Related
Well, today was a say day for me, for I dropped my HOX on some concrete and shattered the glass, phone still works and lcd isn't damaged... but I was wondering if theres anyone here who knows a decent repair centers in the UK, i've seen this http://compare.ebay.co.uk/like/2511...ixedPriceItemTypes&var=sbar&adtype=pla&crdt=0 and i'm pretty sure thats all I need... I could even try myself
Perhsps HTC can sell us an original part, we could also ask for s one x+ battery. I don't know how much the one x digitisee and glass replacement would cost. The whole svren inc LCD is 160 IIRC so probably less than 100?
I also.have a damaged screen. My concern is whether the. Parts are really originals as claimed, be cause I'd like a real gorilla glass panel. Also, how do I reconnect the connectors I have to unplug to get the screen . Presumably it's obvious otherwise it would have been mentioned in repair guides.
HTC may repair and sell originals, how much for I don't know.
My LCD appears fine usually, but sometimes there is a yellow tint to some of the screen, presumably related to epoxy glue. Also I was pressing down on the Screen and now one of the cracks appear slightly blue Around the edges, not sure if this will change if I replace.
Finally I saw a story on xdA I think of a guy who Bricked his while trying to replace the screen.
CraigUK87 said:
Well, today was a say day for me, for I dropped my HOX on some concrete and shattered the glass, phone still works and lcd isn't damaged... but I was wondering if theres anyone here who knows a decent repair centers in the UK, i've seen this http://compare.ebay.co.uk/like/2511...ixedPriceItemTypes&var=sbar&adtype=pla&crdt=0 and i'm pretty sure thats all I need... I could even try myself
Click to expand...
Click to collapse
From what I have seen in One X screen replacement videos and read in this and other forums the digitizer is not easily separable from the LCD. So most probably you'll have to replace the whole display assembly (i.e digitizer + LCD screen).
Nope
None of the replacement parts in this thread so far are close to genuine, and will be cheap crap.
http://www.ebay.co.uk/itm/320929331645?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
This is what a genuine replacement looks like, and costs. If it's under £100, forget it; it's crap. If it comes as separate parts, it's crap. The One X screen is bonded at the factory across the entire area of the screen - you will never get a good screen if you assemble it yourself, or even if a repair centre does it. You'll get an air gap between the LCD and digitizer, and therefore it will look awful in daylight.
Dave Trouser said:
None of the replacement parts in this thread so far are close to genuine, and will be cheap crap.
http://www.ebay.co.uk/itm/320929331645?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
This is what a genuine replacement looks like, and costs. If it's under £100, forget it; it's crap. If it comes as separate parts, it's crap. The One X screen is bonded at the factory across the entire area of the screen - you will never get a good screen if you assemble it yourself, or even if a repair centre does it. You'll get an air gap between the LCD and digitizer, and therefore it will look awful in daylight.
Click to expand...
Click to collapse
What about this? http://www.ebay.co.uk/itm/REPLACEME...A%2BFICS%2BUFI&otn=21&pmod=251138091338&ps=54
BUMP
So is there anyone here can lend me a hand... I'm from the UK and i need to get my LCD replaced... does anyone know of any legit repair centers... Please.. i'm pretty desperate now
CraigUK87 said:
So is there anyone here can lend me a hand... I'm from the UK and i need to get my LCD replaced... does anyone know of any legit repair centers... Please.. i'm pretty desperate now
Click to expand...
Click to collapse
Call up HTC. I've done some research, seems to agree with what is posted above.
I feel your pain.. I have a small crack on the side of my S3 screen. How bad is it? If its smalland on the side check out an overlay Luke by Spectre. They are about 4mm thick and are cut to cover the whole face of the screen
Sent from my EndeavorU using Xparent ICS Tapatalk 2
Ebay start selling red and black back cover plate and just wonder if anyone know how to?
Hi
randy_c said:
Ebay start selling red and black back cover plate and just wonder if anyone know how to?
Click to expand...
Click to collapse
Yeah i bought red one. but you can't do it without a new LCD screen maybe. . My current one is black... changed the battery part once. but still don't know how to change the housing... i hope someone can teach us..
armedzerox said:
Yeah i bought red one. but you can't do it without a new LCD screen maybe. . My current one is black... changed the battery part once. but still don't know how to change the housing... i hope someone can teach us..
Click to expand...
Click to collapse
Well, let me try... If you changed the battery, you already know how to replace the backplate, so it shouldn't be a problem. If you want to replace the midframe/housing, that's quite a bit more work, but still doable, if you are comfortable working with heat gun or hair dryer. I would strongly recommend watching some YouTube videos on the subject (phone model doesn't matter; you just need to understand how to work with a heat gun and a suction cup). Also, finding a good disassembly guide for ZL would be useful, to make sure you follow the teardown steps properly.
Note that I personally haven't done a full ZL disassembly, but I know how it's put together, and I have done similar repairs on multiple other phones, including Xperia Z, Z1, LG G2, Galaxy S2 and others. Basically, you need to remove the backplate, then disconnect everything and remove all components accessible from the back, making sure not to damage ribbon cables in the process (some of them are very delicate). This is where a good disassembly guide comes in very handy. After that, you are left with the most difficult task: removing the display/digitizer assembly without damaging it. You need to carefully (that's the keyword here!) heat it up around the perimeter to loosen up the adhesive, and carefully pull it from the housing with a suction cup, working your way around the edge with a plastic spudger, or a guitar pick, or a similar tool. At this stage, you can quite easily break the glass, or split the LCD/digitizer "sandwich", so, again, be careful!
If you have no experience whatsoever doing this, your screen's chances of survival are quite slim. I am pretty handy with electronics and with stuff in general, and literally spent years with soldering iron in my hands. Still, my first two attempts were fudged up (the screen was already damaged in both cases, so no harm done, but lessons learned). First time, I fried the display with a heat gun. Second time, cracked the glass trying to separate it from the housing. That was enough for me to learn the tricks. So, be prepared to replace the screen, if you break it. But hey, you may very well get lucky, and do it right the first time around...
Assuming you are through the disassembly process, you will then need to put the phone back together in your new housing, using two adhesive gaskets: one for the display, and another for the backplate. I would recommend buying the proper pre-cut adhesive for your phone (check out Amazon or eBay), but you can also use a narrow high-quality double-sided tape (3M or similar), manually cut in place.
Good luck!
Tried googling up but it seemed that there are no guide for changing the housing for xperia zl.
But oh well, maybe I need to buy the lcd screen just in case I failed. But thanks! That'll boost my spirit up to do it
Joined the club this morning unfortunately. My touch screen still works, so like many, I just have to replace the front part.
I've read this thread almost in its entirety, but nobody mentions having any success. Has anybody tried replacing the screen themselves? Does anybody know if you can use a blowdryer instead of a heat gun?
Also, where are most people buying replacements? I see the one from China, but I'm a little wary of those so considering this: forum.xda-developers.com/showthread.php?t=2617614
I've replaced laptop and mobile screens in the past (back in the HTC 8525 days), but not sure if this is out of skill-set. Would really appreciate some input.
scopefield said:
Joined the club this morning unfortunately. My touch screen still works, so like many, I just have to replace the front part.
I've read this thread almost in its entirety, but nobody mentions having any success. Has anybody tried replacing the screen themselves? Does anybody know if you can use a blowdryer instead of a heat gun?
Also, where are most people buying replacements? I see the one from China, but I'm a little wary of those so considering this: forum.xda-developers.com/showthread.php?t=2617614
I've replaced laptop and mobile screens in the past (back in the HTC 8525 days), but not sure if this is out of skill-set. Would really appreciate some input.
Click to expand...
Click to collapse
There is a video guide on youtube on disassembling the tablet and replacing the front panel. Its by LE55ONS I think is the uploader .Check it out.
filchi756 said:
There is a video guide on youtube on disassembling the tablet and replacing the front panel. Its by LE55ONS I think is the uploader .Check it out.
Click to expand...
Click to collapse
His seems to be for the regular 10.1, not 2014. Same process?
Edit: Realized I foolishly posted in the wrong board. Reported the post.
scopefield said:
His seems to be for the regular 10.1, not 2014. Same process?
Edit: Realized I foolishly posted in the wrong board. Reported the post.
Click to expand...
Click to collapse
I recommend you should not try to do this yourself but instead send it to a prof.service. you could find them on Ebay. You should only do it yourself if you replace the whole screen assembly.
buhohitr said:
I recommend you should not try to do this yourself but instead send it to a prof.service. you could find them on Ebay. You should only do it yourself if you replace the whole screen assembly.
Click to expand...
Click to collapse
How hard is it? I bought the screen for 40 on eBay (US) and am close to buying the materials (heat gun, replacement kits, pry, etc.) I've seen some tutorials on YouTube and just seems to take some patience and perseverance?
scopefield said:
How hard is it? I bought the screen for 40 on eBay (US) and am close to buying the materials (heat gun, replacement kits, pry, etc.) I've seen some tutorials on YouTube and just seems to take some patience and perseverance?
Click to expand...
Click to collapse
Someone did replaced the digitizer and the screen didnt worked. So good luck.
I also did cracked mine screen, but I took it to service repair and costed me 285US.
Only positive, is the new replacement screen doesnt have backlight bleeding like mine old one had and was very annoying as hell.
This is first ever big LCD screen that doesnt have any backlight bleeding of all i owned.
dt33 said:
Someone did replaced the digitizer and the screen didnt worked. So good luck.
I also did cracked mine screen, but I took it to service repair and costed me 285US.
Only positive, is the new replacement screen doesnt have backlight bleeding like mine old one had and was very annoying as hell.
This is first ever big LCD screen that doesnt have any backlight bleeding of all i owned.
Click to expand...
Click to collapse
That's way out of my range unfortunately. What are these repair people doing that we can't do?
Any other last thoughts? Should be getting my replacement screen this week.
scopefield said:
Any other last thoughts? Should be getting my replacement screen this week.
Click to expand...
Click to collapse
If you don't know I tell you, the screen is glued to the digitizer with UV glue and you need a special glue machine to do that. Any other methods like tape, glue strings, glue kits ...what ever, will not work the same way, air and dirt will get in between and you will see mark and bubble all over the screen in the long run, plus the touch/Spen may not even work right any more...So good luck. It's may cost you more but, if you went through all the headache and at the end you still have to buy an assembly...mute point and even cost you more...
scopefield said:
That's way out of my range unfortunately. What are these repair people doing that we can't do?
Click to expand...
Click to collapse
They dont change the digitizer only and whole LCD+digitizer frame. None of repair service would change just the digitizer, too much work and very difficult to do it.
Repair cost only 50US and lcd+digitizer frame cost 235US. Looking around the web, its cost around 210SUS LCD + digitizer frame.
After I read that someone failed to replace only the digitizer, since they are glued together and decided take it to repair service instead.
Hello
Where may I a replacing screen for my Le Max 2? It has just fallen on the floor and is broken even though the touch screen is still working
thanks
Hope this helps. Check the store feedback before buying.
http://www.aliexpress.com/wholesale...030452&SearchText=le+max+2+replacement+screen
Good to know it can be done and there are spare parts around.
Always thought it was fatal with these newer "design over everything" phones.
neo299 said:
Hope think is helps. Check the store feedback before buying.
http://www.aliexpress.com/wholesale...030452&SearchText=le+max+2+replacement+screen
Click to expand...
Click to collapse
Thx for your reply. Can you say which lcd screen is made by LeTV or is there an LCD screen which is made by LeTV? Thx
I don't know. Perhaps someone else on the forum has that information. I think they sell original screens but it's best you contact the sellers directly before ordering.
lcarrere said:
Hello
Where may I a replacing screen for my Le Max 2? It has just fallen on the floor and is broken even though the touch screen is still working
thanks
Click to expand...
Click to collapse
Try Le TV service centre ????
Hi!
Any update since October? I`m facing the same issue. I have googled a bit and found some complaints related to LCDs from Aliexpress claiming that they are no so bright and blurry, sometimes with white spots.
I have also find only a glass replacement https://www.aliexpress.com/item/5-7...lgo_pvid=aec8908f-0e28-4202-a650-ab20f3981970
of a glass with digitizer: http://www.ebay.com/itm/for-LeEco-L...966586?hash=item58e23ffdba:g:z4wAAOSw-kdXxPkl
But... also a lot people claims that the LCD is almost inseparable from glass... Do anyone have an experience with only glass replacement?
I found a local service that claims to be able to do that.. but I do not know whether to trust them not destroy the LCD. The said, that they do not have an experience with Le Max 2 but with other phones.
Thanks
xjack03 said:
Hi!
Any update since October? I`m facing the same issue. I have googled a bit and found some complaints related to LCDs from Aliexpress claiming that they are no so bright and blurry, sometimes with white spots.
I have also find only a glass replacement https://www.aliexpress.com/item/5-7...lgo_pvid=aec8908f-0e28-4202-a650-ab20f3981970
of a glass with digitizer: http://www.ebay.com/itm/for-LeEco-L...966586?hash=item58e23ffdba:g:z4wAAOSw-kdXxPkl
But... also a lot people claims that the LCD is almost inseparable from glass... Do anyone have an experience with only glass replacement?
I found a local service that claims to be able to do that.. but I do not know whether to trust them not destroy the LCD. The said, that they do not have an experience with Le Max 2 but with other phones.
Thanks
Click to expand...
Click to collapse
If you can get the fast delivery, then you can give it a go. Although it's a risky operation,it might be alright in the end. The service should have some experience if they say that for other brands/phones they have succeeded. It might be ok, but always keep in mind that something might go wrong. And it's not worth waiting 2 months for the glass and another 2 for the display.
Edit: you can google the process and you will see how it's done for other phones. They need to have special devices.
valy_cta said:
If you can get the fast delivery, then you can give it a go. Although it's a risky operation,it might be alright in the end. The service should have some experience if they say that for other brands/phones they have succeeded. It might be ok, but always keep in mind that something might go wrong. And it's not worth waiting 2 months for the glass and another 2 for the display.
Edit: you can google the process and you will see how it's done for other phones. They need to have special devices.
Click to expand...
Click to collapse
Thanks for such a fast reply. I already did https://www.youtube.com/watch?v=cRqSyZk1SOU It seems to be very tricky. I have relatively fast delivery about 2-3 weeks so I`ll give it a try with only a glass an digitizer http://www.ebay.com/itm/for-LeEco-L...966586?hash=item58e23ffdba:g:z4wAAOSw-kdXxPkl.
I`ll write a review after the whole process is done for future reference
Very difficult. They make it look easy on youtube. I attempted a glass only repair on a nexus 6. You have to have correct amount of heat, and the LCD is very fragile. Too much heat will damage the display, but you need enough heat to soften the loca glue to be able to separate the glass from the lcd.. I even had a scientific dry bath at my disposal to get the right temp.. Not worth a home repair attempt IMO.
Cost of the le max 2 is just the reason I bought this phone (vs a $600+ device) and put on tempered glass from Ali express for less than $2. Will you consider replacing your phone for $200?
My wife broke her tempered glass protector twice on the max 2. Easy fix, just replaced the tempered glass cover. I'm just saying I learned the hard way, on a more expensive Nexus 6. I wasn't aware of tempered glass protectors then. Even after destroying my lcd (by trying a glass-only repair) and ending up buying the lcd+glass assembly, I still didn't get the phone's frame tight with the display assembly to make it acceptable.
I tried to repair lcd once for another phone. It took me 1h just to disassemble the phone, and half an hour more to try to carefully separate lcd from digitizer. I failed and then there was no point spending another hour puting the phone back together and had to throw all those tiny parts to the garbage. Think about this before you try.
Home repairs of such kind are a no go. This is why I encourage him to go to the repair shop where they do that kind of repairs to the screen. They do have a special heated plate with temperature adjustment, a vacuum device that eliminates any bubbles between the lcd and glass, etc. Also do note that not all the repair shops are doing this. Most of them are collecting phones for the specialized shops and charge an extra fee.
In conclusion, this kind of repair is not for everybody, and it would be best done in a specialized repair shop. For reference, check the following video:
I know it's written in romanian and for an Allview, but I guess that most of the things are understandable to get the idea of how complicated the whole process is for any home attempt.
So, after a month in repair center I have my phone back. The screen is an original one with digitizer changed. Between digitizer and screen there are some bubbles, buttons are switched, like back is on a left instead of right and the bugged issue... They are very undeterministic and do not always work and sometimes they work without even touching so... Apps are switching and so on... I needed to disable them and use gestures instead.
The repair was about 40USD and digitizer 15 USD... It is hard to say whether it was worth it or exchange the complete screen.
Hello, please help me.
I live in MAYOTTE, I have to order a new screen. I do not find any vendor who delivers in my country.
Mayotte : https://goo.gl/maps/m62kwSK7yC92
raphimor said:
Hello, please help me.
I live in MAYOTTE, I have to order a new screen. I do not find any vendor who delivers in my country.
Mayotte : https://goo.gl/maps/m62kwSK7yC92
Click to expand...
Click to collapse
I'm the owner of the repair shop. I can take care of this phone, but I'm living on the other end of the world. Is there any career that can deliver something to you from Europe? I would like to make a video tutorial how to repair this phone, but mine one is working so there is no sense in repairing working phone...
CrazyPonkeyMen said:
I'm the owner of the repair shop. I can take care of this phone, but I'm living on the other end of the world. Is there any career that can deliver something to you from Europe? I would like to make a video tutorial how to repair this phone, but mine one is working so there is no sense in repairing working phone...
Click to expand...
Click to collapse
Yes of course. I can receive a parcel from europe thanks to CHRONOPOST
raphimor said:
Yes of course. I can receive a parcel from europe thanks to CHRONOPOST
Click to expand...
Click to collapse
I can personally recommend this vendor. https://www.aliexpress.com/item/For...32820735893.html?spm=a2g0s.9042311.0.0.xEXMor
Replacing the screen + digitiser on this model is pretty easy provided you have access to a hot air gun. Took me about 15 minutes and I'm in NO WAY a pro. For the price of a new screen I definitely wouldn't attempt a digitizer-only repair.
mikeysteele said:
I can personally recommend this vendor. https://www.aliexpress.com/item/For...32820735893.html?spm=a2g0s.9042311.0.0.xEXMor
Replacing the screen + digitiser on this model is pretty easy provided you have access to a hot air gun. Took me about 15 minutes and I'm in NO WAY a pro. For the price of a new screen I definitely wouldn't attempt a digitizer-only repair.
Click to expand...
Click to collapse
Wow.... That's cheap enough to order one and have it just in case.....
Thanks for the link
I have brought this one.
https://www.aliexpress.com/item/Gra...32799506808.html?spm=a2g0s.9042311.0.0.HsyGUO
And I can say, It's same as the original one in every detail(Even production date so close). Replacement is very easy with tool that came with screen.
BTW, You have to buy glue(B6000,E7000,T8000 or whatver) for fix it in place.
Ok, my fault entirely. My Sony ZL went 4.5 years without me damaging it, with no case. My Pixel 2 ZL didn't make it 3 weeks.
It landed on the top right corner, and there is a small star there open in the center. Not terribly noticeable, but definitely an opening that would allow water in, and maybe over time it might spread and come apart.
I don't mind paying to get it fixed. UBREAKIFIX is the repair site for Google and says $79.
But they don't have parts.
The bigger deal is this: One said they had to do a complete teardown from the front to get to it, and complete reassembly. Another I called said it was simply the back glass, pop off, glue on a new one.
The latter makes me feel a lot more comfortable doing it; a complete teardown makes me worry the cure is worse than the disease, whether they really can get it together again and seal it well. I might be more tempted to try to seal just that star, rather than have them open up every seal and seam and (more than likely) have mine be the XL2 they have seen at that store.
Anyone know for sure?
Is the back glass replaceable without a complete teardown?
Good/bad experiences with ubreakifix (do they train their staff well? I realize it's a franchise so it's somewhat luck of the draw by store).
not sure if it will help you....
https://www.ifixit.com/Teardown/Google+Pixel+2+XL+Teardown/98093#s180064
I have been fixing phones for a long time, this fix is extremely easy if you would have the part available, unfortunately, nor eBay or Amazon seem to have it.
@uicnren thanks, I had seen it, didn't help much as I only found the put-together and it started with a full teardown. @tatico28, thanks - does that mean the glass does come off by itself, without removing/releasing anything from the front? As I mentioned, I'm happy to have someone else do it, and pay for it, I just don't want to have a new phone look like a 3 year old playing with glue from an incompetent repair. I'm also game to do it myself if I had parts and instructions (I've done lots of electronic repairs, but generally ones that open with screwdriver, not pry bars).
Yes, you definitely need a heat gun ? and a pry tool.
tatico28 said:
Yes, you definitely need a heat gun and a pray tool.
Click to expand...
Click to collapse
"Pray" tool... pun intended, or good typo, but perfect wording.
My back glass broke Day 2 of owning it...waited two weeks for the part to arrive at ubreakifix. Just the glass was replaced for $79 in about 30-45 mins and good as new again with full Google warranty in place. I did check out a couple of ubreakifix locations nearby before I got it done...I would advise you do so as well since I did not get a good vibe from the first place when the person told me it will take 3-4 hours and he has to consult videos and manuals to do it...
The other Google authorized repair partner is puls.com but they said they do not repair the back glass yet.
Good luck!
@hammer7t, thank you very much, that's what I wanted to hear. I do have several stores down here, think I will wait for the holiday to be over and maybe more to get parts, and shop around.
For the least invasive process possible, try using an automotive windshield repair kit.
UBREAKIFIX repaired it yesterday in about 20 minutes, looks like new.
https://youtu.be/u9SVsdX94uM
He removed the back glass near the end.
@stevemw, thanks, that's much better than the last one I looked at. So it appears that back glass is not just a piece of glass, but includes the covers for the camera and flash rather than just fitting around them?
Regardless, it does leave the impression the phone is generally built to be serviceable.
Yes -- spare parts should be available soon. Why not try a case for now? https://www.amazon.com/gp/aw/d/B07475C1VT/ref=ya_aw_od_pi?ie=UTF8&psc=1
Thanks. As mentioned, they had plenty of spares, and it is fixed. Though I do like the looks of that case, and might give it a try.
Linwood.Ferguson said:
UBREAKIFIX repaired it yesterday in about 20 minutes, looks like new.
Click to expand...
Click to collapse
Did they say anything about the water/dust resistance being in tact.
pEpSi_GrEeN said:
Did they say anything about the water/dust resistance being in tact.
Click to expand...
Click to collapse
They claimed it would have no impact and it was still warrantied as they were authorized by google.
Hello!
Does someone has replace the galss at home?
From the teardown picture is clear:
- you need a heat gun
- you need a pry tool
- the camera and the flash lenses are sticky with the glass
https://d3nevzfk7ii3be.cloudfront.net/igi/Zm4SEMDJK6jbxDUB.huge
Remove the back glass seems easy, but how about remove the lenses from the glass and how to remount them on the replacement glass?
Thnaks
Bumping this, I'm in the same boat.
Not even a week and I cracked my backglass. I too am interested in the lens removal.
Is there any parts available that have this attached already? I've no problem doing it myself, just need as much info as possible.
Cheers.
MortitionPoet said:
Bumping this, I'm in the same boat.
Not even a week and I cracked my backglass. I too am interested in the lens removal.
Is there any parts available that have this attached already? I've no problem doing it myself, just need as much info as possible.
Cheers.
Click to expand...
Click to collapse
I have not found any replacement lenses or back glass with lenses already installed.
Watching youtube videos I saw that old pixel 1 have only the flash lens and it was simply stuck in the back glass hole.
Just to laugh...
I wrote to official Google assistance here in Italy to have information about the back glass replacement.
The answer was: 232Euro + VAT (about 280Euro) to repair the phone and 20/25 days to wait...
But, the most amazing thing is that the price of the only examination (in the case i don't want to repair) is 77Euro + VAT ( about 92Euro).
Dear Google...you are crazy...