[ROM][6.0.1][LVM] Cyanogenmod builds for new LCD - Oppo Find 7 and 7a

Hi Everyone,
I've built Cyanogenmod with CM made patches to include the latest kernel from Oppo's Project Spectrum, thereby supporting the new Find 7 LCD panels. Please make backups and let your fellow Android flashaholics know your results.
This build is for LVM storage only.
Known issues:
The standard CM updater will likely break this modified rom. Please only update by flashing builds from this thread.
Sources:
Cyanogenmod Github
Patch #1
Patch #2
Wuxianlin's LVM device tree
Download:
cm-13.0-20160303-UNOFFICIAL-find7s.zip - Current
cm-13.0-20160301-UNOFFICIAL-find7.zip
THIS IS AN EXPERIMENTAL AND POTENTIALLY UNSTABLE BUILD - ALWAYS BACKUP.
I'll keep uploading builds if there's enough interest. Please post feedback below.

So you have tested them or not?

maxwen said:
So you have tested them or not?
Click to expand...
Click to collapse
My results were that Cyanogenmod booted fine, but I'm on LVM so couldn't test properly. I haven't tested Nameless out yet but will next chance I get.
Slightly unrelated - Thank you for getting OmniRom on a kernel with the new LCD support so early, you've saved my Find7 for these past few months!

Pojiku said:
My results were that Cyanogenmod booted fine, but I'm on LVM so couldn't test properly. I haven't tested Nameless out yet but will next chance I get.
Slightly unrelated - Thank you for getting OmniRom on a kernel with the new LCD support so early, you've saved my Find7 for these past few months!
Click to expand...
Click to collapse
Hi, install and boot works fine, display works fine, but not LVM supported
Anyway thanks for your work, i will wait for new build with lvm support.
Thanks :good:

Since Nameless had a few issues I don't have the time to fix, I've decided to focus on Cyanogenmod builds.
The latest CM build (2015-03-03) fixes screen gestures and switches to LVM storage.

Could you build for x9007/6?
Отправлено с моего Find7 через Tapatalk

Pojiku said:
Since Nameless had a few issues I don't have the time to fix, I've decided to focus on Cyanogenmod builds.
The latest CM build (2015-03-03) fixes screen gestures and switches to LVM storage.
Click to expand...
Click to collapse
Yeah it works! I have found only a serious bug: i have no sounds of any kind: no music, notifications, etc.
Everything else works or seems to works fine: 4g, wifi, calls, everything.
Thanks so much for the rom, long time waiting for this.

Pojiku said:
Slightly unrelated - Thank you for getting OmniRom on a kernel with the new LCD support so early, you've saved my Find7 for these past few months!
Click to expand...
Click to collapse
You are welcome - if you have any more questions just contact me

I've flashed this rom and from my experience, the only real bug that is here is the fact that sound does not work at all unless using headphones. Could you by any chance port MaxxAudio from the original ColorOS onto this or the Camera?

Pojiku said:
...I'll keep uploading builds if there's enough interest. Please post feedback below.
Click to expand...
Click to collapse
Hi Pojiku.
Good job man. Don't wait if there wiil be interest to upload builds. Go my friend because i'm sure many find 7's owners are waiting for this impatiently in particular those who own a find 7 with new lcd panel like me. I m on omni, it s a very good rom with a very good dev. Today due to an incompatibility, i m forced to stay on an old omni build and cannot update. So i think that your rom could be a solution for me. I will wait a new build fixing the sound issue and be sure i will flash your rom to test it.
Thank you for your invest and your time.
Good luck.
---------- Post added at 05:54 AM ---------- Previous post was at 05:47 AM ----------
Thank you for getting OmniRom on a kernel with the new LCD support so early, you've saved my Find7 for these past few months!
Click to expand...
Click to collapse
that goes for me too. Without maxwen I'll still be on color os or spectrum both of which are bugged.
Thanks Max

Hi Pojiku
I ve tried the lastest build and i m vey exciting. Please continue your work and release a new build to fix the sound issue.
Can't wait lol.

Due to lack of Clear Kernel Source, this thread is in violation of GPL License as well as XDA Rules. Hence it is closed.
OP Check your PM and respond in order to get it reopened.

Related

cm13 on the way?

hi guys, we've got 5.1.1 officially but cm13, based on android 6.0, is even sweeter (doze, app permission control, etc) . did you hear any news from devs?
It looks like that Temasek and Joshndroid are already preparing an unofficial CM 13 Build for our SM-P600 Tablet.
Look at https: //github.com/temasek/android_packages_apps_Settings/commits/cm-13.0
&
https: //github.com/Joshndroid/device_samsung_lt03wifi/tree/cm-13.0-test-rebasecm12
I can tell you that the p600 will get official CM13 if @joshndroid, @ Shawn, and myself can figure out why we get a black screen after rebooting from recovery.
Sent from my SM-P600 using Tapatalk
we are trying as hard as we can. hopefully we all can come up with the goods, I have put a lot of time into it already pushing to cm's gerrit to fix broken things, but unfortunately i cant do it on my own. Shawn and orion116 are definitely assisting in getting this done, hopefully raymanfx comes to the party as well lol
joshndroid said:
we are trying as hard as we can. hopefully we all can come up with the goods, I have put a lot of time into it already pushing to cm's gerrit to fix broken things, but unfortunately i cant do it on my own. Shawn and orion116 are definitely assisting in getting this done, hopefully raymanfx comes to the party as well lol
Click to expand...
Click to collapse
How is the status? Any progress?
Stogie87 said:
How is the status? Any progress?
Click to expand...
Click to collapse
i am getting succesful builds but am getting black screen (back light turns on but nothing shows). unsure whether its kernel or vendor related or even tree related with something not activated? looking at some other device trees to see what they have changed
ok, this tricky problem still reamains. I have seen, that temasek released his second alpha build of cm 13. You don't want to use his source again for further releases?
Stogie87 said:
ok, this tricky problem still reamains. I have seen, that temasek released his second alpha build of cm 13. You don't want to use his source again for further releases?
Click to expand...
Click to collapse
best to work on the base cm rom first before working on derivatives. I will be releasing a temasek rom for cm-13.0. But we need cm-13.0 working first. More hands on a single distro makes hopefully better/lighter work. Once we get a cm happening, all the derivatives will come next so everyone wins.

[Testing]Cyanogenmod 13 - Unofficial

Hey guys,
I've just managed to make a build of Cyanogenmod with lots of help by a guy called sultanqasim (actually he did most of the work), thanks a lot bro
Probably it's very bugy. Let's call it Pre-Alpha. Anyway, the build is ready and I need guys who'd like to try it out.
I chase GDrive for the first CM build. All Beanstalk builds are uploaded to the official Beanstalk AFH.
Currently working:
Display
WiFi
Bluetooth
Sensors
Audio through bluetooth
NFC
Broken:
Audio through built in speakers or headphones
RIL
Camera
Mic
Various other smaller things
Some Sprint users also report that it doesn't work for them. Just try it out if you like. Every tester's report takes the project a bit closer to stable builds.
Download Cyanogenmod (GDrive)
Download Beanstalk (AndroidFilehost)
To flash it:
in TWRP, reformat the userdata partition as unencrypted ext4. Go to Wipe->Advanced Wipe, select data, click on repair or change filesystem, change file system, and choose ext4.
in TWRP, go to Wipe -> Advanced wipe, and erase system, data, dalvik, and cache
flash the file by pushing it to your sdcard or you can use adb sideload. Also you can flash GApps optionally.
reboot into the system
Looking forward to your reviews. Thanks a lot
Good luck to all of you
Remember: I'm not responsible for anything that could happen as a result of following my instructions or anything else.
XDA:DevDB Information
[Testing][ROM] Cyanogenmod 13 - Unofficial, ROM for the HTC 10
Contributors
krassermensch, sultanqasim
Source Code: https://github.com/sultanqasim
ROM OS Version: 6.0.x Marshmallow
Based On: Cyanogenmod
Version Information
Status: Testing
Created 2016-06-10
Last Updated 2016-07-13
If you like my work consider a donation to support me in financing computer-components which are meant to replace the defect ones in my broken PC.
If you donate you'll donate to my father who will gimme the money. Thank you really much!
Nice!
Moderator Information,
Thread re-opened to allow OP to upload file on XDA host.
Can't wait for CM13 on this phone. I know Squid2 has been a ton of work into this, from what I know, already a solid month behind the scenes.
device boots up? display?
thought this thread was closed till a download link was posted...
i don't seem to find any link or me gone blind lolll
edit:- just read that its opened for uploading the link so it seems upload is in progress
Maybe change the title with correct spelling of " Unofficial "
We've had a booting and partially working version of CM13 for a while now, it's posted by @squid2 somewhere in the guides and discussion thread. Which, makes me wonder, with all due respect, how this is any different from that build?Have there been any fixes to the broken things on that ROM (most of the radio, for example) that warrant this being a separate version of CM13?
psych0r3bel said:
We've had a booting and partially working version of CM13 for a while now, it's posted by @squid2 somewhere in the guides and discussion thread. Which, makes me wonder, with all due respect, how this is any different from that build?Have there been any fixes to the broken things on that ROM (most of the radio, for example) that warrant this being a separate version of CM13?
Click to expand...
Click to collapse
i guess we would need to wait for the upload to be finished to see if its any different or the same as the Op doesn't seem to be much of responding to any comments
@krassermensch - Can you give us a list of what is and isn't working in your experience, at least?
psych0r3bel said:
We've had a booting and partially working version of CM13 for a while now, it's posted by @squid2 somewhere in the guides and discussion thread. Which, makes me wonder, with all due respect, how this is any different from that build?Have there been any fixes to the broken things on that ROM (most of the radio, for example) that warrant this being a separate version of CM13?
Click to expand...
Click to collapse
Hey, squid2 is the guy I named sultanqasim in the first post of this thread as sultanqasim is his GitHub name. I managed to build Cyanogenmod with his help and his sources. He's the main developer. I'm just trying to make a more current build for those who'd like to have one. As a result my builds are based on his latest commits. I'm just the one who did minor patches which aren't as relevant as the ones squid2 performed. He's the more experienced one of us. You should treat me like a maintainer and him like the main ROM developer.
krassermensch said:
Hey, squid2 is the guy I named sultanqasim in the first post of this thread as sultanqasim is his GitHub name. I managed to build Cyanogenmod with his help and his sources. He's the main developer. I'm just trying to make a more current build for those who'd like to have one. As a result my builds are based on his latest commits. I'm just the one who did minor patches which aren't as relevant as the ones squid2 performed. He's the more experienced one of us. You should treat me like a maintainer and him like the main ROM developer.
Click to expand...
Click to collapse
Hah, thanks for clearing that up - good to know. Didn't mean to attack you, just asking the questions trying to keep it all honest. So should we assume his working/not working list applies here?
psych0r3bel said:
Hah, thanks for clearing that up - good to know. Didn't mean to attack you, just asking the questions trying to keep it all honest. So should we assume his working/not working list applies here?
Click to expand...
Click to collapse
Don't mind. I really want to let everyone know that the main work was made by sultanqasim as I'm not willing to steal anyone's work. I just want to provide a more current build of his work to the community. Assume some minor things have already been fixed but it's probable that you'll experience camera, nfc, radio... issues here as well... I also hope this'll be fixed soon
I'm really glad to see this coming along! Keep up the good work. I'm not much of a tester normally but I think Im going to give it a shot later tonight and let you know what issues I can find.
krassermensch said:
Don't mind. I really want to let everyone know that the main work was made by sultanqasim as I'm not willing to steal anyone's work. I just want to provide a more current build of his work to the community. Assume some minor things have already been fixed but it's probable that you'll experience camera, nfc, radio... issues here as well... I also hope this'll be fixed soon
Click to expand...
Click to collapse
So glad to see the credits given, and insight to what testers will find.
Didn't want to see any drama, I thanks for putting the time in and squid for laying these ground work!
Sent from my HTC 10 using XDA-Developers mobile app
@krassermensch, thanks for your efforts but... If you're going to publish his work, how about updating the OP with his bug list and the title with pre-alpha. Just so users have more information, instead of the vague "it might be buggy". We know its buggy. Specifics about what works and doesn't is what people would like to know.
This still accurate?
squid2 said:
Currently working:
Display
WiFi
Bluetooth
Sensors
Audio through bluetooth
Broken:
Audio through built in speakers or headphones
RIL
Fingerprint sensor
Camera
Various other smaller things
Click to expand...
Click to collapse
Moderator Information,
Thread has been moved to general, as the OP is only hosting the work for another user.
Hi, I flashed your rom with the open gapps, booted up and connected to wifi and logged in through google. I don't have any cellular connection though. I am making a nano back-up of this and going back to stock until I figure out the cellular connection. Let me know how I can help or report bugs to you.
matteosaeed said:
Hi, I flashed your rom with the open gapps, booted up and connected to wifi and logged in through google. I don't have any cellular connection though. I am making a nano back-up of this and going back to stock until I figure out the cellular connection. Let me know how I can help or report bugs to you.
Click to expand...
Click to collapse
I think the RIL is not working yet which is what you need for the cellular connection. This definitely needs more work before its useable. But really good progress to date.
rav101 said:
I think the RIL is not working yet which is what you need for the cellular connection. This definitely needs more work before its useable. But really good progress to date.
Click to expand...
Click to collapse
Sweet. I can test more at nights when I am at home. Doing the nanodroid now of this build.
---------- Post added at 09:17 PM ---------- Previous post was at 08:52 PM ----------
question, I am trying to go back but I am getting the failed to mount '/system' (invalid argument), any tips on how to bypass that?

Various ROMs for GX8 [9/24/16]

So I've been building some roms for this device for a while now and figured I'd share my personal builds. I do not have the time to officially maintain these or provide any support which is why I'm posting them here. Hopefully it doesn't get removed. These have been tested on the US variant.
ROMs I'm currently building weekly-ish:
CM13 - credits to the CM team. Moved. Please see this thread for updates.
Bliss - credits to the CM and Bliss team. As of 8/12/16 this ROM is currently discontinued until if/when the source starts working again. Nothing I can do about this. Last build can be downloaded here.
Resurrection Remix - credits to the CM and RR team. Moved here.
CAF-AOSP - See main thread here.
The device tree, kernel, and vendor stuff is all coming from @surdu_petru He's done an outstanding job on this device. We should all be thankful for the work he has done which has allowed things like CM to work on this device. I have rolled back some of the changes in his latest version to fix some of the issues introduced on his most recent sources. You should all buy him a beer if/when he returns
I'd also like to give credit to @EarlyMon and ncrypt3d for their guidance and willingness to teach a newbie.
Disclaimer: I am not responsible if you break your phone using these files. Educate yourself before using them.
Installation: Same as the CM13 requirements found here: http://forum.xda-developers.com/gx8/development/rom-t3342802
Gapps: I've only tested these with opengapps.
Sources:
CM: https://github.com/CyanogenMod
Bliss: https://github.com/BlissRoms
Resurrection Remix: https://github.com/ResurrectionRemix
Device: https://github.com/Huawei-Dev/android_device_huawei_rio
Kernel: https://github.com/Huawei-Dev/android_kernel_huawei_msm8939
Vendor: https://github.com/Huawei-Dev/android_vendor_huawei_rio
9/24/16 - Thread created for resurrection remix in the appropriate forum. This thread is effectively obsolete.
9/17/16 - Now helping build weeklies for the main CM13 thread. Resurrection Remix updated to include latest device fixes and snapdragon camera.
9/8/16 - CM13 discontinued now that the dev has returned. Please see his thread for future updates and give him your thanks. Bliss is still broken. Resurrection remix has been updated to latest sources and includes Sept 2016 security patches. DT2W should be working.
9/1/16 - Weekly updates.
Can you work on his MM Emui version so that it does not cause the flickering issue when flashed? As you have the US model {RIO-L03} i hope.
Huawei has not released M for the US and I haven't heard of any plans to update it. Nothing I can do about that. Unfortunately these roms require the tz.img from the foreign M release for the fingerprint to work. These builds will check to make sure the tz.img matches or the install will fail. Again this is all work done by @surdu_petru.
Long story short, nothing I can do. Yell at Huawei for providing no support in the US for this phone.
You should do a separate topic with changelogs for every rom.
It would look better and cleaner.
Going to test ressurection and bliss.
Where do we report for any bugs?
Best of luck.
AndroidNewb666 said:
You should do a separate topic with changelogs for every rom.
It would look better and cleaner.
Going to test ressurection and bliss.
Where do we report for any bugs?
Best of luck.
Click to expand...
Click to collapse
Please re-read second sentence in the OP.
redbeard1083 said:
Please re-read second sentence in the OP.
Click to expand...
Click to collapse
Yeah sorry ,i did end up reading it and forgot to edit...
Anyways, too bad you dont have time... You did a very nice job on the ROMs.
The Bliss rom is just outstanding
Cheers.
AndroidNewb666 said:
Yeah sorry ,i did end up reading it and forgot to edit...
Anyways, too bad you dont have time... You did a very nice job on the ROMs.
The Bliss rom is just outstanding
Cheers.
Click to expand...
Click to collapse
Have you tried all of them? Which one did you like Best?, is less glitchy
Snarfer90 said:
Have you tried all of them? Which one did you like Best?, is less glitchy
Click to expand...
Click to collapse
They are all the same but each one has its own features regarding customization.
The Bliss Rom and Ressurection were the best ones because they are packed with features that CM doesn't have.
I'd go for Bliss.
Big thanks for the builds... great work... Can someone confirm that d2tw works... For me this option seems to be broken... I tried RR bliss and cm
Gesendet von meinem HUAWEI RIO-L01 mit Tapatalk
Is this build actually working with RIO-L01 (Single-Sim)?
Thanks!
alex636 said:
Big thanks for the builds... great work... Can someone confirm that d2tw works... For me this option seems to be broken... I tried RR bliss and cm
Gesendet von meinem HUAWEI RIO-L01 mit Tapatalk
Click to expand...
Click to collapse
It's currently broken. These are essentially running an older version of @surdu_petru's code before I started seeing wifi and ril issues on my device.
Can you provide a download link for the bliss rom... Thanks @AndroidNewb666
KobySam87 said:
Can you provide a download link for the bliss rom... Thanks @AndroidNewb666
Click to expand...
Click to collapse
See link at bottom of OP. Speaking of bliss, that seems to be broken since the last big CM update. New builds are no good until the bliss team fixes it (if they even choose to fix it with CM14 on the horizon).
redbeard1083 said:
See link at bottom of OP. Speaking of bliss, that seems to be broken since the last big CM update. New builds are no good until the bliss team fixes it (if they even choose to fix it with CM14 on the horizon).
Click to expand...
Click to collapse
Will you advise that I wait for a stable rom????
KobySam87 said:
Will you advise that I wait for a stable rom????
Click to expand...
Click to collapse
You should do whatever you think is best. I have no opinion on whether or not it's the right decision for you.
d3nni said:
Is this build actually working with RIO-L01 (Single-Sim)?
Thanks!
Click to expand...
Click to collapse
I don't know. Did the CM13 builds ever work on your device? This uses the same kernel. If it worked there, these should also work.
d3nni said:
Is this build actually working with RIO-L01 (Single-Sim)?
Thanks!
Click to expand...
Click to collapse
Yes, it is working well.
new weeklies uploading now.
krispin said:
Yes, it is working well.
Click to expand...
Click to collapse
Good to know. Thanks.

[LOS][OMS] ][HTC 10] rESURRECTION rEMIX N [5.8.2][7.1.1] uNOFFICIAL [ Nightly Mar 19]

Code:
*** Disclaimer***
No legal responsibility taken for anything.
use at own risk.
I am not a Developer . Just sharing the RR project with updates and mergers faster for users
Install with full knowledge that this might make your phone 100% unusable and will void your device warranty .
Briefing​
This is my own personal RR N build, based on 14.1. i will build the ROM ASAP once crpalmer merges any new codes .
I will upload the ROM if it Boots fine in my personal device
i am not offending anybody's build especially the Official RR thread . i just keep this thread updated daily .
please dont complain anything about the BUGS as all bugs in CM14.1 are present in my build too
Feel free to contribute, recommendations and (new) bug reports are always very welcome.
I am a newbee here if any mistakes please let me know
Click to expand...
Click to collapse
Features & Details​
FULL Substratum theme engine support with Masquerade and OMS
Compatible fully with both firmware (MM and N)
SELinux ENFORCING
Build USING Ubuntu 16.04 in Windows using VM
Click to expand...
Click to collapse
INSTRUCTIONS
Download the Rom & and ARM64 7.1 GAPPS .
Reboot to TWRP recovery .
Flash ROM and then GAPPS
Flash Custom Kernel ( Personal recomendation i am using V7.0.2-Beta Android N )
If running Nougat firmware (2.0+) you will need to flash fingerprint patch to use the home button
Click to expand...
Click to collapse
BUGS
Same as CM 14.1 ... i am not listing the bugs
ChangeLog
Add headphones backend (fixes headphones)
WIFI fix ( may be check it out yourself)
Developer settings fixed
USB tethering fixed ( working for me)
Night mode working
Bug fixes
VOIP application issue fixed when it comes for audio
Added Aptx Bluetooth Support
[*] Touch Screen Gestures added
Note :- please dont ask for BUG fixes FYI i am not a developer ... solutions and recommendations are welcome
Downloads
RR-N-v5.8.2-20170319-pme-Nightly.zip
Finally an OMS build .... No help got from any of the devs out here in XDA ... Finally managed to get the OMS in my build.
Thanks a lot to my best mate who helped me in guiding on github and gerrits ++ thanks @ mihran
GAPPS:-
Optional
substratum theme engine
XDAevDB Information
Resurrection Remix ROM N UNOFFICIAL for the HTC 10
Contributors crpalmer
Version Information
Status: Beta
Created 26.12.2016
Source Code Rom
https://github.com/vysakhraju/platform_manifest
Original Rom thread by @Eliminater
=[url]http://forum.xda-developers.com/htc-10/development/rom-resurrection-remix-m-t3440977[/URL]
Thanks alot!
Where is FP patch?
ali nz said:
Thanks alot!
Where is FP patch?
Click to expand...
Click to collapse
As i have not got the permission to use the finger print patch please use the one from CM14.1 thread by @ibrokemypie
 @ibrokemypie :- Can i use your finger print patch for my ROM ?
Dec 26th Build with OMS updated in OP
OP I'm on your last build of RR unofficial from 12.22 from the other thread.
do you require or recommend a clean flash for this or can it flash dirty? thank you!
VR32 said:
OP I'm on your last build of RR unofficial from 12.22 from the other thread.
do you require or recommend a clean flash for this or can it flash dirty? thank you!
Click to expand...
Click to collapse
I did dirty flash and is wokring fine
thanks man I'll give it a go
Hi All
Need your support to add OMS support to this ROM
. I have does somebody know how to Clone / fetch the megers to my build ...
If someone know please comment so I can release the build tomorrow
ffs what is with the //word for word// copying now
one thing to build a rom using open source code, another entirely to copy an entire thread and change some words just enough to get past your teacher's plagiarism check.
ibrokemypie said:
ffs what is with the //word for word// copying now
one thing to build a rom using open source code, another entirely to copy an entire thread and change some words just enough to get past your teacher's plagiarism check.
Click to expand...
Click to collapse
As per the request and comments on RR thread i created a seperate thread for my build... To be frank yes copying was easy and i thougt of doing ..I have not spend much time in that lol.. Anyways I have not copied your build or work mate !!!
blackpanther0582 said:
As per the request and comments on RR thread i created a seperate thread for my build... To be frank yes copying was easy and i thougt of doing ..I have not spend much time in that lol.. Anyways I have not copied your build or work mate !!!
Click to expand...
Click to collapse
just to be clear, I never said nor insinuated that you copied my build, very difficult to do that anyway as being all open source, no one is copying anyone, simply building the same source code. Just frustrating to have ones words taken and repeated without permission, attribution or even a simple acknowledgement, and its suddenly something that has happened a lot in the past few days.
Really sorry mate ...yes I have not asked permission from you I apologizing for that ... I don't know how to create a thread while looking at your thread it was really a promising one just to start with .
I was at my work time though so just spend only few mjns for that ..
Sorry once again...
If you insist I will change the entire thread
thanks for building RR I'll keep an eye on this as it develops
Working like a dream for me. Really appreciate this.
(/w Nebula 7.0.2)
Tried to add full OMS support to my yesterdays build ... But I think I am missing some steps..
Without some devs support I think I might not be able to fix it
Finally an OMS included RR nightly has been uploaded... See the main thread for download Link...
Night mode / Live display works
RR-N-v5.8.0-20161228-pme-Nightly.zip
@blackpanther0582 could you compile this kernel?
https://github.com/CyanogenMod/android_kernel_htc_msm8996/commits/cm-14.1-caf
OMS(meaning substrarum) I installed from the Play Store on the 12/24 build seems to work fine. Wifi cuts out at random is that the bug everyone talks about? It just puts am X in it and says connected but no internet.
Sent from my HTC 10 using XDA-Developers mobile app
Nosferatu. said:
OMS(meaning substrarum) I installed from the Play Store on the 12/24 build seems to work fine. Wifi cuts out at random is that the bug everyone talks about? It just puts am X in it and says connected but no internet.
Sent from my HTC 10 using XDA-Developers mobile app
Click to expand...
Click to collapse
Same here on both counts. Gonna install the 28th build to check it the wifi's fixed. That's literally the only bug i need fixed to be 100% daily driver. So awesome how fast CM/RR came all the sudden.
holofractal said:
@blackpanther0582 could you compile this kernel?
https://github.com/CyanogenMod/android_kernel_htc_msm8996/commits/cm-14.1-caf
Click to expand...
Click to collapse
Will sure try

LineageOS 17.1 - Xiaomi A2 Lite - Development Only

I have some previous experience building rom from the WIko Wax and the Huawei P8.
I run the Xiaomi A2 Lite as my daily driver, so I can't afford to test this ROM.
I do not know if this will even boot. As I said, I need you members of this forum to test this and tell me what works and the ROM's performance.
This ROM is based on LineageOS 17.1, so that is Android 10.
With a bit of luck this should work out of the box. It is here, that I should thank the pople from the Team Potato here https://forum.xda-developers.com/mi-a2-lite/development/10-0-posp-v3-q-daisy-t4011191 They are the ones who made most of the work to bring Android 10 to this device. I have just modified it a bit. Once again, props to them.
And here are the links to the different versions:
Version 0.1
No device audio
No camera
Link V0.1
Version 0.2
LED not working when charging
Fixed Camera
Fixed Audio
Link V0.2
Version 0.2.1
Fixed LED
Link V0.2.1
Version 0.3
More breaking than fixing
Wireless display fixed
Link V0.3
Version 0.5
Everything should be fixed now
OTA crashes whe nhitting install
Link V0.5
Version 0.6
Uses right microphone for camcorder
Link V0.6
Version 0.7
Fixed wireless display
Fix decoder.avc errors
Build tinymix
Build libldacBT_dec
Link V0.7
Version 0.8
Everything should work
Stable flashlight behaviour
Fixed green camera tint in low light
Link V0.8
Version 0.9
Camera switching fixed
Everything works
Working OTA
Link V0.9
Version 0.9.1
Fixed back video recording
Link V0.9.1
Version 0.9.5
Fixed flash issue
Should be bug-free
Link V0.9.5
Version 0.9.5.1
Fixes GCAM
Link V0.9.5.1
Version 1.0
Everything is stable now
New HAL1/HAL3 switch
Link V1.0
Always latest url: https://github.com/a-huk/otaserver/releases/download/09/lineage-17.1-20201115-UNOFFICIAL-daisy.zip
It is a zip, I suppose that it will be possible to flash it through TWRP, just clean flash as much as possible. I am not responsible for any harm this may do to your devices.
Again, please only post with feedback on the ROM, logcats would be useful as well or some benchmarks. I would like to make this stable and if possible official with Lineage. I know this forum is a mess, but again it is only for development. I will make propper one if this ever works. I need testers, thanks in advance. And props to the Potato Team
XDA:DevDB Information
LineageOS 17.1, ROM for the Xiaomi Mi A2 Lite
Contributors
reujea0
Source Code: https://github.com/a-huk/device_xiaomi_daisy
ROM OS Version: Android 10
Based On: LineageOS
Version Information
Status: Beta
Created 2020-04-02
Last Updated 2020-04-04
It boots, it runs great. No audio of any kind and camera (stock and GCam) not working. So far..
In any case, thanks for the rom and fast delivery.
Sorry, BT and headphones audio works for music and notifications.
celrau said:
It boots, it runs great. No audio of any kind and camera (stock and GCam) not working. So far..
In any case, thanks for the rom and fast delivery.
Sorry, BT and headphones audio works for music and notifications.
Click to expand...
Click to collapse
Thanks for the quick logcat
I will try and fix these, in the meantime, could you try this app https://play.google.com/store/apps/details?id=com.footej.camera2?
reujea0 said:
could you try this app https://play.google.com/store/apps/details?id=com.footej.camera2?
Click to expand...
Click to collapse
I tested camera with a camera app "vanilla" camera2 and it's not working..
reujea0 said:
Wew building for a wiko phone must have been a pain in the ass welp welcome in the community and good luck
~ Lacia
Click to expand...
Click to collapse
lacia-chan said:
reujea0 said:
Wew building for a wiko phone must have been a pain in the ass welp welcome in the community and good luck
~ Lacia
Click to expand...
Click to collapse
Yeah, plus that one was based off a Nvidia SOC
Click to expand...
Click to collapse
celrau said:
I tested camera with a camera app "vanilla" camera2 and it's not working..
Click to expand...
Click to collapse
Second testing version was released 0.2, see the link above
reujea0 said:
Second testing version was released 0.2, see the link above
Click to expand...
Click to collapse
heyo,
I have a few things to say:
- Your bringup is a mess
- Do your bringup on these trees https://github.com/PotatoDevices/device_xiaomi_daisy/tree/6180e3d5870834981e5f41424014047038ca235c
https://github.com/PotatoDevices/vendor_xiaomi_daisy
That will fix audio and cam
Thank you so much for your work. Imma fan of Lineage since the beginning and would prefer it over stock rom.
I dont want to be rude or anything but your bringup is quite a mess in my eyes and why is audio and **** not working for you since almost everything works fine here besides the wifi dsplay and fm radio
Click to expand...
Click to collapse
WTF!? It's for testing purposes only as OT says. Maybe u can contribute and help solving those issues?
reujea0 said:
Second testing version was released 0.2, see the link above
Click to expand...
Click to collapse
Everything I've tested works now, thanks for prompt delivery.
celrau said:
Everything I've tested works now, thanks for prompt delivery.
Click to expand...
Click to collapse
Sick, could you test some more things, like sd, calls, LTE, and run an ANTUTU benchark?
reujea0 said:
Sick, could you test some more things, like sd, calls, LTE, and run an ANTUTU benchark?
Click to expand...
Click to collapse
SD card works, calls I just tested with my other phone, LTE later since I don't have it at my current location. GPS works pretty good. I never used ANTUTU but will give it a try later.
---------- Post added at 11:34 AM ---------- Previous post was at 11:19 AM ----------
Notification/charging light not working
Cappucinto said:
Thank you so much for your work. Imma fan of Lineage since the beginning and would prefer it over stock rom.
WTF!? It's for testing purposes only as OT says. Maybe u can contribute and help solving those issues?
Click to expand...
Click to collapse
XD, I took a look at his commits and they looked like a mess and i linked him to my updated trees that have the audio and cam issue solved so next time read further into the message instead of trying to become a white knight thanks
lacia-chan said:
XD, I took a look at his commits and they looked like a mess and i linked him to my updated trees that have the audio and cam issue solved so next time read further into the message instead of trying to become a white knight thanks
Click to expand...
Click to collapse
Yeah they are a mess, getting started ?, haven't done this in a while. Yeah, this is pretty much your tree with your latest commits and some changes to convert it to a lineage tree. I also ignore neverallows to let the build finish. I will have to eventually deal with them to make it into an official build. In the meantime I plan on hosting an OTA server on my own. I am not hiding that most of this is your work, it is forked and I thank the POSP team and other devs who worked on the A2 Lite, thanks again. I just prefer LOS and there seems to be demand for it so I'm here trying to build it.
I don't think that there is a need for anyone to argue, we all have the same phone, more ROMs are always welcome and merit should be given where it is due, which I think has been done.
I will make another post in the following days, where everything is properly outlined with some more explanations.
reujea0 said:
Yeah they are a mess, getting started , haven't done this in a while. Yeah, this is pretty much your tree with your latest commits and some changes to convert it to a lineage tree. I also ignore neverallows to let the build finish. I will have to eventually deal with them to make it into an official build. In the meantime I plan on hosting an OTA server on my own. I am not hiding that most of this is your work, it is forked and I thank the POSP team and other devs who worked on the A2 Lite, thanks again. I just prefer LOS and there seems to be demand for it so I'm here trying to build it.
I don't think that there is a need for anyone to argue, we all have the same phone, more ROMs are always welcome and merit should be given where it is due, which I think has been done.
I will make another post in the following days, where everything is properly outlined with some more explanations.
Click to expand...
Click to collapse
oh no you got me wrong, Your credits were alrights its just that your source is a mess and that trees i linked have the issues like cam and audio fixed and nope more roms is not a great idea because we had a buildbot apocalypse earlier during the pie days we had like 42 roms at that point
That's awesome news @reujea0, congratulations!
LineageOS is all I need for this phone.
I'll move to this ROM as soon as it gets close to official (I use it as my daily driver).
lacia-chan said:
oh no you got me wrong, Your credits were alrights its just that your source is a mess and that trees i linked have the issues like cam and audio fixed and nope more roms is not a great idea because we had a buildbot apocalypse earlier during the pie days we had like 42 roms at that point
Click to expand...
Click to collapse
Yeah, can completely agree with this, but tbh I feel like Los is a must for any phone. I'm not saying that it is better/worse than other ROMs but anyone in the scene knows it and most of them are stable and close to AOSP.
reujea0 said:
Sick, could you test some more things, like sd, calls, LTE, and run an ANTUTU benchark?
Click to expand...
Click to collapse
LTE works fine
---------- Post added at 05:32 PM ---------- Previous post was at 05:20 PM ----------
lacia-chan said:
XD, I took a look at his commits and they looked like a mess and i linked him to my updated trees that have the audio and cam issue solved so next time read further into the message instead of trying to become a white knight thanks
Click to expand...
Click to collapse
Your intervention, well intended as you say it was should have been private, otherwise it is what it looks like.
---------- Post added at 06:26 PM ---------- Previous post was at 05:32 PM ----------
Please enable signature spoofing for MicroG
LineageOS still my favorite ROM.
Well, hope will be official soon.
EDIT : Could you please share the change log if the update is released ?
1st of all thank you so much, for starting this missing project, this afternoon i'll report more!
1. ZIP wouldnt install through TWRP (error: to Edit later) (deleted System/Data/Cache Stuff, from Android 9), so unpacked payload.bin, and flashed manually in fastboot from stock 9.
2. One permission which is needed for MicroG with Playstore (no gapps) I think something like certificate/signing spoofing is missing. (Specify later)
Besides that feels quite stable, safety net passed with opengapps/magisk, can comfirm wifi, camera, sound works. Noticed nothing wrong, will test more today, right now writing in this Rom!
Someone asked for antutu Benchmark? Could not run it, inside the tutorial the "which OS are you using" wasnt clickable, probably because off the app itself? But:
3D Mark
853 points - my A2 Lite LOS 17.1 > 56% than other A2 Lite's
(Average)

Categories

Resources