Related
Ok here is mod for all working rom for HTC one V
Version: FX version 2.2.0.6 / XHiFi version 2.0.0.9
Codename: (FX version) Beautiful / (XHiFi version) X-Factor
Compiled date: May 4,2013 / May 4,2013 - Official Release
Language: English (United States) / Simplified Chinese / Traditional Chinese
downloads
FX version v2.2.0.6: http://www.mediafire.com/download.php?wn2cn1lrltn685x (In-App Installation 2.3/4.0/4.1/4.2)
XHiFi version v2.0.0.9: http://www.mediafire.com/download.php?ey6ablp36s7uqbh (In-App Installation 2.3/4.0/4.1/4.2)
In-App Installation within V4A
Requirement: Rooted, installed Busybox.
Description: Starting from FX v2.2.0.4/XHiFi v2.0.0.7, Intelligent Setup is added to V4A.
This setup replaces auto/manual installation, providing the easiest installation method.
Just follow the instructions when you first run the V4A app.
[FX/XHiFi version]
Make sure BUSYBOX Fully Installed
1. Extract and Install ViPER4Android_FX.apk
2. Run FX app, when prompt, choose Yes to install/update.
3. Choose correct CPU Type.
4. Reboot device.
Switch to Compatible Mode (To use with any other sound effects including system-provided/third party)
1. In option, switch to Compatible Mode.
2. Reboot device.
3. In sound settings > music effects > Choose anything other than V4A, because V4A effects will work just like that in compatible mode.
Switch to Safe Mode (To work with almost any music player)
1. In option, switch to Safe Mode.
2. Reboot, done.
driver type selection ???
CortexA8 with NEON
(because HTC ONE V is a Single core processor)
plz give the original link
Thanks!
after installation (for Viper4android FX)
for headset
master power =enable
playback gain control=enable
effect strength = moderate
Firequalizer=enable
select preset= your wish
remaining leave it as it is...
Seraz007 said:
plz give the original link
Thanks!
Click to expand...
Click to collapse
given one is the original link only
gulsher said:
given one is the original link only
Click to expand...
Click to collapse
i mean the original thread
I'am using the same above configuration preset =rock
with poweramp
equalizer= bass booster
and its amazing
Seraz007 said:
i mean the original thread
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2191223
here you go
Wats the diff. B/w fx version and xhifi version????
rohov said:
Wats the diff. B/w fx version and xhifi version????
Click to expand...
Click to collapse
fx is used as normal for speaker or earphone
xhifi is used for retoring the sound quality basically used for earphones
gulsher said:
fx is used as normal for speaker or earphone
xhifi is used for retoring the sound quality basically used for earphones
Click to expand...
Click to collapse
So basically, which one is recomended???sry, i cant figure out about this mod and i dont kno y???:banghead:
just uninstall all the things related to it even drivers
give a restart
install FX version only
driver should be cortex a8
after installation (for Viper4android FX)
for headset
master power =enable
playback gain control=enable
effect strength = moderate
Firequalizer=enable
select preset= your wish
remaining leave it as it is.
and download this http://www.mediafire.com/download.php?33l7svyq1sf46th
and paste (there is a folder created in memory card called "viper4Android") there inside kernel and extract it there only!
and from FX
there is option in covolver
Impulse response tap it and select the option any 1 according to your need
I really do recommend this audio mod, best for music lovers, currently using NexMusic and This Mod = Ear Orgasms!!!!!
try this setting
playback gain control is on
effect strength: extreme
max gain: inf
max output: 0db
"FIRE" is on
preset: rock
Convolver is on
IR: UnitpulseDirac
Field Surround & Reverb is OFF
Dynamic System is on
Listening device: Unknown type I
Dynamic Bass: 20%
Tube: on
output gain: 0db
Limit Threshhold: -3.0db(-6.0db depends on the song,my mood)
rockstar_26 said:
I really do recommend this audio mod, best for music lovers, currently using NexMusic and This Mod = Ear Orgasms!!!!!
Click to expand...
Click to collapse
can you share EarOrgasms file mode??
zhuhang is the official maintainer of this mod, so I'm closing this thread. Please read the sharing policy before posting.
tried IRS below to test it out and it worked great back on KitKat
SRS Audio HD [SRS GEQ - Acoustic + SRS TruBass - 50% + SRS Dialog Clarity - 50%]
I finally updated to lolipop, i have V4a working except the IRS file isn't being detected.
Beats Audio for example works just fine, but nothing changes when i go to the SRS irs above.
Any advice? I've posted in nearly every V4a thread i could find and i keep getting told to reach out to maker of IRS file :\
Device: Nexus 7 2013
OS: 5.1.1.
Rom: Optipop
Kernel - Elemental X
SElinux - permissive
No other audio processors installed
BusyBox on rails installed and ran
Media Player: Power amp.
Prior on Kitkat, i had to install it as a user app, and then use the banned app to move it to system\app in order to get all IRS files to work. IRS files are crucial to me because i use my N7 2013 in dash in my car.
On lolipop, no matter what method i use (whether i install apk, move apk to system\app or flash viper4android zip files), i can get it to process audio under poweramp, but irs files aren't being truly recognized (some are)
Any suggestions?
P.s. - i have been using the following two zips from these threads :
http://forum.xda-developers.com/lg-...-viper4android-lollipop-t3075794#post60588642
and
http://forum.xda-developers.com/google-nexus-5/themes-apps/discussion-viper4android-t2543796
as well as the apk from the official site.
EDit: read the last 3 pages, I will try the APK method on it's own as a user app, will report back.
Edit: installed 4.x apk , installed drivers , set my settings, rebooted, used the "banned" app to move to system app. Convolver IRS files work flawlessly, and i have to set it to compatible mode, but now i have constant popping in audio :\
What version of SELinux Mode Changer are you using?... I had issues getting the latest version (3.01) to work. I went back to SELinux Mode Changer 1.2 and Viper4Android FX v.2.3.4.0 to get it to work on my N7 2013. It does not boost the volume up that much, but it provides better clarity at a higher volume. I'm running Viper on "Stock" LP 5.1.1 rooted.
Edit: Also try testing using a different player and check the Driver Status under Viper.'s setting to check if it's processing.
tamanaco said:
What version of SELinux Mode Changer are you using?... I had issues getting the latest version (3.01) to work. I went back to SELinux Mode Changer 1.2 and Viper4Android FX v.2.3.4.0 to get it to work on my N7 2013. It does not boost the volume up that much, but it provides better clarity at a higher volume. I'm running Viper on "Stock" LP 5.1.1 rooted.
Edit: Also try testing using a different player and check the Driver Status under Viper.'s setting to check if it's processing.
Click to expand...
Click to collapse
I used version 2.0.2
It worked fine in changing it (latest one didn't).
Also, it's processing, it's the Convolver and IRS that isn't.
bump
help
bump!
interesting turn of events, i used the lolliviper zip above in the links, and then moved it manually back to user app but left the preinstalled drivers and audiopolicy included in the zip in the system files.
v4a disappeared, okay no biggie, reinstalled the apk from the official site, settings were all there, drivers were already installed from prior installation. Poweramp works, all irs files work, no cracking or popping.
What a complicated route to take to make sure all irs files and poweramp to work, but the audiopolicy is key, i can upload it for those who are interested to decipher for me what i cannot specifically
bump
Still need help, 3.5mm connection via n7 2013 on power amp +5.1.1 + v4a = static and popping
ABOUT
-Build on Xperia XZ_7.1.1_41.2.A.7.53 firmware.
-XLoud, Clear Phase, Clear Stereo, Stereo speaker while incoming notifications & Ringtone + Stereo speaker in call loud speaker
-Viper4Android for Stock Sony Rom
For Xperia XZ 7.1.1
1- Rooted device needed
2- Flash through recovery
3- For both ( Odex & Deodex )
Info
1- Stereo Sound Mod Only.
2- Stereo Sound Mod with Sony Settings.
Optional - Viper4Android v2.5.0.5 For Sony 7.1.1 Stock based Rom.
Click to expand...
Click to collapse
Instructions & Download
- Do not install or use amplified system sound, as speaker is already loud enough
- Do not use this Mod with other audio mods
- Make a backup in recovery before flashing this, to restore it later if you want to uninstall this mod
Click to expand...
Click to collapse
Download
Here are Two different kinds of sound mods with viper4Android as optional.
1- Stereo Sound Mod Only
https://drive.google.com/open?id=0B2rIgSq3i4H8Z1dXUm9QQVpsVnM
This Mod will provide you;
- Stereo Mod in Call and Speakers
- Stereo sound while incoming call ringtone & notifications.
2- Stereo Sound Mod with Sony Settings
https://drive.google.com/open?id=0B2rIgSq3i4H8aVhFS0RvR3o4VGs
This Mod will provide you;
- Stereo Mod in Call and Speakers
- Stereo sound while incoming call ringtone & notifications.
- All Sony Settings (XLoud, Clear Phase, Clear Stereo)
Optional - Viper4Android v2.5.0.5 For Sony 7.1.1 Stock based Rom
https://drive.google.com/open?id=0B2rIgSq3i4H8ZHZtMkFidmE2bmc
This Mod will provide you Viper 4 Android only for Sony 7.1.1 Stock based Rom.
Credits
Sony For system files
jimRnor For Project DiVA_MM Kitakami series & his Permission to use
Rajeev For his Sound Mod & Permission to use
ViPER's Audio founded by ViPER520 & ZhuHang.
I want to say thanks to arjun.arora for his sound mod, i learn from his sound mod that how we can code for stereo sound.
Reserved...
Let's try @zohaib0001's mod after Sony Ericsson Xperia™ ARC and Xperia™ Z2 with Xperia™ XZ. Thank you...
Great work.
Thank you for the options.
At the moment I still use viper4android 2.4.0.1 on android 6 on my sony xz. Unfortunately I have that problem that the sound drivers from the nothing turn off. If I open the app then everything goes again. (Connected via headphones)
Update available for 7.1.1 - 199 firmware
hello,
can this be used on the latest 41.2.A.7.8 ?
if no, i would like to request an update
@eddieleon7pc
Mod updated
zohaib0001 said:
@eddieleon7pc
Mod updated
Click to expand...
Click to collapse
Hi,
I'm really interested in this.
Can I ask for your invaluable ideas on:
1) viper4Arise, is it any better or worse then viper4android?
2) Dolby atmos, is it any better or worse then viper4android?
3) Failing any advantages from points 1 or 2 above what setup have you chosen to go with of the 3 options you supply? I would assume viper4android, but I would like to go with what's been tried and tested by the yourself.
I'm typically interested in better voice calls both over loudspeaker & in ear, as well as better music playback levels over loudspeaker.
4) Are you aware of the Viper4Android FX module available through Magisk. Would this be the same or would you advise against this version? If it is indeed the same then perhaps this method would allow for me to try and perhaps remove the mod if need be (easier then restoring a TWRP backup as such.)
Thanks in advance for your time
dillalade said:
Hi,
I'm really interested in this.
Can I ask for your invaluable ideas on:
1) viper4Arise, is it any better or worse then viper4android?
2) Dolby atmos, is it any better or worse then viper4android?
3) Failing any advantages from points 1 or 2 above what setup have you chosen to go with of the 3 options you supply? I would assume viper4android, but I would like to go with what's been tried and tested by the yourself.
I'm typically interested in better voice calls both over loudspeaker & in ear, as well as better music playback levels over loudspeaker.
4) Are you aware of the Viper4Android FX module available through Magisk. Would this be the same or would you advise against this version? If it is indeed the same then perhaps this method would allow for me to try and perhaps remove the mod if need be (easier then restoring a TWRP backup as such.)
Thanks in advance for your time
Click to expand...
Click to collapse
Well I did not try viper4Arise but I try Dolby in past, for me viper4android is definitely better and it’s my opinion only may be other people like other mods.
I have two kind of sound mod
1- Stereo Sound Mod Only.
2- Stereo Sound Mod with Sony Settings.
And Viper for Android is optional mod that you can use with any one of above sound mods.
Magisk version is same, and there is no difference
zohaib0001 said:
Well I did not try viper4Arise but I try Dolby in past, for me viper4android is definitely better and it’s my opinion only may be other people like other mods.
I have two kind of sound mod
1- Stereo Sound Mod Only.
2- Stereo Sound Mod with Sony Settings.
And Viper for Android is optional mod that you can use with any one of above sound mods.
Magisk version is same, and there is no difference
Click to expand...
Click to collapse
I had flashed your viper4android a few days ago - but didn't flash either of the other mods.
I was under the impression to flash only 1 of the 3 and not a mixture.
So is it ok for me to flash "2- Stereo Sound Mod with Sony Settings" now, even though I have already flashed viper4android?
Thanks in advance
dillalade said:
I had flashed your viper4android a few days ago - but didn't flash either of the other mods.
I was under the impression to flash only 1 of the 3 and not a mixture.
So is it ok for me to flash "2- Stereo Sound Mod with Sony Settings" now, even though I have already flashed viper4android?
Thanks in advance
Click to expand...
Click to collapse
Yes you can flash over viper
Is anyone using this with magisk installed.
I'm getting bootloop. Just wants to find out if anyone else has had bootloops with this viper4android and magisk ?
dillalade said:
Is anyone using this with magisk installed.
I'm getting bootloop. Just wants to find out if anyone else has had bootloops with this viper4android and magisk ?
Click to expand...
Click to collapse
I am using both, I did not enabled the Viper4android mod in Magisk, working fine.
Working XZ 7.1.1 41.2.A.7.35?
anhsmile said:
Working XZ 7.1.1 41.2.A.7.35?
Click to expand...
Click to collapse
Yes, Fully working
Hi, works on MM? 3.30
ivanmasi said:
Hi, works on MM? 3.30
Click to expand...
Click to collapse
Title says clearly 7.1.1 (Nougat) weird yiu ask for MM, so no !
Verstuurd vanaf mijn F8331 met Tapatalk
working new firmware on XZ?
Clearly working with .53 based firmwares.
Envoyé de mon F8332 en utilisant Tapatalk
Salam and hello everyone, ive edited mixer_paths_mtp from oreo 8.1 and made a magisk module for Dual Speaker SoundMod (vince) [AOSP PIE ONLY] .
read carefully, [AOSP PIE ONLY!!!]
check #2 post for latest AOSP Pie , AOSP Q and Miui11 Pie Vince updates
first flash magisk module.
(if dual speaker not working for you after reboot, proceed manual steps below)
then
paste manually the edited mixer_paths_mtp.xml into root/system/vendor/etc - using root explorer/mixplorer or other file manager
(copy the original mixer_paths_mtp.xml from root/system/vendor/etc to sd card or anywhere you like, rename the edited mixer_paths_mtpMODI.xml to mixer_paths_mtp.xml
then copy and paste it into root/system/vendor/etc. change permissions to 644 (rw- r-- r--), after that reboot your phone.)
try listen to the dual speaker.........
*its working for me, tried on latest PE and Havoc 2.7
*forgot to mention, i also flashed audio modification library too. (download from magisk) if dualspeaker already working for u guys just ignore.
Please try and give me feedback.
also careful on the volumes for u guys that
already got audio enhancer such as viper/dolby etc. installed.
your phone, your risk
Thank u very much...
Magisk
https://drive.google.com/file/d/1-1C4w0OV8Eyzl1jq1Xj1FH-DgBzKQQfE/view?usp=drivesdkanual
Manual
https://drive.google.com/open?id=1-6fhdJ_V3nNxaiC_MTJrhmspZJaWWfQd
Tutorial Video ( i forgot to"copy the original mixer_paths_mtp.xml from root/system/vendor/etc to sd card or anywhere" in the video)
https://drive.google.com/file/d/1J1fb_Z9mBXu6p7-USO464fHLDWg6z3K0/view
VIPER4Android FX v 2.7.1.0
i can share mine. ive added with my 4 viper profiles in it, so u can just choose which profile for speaker,headset,usb or bluetooth that suits u after installed.
-download the link below
https://drive.google.com/file/d/1-bH1CILCTxt0o0Gxi-mm7GhfIoWIPPbS/view?usp=drivesdk
-extract it in internal storage
-go to magisk, search viper4android fx version 2.7.1.0 and flash that or download here
https://drive.google.com/file/d/1-ewer6lRMSOMPzq1issS520rJEr3QCsZ/view?usp=drivesdk
or zackptg5 website https://zackptg5.com/android.php
-after that find viper4android.apk in apps drawer. install it, grant root access,install driver and it will autoreboot.
-after rebooting your device, open viper4android.apk again and click speaker. choose any of 4 profiles there. i recommend the kustom or kustom dolby system bcoz the original dolby system too loud (for me). so i edited and create the kustom profile.
-load the profile. done.
(u can play song while u load the profile too, to check and choose which profile suits u. same goes for headset,usb and bluetooth.
if u want to add more profile, paste it in the
internal > viper4android > profile. )
Credits :
Allah The Almighty
source code @Dante63
oreo mod @rashidmalyk
Latest
October 30 2019
-sharing my last dualspeaker work for vince, moving to a new phone.
-Miui11 Pie Vince only DualSpeaker Mod
Magisk
https://drive.google.com/file/d/1-9w5X_Z6TybdB8jeMeQHE0ZMvg45BIBo/view?usp=drivesdk
Manual
https://drive.google.com/file/d/1-DMiJNzTrjJhUwqbqUx9BAf803TGsKma/view?usp=drivesdk
October 2nd 2019
For Q, u can use the September 3rd 2019 Pie mixer file below for dual speaker mods.. better use manual method for now, and i didnt test any audio enhancer yet. but can confirm that dual speaker is working...
thanks
September 26th 2019
* just a little guide to make sure your dual speaker working...
-the original mixer file size for aosp pie is 62.48kb, the file ive edited is 63.71kb, so if u see your mixer_paths_mtp.xml in root/system/vendor/etc is 62.48kb apply manual method again and reboot. u need to have the 63.71kb mixer_paths_mtp.xml file in root/system/vendor/etc to make your dual speaker working. hope this will solve your "not working dual speaker issue".
September 3rd 2019
Enhanced Version DualSpeaker Stereo Mod For Vince (AOSP Pie) Extra Careful On Volumes, Especially For Audio Enhancer User
*created from latest aosp pie rom mixer file(august security patch rom)
*for this file 1 ive put nearly max setting on all speaker output and edited a few lines for headphone in the mixer file.
*the purpose? to enhanced bass sound, better stereo mod from both earpiece and main speakers.
Magisk
https://drive.google.com/file/d/1-S6CJEhjyNVQzT1KJlYYEW4Z-IlQLmjE/view?usp=drivesdk
Manual
https://drive.google.com/file/d/1-YYO30j491GXNtiZ1K22TOOWRiqEQhh9/view?usp=drivesdk
#tried on vince Android Q gsi, working
*as usual need to use both method, i will not create anymore magisk module or fix current magisk module. if anyone willing to help to make working magisk module, please do so and share here.. thank you very much
not working with magisk, tried the manual method.
working :victory:
thanks @ninken84 :good:
got pms and replies..it seems that magisk module not working for some pie custom roms, i dont know how that happened bcoz i use the same file that ive edited. so, if anybody had the same issue then i suggest just use both magisk and the manual method bcoz it will be fine. thanks
Can you make a video for me? And Salam you
SonyThEgAMaer said:
Can you make a video for me? And Salam you
Click to expand...
Click to collapse
pmed.. thanks
Can confirm it works on PE with DA Kernel and Audio Modification Library and Viper4Android. Really really nice mod. It really improves audio and the speaker is so loud which surprised me.
Moon_420 said:
Can confirm it works on PE with DA Kernel and Audio Modification Library and Viper4Android. Really really nice mod. It really improves audio and the speaker is so loud which surprised me.
Click to expand...
Click to collapse
nice..good to hear bro :good:
thanks for the feedback
Moon_420 said:
Can confirm it works on PE with DA Kernel and Audio Modification Library and Viper4Android. Really really nice mod. It really improves audio and the speaker is so loud which surprised me.
Click to expand...
Click to collapse
What is DA Kernel? You have ViPER4Android FX Legacy or XHifi?
XxXxXx121212 said:
What is DA Kernel? You have ViPER4Android FX Legacy or XHifi?
Click to expand...
Click to collapse
-DA kernel is Dark Age kernel
-i think hes using the same as mine Viper4Android FX
i can share mine. ive added with my 4 viper profiles in it, so u can just choose which profile for speaker,headset,usb or bluetooth that suits u after installed.
-download the link below
-extract it in internal storage
-go to magisk, search viper4android fx version 2.7.1.0 and flash that.
-after that find viper4android .apk in apps drawer. install it, grant root access,install driver and it will autoreboot.
-after rebooting your device, open viper4android . apk again and click speaker. choose any of 4 profiles there. i recommend the kustom or kustom dolby system bcoz the original dolby system too loud for me. so i edited and create the kustom profile.
load the profile. done.
(u can play song while u load the profile too, to check and choose which profile suits u. same goes for headset,usb and bluetooth.
if u want to add more profile, paste it in the
internal > viper4android > profile. )
Viper4Android
https://drive.google.com/file/d/1-bH1CILCTxt0o0Gxi-mm7GhfIoWIPPbS/view?usp=drivesdk
ninken84 said:
-DA kernel is Dark Age kernel
-i think hes using the same as mine Viper4Android FX
i can share mine. ive added with my 4 viper profiles in it, so u can just choose which profile for speaker,headset,usb or bluetooth that suits u after installed.
-download the link below
-extract it in internal storage
-go to magisk, search viper4android fx version 2.7.1.0 and flash that.
-after that find viper4android .apk in apps drawer. install it, grant root access,install driver and it will autoreboot.
-after rebooting your device, open viper4android . apk again and click speaker. choose any of 4 profiles there. i recommend the kustom or kustom dolby system bcoz the original dolby system too loud. so i edited and create the kustom profile.
load the profile. done.
(u can play song while u load the profile too, to check and choose which profile suits u. same goes for headset,usb and bluetooth.
if u want to add more profile, paste it in the
internal > viper4android > profile. )
Viper4Android
https://drive.google.com/file/d/1-bH1CILCTxt0o0Gxi-mm7GhfIoWIPPbS/view?usp=drivesdk
Click to expand...
Click to collapse
Thanks
Tested the magisk module and its working (Syberia rom, DA kernel and ViPER)
but which line can i edit in the mixer to increase ear speaker volume?
counter100 said:
Tested the magisk module and its working (Syberia rom, DA kernel and ViPER)
but which line can i edit in the mixer to increase ear speaker volume?
Click to expand...
Click to collapse
nice bro :good:
ear for earspeaker/earpiece,
but there r a few other lines also need to be edited there too for earspeaker.
i put 90 for ear speaker.max is 95 so becareful bro. cant guarantee
i suggest u watch dante63's tutorial first
https://youtu.be/Su9Af-jrJWQ
not working with ainur sauron or narsil? even after installing aml?
obliviousryuk said:
not working with ainur sauron or narsil? even after installing aml?
Click to expand...
Click to collapse
sorry bro, i dont know bout this. never tried ainur sauron or narsil before.
can u give me the download link,i want to try it too
ok, just tried ainur sauron.
flashed ainur sauron MK III (27.05)
checked root/system/vendor/lib/soundfx and root/system/vendor/lib64/soundfx
the files installed there.
to make it working need a manager, so i download and flashed Ainur JamesDSP v2.2 .
rebooted, open music, open JAMESDSP Manager. tweak it... and yes, its working.
*ive checked that dual speaker already working before i flash the JAMESDSP manager
*flashed without viperfx/dolby
download the manager at magisk Ainur JamesDSP v2.2 or here https://zackptg5.com/android.php
try and give feedback.. thank you
Good
Is it works for pixel caf rom
srinu1997 said:
Is it works for pixel caf rom
Click to expand...
Click to collapse
try it bro. and yes, its for aosp pie android 9 .
Its not working in havoc 2.8 there one deference in file name you say mixer_path_mtp.XML in hovec 2.8 have mixer_path.XML I try to rename like havoc but not sound?
Found this thread on XDA for the latest Viper4Android method that also works on the Poco F3 with Root and SELinux enforcing mode.
Link: https://forum.xda-developers.com/t/viper4android.4258655/
Anyone know where I can get the latest collection of Convolver Samples?
Nemix77 said:
Found this thread on XDA for the latest Viper4Android method that also works on the Poco F3 with Root and SELinux enforcing mode.
Link: https://forum.xda-developers.com/t/viper4android.4258655/
Anyone know where I can get the latest collection of Convolver Samples?
Click to expand...
Click to collapse
Most of convolvers are outdated, the best you can do is to go on the viper4android telegram channel, contact Thomas de Witt and pay 4 euro for a personal convolver for your headphone. Or you can do it yourself but it requires some solide knowledge. There are too convolvers from stormviper, a modded viper4android but the creator is a little strange and you have to ask them personally and do a "review" for the creator to get the last convolvers (testing purpose I guess). They have a telegram channel too. You can still find pack on Google but it's old. Sorry for my English !
Greenspoof said:
Most of convolvers are outdated, the best you can do is to go on the viper4android telegram channel, contact Thomas de Witt and pay 4 euro for a personal convolver for your headphone. Or you can do it yourself but it requires some solide knowledge. There are too convolvers from stormviper, a modded viper4android but the creator is a little strange and you have to ask them personally and do a "review" for the creator to get the last convolvers (testing purpose I guess). They have a telegram channel too. You can still find pack on Google but it's old. Sorry for my English !
Click to expand...
Click to collapse
Those irs files are overrated, I personally like the same settings on all of my headphones. I like moderate gain, set to inf, I love level 3 surround sound, dynamic system high end v1 at 20 percent for bass, clarity 12db or 14.8db it depends. That's my perfect settings for Bluetooth, headphones don't require so much gain. You can also search Google fiio fh5 github or IRS file and it used to find the github for those headphones I can't seem to get it anymore. There honestly nothing special they make headphones sound worse really
Techguy777 said:
Those irs files are overrated, I personally like the same settings on all of my headphones. I like moderate gain, set to inf, I love level 3 surround sound, dynamic system high end v1 at 20 percent for bass, clarity 12db or 14.8db it depends. That's my perfect settings for Bluetooth, headphones don't require so much gain. You can also search Google fiio fh5 github or IRS file and it used to find the github for those headphones I can't seem to get it anymore. There honestly nothing special they make headphones sound worse really
Click to expand...
Click to collapse
Global IRC, indeed, but the creator of viper4android can create a custom one based on your specific headphone and just for your headphone. Therefore, the quality is a another world from basic irs. The one you find free today are old and so, they make more bad than any good.
I don't believe the version I'm running from the thread in link above has Surround, Headphones and Bluetooth options.
Nemix77 said:
I don't believe the version I'm running from the thread in link above has Surround, Headphones and Bluetooth options.
Click to expand...
Click to collapse
It's switch automatically, just connect your headphone
Greenspoof said:
Global IRC, indeed, but the creator of viper4android can create a custom one based on your specific headphone and just for your headphone. Therefore, the quality is a another world from basic irs. The one you find free today are old and so, they make more bad than any good.
Click to expand...
Click to collapse
The creator of viper doesn't do anything anymore. The team Dewitt isn't the creator he's just using the open source code for the Normal driver because the viper creator won't allow him access to super quality driver from 2.3.4 my choice. No those custom IRS files are junk I have the fiio fh5 iem and the IRS files they made it makes my headphones sound wimpy. Trust me find the settings you like on viper and a good pair of headphones like my personal favorites are Master and dynamics MW08 Bluetooth.
Techguy777 said:
The creator of viper doesn't do anything anymore. The team Dewitt isn't the creator he's just using the open source code for the Normal driver because the viper creator won't allow him access to super quality driver from 2.3.4 my choice. No those custom IRS files are junk I have the fiio fh5 iem and the IRS files they made it makes my headphones sound wimpy. Trust me find the settings you like on viper and a good pair of headphones like my personal favorites are Master and dynamics MW08 Bluetooth.
Click to expand...
Click to collapse
Didn't know that. So do you use v2.3.4 or the new one ?
Greenspoof said:
Didn't know that. So do you use v2.3.4 or the new one ?
Click to expand...
Click to collapse
2.3.4 always on android 11 it takes a little extra setting up on most roms.
Techguy777 said:
2.3.4 always on android 11 it takes a little extra setting up on most roms.
Click to expand...
Click to collapse
And 2.3.4 is really better than nowadays viper? Like did you compare? Thx for your time
Techguy777 said:
2.3.4 always on android 11 it takes a little extra setting up on most roms.
Click to expand...
Click to collapse
And if so, could you tell me where did you download this version of viper? And how did you installed it ?
Techguy777 said:
2.3.4 always on android 11 it takes a little extra setting up on most roms.
Click to expand...
Click to collapse
I tried to install it but I have a I/o error, from what I read I have to change the name of a file inside vendor/etc but I can't because of permission, could you tell me how did you do that ? Thx !
I installed everything over magisk.
First Ainur Narsil and Audio modification library then reboot. After that viper then open viper and install the driver. The device will reboot. In magisk deactivate both Ainur and AML then open viper again. Driver should reinstall again. After reboot it should work. Could be that you have to enforce in settings. In a link above there is this method mentioned.
Greenspoof said:
I tried to install it but I have a I/o error, from what I read I have to change the name of a file inside vendor/etc but I can't because of permission, could you tell me how did you do that ? Thx !
Click to expand...
Click to collapse
It's going to seem like a lot of work but it's not. Your just going to download magisk files. First thing first you have root and I'm hoping your willing to switch your kernel to permissive mode? You can either do that with permissive v2 magisk module or selinux app. You need to have busybox from magisk installed.
Download 2.3.4 apk
1 switch selinux to permissive
2. Install BusyBox from magisk
Than reboot first
3. Install viper4android v4.4 on magisk manager use volume buttons to pick 2.3.4 install as a user app and if show recommended audio fix hit yes.
Reboot the device and see install the apk 2.3.4 and it should have the driver already installed.
If that doesn't work than you add James dsp magisk module new verison on magisk manager
Than flash audio modification file v4.0 after that
If you reboot again and reinstall the app and hopefully the driver will stick if it doesn't flash 4.4 zip again and reboot and install the apk.
You have to always reinstall the apk because the viper zip uninstalls it and it doesn't ever add it back likes supposed to but the driver stays installed and when you install the app shouldn't be no errors. You will need to grant storage permission for viper4android app.
It seems like a lot but it's really not and once it's installed properly it never uninstalls.
James dsp allows viper to play on phones for some reason but you can turn it off and just use viper that's what I do
https://drive.google.com/file/d/1kf02fMd-HDZp1SQkxk6wprZfbCv11eM2/view?usp=drivesdk
selinux_permissive_v2.0 (1).zip
drive.google.com
ViPER4Android FX(com.vipercn.viper4android_v2)-2.3.4.0(2340)-base.apk
drive.google.com
Trying to get all the files it's hard sometimes to find them so I'm saving you some time. 2.3.4 apk is impossible to find now I extracted the one I'm using
Techguy777 said:
It's going to seem like a lot of work but it's not. Your just going to download magisk files. First thing first you have root and I'm hoping your willing to switch your kernel to permissive mode? You can either do that with permissive v2 magisk module or selinux app. You need to have busybox from magisk installed.
Download 2.3.4 apk
1 switch selinux to permissive
2. Install BusyBox from magisk
Than reboot first
3. Install viper4android v4.4 on magisk manager use volume buttons to pick 2.3.4 install as a user app and if show recommended audio fix hit yes.
Reboot the device and see install the apk 2.3.4 and it should have the driver already installed.
If that doesn't work than you add James dsp magisk module new verison on magisk manager
Than flash audio modification file v4.0 after that
If you reboot again and reinstall the app and hopefully the driver will stick if it doesn't flash 4.4 zip again and reboot and install the apk.
You have to always reinstall the apk because the viper zip uninstalls it and it doesn't ever add it back likes supposed to but the driver stays installed and when you install the app shouldn't be no errors. You will need to grant storage permission for viper4android app.
It seems like a lot but it's really not and once it's installed properly it never uninstalls.
James dsp allows viper to play on phones for some reason but you can turn it off and just use viper that's what I do
https://drive.google.com/file/d/1kf02fMd-HDZp1SQkxk6wprZfbCv11eM2/view?usp=drivesdk
selinux_permissive_v2.0 (1).zip
drive.google.com
ViPER4Android FX(com.vipercn.viper4android_v2)-2.3.4.0(2340)-base.apk
drive.google.com
Trying to get all the files it's hard sometimes to find them so I'm saving you some time. 2.3.4 apk is impossible to find now I extracted the one I'm using
Click to expand...
Click to collapse
It worked thx !!!! How do I choose the driver type? Because I saw there was 3 driver, super quality, high quality and power saving. Or it's already in super quality?
Techguy777 said:
It's going to seem like a lot of work but it's not. Your just going to download magisk files. First thing first you have root and I'm hoping your willing to switch your kernel to permissive mode? You can either do that with permissive v2 magisk module or selinux app. You need to have busybox from magisk installed.
Download 2.3.4 apk
1 switch selinux to permissive
2. Install BusyBox from magisk
Than reboot first
3. Install viper4android v4.4 on magisk manager use volume buttons to pick 2.3.4 install as a user app and if show recommended audio fix hit yes.
Reboot the device and see install the apk 2.3.4 and it should have the driver already installed.
If that doesn't work than you add James dsp magisk module new verison on magisk manager
Than flash audio modification file v4.0 after that
If you reboot again and reinstall the app and hopefully the driver will stick if it doesn't flash 4.4 zip again and reboot and install the apk.
You have to always reinstall the apk because the viper zip uninstalls it and it doesn't ever add it back likes supposed to but the driver stays installed and when you install the app shouldn't be no errors. You will need to grant storage permission for viper4android app.
It seems like a lot but it's really not and once it's installed properly it never uninstalls.
James dsp allows viper to play on phones for some reason but you can turn it off and just use viper that's what I do
https://drive.google.com/file/d/1kf02fMd-HDZp1SQkxk6wprZfbCv11eM2/view?usp=drivesdk
selinux_permissive_v2.0 (1).zip
drive.google.com
ViPER4Android FX(com.vipercn.viper4android_v2)-2.3.4.0(2340)-base.apk
drive.google.com
Trying to get all the files it's hard sometimes to find them so I'm saving you some time. 2.3.4 apk is impossible to find now I extracted the one I'm using
Click to expand...
Click to collapse
Well statut is abnormal, I will try with James Dps but I'm not a fan of these kind of workaround lol, but the link of Google you gave me is deleted?
Techguy777 said:
It's going to seem like a lot of work but it's not. Your just going to download magisk files. First thing first you have root and I'm hoping your willing to switch your kernel to permissive mode? You can either do that with permissive v2 magisk module or selinux app. You need to have busybox from magisk installed.
Download 2.3.4 apk
1 switch selinux to permissive
2. Install BusyBox from magisk
Than reboot first
3. Install viper4android v4.4 on magisk manager use volume buttons to pick 2.3.4 install as a user app and if show recommended audio fix hit yes.
Reboot the device and see install the apk 2.3.4 and it should have the driver already installed.
If that doesn't work than you add James dsp magisk module new verison on magisk manager
Than flash audio modification file v4.0 after that
If you reboot again and reinstall the app and hopefully the driver will stick if it doesn't flash 4.4 zip again and reboot and install the apk.
You have to always reinstall the apk because the viper zip uninstalls it and it doesn't ever add it back likes supposed to but the driver stays installed and when you install the app shouldn't be no errors. You will need to grant storage permission for viper4android app.
It seems like a lot but it's really not and once it's installed properly it never uninstalls.
James dsp allows viper to play on phones for some reason but you can turn it off and just use viper that's what I do
https://drive.google.com/file/d/1kf02fMd-HDZp1SQkxk6wprZfbCv11eM2/view?usp=drivesdk
selinux_permissive_v2.0 (1).zip
drive.google.com
ViPER4Android FX(com.vipercn.viper4android_v2)-2.3.4.0(2340)-base.apk
drive.google.com
Trying to get all the files it's hard sometimes to find them so I'm saving you some time. 2.3.4 apk is impossible to find now I extracted the one I'm using
Click to expand...
Click to collapse
Nevermind, I thought I had to install Jamesdsp "verison", like a special Jamesdsp lol, everything work great right now!!! I really thank you for your time, really ! But just one last question subsiste, how I'm sure it's the super quality driver that is installed and not high quality or energy saving?
Nemix77 said:
Found this thread on XDA for the latest Viper4Android method that also works on the Poco F3 with Root and SELinux enforcing mode.
Link: https://forum.xda-developers.com/t/viper4android.4258655/
Anyone know where I can get the latest collection of Convolver Samples?
Click to expand...
Click to collapse
Always, much better than Dolby, AudioFX and others that I tested.
The "codecs" most important is DDC/Kernel (.vdc and .irs).
When I install them in 2019 liked ClearPlus HD.irs and V4ARISE.vdc.
It's a little hard to set up (Viper and set presets) but when you learn is easy do the same for all headphones.
Maybe it could help.
I recommend you remove that older process installation because you don't need to change SELinux from Enforcing to Permissive (insecure).
In Magisk
1. Install Audio Compatibility Patch (v2.3)
2. Options: Yes, No, Yes, No, Yes, Yes, Reset.
3. Install Audio Modification Library (v4.0), reboot.
4. Instalar Viper4Android FX Legacy v4.4 (v2.5.0.4)
5. Options: Vol +, Vol-, Vol-, Vol +, Reset.
6. Install the JamesDSP module.
7. Disable any native system / ROM equalizer.
Install Viper4Android FX app (v2.6.0.6, Jan/2019) via github or backup
Option: find out him here or Magisk folder (use any root explorer for that).
Path: /data/adb/Modules/Viper (old app)
For newest V4A app use search or Rose.
Choose driver 2.5.0.4, install, restart.
So open the player.
Open Viper4Android FX app, try to apply some profile. Close and open the app if necessary.
Your Headphone need to be plugged.
NOTE: Don't forget to disable other features sound installed on your ROM like stock equalizer (AudioFX, Dolby and other).
To work correctly the Driver Status screen must be:
Driver Version: 2.5.0.4
NEON Enable: Yes
Enable: Yes
Status: Normal
Audio Format: Supported
Processing: Yes
Sampling Rate: 48000
NOTE2: The Viper4Android folder saves the profiles in the root of the internal memory and they need to be replaced in case of Internal Storage was formatted.
I upload the files (older .apk and DDCs/Kernel) on my Mega
18.21 MB file on MEGA
mega.nz
There is some perfis that I did for my headphones (JBL, Xiaomi, Bluedio, Phillips and KZ). You can try them and use it as based to fix all what you need.
Change it to others device you will need just set "Master Gate (limiter)" to 0dB on Alioth.
All them was set for Gemini (this need to be Output Gain -8.0 db).
NOTE3: I prefer the older version and older design. Just the older design app works with the folder "Profile" on .zip without any conversion files.
The new layout migrates the folder "Profile" to "Preset" on new material design. This is not compatible.
NOTE4: Maybe just AML + FX Legacy or 2.7 + JamesDSP is enough. You can remove James app after installed his Module.
Techguy777 said:
It's going to seem like a lot of work but it's not. Your just going to download magisk files. First thing first you have root and I'm hoping your willing to switch your kernel to permissive mode? You can either do that with permissive v2 magisk module or selinux app. You need to have busybox from magisk installed.
Download 2.3.4 apk
1 switch selinux to permissive
2. Install BusyBox from magisk
Than reboot first
3. Install viper4android v4.4 on magisk manager use volume buttons to pick 2.3.4 install as a user app and if show recommended audio fix hit yes.
Reboot the device and see install the apk 2.3.4 and it should have the driver already installed.
If that doesn't work than you add James dsp magisk module new verison on magisk manager
Than flash audio modification file v4.0 after that
If you reboot again and reinstall the app and hopefully the driver will stick if it doesn't flash 4.4 zip again and reboot and install the apk.
You have to always reinstall the apk because the viper zip uninstalls it and it doesn't ever add it back likes supposed to but the driver stays installed and when you install the app shouldn't be no errors. You will need to grant storage permission for viper4android app.
It seems like a lot but it's really not and once it's installed properly it never uninstalls.
James dsp allows viper to play on phones for some reason but you can turn it off and just use viper that's what I do
https://drive.google.com/file/d/1kf02fMd-HDZp1SQkxk6wprZfbCv11eM2/view?usp=drivesdk
selinux_permissive_v2.0 (1).zip
drive.google.com
ViPER4Android FX(com.vipercn.viper4android_v2)-2.3.4.0(2340)-base.apk
drive.google.com
Trying to get all the files it's hard sometimes to find them so I'm saving you some time. 2.3.4 apk is impossible to find now I extracted the one I'm using
Click to expand...
Click to collapse
As I said, you don't need to alter SELinux permissions.
There is a method that you don't modify that.
alefmm said:
Always, much better than Dolby, AudioFX and others that I tested.
The "codecs" most important is DDC/Kernel (.vdc and .irs).
When I install them in 2019 liked ClearPlus HD.irs and V4ARISE.vdc.
It's a little hard to set up (Viper and set presets) but when you learn is easy do the same for all headphones.
Maybe it could help.
I recommend you remove that older process installation because you don't need to change SELinux from Enforcing to Permissive (insecure).
In Magisk
1. Install Audio Compatibility Patch (v2.3)
2. Options: Yes, Up, Yes, Up, Yes, No, Reboot.
3. Install Audio Modification Library (v4.0), reboot.
4. Install Viper4Android FX v2.7.2.1 (driver v2.5.0.4)
NOTE: Viper FX will install the latest app, finish installing Driver v2.5.0.4 on it and running (do some test to confirm).
Afterwards, remove the latest app and install the v2.6.0.6 app.
Install Viper4Android FX app (v2.6.0.6, Jan/2019), required download via github or backup.
Choose driver 2.5.0.4, install, restart.
So open the player.
Open Viper4Android FX app, try to apply some profile. Close and open the app if necessary.
Your Headphone need to be plugged.
NOTE: Don't forget to disable other features sound installed on your ROM like stock equalizer (AudioFX, Dolby and other).
To work correctly the Driver Status screen must be:
Driver Version: 2.5.0.4
NEON Enable: Yes
Enable: Yes
Status: Normal
Audio Format: Supported
Processing: Yes
Sampling Rate: 48000
NOTE2: The Viper4Android folder saves the profiles in the root of the internal memory and they need to be replaced in case of Internal Storage formatting.
I upload the files (older .apk and DDCs/Kernel) on my Mega
18.21 MB file on MEGA
mega.nz
There is some perfis that I did for my headphones (JBL, Xiaomi, Bluedio, Phillips). You can try them and use it as based to fix all what you need.
Change it to others device you will need just set "Master Gate (limiter)" to 0dB on Alioth.
All them was set for Gemini (this need to be Output Gain -8.0 db).
NOTE3: I prefer the older version and older design. Just the older design app works with the folder "Profile" on .zip. The new layout migrates the folder "Profile" to "Preset" on new material design. This is not compatible.
As I said, you don't need to alter SELinux permissions.
There is a method that you don't modify that.
Click to expand...
Click to collapse
You can convert all profile to new format with a magisk module. But here, I'm more interested in the old version 2.3.4.0 with the super driver, discontinued in the new versions
Greenspoof said:
You can convert all profile to new format with a magisk module. But here, I'm more interested in the old version 2.3.4.0 with the super driver, discontinued in the new versions
Click to expand...
Click to collapse
Does't work and duplicate profiles (older profiles, if you don't migrate will works idem).
As I said, I tested both and the most stable is Driver Version: 2.5.0.4 and Viper4Android FX app v2.6.0.6.
Doing it correct, you can allow quality more than 200% compared without it.