Hey guys I just received yurrka plus
I want to know what difference between yurrka and yurrka plus
And yurrka plus is running on stock KitKat so how to flash offical cm on it ?
Any help appreciated
Thanks for reading
The only big difference of yureka and yureka plus is the screen resolution which is 1280x720 for yureka and 1920x1080 for yureka plus.
First update the yureka plus to lollipop via ota update. Don't flash via fastboot as it will brick your device. Connect to wifi and check for updates. Do all the ota updates till the device reaches cyanogen os 12.1 and then you are good to go.
Once you are on cyanogen os 12.1 unlock the bootloader(it will wipe userdata) and fastboot flash custom recovery and then flash custom rom.
Related
Hello,
I am currently using Blisspop 4.0.1 on Yureka and want the device to be on Stock Cyanogen OS 12. Searched Yu Official Forum, here and google too but I cant seem to find exact steps required to do this over custom rom.
Can someone please help with the steps or point me to the link which has exactly same situation like mine ?
paramjeetgem said:
Hello,
I am currently using Blisspop 4.0.1 on Yureka and want the device to be on Stock Cyanogen OS 12. Searched Yu Official Forum, here and google too but I cant seem to find exact steps required to do this over custom rom.
Can someone please help with the steps or point me to the link which has exactly same situation like mine ?
Click to expand...
Click to collapse
in recovery-
clean data/dalvik/system/cache and then install flash this ROM
cm-12.0-YNG1TAS1K0-tomato-signed zip file from Yureka forum.
shashank1320 said:
in recovery-
clean data/dalvik/system/cache and then install flash this ROM
cm-12.0-YNG1TAS1K0-tomato-signed zip file from Yureka forum.
Click to expand...
Click to collapse
TWRP or stock cm recovery or anything will do..??
cksup said:
TWRP or stock cm recovery or anything will do..??
Click to expand...
Click to collapse
anyone will do. Better to go with TWRP latest and if you change your mind later to install some other latest custom ROMs, then you wont face any issue with inbuilt root permission with latest TWRP (as some of them not working on older TWRP) and also TWRP is better for the backup and restore as well.
Respected Dev/Experts
Please help me I'm confused with Yureka AO5510 & yu5510 vs 5510A my device is 5510A. My device hard bricked 3 times. Whenwhil I try to flash any cm ROM my touch screen works only half part(malfunctioning) please help me what should I flash for my Yureka 5510A device?
Reply As soon As Possible. Thanks in Advance.
Best Regards.:crying:
Please help me out dear....
I am also using yu5510a stock android variant and its hard bricked how did you unbricked your Yureka plus yu5510a from hard brick please tell me the procedure to unbrick my phone its totally dead ......:crying:
Volume up + attach data cable to connect in fastboot then Flash cyanogen using ygdp tool first then your model number shown 5510 .
Unlock bootloader and install twrp same commands.
Flash official 12.1 cyanogen signed .zip
Keep twrp alive.
Then install any custom ROM.
Thats it.
Not so simple not so difficult.
Always be ready to revive your handset from soft brick or hard brick.
Good luck.
nischait said:
Volume up + attach data cable to connect in fastboot then Flash cyanogen using ygdp tool first then your model number shown 5510 .
Unlock bootloader and install twrp same commands.
Flash official 12.1 cyanogen signed .zip
Keep twrp alive.
Then install any custom ROM.
Thats it.
Not so simple not so difficult.
Always be ready to revive your handset from soft brick or hard brick.
Good luck.
Click to expand...
Click to collapse
Are these instructions for new yureka 5510a? Have you tried this method?
Please provide links for cynogen to flash with ygdp tool and official 12.1 cynogen.
I have googled the instructions for 5510a but couldnt find anyrhing. Plz help... Thanks in advance.
harshgup said:
Are these instructions for new yureka 5510a? Have you tried this method?
Please provide links for cynogen to flash with ygdp tool and official 12.1 cynogen.
I have googled the instructions for 5510a but couldnt find anyrhing. Plz help... Thanks in advance.
Click to expand...
Click to collapse
http://forums.yuplaygod.com/threads/12-1-incremental-update-for-yureka-yureka-plus-yuphoria.38413/
Link
I post here about 5510A and I checked it on 5510a before post.
12.1 is flashable through recovery
From firmwarefile download first version which is Cyanogen after that unlock bootloader and install twrp and then flash 12.1 official
Be sure twrp should be alive if twrp lost you have to again install it.
After that download & install any custom ROM.
dhrtlockeroo9 said:
Respected Dev/Experts
Please help me I'm confused with Yureka AO5510 & yu5510 vs 5510A my device is 5510A. My device hard bricked 3 times. Whenwhil I try to flash any cm ROM my touch screen works only half part(malfunctioning) please help me what should I flash for my Yureka 5510A device?
Reply As soon As Possible. Thanks in Advance.
Best Regards.:crying:
Click to expand...
Click to collapse
which cm u flashed and from where u downloaded the cm??
just search the cm rom on youtube , u will find the perfect link.
better to flash the stock cm via fastboot
Hey guys ,
i am using pixel experience 8.1 right now and some where i read "you have to update your bootloader to flash new android pie roms i dont know my bootloader version plz help me ..?
note -- i flashed pixel experience 8.1 on indian Z2plus ZUI 2.0.093_ST_16081
hit and trial
affaan007 said:
Hey guys ,
i am using pixel experience 8.1 right now and some where i read "you have to update your bootloader to flash new android pie roms i dont know my bootloader version plz help me ..?
note -- i flashed pixel experience 8.1 on indian Z2plus ZUI 2.0.093_ST_16081
Click to expand...
Click to collapse
i suggest you to try flashing the new roms and in case you get a blue screen , qfil latest firmware to update bootloader , i dont think theres another way to check the bootloader version .
And dont worry getting a blue screen wont brick the device or anything , if you get it just boot back to twrp and follow the procedure for updating the bootloader through qfil (there are plenty of instructions available ,read em carefully and you will be fine).
PS: you need an updated bootloader only for roms which ship with latest kernel 4.4 and not 3.18 .
so yeah you can try pie roms which have 3.18 kernel without hesitation.
Also keep in mind that if you do decide to update the bootloader and flash roms with latest kernel , you need to flash vendortofactory.zip and new factory twrp due to new implementation so DO READ THE INSTRUCTIONS CAREFULLY IN THE THREAD OF WHATEVER ROM YOU FLASH !
Mine is 3.18 kernal I guess I have to update my bootloader using qfil if want to flash pixel experience 9 pie
Can you send me the link for required files to update bootloader thanks ?
affaan007 said:
Hey guys ,
i am using pixel experience 8.1 right now and some where i read "you have to update your bootloader to flash new android pie roms i dont know my bootloader version plz help me ..?
note -- i flashed pixel experience 8.1 on indian Z2plus ZUI 2.0.093_ST_16081
Click to expand...
Click to collapse
I've needed to update to ZUI 4.0 before installing Android 9.0 Pie ROMs.
Hello, am new to pixel device... My previous device was Xiaomi Mi 11 , my device carne with A13 !my question is there any way to downgrade to A12 I want to flash derfest A12 my fav ROM .. thx in advance
Hello, welcome to Pixel land.
First, in order to flash a factory image, you'd have to unlock your bootloader. If you don't know already, click the yellow How To Guide quick filter at the top of the list of threads in this section and you'll find 3-4 threads that tell how. I also have a link in my signature below - you can use the link for the Pixel 7 Pro - the instructions to unlock the bootloader are the same, and the OP of my Pixel 7 Pro thread is much better organized than my one for the Pixel 6 Pro, in my opinion.
After that, the only way you can downgrade (and have everything working, and not brick your phone is to use one of the two Android 12 Developer Support images for Pixel. There's an Android 12.0 build from February and an Android 12.1 build from July. They will never receive updates, however.
You can always manually flash a Pixel 6 Pro stable Factory Image to re-upgrade at a later date, or use the Official Google Android Flash Tool (OEM Unlocking needs to be toggled on - you may not have to manually unlock the bootloader - the "site" will do that on its own) to re-upgrade.
Any of the stable Android 12 builds at that factory image link should not be flashed because the Android 13 bootloader cannot be downgraded to an Android 12 bootloader, and if you flash everything from 12 Stable but the bootloader, it'll appear to work at first, but it truly won't work correctly - it will not be useable.
If you unlock the bootloader, you should also make sure the Android 13 bootloader is flashed to your inactive slot as well, to avoid the possibility of accidentally bricking your new phone.
Thanks for the fast reply sir much appreciated .. I got the idea ... My device stock unlocked and rooted .. now my question is if I flashed the July A12.1 developer ... Can I flash custom ROM based on A12.1 like derpfest etc ... Sorry I mixed up things here little harder than xiaomi
Antidote03 said:
Thanks for the fast reply sir much appreciated .. I got the idea ... My device stock unlocked and rooted .. now my question is if I flashed the July A12.1 developer ... Can I flash custom ROM based on A12.1 like derpfest etc ... Sorry I mixed up things here little harder than xiaomi
Click to expand...
Click to collapse
You're welcome. I don't fool around with custom ROMs except on my 6-year-old or more phones, so I can't answer that question. Part of the best things about having Pixels is the software features Google starts off exclusively on the Pixel stock ROMs.
hello developers
due to Android security update version of miui roms are changed such as miui 14.0.2 to miui 4.0.3. so base version boot image is enough (14.0.2) for magisk root or need update (14.0.3) boot image for magisk root.
i m asking such questions bcz updated fastboot rom is not available on official website...
thanks