I have some previous experience building rom from the WIko Wax and the Huawei P8.
I run the Xiaomi A2 Lite as my daily driver, so I can't afford to test this ROM.
I do not know if this will even boot. As I said, I need you members of this forum to test this and tell me what works and the ROM's performance.
This ROM is based on LineageOS 17.1, so that is Android 10.
With a bit of luck this should work out of the box. It is here, that I should thank the pople from the Team Potato here https://forum.xda-developers.com/mi-a2-lite/development/10-0-posp-v3-q-daisy-t4011191 They are the ones who made most of the work to bring Android 10 to this device. I have just modified it a bit. Once again, props to them.
And here are the links to the different versions:
Version 0.1
No device audio
No camera
Link V0.1
Version 0.2
LED not working when charging
Fixed Camera
Fixed Audio
Link V0.2
Version 0.2.1
Fixed LED
Link V0.2.1
Version 0.3
More breaking than fixing
Wireless display fixed
Link V0.3
Version 0.5
Everything should be fixed now
OTA crashes whe nhitting install
Link V0.5
Version 0.6
Uses right microphone for camcorder
Link V0.6
Version 0.7
Fixed wireless display
Fix decoder.avc errors
Build tinymix
Build libldacBT_dec
Link V0.7
Version 0.8
Everything should work
Stable flashlight behaviour
Fixed green camera tint in low light
Link V0.8
Version 0.9
Camera switching fixed
Everything works
Working OTA
Link V0.9
Version 0.9.1
Fixed back video recording
Link V0.9.1
Version 0.9.5
Fixed flash issue
Should be bug-free
Link V0.9.5
Version 0.9.5.1
Fixes GCAM
Link V0.9.5.1
Version 1.0
Everything is stable now
New HAL1/HAL3 switch
Link V1.0
Always latest url: https://github.com/a-huk/otaserver/releases/download/09/lineage-17.1-20201115-UNOFFICIAL-daisy.zip
It is a zip, I suppose that it will be possible to flash it through TWRP, just clean flash as much as possible. I am not responsible for any harm this may do to your devices.
Again, please only post with feedback on the ROM, logcats would be useful as well or some benchmarks. I would like to make this stable and if possible official with Lineage. I know this forum is a mess, but again it is only for development. I will make propper one if this ever works. I need testers, thanks in advance. And props to the Potato Team
XDA:DevDB Information
LineageOS 17.1, ROM for the Xiaomi Mi A2 Lite
Contributors
reujea0
Source Code: https://github.com/a-huk/device_xiaomi_daisy
ROM OS Version: Android 10
Based On: LineageOS
Version Information
Status: Beta
Created 2020-04-02
Last Updated 2020-04-04
It boots, it runs great. No audio of any kind and camera (stock and GCam) not working. So far..
In any case, thanks for the rom and fast delivery.
Sorry, BT and headphones audio works for music and notifications.
celrau said:
It boots, it runs great. No audio of any kind and camera (stock and GCam) not working. So far..
In any case, thanks for the rom and fast delivery.
Sorry, BT and headphones audio works for music and notifications.
Click to expand...
Click to collapse
Thanks for the quick logcat
I will try and fix these, in the meantime, could you try this app https://play.google.com/store/apps/details?id=com.footej.camera2?
reujea0 said:
could you try this app https://play.google.com/store/apps/details?id=com.footej.camera2?
Click to expand...
Click to collapse
I tested camera with a camera app "vanilla" camera2 and it's not working..
reujea0 said:
Wew building for a wiko phone must have been a pain in the ass welp welcome in the community and good luck
~ Lacia
Click to expand...
Click to collapse
lacia-chan said:
reujea0 said:
Wew building for a wiko phone must have been a pain in the ass welp welcome in the community and good luck
~ Lacia
Click to expand...
Click to collapse
Yeah, plus that one was based off a Nvidia SOC
Click to expand...
Click to collapse
celrau said:
I tested camera with a camera app "vanilla" camera2 and it's not working..
Click to expand...
Click to collapse
Second testing version was released 0.2, see the link above
reujea0 said:
Second testing version was released 0.2, see the link above
Click to expand...
Click to collapse
heyo,
I have a few things to say:
- Your bringup is a mess
- Do your bringup on these trees https://github.com/PotatoDevices/device_xiaomi_daisy/tree/6180e3d5870834981e5f41424014047038ca235c
https://github.com/PotatoDevices/vendor_xiaomi_daisy
That will fix audio and cam
Thank you so much for your work. Imma fan of Lineage since the beginning and would prefer it over stock rom.
I dont want to be rude or anything but your bringup is quite a mess in my eyes and why is audio and **** not working for you since almost everything works fine here besides the wifi dsplay and fm radio
Click to expand...
Click to collapse
WTF!? It's for testing purposes only as OT says. Maybe u can contribute and help solving those issues?
reujea0 said:
Second testing version was released 0.2, see the link above
Click to expand...
Click to collapse
Everything I've tested works now, thanks for prompt delivery.
celrau said:
Everything I've tested works now, thanks for prompt delivery.
Click to expand...
Click to collapse
Sick, could you test some more things, like sd, calls, LTE, and run an ANTUTU benchark?
reujea0 said:
Sick, could you test some more things, like sd, calls, LTE, and run an ANTUTU benchark?
Click to expand...
Click to collapse
SD card works, calls I just tested with my other phone, LTE later since I don't have it at my current location. GPS works pretty good. I never used ANTUTU but will give it a try later.
---------- Post added at 11:34 AM ---------- Previous post was at 11:19 AM ----------
Notification/charging light not working
Cappucinto said:
Thank you so much for your work. Imma fan of Lineage since the beginning and would prefer it over stock rom.
WTF!? It's for testing purposes only as OT says. Maybe u can contribute and help solving those issues?
Click to expand...
Click to collapse
XD, I took a look at his commits and they looked like a mess and i linked him to my updated trees that have the audio and cam issue solved so next time read further into the message instead of trying to become a white knight thanks
lacia-chan said:
XD, I took a look at his commits and they looked like a mess and i linked him to my updated trees that have the audio and cam issue solved so next time read further into the message instead of trying to become a white knight thanks
Click to expand...
Click to collapse
Yeah they are a mess, getting started ?, haven't done this in a while. Yeah, this is pretty much your tree with your latest commits and some changes to convert it to a lineage tree. I also ignore neverallows to let the build finish. I will have to eventually deal with them to make it into an official build. In the meantime I plan on hosting an OTA server on my own. I am not hiding that most of this is your work, it is forked and I thank the POSP team and other devs who worked on the A2 Lite, thanks again. I just prefer LOS and there seems to be demand for it so I'm here trying to build it.
I don't think that there is a need for anyone to argue, we all have the same phone, more ROMs are always welcome and merit should be given where it is due, which I think has been done.
I will make another post in the following days, where everything is properly outlined with some more explanations.
reujea0 said:
Yeah they are a mess, getting started , haven't done this in a while. Yeah, this is pretty much your tree with your latest commits and some changes to convert it to a lineage tree. I also ignore neverallows to let the build finish. I will have to eventually deal with them to make it into an official build. In the meantime I plan on hosting an OTA server on my own. I am not hiding that most of this is your work, it is forked and I thank the POSP team and other devs who worked on the A2 Lite, thanks again. I just prefer LOS and there seems to be demand for it so I'm here trying to build it.
I don't think that there is a need for anyone to argue, we all have the same phone, more ROMs are always welcome and merit should be given where it is due, which I think has been done.
I will make another post in the following days, where everything is properly outlined with some more explanations.
Click to expand...
Click to collapse
oh no you got me wrong, Your credits were alrights its just that your source is a mess and that trees i linked have the issues like cam and audio fixed and nope more roms is not a great idea because we had a buildbot apocalypse earlier during the pie days we had like 42 roms at that point
That's awesome news @reujea0, congratulations!
LineageOS is all I need for this phone.
I'll move to this ROM as soon as it gets close to official (I use it as my daily driver).
lacia-chan said:
oh no you got me wrong, Your credits were alrights its just that your source is a mess and that trees i linked have the issues like cam and audio fixed and nope more roms is not a great idea because we had a buildbot apocalypse earlier during the pie days we had like 42 roms at that point
Click to expand...
Click to collapse
Yeah, can completely agree with this, but tbh I feel like Los is a must for any phone. I'm not saying that it is better/worse than other ROMs but anyone in the scene knows it and most of them are stable and close to AOSP.
reujea0 said:
Sick, could you test some more things, like sd, calls, LTE, and run an ANTUTU benchark?
Click to expand...
Click to collapse
LTE works fine
---------- Post added at 05:32 PM ---------- Previous post was at 05:20 PM ----------
lacia-chan said:
XD, I took a look at his commits and they looked like a mess and i linked him to my updated trees that have the audio and cam issue solved so next time read further into the message instead of trying to become a white knight thanks
Click to expand...
Click to collapse
Your intervention, well intended as you say it was should have been private, otherwise it is what it looks like.
---------- Post added at 06:26 PM ---------- Previous post was at 05:32 PM ----------
Please enable signature spoofing for MicroG
LineageOS still my favorite ROM.
Well, hope will be official soon.
EDIT : Could you please share the change log if the update is released ?
1st of all thank you so much, for starting this missing project, this afternoon i'll report more!
1. ZIP wouldnt install through TWRP (error: to Edit later) (deleted System/Data/Cache Stuff, from Android 9), so unpacked payload.bin, and flashed manually in fastboot from stock 9.
2. One permission which is needed for MicroG with Playstore (no gapps) I think something like certificate/signing spoofing is missing. (Specify later)
Besides that feels quite stable, safety net passed with opengapps/magisk, can comfirm wifi, camera, sound works. Noticed nothing wrong, will test more today, right now writing in this Rom!
Someone asked for antutu Benchmark? Could not run it, inside the tutorial the "which OS are you using" wasnt clickable, probably because off the app itself? But:
3D Mark
853 points - my A2 Lite LOS 17.1 > 56% than other A2 Lite's
(Average)
Related
Hi Everyone,
I've built Cyanogenmod with CM made patches to include the latest kernel from Oppo's Project Spectrum, thereby supporting the new Find 7 LCD panels. Please make backups and let your fellow Android flashaholics know your results.
This build is for LVM storage only.
Known issues:
The standard CM updater will likely break this modified rom. Please only update by flashing builds from this thread.
Sources:
Cyanogenmod Github
Patch #1
Patch #2
Wuxianlin's LVM device tree
Download:
cm-13.0-20160303-UNOFFICIAL-find7s.zip - Current
cm-13.0-20160301-UNOFFICIAL-find7.zip
THIS IS AN EXPERIMENTAL AND POTENTIALLY UNSTABLE BUILD - ALWAYS BACKUP.
I'll keep uploading builds if there's enough interest. Please post feedback below.
So you have tested them or not?
maxwen said:
So you have tested them or not?
Click to expand...
Click to collapse
My results were that Cyanogenmod booted fine, but I'm on LVM so couldn't test properly. I haven't tested Nameless out yet but will next chance I get.
Slightly unrelated - Thank you for getting OmniRom on a kernel with the new LCD support so early, you've saved my Find7 for these past few months!
Pojiku said:
My results were that Cyanogenmod booted fine, but I'm on LVM so couldn't test properly. I haven't tested Nameless out yet but will next chance I get.
Slightly unrelated - Thank you for getting OmniRom on a kernel with the new LCD support so early, you've saved my Find7 for these past few months!
Click to expand...
Click to collapse
Hi, install and boot works fine, display works fine, but not LVM supported
Anyway thanks for your work, i will wait for new build with lvm support.
Thanks :good:
Since Nameless had a few issues I don't have the time to fix, I've decided to focus on Cyanogenmod builds.
The latest CM build (2015-03-03) fixes screen gestures and switches to LVM storage.
Could you build for x9007/6?
Отправлено с моего Find7 через Tapatalk
Pojiku said:
Since Nameless had a few issues I don't have the time to fix, I've decided to focus on Cyanogenmod builds.
The latest CM build (2015-03-03) fixes screen gestures and switches to LVM storage.
Click to expand...
Click to collapse
Yeah it works! I have found only a serious bug: i have no sounds of any kind: no music, notifications, etc.
Everything else works or seems to works fine: 4g, wifi, calls, everything.
Thanks so much for the rom, long time waiting for this.
Pojiku said:
Slightly unrelated - Thank you for getting OmniRom on a kernel with the new LCD support so early, you've saved my Find7 for these past few months!
Click to expand...
Click to collapse
You are welcome - if you have any more questions just contact me
I've flashed this rom and from my experience, the only real bug that is here is the fact that sound does not work at all unless using headphones. Could you by any chance port MaxxAudio from the original ColorOS onto this or the Camera?
Pojiku said:
...I'll keep uploading builds if there's enough interest. Please post feedback below.
Click to expand...
Click to collapse
Hi Pojiku.
Good job man. Don't wait if there wiil be interest to upload builds. Go my friend because i'm sure many find 7's owners are waiting for this impatiently in particular those who own a find 7 with new lcd panel like me. I m on omni, it s a very good rom with a very good dev. Today due to an incompatibility, i m forced to stay on an old omni build and cannot update. So i think that your rom could be a solution for me. I will wait a new build fixing the sound issue and be sure i will flash your rom to test it.
Thank you for your invest and your time.
Good luck.
---------- Post added at 05:54 AM ---------- Previous post was at 05:47 AM ----------
Thank you for getting OmniRom on a kernel with the new LCD support so early, you've saved my Find7 for these past few months!
Click to expand...
Click to collapse
that goes for me too. Without maxwen I'll still be on color os or spectrum both of which are bugged.
Thanks Max
Hi Pojiku
I ve tried the lastest build and i m vey exciting. Please continue your work and release a new build to fix the sound issue.
Can't wait lol.
Due to lack of Clear Kernel Source, this thread is in violation of GPL License as well as XDA Rules. Hence it is closed.
OP Check your PM and respond in order to get it reopened.
CyanogenMod 12.1 (Unofficial)
STATUS: Abandoned.
Features:
Odexed, quicker first boot
March security update
Archived Downloads
Sources
Well.Another CM 12.1 rom
---------- Post added at 12:22 PM ---------- Previous post was at 12:15 PM ----------
Wait.GPS is fixed?
ChristopherXI said:
Well.Another CM 12.1 rom
---------- Post added at 12:22 PM ---------- Previous post was at 12:15 PM ----------
Wait.GPS is fixed?
Click to expand...
Click to collapse
GPS is yet a bug of any non-stock-based ROM.
Finally the test build i was waiting for
Cant try tho ZF5 Is daily driver need it always.
Hope the boot.img can be signed.... i don't need to unlocking bootloader to install this rom.
arraiyan123 said:
Hope the boot.img can be signed.... i don't need to unlocking bootloader to install this rom.
Click to expand...
Click to collapse
Well I think it's not possible.Only Asus could do that. They really need to learn lesson from Sony. Build 2 seperate roms. One is their ZenUI, the other one could be AOSP. But they are not smart enough to think that their rom is full of BLOATWARE ****
This CM is going to be pure? Most of the custom ROM comes with ASUS Apps and sempe has removed these Apps
ChristopherXI said:
Well I think it's not possible.Only Asus could do that. They really need to learn lesson from Sony. Build 2 seperate roms. One is their ZenUI, the other one could be AOSP. But they are not smart enough to think that their rom is full of BLOATWARE ****
Click to expand...
Click to collapse
True that.
Kyo. said:
This CM is going to be pure? Most of the custom ROM comes with ASUS Apps and sempe has removed these Apps
Click to expand...
Click to collapse
Yes, it will be pure and will only include few Intel apps for thermal/fw management. All the rest will be from CM. Im also removing CMUpdater because there is no reason to keep it.
@dgadelha
Is this kernel compatible with your CZ cuz I would like the under clocked kernel.
rkj911 said:
@dgadelha
Is this kernel compatible with your CZ cuz I would like the under clocked kernel.
Click to expand...
Click to collapse
It should be, althought I haven't tested it on CyanoZenMod.
You can try it.
P.S.: don't forget, after flashing,
Code:
fastboot erase cache
rkj911 said:
@dgadelha
Is this kernel compatible with your CZ cuz I would like the under clocked kernel.
Click to expand...
Click to collapse
Look at the 'Features' part of the post
ChristopherXI said:
Look at the 'Features' part of the post
Click to expand...
Click to collapse
Am asking for a different ROM which he made with stock kernel so am asking to use this kernel, I know its under clocked i have read the thread.
New Nightly Release - 20160305
Updated Known Issues:
Random screen locking - FIXED 20160305
Delay on video decoding - FIXED 20160305
Random screen wake-ups - FIXED 20160305
No Vibration - No ETA
Dead MPEG Video Decoder - As of 20160305 (PLANNED)
No Baseband (RIL, Telephony) - As of 20160305 (TO BE FIXED)
Progress on gpsd, but not working yet (devs: the socket is now created, but the IPC connection fails. I think it's because of SELinux) - No ETA - As of 20160305
Downloads
dgadelha said:
New Nightly Release - 20160305
Updated Known Issues:
Random screen locking - FIXED 20160305
Delay on video decoding - FIXED 20160305
Random screen wake-ups - FIXED 20160305
No Vibration - No ETA
Dead MPEG Video Decoder - As of 20160305 (PLANNED)
No Baseband (RIL, Telephony) - As of 20160305 (TO BE FIXED)
Progress on gpsd, but not working yet (devs: the socket is now created, but the IPC connection fails. I think it's because of SELinux) - No ETA - As of 20160305
UPLOAD IN PROGRESS
Click to expand...
Click to collapse
nice , i downloading sources
ChristopherXI said:
Well I think it's not possible.Only Asus could do that. They really need to learn lesson from Sony. Build 2 seperate roms. One is their ZenUI, the other one could be AOSP. But they are not smart enough to think that their rom is full of BLOATWARE ****
Click to expand...
Click to collapse
Asus should give stable firmwares updated and with all possible features, also must provide the sources of it(only if based on open source), if you dont want their software then you should find how to use something else or make your own, and THIS WAS THE ONLY OBJECTIVE ON XDA back in the day.
Also your comment about sony isnt totally true, as you make it sound great but dont tell about the fact that they support no more than 3 or 4 devices and usually stop supporting devices without even talking about it first. I know well about this because i had 2 xpedia devices and dealt with this issue before.
Now, focus on whats important, this offtopic subject only bloat the thread and make noobs think its true because they dont have experience about it.
And now i hope this answer i gave ends this useless subject.
Enviado de meu ASUS_T00J usando Tapatalk
guidoido004 said:
Asus should give stable firmwares updated and with all possible features, also must provide the sources of it(only if based on open source), if you dont want their software then you should find how to use something else or make your own, and THIS WAS THE ONLY OBJECTIVE ON XDA back in the day.
Also your comment about sony isnt totally true, as you make it sound great but dont tell about the fact that they support no more than 3 or 4 devices and usually stop supporting devices without even talking about it first. I know well about this because i had 2 xpedia devices and dealt with this issue before.
Now, focus on whats important, this offtopic subject only bloat the thread and make noobs think its true because they dont have experience about it.
And now i hope this answer i gave ends this useless subject.
Enviado de meu ASUS_T00J usando Tapatalk
Click to expand...
Click to collapse
I know about this. And I don't make the reply sound great. Is the truth. Since the lollipop update. The zenfone 5 is buggy as fu**
The system does not see the SIM card
Esk1mOo said:
The system does not see the SIM card
Click to expand...
Click to collapse
I will try to fix it in next release
What is gpsd? GPS?
ChristopherXI said:
What is gpsd? GPS?
Click to expand...
Click to collapse
i think yes
Code:
*** Disclaimer***
No legal responsibility taken for anything.
use at own risk.
I am not a Developer . Just sharing the RR project with updates and mergers faster for users
Install with full knowledge that this might make your phone 100% unusable and will void your device warranty .
Briefing
This is my own personal RR N build, based on 14.1. i will build the ROM ASAP once crpalmer merges any new codes .
I will upload the ROM if it Boots fine in my personal device
i am not offending anybody's build especially the Official RR thread . i just keep this thread updated daily .
please dont complain anything about the BUGS as all bugs in CM14.1 are present in my build too
Feel free to contribute, recommendations and (new) bug reports are always very welcome.
I am a newbee here if any mistakes please let me know
Click to expand...
Click to collapse
Features & Details
FULL Substratum theme engine support with Masquerade and OMS
Compatible fully with both firmware (MM and N)
SELinux ENFORCING
Build USING Ubuntu 16.04 in Windows using VM
Click to expand...
Click to collapse
INSTRUCTIONS
Download the Rom & and ARM64 7.1 GAPPS .
Reboot to TWRP recovery .
Flash ROM and then GAPPS
Flash Custom Kernel ( Personal recomendation i am using V7.0.2-Beta Android N )
If running Nougat firmware (2.0+) you will need to flash fingerprint patch to use the home button
Click to expand...
Click to collapse
BUGS
Same as CM 14.1 ... i am not listing the bugs
ChangeLog
Add headphones backend (fixes headphones)
WIFI fix ( may be check it out yourself)
Developer settings fixed
USB tethering fixed ( working for me)
Night mode working
Bug fixes
VOIP application issue fixed when it comes for audio
Added Aptx Bluetooth Support
[*] Touch Screen Gestures added
Note :- please dont ask for BUG fixes FYI i am not a developer ... solutions and recommendations are welcome
Downloads
RR-N-v5.8.2-20170319-pme-Nightly.zip
Finally an OMS build .... No help got from any of the devs out here in XDA ... Finally managed to get the OMS in my build.
Thanks a lot to my best mate who helped me in guiding on github and gerrits ++ thanks @ mihran
GAPPS:-
Optional
substratum theme engine
XDAevDB Information
Resurrection Remix ROM N UNOFFICIAL for the HTC 10
Contributors crpalmer
Version Information
Status: Beta
Created 26.12.2016
Source Code Rom
https://github.com/vysakhraju/platform_manifest
Original Rom thread by @Eliminater
=[url]http://forum.xda-developers.com/htc-10/development/rom-resurrection-remix-m-t3440977[/URL]
Thanks alot!
Where is FP patch?
ali nz said:
Thanks alot!
Where is FP patch?
Click to expand...
Click to collapse
As i have not got the permission to use the finger print patch please use the one from CM14.1 thread by @ibrokemypie
@ibrokemypie :- Can i use your finger print patch for my ROM ?
Dec 26th Build with OMS updated in OP
OP I'm on your last build of RR unofficial from 12.22 from the other thread.
do you require or recommend a clean flash for this or can it flash dirty? thank you!
VR32 said:
OP I'm on your last build of RR unofficial from 12.22 from the other thread.
do you require or recommend a clean flash for this or can it flash dirty? thank you!
Click to expand...
Click to collapse
I did dirty flash and is wokring fine
thanks man I'll give it a go
Hi All
Need your support to add OMS support to this ROM
. I have does somebody know how to Clone / fetch the megers to my build ...
If someone know please comment so I can release the build tomorrow
ffs what is with the //word for word// copying now
one thing to build a rom using open source code, another entirely to copy an entire thread and change some words just enough to get past your teacher's plagiarism check.
ibrokemypie said:
ffs what is with the //word for word// copying now
one thing to build a rom using open source code, another entirely to copy an entire thread and change some words just enough to get past your teacher's plagiarism check.
Click to expand...
Click to collapse
As per the request and comments on RR thread i created a seperate thread for my build... To be frank yes copying was easy and i thougt of doing ..I have not spend much time in that lol.. Anyways I have not copied your build or work mate !!!
blackpanther0582 said:
As per the request and comments on RR thread i created a seperate thread for my build... To be frank yes copying was easy and i thougt of doing ..I have not spend much time in that lol.. Anyways I have not copied your build or work mate !!!
Click to expand...
Click to collapse
just to be clear, I never said nor insinuated that you copied my build, very difficult to do that anyway as being all open source, no one is copying anyone, simply building the same source code. Just frustrating to have ones words taken and repeated without permission, attribution or even a simple acknowledgement, and its suddenly something that has happened a lot in the past few days.
Really sorry mate ...yes I have not asked permission from you I apologizing for that ... I don't know how to create a thread while looking at your thread it was really a promising one just to start with .
I was at my work time though so just spend only few mjns for that ..
Sorry once again...
If you insist I will change the entire thread
thanks for building RR I'll keep an eye on this as it develops
Working like a dream for me. Really appreciate this.
(/w Nebula 7.0.2)
Tried to add full OMS support to my yesterdays build ... But I think I am missing some steps..
Without some devs support I think I might not be able to fix it
Finally an OMS included RR nightly has been uploaded... See the main thread for download Link...
Night mode / Live display works
RR-N-v5.8.0-20161228-pme-Nightly.zip
@blackpanther0582 could you compile this kernel?
https://github.com/CyanogenMod/android_kernel_htc_msm8996/commits/cm-14.1-caf
OMS(meaning substrarum) I installed from the Play Store on the 12/24 build seems to work fine. Wifi cuts out at random is that the bug everyone talks about? It just puts am X in it and says connected but no internet.
Sent from my HTC 10 using XDA-Developers mobile app
Nosferatu. said:
OMS(meaning substrarum) I installed from the Play Store on the 12/24 build seems to work fine. Wifi cuts out at random is that the bug everyone talks about? It just puts am X in it and says connected but no internet.
Sent from my HTC 10 using XDA-Developers mobile app
Click to expand...
Click to collapse
Same here on both counts. Gonna install the 28th build to check it the wifi's fixed. That's literally the only bug i need fixed to be 100% daily driver. So awesome how fast CM/RR came all the sudden.
holofractal said:
@blackpanther0582 could you compile this kernel?
https://github.com/CyanogenMod/android_kernel_htc_msm8996/commits/cm-14.1-caf
Click to expand...
Click to collapse
Will sure try
Hello everyone,
the question and disscussion is:
Do we get Lineage OS support in the Future? it does not matter if unofficial or official, but what do you think?
I saw the LeEco le Max 2 get some unofficial support, so it could be that some Devs will try it.
It would be awesome *_*
I think the problem is, that the community isn't that big like for the le Max 2, but maybe it will get bigger in the future.
What do you think? :good:
I'm running my own custom image of LineageOS 13.0. All is working as expected, but I don't have time to clean all the stuff to share it with public. I uploaded my sources that works in https://www.github.com/corvusmod, so if someone wants to build it, feel free
For L14 version, camera is not working already and will not work until Leeco release N for Pro3
I think, it's not discussion, but it is a question. So, it should be in "QUESTIONS & ANSWERS". Le Max 2 have bigger community, because this phone is cheaper and cheapest Le Max 2 was for 180-200$. This mobile is older. Our Le Pro 3 have few months and in future it could have more community and ROMs like this.
corvus said:
I'm running my own custom image of LineageOS 13.0. All is working as expected, but I don't have time to clean all the stuff to share it with public. I uploaded my sources that works in https://www.github.com/corvusmod, so if someone wants to build it, feel free
For L14 version, camera is not working already and will not work until Leeco release N for Pro3
Click to expand...
Click to collapse
Wooow! Someone interested?
It would be awesome!
:fingers-crossed:
Who could we talk to in order to get official support?
I dont know, but to get official support there should be at first a stable unofficial lineage OS Version. I do not know much about creating ROMs but i hope someone does and will create a masterpiece for le pro 3
I hope so
I can continue cleaning of the LOS13. I have quite a bit of free time and want to get started on a project. If corvus doesn't mind, I'll make a thread on my progress and, eventually, some stable builds.
corvus said:
I'm running my own custom image of LineageOS 13.0. All is working as expected, but I don't have time to clean all the stuff to share it with public. I uploaded my sources that works in https://www.github.com/corvusmod, so if someone wants to build it, feel free
For L14 version, camera is not working already and will not work until Leeco release N for Pro3
Click to expand...
Click to collapse
Hi Corvus,
I've been trying to build slim from the repo you forked, but it keeps telling me I have no recovery, and ends up erroring out. I tried on ubuntu 16.04 lts though, could be my issue. Gonna try your lineage 13 version.
jts2111 said:
I can continue cleaning of the LOS13. I have quite a bit of free time and want to get started on a project. If corvus doesn't mind, I'll make a thread on my progress and, eventually, some stable builds.
Click to expand...
Click to collapse
Would be awesome. I will try your build!
Good project looking forward to
manuelbvb said:
Would be awesome. I will try your build!
Good project looking forward to
Click to expand...
Click to collapse
I'll edit a link to the thread I make with to-dos based off the source code I can see.
Here's where I'll post progress!: https://forum.xda-developers.com/le-pro3/development/progress-lineage-os-13-t3546126
jts2111 said:
I can continue cleaning of the LOS13. I have quite a bit of free time and want to get started on a project. If corvus doesn't mind, I'll make a thread on my progress and, eventually, some stable builds.
Click to expand...
Click to collapse
Hi @jts2111,
No problem from my side. TS team shared with me the sources, I modified them for Lineage, and try to do some tweaks (already uploades) and have some more in local, but causes some problems, so I didn't upload them.
With this image I get more than 3 days of batt time and a sot of 8 hours, so it's good for me. My only concern is that I was not able to make Camera2 HAL working to get manual settings. But I have little time to test, so any help from this side is welcome.
Only one thing, please, share the code in a public repo so TS, me or any other developer can see it and work together.
Thanks
---------- Post added at 10:35 PM ---------- Previous post was at 10:32 PM ----------
jts2111 said:
I can continue cleaning of the LOS13. I have quite a bit of free time and want to get started on a project. If corvus doesn't mind, I'll make a thread on my progress and, eventually, some stable builds.
Click to expand...
Click to collapse
robertzas said:
Hi Corvus,
I've been trying to build slim from the repo you forked, but it keeps telling me I have no recovery, and ends up erroring out. I tried on ubuntu 16.04 lts though, could be my issue. Gonna try your lineage 13 version.
Click to expand...
Click to collapse
For Slim, please use the fork from where I get the code. See it in github. It's TS source, so it should work.
corvus said:
Hi @jts2111,
No problem from my side. TS team shared with me the sources, I modified them for Lineage, and try to do some tweaks (already uploades) and have some more in local, but causes some problems, so I didn't upload them.
With this image I get more than 3 days of batt time and a sot of 8 hours, so it's good for me. My only concern is that I was not able to make Camera2 HAL working to get manual settings. But I have little time to test, so any help from this side is welcome.
Only one thing, please, share the code in a public repo so TS, me or any other developer can see it and work together.
Thanks
Click to expand...
Click to collapse
I forked your repo and shared it in my post. I'll work on what you mentioned. One of my top (long term) goals is complete CTS compatibility. With safetynet passed, there'd be nothing that would really pull you back to stock.
Definitely, I'm preparing the Kernel code after code to ensure we get a very clean and functional Kernel for the future, instead of just merging the one from LeEco with more than 80% of unneeded bits due to their other devices being at the same place (shameful).
This will get a ~30MB Kernel reduced to around 12MB and thus make custom ROMs perform a lot better and boot immensely faster after all.
I'd only need one sense of common attitude which is asking LeTV to keep the Kernel source up-to-date when they launch OTAs as well, I've seen some comments regarding their image stabilization fix at latest release (OTA) which is only possible at Kernel/blob level and thus if we want to have this feature working (at least partially) we need the source code "right off the bat" to get those fixes. Please, make pressure on their forums for 5.9 x720 Kernel source code and for nougat preview builds, I'd appreciate to even help with their own EUI for that matter, I'll see if I can get in touch with them concerning those points.
Do we have someone from China or someone with experience with Chinese so we can attach our discussions there?
I do hope they keep the open source up to date, but it seems they are doing the bare minimum to apply to Google's open source policy. I'm in the US, so I have the x727 with 1 SIM. We would need someone to test with a x720 as well.
@GalaticStryder, Leeco only will post the sources needed to avoid license problems with GPL, so dont wait much help from them. But we can ask...
@jts2111, I have a 720, so I can test your builds.
@jts2111
I received my X720 this week and I could also test your experimental build.
It would be nice to already start with a LineageOS custom ROM as first ROM to avoid a lot of reinstallation / reconfiguration of apps with other kind of custom ROMs.
This is a port of Jolla's Sailfish OS for h815.
Standard disclaimer applies:
I take no responsibility if anything happens to your phone, if your alarm doesn't work or if it reboots when you call emergency numbers. Flash at your own risk.
Don't flash this if you need a fully working phone.
Beta? 1.1
What works:
Wifi, 4G/LTE, sound, calls, vibration, SMS, Jolla Store, GPS, accelerometer,
What doesn't:
Camera, bluetooth, stock browser (use web pirate), wifi passwords need to be entered after a reboot, some video playback crashes (can be fixed by using software decoding, for example gstreamer10-libav on openrepos)
Possibly more, please report any issues
Install instructions:
Make sure you have a backup of anything you don't want to lose, preferably not on the device
Full wipe (might work without)
Flash LineageOS 14.1
Flash sailfishos-h815
Ignore any "no system installed" warnings from TWRP
Please note that this is not an Android ROM. Your Android apps will not work until someone gets sfdroid working.
Thanks to:
The friendly guys at #sailfishos-porters for helping me out a lot
Jolla for developing Sailfish OS
Download links: a few posts below
XDA:DevDB Information
[H815] Sailfish OS port, ROM for the LG G4
Contributors
kamnxt
ROM OS Version: 7.x Nougat
Based On: Sailfish OS
Version Information
Status: Beta
Current Beta Version: 11.02.18
Beta Release Date: 2018-02-11
Created 2017-07-29
Last Updated 2018-02-12
Downloads:
LineageOS 14.1:
I'm using the version from here right now:
https://www.lineageoslog.com/14.1/h815#201711070000
Sailfish OS: Latest here: https://androidfilehost.com/?w=files&flid=202570
All versions here: https://androidfilehost.com/?w=files&flid=202568
My sources:
https://github.com/kamnxt/droid-hal-h815
https://github.com/kamnxt/hybris-boot
https://github.com/kamnxt/android_kernel_lge_msm8992
Will try to upload everything soon
Changelog:
alpha 1 - 29.07.2017:
Initial release
Would be nice for someone to test. Also, formatting needs sorted for this first post along with source code links etc
OP, just make few 'reserved' posts, you need to have 10 posts to post a link
Sent from my LG-H815 using Tapatalk
Kye2000 said:
Would be nice for someone to test. Also, formatting needs sorted for this first post along with source code links etc
Click to expand...
Click to collapse
Minto107 said:
OP, just make few 'reserved' posts, you need to have 10 posts to post a link
Sent from my LG-H815 using Tapatalk
Click to expand...
Click to collapse
Done, will post links now
kamnxt said:
Done, will post links now
Click to expand...
Click to collapse
i flashed now but i am stuck here
gentr said:
i flashed now but i am stuck here
Click to expand...
Click to collapse
That's a part of the tutorial. If it doesn't work properly, you can try to skip it by tapping the corners of the screen from top left clockwise.
kamnxt said:
That's a part of the tutorial. If it doesn't work properly, you can try to skip it by tapping the corners of the screen from top left clockwise.
Click to expand...
Click to collapse
It's easy os system and very attractive to use them, hope for the new update very soon.
Great news!
When camera and browser will start working I'll try the port, till then... it's too much alpha for me
Thanks for the port!
Laghie said:
Great news!
When camera and browser will start working I'll try the port, till then... it's too much alpha for me
Thanks for the port!
Click to expand...
Click to collapse
You can use an unofficial browser like Webcat instead. Camera doesn't work yet though. I'll try to release a version with qtscenegraph-adaptation fixed soon (fixes black images).
Hello! Are you still working on this?
Laghie said:
Hello! Are you still working on this?
Click to expand...
Click to collapse
Hey! I've been kind of busy lately, but I was thinking about updating it recently. I can try to compile a new version if you want (hopefully including a fix for the pink screen issue).
That would be nice. Also a little status update is Glas
Thanks! But take your time, life's more important that alpha testing
BTW, is it possible to dual boot android and sailfish?
Laghie said:
Thanks! But take your time, life's more important that alpha testing
BTW, is it possible to dual boot android and sailfish?
Click to expand...
Click to collapse
You can dualboot by modifying fstab in the kernel and recovery to point the /data and /system to sdcard.
But you need quick sdcard to not be totally unusable.
Status update time!
I'm setting up the build environment on my new laptop (it's been a while since I last messed around with SFOS...) New version should be coming soon™ (hopefully within a few days). Trying to build with a newer version of LineageOS as well, so we'll see if that works.
Yes please. Would love to see this working. There isn't enough new stuff out there for the G4 and this would be awesome.
#ApolloLiteProblems said:
Yes please. Would love to see this working. There isn't enough new stuff out there for the G4 and this would be awesome.
Click to expand...
Click to collapse
Seems like I lost some of the files from the last time I got things working... I need to find out how I got sound working, since now it no longer works... I'll see if I can get it working again.
Awesome.