Develop Bugs

CWM recovery for KARBONN A18!!!

CWM RECOVERY FOR THE KARBONN A18!!
Hey guys!! Finally i ported the ClockWorkMod ICS recovery (non-touch) onto our device!!
For people who dont know what CWM recovery and its benefits are, read this -> http://www.addictivetips.com/mobile/what-is-clockworkmod-recovery-and-how-to-use-it-on-android-complete-guide/
So, here are the steps on getting the CWM on Karbonn A18-
What you need
1. Karbonn A18, data usb cable.
2. Download the CWM recovery image file from the attachment below this post.
3. Download SP Flash Tool from my another post -> http://forum.xda-developers.com/attachment.php?attachmentid=1353992&d=1348592592
4. Download MTK6575 Driver from -> http://forum.xda-developers.com/attachment.php?attachmentid=1353943&d=1348591411
5. Download the MTK6575 Scatter.txt file from the attachment below this post.
Installation Steps-
1. Unzip and Install the MTK6575 USB drivers on your Windows PC, just run setup.exe.
Connect your phone switched off and battery removed using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Put the battery back but do not switch on the phone
2. Copy the CWM recovery file that you downloaded from my attatchment. Rename it to be recovery.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5. Click on Options, check USB mode.
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your downloaded scatter.txt file. By default you will have only one map file of name MT6575_Android_scatter_emmc. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "RECOVERY". Leave Recovery checked. Now click on the "RECOVERY" just right to the checkbox and browse and select the cwm.img file you downloaded from the attachment below.
9. Now click on "Download" on the Application or press F9 on keyboard. Warning messages will occur, but ignore them..
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this the Congrats You have flashed CWM !
Check by unplugging the phone and re-starting it with Power+Volume Down button Pressed. The Phone will boot into CWM !.
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
BUGS / Not functioning features :
Backing up the data not working
USB mount SDCARD through recovery not working
Credits:
I, Me & Myself..
EDIT:
i have tried removing some bugs, try and tell me u all!!!
I have also included the stock recovery.img file in the attatchment for people who want the stock recovery.
********************Anyone having problems can flash the cwm using the mobile uncle tools application....download that from the play store!*********************
..& hey plz if u think i deserve thanks then don't forget to thank me by pressing the thanks button below :victory:

Good Job done
Built from source or using web builder?

i cant flash this through sp - tool
vshlkmr said:
CWM RECOVERY FOR THE KARBONN A18!!
Hey guys!! Finally i ported the ClockWorkMod ICS recovery (non-touch) onto our device!!
For people who dont know what CWM recovery and its benefits are, read this -> http://www.addictivetips.com/mobile/what-is-clockworkmod-recovery-and-how-to-use-it-on-android-complete-guide/
So, here are the steps on getting the CWM on Karbonn A18-
What you need
1. Karbonn A18, data usb cable.
2. Download the CWM recovery image file from the attachment below this post.
3. Download SP Flash Tool from my another post -> http://forum.xda-developers.com/attachment.php?attachmentid=1353992&d=1348592592
4. Download MTK6575 Driver from -> http://forum.xda-developers.com/attachment.php?attachmentid=1353943&d=1348591411
5. Download the MTK6575 Scatter.txt file from the attachment below this post.
Installation Steps-
1. Unzip and Install the MTK6575 USB drivers on your Windows PC, just run setup.exe.
Connect your phone switched off and battery removed using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Put the battery back but do not switch on the phone
2. Copy the CWM recovery file that you downloaded from my attatchment. Rename it to be recovery.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5. Click on Options, check USB mode.
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your downloaded scatter.txt file. By default you will have only one map file of name MT6575_Android_scatter_emmc. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "RECOVERY". Leave Recovery checked. Now click on the "RECOVERY" just right to the checkbox and browse and select the cwm.img file you downloaded from the attachment below.
9. Now click on "Download" on the Application or press F9 on keyboard. Warning messages will occur, but ignore them..
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this the Congrats You have flashed CWM !
Check by unplugging the phone and re-starting it with Power+Volume Down button Pressed. The Phone will boot into CWM !.
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
Credits:
I, Me & Myself..
..& hey plz if u think i deserve thanks then don't forget to thank me by pressing the thanks button below :victory:
Click to expand...
Click to collapse
while downloading i got the error

reach2dinu said:
while downloading i got the error
Click to expand...
Click to collapse
First Check if the MTK drivers are installed, check it by going tinto the device managers hardware section in my computer
If it is proper then try connecting your phone without the battery inserted

Same problem..
reach2dinu said:
while downloading i got the error
Click to expand...
Click to collapse
I'm facing the same problem.. I tried with battery in and out.. have installed the drivers as well..

i ported this recovery from a ZOPO Z900 Leader chinese android handset...i tried building from source, but i failed at it because of partition style in a18...
For people facing problems flashing it through sp tools, u all can try to flash it using another pc or alternatively view this youtube video -> http://www.youtube.com/watch?v=969xwsUTkSY

ujjwalk308 said:
I'm facing the same problem.. I tried with battery in and out.. have installed the drivers as well..
Click to expand...
Click to collapse
Same problem here.

Anyone having problems can flash the cwm using the mobile uncle tools application....download that from the play store!

vshlkmr said:
Anyone having problems can flash the cwm using the mobile uncle tools application....download that from the play store!
Click to expand...
Click to collapse
Ok.now waiting for the bugfix.

reach2dinu said:
while downloading i got the error
Click to expand...
Click to collapse
always usb cable error
Connect usb cable & discconet auto & charging mode
this is usb driver ????

great job. im a noob at this so will try after people posting have successfully ported the cwm to their phone

There are two recovery.img files in your attachments. recovery.img and cwmfinal.img. Which one should be used in sp flash tool?

I recently purchased Karbonn a21, can I try this on it?
Sent from my GT-I9300 using xda app-developers app

Thnx bro worked like a charm.
Sent from my Karbonn_A18 using xda app-developers app

fail root
plz send device manager screen shot

Can anyone please upload stock rom of karbonn a18. My device stock at boot animation screen.
Sent from my GT-P1000 using xda premium

reach2dinu said:
while downloading i got the error
Click to expand...
Click to collapse
same problem any help pz

Cwm flashed
I have successfully installed cwm on my karbonn a18.
I did it wit the help of mobileunckle tools.
What are the next motives now??
1) can we change the battery indicator at the notification area to percentage signs?

vshlkmr said:
CWM RECOVERY FOR THE KARBONN A18!!
Hey guys!! Finally i ported the ClockWorkMod ICS recovery (non-touch) onto our device!!
For people who dont know what CWM recovery and its benefits are, read this -> http://www.addictivetips.com/mobile/what-is-clockworkmod-recovery-and-how-to-use-it-on-android-complete-guide/
So, here are the steps on getting the CWM on Karbonn A18-
What you need
1. Karbonn A18, data usb cable.
2. Download the CWM recovery image file from the attachment below this post.
3. Download SP Flash Tool from my another post -> http://forum.xda-developers.com/attachment.php?attachmentid=1353992&d=1348592592
4. Download MTK6575 Driver from -> http://forum.xda-developers.com/attachment.php?attachmentid=1353943&d=1348591411
5. Download the MTK6575 Scatter.txt file from the attachment below this post.
Installation Steps-
1. Unzip and Install the MTK6575 USB drivers on your Windows PC, just run setup.exe.
Connect your phone switched off and battery removed using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Put the battery back but do not switch on the phone
2. Copy the CWM recovery file that you downloaded from my attatchment. Rename it to be recovery.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5. Click on Options, check USB mode.
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your downloaded scatter.txt file. By default you will have only one map file of name MT6575_Android_scatter_emmc. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "RECOVERY". Leave Recovery checked. Now click on the "RECOVERY" just right to the checkbox and browse and select the cwm.img file you downloaded from the attachment below.
9. Now click on "Download" on the Application or press F9 on keyboard. Warning messages will occur, but ignore them..
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this the Congrats You have flashed CWM !
Check by unplugging the phone and re-starting it with Power+Volume Down button Pressed. The Phone will boot into CWM !.
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
BUGS / Not functioning features :
Backing up the data not working
USB mount SDCARD through recovery not working
Credits:
I, Me & Myself..
EDIT:
i have tried removing some bugs, try and tell me u all!!!
I have also included the stock recovery.img file in the attatchment for people who want the stock recovery.
********************Anyone having problems can flash the cwm using the mobile uncle tools application....download that from the play store!*********************
..& hey plz if u think i deserve thanks then don't forget to thank me by pressing the thanks button below :victory:
Click to expand...
Click to collapse
will you please give CWM for Micromax A90 specification maybe same as A18
here is Specification
Micromax A90
Super Amoled Plus LCD with 262 k
MTK6575 CPU 1 Ghz
512 MB RAM (350 - 400) User available
512 MB ROM ( its not RAM ) for apps
2.5 GB external SD for media file ( Music/Video,,,etc.)
8 Mega Pixel Camera + 0. Mega Pixel Front Camera
Android OS 4.0.3
with Rooted cell
plz help us to create new CWM + Custom ROM
also its same specification from some Chinese Brand like Zoppo / Hero / Gionnee / HDC
plz help.

Pritesh.mohan said:
I have successfully installed cwm on my karbonn a18.
I did it wit the help of mobileunckle tools.
What are the next motives now??
1) can we change the battery indicator at the notification area to percentage signs?
Click to expand...
Click to collapse
You could do that before flashing Cwm aswell.. Use rom toolbox.. I did it the day I got this phone

[GUIDE] How To Flash TWRP And Root Xiaomi Mi Max

EDIT 8/2/19: I do not own this device anymore. So i cannot and dont know if anything changed about the procedures unlocking rooting etc. BUT if you are getting any trouble i might can help you. Comment your thoughts below
Hey guy, i saw a lot of guys here wondering how to root and flash twrp recovery on thier devices . Today i am gonna show you how to do that.
First of all make sure 3 things :
1. backup your images, contacts, music tracks etc on a external SD CARD, or on your computer.
2. You MUST have the BOOTLOADER unlocked. To do that, read this guide http://en.miui.com/thread-202290-1-1.html
3.Charge your device to 80%+
HOW TO FLASH TWRP AND ROOT MI MAX
1. Go to Settings-About phone-Find the MIUI VERSION, and tap on it for 5-10 times.
2. Go back to settings, sellect adittional settings. click on Developer options, and select enable
3. Find the option USB Debugging and enable it.
4. Download the TWRP recovery from the link
5. rename the file to 'recovery.img'
6. Move the image to the same file where the ADB was installed ( it should be on Computer-> C: -> Adb )
7. Open the adb folder
8. Press and hold the shift key and right click in the folder
9. click on the option "Open command window here"
10. Boot your device on fastboot mode by turning it off, pressing Power and the Volume Down buttons together, and then connect it with your computer
11. First type this command "fastboot devices" to check if your device is into fastboot mode
12. Enter the command "fastboot flash recovery recovery.img"
13. Enter the command "fastboot boot recovery.img"
14. Your phone is now in TWRP recovery mode ( if it is not, the write on ADB: reboot recovery )
15. select Install Zip and click on 'SuperSu.zip'
16. corfirm the flash
17. reboot your device
18. DONT PANIC IF YOU DEVICE WONT TURN ON. Sometimes need to wait 10-20 secs.
DOWNLOADS
1. ADB- (https://forum.xda-developers.com/showthread.php?t=2588979)
2. XIAOMI MI MAX HYDROGEN DRIVERS (http://xiaomiadvices.com/download-xiaomi-usb-drivers/)
3. TWRP RECOVERY IMAGE https://dl.twrp.me/hydrogen/ LATEST VERSION IS twrp-3.2.3-0
4. BetaSuperSu 2.74 http://www13.zippyshare.com/v/OFQGvIyA/file.html

RESERVED

The thread must be removed to XIAOMI MI MAX GUIDES, NEWS, & DISCUSSION

Hallo Friend!
I am about to test your guide. I think it is most decent among other guides on the net...
Could you please just tell me if it's gonna work on:
Android 6.0.1 MMB29M
MIUI 8.2.1.0 (MBCMIDL) Stable
kernel 3.10.84-perf-gfe86e7b
bootloader UNLOCKED
Is superSU by default included in the TWRP you gave? No need to download it additionally from somewhere?
What about warning about "dm-verity" on official TWRP website?
This device uses dm-verity!
This means that swiping to allow system modifications will prevent you from being able to boot if you are using the stock kernel. In order to bypass dm-verity's boot prevention, you will have to install a kernel that has dm-verity disabled in the fstab.
Click to expand...
Click to collapse
Should this be any concern that the phone will not boot up again? Should this be disabled first?
Is it better to use the TWRP version you provided (3.0.3.0? not listed on official TWRP website? why?) or the lastest 3.1.0.0?

noob456 said:
Hallo Friend!
I am about to test your guide. I think it is most decent among other guides on the net...
Could you please just tell me if it's gonna work on:
Android 6.0.1 MMB29M
MIUI 8.2.1.0 (MBCMIDL) Stable
kernel 3.10.84-perf-gfe86e7b
bootloader UNLOCKED
Is superSU by default included in the TWRP you gave? No need to download it additionally from somewhere?
What about warning about "dm-verity" on official TWRP website?
Should this be any concern that the phone will not boot up again? Should this be disabled first?
Is it better to use the TWRP version you provided (3.0.3.0? not listed on official TWRP website? why?) or the lastest 3.1.0.0?
Click to expand...
Click to collapse
hello, please write again your problem. I can understand what do you mean.

StonebridgeGr said:
hello, please write again your problem. I can understand what do you mean.
Click to expand...
Click to collapse
Ok just two questions then, because I'm not sure what you can't understand. Please explain.
1) What Android, MIUI and kernel did you root?
2) Do you have SuperSu.zip in TWRP 3.0.3 by default? You didn't say anything in your guide about downloading it and from where + what version.

noob456 said:
Hallo Friend!
I am about to test your guide. I think it is most decent among other guides on the net...
Could you please just tell me if it's gonna work on:
Android 6.0.1 MMB29M
MIUI 8.2.1.0 (MBCMIDL) Stable
kernel 3.10.84-perf-gfe86e7b
bootloader UNLOCKED
Is superSU by default included in the TWRP you gave? No need to download it additionally from somewhere?
What about warning about "dm-verity" on official TWRP website?
Should this be any concern that the phone will not boot up again? Should this be disabled first?
Is it better to use the TWRP version you provided (3.0.3.0? not listed on official TWRP website? why?) or the lastest 3.1.0.0?
Click to expand...
Click to collapse
This twrp. Img it's for all the versions but only for mi max. Not the prime . This twrp doesn't contain superSU. If I remember correctly. But if on the TWRP contain the super su. Don't say yes. Just flash it like I saying on the guide. Maybe they upload a newest version. You can use the new. I think I put the official website . I will check it.

Ok thanks for the answer. Please check from where I download SuperSu - which version would be best.
Please tell me your Android, kernel and MIUI version that you rooted.

noob456 said:
Ok thanks for the answer. Please check from where I download SuperSu - which version would be best.
Please tell me your Android, kernel and MIUI version that you rooted.
Click to expand...
Click to collapse
LOL I forgot to add the superSU link...

That's what I told you. Then please do.

noob456 said:
That's what I told you. Then please do.
Click to expand...
Click to collapse
ok on the first post you can find all the links. if i miss something please tell me here !

Is this beta version of SuperSU reliable? Did you use it? Not better to use a stable version?

noob456 said:
Is this beta version of SuperSU reliable? Did you use it? Not better to use a stable version?
Click to expand...
Click to collapse
It's compatible with mi max. You will not have any problem. Don't worry

noob456 said:
Is this beta version of SuperSU reliable? Did you use it? Not better to use a stable version?
Click to expand...
Click to collapse
Waiting to tell me if everything went fine with the installation and the flashing

Hey, tried following Your guide to install a new rom last night. Great guide for noobs like me, but it may be worth renaming the thread to something like "How to flash whatever makes You happy on to Your Mi Max". These instructions seem to work fine regardless of what's being flashed. Great job, mate!

So I finally tried it and it was successful for me as well! But I used the latest version of TWRP (3.1.0) and SuperSu (2.79-20161205). Please add a point in your tutorial to upload SuperSU.zip to the phone first, because out of emotion, I forgot... So I flashed TWRP, booted it and then... ups... no SuperSu So I wanted to reboot the phone to upload SuperSU but since only SuperSU patches dm-verity (the thing I was afraid of the most - I told you before), my phone got into boot-loop and didn't want to start. So I just uploaded SuperSU to a memory card, entered Fastboot Mode again with key-combination, plugged the cable, typed "fastboot reboot-bootloader" command and was again in TWRP to flash SuperSu from my memory card.... ufff.
So I would reedit it a bit:
0. Copy SuperSU.zip to the phone/memory card!
1. Go to Settings-About phone-Find the MIUI VERSION, and tap on it for 5-10 times.
2. Go back to settings, sellect adittional settings. click on Developer options, and select enable
3. Find the option USB Debugging and enable it.
4. Download the TWRP recovery from the link
5. rename the file to 'recovery.img'
6. Move the image to the same file where the ADB was installed ( it should be on Computer-> C: -> Adb )
7. Open the adb folder
8. Press and hold the shift key and right click in the folder
9. click on the option "Open command window here"
10. Boot your device on fastboot mode by turning it off, pressing Power and the Volume Down buttons together, and then connect it with your computer
11. First type this command "fastboot devices" to check if your device is into fastboot mode
12. Enter the command "fastboot flash recovery recovery.img"
13. Enter the command "fastboot boot recovery.img" - the phone will get disconnected from your PC automatically
14. Your phone is now in TWRP recovery mode (it takes about 30-60 seconds before FastBoot screen switches into TWRP - wait patiently)
15. select Install Zip and click on 'SuperSu.zip'
16. corfirm the flash
17. reboot your device
18. DONT PANIC IF YOU DEVICE WONT TURN ON. Sometimes need to wait 10-20 secs.

Hey, I just got connected with WiFi and new MIUI 8.2.3.0 MBCMIDL wants to be installed, although the phone is rooted with bootloader unlocked. Is it safe to apply the update? Is it goona remove root so that I have to go over the process again?

So I tried the update. First time it said it failed, second time it downloaded the whole ROM after which it rebooted device and TWRP started doing "something" - I don't know what. After that the phone didn't want to boot, and what's even better didn't want to run recovery (TWRP), instead it went into fastboot. What I had to do was to use MiPhoneDrivers from this topic: https://forum.xda-developers.com/mi-max/how-to/guide-install-global-miui8-root-t3435594 (including MiFlash 2015, because 2016 version didn't want to work properly on my PC) and follow the instruction from official MIUI website to flash from scratch the new ROM MIUI 8.2.3.0 which I did. After that my phone was alive again. I installed TWRP and rooted the phone again. Now I've got MIUI 8.2.30 rooted. :] End of the story so far. My settings left untouched - icons, wallpaper etc. So that would be the way to update MIUI if they prepare a new one.

Is there anyway to root the phone without connecting it to pc?

noob456 said:
So I tried the update. First time it said it failed, second time it downloaded the whole ROM after which it rebooted device and TWRP started doing "something" - I don't know what. After that the phone didn't want to boot, and what's even better didn't want to run recovery (TWRP), instead it went into fastboot. What I had to do was to use MiPhoneDrivers from this topic: https://forum.xda-developers.com/mi-max/how-to/guide-install-global-miui8-root-t3435594 (including MiFlash 2015, because 2016 version didn't want to work properly on my PC) and follow the instruction from official MIUI website to flash from scratch the new ROM MIUI 8.2.3.0 which I did. After that my phone was alive again. I installed TWRP and rooted the phone again. Now I've got MIUI 8.2.30 rooted. :] End of the story so far. My settings left untouched - icons, wallpaper etc. So that would be the way to update MIUI if they prepare a new one.
Click to expand...
Click to collapse
Thanks for saving me the trouble.
Can someone help with a better method of applying updates?
Will downloading the zip (1.4GB approx) and flashing via TWRP help?

Official Jui Nougat stable beta - Cool1 dual

Rom download: https://cloud.mail.ru/public/5mxC/FNwvnWc4g
Password for unraring: coolpadJUI2017
Extract it in some folder.
Download only Patch, drivers and twrp install from here : https://drive.google.com/drive/folders/0B5vyMGZJJmcnbVUtT3A2UVFtS2M
Than install coolpad assistant from the very first one it has a lot of chines words and its and .exe fail u cant miss, and coolpad setup from the driver folder. After that go to "C: \ Program Files (x86) \ yulong" and install everything that is installable. After that start phone in fastboot mode which is when turn off phone and connect it to pc with usb cable while holding volume and volume down, after that red LED will blink. Or u can go to fastboot trough twrp recovery and find option bootloader confirm it with volume up and there u are. Start coolpad assistant that u installed, browse init.cpb and click check after that and installation will start, w8 it to finish. After that u need to install twrp which u download, start phone again in fastboot, but now using volume up and volume down option cos u dont have twrp anymore( its because JUI needs another one). start MIflash and browse folder TWRP, click refresh and tap on ur phone, its the only option u cant miss click flash. After it is done go to twrp standardly by pressing power button and volume up. Set english language. Go to install folder and Zip file from patch folder. Of course before that u need to transfer it to ur phone.. This patch is important. If u dont install it, it wont boot second time when u reboot phone.
After that download gapps from here : http://opengapps.org/ arm64, 7.1 and aroma check. Go to twrp install and select gapps click flash, Click "Next" - "Customized installation". Uncheck "Load choices". Select "Include" and tick application u want. After clicking finish Click the Home button, go to "wipe" - "advanced wipe", highlight "Dalvik / ART Cache", "Cache", "Data" and wipe. Click "Restart in OS".
After that go to twrp again, and install this chine bloat remover that u firstly transfered to ur phone (this step is not nescessery but I advise u to do it), to delete unnescessery apps. Unrar ROOT file and transfer superuser and apk file to ur phone. Go to twrp again and install superuser. click go to system and install that apk that u transerfed. ROOT STEP IS ONLY FOR THOSE WHO WANT TO ROOT THEIR PHONE. IF U DONT U DONT NEED THIS. I hope that i helpped someone.
Here is my short reviewe. Defenetly uprade eui to this, better interface, less bugs, less heating issues, still some messages dont come, but its around same as eui, even s7 in a very low rate of times have that issue. Battery optimization is much better too.Who didnt upgrade it, do it as soon as possible, cos of lower heating issues which later do damage to your phone and battery of course.
If anyone need help i am here

Can i falsh on c103 what are bugs??

Could we install magisk? I've tried once and it failed.

reddsmokee said:
Could we install magisk? I've tried once and it failed.
Click to expand...
Click to collapse
Same was for me.. I have this one and everything work the same..

pulkitgohil said:
Can i falsh on c103 what are bugs??
Click to expand...
Click to collapse
Fast charging now works, and about buggs, pretty same as on eui, sometimes messeges doesnt come.. and smart look is at this moment unavailble.. Bugs will be fixed in upcoming updates as u have ota update.. Officialy u can but people say that speaker doesnt work, so i wouldnt suggest to install it, w8 for fixed version.

Speaker working or not ?

when it release ? it from Leeco or Coolpad ??? i read somewhaere about Leeeco die, not support software for their product. And how about Coolpad??

roxcky said:
Speaker working or not ?
Click to expand...
Click to collapse
On c106 perfectly.

md07 said:
when it release ? it from Leeco or Coolpad ??? i read somewhaere about Leeeco die, not support software for their product. And how about Coolpad??
Click to expand...
Click to collapse
thi is coolpads product.. 1 month passed since release.

In c103 speaker works ??????

GPS issue
Just updated my Cool 1 c106 and tried to root but failed (QFIL, MI phone... Connected in fastboot mode, recognized as Qualcomm port) programs can't see the phone (before it worked) also a very important issue for me that can't turn on high accuracy GPS. Anyone facing the same issue or any ideas how to solve? :/
Thanks in advance!

I have bricked my phone using this method. It's not starting ,a red light is blinking when connected to the pc. How can I flash stable rom back on it? I have tried using YGDP but the phone is not connecting to the pc . A message is flashed ' usb device not recognised' whenever I connect. Pls guide and give the link of drivers to connect to the pc.

U couldnt brick it if u did all steps i said.. Try to install drivers from programfiles x86/ yulog and install everything fr there.. Pc should then recognize ur phone.. and then try to flash init.cpb with coolpad assistant
.
---------- Post added at 07:53 PM ---------- Previous post was at 07:49 PM ----------
djpingvin said:
Just updated my Cool 1 c106 and tried to root but failed (QFIL, MI phone... Connected in fastboot mode, recognized as Qualcomm port) programs can't see the phone (before it worked) also a very important issue for me that can't turn on high accuracy GPS. Anyone facing the same issue or any ideas how to solve? :/
Thanks in advance!
Click to expand...
Click to collapse
I dont have that issue. Try to install coolpad driver and to install everyting from the folder yulog which is located in Program files(x86). Then your pc shold recognize it. Also install adb, and qualcom driver. Then root it with superuser, not magisk.

GCam with HDR+
Does anyone have the ported GCam with HDR+ working? With a Sony camera sensor and SD652, it should be compatible with the phone under Nougat, and if it does work I would probably try running this ROM.

Use of attachment files???
What use of attachment files??

Does this work on C103?
Can anyone confirm if this works or not with c103?

skraw07 said:
What use of attachment files??
Click to expand...
Click to collapse
First remove chines apps, and second is to root ur phone if u want.

Hi HARSH9080!
Coul you find any solution ? After I successfully flashed TWRP almost the same...
My Cool1 (C106) is bricked. I only can enter to download mode (pushing volume + and - and power ON phone recognized as 'Qualcomm QDLoader 9008') after I installed JUI 7.1 tried to install TWRP recowery as well but now the phone is rebooting after boot logo and can't enter to recovery (stuck on recovery picture). Could anyone please suggest a method (with correct files) to be able to flas first correct recovery then a stock firmware? (YGDP cant see the phone it stucks on 'Entering download mode' only QFIL seems to work). Thank you very much in advance !

gapps stock
can i use arm64 7.1 stock gapps??

Can I flash this stock to Coolpad Cool Play 6 ? It's almost the same with Coolpad Cool 1...

[GUIDE] [Recovery] Flash TWRP & Root Moto C Plus with locked bootloader

Guide for Install TWRP & Root Moto_C_Plus With Locked Bootloader​
I have ported TWRP recovery for Moto C Plus
TWRP porting guide followed on xda [thanks for xda]
Code:
Follow instruction correctly..try at your own risk..i'm not responsible for if your device bricked..
Here is the step by step procedure for install twrp recovery on moto c plus with locked bootloader​
Instructions:-​The simple way to install twrp recovery on devices,, is to unlock the bootloader..and flash the recovery through fastboot..
I'm going to show you step by step instructions to flash the twrp on moto c plus WITHOUT unlocking the bootloader or lose any data.
1. first thing u need to some files..
Download and extract my ported recovery & files from here Tools NEW G-DRIVE LINK UPDATED!!!
Code:
[I][FONT="Times New Roman"][COLOR="Red"][SIZE="4"]note:[/SIZE][/COLOR][/FONT][/I]after dowloading file..
extract it and copy [I]SuperSU-v2.82-201705271822.zip[/I] file in ur sd card,,,,
DONT FORGET to flash SuperSU-v2.82-201705271822.zip file
after write memory ,,otherwise your device will stuck at
moto logo or soft brick
2.Open download tool(file provided in the above link,use provide sp_flash tool only because moto c plus have secure chip,need to authentication file,, so u cant flash through normal sp_flash tool) and load the download agent "MTK_AllInOne_DA.bin" & authentication file auth_sv5.auth from download_tool folder
3.Load the scatter-file found in the provided file.. select preloader only..but don't flash it.
4. Click Alt + Ctrl + V to activate advanced mode in sp flash tool.
5.Click on "window" up there and select "write mode"
6. Change the Begin address to "0x2d80000" and click on "file path" and choose the TWRP RECOVERY.img from extracted provided zip file
7. Click on "write Memeory", then Power off your device and remove the battery.. press and hold vol- button, then connect phone to pc via USB cable.. press &hold vol- key until pc detect...wait for Write memory ok window appears,, now your recovery is ready.
8.Next insert ur battery, press vol+ and power button simultaneously.. than select recovery mode..& boot into recovery
9.In twrp recovery select install and locate SuperSU-v2.82-201705271822.zip file in ur sd card and flash it..
10.After successful flash... hit reboot device..
!!!NOW YOU ARE ROOTED MOTO C PLUS!!!! Enjoy!!!!:good::good:
...Image Instruction are also available in attached file..​
For Compiled twrp go here Compiled Twrp
XDA-DevDB Information
TWRP For Moto C Plus with locked bootloader. Tool/Utility for all devices MT67xx
Contributor:
shr!pad
Created:13-12-2017
Last Update:02-05-2018
If u like my work, hit like button....​​

In ticked preloader , wut can I choose Broo.. ( TWRP RECOVERY.img ) ,??????
---------- Post added at 11:37 AM ---------- Previous post was at 11:32 AM ----------
Any Mtk Drivers Needed for pc to detact phone ????

u dont need to add twrp recovery in download section..u need to select twrp recovery in write memory...see in attached images..
Yes..u need mtk vcom drivers for detect phone..

I get this error
S_FT_ENABLE_DRAM_FAIL (0xFC0)
[EMI] Enable DRAM Failed!
[HINT] Please check your load matches to your target which is to be downloaded.

check..image instruction.. All files must be loaded..
And check u r enterd beginning adress 0x2d80000 is correct..
See instruction correctly..i think u r problem..in connecting phone...
Read instruction again..said that..press and hold vol- key then connect usb to phone..hold vol- key untill write memory ok window appears..?

Welcome

u dont need to add twrp recovery in download section..u need to select twrp recovery in write memory...see in attached images..
Yes..u need mtk vcom drivers for detect phone..

I double checked evey file and the begin adress, and i remove the battery hold vol - and connect the phone until in the status shows write memory but getting the same error in my 1+16gb

In the note section, u have mention flash SuperSU-v2.82-201705271822.zip file after write memory, this has to be done in the 9th step??

Yes..that to be done in 9th step

Yes..that to be done in 9th step

check that, r u installed vcom drivers correctly....is required for detect u r device..

Bro , TWRP successfully flashed but after flashing TWRP my moto c plus was not booting up strucking on MOTO LOGO ( I again flashed full firmware for use my phone )

Thanks for your work. I'm getting the Dram error as well.
Have double checked all the steps, using supplied cable and tried different ports on the PC.
My device is XT1723. Could it be that this version of TWRP is not correct for my device?

Kindly give proper credit

work on Xt1726 too?

After several unsuccessful attempts on XT1726, this method does not work... But, thank you for your hard work!

u need to flash super su file.. after writing the recovery provided in link.. otherwise u will bricked..read 9th step,,,,it's the problem u have facing

it's correct twrp.. i think ur problem..in drivers,, first install vcom drivers for detect the phone..

yes..thank you.. u need to first install usb vcom drivers for detect phone...

Question HELP PLEASE SAMSUNG GALAXY A23 5

Hi. I have successfully rooted magisk using odin..
I need custom recovery. Twrp recovery.
Can someone please help me,alot of webs mention about twrp download but none mentions the link which will redirect me to its official link. One member helped me few tips. But when i open the page it redirected me to twrp recovery for samsung A33 and another to samsung 52. Please can someone help me will be specially thanked.

Help me twrp forr samsung a23 4g sm235m thanks

uae timimi said:
Hi. I have successfully rooted magisk using odin..
I need custom recovery. Twrp recovery.
Can someone please help me,alot of webs mention about twrp download but none mentions the link which will redirect me to its official link. One member helped me few tips. But when i open the page it redirected me to twrp recovery for samsung A33 and another to samsung 52. Please can someone help me will be specially thanked.
Click to expand...
Click to collapse
guide me to root with odin, thanks

huongthanh8690 said:
guide me to root with odin, thanks
Click to expand...
Click to collapse
Download Samsung Galaxy A23 SM-A235F XSG United Arab Emirates firmware
All Samsung firmwares for Galaxy A23 in United Arab Emirates with model code SM-A235F. We offer free and fast download options. Check them out now.
www.sammobile.com

huongthanh8690 said:
guide me to root with odin, thanks
Click to expand...
Click to collapse
Hi.. have you done rooting ur handset?

uae timimi said:
Hi.. have you done rooting ur handset?
Click to expand...
Click to collapse
I just downloaded the ROM, no Root instructions yet

huongthanh8690 said:
I just downloaded the ROM, no Root instructions yet
Click to expand...
Click to collapse
Ok bro. Lets begin.first step is to download the stock firmware,and extract the zip file with 7zip better winrar. Copy AP file to your device internal memory.download and Install latest magisk manager app from giithub or its website in your device and patch the AP file in magisk app (select method-patch a file) and then new patched file which you got now will be saved in ur internal download folder as magisk patched.tar (i think around 6gb file).
Now on your laptop or pc move the patched.tar file to desktop and boot your mobile to download mode by switching off the device and then press nd keep holding both volume + & - buttons and connect cable to mobile and laptop and then release the buttons and your mobile will boot into download mode and press volume up button and open odin flash tool in ur laptop and untick auto reboot and tab AP and select magisk patched.tar file and click on start button. Wait for 3 mins and you can see reset PASS and you are done. And remove cable and power and volum buttons and you will get bootloader warning and finish. After that you will see your device has been wiped off and once you will complete the process of logins. Then you have to reinstall magisk app.. thank you. I hope you enjoy

uae timimi said:
Ok bro. Lets begin.first step is to download the stock firmware,and extract the zip file with 7zip better winrar. Copy AP file to your device internal memory.download and Install latest magisk manager app from giithub or its website in your device and patch the AP file in magisk app (select method-patch a file) and then new patched file which you got now will be saved in ur internal download folder as magisk patched.tar (i think around 6gb file).
Now on your laptop or pc move the patched.tar file to desktop and boot your mobile to download mode by switching off the device and then press nd keep holding both volume + & - buttons and connect cable to mobile and laptop and then release the buttons and your mobile will boot into download mode and press volume up button and open odin flash tool in ur laptop and untick auto reboot and tab AP and select magisk patched.tar file and click on start button. Wait for 3 mins and you can see reset PASS and you are done. And remove cable and power and volum buttons and you will get bootloader warning and finish. After that you will see your device has been wiped off and once you will complete the process of logins. Then you have to reinstall magisk app.. thank you. I hope you enjoy
Click to expand...
Click to collapse
Thanks, I made it!

Twrp for samsung galaxy a235m ?

uae timimi said:
Ok bro. Lets begin.first step is to download the stock firmware,and extract the zip file with 7zip better winrar. Copy AP file to your device internal memory.download and Install latest magisk manager app from giithub or its website in your device and patch the AP file in magisk app (select method-patch a file) and then new patched file which you got now will be saved in ur internal download folder as magisk patched.tar (i think around 6gb file).
Now on your laptop or pc move the patched.tar file to desktop and boot your mobile to download mode by switching off the device and then press nd keep holding both volume + & - buttons and connect cable to mobile and laptop and then release the buttons and your mobile will boot into download mode and press volume up button and open odin flash tool in ur laptop and untick auto reboot and tab AP and select magisk patched.tar file and click on start button. Wait for 3 mins and you can see reset PASS and you are done. And remove cable and power and volum buttons and you will get bootloader warning and finish. After that you will see your device has been wiped off and once you will complete the process of logins. Then you have to reinstall magisk app.. thank you. I hope you enjoy
Click to expand...
Click to collapse
Is unlocking the bootloader first not necessary?
I tried forever just to get my phone to boot into bootloader. Not even adb cmds worked. It would just do normal reboot.
Until I discovered you need to hold volume up and pwr to turn OFF the phone then immediately switch to vol down and pwr to turn back on into recovery which has the option to boot into bootloader.
And guess what!?
Selecting reboot into bootloader from recovery also makes it do a normal reboot.
There is no possible way to get to that damn bootloader.

At last! The staff opened the samsung A23 forum after I asked them, hope members and developers post beneficial stuff here.

Any help for AOSP to build LineageOS for Samsung Galaxy A23?

alex24x said:
Me ajude twrp forr samsung a23 4g sm235m obrigado
Click to expand...
Click to collapse
Mano como q instala TWRP no A23 5G ,
Já tentei de todos tipo e não consegui