Hello everyone, today I present my new creation: we are talking about a tool that allows you to do many things , from the bootloader to flash the factory image , comfortably. Now you're probably asking: but there are already other tools available , why use it? I 'll explain it: this tool currently supports 13 devices of different companies and all the controls have been tailored to each device .
TOOL ALL IN ONE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ADVANCED OPTIONS
FUNCTIONS
Install Drivers
Unlock Bootloader
Lock Bootloader
Flash TWRP Recovery
Flash Stock Recovery
Flash Stock Factory Image
Reboot Phone
Update the Tool to last version
Delete downloaded files
DEVICE LIST
Oneplus 3T (Stock firmware not found for now)
Oneplus 3
Oneplus Two
Oneplus One
Oneplus X (Stock Firmware not found for now)
ZUK Z2 PRO (Stock firmware and recoveries not found for now)
ZUK Z2 (Stock firmware and recoveries not found for now)
ZUK Z1
Nexus 4
Nexus 5
Nexus 5X
Nexus 6
Nexus 6P
NOTE
I could not test all the controls, because they are really a lot, I did some tests and everything seems to work. I added a button "Delete File " in the case when downloading some files you have problems, you can delete the corrupted files directly from the tool instead of going to look for it manually.
Before using the tool, make sure that you have turned the oem unlocking, usb debugging and you reboot your device in Fastboot-Bootloader mode.
If you flash a Factory Image, all your data will be erased.
Use "Lock" only when you're certain that the Stock ROM functions properly.
If you have any problems during installation then first try to update the Microsoft Net freamwork to latest version:
https://www.microsoft.com/it-it/download/details.aspx?id=30653
HOW TO INSTALL
Download .zip file;
Extract all its contents into a folder;
Click on setup.exe;
Click on "Install";
Waiting for the end of the process;
Enjoy your tool
UPDATE
There will be no need to re-download the new tool, but just look for new updates directly from the tool.
In all cases I'll update the link in this thread and report it when there are new updates with its changelog. (If you have some problem during the update, press continue)
CHANGELOG
#1.0.0.7
Added official OPT recovery;
Added official ZZ1 recovery;
Solved some bug.
#1.0.0.9
Solved OPT bug on stock firmware;
#1.0.1.2
Add some download links
#1.0.1.3
Add new rom;
Solved some bugfix.
#1.0.1.5
Add OnePlus 3 support;
#1.0.1.6
Add new download links;
Add some new stock roms;
Add restore stock boot logo for ZUK Z1 ( you find it on "Flash stock fimrware").
#1.0.1.9
Add new "Advanced Options", i add a screen with all possible fuctions above;
I have changed some protocol (TWRP and Stock Recovery);
Add Oneplus 3 stock recovery.
#1.0.2.0
Add new "Generic" option to advanced settings (if you want to install a custom recovery or some else on an unsupported device you can try);
I have changed some protocol (Factory image and drivers);
Add Oneplus 3 Stock Faactory Image ( i have not tested it, if you test it please make me a fedback).
#1.0.2.1
Added official OnePlus 3 TWRp recovery;
Added last OnePlus One Factory Image;
Generic Bufix.
#1.0.2.2
Added Zuk z2 and zuk z2 pro.
#1.0.2.3
Added Zuk z2 and zuk z2 pro TWRP recovery;
Added new universal drivers;
General Bugfix.
#1.0.2.4
Added new Fastboot and Adb app (If zuk users have some problem try to unistall the tool and install the last through download link);
New UI;
General Bugfix.
#1.0.2.5
Added OnePlus 3T support;
Added OnePlus 3T TWRP;
General Bugfix.
#1.0.2.6
Added last ZUK Drivers;
Fixed Nexus Factory Image;
Fixed OnePlus Factory Image;
Fixed ZUK Z1 Factory Image;
Added newest Nexus Factory Image;
Added last OnePlus One Factory Image;
Added OnePlus 3 TWRP 3.0.2-1.28 recovery;
Added OnePlus 3T TWRP 3.0.2-0 recovery;
Added OnePlus 3T stock recovery;
General BugFix.
CONTACTS
If you think it necessary to add new features or other recovery or other Factory Image or you want to add a new device support please comments or send me a private message or send me an email to [email protected] (If you want to add support for additional device, please send me the link to download important files (recovery,factory image, ... ) or links to guides on the device(unlock bootloader) or anything that may serve me).
DOWNLOAD
TOOL ALL IN ONE
( Alternative Link )
DONATE LINK
If you want to support the project please consider making a donation, thanks.
DONATORS
- Alberto Pettenò: 2.00 €
- Oliver E. : 3.50 €
- Tunde Alabi: 10.00 $
- Giovanni MacCelli: 5.00 €
- Cristian Godnik: 5.00 €
- Luca Milkovitsch: 5.00 €
- Nicolò Rossini: 2.00 €
- Luigi Pedrini: 1.00 €
- Oscar Davi: 5.00 €
- Claudio Orititi: 2.50 €
- James Goldsbury: 3.00 $
- Abel Varela Carou: 2.00 €
- Juan Carlos Cuevas Barreira: 5.00 €
- scooterofficina: 1.00 €
- Paul Moore: 3.00 GPB
- Mattia Colle: 1.00 €
- Maryan Komar: 2.00 €
- Luigi Ardizzone: 1.00 €
- Maximo76: 10.00 €
- Loïc Payol: 13.37 €
- Antonio Rateni: 2.00 €
- Matteo Verzella: 0.50 €
- Lukas Heddendorp: 2.00 €
- Scott Dare: 5.00 €
- Leonardo F. : 3.00 €
- Andrea Tassotti: 5.00 €
- Stefano Franceschini: 1.00 €
- Евгений Сериков: 1.00 €
- Stian Domben Bardsen: 20.00 €
- Kevin Dang: 2.00 $
- David Lebrun: 5.00 €
- James Hise: 15.00 €
- Daniele Barbana: 0.40 €
- Christophe Van B. : 2.50 €
- Robert Möller: 10.00 €
- Johannes Fleischmann: 5.00 €
- Marco Rigoni: 10.00 €
- Pasquale Rivieccio: 2.00 €
- Jorge Toledo: 5.00 €
- ionel firuti: 10.00 €
- Argel Thulin: 2.00 €
- Tim Altmann: 1.00 €
- Christoph Hackl: 2.00 €
- Joel Vazquez: 10.00 $
- Tommaso Tautonico: 1.00 €
- Fabio Vannoni: 4.50 €
- Willy Andresen: 10.00 $
- Antonino Muscarella: 1.00 €
- Каширин Михаил: 1.00 ₽
- Pietro Brasile: 2.00 €
- Giorgio Frasca: 5.00 €
- Andrea Della Verde: 1.00 €
- RAFAL SZALKA: 2.00 GPB
- marco da silva: 2.00 €
- Jose Rodriguez Martinez Z: 1.00 €
- Francesco Rizzo: 1.00 €
- Lorenzo Stronati: 2.50 €
- Brian Salerno: 15.00 $
- Alois Seelwische: 4.50 €
- K & J Cooper Proper: 5.00 €
- Janis Jemeljanovs: 5.00 €
Really thanks to donators
mauronofrio said:
Hello everyone, today I present my new creation: we are talking about a tool that allows you to do many things , from the bootloader to flash the factory image , comfortably. Now you're probably asking: but there are already other tools available , why use it? I 'll explain it: this tool currently supports 9 devices of different companies and all the controls have been tailored to each device .
FUCTIONS:
Install Drivers
Unlock Bootloader
Lock Bootloader
Flash TWRP Recovery
Flash Stock Recovery
Flash Stock Factory Image
Reboot Phone
Update the Tool to last version
Delete files downloaded
DEVICE LIST:
Oneplus Two
Oneplus One
Oneplus X
ZUK Z1
Nexus 4
Nexus 5
Nexus 5X
Nexus 6
Nexus 6P
NOTE:
I could not test all the controls, because they are really a lot, I did some tests and everything seems to work. I added a button "Delete File " in the case when downloading some files you have problems, you can delete the corrupted files directly from the tool instead of going to look for it manually.
Before using the tool, make sure that you have turned the oem unlocking, usb debugging and you reboot your device in Fastboot-Bootloader mode.
If you flash a Factory Image, all your data will be erased.
Use "Lock" only when you're certain that the Stock ROM functions properly.
HOW TO INSTALL (There is nothing easier):
Download .zip file;
Extract all its contents into a folder;
Click on setup.exe;
Click on "Install";
Waiting for the end of the process;
Enjoy your tool
UPDATE:
There will be no need to re-download the new tool, but just look for new updates directly from the tool.
In all cases I'll update the link in this thread and report it when there are new updates with its changelog.
CONTACTS:
If you think it necessary to add new features or other recovery or other Factory Image or you want to add a new device support please comments or send me a private message or send me an email to [email protected] (If you want to add support for additional device, please send me the link to download important files (recovery,factory image, ... ) or links to guides on the device(unlock bootloader) or anything that may serve me).
DOWNLOAD
TOOL_ALL_IN_ONE
DONATE LINK:
Click to expand...
Click to collapse
Seems like a handy tool for a new person looking to get into rooting their phone. Good job!
Looks really nice! Though I don't need it, I will definitely keep it in mind for helping new people to root!
I have test it ,works fine!
Gesendet von meinem unknown mit Tapatalk
i am stock oos3.0(beta build) will this tool help me to root and unlock bootloader of my op2
abhij97 said:
i am stock oos3.0(beta build) will this tool help me to root and unlock bootloader of my op2
Click to expand...
Click to collapse
It doesn't mention rooting in the first post so I guess not.
Also, since the OP2 uses different versions of TWRP for OOS2 & OOS3, you'd need to check with the OP that the correct version is installed for each rom.
Spannaa said:
It doesn't mention rooting in the first post so I guess not.
Also, since the OP2 uses different versions of TWRP for OOS2 & OOS3, you'd need to check with the OP that the correct version is installed for each rom.
Click to expand...
Click to collapse
all TWRP avible in in the tool, you can unlock bootloader but you cant install root
Great work .will help ppl with soft and hard brick .nice work will sure keep this passing to new ppl who wanna flash but affaraid of bricking devices .thanks
Sent from my ONE A2003 using XDA-Developers mobile app
I keep trying to flash the flash stock firmware but keep getting a message saying select firmware
m0bstr said:
I keep trying to flash the flash stock firmware but keep getting a message saying select firmware
Click to expand...
Click to collapse
sorry man, i make an error and i fix it now, please update and then try to return stock
mauronofrio said:
sorry man, i make an error and i fix it now, please update and then try to return stock
Click to expand...
Click to collapse
I updated it and now it wont open,
Application cannot be started, please contact vendor
m0bstr said:
I updated it and now it wont open,
Application cannot be started, please contact vendor
Click to expand...
Click to collapse
What? I make the update and i have not problem, try to unistall the tool that you have installed and you install last tool, the first have a little problem with updater
I reinstalled and its downloading now, but I get an error at the beginning and click continue and it works
m0bstr said:
I reinstalled and its downloading now, but I get an error at the beginning and click continue and it works
Click to expand...
Click to collapse
ok
Hi there,need a hand,after trying to flash Skydragon rom but something went wrong and now i can only managed to go to fast boot,tried with Tool all In One to flash the original rom or other Recovery with no result,can someone give me a hint?,thanks
the error is this:
target reported max download size of 536870912 bytes
sending 'recovery' (31381 KB)...
OKAY [ 1.025s]
writing 'recovery'...
OKAY [ 0.248s]
finished. total time: 1.275s
downloading 'boot.img'...
OKAY [ 1.034s]
booting...
FAILED (remote: dtb not found)
finished. total time: 1.101s
Press any key to continue . . .
pbls said:
Hi there,need a hand,after trying to flash Skydragon rom but something went wrong and now i can only managed to go to fast boot,tried with Tool all In One to flash the original rom or other Recovery with no result,can someone give me a hint?,thanks
the error is this:
target reported max download size of 536870912 bytes
sending 'recovery' (31381 KB)...
OKAY [ 1.025s]
writing 'recovery'...
OKAY [ 0.248s]
finished. total time: 1.275s
downloading 'boot.img'...
OKAY [ 1.034s]
booting...
FAILED (remote: dtb not found)
finished. total time: 1.101s
Press any key to continue . . .
Click to expand...
Click to collapse
Hey you have probably fixed your problem by now but if you haven't try and do a factory reset then immediately flash what you want to install. I had the same error you had and this worked for me.
pbls said:
Hi there,need a hand,after trying to flash Skydragon rom but something went wrong and now i can only managed to go to fast boot,tried with Tool all In One to flash the original rom or other Recovery with no result,can someone give me a hint?,thanks
the error is this:
target reported max download size of 536870912 bytes
sending 'recovery' (31381 KB)...
OKAY [ 1.025s]
writing 'recovery'...
OKAY [ 0.248s]
finished. total time: 1.275s
downloading 'boot.img'...
OKAY [ 1.034s]
booting...
FAILED (remote: dtb not found)
finished. total time: 1.101s
Press any key to continue . . .
Click to expand...
Click to collapse
I don't know, try to delete recovery and redownload it, maybe you have a corrupt file
@mauronofrio
Attach is the screen what I get when trying to flash stock FW.
then phone stays on boot screen.
Ideas?
jukyO said:
@mauronofrio
Attach is the screen what I get when trying to flash stock FW.
then phone stays on boot screen.
Ideas?
Click to expand...
Click to collapse
you have not odwnload the rom, please click on "delete file" and delete only stock firmware and then remake the flash stock
mauronofrio said:
you have not odwnload the rom, please click on "delete file" and delete only stock firmware and then remake the flash stock
Click to expand...
Click to collapse
R: you have not odwnload the rom,
A: I have downloaded the ROM through your application.
R: please click on "delete file" and delete only stock firmware
When I do it Offers those:
Code:
Choose which files you want to delete (Insert upper-case letter):
Drivers, Are you sure (Y/N)? N
Factory_image, Are you sure (Y/N)? N
Stock_recovery, Are you sure (Y/N)? N
TWRP_recovery, Are you sure (Y/N)? N
So no Stock Firmware offered.
What went wrong?
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After my first tool ( Hboot Firmware Flasher ) i've decided to add some useful functions for Linux and Mac Users .
i'm happy to present to you : Ultimate Firmware Flasher!
As always, you use this tool at your own risk
Windows Version 4.0.0 Uploaded :highfive:
( if you have some questions about the Code, ask me with a private message )
V.3.0.0 for WIN removed due to coding error(D'OH!)
V4.0.0 for WIN:
replaced buttons with listbox in the main window ( thanks hasoon2000 :highfive
added menu with useful link on top of the window
Fixed Coding error! Now all should work properly :good:
Update V4.1.0 :
code cleaned a bit
added XDA quick links for Roms/kernels/recoveries
Windows Features:
Fastboot: Flash options
Fastboot Erase options
Fastboot: Getvar options
Fastboot: OEM options
Firmware Upgrade
ADB: Pull
ADB: Push
ADB : Sideload
ADB: backup ( data, system, sdcard, restore backup)
ADB: Advanced Options:
- reboot
- reboot bootloader
- reboot recovery
- install apk
- get cpu frequencies
- get cpu Governors
- logcat
- dumpsys
- dumpstate
- dsmeg
- start adb serve
- kill adb server
- start adb shell
More to come...
Click to expand...
Click to collapse
Screnshot:
Firmware Upgrade utility will work only if you have one of the following CIDs:
Check this thread for firmware downloads: http://forum.xda-developers.com/showthread.php?t=1957376[/QUOTE]
Mac and Linux Features:
Fastboot tools:
Flash recovery.img
Flash boot.img
erase cache partition
erase data partition
erase system partition
erase boot partition
reboot bootloader
reboot
Getvar options:
version
version-bootloader
version-baseband
version-cpld
version-microp
version-main (or "mainver")
serialno
product
platform
mid (or "modelid")
cid (or "cidnum")
battery-status
battery-voltage
partition-layout
security
build-mode
boot-mode
commitno-bootloader
version-tp
hbootpreupdate
Oem Options: ( Use ONLY if you know what you are doing )
get_identifier_token
keytest
heap
boot
reset
powerdown
rebootRUU
heap_test
klog
ats
rtask
task
enableqxdm
gencheckpt
readpid
writepid
readcid
writecid
readimei
readsecureflag
writesecureflag
lock
Adb tools:
reboot recovery
reboot bootloader
reboot
adb pull
adb push
adb full backup
adb data backup
SDcard backup
restore adb backup
get available cpu frequencies
get available governors
adb devices
Logcat
Dumpsys
dumpstate
dsmeg
install apk
get device serial number ( like devices)
get state ( like devices)
start adb server
kill adb server
remount
adb shell
Firmware Upgrade:
check if cid is in the compatible cid list
if it can't get cid using Getvar cid it will try with oem readcid
check battery status for a secure upgrade
relock bootloader
flash firmware
reflash firmware
unlock bootloader
flash recovery
flash boot.img
Unlock/Lock bootloader
Click to expand...
Click to collapse
How To:
for MAC Users V3:
install Xcode : https://developer.apple.com/technologies/tools/
install X11 : http://xquartz.macosforge.org/trac
install Xcode command line tools : open Xcode , go to Downloads and install Command line tools
Download Fink_Install.zip that i've made for install fink and zenity port : https://docs.google.com/open?id=0BxhXoOizKZSkY0VyM1BnSVZrN0U
run finkinstall.sh in terminal and follow the instructions
Now you can run my tool ( zen_UFF)
Click to expand...
Click to collapse
for LINUX Users V3:
install zenity package from repo of your distribution
run the tool ( zen_UFF)
Click to expand...
Click to collapse
For previous versions:
download the archive for your OS and unpack where you want
open terminal and do : chmod 777 UFF_xxx.sh ( xxx= Mac or Linux )
run UFF_xxx.sh
Click to expand...
Click to collapse
Thread on Androidiani.com : http://www.androidiani.com/forum/ht...firmware-flasher-mac-linux-24-oct-v1-0-a.html
Click to expand...
Click to collapse
Changelog:
Code:
[B]V3: [/B]: re-wrote the whole code, Now it uses Zenity for a simple GUI
added ADB Sideload
added Kernel Tools ( Unpack-Repack - BETA)
[B]V1.0 : [/B]all the changes made in Hboot firmware flasher and added HUGE collection of functions
[B]V1.1 :[/B] Fixed syntax error ( D'oh! )
------- Added: available Cpu Frequencies (adb tools)
------- Added: available governors (adb tools)
[B]V2.0:[/B] added MOAR adb and fastboot commands
[B]ADB:[/B]
[LIST]
[*]get available cpu frequencies
[*]get available governors
[*]adb devices
[*]Logcat
[*]Dumpsys
[*]dumpstate
[*]dsmeg
[*]install apk
[*]get device serial number ( like devices)
[*]get state ( like devices)
[*]start adb server
[*]kill adb server
[*]remount
[*]adb shell
[/LIST]
[B]Fastboot:[/B]
[B]getvar options: [/B]
[LIST]
[*]version
[*]version-bootloader
[*]version-baseband
[*]version-cpld
[*]version-microp
[*]version-main (or "mainver")
[*]serialno
[*]product
[*]platform
[*]mid (or "modelid")
[*]cid (or "cidnum")
[*]battery-status
[*]battery-voltage
[*]partition-layout
[*]security
[*]build-mode
[*]boot-mode
[*]commitno-bootloader
[*]version-tp
[*]hbootpreupdate
[/LIST]
[B]Oem options:[/B]
[LIST]
[*]get_identifier_token
[*]keytest
[*]heap
[*]boot
[*]reset
[*]powerdown
[*]rebootRUU
[*]heap_test
[*]klog
[*]ats
[*]rtask
[*]task
[*]enableqxdm
[*]gencheckpt
[*]readpid
[*]writepid
[*]readcid
[*]writecid
[*]readimei
[*]readsecureflag
[*]writesecureflag
[*]lock
[/LIST]
Click to expand...
Click to collapse
Download:
Windows: Ultimate_firmware_Flasher_WIN_V4.1.0.rar
Mac Latest V3 : Ultimate_Firmware_Flasher_mac_V3.zip
Linux Latest V3 : Ultimate_Firmware_flasher_linux_V3.zip
Mac previous: Ultimate_FirmwareFlasher_OneX_MAC_2.0.zip
Linux previous:Ultimate_FirmwareFlasher_OneX_LINUX_2.0.zip
Click to expand...
Click to collapse
Special thanks:
Autoit3: Forum and IDE
William Enck for Boot.img tools
Xda Devs for their amazing work
htc for the amazing device ( Reminder for Htc: We need that **#[email protected]&-!*#@** S-OFF!! )
Click to expand...
Click to collapse
Have Fun!
downloading
thanks man
New Version Uploaded! :good:
i've added ALL the adb and fastboot available commands ( i think! roftl )
thanks man! worked like a charm. from stock unrooted hboot 1.12 to JB ordroid hboot 1.31
Guids said:
thanks man! worked like a charm. from stock unrooted hboot 1.12 to JB ordroid hboot 1.31
Click to expand...
Click to collapse
Good to see that it worked for you
can you add ./adb sideload path/to/zip ?
and thanks for this amazing tool
Salbawardi2 said:
can you add ./adb sideload path/to/zip ?
and thanks for this amazing tool
Click to expand...
Click to collapse
I will add it as soon as i can!
Now i'm trying to make a simple GUI with Zenity :fingers-crossed:
xcesco89 said:
I will add it as soon as i can!
Now i'm trying to make a simple GUI with Zenity :fingers-crossed:
Click to expand...
Click to collapse
Uploaded new version!
Now it has a simple GUI made with Zenity
added ADB sideload and a little tool for unpack and repack kernels ( still beta ) . the Kernel tool will self compile mkbootimg for your OS only the first time you run it
xcesco89 said:
Uploaded new version!
Now it has a simple GUI made with Zenity
added ADB sideload and a little tool for unpack and repack kernels ( still beta ) . the Kernel tool will self compile mkbootimg for your OS only the first time you run it
Click to expand...
Click to collapse
downloading and trying
thanks man
Brilliant!
Sent from my HTC One X using xda premium
if you can add a sign tool it would very great
because the biggest problem with me is signing zip
Salbawardi2 said:
if you can add a sign tool it would very great
because the biggest problem with me is signing zip
Click to expand...
Click to collapse
thanks for the suggestion, i will add it soon
but, i've a little question: why you need to sign zips?
if you have a custom recovery you can simply disable the signature check
xcesco89 said:
thanks for the suggestion, i will add it soon
but, i've a little question: why you need to sign zips?
if you have a custom recovery you can simply disable the signature check
Click to expand...
Click to collapse
didn't know !!!!!
thanks agan
Salbawardi2 said:
didn't know !!!!!
thanks agan
Click to expand...
Click to collapse
thank you for testing my stuff
here is a little preview of what i'm trying to do now:
but i think this will take some time ( and i hate Windows )
Windows Version 1.0.0 Uploaded! :highfive:
Download link in the OP
thanks a lot for your fantastic work!!! :good: :good: :good:
Download Fink_Install.zip that i've made for install fink and zenity port : https://docs.google.com/open?id=0Bxh...0VyM1BnSVZrN0U
run finkinstall.sh in terminal and follow the instructions
Click to expand...
Click to collapse
didnt work properly
Salbawardi2 said:
didnt work properly
Click to expand...
Click to collapse
hmmm.... i will take a look at that tomorrow
shortly, this is what you need to do:
- install fink following instructions on fink site
- update fink packages list ( i think this is in the installation instructions on fink site too)
- install Zenity using "sudo fink install zenity" ( without quotes)
fink will download and install all needed packages for zenity !
as mentioned in the OP, you need X11 , Xcode and Xcode command line tools installed
i'm searching a Good IDE for develop the mac app. i Hate Xcode
Guids said:
thanks man! worked like a charm. from stock unrooted hboot 1.12 to JB ordroid hboot 1.31
Click to expand...
Click to collapse
Did you upgrade ur hboot version with this tool?
fahad123 said:
Did you upgrade ur hboot version with this tool?
Click to expand...
Click to collapse
Are you kidding me? D:
Inviato dal mio HTC One X con Tapatalk 2
This is my latest creation. Easy to use, it has been created to support all devices compatible with fastboot and adb. Currently, only some basic functions are available, coming soon many more commands
Universal Fastboot & Adb Tool
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FUNCTIONS
Install Drivers
Unlock Bootloader
Flash Recovery
Reboot Phone (from anywhere to anywhere)
Update the Tool to last version
Complete Wipe from Fastboot
Open a cmd window with fastboot and adb privileged
NOTE
This is the first release and it can have some bug. If you find some bug tell me with a pm or a comment
Before using the tool, make sure that you have turned the oem unlocking, usb debugging.
If you have any problems during installation then first try to update the Microsoft Net freamwork to latest version:
https://www.microsoft.com/it-it/download/details.aspx?id=30653
HOW TO INSTALL
Download .zip file;
Extract all its contents into a folder;
Click on setup.exe;
Click on "Install";
Waiting for the end of the process;
Enjoy your tool
UPDATE
There will be no need to re-download the new tool, but just look for new updates directly from the tool.
In all cases I'll update the link in this thread and report it when there are new updates with its changelog.
(If you have some error during the update, please click continue and if you have some problems after an update please try to unistall the tool and install the lastest tool avaible)
CHANGELOG
#1.0.0.0
Initial Release
#1.0.0.1
Added Huawei Unlock Bootloader support
Added Sony Unlock Bootloader support
Added Some Other Commands (now you can open a free cmd window with fastboot and adb privileged)
General Bugfix.
#1.0.0.2
Added new Fastboot and Adb .exe;
Removed Vendor ID option ( with new Fastboot and Adb .exe is not necessary);
Fix flash recovery and boot;
General Bugfix.
CONTACTS
If you think it necessary to add new features please comments or send me a private message or send me an email to [email protected]
DOWNLOAD
Universal Fastboot & Adb Tool
( Alternative Link )
DONATE LINK
If you want to support the project please consider making a donation, thanks (If you make a donation, please tell me for what tool you have made it).
DONATORS:
- Alberto Pettenò: 2.00 €
- Oliver E. : 3.50 €
- Tunde Alabi: 10.00 $
- Giovanni MacCelli: 5.00 €
- Cristian Godnik: 5.00 €
- Luca Milkovitsch: 5.00 €
- Nicolò Rossini: 2.00 €
- Luigi Pedrini: 1.00 €
- Oscar Davi: 5.00 €
- Claudio Orititi: 2.50 €
- James Goldsbury: 3.00 $
- Abel Varela Carou: 2.00 €
- Juan Carlos Cuevas Barreira: 5.00 €
- scooterofficina: 1.00 €
- Paul Moore: 3.00 GPB
- Mattia Colle: 1.00 €
- Maryan Komar: 2.00 €
- Luigi Ardizzone: 1.00 €
- Maximo76: 10.00 €
- Loïc Payol: 13.37 €
- Antonio Rateni: 2.00 €
- Matteo Verzella: 0.50 €
- Lukas Heddendorp: 2.00 €
- Scott Dare: 5.00 €
- Leonardo F. : 3.00 €
- Andrea Tassotti: 5.00 €
- Stefano Franceschini: 1.00 €
- Евгений Сериков: 1.00 €
- Stian Domben Bardsen: 20.00 €
- Kevin Dang: 2.00 $
- David Lebrun: 5.00 €
- James Hise: 15.00 €
- Daniele Barbana: 0.40 €
- Christophe Van B. : 2.50 €
- Robert Möller: 10.00 €
- Johannes Fleischmann: 5.00 €
- Marco Rigoni: 10.00 €
- Pasquale Rivieccio: 2.00 €
- Jorge Toledo: 5.00 €
- ionel firuti: 10.00 €
- Argel Thulin: 2.00 €
- Tim Altmann: 1.00 €
- Christoph Hackl: 2.00 €
- Joel Vazquez: 10.00 $
- Tommaso Tautonico: 1.00 €
- Fabio Vannoni: 4.50 €
- Willy Andresen: 10.00 $
- Antonino Muscarella: 1.00 €
- Каширин Михаил: 1.00 ₽
- Pietro Brasile: 2.00 €
- Giorgio Frasca: 5.00 €
- Andrea Della Verde: 1.00 €
- RAFAL SZALKA: 2.00 GPB
- marco da silva: 2.00 €
- Jose Rodriguez Martinez Z: 1.00 €
- Francesco Rizzo: 1.00 €
Really thanks to donators
Install Drivers doesnt work.
tasar said:
Install Drivers doesnt work.
Click to expand...
Click to collapse
you are the only one that doesn't work
tasar said:
Install Drivers doesnt work.
Click to expand...
Click to collapse
Have U Enabled Android Debugging?
mauronofrio said:
you are the only one that doesn't work
Click to expand...
Click to collapse
And the only one who use it when i see the many posts here
Krsambhav16 said:
Have U Enabled Android Debugging?
Click to expand...
Click to collapse
Yes.
but problem has solved, phone is sold ...
tasar said:
And the only one who use it when i see the many posts here
Yes.
but problem has solved, phone is sold ...
Click to expand...
Click to collapse
There a total of 1200 download i think you are not the one that try it
Thread closed, please use the central thread below:
[TOOL] Universal Fastboot & Adb Tool
Thanks,
Darth
Senior Moderator
This is my latest creation. Easy to use, it has been created to support all devices compatible with fastboot and adb. Currently, only some basic functions are available, coming soon many more commands
Universal Fastboot & Adb Tool
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FUNCTIONS
Install Drivers
Unlock Bootloader
Flash Recovery
Reboot Phone (from anywhere to anywhere)
Update the Tool to last version
Complete Wipe from Fastboot
Open a cmd window with fastboot and adb privileged
NOTE
This is the first release and it can have some bug. If you find some bug tell me with a pm or a comment
Before using the tool, make sure that you have turned the oem unlocking, usb debugging.
If you have any problems during installation then first try to update the Microsoft Net freamwork to latest version:
https://www.microsoft.com/it-it/download/details.aspx?id=30653
HOW TO INSTALL
Download .zip file;
Extract all its contents into a folder;
Click on setup.exe;
Click on "Install";
Waiting for the end of the process;
Enjoy your tool
UPDATE
There will be no need to re-download the new tool, but just look for new updates directly from the tool.
In all cases I'll update the link in this thread and report it when there are new updates with its changelog.
(If you have some error during the update, please click continue and if you have some problems after an update please try to unistall the tool and install the lastest tool avaible)
CHANGELOG
#1.0.0.0
Initial Release
#1.0.0.1
Added Huawei Unlock Bootloader support
Added Sony Unlock Bootloader support
Added Some Other Commands (now you can open a free cmd window with fastboot and adb privileged)
General Bugfix.
#1.0.0.2
Added new Fastboot and Adb .exe;
Removed Vendor ID option ( with new Fastboot and Adb .exe is not necessary);
Fix flash recovery and boot;
General Bugfix.
CONTACTS
If you think it necessary to add new features please comments or send me a private message or send me an email to [email protected]
DOWNLOAD
Universal Fastboot & Adb Tool
( Alternative Link )
DONATE LINK
If you want to support the project please consider making a donation, thanks (If you make a donation, please tell me for what tool you have made it).
DONATORS:
- Alberto Pettenò: 2.00 €
- Oliver E. : 3.50 €
- Tunde Alabi: 10.00 $
- Giovanni MacCelli: 5.00 €
- Cristian Godnik: 5.00 €
- Luca Milkovitsch: 5.00 €
- Nicolò Rossini: 2.00 €
- Luigi Pedrini: 1.00 €
- Oscar Davi: 5.00 €
- Claudio Orititi: 2.50 €
- James Goldsbury: 3.00 $
- Abel Varela Carou: 2.00 €
- Juan Carlos Cuevas Barreira: 5.00 €
- scooterofficina: 1.00 €
- Paul Moore: 3.00 GPB
- Mattia Colle: 1.00 €
- Maryan Komar: 2.00 €
- Luigi Ardizzone: 1.00 €
- Maximo76: 10.00 €
- Loïc Payol: 13.37 €
- Antonio Rateni: 2.00 €
- Matteo Verzella: 0.50 €
- Lukas Heddendorp: 2.00 €
- Scott Dare: 5.00 €
- Leonardo F. : 3.00 €
- Andrea Tassotti: 5.00 €
- Stefano Franceschini: 1.00 €
- Евгений Сериков: 1.00 €
- Stian Domben Bardsen: 20.00 €
- Kevin Dang: 2.00 $
- David Lebrun: 5.00 €
- James Hise: 15.00 €
- Daniele Barbana: 0.40 €
- Christophe Van B. : 2.50 €
- Robert Möller: 10.00 €
- Johannes Fleischmann: 5.00 €
- Marco Rigoni: 10.00 €
- Pasquale Rivieccio: 2.00 €
- Jorge Toledo: 5.00 €
- ionel firuti: 10.00 €
- Argel Thulin: 2.00 €
- Tim Altmann: 1.00 €
- Christoph Hackl: 2.00 €
- Joel Vazquez: 10.00 $
- Tommaso Tautonico: 1.00 €
- Fabio Vannoni: 4.50 €
- Willy Andresen: 10.00 $
- Antonino Muscarella: 1.00 €
- Каширин Михаил: 1.00 ₽
- Pietro Brasile: 2.00 €
- Giorgio Frasca: 5.00 €
- Andrea Della Verde: 1.00 €
- RAFAL SZALKA: 2.00 GPB
- marco da silva: 2.00 €
- Jose Rodriguez Martinez Z: 1.00 €
- Francesco Rizzo: 1.00 €
Really thanks to donators
I did something wrong while i was on recovery and now i have no OS installed and no twrp access.Only fastboot mode.I tried to install recovery with your tool but the pc can't recognise the phone.It says waiting for the device.I installed drivers with your tool but still the same.I was on H2os (Opx to bacon).what can i do?Thanks in advance
There's no setup. Exe
malavan said:
There's no setup. Exe
Click to expand...
Click to collapse
what have you downloaded?
Universal_Fastboot_And_Adb_Tool_1.0.0.1.zip
Thread closed, please use the central thread below:
[TOOL] Universal Fastboot & Adb Tool
Thanks,
Darth
Senior Moderator
This is my latest creation. Easy to use, it has been created to support all devices compatible with fastboot and adb. Currently, only some basic functions are available, coming soon many more commands
Universal Fastboot & Adb Tool
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FUNCTIONS
Install Drivers
Unlock Bootloader
Flash Recovery
Reboot Phone (from anywhere to anywhere)
Update the Tool to last version
Complete Wipe from Fastboot
Open a cmd window with fastboot and adb privileged
NOTE
This is the first release and it can have some bug. If you find some bug tell me with a pm or a comment
Before using the tool, make sure that you have turned the oem unlocking, usb debugging.
If you have any problems during installation then first try to update the Microsoft Net freamwork to latest version:
https://www.microsoft.com/it-it/download/details.aspx?id=30653
HOW TO INSTALL
Download .zip file;
Extract all its contents into a folder;
Click on setup.exe;
Click on "Install";
Waiting for the end of the process;
Enjoy your tool
UPDATE
There will be no need to re-download the new tool, but just look for new updates directly from the tool.
In all cases I'll update the link in this thread and report it when there are new updates with its changelog.
(If you have some error during the update, please click continue and if you have some problems after an update please try to unistall the tool and install the lastest tool avaible)
CHANGELOG
#1.0.0.0
Initial Release
#1.0.0.1
Added Huawei Unlock Bootloader support
Added Sony Unlock Bootloader support
Added Some Other Commands (now you can open a free cmd window with fastboot and adb privileged)
General Bugfix.
#1.0.0.2
Added new Fastboot and Adb .exe;
Removed Vendor ID option ( with new Fastboot and Adb .exe is not necessary);
Fix flash recovery and boot;
General Bugfix.
CONTACTS
If you think it necessary to add new features please comments or send me a private message or send me an email to [email protected]
DOWNLOAD
Universal Fastboot & Adb Tool
( Alternative Link )
DONATE LINK
If you want to support the project please consider making a donation, thanks (If you make a donation, please tell me for what tool you have made it).
DONATORS:
- Alberto Pettenò: 2.00 €
- Oliver E. : 3.50 €
- Tunde Alabi: 10.00 $
- Giovanni MacCelli: 5.00 €
- Cristian Godnik: 5.00 €
- Luca Milkovitsch: 5.00 €
- Nicolò Rossini: 2.00 €
- Luigi Pedrini: 1.00 €
- Oscar Davi: 5.00 €
- Claudio Orititi: 2.50 €
- James Goldsbury: 3.00 $
- Abel Varela Carou: 2.00 €
- Juan Carlos Cuevas Barreira: 5.00 €
- scooterofficina: 1.00 €
- Paul Moore: 3.00 GPB
- Mattia Colle: 1.00 €
- Maryan Komar: 2.00 €
- Luigi Ardizzone: 1.00 €
- Maximo76: 10.00 €
- Loïc Payol: 13.37 €
- Antonio Rateni: 2.00 €
- Matteo Verzella: 0.50 €
- Lukas Heddendorp: 2.00 €
- Scott Dare: 5.00 €
- Leonardo F. : 3.00 €
- Andrea Tassotti: 5.00 €
- Stefano Franceschini: 1.00 €
- Евгений Сериков: 1.00 €
- Stian Domben Bardsen: 20.00 €
- Kevin Dang: 2.00 $
- David Lebrun: 5.00 €
- James Hise: 15.00 €
- Daniele Barbana: 0.40 €
- Christophe Van B. : 2.50 €
- Robert Möller: 10.00 €
- Johannes Fleischmann: 5.00 €
- Marco Rigoni: 10.00 €
- Pasquale Rivieccio: 2.00 €
- Jorge Toledo: 5.00 €
- ionel firuti: 10.00 €
- Argel Thulin: 2.00 €
- Tim Altmann: 1.00 €
- Christoph Hackl: 2.00 €
- Joel Vazquez: 10.00 $
- Tommaso Tautonico: 1.00 €
- Fabio Vannoni: 4.50 €
- Willy Andresen: 10.00 $
- Antonino Muscarella: 1.00 €
- Каширин Михаил: 1.00 ₽
- Pietro Brasile: 2.00 €
- Giorgio Frasca: 5.00 €
- Andrea Della Verde: 1.00 €
- RAFAL SZALKA: 2.00 GPB
- marco da silva: 2.00 €
- Jose Rodriguez Martinez Z: 1.00 €
- Francesco Rizzo: 1.00 €
Really thanks to donators
Looks promising will give it a try
أرسلت من HUAWEI NXT-L29 بإستخدام تاباتلك
This looks a complete package then just adb and fastboot. Will report
bluheart said:
This looks a complete package then just adb and fastboot. Will report
Click to expand...
Click to collapse
i dont understand what you are saying
Hi, anyone tried this tool?
samaliset said:
Hi, anyone tried this tool?
Click to expand...
Click to collapse
There are 1300 total download, i think that someone try it
mauronofrio said:
There are 1300 total download, i think that someone try it
Click to expand...
Click to collapse
I hope someone will confirm.
By the way I am not sure to have understood the full deatils, is this means the tool can provide the bootloader or can unlock it?
samaliset said:
I hope someone will confirm.
By the way I am not sure to have understood the full deatils, is this means the tool can provide the bootloader or can unlock it?
Click to expand...
Click to collapse
the tool can help you to unlock your bootlaoder
Ok thanks but I am facing a silly problem, I can't fastboot, although tried both buttons volume high+low plus reboot one.
Thread closed, please use the central thread below:
[TOOL] Universal Fastboot & Adb Tool
Forum moderator,
Matt
NFT 2.0.7 & 1.2.3- Nokia Flash Tool to flash stock ROM
This tool can make you easier to install stock roms
This program is made for Windows, with .NET Framework 4.5.1 This is VB.net program
v.1.1.0
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What the tool can do:
- Flash phone - the tool supports the following phones out of the box: Nokia 8.1, Nokia 9 PureView, Nokia 7.2, all Nokia phones on the SDM_660 family, And other Nokia Phones
- Requires the bootloader to be unlocked.
- Support for more phone models can be easily added by adding a new profile and defining the partitions to flash and matching it to file names to be flashed.
- Able to create custom flash process
- Able to import profile (partition and flash data) from a txt file (check sample format)
- Can dump your current partitions to create a flashable file for recovery (this function needs root access)
- Switch slot on A/B devices which support slot change
Thanks to:
- Hikari Calyx (hikaricalyx.com)
- Narender Singh (TechMesto.com)
System requirements:
- Windows 7, 8, 8.1,10 or higher, 32bit or 64bit
- .NET Framework 4.5.1
- USB Data Cable
- Phone
Downloads:
NFT v.1.2.4 (Stable)
NFT v.2.0.8 ( Stable )
NFT v.2.0.9 ( Stable ) - new 08 Dec 2020
NFT v.2.1.0 ( Stable ) - new 11 nov 2021
Firmware :
Firmware 7.2 (1_390)
Firmware 6.2 (1_160)
*Work with Payload
- install python 3
- make sure user Environment variables link to Python folder and Python folder\script
Bugs:
v.1.1.1
-nokia 9 profile & dump (fix on 1..1.2)
v.1.1.2
- language failed to saved on second times ( fix on 1.1.3)
- some word failed to translate to CN ( fix on 1.1.3)
v1.1.3
- abl skip not work after add language (fix on 1.1.3a)
v1.1.3a
-none
v1.1.4
- on some case Nokia 8.1 switch to A slot After flash (fix on 1.1.5)
v.1.1.5
- dump on nokia 7.2, 6.2 because new naming process (fix on 1.1.6 )
v.2.0.7
- ota flash not work (fix on 2.0.8 )
Update & change Logs
NFT v1.1.0
- New design
- Add support phone
- Add auto-detect mode
- Add some feature on profile management
NFT v.1.1.1
- Fix detect Device for MTK & A-only Device
- Fix dump for nokia 8.1
- add dump profile for nokia 8 & Sirocco
NFT v1.1.2
- FIx Nokia 9 profile and dump
- now dump partition Work on FTM mode And Normal mode
- Add Language Setting : Simplified Chinese & English...
NFT v1.1.3
- fix save language in setting
- Fix some translate in CN language
- Add warning when flash Payload.bin
- Now NFT only process payload.bin with size more than 1Gb
(make sure use full system update payload.bin..)
NFT v1.1.3a
-fix minor bugs
NFT v1.1.4
- support more python name (for multiple python installed) default : python3, python, py . can add more
- add install protobuf on script
- add check slot on dump
- add custom dump setting..
- to change saved filename partition double click file name
*for best restore dump please use default file name for splash partition
NFT v1.1.5
- Fix auto-switch to slot A, after Flashing Nokia 8.1
- add Russian Language
- add Indonesia Language
- dump files Now naming Base installed Rom.
27 Des.
- fix auto-detect for new devices (7.2 ,6.2 , etc)
29 Des
- add Donate link... for donate
- add logs
v1.1.6
- fix dump problem on nokia 6.2, nokia 7.2
- new menu - Create homebrew from OTA FILES (extracted)
3 januari 2020
- fix name file Homebrew ( Minor)
- add error handle homebrew Clean temp files
- update Logs
27 januari 2020
- fix naming dump for some devices... when dump inactive slot
-fix minor bugs
V2.0.0
- New UI
- Restore Partition from ADB
28 januari 2020
V2.0.1
- Fix restore partition From ADB
- Tweak Side menu animation(Faster)
- now support flash partition structure (for convert CN - Global)
V.1.1.7
- now support flash partition structure (for convert CN - Global)
v2.0.2 & v1.1.8
- fix 4.2 & 3.2 Support
- note for nokia 4.2 & 3.2: Before do anything on flash form set profile to nokia 4.2 and nokia 3.2
v2.0.3 & v1.1.9
- fix minor bug for nokia 9
- fix nokia 7.2/6.2 didn't boot after flash ( Vbmeta problem)
v2.0.4 & v1.2.0
- NOw Support .zip file ( Ota File & Cutom rom )
- fix English translate
v2.0.5 & v1.2.1
- NOw Support .zip file ( Ota File & Cutom rom )
- fix English translate
- add separate setting For vbmeta flash script ( because -disabled-verify on some device will cause failed to update ota )
v2.0.8 & v1.2.4
- add support raghu vagma Homebrew Firmware
v2.0.9
- remove unused messagebox
* note for nokia 4.2 & 3.2: Before do anything on flash form set profile to nokia 4.2 and nokia 3.2
Reserved
How to :
* Flash phone
- Open NFT
- Choose Flash Normal
- Select Folder which Contain Firmware File
- Select Profile ( U can create Your Own profile In manage button)
- Flash
* Flash phone With Payload.bin
- Extract Full Ota FIle .zip
- Open NFT
- Choose Payload.bin File
- Choose Slot
- FLash
* Create Dump Partition Profie
- Open NFT
- Select Tools
- Select Dump partition
- Select manage
- Connected Phone with USB Debuging SET ON With Root Permision Granted
- Add New
- Select Which Partition Do you Want to backup
- Naming Profile
- Save
* Dump Partition
- Open NFT
- select Tools
- Select Dump Partition
- Connected Phone with USB Debuging SET ON With Root Permision Granted
- Select Profile
- Select Slot
- Dump Partition
* Homebrew From FULL OTA FIle
- Extract Full Ota FIle .zip
- Open NFT
- select Tools
- Select Make HomeBrew From Full OTA FILES
- Select Payload.bin File
- Choose Folder To save Homebrew
- Make Homebrew
* HomeBrew Security update
- Root Phone
- Follow instruction How to update phone on Magisk forum
- after update don't restart and don't Pacth boot.img to other slot
- Open NFT - Tools -Dump Partition
- Select Profile Homebrew For your Device
- Set inactive Slot on Slot option (if active Slot 'a' then choose 'b' , if active Slot 'b' then choose 'a')
- dump partition
Thank you ? Now I can mod my Nokia 7.2 without worrying too much.
Nice work!
anyone have valid link to stock firmware? thank you in advance
pattiandy said:
anyone have valid link to stock firmware? thank you in advance
Click to expand...
Click to collapse
Click hikari calyx name in NFT to download firmware
I tried flashing OTA using payload mode. After the operation was finished, my devise's screen turned black and now it does not turn on anymore. Is there anything I can do to fix it?
so it's some sort of 9008 mode I guess. and I couldn't find any nb0 firmware. I am absolutely clueless about what to do now.
lilmonkw said:
I tried flashing OTA using payload mode. After the operation was finished, my devise's screen turned black and now it does not turn on anymore. Is there anything I can do to fix it?
so it's some sort of 9008 mode I guess. and I couldn't find any nb0 firmware. I am absolutely clueless about what to do now.
Click to expand...
Click to collapse
i put information in about button
for payload mode...it only for full rom OTA.. size about 1,5GB or more..
let me know what payload u use..
and what devices???
firmware download click on hikari name on NFT tools...
for 7.2 u need extract every zip in firmware and put it in one folder..
Flash using normal flash
lilmonkw said:
I tried flashing OTA using payload mode. After the operation was finished, my devise's screen turned black and now it does not turn on anymore. Is there anything I can do to fix it?
so it's some sort of 9008 mode I guess. and I couldn't find any nb0 firmware. I am absolutely clueless about what to do now.
Click to expand...
Click to collapse
Which device did you flash? And didn't you understand that you need a full OTA to use the payload method?
Check if the device is in QdLoader 9008 mode, then you can still recover it. But if it is in some other mode, then the recovery needs disassembly.
sayaoks said:
i put information in about button
for payload mode...it only for full rom OTA.. size about 1,5GB or more..
let me know what payload u use..
and what devices???
firmware download click on hikari name on app...
for 7.2 u need extract every zip in firmware and put it in one folder..
Flash using normal flash
Click to expand...
Click to collapse
I missed that payload information, and it's my fault. My device is in the 9008 mode now. Nokia 7.2.
I did not use the full OTA, and then I pretty much broke things. The OTA I used was the one I pulled out after it automatically downloaded on my phone. The device had August security patched firmware (the only one on the hikari website) installed.
---------- Post added at 12:49 PM ---------- Previous post was at 12:47 PM ----------
singhnsk said:
Which device did you flash? And didn't you understand that you need a full OTA to use the payload method?
Check if the device is in QdLoader 9008 mode, then you can still recover it. But if it is in some other mode, then the recovery needs disassembly.
Click to expand...
Click to collapse
I messed up with flashing not full OTA, and it's my fault. My device is Nokia 7.2. It's in the QdLoader 9008 mode.
lilmonkw said:
I messed up with flashing not full OTA, and it's my fault. My device is Nokia 7.2. It's in the QdLoader 9008 mode.
Click to expand...
Click to collapse
From QDLoader, we should be able to fix it, but unfortunately, Nokia has not released a rawprogram and patch0.xml files. But you can likely use the one from Nokia X71 after slightly modifying it. Then flash abl and xbl using QFIL tool. Once you have a working bootloader (fastboot mode), you will be able to flash the stock ROM again.
I think @hikari_calyx will have a better idea about which files to use.
singhnsk said:
From QDLoader, we should be able to fix it, but unfortunately, Nokia has not released a rawprogram and patch0.xml files. But you can likely use the one from Nokia X71 after slightly modifying it. Then flash abl and xbl using QFIL tool. Once you have a working bootloader (fastboot mode), you will be able to flash the stock ROM again.
I think @hikari_calyx will have a better idea about which files to use.
Click to expand...
Click to collapse
What would I need to modify in those files? And is there a possibility of Nokia releasing rawprogram and patch0.xml for 7.2 ever?
"use Payload.bin" not support Python3 for Windows Store
[email protected] said:
"use Payload.bin" not support Python3 for Windows Store
Click to expand...
Click to collapse
u need install python 3.
and install protobuf "python install protobuf"
for payload flash
if your python use "python3 / py" for running python...
use latest v1.1.4 its support
On my 7.2 im trying to go back to stock from Lineage 16.0 (unofficial) so that some things will work again and im getting:
"Flash abort!! Phone Looked Bootloader" (not a typo)
"ALL TASK COMPLETE"
Talon Pro said:
On my 7.2 im trying to go back to stock from Lineage 16.0 (unofficial) so that some things will work again and im getting:
"Flash abort!! Phone Looked Bootloader" (not a typo)
"ALL TASK COMPLETE"
Click to expand...
Click to collapse
Hi, is your device critical unlocked? If not, please do it.
Code:
fastboot oem device-info
singhnsk said:
Hi, is your device critical unlocked? If not, please do it.
Code:
fastboot oem device-info
Click to expand...
Click to collapse
The bootloader is, how do you think i got the Lineage on it? I dont how to unlock anything else, this is all new to me on the Android side, im a Windows guy. I have TWRP on it, will that matter?
Nvm, i figured it out, got it unlocked.
It gets to "Flashing system.img to system_b" and aborts. Same thing happens if i switch to system_a.
Talon Pro said:
It gets to "Flashing system.img to system_b" and aborts. Same thing happens if i switch to system_a.
Click to expand...
Click to collapse
You unpacked the system, boot and vendor image to the same folder as well, right? And not to some other folder. The file exists in the same directory?