Htc one m9w model - One (M9) Q&A, Help & Troubleshooting

Hello, I bought from eBay Htc one m9 and today I have got the phone and I found that's is an M9w model.
I can't find any info about this model so I thought maybe some one here knows..
Thanks.

enablee said:
Hello, I bought from eBay Htc one m9 and today I have got the phone and I found that's is an M9w model.
I can't find any info about this model so I thought maybe some one here knows..
Thanks.
Click to expand...
Click to collapse
It's China version. You can see CID is HTCCN_701. Can use wcdma/FDD LTE/TD LTE(Band 39 is not support).
Use 810 Ver 2.0.:silly:

oliver962464 said:
It's China version. You can see CID is HTCCN_701. Can use wcdma/FDD LTE/TD LTE(Band 39 is not support).
Use 810 Ver 2.0.:silly:
Click to expand...
Click to collapse
So, this is a GSM version isn't it?
Is it safe to put a international (401) or unlocked (617) ruu?

shaqman89 said:
So, this is a GSM version isn't it?
Is it safe to put a international (401) or unlocked (617) ruu?
Click to expand...
Click to collapse
Yes. As far as I can tell the m9w is gsm only.
Beamed in by telepathy.

shivadow said:
Yes. As far as I can tell the m9w is gsm only.
Beamed in by telepathy.
Click to expand...
Click to collapse
This somewhat gets me confused.
I bought a used one with s-off condition, and found it was using stock marshmallow sprint firmware (651).
If it's gsm only, then wouldn't it have an issue with sprint firmware,which is for CDMA?
After reading a lot, I was under the impression that you can't switch firmwares between gsm and CDMA.
Sent from my HTC One M9 using Tapatalk

shaqman89 said:
This somewhat gets me confused.
I bought a used one with s-off condition, and found it was using stock marshmallow sprint firmware (651).
If it's gsm only, then wouldn't it have an issue with sprint firmware,which is for CDMA?
After reading a lot, I was under the impression that you can't switch firmwares between gsm and CDMA.
Sent from my HTC One M9 using Tapatalk
Click to expand...
Click to collapse
Yikes - pretty sure you can't, and that trying is a great way to brick your device. I'd guess that the model you have is somehow a CDMA version. Perhaps you could post some device information for us to research to help you determine exactly what you've got?

computerslayer said:
Yikes - pretty sure you can't, and that trying is a great way to brick your device. I'd guess that the model you have is somehow a CDMA version. Perhaps you could post some device information for us to research to help you determine exactly what you've got?
Click to expand...
Click to collapse
Thanks. I also thought that should be the case as well.
Anyway, this is from fastboot.
Code:
(bootloader) kernel: lk
(bootloader) product: htc_himawhl
(bootloader) version: 1.0
(bootloader) imei: 3572xxxx453xxxx
(bootloader) version-main: 3.41.651.21
(bootloader) boot-mode: download
(bootloader) version-baseband: [email protected]
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 0PJA20000
(bootloader) cid: SPCS_001
I'm aware that mid and cid could be changed using fastboot commands, but I never heard about changing the product field if this is really m9w version.
Anyway, I checked the imei with the box, and it matches.
The label on the box says it's m9w.
If i checked based on active bands, it is a cdma phone with only sprint 4g bands available, but going by imei (checked on imeidata.net), I got the bands are supposed to match witth the international model. I don't know how reliable that site is, though.
Code:
GSM 1800, GSM 1900, GSM 900, GSM850 (GSM800), LTE FDD BAND 1, LTE FDD BAND 20, LTE FDD BAND 28, LTE FDD BAND 3, LTE FDD BAND 5, LTE FDD BAND 7, LTE FDD BAND 8, LTE TDD BAND 38, LTE TDD BAND 40, LTE TDD BAND 41, WCDMA FDD Band I, WCDMA FDD Band II, WCDMA FDD Band V, WCDMA FDD Band VIII
Would that data be sufficient to see anything strange?

A little digging turns up that sprint spark is the most likely carrier using td-lte.
Cdma devices dont have a sim while gsm devices do. That's why you can't xflash. M9 gsm sort of does both.
Beamed in by telepathy.

shivadow said:
A little digging turns up that sprint spark is the most likely carrier using td-lte.
Cdma devices dont have a sim while gsm devices do. That's why you can't xflash. M9 gsm sort of does both.
Beamed in by telepathy.
Click to expand...
Click to collapse
Sorry if I'm not following entirely.
So you are saying that it is possible for m9w to be flashed using sprint firmware which would explains my case above?
Sent from my HTC One M9 using Tapatalk

shaqman89 said:
Sorry if I'm not following entirely.
So you are saying that it is possible for m9w to be flashed using sprint firmware which would explains my case above?
Sent from my HTC One M9 using Tapatalk
Click to expand...
Click to collapse
It depends.
If your network is "sprint" then you need to check if the phone has a sim card port. If it does then you have a gsm phone. If not then it's cdma.
Sprint also does gsm phones but the question is "how do you know if the firmware you're downloading is cdma or gsm?". Because you CANNOT cross flash a cdma firmware to a gsm device or vice versa.
So, presuming you DO have a sim card port it's gsm for sure so you can treat it as a generic gsm device BUT sprint are known for making their devices difficult to work with, but that could be cdma devices.. So yes, with gsm you should be able to mess with it to flash stuff but make sure you make a backup the very second you get into TWRP (everything except data) and, if you can, make the files available to flippy for others to recover their devices (your contribution for the help you have had and will get?). I can host the files forever on my gdrive with my m9 backup if needed and flippy will add them to his help thread in the general section.
So, by common locigal deduction, we don't know for sure but now you know how to tell if it is gsm or cdma but still be careful with firmwares as one mistake = a doorstop.
Beamed in by telepathy.

shaqman89 said:
Thanks. I also thought that should be the case as well.
Anyway, this is from fastboot.
I'm aware that mid and cid could be changed using fastboot commands, but I never heard about changing the product field if this is really m9w version.
Anyway, I checked the imei with the box, and it matches.
The label on the box says it's m9w.
If i checked based on active bands, it is a cdma phone with only sprint 4g bands available, but going by imei (checked on imeidata.net), I got the bands are supposed to match witth the international model. I don't know how reliable that site is, though.
Would that data be sufficient to see anything strange?
Click to expand...
Click to collapse
For what it's worth, the SKU you're software is reporting is 651 - that's definitely a CDMA version (Sprint).

shivadow said:
It depends.
If your network is "sprint" then you need to check if the phone has a sim card port. If it does then you have a gsm phone. If not then it's cdma.
Sprint also does gsm phones but the question is "how do you know if the firmware you're downloading is cdma or gsm?". Because you CANNOT cross flash a cdma firmware to a gsm device or vice versa.
So, presuming you DO have a sim card port it's gsm for sure so you can treat it as a generic gsm device BUT sprint are known for making their devices difficult to work with, but that could be cdma devices.. So yes, with gsm you should be able to mess with it to flash stuff but make sure you make a backup the very second you get into TWRP (everything except data) and, if you can, make the files available to flippy for others to recover their devices (your contribution for the help you have had and will get?). I can host the files forever on my gdrive with my m9 backup if needed and flippy will add them to his help thread in the general section.
So, by common locigal deduction, we don't know for sure but now you know how to tell if it is gsm or cdma but still be careful with firmwares as one mistake = a doorstop.
Beamed in by telepathy.
Click to expand...
Click to collapse
Sprint-branded M9s are always CDMA devices. Since LTE exists CDMA phones use sim cards as well. Please be carefull with such posts as the one I quoted. People might think they own a GSM device although they don't.

Flippy498 said:
Sprint-branded M9s are always CDMA devices. Since LTE exists CDMA phones use sim cards as well. Please be carefull with such posts as the one I quoted. People might think they own a GSM device although they don't.
Click to expand...
Click to collapse
Sorry, not 100% true at all. Sprint have sprint spark which is td-lte and uses gsm devices. I did extensive research into it last night.
If the cdma phones use simcards then those devices are gsm. Cdma devices are tuned at the factory for specific networks hence the lack of simcard slot. Simcards support gsm and the m9 with a sim doesn't support cdma but instead wcdma along with all the gsm bands too.
So I'm willing to bet a testicle. You?.
Beamed in by telepathy.

In short, I think this means, sprint is giving me a hard time lol.
So, just to summarize:
- From the box and imei, it seems I have m9w model (GSM)
- According to firmware, and available bands, I have sprint network (CDMA)
- Judging by the availability of a sim card slot (the provider I am using is GSM), it's definitely GSM capable.
So, going for that, it seems that it really is a CDMA model, just with different brandings?
Am I right?
As for the backup, I don't mind sharing it, though I don't see much benefit, since I have tried a sprint RUU, and it works fine.
I also used ViperOne and using only Sprint kernel would make it be able to recieve network signal.
So, I think it's safe to say that the one I am using one of Sprint variant, so I should be careful when cross-flashing.
CMIIW.

@shivadow:
Link #1
SIM cards: Before the advent of 4G LTE, the obvious difference between GSM and CDMA devices were with regards to the SIM card.
[...]
You may have noticed the latest smartphones intended for CDMA networks also coming with SIM card slots, to take advantage of the network’s 4G LTE capabilities. While GSM and CDMA devices cannot be interchanged even now, and will never be cross-compatible, that won’t make a difference as we continue to make a push towards 4G LTE.
Click to expand...
Click to collapse
Link #2
Many Sprint and Verizon phones now have SIM cards, but that isn't because of CDMA. The SIM cards are generally there for Sprint's and Verizon's 4G LTE networks, because the LTE standard also uses SIM cards. The phones may also have SIM slots to support foreign GSM networks as "world phones." But those carriers still use CDMA to authenticate their phones on their own home networks.
[...]
The problem is, they're turning it on in different frequency bands, with different 3G backup systems, and even, in the case of the new Sprint Spark network, using an LTE variant (TD-LTE) that doesn't work with any other U.S. carrier's phones. There are very few phones that support all of the carriers' LTE bands.
Click to expand...
Click to collapse
Link #3 (and Link #4 for comparison)
OEM ID: 0PJA20000
Supported Cellular Networks: CDMA800 (BC0), CDMA1900 (BC1/BC14)
Supported Cellular Data Links: cdmaOne, CDMA2000 1x, CDMA2000 1xEV-DO, CDMA2000 1xEV-DO Rev A
Click to expand...
Click to collapse
The Sprint M9 is not a traditional CDMA phone but that's due to LTE being a GSM technology and therefore requiring a sim card*. Nevertheless it's still CMDA enough for not being compatible with GSM firmware like the dev edition (617) or the wwe version (401). My statement is still valid. If you tell people every phone with a sim slot is a GSM device they may try to flash GSM RUUs on CDMA devices and brick their phone this way.
* Well, and because CDMA carriers probably understood that their phones need to support at least some GSM bands if they don't want to lose all customers who travel to other countries where CDMA most likely isn't supported at all.
Edit @shaqman89: Can you please take a look at the bottom of the backside of your M9? HTC engraved the model id at this place on the European WWE version. I don't know for sure but I guess that this might be the case for the other versions of the M9, as well. If you own a sprint M9 you should find "0PJA200" there. (The engraving lacks two zeros if you compare it with the MID that you get with fastboot getvar.)

Edit @shaqman89: Can you please take a look at the bottom of the backside of your M9? HTC engraved the model id at this place on the European WWE version. I don't know for sure but I guess that this might be the case for the other versions of the M9, as well. If you own a sprint M9 you should find "0PJA200" there. (The engraving lacks two zeros if you compare it with the MID that you get with fastboot getvar.)
Click to expand...
Click to collapse
You are right. It's really faint and small, but there is a model id there.
It is 0PJA200. I guess that's settle it and could be hard confirmation that this is a sprint variant.

Flippy498 said:
@shivadow:
Link #1
Link #2
Link #3 (and Link #4 for comparison)
The Sprint M9 is not a traditional CDMA phone but that's due to LTE being a GSM technology and therefore requiring a sim card*. Nevertheless it's still CMDA enough for not being compatible with GSM firmware like the dev edition (617) or the wwe version (401). My statement is still valid. If you tell people every phone with a sim slot is a GSM device they may try to flash GSM RUUs on CDMA devices and brick their phone this way.
* Well, and because CDMA carriers probably understood that their phones need to support at least some GSM bands if they don't want to lose all customers who travel to other countries where CDMA most likely isn't supported at all.
Edit @shaqman89: Can you please take a look at the bottom of the backside of your M9? HTC engraved the model id at this place on the European WWE version. I don't know for sure but I guess that this might be the case for the other versions of the M9, as well. If you own a sprint M9 you should find "0PJA200" there. (The engraving lacks two zeros if you compare it with the MID that you get with fastboot getvar.)
Click to expand...
Click to collapse
I owe you a testicle but I have no obligation to pay up on the clause that neither of us actually know what the hell is going on.. [emoji12]
But, what does that mean for the m9w?. Have we established that its a sprint phone and the regular firmware is ok or does it have an alter ego like jekyll and hyde?. Is there an easy way to find out if it'll be locked out, like branding etc.. Can you use any sim for any network?. A test on a 3g only network could reveal some truth?. Will the m9 take a 3g sim card?..
Beamed in by telepathy.

shivadow said:
I owe you a testicle but I have no obligation to pay up on the clause that neither of us actually know what the hell is going on.. [emoji12]
But, what does that mean for the m9w?. Have we established that its a sprint phone and the regular firmware is ok or does it have an alter ego like jekyll and hyde?. Is there an easy way to find out if it'll be locked out, like branding etc.. Can you use any sim for any network?. A test on a 3g only network could reveal some truth?. Will the m9 take a 3g sim card?..
Beamed in by telepathy.
Click to expand...
Click to collapse
The sprint phone and any GSM firmware are incompatible due to the different partition layout. The "problem" of this thread lies in the naming of the phone/thread. There are several variants called M9w which all have different MIDs (and slightly different hardware). Just like almost every GSM M9 is called M9u. That's why I prefer identifying them via the MID or their codename. The number part of the MID or the ul/uhl/wl/whl ending of the codename tell you exactly which model is lying in front of you.
Newer CDMA phones (every model that uses LTE) have some GSM frequencies enabled. On the one hand for being able to use LTE and on the other hand since many US customers who traveled to non-CDMA countries prefered GSM carriers in the US, as well, since they could keep their GSM phone whenever they left the US. Many CDMA customers had to buy a GSM phone and a sim card whenever they left the US due to the lack of CDMA on the rest of the world.
As far as I know sprint phones are sim-locked. However, you can contact sprint and request an unlock code so that non-sprint sim cards can be used, as well. Nevertheless, the sprint version doesn't support all GSM frequencies so you might not get any reception if your GSM carrier doesn't use the frequencies that are supported by the phone. That's why it's in almost every case impossible to get LTE with a non-sprint sim card on a sprint M9. (The same apllies to the verizon variant.)

So basically what you're saying is "sell the m9w and buy a wwe"?.
Beamed in by telepathy.

shivadow said:
So basically what you're saying is "sell the m9w and buy a wwe"?.
Beamed in by telepathy.
Click to expand...
Click to collapse
Well, not really. There is no variant that supports every existing frequency. Therefore, the best variant for user 1 isn't necessarily the best variant for user 2, as well.
Scenario a): You live in the US
If you own a sprint sim card the sprint m9 is totally fine. If you own a verizon sim card you should get the verizon variant. If you own a t-mobile US or an AT&T sim card and rely on VoLTE you should get one of their dedicated variants. If you don't care about VoLTE but own a GSM sim card you should get either the unlocked or the dev edition (both are actually the same phone - only the CIDs differ slightly and the dev edition's bootloader is already unlocked).
Scenario b): You live outside the US
If you rely on VoLTE you should get a phone that got branded by your carrier. If you don't care about VoLTE you should get one of the unbranded versions. There is SKU 401 for Europe, SKU 708 and 709 for Asia and SKU 710 for Australia and New Zealand. They're all (the branded and the unbranded versions) the same if you look at the hardware but the firmware is optimized for the dedicated continent/country/carrier.
With S-OFF you can always convert your GSM phone from one version to another. However, the frequencies that are supported by the US GSM variants differ slightly from the ones of the rest of the world.
Tl;dr: You should always choose the variant that suits you best.

Related

HTC M8 Dual SIM is it Possible to Change the Band to make 4G work in Switzerland?

How to know which LTE band?
Hi!
I know that this has been talked before, but I could not find anything that works.
I have bought a HTC M8 dual sim in switzerland. Back in Argentina, I tried to make 4G work, and, of course, it doesn't.
I have read that there is some chance to change the band, by the qualcomm.
so.. how do I know which band(S) does my phone have?
Thanks in advance!
I use "LTE Discovery" App. Available on the Play Store.
xxopiumxx said:
Hi!
I know that this has been talked before, but I could not find anything that works.
I have bought a HTC M8 dual sim in switzerland. Back in Argentina, I tried to make 4G work, and, of course, it doesn't.
I have read that there is some chance to change the band, by the qualcomm.
so.. how do I know which band(S) does my phone have?
Thanks in advance!
Click to expand...
Click to collapse
According to this webpage, it supports LTE bands 3, 7, 8 and 20. And according to list of LTE bands by country on Wiki, Argentina uses LTE band 4. So it makes sense that you don't have LTE.
While radios are typically interchangeable among "regular" GSM M8 versions (s-off required to flash radios); this is not true for the Dual SIM. So while you are correct that band support is software based on the Snapdragon 801, the normal method to change bands is to flash another carrier version's radio. I don't think you have another version's radio to flash. Some folks have modified the the NV values on the CDMA M8 to change band support. But to my knowledge, nobody has gotten this to work on non-CDMA versions of the M8 (the changes just revert themselves after reboot).
I suspect you are out of luck. This is really something you should have researched before buying the phone.
redpoint73 said:
According to this webpage, it supports LTE bands 3, 7, 8 and 20. And according to list of LTE bands by country on Wiki, Argentina uses LTE band 4. So it makes sense that you don't have LTE.
While radios are typically interchangeable among "regular" GSM M8 versions (s-off required to flash radios); this is not true for the Dual SIM. So while you are correct that band support is software based on the Snapdragon 801, the normal method to change bands is to flash another carrier version's radio. I don't think you have another version's radio to flash. Some folks have modified the the NV values on the CDMA M8 to change band support. But to my knowledge, nobody has gotten this to work on non-CDMA versions of the M8 (the changes just revert themselves after reboot).
I suspect you are out of luck. This is really something you should have researched before buying the phone.
Click to expand...
Click to collapse
I kind of did. This is an fantastic mobile, besides the LTE detail; and by buying it in europe I've spent less than half of its price in Arg. pitifully.. I need the dual SIM. So, still a win win.
I will try to modify the NV values with QXDM... maybe i still have some luck left.
thanks =D

Does the German HTC One M8 has a Multi-band support for american networks?

Hi,
Does the German HTC One M8 has a Multi-band support for american networks?
thx
For T-Mo and AT&T, yes.
For Sprint and Verizon, no.
How can I find out which Version do I have? (I have bought it on ebay)
install adb & fastboot
reboot to fastboot
type " fastboot getvar all " in cmd
post the result after removing serialno and imei
Checked the mid. Bad luck Verizon :/ thanks anyway
...deleted
Meaning what, the US network you want to use is Verizon?
If so, than you need a Verizon version phone. No way around that, they don't have a GSM based network, its CDMA.
Also, even for AT&T and T-Mob US, a Euro version M8 won't have all the bands needed for LTE. Although, 3G and voice/SMS should work fine.
good
I have the same problem?
siemre I used htc one m8 since 2014 and recently bought another because he had sold it turns out that changing operator in my country, El Salvador.
which it is the company Digicel and using the band 900 Mhz to 4G.
It is to change the m8 and is supposed to be international version but it turns out it's version of att as I can do to release the bands and use it with any operator.
greeting
This is not remotely the same problem. The OP has the German version, want to use it on a US network, possibly a CDMA one (Verizon - although that part is not clear per my comment above).
I'd return the phone, if you can. There is no guarantee you can get LTE 900 MHz running properly on this device. At a minimum, it would cost you $25 US to s-off by sunshine (unless its already s-off), and then you can flash a different radio baseband firmware. Even then, its not a sure thing that it will work on your LTE network. I've seen plenty of cases where phones properly "converted" to the proper band support, still won't work on the desired LTE band.
So the money for s-off may just be wasted (plus the time and effort). Plus, if the phone is not previously modified, you may be voiding whatever return/refund rights you have (if you have any).

Got International HTC 10 on Ebay, doesn't get LTE on T-Mobile HELP

I bought a new HTC 10 on ebay and it's the unlocked international version. I didn't realize there is a US unlocked and International variants, I assumed carrier unlocked was an international variant. I'm on Tmobile which aparently uses some band that I'm not able to pick up and therefore I've been relegated to hspa for my data. Quite disappointing.
Can I S-Off and change to either Super CID or the TMobile CID and flash the radio and firmware for T-Mobile and get the phone to pick up the LTE so i can get my high speed data?
I can't find anywhere that tells me if the hardware is the same and that the radio is software configurable and therefore can activate the AWS bands with the correct radio/firmware/ruu or something of the like..
Did I totally blow it buying the int'l version of the 10 unlocked, or can I hack it to run properly on Tmobile LTE?
punkboyinsf said:
I bought a new HTC 10 on ebay and it's the unlocked international version. I didn't realize there is a US unlocked and International variants, I assumed carrier unlocked was an international variant. I'm on Tmobile which aparently uses some band that I'm not able to pick up and therefore I've been relegated to hspa for my data. Quite disappointing.
Can I S-Off and change to either Super CID or the TMobile CID and flash the radio and firmware for T-Mobile and get the phone to pick up the LTE so i can get my high speed data?
I can't find anywhere that tells me if the hardware is the same and that the radio is software configurable and therefore can activate the AWS bands with the correct radio/firmware/ruu or something of the like..
Did I totally blow it buying the int'l version of the 10 unlocked, or can I hack it to run properly on Tmobile LTE?
Click to expand...
Click to collapse
Yes you can do that. Get S-Off, change your CID and MID and flash US Unlocked.
xunholyx said:
Yes you can do that. Get S-Off, change your CID and MID and flash US Unlocked.
Click to expand...
Click to collapse
Very good to know. Follow up. Is this easy enough to reverse if I need to use my warranty?
punkboyinsf said:
Very good to know. Follow up. Is this easy enough to reverse if I need to use my warranty?
Click to expand...
Click to collapse
Yes, the same process but in reverse.
Tarima said:
Yes, the same process but in reverse.
Click to expand...
Click to collapse
OK. so I did all that and am now running unlocked us firmware. I think I'm having the LTE reception issues I had read about. flashing the T-Mobile ruu should fix that right?
Ps
Thanks a million for the prompt replies BTW. I've had this phone for a couple minutes and I feel good to finally get things working like they should be.
punkboyinsf said:
OK. so I did all that and am now running unlocked us firmware. I think I'm having the LTE reception issues I had read about. flashing the T-Mobile ruu should fix that right?
Ps
Thanks a million for the prompt replies BTW. I've had this phone for a couple minutes and I feel good to finally get things working like they should be.
Click to expand...
Click to collapse
I can't vouch for the ruu fixing your lte issues. I've seen mixed reporting around for stuff like this. I would try it and see if it works.
punkboyinsf said:
OK. so I did all that and am now running unlocked us firmware. I think I'm having the LTE reception issues I had read about. flashing the T-Mobile ruu should fix that right?
Ps
Thanks a million for the prompt replies BTW. I've had this phone for a couple minutes and I feel good to finally get things working like they should be.
Click to expand...
Click to collapse
Well, T-mobile has been doing upgrades on the network and there has been a lot of space weather causing power outages and hiccups in other electronic devices. My home WiFi has been connecting and dropping left and right! I too have the T-mobile version of the HTC 10 but I did unlock the SIM and did the full conversion to the North American unlocked developer version and it has been absolutely issue free!! You might want to double check to see if the radios in the International version are using band 12,and band 4 for LTE... I lost my LTE after a long run doing the same thing with the original HTC One M7
I feel your pain
punkboyinsf said:
I bought a new HTC 10 on ebay and it's the unlocked international version. I didn't realize there is a US unlocked and International variants, I assumed carrier unlocked was an international variant. I'm on Tmobile which aparently uses some band that I'm not able to pick up and therefore I've been relegated to hspa for my data. Quite disappointing.
Can I S-Off and change to either Super CID or the TMobile CID and flash the radio and firmware for T-Mobile and get the phone to pick up the LTE so i can get my high speed data?
I can't find anywhere that tells me if the hardware is the same and that the radio is software configurable and therefore can activate the AWS bands with the correct radio/firmware/ruu or something of the like..
Did I totally blow it buying the int'l version of the 10 unlocked, or can I hack it to run properly on Tmobile LTE?
Click to expand...
Click to collapse
Unfortunately HTC enabled/disabled certain LTE bands in the modem firmware depending on the region. The unlocked international doesn't play nice with T-mobile AWS. Flashing the RUU doesn't change the NV values in the modem, so you'll still be stuck with HSPA for the most part. I'm in AZ, and I can get band 12 and sometimes the non-AWS band 4, but neither are super fast. The snapdragon 820 does support all the necessary bands, they just need to be unlocked. We have the issue that qualcomm has put protection on the LTE firmware, so the old way of using QXDM/QPST doesn't work like it did on the 810 and earlier chipsets. There's some other threads on here that thing a custom kernel might open up the possibility of using the QXDM to edit NV values to unlock the necessary bands.

m9 help wanted uk

ive bought a brand new htc m9 on ebay - I'm a long term htc user, ive only bought the m9 as my 4 year old m8 battery is not holding its charge.
the htc 9 ive bought is a sprint version, it also says the device belongs to htc in red letters, the hotspot feature has also been removed from this device
would someone be kind enough to tell me if its possible to flash this phone to a uk version? I don't want to send the phone back, I want to unlock it to its full potential and keep it
Sprint = CDMA
Europe = GSM
The firmware that belongs to the two different network technologies is not interchangeable.
Edit: And no, your phone having a sim card slot doesn't make it a GSM device. LTE is a GSM-only technology. That's why even CDMA devices need a sim card slot if they want to support LTE.
buddy the m9 is running currently fine on 4g lte, its even faster then my m8
wont let me post pictures to the phone version and of it connected to 4g lte
in bootloader it says unlocked s-off twrp version 30 2-0
As said before, LTE is a GSM technology. And the CDMA versions of the M9 even support some (not all) G, 2G and 3G GSM frequencies. Nevertheless, a Sprint M9 is still a CMDA device in it's core and flashing a European GSM firmware on a CDMA device will damage it since the partition layout of the firmwares differs (c.f. here or here or here).
Sidenote: Verizon is another CMDA carrier and the dev edition with CID BS_US001 or BS_US002 and SKU 617 is a GSM firmware.
thank you sending the phone back as its useless without the personal hot spot feature. I appreciate your help

LTE?

My phone fully supports LTE,even the sim card i use is 4G compatible,but somehow i'm not able to use it.And yes,i'm in LTE covering area.Any ideas?
Was LTE working for you before?
What I recommend first is to try your sim on another lte capable phone and/or sim with working lte on your phone
RaZaR1998 said:
My phone fully supports LTE
Click to expand...
Click to collapse
How do you know this? There is no M8 version that supports all LTE bands in all regions.Every M8 version supports different LTE bands, based on the region/version (carrier ID).
In particular, if you are using an M8 version intended for another region, it may be difficult of impossible to make it work on LTE on your local carrier's network.
redpoint73 said:
How do you know this? There is no M8 version that supports all LTE bands in all regions.Every M8 version supports different LTE bands, based on the region/version (carrier ID).
In particular, if you are using an M8 version intended for another region, it may be difficult of impossible to make it work on LTE on your local carrier's network.
Click to expand...
Click to collapse
My M8 is T-MOB version.Maybe ,,transforming" to EU can fix that?
RaZaR1998 said:
My M8 is T-MOB version.Maybe ,,transforming" to EU can fix that?
Click to expand...
Click to collapse
What bands or bands does your carrier use for LTE?
Which T-Mobile version? US or Europe?
redpoint73 said:
What bands or bands does your carrier use for LTE?
Which T-Mobile version? US or Europe?
Click to expand...
Click to collapse
LTE B3 (1800 +).Not sure if it is EU or US
What OS number in bootloader? Does it say s-of or s-off in bootloader?
Assuming it is T-Mob US (which would be more common than T-Mob Europe): As I already said, making LTE work on a device that is intended for another region can be difficult, or even impossible. You would need s-off to "convert" it to EU. S-off (if it isn't already) can only be achieved with sunshine, which costs $25. And it may be money wasted, since a lot of times, we've seen when the M8 is converted to another version, LTE will still not connect to the local carrier's network.
redpoint73 said:
What OS number in bootloader? Does it say s-of or s-off in bootloader?
Assuming it is T-Mob US (which would be more common than T-Mob Europe): As I already said, making LTE work on a device that is intended for another region can be difficult, or even impossible. You would need s-off to "convert" it to EU. S-off (if it isn't already) can only be achieved with sunshine, which costs $25. And it may be money wasted, since a lot of times, we've seen when the M8 is converted to another version, LTE will still not connect to the local carrier's network.
Click to expand...
Click to collapse
I'm S-Off(written the same way in bootloader).So at least it's worth a shot.

Categories

Resources