Develop Bugs

B506 Results

I'd installed and tested the build B506 (Unicom) with Android KK 4.4.2 for Huawei Ascend P6-U06 Int. Ver. Everything went smooth and Smartphone worked perfectly. For Google Apps (Contact Sync, Maps, Play Store..) this can be downloaded from the Chinese market (Huawei App Center), just type Google and install the requested apps from the first package that appears. Only the latest CN version of the Vroot is working for Root. IN CASE THAT YOU'LL INSTALL THE "ROOT BROWSER", DO NOT INSTALL THE TOOLS AND REQUESTED FEATURES (BUSYBOX, SQL DRIVER...) THIS WILL MAKE YOU LOOSE THE ROOT ACCESS FOR THE APPS, and the only that I'd found to get it again was to reinstall the firmware, and apply the Root again. Be careful in case of installing apps that needs to install extra features to work through root. BusyBox Free worked with no problem.
The rollback to B132 and B125 failed through the hard reset (using the stock recovery)*.
Only users from South Africa reported problems with Internet Access, Costa Rica networks should no have this problem (I didn't had it with Claro). HSPA+ not available.
Battery life is more stable than B125 and B132.
Secure & tested root apps:
-Android Tweaker 2
-BusyBox
-Go task Manager
-GPS Essentials
-SetCPU
-Faster GPS
-Avast Anti-Theft
-ES File Explorer (Replace Root Browser): For root file exploring and editing New!
-BusyBox Installer By JRummy Apps Inc. (Replace Busybox by Stephen (Stericson) because of better perfomance and do not affect root access) New!
-CPU tuner (Rooted phones): Better performance than Set CPU New!
*Report if is possible to rollback to B125 or B132

As I remember reading, there is a way to revert to JB. It's in a thread about the b506 firmware. I'm on my phone now and can't search for it. Will post the link when I have some PC access.
Speed isn't what kills you.. the sudden stop does! Oh, and stupidity..

I don't have any issues with network access on Vodacom, South Africa. I think it might be network specific then? I've reinstalled the firmware so many times, and I've never had issues with my data.
Just so everyone knows that it's not the whole of South Africa with issues [emoji4]
Sent from my Huawei P6

miz_pimp said:
I don't have any issues with network access on Vodacom, South Africa. I think it might be network specific then? I've reinstalled the firmware so many times, and I've never had issues with my data.
Just so everyone knows that it's not the whole of South Africa with issues [emoji4]
Sent from my Huawei P6
Click to expand...
Click to collapse
I have a problem with my reception. If invoking the handset from Standby the first thing it does is releasing the network connection. After a few seconds it comes back. Had this behavior also with the B132, only B125 was working normally for me. By the way I am located in Germany and using T-Mobile/MobilcomDebitel.

flintzen_123 said:
I have a problem with my reception. If invoking the handset from Standby the first thing it does is releasing the network connection. After a few seconds it comes back. Had this behavior also with the B132, only B125 was working normally for me. By the way I am located in Germany and using T-Mobile/MobilcomDebitel.
Click to expand...
Click to collapse
I see. I haven't noticed that happening with my device, but I'll check if it happens when I'm out, because I have really bad signal at home.
Sent from my Huawei P6

Thot95 said:
....
The rollback to B132 and B125 failed through the hard reset (using the stock recovery)*.
....
*Report if is possible to rollback to B125 or B132
Click to expand...
Click to collapse
SorynZ said:
As I remember reading, there is a way to revert to JB. It's in a thread about the b506 firmware. I'm on my phone now and can't search for it. Will post the link when I have some PC access.
Speed isn't what kills you.. the sudden stop does! Oh, and stupidity..
Click to expand...
Click to collapse
Here's what I was talking about.
http://forum.xda-developers.com/showpost.php?p=51577711&postcount=178
Good luck downgrading.

B506 Network
Hello,
Synce i've update to B506 i can only connected to 3G network and no more to HSDPA !!
Have someone the same problem ? ANd how can i activate my H+
Thank's

lion6808 said:
Hello,
Synce i've update to B506 i can only connected to 3G network and no more to HSDPA !!
Have someone the same problem ? ANd how can i activate my H+
Thank's
Click to expand...
Click to collapse
I'm on 506 and can use 3G and 2G
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Unlocking HSDPA+ and HSDPA
lion6808 said:
Hello,
Synce i've update to B506 i can only connected to 3G network and no more to HSDPA !!
Have someone the same problem ? ANd how can i activate my H+
Thank's
Click to expand...
Click to collapse
Try adding "ro.config.hspap_hsdpa_open=1" (without quotes) on the build.prop file, it worked for me. Need root access. The file is located on "/system". This build use GSM only if there's no 3g or + networks. (only 2G/GSM configuration available on configuration menu).

Ok i did it and it work's!
Thx
Envoyé de mon P6-U06 en utilisant Tapatalk

SorynZ said:
Here's what I was talking about.
http://forum.xda-developers.com/showpost.php?p=51577711&postcount=178
Good luck downgrading.
Click to expand...
Click to collapse
Thanks for link Maybe I will try it later.

miz_pimp said:
I don't have any issues with network access on Vodacom, South Africa. I think it might be network specific then? I've reinstalled the firmware so many times, and I've never had issues with my data.
Just so everyone knows that it's not the whole of South Africa with issues [emoji4]
Sent from my Huawei P6
Click to expand...
Click to collapse
I faced mobile data problem after upgrading to B506 , I am from Middle east!! then I tried to downgrade to B125 but it failed, so I used TWRP to use a root rom and then tried B125 again

amir_loh66 said:
I faced mobile data problem after upgrading to B506 , I am from Middle east!! then I tried to downgrade to B125 but it failed, so I used TWRP to use a root rom and then tried B125 again
Click to expand...
Click to collapse
You have to change apn than it works.
Inviato dal mio P6-U06 utilizzando Tapatalk

Hi!
someone tried B506 with P6 C00 Dual Sim Model ?
this is compatible?
thanks

seyf.jerbi said:
Hi!
someone tried B506 with P6 C00 Dual Sim Model ?
this is compatible?
thanks
Click to expand...
Click to collapse
If you try, you will brick your phone, C00 is CDMA phone and B506 is for WCDMA phones P6-U06. They have different hardware.

miz_pimp said:
I see. I haven't noticed that happening with my device, but I'll check if it happens when I'm out, because I have really bad signal at home.
Sent from my Huawei P6
Click to expand...
Click to collapse
How is yours working, I cannot get it working on Telkom, Vodacom or CellC. I have no apn settings, even after getting the provisioning message.

remejuan said:
How is yours working, I cannot get it working on Telkom, Vodacom or CellC. I have no apn settings, even after getting the provisioning message.
Click to expand...
Click to collapse
My data works perfectly, and I have my apn settings as well.
Maybe you should try editing your build.prop file, to allow hsdpa, as said in one of the posts above.
Sent from my Huawei P6

[ROM][11/23] MIUI V5 Port for G Pro [WEEKLY] (F240 L/S/K, E98x.)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The latest MIUI is 4.11.17
This one is on: 4.11.17. This thread will always be one update behind so always remember to use the OTA updates!
How to Install: (Updated 10/31)
Flash back to the original stock ROM.
Root and install FreeGee for Recovery.
Install CWM recovery from FreeGee.
Download Philz Advanced Recovery
Download MIUI rom.
Download Modem.
Flash Philz Touch Recovery (PTR) and reboot back to Recovery.
Do full ROM wipe in PTR.
Flash MIUI ROM then Modem
Reboot.
Set up phone and update using OTA.
Enjoy.
Latest 4.10.31 Features since the last MIUI update in General thread.
Added NFC support.
Added LG display settings.
Added LG USB settings.
Added quick link to Service Menu.
Added casting support.
Added LG charging LED
General bug fixes.
GPS location fix in US. (Instant)
[Q] Are you a developer? Will you be able to provide support?
No I'm not, and I'll try my best!
Mainly, you'll have to depend on the support from our community much like I will be! And you have to understand that it will be a learning process for both us and we can only depend on one another for any support! So if you run into any problems, feel free to post! And if you have a solution, make sure to try and help another user out! :good:
LTE is working
anonymous007 said:
As of the 4.10.31 and up you can now easily enable LTE and make it stick by going to General Settings > Mobile Networks > Preferred Network > FDD-LTE
Click to expand...
Click to collapse
Download Links:
Weekly MIUI Download 10/31:
https://yadi.sk/d/ywRXsX_CcUQoe
(The reason I am not using the official link is because of the download speeds. It took over night to download it once. And that's not including the ~30 failed downloads. I will still leave a link to the original at the very bottom.) If you would like to add a mirror as well just let me know and I'll add it here!
Philz Touch Recovery:
http://forum.xda-developers.com/showthread.php?t=2552611
Madmack's Modem E980
http://downloads.codefi.re/madmack/GPRO/CM10_1/modem/E980-MODEM-BM9615A-CWM.zip
----------------------------------------------------------------------------------------
Official MIUI page:
http://en.miui.com/download-122.html
Special thanks to:
Literally everyone at this point. So if you exist, thank yourself.

just a question, supports Spanish language? and thanks

javi1609 said:
just a question, supports Spanish language? and thanks
Click to expand...
Click to collapse
It does not currently support Spanish. It only supports Chinese and English at this time. Sorry!

Nice, someone finally mirrored as the Chinese servers are to slow lol, but some corrections though the ROM does has LTE
Go to general settings > additional > service menu > switch the CDMA to USIM phone should force reboot > following this go back to the service menu and change the Network Mode to Global + LTE That's it.
Also there is another version that puts out updates every Friday here Download Link: http://www.miui.com/download-262.html
Original Source: http://bbs.sonyue.com/thread-96332-1-1.html if anyone can also mirror that one I'd appreciate it as I've had no luck getting it to download lol.

anonymous007 said:
Nice, someone finally mirrored as the Chinese servers are to slow lol, but some corrections though the ROM does has LTE
Go to general settings > additional > service menu > switch the CDMA to USIM phone should force reboot > following this go back to the service menu and change the Network Mode to Global + LTE That's it.
Also there is another version that puts out updates every Friday here Download Link: http://www.miui.com/download-262.html
Original Source: http://bbs.sonyue.com/thread-96332-1-1.html if anyone can also mirror that one I'd appreciate it as I've had no luck getting it to download lol.
Click to expand...
Click to collapse
I believe in order to change it to LTE, we would need the Modem to be working. Because the current one tends to freeze MIUI when changing to LTE.
But after some research it looks like you have to flash both the modem and madmacks kernel for it to work. I haven't tested it myself though but I've seen some reports of people doing that back in the General thread. And I'll try and mirror that weekly one and just label this one 'stable' for more options.

Weekly is now up. I've tested it and there should be an update this friday as well via OTA. I'll keep the OP updated a week behind so users can just use the OTA to get to the latest.
This MIUI is pure Daily Driver material. Battery life is great, good performance/features, and GPS location lock is practically stock speed (like ~5 seconds on 3G). They really worked hard on this one :good::good:
Going to test the deep sleep tonight and report back tomorrow.
Update: After flashing the modem, I got a 5% battery drain after 9 hours with Wi-Fi on. So no different from any CM ROM you'll see around here.

Wow, this is one slick getup. The way they've seperated and designed the notication area really pleases me. I'm surprised that design hasn't been ganked by other roms. Mating this with a Cyanogenmod would result in some wicked magic, for sure. CM's awful notication area always maddens me.

This makes me so hype! I'm one of those (seemingly) rare people that really likes miui and have been hoping something with any kind of support would come to the G Pro. Can't wait to flash this tomorrow. Thanks for bringing us this rom.

Question: Do I have to use PTR, or would TWRP work?

RaiderDuck said:
Question: Do I have to use PTR, or would TWRP work?
Click to expand...
Click to collapse
I just checked the official form post and it looks like it's PTR or TWRP.

Tried installing it yesterday and no bueno. It wouldn't recognize the modem, no matter what I did.

RaiderDuck said:
Tried installing it yesterday and no bueno. It wouldn't recognize the modem, no matter what I did.
Click to expand...
Click to collapse
Which model do you have, which modem did you use, and what recovery did you use. Thanks

GreatCaesar said:
Which model do you have, which modem did you use, and what recovery did you use. Thanks
Click to expand...
Click to collapse
I have an E980, I flashed the modem given in the OP, and I used TWRP.

RaiderDuck said:
I have an E980, I flashed the modem given in the OP, and I used TWRP.
Click to expand...
Click to collapse
So you were able to flash the modem and there wasn't any signal? Or did the recovery not recognize it?

GreatCaesar said:
So you were able to flash the modem and there wasn't any signal? Or did the recovery not recognize it?
Click to expand...
Click to collapse
The modem seemed to flash normally, but after I rebooted, it didn't pick up any network. "Mobile networks" was grayed out in Settings. I tried changing the CDMA settings but it FCed every time I did so and the settings remained unchanged.

RaiderDuck said:
The modem seemed to flash normally, but after I rebooted, it didn't pick up any network. "Mobile networks" was grayed out in Settings. I tried changing the CDMA settings but it FCed every time I did so and the settings remained unchanged.
Click to expand...
Click to collapse
Which carrier are you using?
And CDMA settings will FC regardless, it's one of the reasons LTE doesn't work at the moment.
Try going to Settings > Mobile networks > Network carriers and try setting that manually along with the APN.

GreatCaesar said:
Which carrier are you using?
And CDMA settings will FC regardless, it's one of the reasons LTE doesn't work at the moment.
Try going to Settings > Mobile networks > Network carriers and try setting that manually along with the APN.
Click to expand...
Click to collapse
I'm using AT&T. I'm not thrilled with Commotio (which I flashed yesterday after MIUI bombed) , so I'll try to reflash MIUI in a few minutes.

RaiderDuck said:
I'm using AT&T. I'm not thrilled with Commotio (which I flashed yesterday after MIUI bombed) , so I'll try to reflash MIUI in a few minutes.
Click to expand...
Click to collapse
You should try and use PTR just in case. Weird that it happened in the first place.

GreatCaesar said:
You should try and use PTR just in case. Weird that it happened in the first place.
Click to expand...
Click to collapse
Can I flash other ROMs using PTR? And can I flash PTR using TWRP?

RaiderDuck said:
I'm using AT&T. I'm not thrilled with Commotio (which I flashed yesterday after MIUI bombed) , so I'll try to reflash MIUI in a few minutes.
Click to expand...
Click to collapse
I'm back on CM11 but when I was using the MIUI 4.10.27 build I had LTE working, you don't need to flash a modem or anything just install normally in aroma and when you get in to the Service Menu select Mobile Networks then click the option Global+LTE and and hit the back button and the icon should change to 4G. Just ignore the changing the CDMA Subscription to USIM step as it doesn't seem to work or effect the E980 so leave it at NV.

[Rom][12April] Ascend XT - Bare_Naked Rom B150 / B160

The Bare Naked Rom
Updated for B160 Enjoy ! ​
The name pretty well says it all - This is the CleanRom with Everything Removed
You have nothing but the Bare Basic phone - See the screen shots to see whats left in
Flashing instructions.. You Must use the version that match your firmware. (If you need to get to B150 / B160 Click here)
Copy the Bare_Naked.zip and SR2-SuperSU-v2.79-SR2-20170103215521.zip to the phones Ext_sdcard and reboot to TWRP
You must Mount - System / Cust and Data before you start the Install.
Factory Reset
Install the Rom and Install SuperSU - After install wipe cache / dalvik and reboot.
That's about it ..Enjoy!
~B160 - Download~
~B150 - Download~​

Reserved

Can it be dirty flashed on top of Cleanrom or need to wipe/clean everything?

guest_2011 said:
Can it be dirty flashed on top of Cleanrom or need to wipe/clean everything?
Click to expand...
Click to collapse
it will probably flash OK but you'll still have all your garbage from the data folder

clsA said:
it will probably flash OK but you'll still have all your garbage from the data folder
Click to expand...
Click to collapse
Something i can manually delete, right?

guest_2011 said:
Something i can manually delete, right?
Click to expand...
Click to collapse
Sure but the ROM is designed to be as minimal as possible
Sent from my Nexus 6P using Tapatalk

That's what I am looking for. Thank you.

flashed this Bare Naked Rom, like it. thanks.
but where is the cellular data setting located, such as to set apn?

sxu0920 said:
flashed this Bare Naked Rom, like it. thanks.
but where is the cellular data setting located, such as to set apn?
Click to expand...
Click to collapse
settings > mobile network?

guest_2011 said:
settings > mobile network?
Click to expand...
Click to collapse
not there anymore, it is gone

sxu0920 said:
not there anymore, it is gone
Click to expand...
Click to collapse
gone? i don't have an active sim to try in xt. when i go to settings > mobile network everything is greyed out because no sim inside. i can see
Mobile data >
International data
always send and receive mms
mobile data always on
Access point names >
Search for att microcell (don't know what it is)

guest_2011 said:
gone? i don't have an active sim to try in xt. when i go to settings > mobile network everything is greyed out because no sim inside. i can see
Mobile data >
International data
always send and receive mms
mobile data always on
Access point names >
Search for att microcell (don't know what it is)
Click to expand...
Click to collapse
are you running on this Bare_Naked Rom?
after flashing the Bare_Naked Rom, mobile network is gone
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

sxu0920 said:
did you run on this Bare_Naked Rom?
after flashing the Bare_Naked Rom, mobile network is gone
Click to expand...
Click to collapse
yes this barenaked rom.

guest_2011 said:
yes this barenaked rom.
Click to expand...
Click to collapse
screenshots
https://forum.xda-developers.com/picture.php?albumid=14053&pictureid=55315
https://forum.xda-developers.com/picture.php?albumid=14053&pictureid=55316
---------- Post added at 02:02 AM ---------- Previous post was at 01:59 AM ----------
guest_2011 said:
gone? i don't have an active sim to try in xt. when i go to settings > mobile network everything is greyed out because no sim inside. i can see
Mobile data >
International data
always send and receive mms
mobile data always on
Access point names >
Search for att microcell (don't know what it is)
Click to expand...
Click to collapse
there is no att microcell, where can you find it

sxu0920 said:
screenshots
https://forum.xda-developers.com/picture.php?albumid=14053&pictureid=55315
https://forum.xda-developers.com/picture.php?albumid=14053&pictureid=55316
---------- Post added at 02:02 AM ---------- Previous post was at 01:59 AM ----------
there is no att microcell, where can you find it
Click to expand...
Click to collapse
It's under mobile network. Strange. I don't know why you don't have it. Maybe you didn't clean something before rebooting? Reflash?

guest_2011 said:
It's under mobile network. Strange. I don't know why you don't have it. Maybe you didn't clean something before rebooting? Reflash?
Click to expand...
Click to collapse
these are the steps I followed:
TWRP Mount System, Cust and Data
Factory Reset
Install Bare_Naked.zip
Install SuperSU
Wipe cache / dalvik and reboot.
I am a little confused about "Factory Reset", "Factory Reset" = "Wipe -> Swipe to Factory Reset"?

I dirty flashed, did 130 to 150, then same steps except didnt factory reset. Everything works. By dirty i mean didnt reset but lost all my apps anyway.

i have the same thing, mobile network is gone. how to fix this?

guest_2011 said:
I dirty flashed, did 130 to 150, then same steps except didnt factory reset. Everything works. By dirty i mean didnt reset but lost all my apps anyway.
Click to expand...
Click to collapse
I tried, if skip factory reset, flashing the Bare Naked Rom seemed doing nothing at all.
Also, how could it be possible that build number can be updated from 130 to 150 by flashing Bare Naked Rom?

sxu0920 said:
I tried, if skip factory reset, flashing the Bare Naked Rom seemed doing nothing at all.
Also, how could it be possible that build number can be updated from 130 to 150 by flashing Bare Naked Rom?
Click to expand...
Click to collapse
All I removed are apps
If you missing settings it's most likely hidden somewhere in EMUI
Also flashing any B150 ROM will display B150 in the settings about screen. It's part of the Local.prop.
You get problems when your phones firmware is not actually updated to the displayed version. Like no WiFi
Sent from my Nexus 6P using Tapatalk

Huawei E5372 custom firmware

Custom 21.290.23.00.00 firmware and 17.100.19.01.00 web interface for E5372
The firmware is based on the original global firmware version 21.290.23.00.00. It can be installed on any previous firmware (unless you have locked bootloader), or updated from a modified firmware.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Flash using balongflash (Windows, Linux).
Warning!
This firmware can render your device unbootable! Use it only if you are aware of all the risks and consequences. In case of any problems, do not wait for help, you're on your own. Do not install firmware by non-tech-savvy people request, and do not sell routers with this firmware preinstalled.
Changes:
Firmware digital signature verification in the firmware server is disabled
Added support for IPv6 on mobile networks (disabled by default, could be activated "ipv6" script)
ADB installed and Telnet activated (disabled by default, controlled from the OLED menu)
The stock versions of busybox, iptables and ip6tables programs are replaced with full-fledged ones
The "atc" utility is installed to send AT commands from the console
Installed "ttl" script for modifying (fixing) TTL (for IPv4) and HL (for IPv6)
Installed "imei" script to change IMEI
A local transparent proxy server "tpws" and a script "anticensorship" are installed to circumvent censorship to sites from the registry of prohibited sites in Russian Federation (IPv4 only)
Added DNS over TLS resolver stubby (version 1.5.1, compiled with OpenSSL 1.0.2p) and DNS-level adblock (IPv4 only)
Added extended menu on OLED screen https://github.com/ValdikSS/huawei_oled_hijack
AT^DATALOCK code is disabled
Added kernel module TUN/TAP (for OpenVPN and other programs)
Added OpenVPN (version 2.4.6, compiled with OpenSSL 1.0.2p) and scripts for DNS redirection
Added curl (version 7.63.0, compiled with OpenSSL 1.0.2p)
Added EXT4 kernel module and swap support
Added script for installing Entware application repository
Added script "adblock_update", for updating the list of advertising domains
Multilingual web interface with GSM/UMTS/LTE band selection menu
https://github.com/Huawei-LTE-routers-mods/Huawei_E5372_mod_fw
More information about Huawei LTE routers (zeronet network): https://zn.amorgan.xyz/1HegcCNqxTuhPaHmjZwPGZ9LY34vXD6H1V/

Not sure if anyone has any success with this firmware. I've just tried to update my E5372 and it cause my until to get stuck with a Vodafone logo.
I have to re run my old UI updater to get my router back to the "Old" working unit. Was wondering if anyone could pointme in the right direction to updating this unit.
My hard ware details:
Device name:
E5372T
Hardware version:
CL1E5372TSM
Software version:
21.236.03.00.414
Web UI version:
13.100.07.00.838
MAC Address:
5C:F9:6A:B3:2D:BE
WAN IP Address:
192.168.4.229
Current Firmware Version Number
21.236.03.00.414
Current Dashboard Version Number
WEBUI_13.100.07.00.838_E5_V7R1_V3R2

icemanmelb said:
Not sure if anyone has any success with this firmware. I've just tried to update my E5372 and it cause my until to get stuck with a Vodafone logo.
Click to expand...
Click to collapse
Have you tried to reboot it with power button after flashing? I'm not sure if E5273T uses exactly the same hardware, can't guarantee that the firmware is compatible with that model.

I have just reflash the WebUI firmware and got it back to where it was. Thanks for your help. the reboot didn't help I don't think so perhaps not Compatible. Oh well.
Thanks for your help though

icemanmelb said:
I have just reflash the WebUI firmware and got it back to where it was. Thanks for your help. the reboot didn't help I don't think so perhaps not Compatible. Oh well.
Thanks for your help though
Click to expand...
Click to collapse
You need to flash the firmware first, reboot into download mode, flash web interface after that, reboot again.

ValdikSS said:
You need to flash the firmware first, reboot into download mode, flash web interface after that, reboot again.
Click to expand...
Click to collapse
Thanks for that. I'll try it again one the site is back up. Not sure if I found the WebInterface in the file. Perhaps I've missed it.
P

Newbie Here
Hello I'm new on this matters, so if you could it would be great to have a step by step procedure on how should i do, like what commands to use on balong_flash ... I currently have an Huawei WifiModem E5372
I appreciate your help,
Thanks in advance

ValdikSS said:
Added kernel module TUN/TAP (for OpenVPN and other programs)
[*] Added OpenVPN (version 2.4.6, compiled with OpenSSL 1.0.2p) and scripts for DNS redirection
Click to expand...
Click to collapse
how to configure openvpn client?

mid0k said:
how to configure openvpn client?
Click to expand...
Click to collapse
Read /system/bin/openvpn_scripts/readme.txt and /app/bin/oled_hijack/net.{up,down}

Ballgass said:
Hello I'm new on this matters, so if you could it would be great to have a step by step procedure on how should i do, like what commands to use on balong_flash ... I currently have an Huawei WifiModem E5372
I appreciate your help,
Thanks in advance
Click to expand...
Click to collapse
Maybe you should read readme?

For some reason this firmware does not expose /dev/ttyUSB0 device when connected to a router running Tomato and huawei ethernet driver. I flashed E5372_Update_21.290.17.00.1087/Update_WEBUI_17.100.05.01.1087 files (I can provide on request) and LTE (HiLink) mode started working fine, but I really miss the option for running without battery.
Is it possible to modify this firmware? Or fix lack of /dev/ttyUSB0?

Stasheck said:
For some reason this firmware does not expose /dev/ttyUSB0 device when connected to a router running Tomato and huawei ethernet driver. I flashed E5372_Update_21.290.17.00.1087/Update_WEBUI_17.100.05.01.1087 files (I can provide on request) and LTE (HiLink) mode started working fine, but I really miss the option for running without battery.
Is it possible to modify this firmware? Or fix lack of /dev/ttyUSB0?
Click to expand...
Click to collapse
I think this firmware version has different USB PID/VID which is not known by Tomato. Try to set "AT, Network" option in "USB Mode" screen in Advanced menu.

Thanks for this firmware,
one question. Where is 2.4 5ghz switch, aftef update my wifi is only 2.4?

chudczan said:
Thanks for this firmware,
one question. Where is 2.4 5ghz switch, aftef update my wifi is only 2.4?
Click to expand...
Click to collapse
It should be there. It is present on my device in both web interface and led menu.

Will it work on E5377?

xilen said:
Will it work on E5377?
Click to expand...
Click to collapse
No it won't. But you can donate me the device and I'll make the firmware for it.

hi i have flashed the firmware u provided,
before update my device info
Device name: E5372
Hardware version: CL1E5372SM
Software version: 21.221.19.00.375
Web UI version: 13.100.06.02.375
after update,
Device name: E5372
Hardware version: CL1E5372SM
Software version: 21.290.23.00.00
Web UI version: 17.100.09.03.03
i have only got 2, 3 new feauters,
there is no imei change, or other options in led screen or webui
currently i have only these options in led
device info
zd barcode
wifi band
data roaming
wifi extender
fast boot,
where is other options like you have given the screenshot,
sorry for bad english,

nakhru said:
where is other options like you have given the screenshot
Click to expand...
Click to collapse
Please read included README carefully.
To activate extended menu, press left (WPS) button 7 times on Wi-Fi information screen.
Click to expand...
Click to collapse

ValdikSS said:
Please read included README carefully.
Click to expand...
Click to collapse
Thanks
actually i am facing signal problem from last 2 3 days i have searched my device model and found this post, i got 3, 4 4g(lte) signal but after 5, 10 seconds, i got only 1 signal, i have attached antena but not working another device is working properly i thougt that was software problem so i updated that u provided, but still signal problem not solved if u know about this then help
bad english :crying:

nakhru said:
Thanks
actually i am facing signal problem from last 2 3 days i have searched my device model and found this post, i got 3, 4 4g(lte) signal but after 5, 10 seconds, i got only 1 signal, i have attached antena but not working another device is working properly i thougt that was software problem so i updated that u provided, but still signal problem not solved if u know about this then help
bad english :crying:
Click to expand...
Click to collapse
Try to select only one of the frequency bands in the web interface and see if that helps. If not, something is wrong with the hardware probably.

Question Vivo X80 Pro Firmware Rollback file

Hello Vivo X80 Pro community,
I'm having issues flashing the rollback file from the Android 13 Developer Preview: https://developer.vivo.com/doc/detail?id=120
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My guess is that the hyperlink is linking towards a W30 ROM instead of a W20 ROM. PD2185F_EX_A_12.0.12.5.W20.V000L1-update-full.zip.
Does anyone have a rollback file for the W20 version of the X80 Pro that they can upload to androidfilehost or Google Drive please?
I heard 12.0.11.2 is the best version to do a bootloader unlock so I'm hoping someone has this one, but right now I'll be happy just to go back to Android 12.
Thanks in advance!

it's best to write to Vivo. I couldn't find anything on the internet. Vivo linked an incorrect file.
Service Center | vivo Global
vivo provides comprehensive after-sales services and technical support for products. Check where our service centers are in your location here.
www.vivo.com

I thing the problem is you have a PD2185BF, the roll back is PD2185F....

morpheus620 said:
it's best to write to Vivo. I couldn't find anything on the internet. Vivo linked an incorrect file.
Service Center | vivo Global
vivo provides comprehensive after-sales services and technical support for products. Check where our service centers are in your location here.
www.vivo.com
Click to expand...
Click to collapse
That was the first thing I tried but I was thinking that surely someone had the ROM downloaded.
dzontra83 said:
I thing the problem is you have a PD2185BF, the roll back is PD2185F....
Click to expand...
Click to collapse
This was the A13 file I used to update successfully, so it is likely that PD2185F is my model number.
PD2185F_EX_A_13.1.8.7.W20.V000L1-update-full.zip

hamisgood said:
Hello Vivo X80 Pro community,
I'm having issues flashing the rollback file from the Android 13 Developer Preview: https://developer.vivo.com/doc/detail?id=120
View attachment 5690991
My guess is that the hyperlink is linking towards a W30 ROM instead of a W20 ROM. PD2185F_EX_A_12.0.12.5.W20.V000L1-update-full.zip.
View attachment 5690989
Does anyone have a rollback file for the W20 version of the X80 Pro that they can upload to androidfilehost or Google Drive please?
I heard 12.0.11.2 is the best version to do a bootloader unlock so I'm hoping someone has this one, but right now I'll be happy just to go back to Android 12.
Thanks in advance!
Click to expand...
Click to collapse
Try doing a reset of network only. That worked for me in the past with this issue.

diopskill said:
Try doing a reset of network only. That worked for me in the past with this issue.
Click to expand...
Click to collapse
Would you still happen to have the file you used for the rollback? I have tried to factory reset and it still did not help with the boot issue. I've also reported this to their support and they are working on a fix, but I am not sure how long it would take.
Edit - They fixed the link for the rollback file. I will now try to unlock the bootloader.
Edit 2 - I tried flashing unlocking the bootloader but it seems like it cannot be unlocked due to the June security patch. I am still hoping someone here has the 12.0.11.2 version firmware and it works to flashback...

hamisgood said:
Would you still happen to have the file you used for the rollback? I have tried to factory reset and it still did not help with the boot issue. I've also reported this to their support and they are working on a fix, but I am not sure how long it would take.
Edit - They fixed the link for the rollback file. I will now try to unlock the bootloader.
Edit 2 - I tried flashing unlocking the bootloader but it seems like it cannot be unlocked due to the June security patch. I am still hoping someone here has the 12.0.11.2 version firmware and it works to flashback...
Click to expand...
Click to collapse
Yes I have it ..
PD2185F_EX_A_12.0.11.2-BWDATA.W20.V000L1-update-full_1652274124.zip
drive.google.com

hamisgood said:
Would you still happen to have the file you used for the rollback? I have tried to factory reset and it still did not help with the boot issue. I've also reported this to their support and they are working on a fix, but I am not sure how long it would take.
Edit - They fixed the link for the rollback file. I will now try to unlock the bootloader.
Edit 2 - I tried flashing unlocking the bootloader but it seems like it cannot be unlocked due to the June security patch. I am still hoping someone here has the 12.0.11.2 version firmware and it works to flashback...
Click to expand...
Click to collapse
Did you download it?

diopskill said:
Yes I have it ..
PD2185F_EX_A_12.0.11.2-BWDATA.W20.V000L1-update-full_1652274124.zip
drive.google.com
Click to expand...
Click to collapse
Hi I just requested access! Many thanks for uploading it

Really strange, I am getting this error when trying to flash the package.. I'm gonna try to reboot to recovery and see if this can be flashed..

hamisgood said:
View attachment 5695503
Really strange, I am getting this error when trying to flash the package.. I'm gonna try to reboot to recovery and see if this can be flashed..
Click to expand...
Click to collapse
I flashed thru recovery. Only way it worked for me.

diopskill said:
I flashed thru recovery. Only way it worked for me.
Click to expand...
Click to collapse
Strange I can't flash through recovery, the only option I get is update through network.. Did u get to recover via "adb reboot recovery" or is there different recovery I need to access?

hamisgood said:
Strange I can't flash through recovery, the only option I get is update through network.. Did u get to recover via "adb reboot recovery" or is there different recovery I need to access?
Click to expand...
Click to collapse
I did a reset settings Not the erase all option. That did it for me

diopskill said:
I did a reset settings Not the erase all option. That did it for me
Click to expand...
Click to collapse
What I meant is this, I don't have the option to select the rom file apparently.
A few days ago I did have the option which is why I'm confused now

hamisgood said:
What I meant is this, I don't have the option to select the rom file apparently.
A few days ago I did have the option which is why I'm confused now
Click to expand...
Click to collapse
Oh...
I have that after every time I switch between beta and stable. Reset all settings fixes it every time.

diopskill said:
Oh...
I have that after every time I switch between beta and stable. Reset all settings fixes it every time.
Click to expand...
Click to collapse
Thanks! I will try resetting tonight or tomorrow if I have the time.
I do want to root (been using rooted Android since the Kindle Fire -> Galaxy S3 -> G2 -> V20 -> OP3T -> OP5T -> OP7T), but I seem to be surviving without root after blocking Ads through using AdGuard on private DNS settings.
Not being able to freeze apps on Titanium Backup is a bit of a pain but my banking apps work perfectly is pretty good upside.

hamisgood said:
Thanks! I will try resetting tonight or tomorrow if I have the time.
I do want to root (been using rooted Android since the Kindle Fire -> Galaxy S3 -> G2 -> V20 -> OP3T -> OP5T -> OP7T), but I seem to be surviving without root after blocking Ads through using AdGuard on private DNS settings.
Not being able to freeze apps on Titanium Backup is a bit of a pain but my banking apps work perfectly is pretty good upside.
Click to expand...
Click to collapse
I'm in the exact same boat. As you!! Nothing else to add lol!

diopskill said:
Try doing a reset of network only. That worked for me in the past with this issue.
Click to expand...
Click to collapse
Did reset network, all settings, but nothing helped

After I try to install A13 zip and failed of course I am receiving notification for a new version. I install this version and after another failed try of A13 is giving me the same version to download and install. And this is every time I try to install A13 I get PD2185F_EX_A_12.0.13.1.W30.