Do not update to android 6.0.1! - Galaxy S6 Edge+ General

im from iraq and i downloaded the new marshamallow firmware thru odin (Update,without format or restore)
everything is awesome
except that the battery is draining
the charging is slower
and the device is heating
any recommendations for me if im wrong?

In my case 5.1.1 also used to drain battery fast.
I just got the OTA 6.0.1 G928C here in Sri Lanka and I did notice the battery takes a lil longer to charge.
Also, before in 5.1.1 in the battery usage Android System was the biggest drainer which has now changed (rightfully?) to the screen.
I'm charging this fully right now to see the overnight drain as it used to be crazy before. And by tomorrow I'll know for sure how good/bad the drain is battery wise.
Other than that the update is fine and smooth.
Sent from my SM-G928C using Tapatalk

i think you need factory reset/update

Are you knox 0X1 or 0X0?
If you are knox 0X1 this is the reason fuss battery drain, like Note 5 on mm.
And of course you need a factory reset for this main update.
Στάλθηκε από το SM-G928F μου χρησιμοποιώντας Tapatalk

eliashadow said:
Are you knox 0X1 or 0X0?
If you are knox 0X1 this is the reason fuss battery drain, like Note 5 on mm.
And of course you need a factory reset for this main update.
Στάλθηκε από το SM-G928F μου χρησιμοποιώντας Tapatalk
Click to expand...
Click to collapse
Why a KNOX warantly can drain fast the battery?

factory reset and re flash MM

Yvan12 said:
Why a KNOX warantly can drain fast the battery?
Click to expand...
Click to collapse
Only Samsung knows that.
If you read at Note 5 thread you will see this issue and there is a fix from devs about that.
Everyone updated on mm with knox 0X1 had battery drain and this is a fact.
Στάλθηκε από το SM-G928F μου χρησιμοποιώντας Tapatalk

eliashadow said:
Are you knox 0X1 or 0X0?
If you are knox 0X1 this is the reason fuss battery drain, like Note 5 on mm.
And of course you need a factory reset for this main update.
Στάλθηκε από το SM-G928F μου χρησιμοποιώντας Tapatalk
Click to expand...
Click to collapse
God forbid.
Where will these ideas with knox 0x1 = drain?
You need factory reset after flash with Odin or after OTA and all is OK.
Sent from my powerful G928F via Tapatalk .

narcis1974 said:
God forbid.
Where will these ideas with knox 0x1 = drain?
You need factory reset after flash with Odin or after OTA and all is OK.
Sent from my powerful G928F via Tapatalk .
Click to expand...
Click to collapse
Maybe God forbid your words ...
Read and see please:
http://forum.xda-developers.com/not...ix-tripped-t3319164/post65430248#post65430248
The phone don't deep sleep cause knox 0X1.
I'm not sure if this is the problem here, but it's something that note 5 has.
Στάλθηκε από το SM-G928F μου χρησιμοποιώντας Tapatalk

eliashadow said:
Maybe God forbid your words ...
Read and see please:
http://forum.xda-developers.com/not...ix-tripped-t3319164/post65430248#post65430248
The phone don't deep sleep cause knox 0X1.
I'm not sure if this is the problem here, but it's something that note 5 has.
Στάλθηκε από το SM-G928F μου χρησιμοποιώντας Tapatalk
Click to expand...
Click to collapse
To 6.0.1 for G925f or G920f everything is ok.No drain issue.
Sent from my powerful G928F via Tapatalk .

narcis1974 said:
To 6.0.1 for G925f or G920f everything is ok.No drain issue.
Sent from my powerful G928F via Tapatalk .
Click to expand...
Click to collapse
That's good news.
But all here just want the best for our phones and it's helpful to share our experiences from others thread. Im owner of note 5 too and the battery drain causing from tripped knox is a fact .
So maybe I'm wrong but I wanted to share my experience from note 5 and marshmallow update with battery drain.
Στάλθηκε από το SM-G928F μου χρησιμοποιώντας Tapatalk

narcis1974 said:
God forbid.
Where will these ideas with knox 0x1 = drain?
You need factory reset after flash with Odin or after OTA and all is OK.
Sent from my powerful G928F via Tapatalk .
Click to expand...
Click to collapse
Actually he's right.. I have knox tripped and I went back to latest 5.1.1 few days ago and android system used somewhere between 30-40% battery and battery drained REALLY fast.. I'd say about twice as fast as normal. Clicking on Android system, to see what is in that group, reveals a lot of knox related stuff. I tried reflashing via odin and factory reset a few times but the issue remained. Then I read of this problem and flashed arter kernel yesterday and battery is back to normal and as it deletes knox completely android system now drains about 1-3% and when clicking on it there's no more knox entries...
My guess would be that as knox is tripped, it doesnt really work anymore, but deep in the system there's still a lot of knox related stuff and there's a conflict or something that causes it to drain battery..

eliashadow said:
That's good news.
But all here just want the best for our phones and it's helpful to share our experiences from others thread. Im owner of note 5 too and the battery drain causing from tripped knox is a fact .
So maybe I'm wrong but I wanted to share my experience from note 5 and marshmallow update with battery drain.
Στάλθηκε από το SM-G928F μου χρησιμοποιώντας Tapatalk
Click to expand...
Click to collapse
So I just checked mine too and my Knox is 0x1. Probably the original seller did some flashing before I got the phone as it was an imported device. Probably explains the crazy battery drain I had in 5.1.1.
I didn't really go thru XDA and thought it was a pretty common issue and waited for MM.
Should I just go ahead with a factory reset and re-flash MM? Does that clear out Knox?
Sent from my SM-G928C using Tapatalk
---------- Post added at 01:07 AM ---------- Previous post was at 12:54 AM ----------
Reading that Note 5 thread now. Maybe I'll wait till morning to see how my battery drain is and if it's bad might do a factory reset.
Sent from my SM-G928C using Tapatalk

Knox trips from rooting your device.
Sent from my mobile.

thahim said:
Knox trips from rooting your device.
Sent from my mobile.
Click to expand...
Click to collapse
From what people are saying thiugh flashing the c marshmallow firmware in the f variant trips knox too
Sent from my SM-G928F using Tapatalk

OK so my battery drain is crazy as I woke up in the morning with the phone being very hot and it had drained to 23% from c. 70% with Android OS being the culprit. So I have the same issue as 5.1.1. So probably the Knox issue 0x1 is the culprit here.
Gonna read around and see what I can do about this. This is just annoying cuz when I got this device I thought I'm done with down with tinkering.
Sent from my SM-G928C using Tapatalk

Drizzy xS said:
From what people are saying thiugh flashing the c marshmallow firmware in the f variant trips knox too
Sent from my SM-G928F using Tapatalk
Click to expand...
Click to collapse
So they are doing wrong.
Sent from my mobile.

Hello. No problem for me. I have Android 6 on my G928F and he work great. Fast and no bug ...
My battery not draining.
Envoyé de mon SM-G928C en utilisant Tapatalk

thahim said:
So they are doing wrong.
Sent from my mobile.
Click to expand...
Click to collapse
So can you confirm that it does not trip the Knox counter?
Sent from my Nexus 9 using Tapatalk

I can confirm that it does NOT trip knox. Flashed G928C firmware on my G928F with no problems. Just follow the exact instructions in the [HOW-TO] Android 6.0.1 working on SM-G928F! thread!

Related

How yo revert back to Previous Version ?F240s

Hi
Since i`v installed the 10w update motion sensores were stoped
Working how can i go back to the previous version?
Thanks!!
GUARDIANBD said:
Hi
Since i`v installed the 10w update motion sensores were stoped
Working how can i go back to the previous version?
Thanks!!
Click to expand...
Click to collapse
Make a factory reset and if the problem isn't solved try to reflash the update
Στάλθηκε από το LG-P880 μου χρησιμοποιώντας Tapatalk 2
Thanks for answering
Done already same issue.
Frostrating How to revert to previous version?
Where i can get the 10v update to reflash it?

Knox counter reset

Is there any way to reset the Knox counter?
In God we trust rest we virus scan
AshokN7100 said:
Is there any way to reset the Knox counter?
In God we trust rest we virus scan
Click to expand...
Click to collapse
NO you can't reset the counter (
For more info you can read this: http://forum.xda-developers.com/showthread.php?t=2447832 OR http://www.xda-developers.com/android/knox-friendly-root-for-multiple-galaxy-note-3-variants/
No at the moment... But I believe...
Sent from somewhere with my UZgalaxyNote2
Thanks
I wish we find a solution for that very soon
@dr.ketan
SM-N910C cihazımdan Tapatalk kullanılarak gönderildi

Secret menu Option.

Hi all my friends.
I want to ask please if anyone knows what is the device tet/MT?
This is on secret menu.
Because without want it i press it and ask me the device to run att mode.
Thanks.
http://forum.xda-developers.com/g4/help/how-to-enter-g4-hidden-menu-t3122373
http://forum.xda-developers.com/g4/general/access-verizon-hidden-menu-g4-t3129802
the_scotsman said:
http://forum.xda-developers.com/g4/help/how-to-enter-g4-hidden-menu-t3122373
http://forum.xda-developers.com/g4/general/access-verizon-hidden-menu-g4-t3129802
Click to expand...
Click to collapse
Thanks i ask and there.
Στάλθηκε από το LG-H815 μου χρησιμοποιώντας Tapatalk

Sm a510f stuck on first logo

Hello ...i am a technician and for the vwry first time i cant solve this problem with sm a510f.
The device for some how it has bricked.
Now i cant get into recovery mode probably because of re-activation blocked.
I can get into download mode.
The device stuck on first logo as shown on picture and cant get on SAMSUNG logo or further.
I cant flash CF AUTO ROOT or TWRP or downgraded to LOLYPOP 5.1.1 which i have the 4 files repair firmware probably because FRP is on.
I can only flash both of MASMARLOW 6.0.1 and NOUGAT 7.0
Even everything i tried the device cant go any further than the first logo.
Is anyone can help me?
Thank you in advance.
Στάλθηκε από το MI MAX 2 μου χρησιμοποιώντας Tapatalk
Giannisk36 said:
Hello ...i am a technician and for the vwry first time i cant solve this problem with sm a510f.
The device for some how it has bricked.
Now i cant get into recovery mode probably because of re-activation blocked.
I can get into download mode.
The device stuck on first logo as shown on picture and cant get on SAMSUNG logo or further.
I cant flash CF AUTO ROOT or TWRP or downgraded to LOLYPOP 5.1.1 which i have the 4 files repair firmware probably because FRP is on.
I can only flash both of MASMARLOW 6.0.1 and NOUGAT 7.0
Even everything i tried the device cant go any further than the first logo.
Is anyone can help me?
Thank you in advance.
Στάλθηκε από το MI MAX 2 μου χρησιμοποιώντας Tapatalk
Click to expand...
Click to collapse
Sorry bur i cant post the picture.
The first logo that i mean is when device boots it show SAMSUNG GALAXY A5 6 POWERD BY ANDROID.
Στάλθηκε από το MI MAX 2 μου χρησιμοποιώντας Tapatalk
Giannisk36 said:
Sorry bur i cant post the picture.
The first logo that i mean is when device boots it show SAMSUNG GALAXY A5 6 POWERD BY ANDROID.
Στάλθηκε από το MI MAX 2 μου χρησιμοποιώντας Tapatalk
Click to expand...
Click to collapse
I forgot to m say that even KIES AND SMART SWITCH cant regognise the device
Στάλθηκε από το MI MAX 2 μου χρησιμοποιώντας Tapatalk

[ROM][E500H][WIP][TW-7.1.1] Touchwiz Nougat Porting For Galaxy E5

Due to my HDD got corrupted. I lost all my files. Project is dead.
https://mega.nz/#!6twC3CrT!3OwanKW3zbgHjpe8PJphbePASmtry-Ssj8baLLfTyQU
AEX patch with J5 2016 kernel built for E5. Test it and give results back
Tisenoiazei100 said:
https://mega.nz/#!6twC3CrT!3OwanKW3zbgHjpe8PJphbePASmtry-Ssj8baLLfTyQU
AEX patch with J5 2016 kernel built for E5. Test it and give results back
Click to expand...
Click to collapse
Start logo. But i use Cosmic Os... No kmsg.
BusuDD said:
Start logo. But i use Cosmic Os... No kmsg.
Click to expand...
Click to collapse
Use AEX
Στάλθηκε από το d5110 μου χρησιμοποιώντας Tapatalk
Tisenoiazei100 said:
Use AEX
Στάλθηκε από το d5110 μου χρησιμοποιώντας Tapatalk
Click to expand...
Click to collapse
I'll stay on COS. I need device for use.
if got issues after installing will my device get well again if i flash AEX kernel at Rio's post ?
yashsingh20001 said:
if got issues after installing will my device get well again if i flash AEX kernel at Rio's post ?
Click to expand...
Click to collapse
Yes
Στάλθηκε από το d5110 μου χρησιμοποιώντας Tapatalk
okay so ill provide the file when it's day in india
Eagerly waiting for it☺
Hey are you still working on it?
Im really sad that I'm not able to help cause i dont have my pc and wifi right now I'm on a holiday... So i dont want to mess by device hope you understand.... I'll give you the files as soon as i return
khurshidhoque said:
Hey are you still working on it?
Click to expand...
Click to collapse
Yes i do.
Ok...will be waiting for it☺
Here's another AEX patch with my kernel in it
https://mega.nz/#!GwBkFCpB!IPdI5sbBwQeKPSqsi-HrEAOz4ieAI1Hj_SLm169fToc
This time ive done cleanups, used J5 2016 msm8916-sec(with removed rooting restrictions) and generic E5_eur defconfig instead of E53G_eur one.
Test it and give results back.
If it boots ill start on TW-NN if it gets stuck at boot logo, let it stay like this for a minute or two, go to recovery, DO NOT WIPE! and with TWRP file manager locate to proc and copy last_kmsg to your sdcard.
Install this patch like generic AEX patch...
Please one for e700h
No development of this device

Categories

Resources