far : Full, Stock, Nano
I've found an issue
First of all, thanks for helping @_skypol0 !
> Open a ticket here <
Check if there is not a similar issue before posting
Fill the issue (Your device infos (kernel version, last EMUI update version etc.) , What is the problem ?, how can we reproduce it ? etc. Please put as many information as possible)
Share a paste/haste/ghost/...bin of your logcat and dmesg
​
Wont use it but thanks for developing it (i dont like roms based on clean android). Might be a huge step in futrue development on Mate family.
Awesome!!
Man, you've convinced me not to sell my mate 8 anymore, It's great potential. I'm looking forward for the beta version of this!
Was going to sell my mate 8 also. But now will test once basic functions are ok.
khanem said:
Was going to sell my mate 8 also. But now will test once basic functions are ok.
Click to expand...
Click to collapse
RIL an audio should be fixed with the next release later this week
I'm excited for Alpha 2
UnchartedRd said:
Downloading now, I will test soon. Thanks for your work
UPDATE: I had to remove assert line in your updater-script, as my ro.build.product was Mate8 not next. After install i am currently stuck on the boot loader "Your device is booting now"
UPDATE 2: It worked!! Seemed like an issue on my end, i had to update to emui 4.1 before I was able to get the ROM to boot. Everything seems great so far. The only issue I faced was with the screen artifacting, and of course the issues you already listed. Great work :good:
Click to expand...
Click to collapse
Oh, yeah, thanks for pointing it out ! I have built CM-13 with the 4.1's kernel and so this last can't work with lower versions I edit the thread.
(for any other problem, open an issue on Github, I can miss infos here!)
_skypol0 said:
Oh, yeah, thanks for pointing it out ! I have built CM-13 with the 4.1's kernel and so this last can't work with lower versions I edit the thread.
(for any other problem, open an issue on Github, I can miss infos here!)
Click to expand...
Click to collapse
No problem, I'll post on github if I find anything else
You mean B320?
Thanks for your effort friend, I'll definitely be glad to test it once it gets a bit more stable.
Oh my god... it's really happening...
Once SD support works, I'll glady test this on my NXT-L09.
THANKS DUDE! SWEET! Hope stable rom will get here soon! but wouldt be better starting with cm14? just saying!!
albertwesquer said:
THANKS DUDE! SWEET! Hope stable rom will get here soon! but wouldt be better starting with cm14? just saying!!
Click to expand...
Click to collapse
Huawei hasn't released a stable build of nougat yet, its only been beta builds. Once Huawei releases nougat for M8, he can work on it.
And on the other side Cm14 is far from stable
Tapatalké depuis mon MEGA Mate 8 !
well i didnt know we had to have nougat in our mate 8 in order to have cm14, in that case cm13 should be ready since 6.0 have quite some time in our device! SO THERE'S HOPE!
Amazing I cant beileve im really seeing it

Categories

Resources