I have one ls980. it stuck at LG logo when i power on/connect to wall charger/USB cable with PC. when i choose vol down and power , it show me recovery options for YES/NO but never go in recovery and again stuck on LG logo.
phone not detected in PC (i tried five different PC with Windows 7 and Windows XP) but not detected on PC even as any type of device.
I also tried UBUNTU but again it is not detected in UBUNTU.
so now kindly help me to make it working again.
I do not know that it was rooted or not or how it reached in this situation ( i purchased it from Ebay in this condition)
PLZ help
arunkarnwal1981 said:
I have one ls980. it stuck at LG logo when i power on/connect to wall charger/USB cable with PC. when i choose vol down and power , it show me recovery options for YES/NO but never go in recovery and again stuck on LG logo.
phone not detected in PC (i tried five different PC with Windows 7 and Windows XP) but not detected on PC even as any type of device.
I also tried UBUNTU but again it is not detected in UBUNTU.
so now kindly help me to make it working again.
I do not know that it was rooted or not or how it reached in this situation ( i purchased it from Ebay in this condition)
PLZ help
Click to expand...
Click to collapse
Will it enter download mode by (powered off first) holding volume up and then connecting the usb cord to PC? If it will, then you can use LG Flashtools and a TOT file (stock software) and flash it to factory setting.
Morning, im following this guide - http://forum.xda-developers.com/android/development/guide-root-method-lg-devices-t3049772 and am on the section --
=====
6.) Well that was easy , let's continue (Now that we have the files on our device we want to put our device is download mode)
(Note this method may vary from device to device)
Power off your device
When the device is powered off, hold volume up and insert a USB cable connected to the PC
Wait for the drivers to install
=====
But it just sits there on 0% telling me to not remove the the usb, it never moves. If i remove the cable i have to remove the battery to restart it and then it boots like normal. Tried 3 times now and have the same issue.
Do i just keep trying? Am i missing something?
Thanks in advance for your help.
I'm not very familiar with phone terms but the situation is like this:-
- suspected like bricked
- connect USB to computer and press Volume Up + Power = USB Logo with white load bar
- disconnect USB and turn on = Repeatedly show Asus logo
- disconnect and press Volume Up + Power = USB Logo with red bar with a splash off Asus logo and turn off (a blink an eye)
- real problem is unable to enter droidboot/fastboot
I have tried to search for the thread to solve this problem but not successful yet. Method that I have tried so far:-
- installing iSocUSB
- installing Intel driver
- installing xfstk (FW+OS failed)
- installing MFT (not know which file that be used as zip/xml)
- run adb tools command (error: device not found)
- Intel SOC appear on device manager and when connect the phone to USB, it will appear CloverView too.
- installing asus pc link
- installing PDANet
I have seen most thread and discussion mention a phrase like "press volume up + power and you will enter fastboot/droidboot" but how about IF I can't enter fastboot/droidboot; they not mention the step. What should I do to enter it? I also search for key "Z00D(ZE500CL) unable to enter droidboot/fastboot" but result from google shows as what I mention before; the phrase "press volume up + power and you will enter fastboot/droidboot" which not working on me.
can anyone help to solve this problem?
please read detail... power button + volume up not working
no solution here?
bakzlags said:
I'm not very familiar with phone terms but the situation is like this:-
- suspected like bricked
- connect USB to computer and press Volume Up + Power = USB Logo with white load bar
- disconnect USB and turn on = Repeatedly show Asus logo
- disconnect and press Volume Up + Power = USB Logo with red bar with a splash off Asus logo and turn off (a blink an eye)
- real problem is unable to enter droidboot/fastboot
I have tried to search for the thread to solve this problem but not successful yet. Method that I have tried so far:-
- installing iSocUSB
- installing Intel driver
- installing xfstk (FW+OS failed)
- installing MFT (not know which file that be used as zip/xml)
- run adb tools command (error: device not found)
- Intel SOC appear on device manager and when connect the phone to USB, it will appear CloverView too.
- installing asus pc link
- installing PDANet
I have seen most thread and discussion mention a phrase like "press volume up + power and you will enter fastboot/droidboot" but how about IF I can't enter fastboot/droidboot; they not mention the step. What should I do to enter it? I also search for key "Z00D(ZE500CL) unable to enter droidboot/fastboot" but result from google shows as what I mention before; the phrase "press volume up + power and you will enter fastboot/droidboot" which not working on me.
can anyone help to solve this problem?
please read detail... power button + volume up not working
Click to expand...
Click to collapse
you have to make xFSTK recognize the device properly.. install intel android usb driver as well along with intel soc. only way to enter fastboot is to install it temporary with xFSTK
sukhwant717 said:
you have to make xFSTK recognize the device properly.. install intel android usb driver as well along with intel soc. only way to enter fastboot is to install it temporary with xFSTK
Click to expand...
Click to collapse
how to make xFSTK recognize my device when bootloop or charging?
Did you found a solution? Same problem
waltermaffy said:
Did you found a solution? Same problem
Click to expand...
Click to collapse
first turn off your hone by holding power button more than 10 second. run xfstk, change timeout to 500 second in option. now load file and click begin download. now connect your phone to pc and. turn the phone on while pressing and holding volume down button
sukhwant717 said:
first turn off your hone by holding power button more than 10 second. run xfstk, change timeout to 500 second in option. now load file and click begin download. now connect your phone to pc and. turn the phone on while pressing and holding volume down button
Click to expand...
Click to collapse
Ok, I'll try very soon. Thank for reply.
What files did you used? there are a lot around and I'm not sure if mines could work
waltermaffy said:
Ok, I'll try very soon. Thank for reply.
What files did you used? there are a lot around and I'm not sure if mines could work
Click to expand...
Click to collapse
use what ever you have. just try again and again. you can get files from my thread. and tips too.
http://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785
sukhwant717 said:
use what ever you have. just try again and again. you can get files from my thread. and tips too.
http://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785
Click to expand...
Click to collapse
I can't solve my problem I've tried any possible files. I made a right installation of the drivers disabling signature using win10. When I turn on my phone appears "Intel inside" and I need to shut down the phone, pressing and holding power button + vol up in order to make appear usb logo that stay there for just 1 sec and then it shutdown again. Connecting my phone to the pc in that second I can make detected it and the usb logo on the phone is still there. Pressing "Begin Download" the download start but it stops after the 5%, the bar under the usb logo on the phone became red, and the log tells me "Windriver Error: 0x20000015, timeout expired" after xfstk tried to send OSIP.
I don't know if the issue could be the wrong files, or drivers, or something on the GPflags. Any help? Thanks for reading
waltermaffy said:
I can't solve my problem I've tried any possible files. I made a right installation of the drivers disabling signature using win10. When I turn on my phone appears "Intel inside" and I need to shut down the phone, pressing and holding power button + vol up in order to make appear usb logo that stay there for just 1 sec and then it shutdown again. Connecting my phone to the pc in that second I can make detected it and the usb logo on the phone is still there. Pressing "Begin Download" the download start but it stops after the 5%, the bar under the usb logo on the phone became red, and the log tells me "Windriver Error: 0x20000015, timeout expired" after xfstk tried to send OSIP.
I don't know if the issue could be the wrong files, or drivers, or something on the GPflags. Any help? Thanks for reading
Click to expand...
Click to collapse
sorry buddy i posted wrong link. i have written guide to unbrick ZE500CL and provided link for required files
---------- Post added at 07:08 PM ---------- Previous post was at 07:08 PM ----------
waltermaffy said:
I can't solve my problem I've tried any possible files. I made a right installation of the drivers disabling signature using win10. When I turn on my phone appears "Intel inside" and I need to shut down the phone, pressing and holding power button + vol up in order to make appear usb logo that stay there for just 1 sec and then it shutdown again. Connecting my phone to the pc in that second I can make detected it and the usb logo on the phone is still there. Pressing "Begin Download" the download start but it stops after the 5%, the bar under the usb logo on the phone became red, and the log tells me "Windriver Error: 0x20000015, timeout expired" after xfstk tried to send OSIP.
I don't know if the issue could be the wrong files, or drivers, or something on the GPflags. Any help? Thanks for reading
Click to expand...
Click to collapse
sorry buddy i posted wrong link. i have written guide to unbrick ZE500CL and provided link for required files
http://forum.xda-developers.com/zenfone2/general/guide-bring-to-life-zenfone-2-ze500cl-t3503144
---------- Post added at 07:10 PM ---------- Previous post was at 07:08 PM ----------
bakzlags said:
I'm not very familiar with phone terms but the situation is like this:-
- suspected like bricked
- connect USB to computer and press Volume Up + Power = USB Logo with white load bar
- disconnect USB and turn on = Repeatedly show Asus logo
- disconnect and press Volume Up + Power = USB Logo with red bar with a splash off Asus logo and turn off (a blink an eye)
- real problem is unable to enter droidboot/fastboot
I have tried to search for the thread to solve this problem but not successful yet. Method that I have tried so far:-
- installing iSocUSB
- installing Intel driver
- installing xfstk (FW+OS failed)
- installing MFT (not know which file that be used as zip/xml)
- run adb tools command (error: device not found)
- Intel SOC appear on device manager and when connect the phone to USB, it will appear CloverView too.
- installing asus pc link
- installing PDANet
I have seen most thread and discussion mention a phrase like "press volume up + power and you will enter fastboot/droidboot" but how about IF I can't enter fastboot/droidboot; they not mention the step. What should I do to enter it? I also search for key "Z00D(ZE500CL) unable to enter droidboot/fastboot" but result from google shows as what I mention before; the phrase "press volume up + power and you will enter fastboot/droidboot" which not working on me.
can anyone help to solve this problem?
please read detail... power button + volume up not working
Click to expand...
Click to collapse
sorry buddy use this link to unbrick. any question post in that thread.
http://forum.xda-developers.com/zenfone2/general/guide-bring-to-life-zenfone-2-ze500cl-t3503144
Hi,
My phone : ZE550ML
When I tried to update the TWRP recovery I installed .img file then everything collapsed.
My phone was only booting in bootloader, even if I chose normal boot.
I tried to install another .img file and since my phone doesn't want to do anything. No asus logo, no usb logo, no color nothing.
When I press power button nothing happen however how long I press even with volume button.
I charged it for a day long then I tried like a lot of times this procedure : http://forum.xda-developers.com/zenfone2/general/guide-brick-soft-hard-bricked-zenfone-2-t3284256 .
(Surprisingly when I connect my phone to my computer sometimes the xfstk software recognize it)
But I always get : FW+OS download did not complete because of limit reconnecting to device attempt number reached.
Does someone have any idea ?
hello I was trying to wipe cache data partition it took long time so i restarted the phone and from that moment my phone is just showing dead android with error blinking and my not able to go in boot options by holding volume + and power button and even tried to connect my phone to pc as soon as my phone us connected it switches on automatically and after asus logo it start blinking error.... i had installed intel usb android devices driver, isov android but still my phone is not deceted in device manger under isoc driver please help me:crying:
frkshw said:
hello I was trying to wipe cache data partition it took long time so i restarted the phone and from that moment my phone is just showing dead android with error blinking and my not able to go in boot options by holding volume + and power button and even tried to connect my phone to pc as soon as my phone us connected it switches on automatically and after asus logo it start blinking error.... i had installed intel usb android devices driver, isov android but still my phone is not deceted in device manger under isoc driver please help me:crying:
Click to expand...
Click to collapse
connect your device to pc. hold power button for 10 to 15 seconds so it turns off completely. then turn it on.
which operating system you are using?
please don't make needless thread. you could ask question in any guide available for unbrick
use the following guide. read everything carefully. and do step by step as suggested
https://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785